1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (c) Siemens AG, 2018-2021 4 * 5 * Authors: 6 * Le Jin <le.jin@siemens.com> 7 * Jan Kiszka <jan.kiszka@siemens.com> 8 * 9 * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 10 */ 11 12#include "k3-am654.dtsi" 13#include <dt-bindings/phy/phy.h> 14 15/ { 16 aliases { 17 spi0 = &mcu_spi0; 18 mmc0 = &sdhci1; 19 mmc1 = &sdhci0; 20 }; 21 22 chosen { 23 stdout-path = "serial3:115200n8"; 24 bootargs = "earlycon=ns16550a,mmio32,0x02810000"; 25 }; 26 27 reserved-memory { 28 #address-cells = <2>; 29 #size-cells = <2>; 30 ranges; 31 32 secure_ddr: secure-ddr@9e800000 { 33 reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ 34 alignment = <0x1000>; 35 no-map; 36 }; 37 38 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 39 compatible = "shared-dma-pool"; 40 reg = <0 0xa0000000 0 0x100000>; 41 no-map; 42 }; 43 44 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { 45 compatible = "shared-dma-pool"; 46 reg = <0 0xa0100000 0 0xf00000>; 47 no-map; 48 }; 49 50 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 51 compatible = "shared-dma-pool"; 52 reg = <0 0xa1000000 0 0x100000>; 53 no-map; 54 }; 55 56 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { 57 compatible = "shared-dma-pool"; 58 reg = <0 0xa1100000 0 0xf00000>; 59 no-map; 60 }; 61 62 rtos_ipc_memory_region: ipc-memories@a2000000 { 63 reg = <0x00 0xa2000000 0x00 0x00200000>; 64 alignment = <0x1000>; 65 no-map; 66 }; 67 }; 68 69 leds { 70 compatible = "gpio-leds"; 71 pinctrl-names = "default"; 72 pinctrl-0 = <&leds_pins_default>; 73 74 status-led-red { 75 gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; 76 panic-indicator; 77 }; 78 79 status-led-green { 80 gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; 81 }; 82 83 user-led1-red { 84 gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; 85 }; 86 87 user-led1-green { 88 gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; 89 }; 90 91 user-led2-red { 92 gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; 93 }; 94 95 user-led2-green { 96 gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; 97 }; 98 }; 99 100 dp_refclk: clock { 101 compatible = "fixed-clock"; 102 #clock-cells = <0>; 103 clock-frequency = <19200000>; 104 }; 105}; 106 107&wkup_pmx0 { 108 wkup_i2c0_pins_default: wkup-i2c0-pins-default { 109 pinctrl-single,pins = < 110 /* (AC7) WKUP_I2C0_SCL */ 111 AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) 112 /* (AD6) WKUP_I2C0_SDA */ 113 AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) 114 >; 115 }; 116 117 mcu_i2c0_pins_default: mcu-i2c0-pins-default { 118 pinctrl-single,pins = < 119 /* (AD8) MCU_I2C0_SCL */ 120 AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) 121 /* (AD7) MCU_I2C0_SDA */ 122 AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) 123 >; 124 }; 125 126 arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default { 127 pinctrl-single,pins = < 128 /* (R2) WKUP_GPIO0_21 */ 129 AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) 130 >; 131 }; 132 133 push_button_pins_default: push-button-pins-default { 134 pinctrl-single,pins = < 135 /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ 136 AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) 137 >; 138 }; 139 140 arduino_uart_pins_default: arduino-uart-pins-default { 141 pinctrl-single,pins = < 142 /* (P4) MCU_UART0_RXD */ 143 AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) 144 /* (P5) MCU_UART0_TXD */ 145 AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) 146 >; 147 }; 148 149 arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default { 150 pinctrl-single,pins = < 151 /* (P1) WKUP_GPIO0_31 */ 152 AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) 153 /* (N3) WKUP_GPIO0_33 */ 154 AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) 155 >; 156 }; 157 158 arduino_io_oe_pins_default: arduino-io-oe-pins-default { 159 pinctrl-single,pins = < 160 /* (N4) WKUP_GPIO0_34 */ 161 AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) 162 /* (M2) WKUP_GPIO0_36 */ 163 AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7) 164 /* (M3) WKUP_GPIO0_37 */ 165 AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7) 166 /* (M4) WKUP_GPIO0_38 */ 167 AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7) 168 /* (M1) WKUP_GPIO0_41 */ 169 AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7) 170 >; 171 }; 172 173 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { 174 pinctrl-single,pins = < 175 /* (V1) MCU_OSPI0_CLK */ 176 AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) 177 /* (U2) MCU_OSPI0_DQS */ 178 AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) 179 /* (U4) MCU_OSPI0_D0 */ 180 AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) 181 /* (U5) MCU_OSPI0_D1 */ 182 AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) 183 /* (R4) MCU_OSPI0_CSn0 */ 184 AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) 185 >; 186 }; 187 188 db9_com_mode_pins_default: db9-com-mode-pins-default { 189 pinctrl-single,pins = < 190 /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ 191 AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) 192 /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */ 193 AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7) 194 /* (AC1) WKUP_GPIO0_7, used as uart0 term */ 195 AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7) 196 /* (AC2) WKUP_GPIO0_6, used as uart0 en */ 197 AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7) 198 >; 199 }; 200 201 leds_pins_default: leds-pins-default { 202 pinctrl-single,pins = < 203 /* (T2) WKUP_GPIO0_17, used as user led1 red */ 204 AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) 205 /* (R3) WKUP_GPIO0_22, used as user led1 green */ 206 AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7) 207 /* (R5) WKUP_GPIO0_24, used as status led red */ 208 AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7) 209 /* (N2) WKUP_GPIO0_32, used as status led green */ 210 AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7) 211 >; 212 }; 213 214 mcu_spi0_pins_default: mcu-spi0-pins-default { 215 pinctrl-single,pins = < 216 /* (Y1) MCU_SPI0_CLK */ 217 AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) 218 /* (Y3) MCU_SPI0_D0 */ 219 AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) 220 /* (Y2) MCU_SPI0_D1 */ 221 AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) 222 /* (Y4) MCU_SPI0_CS0 */ 223 AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) 224 >; 225 }; 226 227 minipcie_pins_default: minipcie-pins-default { 228 pinctrl-single,pins = < 229 /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ 230 AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) 231 >; 232 }; 233}; 234 235&main_pmx0 { 236 main_uart1_pins_default: main-uart1-pins-default { 237 pinctrl-single,pins = < 238 AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ 239 AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ 240 AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */ 241 AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */ 242 >; 243 }; 244 245 main_i2c3_pins_default: main-i2c3-pins-default { 246 pinctrl-single,pins = < 247 AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ 248 AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ 249 >; 250 }; 251 252 main_mmc1_pins_default: main-mmc1-pins-default { 253 pinctrl-single,pins = < 254 AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ 255 AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ 256 AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ 257 AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ 258 AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ 259 AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ 260 AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ 261 AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */ 262 >; 263 }; 264 265 usb0_pins_default: usb0-pins-default { 266 pinctrl-single,pins = < 267 AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ 268 >; 269 }; 270 271 usb1_pins_default: usb1-pins-default { 272 pinctrl-single,pins = < 273 AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ 274 >; 275 }; 276 277 arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default { 278 pinctrl-single,pins = < 279 AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ 280 AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ 281 AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ 282 AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ 283 AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ 284 AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ 285 >; 286 }; 287 288 dss_vout1_pins_default: dss-vout1-pins-default { 289 pinctrl-single,pins = < 290 AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ 291 AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ 292 AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */ 293 AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */ 294 AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */ 295 AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */ 296 AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */ 297 AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */ 298 AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */ 299 AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */ 300 AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */ 301 AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */ 302 AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */ 303 AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */ 304 AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */ 305 AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */ 306 AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */ 307 AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */ 308 AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */ 309 AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */ 310 AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */ 311 AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */ 312 AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */ 313 AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */ 314 AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */ 315 AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */ 316 AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */ 317 AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */ 318 >; 319 }; 320 321 dp_pins_default: dp-pins-default { 322 pinctrl-single,pins = < 323 AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ 324 >; 325 }; 326 327 main_i2c2_pins_default: main-i2c2-pins-default { 328 pinctrl-single,pins = < 329 AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ 330 AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ 331 >; 332 }; 333}; 334 335&main_pmx1 { 336 main_i2c0_pins_default: main-i2c0-pins-default { 337 pinctrl-single,pins = < 338 AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ 339 AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ 340 >; 341 }; 342 343 main_i2c1_pins_default: main-i2c1-pins-default { 344 pinctrl-single,pins = < 345 AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ 346 AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ 347 >; 348 }; 349 350 ecap0_pins_default: ecap0-pins-default { 351 pinctrl-single,pins = < 352 AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ 353 >; 354 }; 355}; 356 357&wkup_uart0 { 358 /* Wakeup UART is used by System firmware */ 359 status = "reserved"; 360}; 361 362&main_uart1 { 363 status = "okay"; 364 pinctrl-names = "default"; 365 pinctrl-0 = <&main_uart1_pins_default>; 366}; 367 368&mcu_uart0 { 369 status = "okay"; 370 pinctrl-names = "default"; 371 pinctrl-0 = <&arduino_uart_pins_default>; 372}; 373 374&main_gpio0 { 375 pinctrl-names = "default"; 376 pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; 377 gpio-line-names = 378 "main_gpio0-base", "", "", "", "", "", "", "", "", "", 379 "", "", "", "", "", "", "", "", "", "", 380 "", "", "", "", "", "", "", "", "", "", 381 "", "", "", "IO4", "", "IO5", "", "", "IO6", "", 382 "", "", "", "IO7", "", "", "", "", "IO8", "", 383 "", "IO9"; 384}; 385 386&wkup_gpio0 { 387 pinctrl-names = "default"; 388 pinctrl-0 = < 389 &arduino_io_d2_to_d3_pins_default 390 &arduino_i2c_aio_switch_pins_default 391 &arduino_io_oe_pins_default 392 &push_button_pins_default 393 &db9_com_mode_pins_default 394 >; 395 gpio-line-names = 396 /* 0..9 */ 397 "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", 398 "UART0-enable", "UART0-terminate", "", "WIFI-disable", 399 /* 10..19 */ 400 "", "", "", "", "", "", "", "", "", "", 401 /* 20..29 */ 402 "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0", 403 /* 30..39 */ 404 "IO1", "IO2", "", "IO3", "IO17-direction", "A5", 405 "IO16-direction", "IO15-direction", "IO14-direction", "A3", 406 /* 40..49 */ 407 "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13", 408 "IO11", 409 /* 50..51 */ 410 "IO12", "IO10"; 411}; 412 413&wkup_i2c0 { 414 status = "okay"; 415 pinctrl-names = "default"; 416 pinctrl-0 = <&wkup_i2c0_pins_default>; 417 clock-frequency = <400000>; 418}; 419 420&mcu_i2c0 { 421 status = "okay"; 422 pinctrl-names = "default"; 423 pinctrl-0 = <&mcu_i2c0_pins_default>; 424 clock-frequency = <400000>; 425 426 psu: regulator@60 { 427 compatible = "ti,tps62363"; 428 reg = <0x60>; 429 regulator-name = "tps62363-vout"; 430 regulator-min-microvolt = <500000>; 431 regulator-max-microvolt = <1500000>; 432 regulator-boot-on; 433 ti,vsel0-state-high; 434 ti,vsel1-state-high; 435 ti,enable-vout-discharge; 436 }; 437 438 /* D4200 */ 439 pcal9535_1: gpio@20 { 440 compatible = "nxp,pcal9535"; 441 reg = <0x20>; 442 #gpio-cells = <2>; 443 gpio-controller; 444 gpio-line-names = 445 "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull", 446 "A5-pull", "", "", 447 "IO14-enable", "IO15-enable", "IO16-enable", 448 "IO17-enable", "IO18-enable", "IO19-enable"; 449 }; 450 451 /* D4201 */ 452 pcal9535_2: gpio@21 { 453 compatible = "nxp,pcal9535"; 454 reg = <0x21>; 455 #gpio-cells = <2>; 456 gpio-controller; 457 gpio-line-names = 458 "IO0-direction", "IO1-direction", "IO2-direction", 459 "IO3-direction", "IO4-direction", "IO5-direction", 460 "IO6-direction", "IO7-direction", 461 "IO8-direction", "IO9-direction", "IO10-direction", 462 "IO11-direction", "IO12-direction", "IO13-direction", 463 "IO19-direction"; 464 }; 465 466 /* D4202 */ 467 pcal9535_3: gpio@25 { 468 compatible = "nxp,pcal9535"; 469 reg = <0x25>; 470 #gpio-cells = <2>; 471 gpio-controller; 472 gpio-line-names = 473 "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull", 474 "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull", 475 "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull", 476 "IO12-pull", "IO13-pull"; 477 }; 478}; 479 480&main_i2c0 { 481 status = "okay"; 482 pinctrl-names = "default"; 483 pinctrl-0 = <&main_i2c0_pins_default>; 484 clock-frequency = <400000>; 485 486 rtc: rtc8564@51 { 487 compatible = "nxp,pcf8563"; 488 reg = <0x51>; 489 }; 490 491 eeprom: eeprom@54 { 492 compatible = "atmel,24c08"; 493 reg = <0x54>; 494 pagesize = <16>; 495 }; 496}; 497 498&main_i2c1 { 499 status = "okay"; 500 pinctrl-names = "default"; 501 pinctrl-0 = <&main_i2c1_pins_default>; 502 clock-frequency = <400000>; 503}; 504 505&main_i2c2 { 506 status = "okay"; 507 pinctrl-names = "default"; 508 pinctrl-0 = <&main_i2c2_pins_default>; 509 clock-frequency = <400000>; 510}; 511 512&main_i2c3 { 513 status = "okay"; 514 pinctrl-names = "default"; 515 pinctrl-0 = <&main_i2c3_pins_default>; 516 clock-frequency = <400000>; 517 518 #address-cells = <1>; 519 #size-cells = <0>; 520 521 edp-bridge@f { 522 compatible = "toshiba,tc358767"; 523 reg = <0x0f>; 524 pinctrl-names = "default"; 525 pinctrl-0 = <&dp_pins_default>; 526 reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; 527 528 clock-names = "ref"; 529 clocks = <&dp_refclk>; 530 531 toshiba,hpd-pin = <0>; 532 533 ports { 534 #address-cells = <1>; 535 #size-cells = <0>; 536 537 port@1 { 538 reg = <1>; 539 540 bridge_in: endpoint { 541 remote-endpoint = <&dpi_out>; 542 }; 543 }; 544 }; 545 }; 546}; 547 548&mcu_cpsw { 549 status = "disabled"; 550}; 551 552&ecap0 { 553 status = "okay"; 554 pinctrl-names = "default"; 555 pinctrl-0 = <&ecap0_pins_default>; 556}; 557 558&sdhci1 { 559 pinctrl-names = "default"; 560 pinctrl-0 = <&main_mmc1_pins_default>; 561 ti,driver-strength-ohm = <50>; 562 disable-wp; 563}; 564 565&usb0 { 566 pinctrl-names = "default"; 567 pinctrl-0 = <&usb0_pins_default>; 568 dr_mode = "host"; 569}; 570 571&usb1 { 572 pinctrl-names = "default"; 573 pinctrl-0 = <&usb1_pins_default>; 574 dr_mode = "host"; 575}; 576 577&mcu_spi0 { 578 status = "okay"; 579 pinctrl-names = "default"; 580 pinctrl-0 = <&mcu_spi0_pins_default>; 581 582 #address-cells = <1>; 583 #size-cells = <0>; 584 ti,pindir-d0-out-d1-in; 585}; 586 587&tscadc0 { 588 status = "disabled"; 589}; 590 591&tscadc1 { 592 adc { 593 ti,adc-channels = <0 1 2 3 4 5>; 594 }; 595}; 596 597&ospi0 { 598 pinctrl-names = "default"; 599 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; 600 601 flash@0 { 602 compatible = "jedec,spi-nor"; 603 reg = <0x0>; 604 spi-tx-bus-width = <1>; 605 spi-rx-bus-width = <1>; 606 spi-max-frequency = <50000000>; 607 cdns,tshsl-ns = <60>; 608 cdns,tsd2d-ns = <60>; 609 cdns,tchsh-ns = <60>; 610 cdns,tslch-ns = <60>; 611 cdns,read-delay = <2>; 612 }; 613}; 614 615&dss { 616 pinctrl-names = "default"; 617 pinctrl-0 = <&dss_vout1_pins_default>; 618 619 assigned-clocks = <&k3_clks 67 2>; 620 assigned-clock-parents = <&k3_clks 67 5>; 621}; 622 623&dss_ports { 624 #address-cells = <1>; 625 #size-cells = <0>; 626 port@1 { 627 reg = <1>; 628 629 dpi_out: endpoint { 630 remote-endpoint = <&bridge_in>; 631 }; 632 }; 633}; 634 635&pcie1_rc { 636 status = "okay"; 637 pinctrl-names = "default"; 638 pinctrl-0 = <&minipcie_pins_default>; 639 640 num-lanes = <1>; 641 phys = <&serdes1 PHY_TYPE_PCIE 0>; 642 phy-names = "pcie-phy0"; 643 reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; 644}; 645 646&mailbox0_cluster0 { 647 status = "okay"; 648 interrupts = <436>; 649 650 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { 651 ti,mbox-tx = <1 0 0>; 652 ti,mbox-rx = <0 0 0>; 653 }; 654}; 655 656&mailbox0_cluster1 { 657 status = "okay"; 658 interrupts = <432>; 659 660 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { 661 ti,mbox-tx = <1 0 0>; 662 ti,mbox-rx = <0 0 0>; 663 }; 664}; 665 666&mcu_r5fss0_core0 { 667 memory-region = <&mcu_r5fss0_core0_dma_memory_region>, 668 <&mcu_r5fss0_core0_memory_region>; 669 mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; 670}; 671 672&mcu_r5fss0_core1 { 673 memory-region = <&mcu_r5fss0_core1_dma_memory_region>, 674 <&mcu_r5fss0_core1_memory_region>; 675 mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; 676}; 677