1/* 2 * Lite5200B board Device Tree Source 3 * 4 * Copyright 2006-2007 Secret Lab Technologies Ltd. 5 * Grant Likely <grant.likely@secretlab.ca> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13/* 14 * WARNING: Do not depend on this tree layout remaining static just yet. 15 * The MPC5200 device tree conventions are still in flux 16 * Keep an eye on the linuxppc-dev mailing list for more details 17 */ 18 19/ { 20 model = "fsl,lite5200b"; 21 // revision = "1.0"; 22 compatible = "fsl,lite5200b"; 23 #address-cells = <1>; 24 #size-cells = <1>; 25 26 cpus { 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 PowerPC,5200@0 { 31 device_type = "cpu"; 32 reg = <0>; 33 d-cache-line-size = <20>; 34 i-cache-line-size = <20>; 35 d-cache-size = <4000>; // L1, 16K 36 i-cache-size = <4000>; // L1, 16K 37 timebase-frequency = <0>; // from bootloader 38 bus-frequency = <0>; // from bootloader 39 clock-frequency = <0>; // from bootloader 40 }; 41 }; 42 43 memory { 44 device_type = "memory"; 45 reg = <00000000 10000000>; // 256MB 46 }; 47 48 soc5200@f0000000 { 49 #address-cells = <1>; 50 #size-cells = <1>; 51 model = "fsl,mpc5200b"; 52 compatible = "mpc5200"; 53 revision = ""; // from bootloader 54 device_type = "soc"; 55 ranges = <0 f0000000 0000c000>; 56 reg = <f0000000 00000100>; 57 bus-frequency = <0>; // from bootloader 58 system-frequency = <0>; // from bootloader 59 60 cdm@200 { 61 compatible = "mpc5200b-cdm","mpc5200-cdm"; 62 reg = <200 38>; 63 }; 64 65 mpc5200_pic: pic@500 { 66 // 5200 interrupts are encoded into two levels; 67 interrupt-controller; 68 #interrupt-cells = <3>; 69 device_type = "interrupt-controller"; 70 compatible = "mpc5200b-pic","mpc5200-pic"; 71 reg = <500 80>; 72 }; 73 74 gpt@600 { // General Purpose Timer 75 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 76 cell-index = <0>; 77 reg = <600 10>; 78 interrupts = <1 9 0>; 79 interrupt-parent = <&mpc5200_pic>; 80 fsl,has-wdt; 81 }; 82 83 gpt@610 { // General Purpose Timer 84 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 85 cell-index = <1>; 86 reg = <610 10>; 87 interrupts = <1 a 0>; 88 interrupt-parent = <&mpc5200_pic>; 89 }; 90 91 gpt@620 { // General Purpose Timer 92 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 93 cell-index = <2>; 94 reg = <620 10>; 95 interrupts = <1 b 0>; 96 interrupt-parent = <&mpc5200_pic>; 97 }; 98 99 gpt@630 { // General Purpose Timer 100 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 101 cell-index = <3>; 102 reg = <630 10>; 103 interrupts = <1 c 0>; 104 interrupt-parent = <&mpc5200_pic>; 105 }; 106 107 gpt@640 { // General Purpose Timer 108 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 109 cell-index = <4>; 110 reg = <640 10>; 111 interrupts = <1 d 0>; 112 interrupt-parent = <&mpc5200_pic>; 113 }; 114 115 gpt@650 { // General Purpose Timer 116 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 117 cell-index = <5>; 118 reg = <650 10>; 119 interrupts = <1 e 0>; 120 interrupt-parent = <&mpc5200_pic>; 121 }; 122 123 gpt@660 { // General Purpose Timer 124 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 125 cell-index = <6>; 