xref: /openbmc/linux/scripts/dtc/include-prefixes/powerpc/fsl/qoriq-fman3l-0.dtsi (revision a16b5da5)

/*
 * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
 *
 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

fman0: fman@400000 {
	#address-cells = <1>;
	#size-cells = <1>;
	cell-index = <0>;
	compatible = "fsl,fman";
	ranges = <0 0x400000 0xfe000>;
	reg = <0x400000 0xfe000>;
	interrupts = <96 2 0 0>, <16 2 1 1>;
	clocks = <&clockgen 3 0>;
	clock-names = "fmanclk";
	fsl,qman-channel-range = <0x800 0x10>;
	ptimer-handle = <&ptp_timer0>;

	muram@0 {
		compatible = "fsl,fman-muram";
		reg = <0x0 0x30000>;
	};

	fman0_oh_0x2: port@82000 {
		cell-index = <0x2>;
		compatible = "fsl,fman-v3-port-oh";
		reg = <0x82000 0x1000>;
	};

	fman0_oh_0x3: port@83000 {
		cell-index = <0x3>;
		compatible = "fsl,fman-v3-port-oh";
		reg = <0x83000 0x1000>;
	};

	fman0_oh_0x4: port@84000 {
		cell-index = <0x4>;
		compatible = "fsl,fman-v3-port-oh";
		reg = <0x84000 0x1000>;
	};

	fman0_oh_0x5: port@85000 {
		cell-index = <0x5>;
		compatible = "fsl,fman-v3-port-oh";
		reg = <0x85000 0x1000>;
	};

	mdio0: mdio@fc000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
		reg = <0xfc000 0x1000>;
	};

	xmdio0: mdio@fd000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
		reg = <0xfd000 0x1000>;
	};
};

ptp_timer0: ptp-timer@4fe000 {
	compatible = "fsl,fman-ptp-timer";
	reg = <0x4fe000 0x1000>;
	interrupts = <96 2 0 0>;
	clocks = <&clockgen 3 0>;
};