1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/leds/common.h>
9#include "sm4250.dtsi"
10
11/ {
12	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
13	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
14
15	aliases {
16		serial0 = &uart4;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	clocks {
24		clk40M: can-clk {
25			compatible = "fixed-clock";
26			clock-frequency = <40000000>;
27			#clock-cells = <0>;
28		};
29	};
30
31	hdmi-connector {
32		compatible = "hdmi-connector";
33		type = "a";
34
35		port {
36			hdmi_con: endpoint {
37				remote-endpoint = <&lt9611_out>;
38			};
39		};
40	};
41
42	leds {
43		compatible = "gpio-leds";
44
45		led-bt {
46			label = "blue:bt";
47			function = LED_FUNCTION_BLUETOOTH;
48			color = <LED_COLOR_ID_BLUE>;
49			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
50			linux,default-trigger = "bluetooth-power";
51			default-state = "off";
52		};
53
54		led-user0 {
55			label = "green:user0";
56			function = LED_FUNCTION_INDICATOR;
57			color = <LED_COLOR_ID_GREEN>;
58			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
59			linux,default-trigger = "none";
60			default-state = "off";
61			panic-indicator;
62		};
63
64		led-wlan {
65			label = "yellow:wlan";
66			function = LED_FUNCTION_WLAN;
67			color = <LED_COLOR_ID_YELLOW>;
68			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
69			linux,default-trigger = "phy0tx";
70			default-state = "off";
71		};
72	};
73
74	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
75		compatible = "regulator-fixed";
76		regulator-name = "VREG_HDMI_OUT_1P2";
77		regulator-min-microvolt = <1200000>;
78		regulator-max-microvolt = <1200000>;
79		vin-supply = <&vdc_1v2>;
80		regulator-always-on;
81		regulator-boot-on;
82	};
83
84	lt9611_3v3: regulator-lt9611-3v3 {
85		compatible = "regulator-fixed";
86		regulator-name = "LT9611_3V3";
87		regulator-min-microvolt = <3300000>;
88		regulator-max-microvolt = <3300000>;
89		vin-supply = <&vdc_3v3>;
90		regulator-always-on;
91		regulator-boot-on;
92	};
93
94	/* Main barrel jack input */
95	vdc_12v: regulator-vdc-12v {
96		compatible = "regulator-fixed";
97		regulator-name = "DC_12V";
98		regulator-min-microvolt = <12000000>;
99		regulator-max-microvolt = <12000000>;
100		regulator-always-on;
101		regulator-boot-on;
102	};
103
104	/* 1.2V supply stepped down from the barrel jack input */
105	vdc_1v2: regulator-vdc-1v2 {
106		compatible = "regulator-fixed";
107		regulator-name = "VDC_1V2";
108		regulator-min-microvolt = <1200000>;
109		regulator-max-microvolt = <1200000>;
110		vin-supply = <&vdc_12v>;
111		regulator-always-on;
112		regulator-boot-on;
113	};
114
115	/* 3.3V supply stepped down from the barrel jack input */
116	vdc_3v3: regulator-vdc-3v3 {
117		compatible = "regulator-fixed";
118		regulator-name = "VDC_3V3";
119		regulator-min-microvolt = <3300000>;
120		regulator-max-microvolt = <3300000>;
121		vin-supply = <&vdc_12v>;
122		regulator-always-on;
123		regulator-boot-on;
124	};
125
126	/* 5V supply stepped down from the barrel jack input */
127	vdc_5v: regulator-vdc-5v {
128		compatible = "regulator-fixed";
129		regulator-name = "VDC_5V";
130
131		regulator-min-microvolt = <5000000>;
132		regulator-max-microvolt = <5000000>;
133		regulator-always-on;
134		regulator-boot-on;
135	};
136
137	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
138	vdc_vbat_som: regulator-vdc-vbat {
139		compatible = "regulator-fixed";
140		regulator-name = "VBAT_SOM";
141		regulator-min-microvolt = <4200000>;
