1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/input/linux-event-codes.h>
5#include <dt-bindings/input/gpio-keys.h>
6
7#include "tegra186-p3310.dtsi"
8
9/ {
10	model = "NVIDIA Jetson TX2 Developer Kit";
11	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
12
13	aconnect {
14		status = "okay";
15
16		dma-controller@2930000 {
17			status = "okay";
18		};
19
20		interrupt-controller@2a40000 {
21			status = "okay";
22		};
23	};
24
25	i2c@3160000 {
26		power-monitor@42 {
27			compatible = "ti,ina3221";
28			reg = <0x42>;
29			#address-cells = <1>;
30			#size-cells = <0>;
31
32			channel@0 {
33				reg = <0x0>;
34				label = "VDD_MUX";
35				shunt-resistor-micro-ohms = <20000>;
36			};
37
38			channel@1 {
39				reg = <0x1>;
40				label = "VDD_5V0_IO_SYS";
41				shunt-resistor-micro-ohms = <5000>;
42			};
43
44			channel@2 {
45				reg = <0x2>;
46				label = "VDD_3V3_SYS";
47				shunt-resistor-micro-ohms = <10000>;
48			};
49		};
50
51		power-monitor@43 {
52			compatible = "ti,ina3221";
53			reg = <0x43>;
54			#address-cells = <1>;
55			#size-cells = <0>;
56
57			channel@0 {
58				reg = <0x0>;
59				label = "VDD_3V3_IO_SLP";
60				shunt-resistor-micro-ohms = <10000>;
61			};
62
63			channel@1 {
64				reg = <0x1>;
65				label = "VDD_1V8_IO";
66				shunt-resistor-micro-ohms = <10000>;
67			};
68
69			channel@2 {
70				reg = <0x2>;
71				label = "VDD_M2_IN";
72				shunt-resistor-micro-ohms = <10000>;
73			};
74		};
75
76		exp1: gpio@74 {
77			compatible = "ti,tca9539";
78			reg = <0x74>;
79
80			interrupt-parent = <&gpio>;
81			interrupts = <TEGRA186_MAIN_GPIO(Y, 0)
82				      GPIO_ACTIVE_LOW>;
83
84			#gpio-cells = <2>;
85			gpio-controller;
86
87			vcc-supply = <&vdd_3v3_sys>;
88		};
89
90		exp2: gpio@77 {
91			compatible = "ti,tca9539";
92			reg = <0x77>;
93
94			interrupt-parent = <&gpio>;
95			interrupts = <TEGRA186_MAIN_GPIO(Y, 6)
96				      GPIO_ACTIVE_LOW>;
97
98			#gpio-cells = <2>;
99			gpio-controller;
100
101			vcc-supply = <&vdd_1v8>;
102		};
103	};
104
105	/* SDMMC1 (SD/MMC) */
106	sdhci@3400000 {
107		status = "okay";
108
109		vmmc-supply = <&vdd_sd>;
110	};
111
112	hda@3510000 {
113		nvidia,model = "jetson-tx2-hda";
114		status = "okay";
115	};
116
117	padctl@3520000 {
118		status = "okay";
119
120		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
121		avdd-usb-supply = <&vdd_3v3_sys>;
122		dvdd-pex-supply = <&vdd_pex>;
123		dvdd-pex-pll-supply = <&vdd_pex>;
124		hvdd-pex-supply = <&vdd_1v8>;
125		hvdd-pex-pll-supply = <&vdd_1v8>;
126		vclamp-usb-supply = <&vdd_1v8>;
127		vddio-hsic-supply = <&gnd>;
128
129		pads {
130			usb2 {
131				status = "okay";
132
133				lanes {
134					micro_b: usb2-0 {
135						nvidia,function = "xusb";
136						status = "okay";
137					};
138
139					usb2-1 {
140						nvidia,function = "xusb";
141						status = "okay";
142					};
143
144					usb2-2 {
145						nvidia,function = "xusb";
146						status = "okay";
147					};
148				};
149			};
150
151			usb3 {
152				status = "okay";
153
154				lanes {
155					usb3-0 {
156						nvidia,function = "xusb";
157						status = "okay";
158					};
159
160					usb3-1 {
161						nvidia,function = "xusb";
162						status = "okay";
163					};
164
165					usb3-2 {
166						nvidia,function = "xusb";
167						status = "okay";
168					};
169				};
170			};
171		};
172
173		ports {
174			usb2-0 {
175				status = "okay";
176				mode = "otg";
177				vbus-supply = <&vdd_usb0>;
178
179				usb-role-switch;
180				connector {
181					compatible = "usb-b-connector",
182						     "gpio-usb-b-connector";
183					label = "micro-USB";
184					type = "micro";
185					vbus-gpio = <&gpio
186						     TEGRA186_MAIN_GPIO(X, 7)
187						     GPIO_ACTIVE_LOW>;
188					id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
189				};
190
191			};
192
193			usb2-1 {
194				status = "okay";
195				mode = "host";
196
197				vbus-supply = <&vdd_usb1>;
198			};
199
200			usb3-0 {
201				nvidia,usb2-companion = <1>;
202				status = "okay";
203			};
204		};
205	};
206
207	usb@3530000 {
208		status = "okay";
209
210		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
211		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
