1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/phy/phy.h> 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/net/ti-dp83867.h> 11#include <dt-bindings/leds/common.h> 12#include "k3-am642.dtsi" 13 14#include "k3-serdes.h" 15 16/ { 17 compatible = "ti,am642-sk", "ti,am642"; 18 model = "Texas Instruments AM642 SK"; 19 20 chosen { 21 stdout-path = &main_uart0; 22 }; 23 24 aliases { 25 serial0 = &mcu_uart0; 26 serial1 = &main_uart1; 27 serial2 = &main_uart0; 28 i2c0 = &main_i2c0; 29 i2c1 = &main_i2c1; 30 mmc0 = &sdhci0; 31 mmc1 = &sdhci1; 32 ethernet0 = &cpsw_port1; 33 ethernet1 = &cpsw_port2; 34 }; 35 36 memory@80000000 { 37 bootph-pre-ram; 38 device_type = "memory"; 39 /* 2G RAM */ 40 reg = <0x00000000 0x80000000 0x00000000 0x80000000>; 41 }; 42 43 reserved-memory { 44 #address-cells = <2>; 45 #size-cells = <2>; 46 ranges; 47 48 secure_ddr: optee@9e800000 { 49 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ 50 alignment = <0x1000>; 51 no-map; 52 }; 53 54 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 55 compatible = "shared-dma-pool"; 56 reg = <0x00 0xa0000000 0x00 0x100000>; 57 no-map; 58 }; 59 60 main_r5fss0_core0_memory_region: r5f-memory@a0100000 { 61 compatible = "shared-dma-pool"; 62 reg = <0x00 0xa0100000 0x00 0xf00000>; 63 no-map; 64 }; 65 66 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 67 compatible = "shared-dma-pool"; 68 reg = <0x00 0xa1000000 0x00 0x100000>; 69 no-map; 70 }; 71 72 main_r5fss0_core1_memory_region: r5f-memory@a1100000 { 73 compatible = "shared-dma-pool"; 74 reg = <0x00 0xa1100000 0x00 0xf00000>; 75 no-map; 76 }; 77 78 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { 79 compatible = "shared-dma-pool"; 80 reg = <0x00 0xa2000000 0x00 0x100000>; 81 no-map; 82 }; 83 84 main_r5fss1_core0_memory_region: r5f-memory@a2100000 { 85 compatible = "shared-dma-pool"; 86 reg = <0x00 0xa2100000 0x00 0xf00000>; 87 no-map; 88 }; 89 90 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { 91 compatible = "shared-dma-pool"; 92 reg = <0x00 0xa3000000 0x00 0x100000>; 93 no-map; 94 }; 95 96 main_r5fss1_core1_memory_region: r5f-memory@a3100000 { 97 compatible = "shared-dma-pool"; 98 reg = <0x00 0xa3100000 0x00 0xf00000>; 99 no-map; 100 }; 101 102 rtos_ipc_memory_region: ipc-memories@a5000000 { 103 reg = <0x00 0xa5000000 0x00 0x00800000>; 104 alignment = <0x1000>; 105 no-map; 106 }; 107 }; 108 109 vusb_main: regulator-0 { 110 /* USB MAIN INPUT 5V DC */ 111 bootph-all; 112 compatible = "regulator-fixed"; 113 regulator-name = "vusb_main5v0"; 114 regulator-min-microvolt = <5000000>; 115 regulator-max-microvolt = <5000000>; 116 regulator-always-on; 117 regulator-boot-on; 118 }; 119 120 vcc_3v3_sys: regulator-1 { 121 /* output of LP8733xx */ 122 bootph-all; 123 compatible = "regulator-fixed"; 124 regulator-name = "vcc_3v3_sys"; 125 regulator-min-microvolt = <3300000>; 126 regulator-max-microvolt = <3300000>; 127 vin-supply = <&vusb_main>; 128 regulator-always-on; 129 regulator-boot-on; 130 }; 131 132 vdd_mmc1: regulator-2 { 133 /* TPS2051BD */ 134 bootph-all; 135 compatible = "regulator-fixed"; 136 regulator-name = "vdd_mmc1"; 137 regulator-min-microvolt = <3300000>; 138 regulator-max-microvolt = <3300000>; 139 regulator-boot-on; 140 enable-active-high; 141 vin-supply = <&vcc_3v3_sys>; 142 gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; 143 }; 144 145 com8_ls_en: regulator-3 { 146 compatible = "regulator-fixed"; 147 regulator-name = "com8_ls_en"; 148 regulator-min-microvolt = <3300000>; 149 regulator-max-microvolt = <3300000>; 150 regulator-always-on; 151 regulator-boot-on; 152 pinctrl-0 = <&main_com8_ls_en_pins_default>; 153 pinctrl-names = "default"; 154 gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; 155 }; 156 157 wlan_en: regulator-4 { 158 /* output of SN74AVC4T245RSVR */ 159 compatible = "regulator-fixed"; 160 regulator-name = "wlan_en"; 161 regulator-min-microvolt = <1800000>; 162 regulator-max-microvolt = <1800000>; 163 enable-active-high; 164 pinctrl-0 = <&main_wlan_en_pins_default>; 165 pinctrl-names = "default"; 166 vin-supply = <&com8_ls_en>; 167 gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; 168 }; 169 170 led-controller { 171 compatible = "gpio-leds"; 172 173 led-0 { 174 color = <LED_COLOR_ID_GREEN>; 175 function = LED_FUNCTION_INDICATOR; 176 function-enumerator = <1>; 177 gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; 178 