1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
5 */
6
7#include "meson-gx.dtsi"
8#include <dt-bindings/clock/gxbb-clkc.h>
9#include <dt-bindings/clock/gxbb-aoclkc.h>
10#include <dt-bindings/gpio/meson-gxl-gpio.h>
11#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
12
13/ {
14	compatible = "amlogic,meson-gxl";
15
16	soc {
17		usb0: usb@c9000000 {
18			status = "disabled";
19			compatible = "amlogic,meson-gxl-dwc3";
20			#address-cells = <2>;
21			#size-cells = <2>;
22			ranges;
23
24			clocks = <&clkc CLKID_USB>;
25			clock-names = "usb_general";
26			resets = <&reset RESET_USB_OTG>;
27			reset-names = "usb_otg";
28
29			dwc3: dwc3@c9000000 {
30				compatible = "snps,dwc3";
31				reg = <0x0 0xc9000000 0x0 0x100000>;
32				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
33				dr_mode = "host";
34				maximum-speed = "high-speed";
35				snps,dis_u2_susphy_quirk;
36				phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
37			};
38		};
39
40		crypto: crypto@c883e000 {
41			compatible = "amlogic,gxl-crypto";
42			reg = <0x0 0xc883e000 0x0 0x36>;
43			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
44				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
45			clocks = <&clkc CLKID_BLKMV>;
46			clock-names = "blkmv";
47			status = "okay";
48		};
49	};
50};
51
52&apb {
53	usb2_phy0: phy@78000 {
54		compatible = "amlogic,meson-gxl-usb2-phy";
55		#phy-cells = <0>;
56		reg = <0x0 0x78000 0x0 0x20>;
57		clocks = <&clkc CLKID_USB>;
58		clock-names = "phy";
59		resets = <&reset RESET_USB_OTG>;
60		reset-names = "phy";
61		status = "okay";
62	};
63
64	usb2_phy1: phy@78020 {
65		compatible = "amlogic,meson-gxl-usb2-phy";
66		#phy-cells = <0>;
67		reg = <0x0 0x78020 0x0 0x20>;
68		clocks = <&clkc CLKID_USB>;
69		clock-names = "phy";
70		resets = <&reset RESET_USB_OTG>;
71		reset-names = "phy";
72		status = "okay";
73	};
74
75	usb3_phy: phy@78080 {
76		compatible = "amlogic,meson-gxl-usb3-phy";
77		#phy-cells = <0>;
78		reg = <0x0 0x78080 0x0 0x20>;
79		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
80		clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>;
81		clock-names = "phy", "peripheral";
82		resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
83		reset-names = "phy", "peripheral";
84		status = "okay";
85	};
86};
87
88&efuse {
89	clocks = <&clkc CLKID_EFUSE>;
90};
91
92&ethmac {
93	clocks = <&clkc CLKID_ETH>,
94		 <&clkc CLKID_FCLK_DIV2>,
95		 <&clkc CLKID_MPLL2>;
96	clock-names = "stmmaceth", "clkin0", "clkin1";
97
98	mdio0: mdio {
99		#address-cells = <1>;
100		#size-cells = <0>;
101		compatible = "snps,dwmac-mdio";
102	};
103};
104
105&aobus {
106	pinctrl_aobus: pinctrl@14 {
107		compatible = "amlogic,meson-gxl-aobus-pinctrl";
108		#address-cells = <2>;
109		#size-cells = <2>;
110		ranges;
111
112		gpio_ao: bank@14 {
113			reg = <0x0 0x00014 0x0 0x8>,
114			      <0x0 0x0002c 0x0 0x4>,
115			      <0x0 0x00024 0x0 0x8>;
116			reg-names = "mux", "pull", "gpio";
117			gpio-controller;
118			#gpio-cells = <2>;
119			gpio-ranges = <&pinctrl_aobus 0 0 14>;
120		};
121
122		uart_ao_a_pins: uart_ao_a {
123			mux {
124				groups = "uart_tx_ao_a", "uart_rx_ao_a";
125				function = "uart_ao";
126				bias-disable;
127			};
128		};
129
130		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
