1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/phy/phy.h> 9#include <dt-bindings/mux/ti-serdes.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/net/ti-dp83867.h> 13#include "k3-am642.dtsi" 14 15/ { 16 compatible = "ti,am642-evm", "ti,am642"; 17 model = "Texas Instruments AM642 EVM"; 18 19 chosen { 20 stdout-path = "serial2:115200n8"; 21 bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; 22 }; 23 24 memory@80000000 { 25 device_type = "memory"; 26 /* 2G RAM */ 27 reg = <0x00000000 0x80000000 0x00000000 0x80000000>; 28 29 }; 30 31 reserved-memory { 32 #address-cells = <2>; 33 #size-cells = <2>; 34 ranges; 35 36 secure_ddr: optee@9e800000 { 37 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ 38 alignment = <0x1000>; 39 no-map; 40 }; 41 42 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 43 compatible = "shared-dma-pool"; 44 reg = <0x00 0xa0000000 0x00 0x100000>; 45 no-map; 46 }; 47 48 main_r5fss0_core0_memory_region: r5f-memory@a0100000 { 49 compatible = "shared-dma-pool"; 50 reg = <0x00 0xa0100000 0x00 0xf00000>; 51 no-map; 52 }; 53 54 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 55 compatible = "shared-dma-pool"; 56 reg = <0x00 0xa1000000 0x00 0x100000>; 57 no-map; 58 }; 59 60 main_r5fss0_core1_memory_region: r5f-memory@a1100000 { 61 compatible = "shared-dma-pool"; 62 reg = <0x00 0xa1100000 0x00 0xf00000>; 63 no-map; 64 }; 65 66 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { 67 compatible = "shared-dma-pool"; 68 reg = <0x00 0xa2000000 0x00 0x100000>; 69 no-map; 70 }; 71 72 main_r5fss1_core0_memory_region: r5f-memory@a2100000 { 73 compatible = "shared-dma-pool"; 74 reg = <0x00 0xa2100000 0x00 0xf00000>; 75 no-map; 76 }; 77 78 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { 79 compatible = "shared-dma-pool"; 80 reg = <0x00 0xa3000000 0x00 0x100000>; 81 no-map; 82 }; 83 84 main_r5fss1_core1_memory_region: r5f-memory@a3100000 { 85 compatible = "shared-dma-pool"; 86 reg = <0x00 0xa3100000 0x00 0xf00000>; 87 no-map; 88 }; 89 90 rtos_ipc_memory_region: ipc-memories@a5000000 { 91 reg = <0x00 0xa5000000 0x00 0x00800000>; 92 alignment = <0x1000>; 93 no-map; 94 }; 95 }; 96 97 evm_12v0: fixedregulator-evm12v0 { 98 /* main DC jack */ 99 compatible = "regulator-fixed"; 100 regulator-name = "evm_12v0"; 101 regulator-min-microvolt = <12000000>; 102 regulator-max-microvolt = <12000000>; 103 regulator-always-on; 104 regulator-boot-on; 105 }; 106 107 vsys_5v0: fixedregulator-vsys5v0 { 108 /* output of LM5140 */ 109 compatible = "regulator-fixed"; 110 regulator-name = "vsys_5v0"; 111 regulator-min-microvolt = <5000000>; 112 regulator-max-microvolt = <5000000>; 113 vin-supply = <&evm_12v0>; 114 regulator-always-on; 115 regulator-boot-on; 116 }; 117 118 vsys_3v3: fixedregulator-vsys3v3 { 119 /* output of LM5140 */ 120 compatible = "regulator-fixed"; 121 regulator-name = "vsys_3v3"; 122 regulator-min-microvolt = <3300000>; 123 regulator-max-microvolt = <3300000>; 124 vin-supply = <&evm_12v0>; 125 regulator-always-on; 126 regulator-boot-on; 127 }; 128 129 vdd_mmc1: fixed-regulator-sd { 130 /* TPS2051BD */ 131 compatible = "regulator-fixed"; 132 regulator-name = "vdd_mmc1"; 133 regulator-min-microvolt = <3300000>; 134 regulator-max-microvolt = <3300000>; 135 regulator-boot-on; 136 enable-active-high; 137 vin-supply = <&vsys_3v3>; 138 gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; 139 }; 140 141 vddb: fixedregulator-vddb { 142 compatible = "regulator-fixed"; 143 regulator-name = "vddb_3v3_display"; 144 regulator-min-microvolt = <3300000>; 145 regulator-max-microvolt = <3300000>; 146 vin-supply = <&vsys_3v3>; 147 regulator-always-on; 148 regulator-boot-on; 149 }; 150 151 leds { 152 compatible = "gpio-leds"; 153 154 led-0 { 155 label = "am64-evm:red:heartbeat"; 156 gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; 157 linux,default-trigger = "heartbeat"; 158 function = LED_FUNCTION_HEARTBEAT; 159 default-state = "off"; 160 }; 161 }; 162 163 mdio_mux: mux-controller { 164 compatible = "gpio-mux"; 165 #mux-control-cells = <0>; 166 167 mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; 168 }; 169 170 mdio-mux-1 { 171 compatible = "mdio-mux-multiplexer"; 172 mux-controls = <&mdio_mux>; 173 mdio-parent-bus = <&cpsw3g_mdio>; 174 #address-cells = <1>; 175 #size-cells = <0>; 176 177 mdio@1 { 178 reg = <0x1>; 179 #address-cells = <1>; 180 #size-cells = <0>; 181 182 cpsw3g_phy3: ethernet-phy@3 { 183 reg = <3>; 184 }; 185 }; 186 }; 187 188 transceiver1: can-phy0 { 189 compatible = "ti,tcan1042"; 190 #phy-cells = <0>; 191 max-bitrate = <5000000>; 192 standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; 193 }; 194 195 transceiver2: can-phy1 { 196 compatible = "ti,tcan1042"; 197 #phy-cells = <0>; 198 max-bitrate = <5000000>; 199 standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; 200 }; 201}; 202 203&main_pmx0 { 204 main_mmc1_pins_default: main-mmc1-pins-default { 205 pinctrl-single,pins = < 206 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ 207 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ 208 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ 209 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ 210 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ 211 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ 212 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ 213 AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ 214 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ 215 >; 216 }; 217 218 main_uart0_pins_default: main-uart0-pins-default { 219 pinctrl-single,pins = < 220 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ 221 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ 222 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ 223 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 224 >; 225 }; 226 227 main_spi0_pins_default: main-spi0-pins-default { 228 pinctrl-single,pins = < 229 AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ 230 AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ 231 AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ 232 AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ 233 >; 234 }; 235 236 main_i2c0_pins_default: main-i2c0-pins-default { 237 pinctrl-single,pins = < 238 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ 239 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ 240 >; 241 }; 242 243 main_i2c1_pins_default: main-i2c1-pins-default { 244 pinctrl-single,pins = < 245 AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ 246 AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ 247 >; 248 }; 249 250 mdio1_pins_default: mdio1-pins-default { 251 pinctrl-single,pins = < 252 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ 253 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ 254 >; 255 }; 256 257 rgmii1_pins_default: rgmii1-pins-default { 258 pinctrl-single,pins = < 259 AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ 260 AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ 261 AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ 262 AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ 263 AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ 264 AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ 265 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ 266 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ 267 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ 268 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ 269 AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ 270 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ 271 >; 272 }; 273 274 rgmii2_pins_default: rgmii2-pins-default { 275 pinctrl-single,pins = < 276 AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ 277 AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ 278 AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ 279 AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ 280 AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ 281 AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ 282 AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ 