1/*
2 * T1040RDB Device Tree Source
3 *
4 * Copyright 2014 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "t104xsi-pre.dtsi"
36/include/ "t104xrdb.dtsi"
37
38/ {
39	model = "fsl,T1040RDB";
40	compatible = "fsl,T1040RDB";
41
42	aliases {
43		phy_sgmii_2 = &phy_sgmii_2;
44	};
45
46	soc@ffe000000 {
47		fman@400000 {
48			ethernet@e0000 {
49				fixed-link = <0 1 1000 0 0>;
50				phy-connection-type = "sgmii";
51			};
52
53			ethernet@e2000 {
54				fixed-link = <1 1 1000 0 0>;
55				phy-connection-type = "sgmii";
56			};
57
58			ethernet@e4000 {
59				phy-handle = <&phy_sgmii_2>;
60				phy-connection-type = "sgmii";
61			};
62
63			mdio@fc000 {
64				phy_sgmii_2: ethernet-phy@3 {
65					reg = <0x03>;
66				};
67
68				/* VSC8514 QSGMII PHY */
69				phy_qsgmii_0: ethernet-phy@4 {
70					reg = <0x4>;
71				};
72
73				phy_qsgmii_1: ethernet-phy@5 {
74					reg = <0x5>;
75				};
76
77				phy_qsgmii_2: ethernet-phy@6 {
78					reg = <0x6>;
79				};
80
81				phy_qsgmii_3: ethernet-phy@7 {
82					reg = <0x7>;
83				};
84
85				/* VSC8514 QSGMII PHY */
86				phy_qsgmii_4: ethernet-phy@8 {
87					reg = <0x8>;
88				};
89
90				phy_qsgmii_5: ethernet-phy@9 {
91					reg = <0x9>;
92				};
93
94				phy_qsgmii_6: ethernet-phy@a {
95					reg = <0xa>;
96				};
97
98				phy_qsgmii_7: ethernet-phy@b {
99					reg = <0xb>;
100				};
101			};
102		};
103	};
104
105	ifc: localbus@ffe124000 {
106		cpld@3,0 {
107			compatible = "fsl,t1040rdb-cpld";
108		};
109	};
110};
111
112#include "t1040si-post.dtsi"
113
114&seville_switch {
115	status = "okay";
116};
117
118&seville_port0 {
119	managed = "in-band-status";
120	phy-handle = <&phy_qsgmii_0>;
121	phy-mode = "qsgmii";
122	label = "ETH3";
123	status = "okay";
124};
125
126&seville_port1 {
127	managed = "in-band-status";
128	phy-handle = <&phy_qsgmii_1>;
129	phy-mode = "qsgmii";
130	label = "ETH4";
131	status = "okay";
132};
133
134&seville_port2 {
135	managed = "in-band-status";
136	phy-handle = <&phy_qsgmii_2>;
137	phy-mode = "qsgmii";
138	label = "ETH5";
139	status = "okay";
140};
141
142&seville_port3 {
143	managed = "in-band-status";
144	phy-handle = <&phy_qsgmii_3>;
145	phy-mode = "qsgmii";
146	label = "ETH6";
147	status = "okay";
148};
149
150&seville_port4 {
151	managed = "in-band-status";
152	phy-handle = <&phy_qsgmii_4>;
153	phy-mode = "qsgmii";
154	label = "ETH7";
155	status = "okay";
156};
157
158&seville_port5 {
159	managed = "in-band-status";
160	phy-handle = <&phy_qsgmii_5>;
161	phy-mode = "qsgmii";
162	label = "ETH8";
163	status = "okay";
164};
165
166&seville_port6 {
167	managed = "in-band-status";
168	phy-handle = <&phy_qsgmii_6>;
169	phy-mode = "qsgmii";
170	label = "ETH9";
171	status = "okay";
172};
173
174&seville_port7 {
175	managed = "in-band-status";
176	phy-handle = <&phy_qsgmii_7>;
177	phy-mode = "qsgmii";
178	label = "ETH10";
179	status = "okay";
180};
181
182&seville_port8 {
183	ethernet = <&enet0>;
184	status = "okay";
185};
186