212		       <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
213		phy-names = "usb2-0", "usb2-1", "usb3-0";
214	};
215
216	usb@3550000 {
217		status = "okay";
218
219		phys = <&micro_b>;
220		phy-names = "usb2-0";
221	};
222
223	i2c@c250000 {
224		/* carrier board ID EEPROM */
225		eeprom@57 {
226			compatible = "atmel,24c02";
227			reg = <0x57>;
228
229			vcc-supply = <&vdd_1v8>;
230			address-bits = <8>;
231			page-size = <8>;
232			size = <256>;
233			read-only;
234		};
235	};
236
237	pcie@10003000 {
238		status = "okay";
239
240		dvdd-pex-supply = <&vdd_pex>;
241		hvdd-pex-pll-supply = <&vdd_1v8>;
242		hvdd-pex-supply = <&vdd_1v8>;
243		vddio-pexctl-aud-supply = <&vdd_1v8>;
244
245		pci@1,0 {
246			nvidia,num-lanes = <4>;
247			status = "okay";
248		};
249
250		pci@2,0 {
251			nvidia,num-lanes = <0>;
252			status = "disabled";
253		};
254
255		pci@3,0 {
256			nvidia,num-lanes = <1>;
257			status = "disabled";
258		};
259	};
260
261	host1x@13e00000 {
262		status = "okay";
263
264		dpaux@15040000 {
265			status = "okay";
266		};
267
268		display-hub@15200000 {
269			status = "okay";
270		};
271
272		dsi@15300000 {
273			status = "disabled";
274		};
275
276		/* DP on E3320 */
277		sor@15540000 {
278			status = "okay";
279
280			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
281			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
282
283			nvidia,dpaux = <&dpaux>;
284		};
285
286		sor@15580000 {
287			status = "okay";
288
289			avdd-io-supply = <&vdd_hdmi_1v05>;
290			vdd-pll-supply = <&vdd_1v8_ap>;
291			hdmi-supply = <&vdd_hdmi>;
292
293			nvidia,ddc-i2c-bus = <&ddc>;
294			nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
295						 GPIO_ACTIVE_LOW>;
296		};
297
298		dpaux@155c0000 {
299			status = "okay";
300		};
301	};
302
303	gpio-keys {
304		compatible = "gpio-keys";
305
306		power {
307			label = "Power";
308			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
309					   GPIO_ACTIVE_LOW>;
310			linux,input-type = <EV_KEY>;
311			linux,code = <KEY_POWER>;
312			debounce-interval = <10>;
313			wakeup-event-action = <EV_ACT_ASSERTED>;
314			wakeup-source;
315		};
316
317		volume-up {
318			label = "Volume Up";
319			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
320					   GPIO_ACTIVE_LOW>;
321			linux,input-type = <EV_KEY>;
322			linux,code = <KEY_VOLUMEUP>;
323			debounce-interval = <10>;
324		};
325
326		volume-down {
327			label = "Volume Down";
328			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
329					   GPIO_ACTIVE_LOW>;
330			linux,input-type = <EV_KEY>;
331			linux,code = <KEY_VOLUMEDOWN>;
332			debounce-interval = <10>;
333		};
334	};
335
336	regulators {
337		vdd_sd: regulator@100 {
338			compatible = "regulator-fixed";
339			reg = <100>;
340
341			regulator-name = "SD_CARD_SW_PWR";
342			regulator-min-microvolt = <3300000>;
343			regulator-max-microvolt = <3300000>;
344
345			gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6)
346				      GPIO_ACTIVE_HIGH>;
347			enable-active-high;
348
349			vin-supply = <&vdd_3v3_sys>;
350		};
351
352		vdd_hdmi: regulator@101 {
353			compatible = "regulator-fixed";
354			reg = <101>;
355
356			regulator-name = "VDD_HDMI_5V0";
357			regulator-min-microvolt = <5000000>;
358			regulator-max-microvolt = <5000000>;
359
360			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
361			enable-active-high;
362
363			vin-supply = <&vdd_5v0_sys>;
364		};
365
366		vdd_usb0: regulator@102 {
367			compatible = "regulator-fixed";
368			reg = <102>;
369
370			regulator-name = "VDD_USB0";
371			regulator-min-microvolt = <5000000>;
372			regulator-max-microvolt = <5000000>;
373
374			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
375			enable-active-high;
376
377			vin-supply = <&vdd_5v0_sys>;
378		};
379
380		vdd_usb1: regulator@103 {
381			compatible = "regulator-fixed";
382			reg = <103>;
383
384			regulator-name = "VDD_USB1";
385			regulator-min-microvolt = <5000000>;
386			regulator-max-microvolt = <5000000>;
387
388			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
389			enable-active-high;
390
391			vin-supply = <&vdd_5v0_sys>;
392		};
393	};
394};
395