default-state = "off"; 179 }; 180 181 led-1 { 182 color = <LED_COLOR_ID_RED>; 183 function = LED_FUNCTION_INDICATOR; 184 function-enumerator = <2>; 185 gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; 186 default-state = "off"; 187 }; 188 189 led-2 { 190 color = <LED_COLOR_ID_GREEN>; 191 function = LED_FUNCTION_INDICATOR; 192 function-enumerator = <3>; 193 gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; 194 default-state = "off"; 195 }; 196 197 led-3 { 198 color = <LED_COLOR_ID_AMBER>; 199 function = LED_FUNCTION_INDICATOR; 200 function-enumerator = <4>; 201 gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; 202 default-state = "off"; 203 }; 204 205 led-4 { 206 color = <LED_COLOR_ID_GREEN>; 207 function = LED_FUNCTION_INDICATOR; 208 function-enumerator = <5>; 209 gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; 210 default-state = "off"; 211 }; 212 213 led-5 { 214 color = <LED_COLOR_ID_RED>; 215 function = LED_FUNCTION_INDICATOR; 216 function-enumerator = <6>; 217 gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; 218 default-state = "off"; 219 }; 220 221 led-6 { 222 color = <LED_COLOR_ID_GREEN>; 223 function = LED_FUNCTION_INDICATOR; 224 function-enumerator = <7>; 225 gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; 226 default-state = "off"; 227 }; 228 229 led-7 { 230 color = <LED_COLOR_ID_AMBER>; 231 function = LED_FUNCTION_HEARTBEAT; 232 function-enumerator = <8>; 233 linux,default-trigger = "heartbeat"; 234 gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; 235 }; 236 }; 237}; 238 239&main_pmx0 { 240 main_mmc1_pins_default: main-mmc1-default-pins { 241 bootph-all; 242 pinctrl-single,pins = < 243 AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ 244 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ 245 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ 246 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */ 247 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ 248 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ 249 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ 250 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ 251 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ 252 >; 253 }; 254 255 main_uart0_pins_default: main-uart0-default-pins { 256 bootph-all; 257 pinctrl-single,pins = < 258 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ 259 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ 260 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ 261 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 262 >; 263 }; 264 265 main_uart1_pins_default: main-uart1-default-pins { 266 bootph-pre-ram; 267 pinctrl-single,pins = < 268 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ 269 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ 270 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ 271 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ 272 >; 273 }; 274 275 main_usb0_pins_default: main-usb0-default-pins { 276 bootph-all; 277 pinctrl-single,pins = < 278 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ 279 >; 280 }; 281 282 main_i2c0_pins_default: main-i2c0-default-pins { 283 bootph-all; 284 pinctrl-single,pins = < 285 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ 286 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ 287 >; 288 }; 289 290 main_i2c1_pins_default: main-i2c1-default-pins { 291 bootph-all; 292 pinctrl-single,pins = < 293 AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ 294 AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ 295 >; 296 }; 297 298 mdio1_pins_default: mdio1-default-pins { 299 pinctrl-single,pins = < 300 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ 301 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ 302 >; 303 }; 304 305 rgmii1_pins_default: rgmii1-default-pins { 306 pinctrl-single,pins = < 307 AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ 308 AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ 309 AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */ 310 AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */ 311 AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */ 312 AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */ 313 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ 314 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ 315 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ 316 