283 AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ 284 AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ 285 AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ 286 AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ 287 AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ 288 >; 289 }; 290 291 main_usb0_pins_default: main-usb0-pins-default { 292 pinctrl-single,pins = < 293 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ 294 >; 295 }; 296 297 ospi0_pins_default: ospi0-pins-default { 298 pinctrl-single,pins = < 299 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ 300 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ 301 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ 302 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ 303 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ 304 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ 305 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ 306 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ 307 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ 308 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ 309 AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ 310 >; 311 }; 312 313 main_ecap0_pins_default: main-ecap0-pins-default { 314 pinctrl-single,pins = < 315 AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ 316 >; 317 }; 318 319 main_mcan0_pins_default: main-mcan0-pins-default { 320 pinctrl-single,pins = < 321 AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ 322 AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ 323 >; 324 }; 325 326 main_mcan1_pins_default: main-mcan1-pins-default { 327 pinctrl-single,pins = < 328 AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ 329 AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ 330 >; 331 }; 332}; 333 334&main_uart0 { 335 status = "okay"; 336 pinctrl-names = "default"; 337 pinctrl-0 = <&main_uart0_pins_default>; 338}; 339 340/* main_uart1 is reserved for firmware usage */ 341&main_uart1 { 342 status = "reserved"; 343}; 344 345&main_i2c0 { 346 status = "okay"; 347 pinctrl-names = "default"; 348 pinctrl-0 = <&main_i2c0_pins_default>; 349 clock-frequency = <400000>; 350 351 eeprom@50 { 352 /* AT24CM01 */ 353 compatible = "atmel,24c1024"; 354 reg = <0x50>; 355 }; 356}; 357 358&main_i2c1 { 359 status = "okay"; 360 pinctrl-names = "default"; 361 pinctrl-0 = <&main_i2c1_pins_default>; 362 clock-frequency = <400000>; 363 364 exp1: gpio@22 { 365 compatible = "ti,tca6424"; 366 reg = <0x22>; 367 gpio-controller; 368 #gpio-cells = <2>; 369 gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", 370 "GPIO_CPSW1_RST", "GPIO_RGMII1_RST", 371 "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", 372 "MMC1_SD_EN", "FSI_FET_SEL", 373 "MCAN0_STB_3V3", "MCAN1_STB_3V3", 374 "CPSW_FET_SEL", "CPSW_FET2_SEL", 375 "PRG1_RGMII2_FET_SEL", "TEST_GPIO2", 376 "GPIO_OLED_RESETn", "VPP_LDO_EN", 377 "TEST_LED1", "TP92", "TP90", "TP88", 378 "TP87", "TP86", "TP89", "TP91"; 379 }; 380 381 /* osd9616p0899-10 */ 382 display@3c { 383 compatible = "solomon,ssd1306fb-i2c"; 384 reg = <0x3c>; 385 reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; 386 vbat-supply = <&vddb>; 387 solomon,height = <16>; 388 solomon,width = <96>; 389 solomon,com-seq; 390 solomon,com-invdir; 391 solomon,page-offset = <0>; 392 solomon,prechargep1 = <2>; 393 solomon,prechargep2 = <13>; 394 }; 395}; 396 397/* mcu_gpio0 is reserved for mcu firmware usage */ 398&mcu_gpio0 { 399 status = "reserved"; 400}; 401 402&main_spi0 { 403 status = "okay"; 404 pinctrl-names = "default"; 405 pinctrl-0 = <&main_spi0_pins_default>; 406 ti,pindir-d0-out-d1-in; 407 eeprom@0 { 408 compatible = "microchip,93lc46b"; 409 reg = <0>; 410 spi-max-frequency = <1000000>; 411 spi-cs-high; 412 data-size = <16>; 413 }; 414}; 415 416&sdhci0 { 417 /* emmc */ 418 bus-width = <8>; 419 non-removable; 420 ti,driver-strength-ohm = <50>; 421 disable-wp; 422}; 423 424&sdhci1 { 425 /* SD/MMC */ 426 vmmc-supply = <&vdd_mmc1>; 427 pinctrl-names = "default"; 428 bus-width = <4>; 429 