131			mux {
132				groups = "uart_cts_ao_a",
133				       "uart_rts_ao_a";
134				function = "uart_ao";
135				bias-disable;
136			};
137		};
138
139		uart_ao_b_pins: uart_ao_b {
140			mux {
141				groups = "uart_tx_ao_b", "uart_rx_ao_b";
142				function = "uart_ao_b";
143				bias-disable;
144			};
145		};
146
147		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
148			mux {
149				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
150				function = "uart_ao_b";
151				bias-disable;
152			};
153		};
154
155		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
156			mux {
157				groups = "uart_cts_ao_b",
158				       "uart_rts_ao_b";
159				function = "uart_ao_b";
160				bias-disable;
161			};
162		};
163
164		remote_input_ao_pins: remote_input_ao {
165			mux {
166				groups = "remote_input_ao";
167				function = "remote_input_ao";
168				bias-disable;
169			};
170		};
171
172		i2c_ao_pins: i2c_ao {
173			mux {
174				groups = "i2c_sck_ao",
175				       "i2c_sda_ao";
176				function = "i2c_ao";
177				bias-disable;
178			};
179		};
180
181		pwm_ao_a_3_pins: pwm_ao_a_3 {
182			mux {
183				groups = "pwm_ao_a_3";
184				function = "pwm_ao_a";
185				bias-disable;
186			};
187		};
188
189		pwm_ao_a_8_pins: pwm_ao_a_8 {
190			mux {
191				groups = "pwm_ao_a_8";
192				function = "pwm_ao_a";
193				bias-disable;
194			};
195		};
196
197		pwm_ao_b_pins: pwm_ao_b {
198			mux {
199				groups = "pwm_ao_b";
200				function = "pwm_ao_b";
201				bias-disable;
202			};
203		};
204
205		pwm_ao_b_6_pins: pwm_ao_b_6 {
206			mux {
207				groups = "pwm_ao_b_6";
208				function = "pwm_ao_b";
209				bias-disable;
210			};
211		};
212
213		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
214			mux {
215				groups = "i2s_out_ch23_ao";
216				function = "i2s_out_ao";
217				bias-disable;
218			};
219		};
220
221		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
222			mux {
223				groups = "i2s_out_ch45_ao";
224				function = "i2s_out_ao";
225				bias-disable;
226			};
227		};
228
229		spdif_out_ao_6_pins: spdif_out_ao_6 {
230			mux {
231				groups = "spdif_out_ao_6";
232				function = "spdif_out_ao";
233				bias-disable;
234			};
235		};
236
237		spdif_out_ao_9_pins: spdif_out_ao_9 {
238			mux {
239				groups = "spdif_out_ao_9";
240				function = "spdif_out_ao";
241				bias-disable;
242			};
243		};
244
245		ao_cec_pins: ao_cec {
246			mux {
247				groups = "ao_cec";
248				function = "cec_ao";
249				bias-disable;
250			};
251		};
252
253		ee_cec_pins: ee_cec {
254			mux {
255				groups = "ee_cec";
256				function = "cec_ao";
257				bias-disable;
258			};
259		};
260	};
261};
262
263&cec_AO {
264	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
265	clock-names = "core";
266};
267
268&clkc_AO {
269	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
270	clocks = <&xtal>, <&clkc CLKID_CLK81>;
271	clock-names = "xtal", "mpeg-clk";
272};
273
274&gpio_intc {
275	compatible = "amlogic,meson-gpio-intc",
276		     "amlogic,meson-gxl-gpio-intc";
277	status = "okay";
278};
279
280&hdmi_tx {
281	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
282	resets = <&reset RESET_HDMITX_CAPB3>,
283		 <&reset RESET_HDMI_SYSTEM_RESET>,
284		 <&reset RESET_HDMI_TX>;
