1/* 2 * Device Tree Source for AMCC Katmai eval board 3 * 4 * Copyright (c) 2006, 2007 IBM Corp. 5 * Benjamin Herrenschmidt <benh@kernel.crashing.org> 6 * 7 * Copyright (c) 2006, 2007 IBM Corp. 8 * Josh Boyer <jwboyer@linux.vnet.ibm.com> 9 * 10 * This file is licensed under the terms of the GNU General Public 11 * License version 2. This program is licensed "as is" without 12 * any warranty of any kind, whether express or implied. 13 */ 14 15/ { 16 #address-cells = <2>; 17 #size-cells = <1>; 18 model = "amcc,katmai"; 19 compatible = "amcc,katmai"; 20 dcr-parent = <&/cpus/cpu@0>; 21 22 aliases { 23 ethernet0 = &EMAC0; 24 serial0 = &UART0; 25 serial1 = &UART1; 26 serial2 = &UART2; 27 }; 28 29 cpus { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 33 cpu@0 { 34 device_type = "cpu"; 35 model = "PowerPC,440SPe"; 36 reg = <0>; 37 clock-frequency = <0>; /* Filled in by zImage */ 38 timebase-frequency = <0>; /* Filled in by zImage */ 39 i-cache-line-size = <20>; 40 d-cache-line-size = <20>; 41 i-cache-size = <20000>; 42 d-cache-size = <20000>; 43 dcr-controller; 44 dcr-access-method = "native"; 45 }; 46 }; 47 48 memory { 49 device_type = "memory"; 50 reg = <0 0 0>; /* Filled in by zImage */ 51 }; 52 53 UIC0: interrupt-controller0 { 54 compatible = "ibm,uic-440spe","ibm,uic"; 55 interrupt-controller; 56 cell-index = <0>; 57 dcr-reg = <0c0 009>; 58 #address-cells = <0>; 59 #size-cells = <0>; 60 #interrupt-cells = <2>; 61 }; 62 63 UIC1: interrupt-controller1 { 64 compatible = "ibm,uic-440spe","ibm,uic"; 65 interrupt-controller; 66 cell-index = <1>; 67 dcr-reg = <0d0 009>; 68 #address-cells = <0>; 69 #size-cells = <0>; 70 #interrupt-cells = <2>; 71 interrupts = <1e 4 1f 4>; /* cascade */ 72 interrupt-parent = <&UIC0>; 73 }; 74 75 UIC2: interrupt-controller2 { 76 compatible = "ibm,uic-440spe","ibm,uic"; 77 interrupt-controller; 78 cell-index = <2>; 79 dcr-reg = <0e0 009>; 80 #address-cells = <0>; 81 #size-cells = <0>; 82 #interrupt-cells = <2>; 83 interrupts = <a 4 b 4>; /* cascade */ 84 interrupt-parent = <&UIC0>; 85 }; 86 87 UIC3: interrupt-controller3 { 88 compatible = "ibm,uic-440spe","ibm,uic"; 89 interrupt-controller; 90 cell-index = <3>; 91 dcr-reg = <0f0 009>; 92 #address-cells = <0>; 93 #size-cells = <0>; 94 #interrupt-cells = <2>; 95 interrupts = <10 4 11 4>; /* cascade */ 96 interrupt-parent = <&UIC0>; 97 }; 98 99 SDR0: sdr { 100 compatible = "ibm,sdr-440spe"; 101 dcr-reg = <00e 002>; 102 }; 103 104 CPR0: cpr { 105 compatible = "ibm,cpr-440spe"; 106 dcr-reg = <00c 002>; 107 }; 108 109 plb { 110 compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; 111 #address-cells = <2>; 112 #size-cells = <1>; 113 ranges; 114 clock-frequency = <0>; /* Filled in by zImage */ 115 116 SDRAM0: sdram { 117 compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; 118 dcr-reg = <010 2>; 119 }; 120 121 MAL0: mcmal { 122 compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; 123 dcr-reg = <180 62>; 124 num-tx-chans = <2>; 125 num-rx-chans = <1>; 126 interrupt-parent = <&MAL0>; 127 interrupts = <0 1 2 3 4>; 128 #interrupt-cells = <1>; 129 #address-cells = <0>; 130 #size-cells = <0>; 131 interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 132 /*RXEOB*/ 1 &UIC1 7 4 133 /*SERR*/ 2 &UIC1 1 4 134 /*TXDE*/ 3 &UIC1 2 4 135 /*RXDE*/ 4 &UIC1 3 4>; 136 }; 137 138 POB0: opb { 139 compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; 140 #address-cells = <1>; 141 #size-cells = <1>; 142 ranges = <00000000 4 e0000000 20000000>; 143 clock-frequency = <0>; /* Filled in by zImage */ 144 145 EBC0: ebc { 146 compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; 147 dcr-reg = <012 2>; 148 #address-cells = <2>; 149 #size-cells = <1>; 150 clock-frequency = <0>; /* Filled in by zImage */ 151 interrupts = <5 1>; 152 