xref: /openbmc/linux/scripts/dtc/include-prefixes/powerpc/fsl/t1040si-post.dtsi (revision da414bb9)

/*
 * T1040 Silicon/SoC Device Tree Source (post include)
 *
 * Copyright 2013 - 2014 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

&bman_fbpr {
	compatible = "fsl,bman-fbpr";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_fqd {
	compatible = "fsl,qman-fqd";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_pfdr {
	compatible = "fsl,qman-pfdr";
	alloc-ranges = <0 0 0x10000 0>;
};

&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	compatible = "fsl,ifc", "simple-bus";
	interrupts = <25 2 0 0>;
};

&pci0 {
	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <20 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <20 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 40 1 0 0
			0000 0 0 2 &mpic 1 1 0 0
			0000 0 0 3 &mpic 2 1 0 0
			0000 0 0 4 &mpic 3 1 0 0
			>;
	};
};

&pci1 {
	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	interrupts = <21 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <21 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 41 1 0 0
			0000 0 0 2 &mpic 5 1 0 0
			0000 0 0 3 &mpic 6 1 0 0
			0000 0 0 4 &mpic 7 1 0 0
			>;
	};
};

&pci2 {
	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <22 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <22 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 42 1 0 0
			0000 0 0 2 &mpic 9 1 0 0
			0000 0 0 3 &mpic 10 1 0 0
			0000 0 0 4 &mpic 11 1 0 0
			>;
	};
};

&pci3 {
	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <23 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <23 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 43 1 0 0
			0000 0 0 2 &mpic 0 1 0 0
			0000 0 0 3 &mpic 4 1 0 0
			0000 0 0 4 &mpic 8 1 0 0
			>;
	};
};

&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
		interrupts = <52 2 0 0
			      84 2 0 0
			      85 2 0 0>;
		reg = <0x0 0x1000>;
	};
	dcsr-npc {
		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
		reg = <0x1000 0x1000 0x1002000 0x10000>;
	};
	dcsr-nxc@2000 {
		compatible = "fsl,dcsr-nxc";
		reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
		compatible = "fsl,dcsr-corenet";
		reg = <0x8000 0x1000 0x1A000 0x1000>;
	};
	dcsr-dpaa@9000 {
		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
		reg = <0x9000 0x1000>;
	};
	dcsr-ocn@11000 {
		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
		reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
		compatible = "fsl,dcsr-ddr";
		dev-handle = <&ddr1>;
		reg = <0x12000 0x1000>;
	};
	dcsr-nal@18000 {
		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
		reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
		reg = <0x22000 0x1000>;
	};
	dcsr-snpc@30000 {
		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
		reg = <0x30000 0x1000 0x1022000 0x10000>;
	};
	dcsr-snpc@31000 {
		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
		reg = <0x31000 0x1000 0x1042000 0x10000>;
	};
	dcsr-cpu-sb-proxy@100000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu0>;
		reg = <0x100000 0x1000 0x101000 0x1000>;
	};
	dcsr-cpu-sb-proxy@108000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu1>;
		reg = <0x108000 0x1000 0x109000 0x1000>;
	};
	dcsr-cpu-sb-proxy@110000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu2>;
		reg = <0x110000 0x1000 0x111000 0x1000>;
	};
	dcsr-cpu-sb-proxy@118000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu3>;
		reg = <0x118000 0x1000 0x119000 0x1000>;
	};
};

&bportals {
	#address-cells = <0x1>;
	#size-cells = <0x1>;
	compatible = "simple-bus";