285	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
286	clocks = <&clkc CLKID_HDMI_PCLK>,
287		 <&clkc CLKID_CLK81>,
288		 <&clkc CLKID_GCLK_VENCI_INT0>;
289	clock-names = "isfr", "iahb", "venci";
290};
291
292&sysctrl {
293	clkc: clock-controller {
294		compatible = "amlogic,gxl-clkc";
295		#clock-cells = <1>;
296		clocks = <&xtal>;
297		clock-names = "xtal";
298	};
299};
300
301&i2c_A {
302	clocks = <&clkc CLKID_I2C>;
303};
304
305&i2c_AO {
306	clocks = <&clkc CLKID_AO_I2C>;
307};
308
309&i2c_B {
310	clocks = <&clkc CLKID_I2C>;
311};
312
313&i2c_C {
314	clocks = <&clkc CLKID_I2C>;
315};
316
317&periphs {
318	pinctrl_periphs: pinctrl@4b0 {
319		compatible = "amlogic,meson-gxl-periphs-pinctrl";
320		#address-cells = <2>;
321		#size-cells = <2>;
322		ranges;
323
324		gpio: bank@4b0 {
325			reg = <0x0 0x004b0 0x0 0x28>,
326			      <0x0 0x004e8 0x0 0x14>,
327			      <0x0 0x00520 0x0 0x14>,
328			      <0x0 0x00430 0x0 0x40>;
329			reg-names = "mux", "pull", "pull-enable", "gpio";
330			gpio-controller;
331			#gpio-cells = <2>;
332			gpio-ranges = <&pinctrl_periphs 0 0 100>;
333		};
334
335		emmc_pins: emmc {
336			mux-0 {
337				groups = "emmc_nand_d07",
338				       "emmc_cmd";
339				function = "emmc";
340				bias-pull-up;
341			};
342
343			mux-1 {
344				groups = "emmc_clk";
345				function = "emmc";
346				bias-disable;
347			};
348		};
349
350		emmc_ds_pins: emmc-ds {
351			mux {
352				groups = "emmc_ds";
353				function = "emmc";
354				bias-pull-down;
355			};
356		};
357
358		emmc_clk_gate_pins: emmc_clk_gate {
359			mux {
360				groups = "BOOT_8";
361				function = "gpio_periphs";
362				bias-pull-down;
363			};
364		};
365
366		nor_pins: nor {
367			mux {
368				groups = "nor_d",
369				       "nor_q",
370				       "nor_c",
371				       "nor_cs";
372				function = "nor";
373				bias-disable;
374			};
375		};
376
377		spi_pins: spi-pins {
378			mux {
379				groups = "spi_miso",
380					"spi_mosi",
381					"spi_sclk";
382				function = "spi";
383				bias-disable;
384			};
385		};
386
387		spi_ss0_pins: spi-ss0 {
388			mux {
389				groups = "spi_ss0";
390				function = "spi";
391				bias-disable;
392			};
393		};
394
395		sdcard_pins: sdcard {
396			mux-0 {
397				groups = "sdcard_d0",
398				       "sdcard_d1",
399				       "sdcard_d2",
400				       "sdcard_d3",
401				       "sdcard_cmd";
402				function = "sdcard";
403				bias-pull-up;
404			};
405
406			mux-1 {
407				groups = "sdcard_clk";
408				function = "sdcard";
409				bias-disable;
410			};
411		};
412
413		sdcard_clk_gate_pins: sdcard_clk_gate {
414			mux {
415				groups = "CARD_2";
416				function = "gpio_periphs";
417				bias-pull-down;
418			};
419		};
420
421		sdio_pins: sdio {
422			mux-0 {
423				groups = "sdio_d0",
424				       "sdio_d1",
425				       "sdio_d2",
426				       "sdio_d3",
427				       "sdio_cmd";
428				function = "sdio";
429				bias-pull-up;
430			};
431
432			mux-1 {
433				groups = "sdio_clk";
434				function = "sdio";
435				bias-disable;
436			};
437		};
438
439		sdio_clk_gate_pins: sdio_clk_gate {
440			mux {
441				groups = "GPIOX_4";
442				function = "gpio_periphs";
443				bias-pull-down;
444			};
445		};
446
447		sdio_irq_pins: sdio_irq {
448			mux {
449				groups = "sdio_irq";
450				function = "sdio";