interrupt-parent = <&UIC1>; 153 }; 154 155 UART0: serial@10000200 { 156 device_type = "serial"; 157 compatible = "ns16550"; 158 reg = <10000200 8>; 159 virtual-reg = <a0000200>; 160 clock-frequency = <0>; /* Filled in by zImage */ 161 current-speed = <1c200>; 162 interrupt-parent = <&UIC0>; 163 interrupts = <0 4>; 164 }; 165 166 UART1: serial@10000300 { 167 device_type = "serial"; 168 compatible = "ns16550"; 169 reg = <10000300 8>; 170 virtual-reg = <a0000300>; 171 clock-frequency = <0>; 172 current-speed = <0>; 173 interrupt-parent = <&UIC0>; 174 interrupts = <1 4>; 175 }; 176 177 178 UART2: serial@10000600 { 179 device_type = "serial"; 180 compatible = "ns16550"; 181 reg = <10000600 8>; 182 virtual-reg = <a0000600>; 183 clock-frequency = <0>; 184 current-speed = <0>; 185 interrupt-parent = <&UIC1>; 186 interrupts = <5 4>; 187 }; 188 189 IIC0: i2c@10000400 { 190 compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; 191 reg = <10000400 14>; 192 interrupt-parent = <&UIC0>; 193 interrupts = <2 4>; 194 }; 195 196 IIC1: i2c@10000500 { 197 compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; 198 reg = <10000500 14>; 199 interrupt-parent = <&UIC0>; 200 interrupts = <3 4>; 201 }; 202 203 EMAC0: ethernet@10000800 { 204 linux,network-index = <0>; 205 device_type = "network"; 206 compatible = "ibm,emac-440spe", "ibm,emac4"; 207 interrupt-parent = <&UIC1>; 208 interrupts = <1c 4 1d 4>; 209 reg = <10000800 70>; 210 local-mac-address = [000000000000]; 211 mal-device = <&MAL0>; 212 mal-tx-channel = <0>; 213 mal-rx-channel = <0>; 214 cell-index = <0>; 215 max-frame-size = <5dc>; 216 rx-fifo-size = <1000>; 217 tx-fifo-size = <800>; 218 phy-mode = "gmii"; 219 phy-map = <00000000>; 220 has-inverted-stacr-oc; 221 has-new-stacr-staopc; 222 }; 223 }; 224 225 PCIX0: pci@c0ec00000 { 226 device_type = "pci"; 227 #interrupt-cells = <1>; 228 #size-cells = <2>; 229 #address-cells = <3>; 230 compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; 231 primary; 232 large-inbound-windows; 233 enable-msi-hole; 234 reg = <c 0ec00000 8 /* Config space access */ 235 0 0 0 /* no IACK cycles */ 236 c 0ed00000 4 /* Special cycles */ 237 c 0ec80000 100 /* Internal registers */ 238 c 0ec80100 fc>; /* Internal messaging registers */ 239 240 /* Outbound ranges, one memory and one IO, 241 * later cannot be changed 242 */ 243 ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 244 01000000 0 00000000 0000000c 08000000 0 00010000>; 245 246 /* Inbound 2GB range starting at 0 */ 247 dma-ranges = <42000000 0 0 0 0 0 80000000>; 248 249 /* This drives busses 0 to 0xf */ 250 bus-range = <0 f>; 251 252 /* 253 * On Katmai, the following PCI-X interrupts signals 254 * have to be enabled via jumpers (only INTA is 255 * enabled per default): 256 * 257 * INTB: J3: 1-2 258 * INTC: J2: 1-2 259 * INTD: J1: 1-2 260 */ 261 interrupt-map-mask = <f800 0 0 7>; 262 interrupt-map = < 263 /* IDSEL 1 */ 264 0800 0 0 1 &UIC1 14 8 265 0800 0 0 2 &UIC1 13 8 266 0800 0 0 3 &UIC1 12 8 267 0800 0 0 4 &UIC1 11 8 268 >; 269 }; 270 271 PCIE0: pciex@d00000000 { 272 device_type = "pci"; 273 #interrupt-cells = <1>; 274 #size-cells = <2>; 275 #address-cells = <3>; 276 compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; 277 primary; 278 port = <0>; /* port number */ 279 reg = <d 00000000 20000000 /* Config space access */ 280 c 10000000 00001000>; /* Registers */ 281 dcr-reg = <100 020>; 282 sdr-base = <300>; 283 284 /* Outbound ranges, one memory and one IO, 285 * later cannot be changed 286 */ 287 ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 288 01000000 0 00000000 0000000f 80000000 0 00010000>; 289 290 /* Inbound 2GB range starting at 0 */ 291 dma-ranges = <42000000 0 0 0 0 0 80000000>; 292 293 /* This drives busses 10 to 0x1f */ 294 bus-range = <10 1f>; 295 296 /* Legacy interrupts (note the weird polarity, the bridge seems 297 * to invert PCIe legacy interrupts). 