1/*
2 * P1020/P1011 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
39	interrupts = <19 2 0 0>;
40};
41
42/* controller at 0x9000 */
43&pci0 {
44	compatible = "fsl,mpc8548-pcie";
45	device_type = "pci";
46	#size-cells = <2>;
47	#address-cells = <3>;
48	bus-range = <0 255>;
49	clock-frequency = <33333333>;
50	interrupts = <16 2 0 0>;
51
52	pcie@0 {
53		reg = <0 0 0 0 0>;
54		#interrupt-cells = <1>;
55		#size-cells = <2>;
56		#address-cells = <3>;
57		device_type = "pci";
58		interrupts = <16 2 0 0>;
59		interrupt-map-mask = <0xf800 0 0 7>;
60		interrupt-map = <
61			/* IDSEL 0x0 */
62			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
63			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
64			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
65			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
66			>;
67	};
68};
69
70/* controller at 0xa000 */
71&pci1 {
72	compatible = "fsl,mpc8548-pcie";
73	device_type = "pci";
74	#size-cells = <2>;
75	#address-cells = <3>;
76	bus-range = <0 255>;
77	clock-frequency = <33333333>;
78	interrupts = <16 2 0 0>;
79
80	pcie@0 {
81		reg = <0 0 0 0 0>;
82		#interrupt-cells = <1>;
83		#size-cells = <2>;
84		#address-cells = <3>;
85		device_type = "pci";
86		interrupts = <16 2 0 0>;
87		interrupt-map-mask = <0xf800 0 0 7>;
88
89		interrupt-map = <
90			/* IDSEL 0x0 */
91			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
92			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
93			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
94			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
95			>;
96	};
97};
98
99&soc {
100	#address-cells = <1>;
101	#size-cells = <1>;
102	device_type = "soc";
103	compatible = "fsl,p1020-immr", "simple-bus";
104	bus-frequency = <0>;		// Filled out by uboot.
105
106	ecm-law@0 {
107		compatible = "fsl,ecm-law";
108		reg = <0x0 0x1000>;
109		fsl,num-laws = <12>;
110	};
111
112	ecm@1000 {
113		compatible = "fsl,p1020-ecm", "fsl,ecm";
114		reg = <0x1000 0x1000>;
115		interrupts = <16 2 0 0>;
116	};
117
118	memory-controller@2000 {
119		compatible = "fsl,p1020-memory-controller";
120		reg = <0x2000 0x1000>;
121		interrupts = <16 2 0 0>;
122	};
123
124/include/ "pq3-i2c-0.dtsi"
125/include/ "pq3-i2c-1.dtsi"
126/include/ "pq3-duart-0.dtsi"
127
128/include/ "pq3-espi-0.dtsi"
129	spi@7000 {
130		fsl,espi-num-chipselects = <4>;
131	};
132
133/include/ "pq3-gpio-0.dtsi"
134
135	L2: l2-cache-controller@20000 {
136		compatible = "fsl,p1020-l2-cache-controller";
137		reg = <0x20000 0x1000>;
138		cache-line-size = <32>;	// 32 bytes
139		cache-size = <0x40000>; // L2,256K
140		interrupts = <16 2 0 0>;
141	};
142
143/include/ "pq3-dma-0.dtsi"
144/include/ "pq3-usb2-dr-0.dtsi"
145/include/ "pq3-usb2-dr-1.dtsi"
146
147/include/ "pq3-esdhc-0.dtsi"
148	sdhc@2e000 {
149		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
150		sdhci,auto-cmd12;
151	};
152/include/ "pq3-sec3.3-0.dtsi"
153
154/include/ "pq3-mpic.dtsi"
155/include/ "pq3-mpic-timer-B.dtsi"
156
157/include/ "pq3-etsec2-0.dtsi"
158	enet0: enet0_grp2: ethernet@b0000 {
159	};
160
161/include/ "pq3-etsec2-1.dtsi"
162	enet1: enet1_grp2: ethernet@b1000 {
163	};
164
165/include/ "pq3-etsec2-2.dtsi"
166	enet2: enet2_grp2: ethernet@b2000 {
167	};
168
169	global-utilities@e0000 {
170		compatible = "fsl,p1020-guts";
171		reg = <0xe0000 0x1000>;
172		fsl,has-rstcr;
173	};
174};
175
176/include/ "pq3-etsec2-grp2-0.dtsi"
177/include/ "pq3-etsec2-grp2-1.dtsi"
178/include/ "pq3-etsec2-grp2-2.dtsi"
179