1/* 2 * CM5200 board Device Tree Source 3 * 4 * Copyright (C) 2007 Semihalf 5 * Marian Balakowicz <m8@semihalf.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13/dts-v1/; 14 15/ { 16 model = "schindler,cm5200"; 17 compatible = "schindler,cm5200"; 18 #address-cells = <1>; 19 #size-cells = <1>; 20 interrupt-parent = <&mpc5200_pic>; 21 22 cpus { 23 #address-cells = <1>; 24 #size-cells = <0>; 25 26 PowerPC,5200@0 { 27 device_type = "cpu"; 28 reg = <0>; 29 d-cache-line-size = <32>; 30 i-cache-line-size = <32>; 31 d-cache-size = <0x4000>; // L1, 16K 32 i-cache-size = <0x4000>; // L1, 16K 33 timebase-frequency = <0>; // from bootloader 34 bus-frequency = <0>; // from bootloader 35 clock-frequency = <0>; // from bootloader 36 }; 37 }; 38 39 memory { 40 device_type = "memory"; 41 reg = <0x00000000 0x04000000>; // 64MB 42 }; 43 44 soc5200@f0000000 { 45 #address-cells = <1>; 46 #size-cells = <1>; 47 compatible = "fsl,mpc5200b-immr"; 48 ranges = <0 0xf0000000 0x0000c000>; 49 reg = <0xf0000000 0x00000100>; 50 bus-frequency = <0>; // from bootloader 51 system-frequency = <0>; // from bootloader 52 53 cdm@200 { 54 compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; 55 reg = <0x200 0x38>; 56 }; 57 58 mpc5200_pic: interrupt-controller@500 { 59 // 5200 interrupts are encoded into two levels; 60 interrupt-controller; 61 #interrupt-cells = <3>; 62 compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; 63 reg = <0x500 0x80>; 64 }; 65 66 timer@600 { // General Purpose Timer 67 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 68 reg = <0x600 0x10>; 69 interrupts = <1 9 0>; 70 fsl,has-wdt; 71 }; 72 73 timer@610 { // General Purpose Timer 74 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 75 reg = <0x610 0x10>; 76 interrupts = <1 10 0>; 77 }; 78 79 timer@620 { // General Purpose Timer 80 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 81 reg = <0x620 0x10>; 82 interrupts = <1 11 0>; 83 }; 84 85 timer@630 { // General Purpose Timer 86 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 87 reg = <0x630 0x10>; 88 interrupts = <1 12 0>; 89 }; 90 91 timer@640 { // General Purpose Timer 92 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 93 reg = <0x640 0x10>; 94 interrupts = <1 13 0>; 95 }; 96 97 timer@650 { // General Purpose Timer 98 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 99 reg = <0x650 0x10>; 100 interrupts = <1 14 0>; 101 }; 102 103 timer@660 { // General Purpose Timer 104 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 105 reg = <0x660 0x10>; 106 interrupts = <1 15 0>; 107 }; 108 109 timer@670 { // General Purpose Timer 110 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; 111 reg = <0x670 0x10>; 112 interrupts = <1 16 0>; 113 }; 114 115 rtc@800 { // Real time clock 116 compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; 117 reg = <0x800 0x100>; 118 interrupts = <1 5 0 1 6 0>; 119 }; 120 121 gpio_simple: gpio@b00 { 122 compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; 123 reg = <0xb00 0x40>; 124 interrupts = <1 7 0>; 125 gpio-controller; 126 #gpio-cells = <2>; 127 }; 128 129 gpio_wkup: gpio@c00 { 130 compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; 131 reg = <0xc00 0x40>; 132 interrupts = <1 8 0 0 3 0>; 133 gpio-controller; 134 #gpio-cells = <2>; 135 }; 136 137 spi@f00 { 138 compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; 139 reg = <0xf00 0x20>; 140 interrupts = <2 13 0 2 14 0>; 141 }; 142 143 usb@1000 { 144 compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; 145 reg = <0x1000 0xff>; 146 interrupts = <2 6 0>; 147 }; 148 149 dma-controller@1200 { 150 compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; 151 reg = <0x1200 0x80>; 152 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 153 3 4 0 3 5 0 3 6 0 3 7 0 154 3 8 0 3 9 0 3 10 0 3 11 0 155 3 12 0 3 13 0 3 14 0 3 15 0>; 156 }; 157 158 xlb@1f00 { 159 compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; 160 reg = <0x1f00 0x100>; 161 }; 162 163 psc@2000 { // PSC1 164 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 165 reg = <0x2000 0x100>; 166 interrupts = <2 1 0>; 167 }; 168 169 psc@2200 { // PSC2 170 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 171 reg = <0x2200 0x100>; 172 interrupts = <2 2 0>; 173 }; 174 175 psc@2400 { // PSC3 176 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 177 reg = <0x2400 0x100>; 178 interrupts = <2 3 0>; 179 }; 180 181 psc@2c00 { // PSC6 182 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 183 reg = <0x2c00 0x100>; 184 interrupts = <2 4 0>; 185 }; 186 187 ethernet@3000 { 188 compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; 189 reg = <0x3000 0x400>; 190 local-mac-address = [ 00 00 00 00 00 00 ]; 191 interrupts = <2 5 0>; 192 phy-handle = <&phy0>; 193 }; 194 195 mdio@3000 { 196 #address-cells = <1>; 197 #size-cells = <0>; 198 compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; 199 reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts 200 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. 201 202 phy0: ethernet-phy@0 { 203 reg = <0>; 204 }; 205 }; 206 207 i2c@3d40 { 208 #address-cells = <1>; 209 #size-cells = <0>; 210 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; 211 reg = <0x3d40 0x40>; 212 interrupts = <2 16 0>; 213 }; 214 215 sram@8000 { 216 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; 217 reg = <0x8000 0x4000>; 218 }; 219 }; 220 221 localbus { 222 compatible = "fsl,mpc5200b-lpb","simple-bus"; 223 #address-cells = <2>; 224 #size-cells = <1>; 225 ranges = <0 0 0xfc000000 0x2000000>; 226 227 // 16-bit flash device at LocalPlus Bus CS0 228 flash@0,0 { 229 compatible = "cfi-flash"; 230 reg = <0 0 0x2000000>; 231 bank-width = <2>; 232 device-width = <2>; 233 }; 234 }; 235}; 236