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ 317 AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ 318 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ 319 >; 320 }; 321 322 rgmii2_pins_default: rgmii2-default-pins { 323 pinctrl-single,pins = < 324 AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ 325 AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ 326 AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ 327 AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ 328 AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ 329 AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ 330 AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ 331 AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ 332 AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ 333 AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ 334 AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ 335 AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ 336 >; 337 }; 338 339 ospi0_pins_default: ospi0-default-pins { 340 pinctrl-single,pins = < 341 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ 342 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ 343 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ 344 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ 345 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ 346 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ 347 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ 348 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ 349 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ 350 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ 351 AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ 352 >; 353 }; 354 355 main_ecap0_pins_default: main-ecap0-default-pins { 356 pinctrl-single,pins = < 357 AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ 358 >; 359 }; 360 main_wlan_en_pins_default: main-wlan-en-default-pins { 361 pinctrl-single,pins = < 362 AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ 363 >; 364 }; 365 366 main_com8_ls_en_pins_default: main-com8-ls-en-default-pins { 367 pinctrl-single,pins = < 368 AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ 369 >; 370 }; 371 372 main_wlan_pins_default: main-wlan-default-pins { 373 pinctrl-single,pins = < 374 AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ 375 >; 376 }; 377}; 378 379&main_uart0 { 380 bootph-all; 381 status = "okay"; 382 pinctrl-names = "default"; 383 pinctrl-0 = <&main_uart0_pins_default>; 384 current-speed = <115200>; 385}; 386 387&main_uart1 { 388 /* main_uart1 is reserved for firmware usage */ 389 bootph-pre-ram; 390 status = "reserved"; 391 pinctrl-names = "default"; 392 pinctrl-0 = <&main_uart1_pins_default>; 393}; 394 395&main_i2c0 { 396 bootph-all; 397 status = "okay"; 398 pinctrl-names = "default"; 399 pinctrl-0 = <&main_i2c0_pins_default>; 400 clock-frequency = <400000>; 401 402 eeprom@51 { 403 compatible = "atmel,24c512"; 404 reg = <0x51>; 405 }; 406}; 407 408&main_i2c1 { 409 bootph-all; 410 status = "okay"; 411 pinctrl-names = "default"; 412 pinctrl-0 = <&main_i2c1_pins_default>; 413 clock-frequency = <400000>; 414 415 exp1: gpio@70 { 416 bootph-all; 417 compatible = "nxp,pca9538"; 418 reg = <0x70>; 419 gpio-controller; 420 #gpio-cells = <2>; 421 gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", 422 "PRU_DETECT", "MMC1_SD_EN", 423 "VPP_LDO_EN", "RPI_PS_3V3_En", 424 "RPI_PS_5V0_En", "RPI_HAT_DETECT"; 425 }; 426 427 exp2: gpio@60 { 428 compatible = "ti,tpic2810"; 429 reg = <0x60>; 430 gpio-controller; 431 #gpio-cells = <2>; 432 gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; 433 }; 434}; 435 436/* mcu_gpio0 is reserved for mcu firmware usage */ 437&mcu_gpio0 { 438 status = "reserved"; 439}; 440 441&sdhci0 { 442 status = "okay"; 443 vmmc-supply = <&wlan_en>; 444 bus-width = <4>; 445 non-removable; 446 cap-power-off-card; 447 keep-power-in-suspend; 448 ti,driver-strength-ohm = <50>; 449 450 #address-cells = <1>; 451 #size-cells = <0>; 452 wlcore: wlcore@2 { 453 compatible = "ti,wl1837"; 454 reg = <2>; 455 pinctrl-0 = <&main_wlan_pins_default>; 456 pinctrl-names = "default"; 457 interrupt-parent = <&main_gpio0>; 458 interrupts = <46 IRQ_TYPE_EDGE_FALLING>; 459 }; 460}; 461 462/* SD/MMC */ 463&sdhci1 { 464 bootph-all; 465 status = "okay"; 466 vmmc-supply = <&vdd_mmc1>; 467 pinctrl-names = "default"; 468 bus-width = <4>; 469 pinctrl-0 = <&main_mmc1_pins_default>; 470 ti,driver-strength-ohm = <50>; 471 disable-wp; 472}; 473 474&serdes_ln_ctrl { 475 bootph-all; 476 idle-states = <AM64_SERDES0_LANE0_USB>; 477}; 478 479&serdes_refclk { 480 bootph-all; 481}; 482 483&serdes_wiz0 { 484 bootph-all; 485}; 486 487&serdes0 { 488 bootph-all; 489 serdes0_usb_link: phy@0 { 490 bootph-all; 491 reg = <0>; 492 cdns,num-lanes = <1>; 493 #phy-cells = <0>; 494 cdns,phy-type = <PHY_TYPE_USB3>; 495 resets = <&serdes_wiz0 1>; 496 }; 497}; 498 499&usbss0 { 500 bootph-all; 501 ti,vbus-divider; 502}; 503 504&usb0 { 505 bootph-all; 506 dr_mode = "host"; 507 maximum-speed = "super-speed"; 508 pinctrl-names = "default"; 509 pinctrl-0 = <&main_usb0_pins_default>; 510 phys = <&serdes0_usb_link>; 511 phy-names = "cdns3,usb3-phy"; 512}; 513 514&cpsw3g { 515 pinctrl-names = "default"; 516 pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; 517}; 518 519&cpsw_port1 { 520 phy-mode = "rgmii-rxid"; 521 phy-handle = <&cpsw3g_phy0>; 522}; 523 524&cpsw_port2 { 525 phy-mode = "rgmii-rxid"; 526 phy-handle = <&cpsw3g_phy1>; 527}; 528 529&cpsw3g_mdio { 530 status = "okay"; 531 pinctrl-names = "default"; 532 pinctrl-0 = <&mdio1_pins_default>; 533 534 cpsw3g_phy0: ethernet-phy@0 { 535 reg = <0>; 536 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 537 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 538 }; 539 540 cpsw3g_phy1: ethernet-phy@1 { 541 reg = <1>; 542 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 543 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 544 }; 545}; 546 547&ospi0 { 548 status = "okay"; 549 pinctrl-names = "default"; 550 pinctrl-0 = <&ospi0_pins_default>; 551 552 flash@0 { 553 compatible = "jedec,spi-nor"; 554 reg = <0x0>; 555 spi-tx-bus-width = <8>; 556 spi-rx-bus-width = <8>; 557 spi-max-frequency = <25000000>; 558 cdns,tshsl-ns = <60>; 559 cdns,tsd2d-ns = <60>; 560 cdns,tchsh-ns = <60>; 561 cdns,tslch-ns = <60>; 562 cdns,read-delay = <4>; 563 564 partitions { 565 compatible = "fixed-partitions"; 566 #address-cells = <1>; 567 #size-cells = <1>; 568 569 partition@0 { 570 label = "ospi.tiboot3"; 571 reg = <0x0 0x100000>; 572 }; 573 574 partition@100000 { 575 label = "ospi.tispl"; 576 reg = <0x100000 0x200000>; 577 }; 578 579 partition@300000 { 580 label = "ospi.u-boot"; 581 reg = <0x300000 0x400000>; 582 }; 583 584 partition@700000 { 585 label = "ospi.env"; 586 reg = <0x700000 0x40000>; 587 }; 588 589 partition@740000 { 590 label = "ospi.env.backup"; 591 reg = <0x740000 0x40000>; 592 }; 593 594 partition@800000 { 595 label = "ospi.rootfs"; 596 reg = <0x800000 0x37c0000>; 597 }; 598 599 partition@3fc0000 { 600 label = "ospi.phypattern"; 601 reg = <0x3fc0000 0x40000>; 602 }; 603 }; 604 }; 605}; 606 607&mailbox0_cluster2 { 608 status = "okay"; 609 610 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 611 ti,mbox-rx = <0 0 2>; 612 ti,mbox-tx = <1 0 2>; 613 }; 614 615 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 616 ti,mbox-rx = <2 0 2>; 617 ti,mbox-tx = <3 0 2>; 618 }; 619}; 620 621&mailbox0_cluster4 { 622 status = "okay"; 623 624 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 625 ti,mbox-rx = <0 0 2>; 626 ti,mbox-tx = <1 0 2>; 627 }; 628 629 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 630 ti,mbox-rx = <2 0 2>; 631 ti,mbox-tx = <3 0 2>; 632 }; 633}; 634 635&mailbox0_cluster6 { 636 status = "okay"; 637 638 mbox_m4_0: mbox-m4-0 { 639 ti,mbox-rx = <0 0 2>; 640 ti,mbox-tx = <1 0 2>; 641 }; 642}; 643 644&main_r5fss0_core0 { 645 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; 646 memory-region = <&main_r5fss0_core0_dma_memory_region>, 647 <&main_r5fss0_core0_memory_region>; 648}; 649 650&main_r5fss0_core1 { 651 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; 652 memory-region = <&main_r5fss0_core1_dma_memory_region>, 653 <&main_r5fss0_core1_memory_region>; 654}; 655 656&main_r5fss1_core0 { 657 mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; 658 memory-region = <&main_r5fss1_core0_dma_memory_region>, 659 <&main_r5fss1_core0_memory_region>; 660}; 661 662&main_r5fss1_core1 { 663 mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; 664 memory-region = <&main_r5fss1_core1_dma_memory_region>, 665 <&main_r5fss1_core1_memory_region>; 666}; 667 668&ecap0 { 669 status = "okay"; 670 /* PWM is available on Pin 1 of header J3 */ 671 pinctrl-names = "default"; 672 pinctrl-0 = <&main_ecap0_pins_default>; 673}; 674