	bman-portal@0 {
		compatible = "fsl,bman-portal";
		reg = <0x0 0x4000>, <0x1000000 0x1000>;
		interrupts = <105 2 0 0>;
	};
	bman-portal@4000 {
		compatible = "fsl,bman-portal";
		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
		interrupts = <107 2 0 0>;
	};
	bman-portal@8000 {
		compatible = "fsl,bman-portal";
		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
		interrupts = <109 2 0 0>;
	};
	bman-portal@c000 {
		compatible = "fsl,bman-portal";
		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
		interrupts = <111 2 0 0>;
	};
	bman-portal@10000 {
		compatible = "fsl,bman-portal";
		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
		interrupts = <113 2 0 0>;
	};
	bman-portal@14000 {
		compatible = "fsl,bman-portal";
		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
		interrupts = <115 2 0 0>;
	};
	bman-portal@18000 {
		compatible = "fsl,bman-portal";
		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
		interrupts = <117 2 0 0>;
	};
	bman-portal@1c000 {
		compatible = "fsl,bman-portal";
		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
		interrupts = <119 2 0 0>;
	};
	bman-portal@20000 {
		compatible = "fsl,bman-portal";
		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
		interrupts = <121 2 0 0>;
	};
	bman-portal@24000 {
		compatible = "fsl,bman-portal";
		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
		interrupts = <123 2 0 0>;
	};
};

&qportals {
	#address-cells = <0x1>;
	#size-cells = <0x1>;
	compatible = "simple-bus";

	qportal0: qman-portal@0 {
		compatible = "fsl,qman-portal";
		reg = <0x0 0x4000>, <0x1000000 0x1000>;
		interrupts = <104 0x2 0 0>;
		cell-index = <0x0>;
	};
	qportal1: qman-portal@4000 {
		compatible = "fsl,qman-portal";
		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
		interrupts = <106 0x2 0 0>;
		cell-index = <0x1>;
	};
	qportal2: qman-portal@8000 {
		compatible = "fsl,qman-portal";
		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
		interrupts = <108 0x2 0 0>;
		cell-index = <0x2>;
	};
	qportal3: qman-portal@c000 {
		compatible = "fsl,qman-portal";
		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
		interrupts = <110 0x2 0 0>;
		cell-index = <0x3>;
	};
	qportal4: qman-portal@10000 {
		compatible = "fsl,qman-portal";
		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
		interrupts = <112 0x2 0 0>;
		cell-index = <0x4>;
	};
	qportal5: qman-portal@14000 {
		compatible = "fsl,qman-portal";
		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
		interrupts = <114 0x2 0 0>;
		cell-index = <0x5>;
	};
	qportal6: qman-portal@18000 {
		compatible = "fsl,qman-portal";
		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
		interrupts = <116 0x2 0 0>;
		cell-index = <0x6>;
	};
	qportal7: qman-portal@1c000 {
		compatible = "fsl,qman-portal";
		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
		interrupts = <118 0x2 0 0>;
		cell-index = <0x7>;
	};
	qportal8: qman-portal@20000 {
		compatible = "fsl,qman-portal";
		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
		interrupts = <120 0x2 0 0>;
		cell-index = <0x8>;
	};
	qportal9: qman-portal@24000 {
		compatible = "fsl,qman-portal";
		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
		interrupts = <122 0x2 0 0>;
		cell-index = <0x9>;
	};
};

&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
		compatible = "fsl,soc-sram-error";
		interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
		compatible = "fsl,corenet-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <16>;
	};

	ddr1: memory-controller@8000 {
		compatible = "fsl,qoriq-memory-controller-v5.0",
				"fsl,qoriq-memory-controller";
		reg = <0x8000 0x1000>;
		interrupts = <16 2 1 23>;
	};

	cpc: l3-cache-controller@10000 {
		compatible = "fsl,t1040-l3-cache-controller", "cache";
		reg = <0x10000 0x1000>;
		interrupts = <16 2 1 27>;
	};

	corenet-cf@18000 {
		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
		reg = <0x18000 0x1000>;
		interrupts = <16 2 1 31>;
		fsl,ccf-num-csdids = <32>;
		fsl,ccf-num-snoopids = <32>;
	};

	iommu@20000 {
		compatible = "fsl,pamu-v1.0", "fsl,pamu";
		reg = <0x20000 0x1000>;
		ranges = <0 0x20000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;
		interrupts = <
			24 2 0 0
			16 2 1 30>;
		pamu0: pamu@0 {
			reg = <0 0x1000>;
			fsl,primary-cache-geometry = <128 1>;
			fsl,secondary-cache-geometry = <16 2>;
		};
	};