126 reg = <660 10>; 127 interrupts = <1 f 0>; 128 interrupt-parent = <&mpc5200_pic>; 129 }; 130 131 gpt@670 { // General Purpose Timer 132 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 133 cell-index = <7>; 134 reg = <670 10>; 135 interrupts = <1 10 0>; 136 interrupt-parent = <&mpc5200_pic>; 137 }; 138 139 rtc@800 { // Real time clock 140 compatible = "mpc5200b-rtc","mpc5200-rtc"; 141 device_type = "rtc"; 142 reg = <800 100>; 143 interrupts = <1 5 0 1 6 0>; 144 interrupt-parent = <&mpc5200_pic>; 145 }; 146 147 mscan@900 { 148 device_type = "mscan"; 149 compatible = "mpc5200b-mscan","mpc5200-mscan"; 150 cell-index = <0>; 151 interrupts = <2 11 0>; 152 interrupt-parent = <&mpc5200_pic>; 153 reg = <900 80>; 154 }; 155 156 mscan@980 { 157 device_type = "mscan"; 158 compatible = "mpc5200b-mscan","mpc5200-mscan"; 159 cell-index = <1>; 160 interrupts = <2 12 0>; 161 interrupt-parent = <&mpc5200_pic>; 162 reg = <980 80>; 163 }; 164 165 gpio@b00 { 166 compatible = "mpc5200b-gpio","mpc5200-gpio"; 167 reg = <b00 40>; 168 interrupts = <1 7 0>; 169 interrupt-parent = <&mpc5200_pic>; 170 }; 171 172 gpio-wkup@c00 { 173 compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; 174 reg = <c00 40>; 175 interrupts = <1 8 0 0 3 0>; 176 interrupt-parent = <&mpc5200_pic>; 177 }; 178 179 spi@f00 { 180 device_type = "spi"; 181 compatible = "mpc5200b-spi","mpc5200-spi"; 182 reg = <f00 20>; 183 interrupts = <2 d 0 2 e 0>; 184 interrupt-parent = <&mpc5200_pic>; 185 }; 186 187 usb@1000 { 188 device_type = "usb-ohci-be"; 189 compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; 190 reg = <1000 ff>; 191 interrupts = <2 6 0>; 192 interrupt-parent = <&mpc5200_pic>; 193 }; 194 195 bestcomm@1200 { 196 device_type = "dma-controller"; 197 compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; 198 reg = <1200 80>; 199 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 200 3 4 0 3 5 0 3 6 0 3 7 0 201 3 8 0 3 9 0 3 a 0 3 b 0 202 3 c 0 3 d 0 3 e 0 3 f 0>; 203 interrupt-parent = <&mpc5200_pic>; 204 }; 205 206 xlb@1f00 { 207 compatible = "mpc5200b-xlb","mpc5200-xlb"; 208 reg = <1f00 100>; 209 }; 210 211 serial@2000 { // PSC1 212 device_type = "serial"; 213 compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 214 port-number = <0>; // Logical port assignment 215 cell-index = <0>; 216 reg = <2000 100>; 217 interrupts = <2 1 0>; 218 interrupt-parent = <&mpc5200_pic>; 219 }; 220 221 // PSC2 in ac97 mode example 222 //ac97@2200 { // PSC2 223 // device_type = "sound"; 224 // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97"; 225 // cell-index = <1>; 226 // reg = <2200 100>; 227 // interrupts = <2 2 0>; 228 // interrupt-parent = <&mpc5200_pic>; 229 //}; 230 231 // PSC3 in CODEC mode example 232 //i2s@2400 { // PSC3 233 // device_type = "sound"; 234 // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible 235 // cell-index = <2>; 236 // reg = <2400 100>; 237 // interrupts = <2 3 0>; 238 // interrupt-parent = <&mpc5200_pic>; 239 //}; 240 241 // PSC4 in uart mode example 242 //serial@2600 { // PSC4 243 // device_type = "serial"; 244 // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 