1/*
2 * Device Tree Source for Mosaix Technologies, Inc. ICON board
3 *
4 * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2.  This program is licensed "as is" without
8 * any warranty of any kind, whether express or implied.
9 */
10
11/dts-v1/;
12
13/ {
14	#address-cells = <2>;
15	#size-cells = <2>;
16	model = "mosaixtech,icon";
17	compatible = "mosaixtech,icon";
18	dcr-parent = <&{/cpus/cpu@0}>;
19
20	aliases {
21		ethernet0 = &EMAC0;
22		serial0 = &UART0;
23		serial1 = &UART1;
24		serial2 = &UART2;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		cpu@0 {
32			device_type = "cpu";
33			model = "PowerPC,440SPe";
34			reg = <0x00000000>;
35			clock-frequency = <0>; /* Filled in by U-Boot */
36			timebase-frequency = <0>; /* Filled in by U-Boot */
37			i-cache-line-size = <32>;
38			d-cache-line-size = <32>;
39			i-cache-size = <32768>;
40			d-cache-size = <32768>;
41			dcr-controller;
42			dcr-access-method = "native";
43			reset-type = <2>;	/* Use chip-reset */
44		};
45	};
46
47	memory {
48		device_type = "memory";
49		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
50	};
51
52	UIC0: interrupt-controller0 {
53		compatible = "ibm,uic-440spe","ibm,uic";
54		interrupt-controller;
55		cell-index = <0>;
56		dcr-reg = <0x0c0 0x009>;
57		#address-cells = <0>;
58		#size-cells = <0>;
59		#interrupt-cells = <2>;
60	};
61
62	UIC1: interrupt-controller1 {
63		compatible = "ibm,uic-440spe","ibm,uic";
64		interrupt-controller;
65		cell-index = <1>;
66		dcr-reg = <0x0d0 0x009>;
67		#address-cells = <0>;
68		#size-cells = <0>;
69		#interrupt-cells = <2>;
70		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
71		interrupt-parent = <&UIC0>;
72	};
73
74	UIC2: interrupt-controller2 {
75		compatible = "ibm,uic-440spe","ibm,uic";
76		interrupt-controller;
77		cell-index = <2>;
78		dcr-reg = <0x0e0 0x009>;
79		#address-cells = <0>;
80		#size-cells = <0>;
81		#interrupt-cells = <2>;
82		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
83		interrupt-parent = <&UIC0>;
84	};
85
86	UIC3: interrupt-controller3 {
87		compatible = "ibm,uic-440spe","ibm,uic";
88		interrupt-controller;
89		cell-index = <3>;
90		dcr-reg = <0x0f0 0x009>;
91		#address-cells = <0>;
92		#size-cells = <0>;
93		#interrupt-cells = <2>;
94		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
95		interrupt-parent = <&UIC0>;
96	};
97
98	SDR0: sdr {
99		compatible = "ibm,sdr-440spe";
100		dcr-reg = <0x00e 0x002>;
101	};
102
103	CPR0: cpr {
104		compatible = "ibm,cpr-440spe";
105		dcr-reg = <0x00c 0x002>;
106	};
107
108	MQ0: mq {
109		compatible = "ibm,mq-440spe";
110		dcr-reg = <0x040 0x020>;
111	};
112
113	plb {
114		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
115		#address-cells = <2>;
116		#size-cells = <1>;
117		/*        addr-child     addr-parent    size */
118		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
119			  0x4 0x00200000 0x4 0x00200000 0x00000400
120			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
121			  0xc 0x00000000 0xc 0x00000000 0x20000000
122			  0xd 0x00000000 0xd 0x00000000 0x80000000
123			  0xd 0x80000000 0xd 0x80000000 0x80000000
124			  0xe 0x00000000 0xe 0x00000000 0x80000000
125			  0xe 0x80000000 0xe 0x80000000 0x80000000
126			  0xf 0x00000000 0xf 0x00000000 0x80000000
127			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
128		clock-frequency = <0>; /* Filled in by U-Boot */
129
130		SDRAM0: sdram {
131			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
132			dcr-reg = <0x010 0x002>;
133		};
134
135		MAL0: mcmal {
136			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
137			dcr-reg = <0x180 0x062>;
138			num-tx-chans = <2>;
139			num-rx-chans = <1>;
140			interrupt-parent = <&MAL0>;
141			interrupts = <0x0 0x1 0x2 0x3 0x4>;
142			#interrupt-cells = <1>;
143			#address-cells = <0>;
144			#size-cells = <0>;
145			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
146					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
147					 /*SERR*/  0x2 &UIC1 0x1 0x4
148					 /*TXDE*/  0x3 &UIC1 0x2 0x4
149					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
150		};
151
152		POB0: opb {
153			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
154			#address-cells = <1>;
155			#size-cells = <1>;
156			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
157			clock-frequency = <0>; /* Filled in by U-Boot */
158
159			EBC0: ebc {
160				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
161				dcr-reg = <0x012 0x002>;
162				#address-cells = <2>;
163				#size-cells = <1>;
164				clock-frequency = <0>; /* Filled in by U-Boot */
165				/* ranges property is supplied by U-Boot */
166				interrupts = <0x5 0x1>;
167				interrupt-parent = <&UIC1>;
168
169				nor_flash@0,0 {
170					compatible = "cfi-flash";
171					bank-width = <2>;
172					reg = <0x00000000 0x00000000 0x01000000>;
173					#address-cells = <1>;
174					#size-cells = <1>;
175					partition@0 {
176						label = "kernel";
177						reg = <0x00000000 0x001e0000>;
178					};
179					partition@1e0000 {
180						label = "dtb";
181						reg = <0x001e0000 0x00020000>;