pinctrl-0 = <&main_mmc1_pins_default>; 430 ti,driver-strength-ohm = <50>; 431 disable-wp; 432}; 433 434&usbss0 { 435 ti,vbus-divider; 436 ti,usb2-only; 437}; 438 439&usb0 { 440 dr_mode = "otg"; 441 maximum-speed = "high-speed"; 442 pinctrl-names = "default"; 443 pinctrl-0 = <&main_usb0_pins_default>; 444}; 445 446&cpsw3g { 447 pinctrl-names = "default"; 448 pinctrl-0 = <&rgmii1_pins_default 449 &rgmii2_pins_default>; 450}; 451 452&cpsw_port1 { 453 phy-mode = "rgmii-rxid"; 454 phy-handle = <&cpsw3g_phy0>; 455}; 456 457&cpsw_port2 { 458 phy-mode = "rgmii-rxid"; 459 phy-handle = <&cpsw3g_phy3>; 460}; 461 462&cpsw3g_mdio { 463 status = "okay"; 464 pinctrl-names = "default"; 465 pinctrl-0 = <&mdio1_pins_default>; 466 467 cpsw3g_phy0: ethernet-phy@0 { 468 reg = <0>; 469 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 470 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 471 }; 472}; 473 474&tscadc0 { 475 /* ADC is reserved for R5 usage */ 476 status = "reserved"; 477}; 478 479&ospi0 { 480 pinctrl-names = "default"; 481 pinctrl-0 = <&ospi0_pins_default>; 482 483 flash@0 { 484 compatible = "jedec,spi-nor"; 485 reg = <0x0>; 486 spi-tx-bus-width = <8>; 487 spi-rx-bus-width = <8>; 488 spi-max-frequency = <25000000>; 489 cdns,tshsl-ns = <60>; 490 cdns,tsd2d-ns = <60>; 491 cdns,tchsh-ns = <60>; 492 cdns,tslch-ns = <60>; 493 cdns,read-delay = <4>; 494 }; 495}; 496 497&mailbox0_cluster2 { 498 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 499 ti,mbox-rx = <0 0 2>; 500 ti,mbox-tx = <1 0 2>; 501 }; 502 503 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 504 ti,mbox-rx = <2 0 2>; 505 ti,mbox-tx = <3 0 2>; 506 }; 507}; 508 509&mailbox0_cluster3 { 510 status = "disabled"; 511}; 512 513&mailbox0_cluster4 { 514 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 515 ti,mbox-rx = <0 0 2>; 516 ti,mbox-tx = <1 0 2>; 517 }; 518 519 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 520 ti,mbox-rx = <2 0 2>; 521 ti,mbox-tx = <3 0 2>; 522 }; 523}; 524 525&mailbox0_cluster5 { 526 status = "disabled"; 527}; 528 529&mailbox0_cluster6 { 530 mbox_m4_0: mbox-m4-0 { 531 ti,mbox-rx = <0 0 2>; 532 ti,mbox-tx = <1 0 2>; 533 }; 534}; 535 536&mailbox0_cluster7 { 537 status = "disabled"; 538}; 539 540&main_r5fss0_core0 { 541 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; 542 memory-region = <&main_r5fss0_core0_dma_memory_region>, 543 <&main_r5fss0_core0_memory_region>; 544}; 545 546&main_r5fss0_core1 { 547 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; 548 memory-region = <&main_r5fss0_core1_dma_memory_region>, 549 <&main_r5fss0_core1_memory_region>; 550}; 551 552&main_r5fss1_core0 { 553 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; 554 memory-region = <&main_r5fss1_core0_dma_memory_region>, 555 <&main_r5fss1_core0_memory_region>; 556}; 557 558&main_r5fss1_core1 { 559 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; 560 memory-region = <&main_r5fss1_core1_dma_memory_region>, 561 <&main_r5fss1_core1_memory_region>; 562}; 563 564&serdes_ln_ctrl { 565 idle-states = <AM64_SERDES0_LANE0_PCIE0>; 566}; 567 568&serdes0 { 569 serdes0_pcie_link: phy@0 { 570 reg = <0>; 571 cdns,num-lanes = <1>; 572 #phy-cells = <0>; 573 cdns,phy-type = <PHY_TYPE_PCIE>; 574 resets = <&serdes_wiz0 1>; 575 }; 576}; 577 578&pcie0_rc { 579 status = "okay"; 580 reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; 581 phys = <&serdes0_pcie_link>; 582 phy-names = "pcie-phy"; 583 num-lanes = <1>; 584}; 585 586&pcie0_ep { 587 phys = <&serdes0_pcie_link>; 588 phy-names = "pcie-phy"; 589 num-lanes = <1>; 590}; 591 592&ecap0 { 593 status = "okay"; 594 /* PWM is available on Pin 1 of header J12 */ 595 pinctrl-names = "default"; 596 pinctrl-0 = <&main_ecap0_pins_default>; 597}; 598 599&main_mcan0 { 600 status = "okay"; 601 pinctrl-names = "default"; 602 pinctrl-0 = <&main_mcan0_pins_default>; 603 phys = <&transceiver1>; 604}; 605 606&main_mcan1 { 607 status = "okay"; 608 pinctrl-names = "default"; 609 pinctrl-0 = <&main_mcan1_pins_default>; 610 phys = <&transceiver2>; 611}; 612