245 // cell-index = <3>; 246 // reg = <2600 100>; 247 // interrupts = <2 b 0>; 248 // interrupt-parent = <&mpc5200_pic>; 249 //}; 250 251 // PSC5 in uart mode example 252 //serial@2800 { // PSC5 253 // device_type = "serial"; 254 // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; 255 // cell-index = <4>; 256 // reg = <2800 100>; 257 // interrupts = <2 c 0>; 258 // interrupt-parent = <&mpc5200_pic>; 259 //}; 260 261 // PSC6 in spi mode example 262 //spi@2c00 { // PSC6 263 // device_type = "spi"; 264 // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; 265 // cell-index = <5>; 266 // reg = <2c00 100>; 267 // interrupts = <2 4 0>; 268 // interrupt-parent = <&mpc5200_pic>; 269 //}; 270 271 ethernet@3000 { 272 device_type = "network"; 273 compatible = "mpc5200b-fec","mpc5200-fec"; 274 reg = <3000 400>; 275 mac-address = [ 02 03 04 05 06 07 ]; // Bad! 276 interrupts = <2 5 0>; 277 interrupt-parent = <&mpc5200_pic>; 278 phy-handle = <&phy0>; 279 }; 280 281 mdio@3000 { 282 #address-cells = <1>; 283 #size-cells = <0>; 284 device_type = "mdio"; 285 compatible = "mpc5200b-fec-phy"; 286 reg = <3000 400>; // fec range, since we need to setup fec interrupts 287 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. 288 interrupt-parent = <&mpc5200_pic>; 289 290 phy0:ethernet-phy@0 { 291 device_type = "ethernet-phy"; 292 reg = <0>; 293 }; 294 }; 295 296 ata@3a00 { 297 device_type = "ata"; 298 compatible = "mpc5200b-ata","mpc5200-ata"; 299 reg = <3a00 100>; 300 interrupts = <2 7 0>; 301 interrupt-parent = <&mpc5200_pic>; 302 }; 303 304 i2c@3d00 { 305 #address-cells = <1>; 306 #size-cells = <0>; 307 compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; 308 cell-index = <0>; 309 reg = <3d00 40>; 310 interrupts = <2 f 0>; 311 interrupt-parent = <&mpc5200_pic>; 312 fsl5200-clocking; 313 }; 314 315 i2c@3d40 { 316 #address-cells = <1>; 317 #size-cells = <0>; 318 compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; 319 cell-index = <1>; 320 reg = <3d40 40>; 321 interrupts = <2 10 0>; 322 interrupt-parent = <&mpc5200_pic>; 323 fsl5200-clocking; 324 }; 325 sram@8000 { 326 device_type = "sram"; 327 compatible = "mpc5200b-sram","mpc5200-sram","sram"; 328 reg = <8000 4000>; 329 }; 330 }; 331 332 pci@f0000d00 { 333 #interrupt-cells = <1>; 334 #size-cells = <2>; 335 #address-cells = <3>; 336 device_type = "pci"; 337 compatible = "mpc5200b-pci","mpc5200-pci"; 338 reg = <f0000d00 100>; 339 interrupt-map-mask = <f800 0 0 7>; 340 interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 341 c000 0 0 2 &mpc5200_pic 1 1 3 342 c000 0 0 3 &mpc5200_pic 1 2 3 343 c000 0 0 4 &mpc5200_pic 1 3 3 344 345 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot 346 c800 0 0 2 &mpc5200_pic 1 2 3 347 c800 0 0 3 &mpc5200_pic 1 3 3 348 c800 0 0 4 &mpc5200_pic 0 0 3>; 349 clock-frequency = <0>; // From boot loader 350 interrupts = <2 8 0 2 9 0 2 a 0>; 351 interrupt-parent = <&mpc5200_pic>; 352 bus-range = <0 0>; 353 ranges = <42000000 0 80000000 80000000 0 20000000 354 02000000 0 a0000000 a0000000 0 10000000 355 01000000 0 00000000 b0000000 0 01000000>; 356 }; 357}; 358