182					};
183					partition@200000 {
184						label = "root";
185						reg = <0x00200000 0x00200000>;
186					};
187					partition@400000 {
188						label = "user";
189						reg = <0x00400000 0x00b60000>;
190					};
191					partition@f60000 {
192						label = "env";
193						reg = <0x00f60000 0x00040000>;
194					};
195					partition@fa0000 {
196						label = "u-boot";
197						reg = <0x00fa0000 0x00060000>;
198					};
199				};
200
201				SysACE_CompactFlash: sysace@1,0 {
202					compatible = "xlnx,sysace";
203					interrupt-parent = <&UIC2>;
204					interrupts = <24 0x4>;
205					reg = <0x00000001 0x00000000 0x10000>;
206				};
207			};
208
209			UART0: serial@f0000200 {
210				device_type = "serial";
211				compatible = "ns16550";
212				reg = <0xf0000200 0x00000008>;
213				virtual-reg = <0xa0000200>;
214				clock-frequency = <0>; /* Filled in by U-Boot */
215				current-speed = <115200>;
216				interrupt-parent = <&UIC0>;
217				interrupts = <0x0 0x4>;
218			};
219
220			UART1: serial@f0000300 {
221				device_type = "serial";
222				compatible = "ns16550";
223				reg = <0xf0000300 0x00000008>;
224				virtual-reg = <0xa0000300>;
225				clock-frequency = <0>;
226				current-speed = <0>;
227				interrupt-parent = <&UIC0>;
228				interrupts = <0x1 0x4>;
229			};
230
231
232			UART2: serial@f0000600 {
233				device_type = "serial";
234				compatible = "ns16550";
235				reg = <0xf0000600 0x00000008>;
236				virtual-reg = <0xa0000600>;
237				clock-frequency = <0>;
238				current-speed = <0>;
239				interrupt-parent = <&UIC1>;
240				interrupts = <0x5 0x4>;
241			};
242
243			IIC0: i2c@f0000400 {
244				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
245				reg = <0xf0000400 0x00000014>;
246				interrupt-parent = <&UIC0>;
247				interrupts = <0x2 0x4>;
248			};
249
250			IIC1: i2c@f0000500 {
251				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
252				reg = <0xf0000500 0x00000014>;
253				interrupt-parent = <&UIC0>;
254				interrupts = <0x3 0x4>;
255				#address-cells = <1>;
256				#size-cells = <0>;
257
258                                rtc@68 {
259                                        compatible = "stm,m41t00";
260                                        reg = <0x68>;
261                                };
262			};
263
264			EMAC0: ethernet@f0000800 {
265				linux,network-index = <0x0>;
266				device_type = "network";
267				compatible = "ibm,emac-440spe", "ibm,emac4";
268				interrupt-parent = <&UIC1>;
269				interrupts = <0x1c 0x4 0x1d 0x4>;
270				reg = <0xf0000800 0x00000074>;
271				local-mac-address = [000000000000];
272				mal-device = <&MAL0>;
273				mal-tx-channel = <0>;
274				mal-rx-channel = <0>;
275				cell-index = <0>;
276				max-frame-size = <9000>;
277				rx-fifo-size = <4096>;
278				tx-fifo-size = <2048>;
279				phy-mode = "gmii";
280				phy-map = <0x00000000>;
281				has-inverted-stacr-oc;
282				has-new-stacr-staopc;
283			};
284		};
285
286		PCIX0: pci@c0ec00000 {
287			device_type = "pci";
288			#interrupt-cells = <1>;
289			#size-cells = <2>;
290			#address-cells = <3>;
291			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
292			primary;
293			large-inbound-windows;
294			enable-msi-hole;
295			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
296			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
297			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
298			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
299			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
300
301			/* Outbound ranges, one memory and one IO,
302			 * later cannot be changed
303			 */
304			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
305				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
306
307			/* Inbound 4GB range starting at 0 */
308			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
309
310			/* This drives busses 0 to 0xf */
311			bus-range = <0x0 0xf>;
312
313			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
314			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
315			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
316		};
317
318		PCIE0: pciex@d00000000 {
319			device_type = "pci";
320			#interrupt-cells = <1>;
321			#size-cells = <2>;
322			#address-cells = <3>;
323			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
324			primary;
325			port = <0x0>; /* port number */
326			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
327			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
328			dcr-reg = <0x100 0x020>;
329			sdr-base = <0x300>;
330
331			/* Outbound ranges, one memory and one IO,
332			 * later cannot be changed
333			 */
334			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
335				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
336
337			/* Inbound 4GB range starting at 0 */
338			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
339
340			/* This drives busses 0x10 to 0x1f */
341			bus-range = <0x10 0x1f>;
342
343			/* Legacy interrupts (note the weird polarity, the bridge seems
344			 * to invert PCIe legacy interrupts).