142		regulator-max-microvolt = <4200000>;
143		regulator-always-on;
144		regulator-boot-on;
145	};
146
147	/* PMI632 charger out, supplied by VBAT */
148	vph_pwr: regulator-vph-pwr {
149		compatible = "regulator-fixed";
150		regulator-name = "vph_pwr";
151		regulator-min-microvolt = <3700000>;
152		regulator-max-microvolt = <3700000>;
153		vin-supply = <&vdc_vbat_som>;
154
155		regulator-always-on;
156		regulator-boot-on;
157	};
158};
159
160&gpi_dma0 {
161	status = "okay";
162};
163
164&i2c2 {
165	clock-frequency = <400000>;
166	status = "okay";
167
168	lt9611_codec: hdmi-bridge@2b {
169		compatible = "lontium,lt9611uxc";
170		reg = <0x2b>;
171		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
172		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
173
174		vdd-supply = <&vreg_hdmi_out_1p2>;
175		vcc-supply = <&lt9611_3v3>;
176
177		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
178		pinctrl-names = "default";
179		#sound-dai-cells = <1>;
180
181		ports {
182			#address-cells = <1>;
183			#size-cells = <0>;
184
185			port@0 {
186				reg = <0>;
187
188				lt9611_a: endpoint {
189					remote-endpoint = <&mdss_dsi0_out>;
190				};
191			};
192
193			port@2 {
194				reg = <2>;
195
196				lt9611_out: endpoint {
197					remote-endpoint = <&hdmi_con>;
198				};
199			};
200		};
201	};
202};
203
204&mdss {
205	status = "okay";
206};
207
208&mdss_dsi0 {
209	vdda-supply = <&vreg_l18a_1p232>;
210	status = "okay";
211};
212
213&mdss_dsi0_out {
214	remote-endpoint = <&lt9611_a>;
215	data-lanes = <0 1 2 3>;
216};
217
218&mdss_dsi0_phy {
219	status = "okay";
220};
221
222&qupv3_id_0 {
223	status = "okay";
224};
225
226&rpm_requests {
227	regulators {
228		compatible = "qcom,rpm-pm6125-regulators";
229
230		vdd-s1-supply = <&vph_pwr>;
231		vdd-s2-supply = <&vph_pwr>;
232		vdd-s3-supply = <&vph_pwr>;
233		vdd-s4-supply = <&vph_pwr>;
234		vdd-s5-supply = <&vph_pwr>;
235		vdd-s6-supply = <&vph_pwr>;
236		vdd-s7-supply = <&vph_pwr>;
237		vdd-s8-supply = <&vph_pwr>;
238		vdd-s9-supply = <&vph_pwr>;
239		vdd-s10-supply = <&vph_pwr>;
240
241		vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
242		vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
243		vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
244		vdd-l6-l8-supply = <&vreg_s5a_0p848>;
245		vdd-l9-l11-supply = <&vreg_s7a_2p04>;
246		vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
247		vdd-l12-l16-supply = <&vreg_s7a_2p04>;
248		vdd-l23-l24-supply = <&vph_pwr>;
249
250		vreg_s5a_0p848: s5 {
251			regulator-min-microvolt = <920000>;
252			regulator-max-microvolt = <1128000>;
253		};
254
255		vreg_s6a_1p352: s6 {
256			regulator-min-microvolt = <304000>;
257			regulator-max-microvolt = <1456000>;
258		};
259
260		vreg_s7a_2p04: s7 {
261			regulator-min-microvolt = <1280000>;
262			regulator-max-microvolt = <2080000>;
263		};
264
265		vreg_l1a_1p0: l1 {
266			regulator-min-microvolt = <952000>;
267			regulator-max-microvolt = <1152000>;
268		};
269
270		vreg_l4a_0p9: l4 {
271			regulator-min-microvolt = <488000>;
272			regulator-max-microvolt = <1000000>;
273		};
274
275		vreg_l5a_2p96: l5 {
276			regulator-min-microvolt = <1648000>;
277			regulator-max-microvolt = <3056000>;
278			regulator-allow-set-load;
279		};
280
281		vreg_l6a_0p6: l6 {
282			regulator-min-microvolt = <576000>;
283			regulator-max-microvolt = <656000>;
284		};
285
286		vreg_l7a_1p256: l7 {
287			regulator-min-microvolt = <1200000>;
288			regulator-max-microvolt = <1304000>;
289		};
290
