1/*
2 * T1023 RDB Device Tree Source
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "t102xsi-pre.dtsi"
36
37/ {
38	model = "fsl,T1023RDB";
39	compatible = "fsl,T1023RDB";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	ifc: localbus@ffe124000 {
45		reg = <0xf 0xfe124000 0 0x2000>;
46		ranges = <0 0 0xf 0xe8000000 0x08000000
47			  1 0 0xf 0xff800000 0x00010000>;
48
49		nor@0,0 {
50			#address-cells = <1>;
51			#size-cells = <1>;
52			status = "disabled";
53			compatible = "cfi-flash";
54			reg = <0x0 0x0 0x8000000>;
55			bank-width = <2>;
56			device-width = <1>;
57		};
58
59		nand@1,0 {
60			#address-cells = <1>;
61			#size-cells = <1>;
62			compatible = "fsl,ifc-nand";
63			reg = <0x1 0x0 0x10000>;
64		};
65	};
66
67	memory {
68		device_type = "memory";
69	};
70
71	dcsr: dcsr@f00000000 {
72		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
73	};
74
75	soc: soc@ffe000000 {
76		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
77		reg = <0xf 0xfe000000 0 0x00001000>;
78		spi@110000 {
79			flash@0 {
80				#address-cells = <1>;
81				#size-cells = <1>;
82				compatible = "spansion,s25fl512s";
83				reg = <0>;
84				spi-max-frequency = <10000000>; /* input clk */
85			};
86		};
87
88		i2c@118000 {
89			eeprom@50 {
90				compatible = "st,m24256";
91				reg = <0x50>;
92			};
93
94			rtc@68 {
95				compatible = "dallas,ds1339";
96				reg = <0x68>;
97				interrupts = <0x5 0x1 0 0>;
98			};
99		};
100
101		i2c@118100 {
102			current-sensor@40 {
103				compatible = "ti,ina220";
104				reg = <0x40>;
105				shunt-resistor = <1000>;
106			};
107
108			current-sensor@41 {
109				compatible = "ti,ina220";
110				reg = <0x41>;
111				shunt-resistor = <1000>;
112			};
113		};
114	};
115
116	pci0: pcie@ffe240000 {
117		reg = <0xf 0xfe240000 0 0x10000>;
118		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
119			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
120		pcie@0 {
121			ranges = <0x02000000 0 0xe0000000
122				  0x02000000 0 0xe0000000
123				  0 0x10000000
124
125				  0x01000000 0 0x00000000
126				  0x01000000 0 0x00000000
127				  0 0x00010000>;
128		};
129	};
130
131	pci1: pcie@ffe250000 {
132		reg = <0xf 0xfe250000 0 0x10000>;
133		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
134			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
135		pcie@0 {
136			ranges = <0x02000000 0 0xe0000000
137				  0x02000000 0 0xe0000000
138				  0 0x10000000
139
140				  0x01000000 0 0x00000000
141				  0x01000000 0 0x00000000
142				  0 0x00010000>;
143		};
144	};
145
146	pci2: pcie@ffe260000 {
147		reg = <0xf 0xfe260000 0 0x10000>;
148		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
149			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
150		pcie@0 {
151			ranges = <0x02000000 0 0xe0000000
152				  0x02000000 0 0xe0000000
153				  0 0x10000000
154
155				  0x01000000 0 0x00000000
156				  0x01000000 0 0x00000000
157				  0 0x00010000>;
158		};
159	};
160};
161
162/include/ "t1023si-post.dtsi"
163