345			 * We are de-swizzling here because the numbers are actually for
346			 * port of the root complex virtual P2P bridge. But I want
347			 * to avoid putting a node for it in the tree, so the numbers
348			 * below are basically de-swizzled numbers.
349			 * The real slot is on idsel 0, so the swizzling is 1:1
350			 */
351			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
352			interrupt-map = <
353				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
354				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
355				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
356				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
357		};
358
359		PCIE1: pciex@d20000000 {
360			device_type = "pci";
361			#interrupt-cells = <1>;
362			#size-cells = <2>;
363			#address-cells = <3>;
364			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
365			primary;
366			port = <0x1>; /* port number */
367			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
368			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
369			dcr-reg = <0x120 0x020>;
370			sdr-base = <0x340>;
371
372			/* Outbound ranges, one memory and one IO,
373			 * later cannot be changed
374			 */
375			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
376				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
377
378			/* Inbound 4GB range starting at 0 */
379			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
380
381			/* This drives busses 0x20 to 0x2f */
382			bus-range = <0x20 0x2f>;
383
384			/* Legacy interrupts (note the weird polarity, the bridge seems
385			 * to invert PCIe legacy interrupts).
386			 * We are de-swizzling here because the numbers are actually for
387			 * port of the root complex virtual P2P bridge. But I want
388			 * to avoid putting a node for it in the tree, so the numbers
389			 * below are basically de-swizzled numbers.
390			 * The real slot is on idsel 0, so the swizzling is 1:1
391			 */
392			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
393			interrupt-map = <
394				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
395				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
396				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
397				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
398		};
399
400		I2O: i2o@400100000 {
401			compatible = "ibm,i2o-440spe";
402			reg = <0x00000004 0x00100000 0x100>;
403			dcr-reg = <0x060 0x020>;
404		};
405
406		DMA0: dma0@400100100 {
407			compatible = "ibm,dma-440spe";
408			cell-index = <0>;
409			reg = <0x00000004 0x00100100 0x100>;
410			dcr-reg = <0x060 0x020>;
411			interrupt-parent = <&DMA0>;
412			interrupts = <0 1>;
413			#interrupt-cells = <1>;
414			#address-cells = <0>;
415			#size-cells = <0>;
416			interrupt-map = <
417				0 &UIC0 0x14 4
418				1 &UIC1 0x16 4>;
419		};
420
421		DMA1: dma1@400100200 {
422			compatible = "ibm,dma-440spe";
423			cell-index = <1>;
424			reg = <0x00000004 0x00100200 0x100>;
425			dcr-reg = <0x060 0x020>;
426			interrupt-parent = <&DMA1>;
427			interrupts = <0 1>;
428			#interrupt-cells = <1>;
429			#address-cells = <0>;
430			#size-cells = <0>;
431			interrupt-map = <
432				0 &UIC0 0x16 4
433				1 &UIC1 0x16 4>;
434		};
435
436		xor-accel@400200000 {
437			compatible = "amcc,xor-accelerator";
438			reg = <0x00000004 0x00200000 0x400>;
439			interrupt-parent = <&UIC1>;
440			interrupts = <0x1f 4>;
441		};
442	};
443
444	chosen {
445		linux,stdout-path = "/plb/opb/serial@f0000200";
446	};
447};
448