1/* 2 * P1021/P1012 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011-2012 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&lbc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; 39 interrupts = <19 2 0 0>; 40}; 41 42/* controller at 0x9000 */ 43&pci0 { 44 compatible = "fsl,mpc8548-pcie"; 45 device_type = "pci"; 46 #size-cells = <2>; 47 #address-cells = <3>; 48 bus-range = <0 255>; 49 clock-frequency = <33333333>; 50 interrupts = <16 2 0 0>; 51 52 pcie@0 { 53 reg = <0 0 0 0 0>; 54 #interrupt-cells = <1>; 55 #size-cells = <2>; 56 #address-cells = <3>; 57 device_type = "pci"; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 60 interrupt-map = < 61 /* IDSEL 0x0 */ 62 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 63 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 64 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 65 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 66 >; 67 }; 68}; 69 70/* controller at 0xa000 */ 71&pci1 { 72 compatible = "fsl,mpc8548-pcie"; 73 device_type = "pci"; 74 #size-cells = <2>; 75 #address-cells = <3>; 76 bus-range = <0 255>; 77 clock-frequency = <33333333>; 78 interrupts = <16 2 0 0>; 79 80 pcie@0 { 81 reg = <0 0 0 0 0>; 82 #interrupt-cells = <1>; 83 #size-cells = <2>; 84 #address-cells = <3>; 85 device_type = "pci"; 86 interrupts = <16 2 0 0>; 87 interrupt-map-mask = <0xf800 0 0 7>; 88 89 interrupt-map = < 90 /* IDSEL 0x0 */ 91 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 92 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 93 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 94 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 95 >; 96 }; 97}; 98 99&soc { 100 #address-cells = <1>; 101 #size-cells = <1>; 102 device_type = "soc"; 103 compatible = "fsl,p1021-immr", "simple-bus"; 104 bus-frequency = <0>; // Filled out by uboot. 105 106 ecm-law@0 { 107 compatible = "fsl,ecm-law"; 108 reg = <0x0 0x1000>; 109 fsl,num-laws = <12>; 110 }; 111 112 ecm@1000 { 113 compatible = "fsl,p1021-ecm", "fsl,ecm"; 114 reg = <0x1000 0x1000>; 115 interrupts = <16 2 0 0>; 116 }; 117 118 memory-controller@2000 { 119 compatible = "fsl,p1021-memory-controller"; 120 reg = <0x2000 0x1000>; 121 interrupts = <16 2 0 0>; 122 }; 123 124/include/ "pq3-i2c-0.dtsi" 125/include/ "pq3-i2c-1.dtsi" 126/include/ "pq3-duart-0.dtsi" 127 128/include/ "pq3-espi-0.dtsi" 129 spi@7000 { 130 fsl,espi-num-chipselects = <4>; 131 }; 132 133/include/ "pq3-gpio-0.dtsi" 134 135 L2: l2-cache-controller@20000 { 136 compatible = "fsl,p1021-l2-cache-controller"; 137 reg = <0x20000 0x1000>; 138 cache-line-size = <32>; // 32 bytes 139 cache-size = <0x40000>; // L2,256K 140 interrupts = <16 2 0 0>; 141 }; 142 143/include/ "pq3-dma-0.dtsi" 144/include/ "pq3-usb2-dr-0.dtsi" 145 usb@22000 { 146 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; 147 }; 148 149/include/ "pq3-esdhc-0.dtsi" 150 sdhc@2e000 { 151 sdhci,auto-cmd12; 152 }; 153 154/include/ "pq3-sec3.3-0.dtsi" 155 156/include/ "pq3-mpic.dtsi" 157/include/ "pq3-mpic-timer-B.dtsi" 158 159/include/ "pq3-etsec2-0.dtsi" 160 enet0: enet0_grp2: ethernet@b0000 { 161 }; 162 163/include/ "pq3-etsec2-1.dtsi" 164 enet1: enet1_grp2: ethernet@b1000 { 165 }; 166 167/include/ "pq3-etsec2-2.dtsi" 168 enet2: enet2_grp2: ethernet@b2000 { 169 }; 170 171 global-utilities@e0000 { 172 compatible = "fsl,p1021-guts"; 173 reg = <0xe0000 0x1000>; 174 fsl,has-rstcr; 175 }; 176}; 177 178&qe { 179 #address-cells = <1>; 180 #size-cells = <1>; 181 device_type = "qe"; 182 compatible = "fsl,qe"; 183 fsl,qe-num-riscs = <1>; 184 fsl,qe-num-snums = <28>; 185 186 qeic: interrupt-controller@80 { 187 interrupt-controller; 188 compatible = "fsl,qe-ic"; 189 #address-cells = <0>; 190 #interrupt-cells = <1>; 191 reg = <0x80 0x80>; 192 interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44 193 }; 194 195 ucc@2000 { 196 cell-index = <1>; 197 reg = <0x2000 0x200>; 198 interrupts = <32>; 199 interrupt-parent = <&qeic>; 200 }; 201 202 mdio@2120 { 203 #address-cells = <1>; 204 #size-cells = <0>; 205 reg = <0x2120 0x18>; 206 compatible = "fsl,ucc-mdio"; 207 }; 208 209 ucc@2400 { 210 cell-index = <5>; 211 reg = <0x2400 0x200>; 212 interrupts = <40>; 213 interrupt-parent = <&qeic>; 214 }; 215 216 ucc@2600 { 217 cell-index = <7>; 218 reg = <0x2600 0x200>; 219 interrupts = <42>; 220 interrupt-parent = <&qeic>; 221 }; 222 223 ucc@2200 { 224 cell-index = <3>; 225 reg = <0x2200 0x200>; 226 interrupts = <34>; 227 interrupt-parent = <&qeic>; 228 }; 229 230 muram@10000 { 231 #address-cells = <1>; 232 #size-cells = <1>; 233 compatible = "fsl,qe-muram", "fsl,cpm-muram"; 234 ranges = <0x0 0x10000 0x6000>; 235 236 data-only@0 { 237 compatible = "fsl,qe-muram-data", 238 "fsl,cpm-muram-data"; 239 reg = <0x0 0x6000>; 240 }; 241 }; 242}; 243 244/include/ "pq3-etsec2-grp2-0.dtsi" 245/include/ "pq3-etsec2-grp2-1.dtsi" 246/include/ "pq3-etsec2-grp2-2.dtsi" 247