298 * We are de-swizzling here because the numbers are actually for 299 * port of the root complex virtual P2P bridge. But I want 300 * to avoid putting a node for it in the tree, so the numbers 301 * below are basically de-swizzled numbers. 302 * The real slot is on idsel 0, so the swizzling is 1:1 303 */ 304 interrupt-map-mask = <0000 0 0 7>; 305 interrupt-map = < 306 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ 307 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ 308 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ 309 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; 310 }; 311 312 PCIE1: pciex@d20000000 { 313 device_type = "pci"; 314 #interrupt-cells = <1>; 315 #size-cells = <2>; 316 #address-cells = <3>; 317 compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; 318 primary; 319 port = <1>; /* port number */ 320 reg = <d 20000000 20000000 /* Config space access */ 321 c 10001000 00001000>; /* Registers */ 322 dcr-reg = <120 020>; 323 sdr-base = <340>; 324 325 /* Outbound ranges, one memory and one IO, 326 * later cannot be changed 327 */ 328 ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 329 01000000 0 00000000 0000000f 80010000 0 00010000>; 330 331 /* Inbound 2GB range starting at 0 */ 332 dma-ranges = <42000000 0 0 0 0 0 80000000>; 333 334 /* This drives busses 10 to 0x1f */ 335 bus-range = <20 2f>; 336 337 /* Legacy interrupts (note the weird polarity, the bridge seems 338 * to invert PCIe legacy interrupts). 339 * We are de-swizzling here because the numbers are actually for 340 * port of the root complex virtual P2P bridge. But I want 341 * to avoid putting a node for it in the tree, so the numbers 342 * below are basically de-swizzled numbers. 343 * The real slot is on idsel 0, so the swizzling is 1:1 344 */ 345 interrupt-map-mask = <0000 0 0 7>; 346 interrupt-map = < 347 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ 348 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ 349 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ 350 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; 351 }; 352 353 PCIE2: pciex@d40000000 { 354 device_type = "pci"; 355 #interrupt-cells = <1>; 356 #size-cells = <2>; 357 #address-cells = <3>; 358 compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; 359 primary; 360 port = <2>; /* port number */ 361 reg = <d 40000000 20000000 /* Config space access */ 362 c 10002000 00001000>; /* Registers */ 363 dcr-reg = <140 020>; 364 sdr-base = <370>; 365 366 /* Outbound ranges, one memory and one IO, 367 * later cannot be changed 368 */ 369 ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 370 01000000 0 00000000 0000000f 80020000 0 00010000>; 371 372 /* Inbound 2GB range starting at 0 */ 373 dma-ranges = <42000000 0 0 0 0 0 80000000>; 374 375 /* This drives busses 10 to 0x1f */ 376 bus-range = <30 3f>; 377 378 /* Legacy interrupts (note the weird polarity, the bridge seems 379 * to invert PCIe legacy interrupts). 380 * We are de-swizzling here because the numbers are actually for 381 * port of the root complex virtual P2P bridge. But I want 382 * to avoid putting a node for it in the tree, so the numbers 383 * below are basically de-swizzled numbers. 384 * The real slot is on idsel 0, so the swizzling is 1:1 385 */ 386 interrupt-map-mask = <0000 0 0 7>; 387 interrupt-map = < 388 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ 389 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ 390 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ 391 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; 392 }; 393 }; 394 395 chosen { 396 linux,stdout-path = "/plb/opb/serial@10000200"; 397 }; 398}; 399