1/*
2 * T1024 RDB Device Tree Source
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "t102xsi-pre.dtsi"
36
37/ {
38	model = "fsl,T1024RDB";
39	compatible = "fsl,T1024RDB";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	ifc: localbus@ffe124000 {
45		reg = <0xf 0xfe124000 0 0x2000>;
46		ranges = <0 0 0xf 0xe8000000 0x08000000
47			  2 0 0xf 0xff800000 0x00010000
48			  3 0 0xf 0xffdf0000 0x00008000>;
49
50		nor@0,0 {
51			#address-cells = <1>;
52			#size-cells = <1>;
53			compatible = "cfi-flash";
54			reg = <0x0 0x0 0x8000000>;
55			bank-width = <2>;
56			device-width = <1>;
57		};
58
59		nand@1,0 {
60			#address-cells = <1>;
61			#size-cells = <1>;
62			compatible = "fsl,ifc-nand";
63			reg = <0x2 0x0 0x10000>;
64		};
65
66		board-control@2,0 {
67			#address-cells = <1>;
68			#size-cells = <1>;
69			compatible = "fsl,t1024-cpld";
70			reg = <3 0 0x300>;
71			ranges = <0 3 0 0x300>;
72			bank-width = <1>;
73			device-width = <1>;
74		};
75	};
76
77	memory {
78		device_type = "memory";
79	};
80
81	dcsr: dcsr@f00000000 {
82		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
83	};
84
85	soc: soc@ffe000000 {
86		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
87		reg = <0xf 0xfe000000 0 0x00001000>;
88		spi@110000 {
89			flash@0 {
90				#address-cells = <1>;
91				#size-cells = <1>;
92				compatible = "micron,n25q512ax3";
93				reg = <0>;
94				spi-max-frequency = <10000000>; /* input clk */
95			};
96
97			slic@1 {
98				compatible = "maxim,ds26522";
99				reg = <1>;
100				spi-max-frequency = <2000000>;
101			};
102
103			slic@2 {
104				compatible = "maxim,ds26522";
105				reg = <2>;
106				spi-max-frequency = <2000000>;
107			};
108		};
109
110		i2c@118000 {
111			adt7461@4c {
112				/* Thermal Monitor */
113				compatible = "adi,adt7461";
114				reg = <0x4c>;
115			};
116
117			current-sensor@40 {
118				compatible = "ti,ina220";
119				reg = <0x40>;
120				shunt-resistor = <1000>;
121			};
122
123			eeprom@50 {
124				compatible = "atmel,24c256";
125				reg = <0x50>;
126			};
127
128			rtc@68 {
129				compatible = "dallas,ds1339";
130				reg = <0x68>;
131				interrupts = <0x1 0x1 0 0>;
132			};
133		};
134
135		i2c@118100 {
136			pca9546@77 {
137				compatible = "nxp,pca9546";
138				reg = <0x77>;
139				#address-cells = <1>;
140				#size-cells = <0>;
141			};
142		};
143	};
144
145	pci0: pcie@ffe240000 {
146		reg = <0xf 0xfe240000 0 0x10000>;
147		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
148			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
149		pcie@0 {
150			ranges = <0x02000000 0 0xe0000000
151				  0x02000000 0 0xe0000000
152				  0 0x10000000
153
154				  0x01000000 0 0x00000000
155				  0x01000000 0 0x00000000
156				  0 0x00010000>;
157		};
158	};
159
160	pci1: pcie@ffe250000 {
161		reg = <0xf 0xfe250000 0 0x10000>;
162		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
163			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
164		pcie@0 {
165			ranges = <0x02000000 0 0xe0000000
166				  0x02000000 0 0xe0000000
167				  0 0x10000000
168
169				  0x01000000 0 0x00000000
170				  0x01000000 0 0x00000000
171				  0 0x00010000>;
172		};
173	};
174
175	pci2: pcie@ffe260000 {
176		reg = <0xf 0xfe260000 0 0x10000>;
177		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
178			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
179		pcie@0 {
180			ranges = <0x02000000 0 0xe0000000
181				  0x02000000 0 0xe0000000
182				  0 0x10000000
183
184				  0x01000000 0 0x00000000
185				  0x01000000 0 0x00000000
186				  0 0x00010000>;
187		};
188	};
189};
190
191#include "t1024si-post.dtsi"
192