1/* 2 * Device Tree Souce for Buffalo KuroboxHG 3 * 4 * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use 5 * the default configuration linkstation_defconfig. 6 * 7 * Based on sandpoint.dts 8 * 9 * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> 10 * Copyright 2008 Freescale Semiconductor, Inc. 11 * 12 * This file is licensed under 13 * the terms of the GNU General Public License version 2. This program 14 * is licensed "as is" without any warranty of any kind, whether express 15 * or implied. 16 17XXXX add flash parts, rtc, ?? 18 19 */ 20 21/dts-v1/; 22 23/ { 24 model = "KuroboxHG"; 25 compatible = "linkstation"; 26 #address-cells = <1>; 27 #size-cells = <1>; 28 29 aliases { 30 serial0 = &serial0; 31 serial1 = &serial1; 32 pci0 = &pci0; 33 }; 34 35 cpus { 36 #address-cells = <1>; 37 #size-cells = <0>; 38 39 PowerPC,603e { /* Really 8241 */ 40 device_type = "cpu"; 41 reg = <0x0>; 42 clock-frequency = <266000000>; /* Fixed by bootloader */ 43 timebase-frequency = <32522240>; /* Fixed by bootloader */ 44 bus-frequency = <0>; /* Fixed by bootloader */ 45 /* Following required by dtc but not used */ 46 i-cache-size = <0x4000>; 47 d-cache-size = <0x4000>; 48 }; 49 }; 50 51 memory { 52 device_type = "memory"; 53 reg = <0x0 0x8000000>; 54 }; 55 56 soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ 57 #address-cells = <1>; 58 #size-cells = <1>; 59 device_type = "soc"; 60 compatible = "mpc10x"; 61 store-gathering = <0>; /* 0 == off, !0 == on */ 62 reg = <0x80000000 0x100000>; 63 ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ 64 0xfc000000 0xfc000000 0x100000 /* EUMB */ 65 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ 66 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ 67 0xfef00000 0xfef00000 0x100000>; /* pci iack */ 68 69 i2c@80003000 { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 cell-index = <0>; 73 compatible = "fsl-i2c"; 74 reg = <0x80003000 0x1000>; 75 interrupts = <5 2>; 76 interrupt-parent = <&mpic>; 77 78 rtc@32 { 79 device_type = "rtc"; 80 compatible = "ricoh,rs5c372a"; 81 reg = <0x32>; 82 }; 83 }; 84 85 serial0: serial@80004500 { 86 cell-index = <0>; 87 device_type = "serial"; 88 compatible = "ns16550"; 89 reg = <0x80004500 0x8>; 90 clock-frequency = <130041000>; 91 current-speed = <9600>; 92 interrupts = <9 0>; 93 interrupt-parent = <&mpic>; 94 }; 95 96 serial1: serial@80004600 { 97 cell-index = <1>; 98 device_type = "serial"; 99 compatible = "ns16550"; 100 reg = <0x80004600 0x8>; 101 clock-frequency = <130041000>; 102 current-speed = <57600>; 103 interrupts = <10 0>; 104 interrupt-parent = <&mpic>; 105 }; 106 107 mpic: interrupt-controller@80040000 { 108 #interrupt-cells = <2>; 109 #address-cells = <0>; 110 device_type = "open-pic"; 111 compatible = "chrp,open-pic"; 112 interrupt-controller; 113 reg = <0x80040000 0x40000>; 114 }; 115 116 pci0: pci@fec00000 { 117 #address-cells = <3>; 118 #size-cells = <2>; 119 #interrupt-cells = <1>; 120 device_type = "pci"; 121 compatible = "mpc10x-pci"; 122 reg = <0xfec00000 0x400000>; 123 ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 124 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; 125 bus-range = <0 255>; 126 clock-frequency = <133333333>; 127 interrupt-parent = <&mpic>; 128 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 129 interrupt-map = < 130 /* IDSEL 11 - IRQ0 ETH */ 131 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 132 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 133 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 134 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 135 /* IDSEL 12 - IRQ1 IDE0 */ 136 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 137 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 138 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 139 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 140 /* IDSEL 14 - IRQ3 USB2.0 */ 141 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 142 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 143 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 144 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 145 >; 146 }; 147 }; 148}; 149