/include/ "qoriq-mpic.dtsi"

	guts: global-utilities@e0000 {
		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
		reg = <0xe0000 0xe00>;
		fsl,has-rstcr;
		fsl,liodn-bits = <12>;
	};

/include/ "qoriq-clockgen2.dtsi"
	global-utilities@e1000 {
		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";

		mux0: mux0@0 {
			#clock-cells = <0>;
			reg = <0x0 4>;
			compatible = "fsl,qoriq-core-mux-2.0";
			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
			clock-names = "pll0", "pll0-div2", "pll1-div4",
				"pll1", "pll1-div2", "pll1-div4";
			clock-output-names = "cmux0";
		};

		mux1: mux1@20 {
			#clock-cells = <0>;
			reg = <0x20 4>;
			compatible = "fsl,qoriq-core-mux-2.0";
			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
			clock-names = "pll0", "pll0-div2", "pll1-div4",
				"pll1", "pll1-div2", "pll1-div4";
			clock-output-names = "cmux1";
		};

		mux2: mux2@40 {
			#clock-cells = <0>;
			reg = <0x40 4>;
			compatible = "fsl,qoriq-core-mux-2.0";
			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
			clock-names = "pll0", "pll0-div2", "pll1-div4",
				"pll1", "pll1-div2", "pll1-div4";
			clock-output-names = "cmux2";
		};

		mux3: mux3@60 {
			#clock-cells = <0>;
			reg = <0x60 4>;
			compatible = "fsl,qoriq-core-mux-2.0";
			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
			clock-names = "pll0_0", "pll0_1", "pll0_2",
				"pll1_0", "pll1_1", "pll1_2";
			clock-output-names = "cmux3";
		};
	};

	rcpm: global-utilities@e2000 {
		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
		reg = <0xe2000 0x1000>;
	};

	sfp: sfp@e8000 {
		compatible = "fsl,t1040-sfp";
		reg	   = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
		compatible = "fsl,t1040-serdes";
		reg	   = <0xea000 0x4000>;
	};

	scfg: global-utilities@fc000 {
		compatible = "fsl,t1040-scfg";
		reg = <0xfc000 0x1000>;
	};

/include/ "elo3-dma-0.dtsi"
/include/ "elo3-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
		fsl,espi-num-chipselects = <4>;
	};

/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
		sdhci,auto-cmd12;
	};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-gpio-1.dtsi"
/include/ "qoriq-gpio-2.dtsi"
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
		usb0: usb@210000 {
			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
			fsl,iommu-parent = <&pamu0>;
			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
			phy_type = "utmi";
			port0;
		};
/include/ "qoriq-usb2-dr-0.dtsi"
		usb1: usb@211000 {
			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
			fsl,iommu-parent = <&pamu0>;
			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
			dr_mode = "host";
			phy_type = "utmi";
		};

	display@180000 {
		compatible = "fsl,t1040-diu", "fsl,diu";
		reg = <0x180000 1000>;
		interrupts = <74 2 0 0>;
	};

/include/ "qoriq-sata2-0.dtsi"
	sata@220000 {
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
	};
/include/ "qoriq-sata2-1.dtsi"
	sata@221000 {
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
	};
/include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"

/include/ "qoriq-fman3l-0.dtsi"
/include/ "qoriq-fman3-0-1g-0.dtsi"
/include/ "qoriq-fman3-0-1g-1.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-4.dtsi"
	fman@400000 {
		enet0: ethernet@e0000 {
		};

		enet1: ethernet@e2000 {
		};

		enet2: ethernet@e4000 {
		};

		enet3: ethernet@e6000 {
		};

		enet4: ethernet@e8000 {
		};

		mdio@fc000 {
			interrupts = <100 1 0 0>;
		};

		mdio@fd000 {
			status = "disabled";
		};
	};
};