291		vreg_l8a_0p664: l8 {
292			regulator-min-microvolt = <400000>;
293			regulator-max-microvolt = <728000>;
294		};
295
296		vreg_l9a_1p8: l9 {
297			regulator-min-microvolt = <1800000>;
298			regulator-max-microvolt = <2000000>;
299		};
300
301		vreg_l10a_1p8: l10 {
302			regulator-min-microvolt = <1704000>;
303			regulator-max-microvolt = <1904000>;
304		};
305
306		vreg_l11a_1p8: l11 {
307			regulator-min-microvolt = <1704000>;
308			regulator-max-microvolt = <1952000>;
309			regulator-allow-set-load;
310		};
311
312		vreg_l12a_1p8: l12 {
313			regulator-min-microvolt = <1624000>;
314			regulator-max-microvolt = <1984000>;
315		};
316
317		vreg_l13a_1p8: l13 {
318			regulator-min-microvolt = <1504000>;
319			regulator-max-microvolt = <1952000>;
320		};
321
322		vreg_l14a_1p8: l14 {
323			regulator-min-microvolt = <1704000>;
324			regulator-max-microvolt = <1904000>;
325		};
326
327		vreg_l15a_3p128: l15 {
328			regulator-min-microvolt = <2920000>;
329			regulator-max-microvolt = <3232000>;
330		};
331
332		vreg_l16a_1p3: l16 {
333			regulator-min-microvolt = <1704000>;
334			regulator-max-microvolt = <1904000>;
335		};
336
337		vreg_l17a_1p3: l17 {
338			regulator-min-microvolt = <1152000>;
339			regulator-max-microvolt = <1384000>;
340		};
341
342		vreg_l18a_1p232: l18 {
343			regulator-min-microvolt = <1104000>;
344			regulator-max-microvolt = <1312000>;
345		};
346
347		vreg_l19a_1p8: l19 {
348			regulator-min-microvolt = <1624000>;
349			regulator-max-microvolt = <3304000>;
350		};
351
352		vreg_l20a_1p8: l20 {
353			regulator-min-microvolt = <1624000>;
354			regulator-max-microvolt = <3304000>;
355		};
356
357		vreg_l21a_2p704: l21 {
358			regulator-min-microvolt = <2400000>;
359			regulator-max-microvolt = <3600000>;
360		};
361
362		vreg_l22a_2p96: l22 {
363			regulator-min-microvolt = <2952000>;
364			regulator-max-microvolt = <3304000>;
365			regulator-system-load = <100000>;
366			regulator-allow-set-load;
367		};
368
369		vreg_l23a_3p3: l23 {
370			regulator-min-microvolt = <3200000>;
371			regulator-max-microvolt = <3400000>;
372		};
373
374		vreg_l24a_2p96: l24 {
375			regulator-min-microvolt = <2704000>;
376			regulator-max-microvolt = <3600000>;
377			regulator-system-load = <100000>;
378			regulator-allow-set-load;
379		};
380	};
381};
382
383&sdhc_1 {
384	vmmc-supply = <&vreg_l24a_2p96>;
385	vqmmc-supply = <&vreg_l11a_1p8>;
386	no-sdio;
387	non-removable;
388
389	status = "okay";
390};
391
392&sdhc_2 {
393	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
394	vmmc-supply = <&vreg_l22a_2p96>;
395	vqmmc-supply = <&vreg_l5a_2p96>;
396	no-sdio;
397
398	status = "okay";
399};
400
401&spi5 {
402	status = "okay";
403
404	can@0 {
405		compatible = "microchip,mcp2518fd";
406		reg = <0>;
407		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
408		clocks = <&clk40M>;
409		spi-max-frequency = <10000000>;
410		vdd-supply = <&vdc_5v>;
411		xceiver-supply = <&vdc_5v>;
412	};
413};
414
415&sleep_clk {
416	clock-frequency = <32000>;
417};
418
419&tlmm {
420	gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
421			       <56 3>, <61 2>, <64 1>,
422			       <68 1>, <72 8>, <96 1>;
423
424	lt9611_rst_pin: lt9611-rst-state {
425		pins = "gpio41";
426		function = "gpio";
427		input-disable;
428		output-high;
429	};
430
431	lt9611_irq_pin: lt9611-irq-state {
432		pins = "gpio46";
433		function = "gpio";
434		bias-disable;
435	};
436};
437
438&uart4 {
439	status = "okay";
440};
441
442&xo_board {
443	clock-frequency = <19200000>;
444};
445