451				bias-disable;
452			};
453		};
454
455		uart_a_pins: uart_a {
456			mux {
457				groups = "uart_tx_a",
458				       "uart_rx_a";
459				function = "uart_a";
460				bias-disable;
461			};
462		};
463
464		uart_a_cts_rts_pins: uart_a_cts_rts {
465			mux {
466				groups = "uart_cts_a",
467				       "uart_rts_a";
468				function = "uart_a";
469				bias-disable;
470			};
471		};
472
473		uart_b_pins: uart_b {
474			mux {
475				groups = "uart_tx_b",
476				       "uart_rx_b";
477				function = "uart_b";
478				bias-disable;
479			};
480		};
481
482		uart_b_cts_rts_pins: uart_b_cts_rts {
483			mux {
484				groups = "uart_cts_b",
485				       "uart_rts_b";
486				function = "uart_b";
487				bias-disable;
488			};
489		};
490
491		uart_c_pins: uart_c {
492			mux {
493				groups = "uart_tx_c",
494				       "uart_rx_c";
495				function = "uart_c";
496				bias-disable;
497			};
498		};
499
500		uart_c_cts_rts_pins: uart_c_cts_rts {
501			mux {
502				groups = "uart_cts_c",
503				       "uart_rts_c";
504				function = "uart_c";
505				bias-disable;
506			};
507		};
508
509		i2c_a_pins: i2c_a {
510			mux {
511				groups = "i2c_sck_a",
512				     "i2c_sda_a";
513				function = "i2c_a";
514				bias-disable;
515			};
516		};
517
518		i2c_b_pins: i2c_b {
519			mux {
520				groups = "i2c_sck_b",
521				      "i2c_sda_b";
522				function = "i2c_b";
523				bias-disable;
524			};
525		};
526
527		i2c_c_pins: i2c_c {
528			mux {
529				groups = "i2c_sck_c",
530				      "i2c_sda_c";
531				function = "i2c_c";
532				bias-disable;
533			};
534		};
535
536		eth_pins: eth_c {
537			mux {
538				groups = "eth_mdio",
539				       "eth_mdc",
540				       "eth_clk_rx_clk",
541				       "eth_rx_dv",
542				       "eth_rxd0",
543				       "eth_rxd1",
544				       "eth_rxd2",
545				       "eth_rxd3",
546				       "eth_rgmii_tx_clk",
547				       "eth_tx_en",
548				       "eth_txd0",
549				       "eth_txd1",
550				       "eth_txd2",
551				       "eth_txd3";
552				function = "eth";
553				bias-disable;
554			};
555		};
556
557		eth_link_led_pins: eth_link_led {
558			mux {
559				groups = "eth_link_led";
560				function = "eth_led";
561				bias-disable;
562			};
563		};
564
565		eth_act_led_pins: eth_act_led {
566			mux {
567				groups = "eth_act_led";
568				function = "eth_led";
569			};
570		};
571
572		pwm_a_pins: pwm_a {
573			mux {
574				groups = "pwm_a";
575				function = "pwm_a";
576				bias-disable;
577			};
578		};
579
580		pwm_b_pins: pwm_b {
581			mux {
582				groups = "pwm_b";
583				function = "pwm_b";
584				bias-disable;
585			};
586		};
587
588		pwm_c_pins: pwm_c {
589			mux {
590				groups = "pwm_c";
591				function = "pwm_c";
592				bias-disable;
593			};
594		};
595
596		pwm_d_pins: pwm_d {
597			mux {
598				groups = "pwm_d";
599				function = "pwm_d";
600				bias-disable;
601			};
602		};
603
604		pwm_e_pins: pwm_e {
605			mux {
606				groups = "pwm_e";
607				function = "pwm_e";
608				bias-disable;
609			};
610		};
611
612		pwm_f_clk_pins: pwm_f_clk {
613			mux {
614				groups = "pwm_f_clk";
615				function = "pwm_f";
616				bias-disable;
617			};
618		};
619
620		pwm_f_x_pins: pwm_f_x {
621			mux {
622				groups = "pwm_f_x";
623				function = "pwm_f";
624				bias-disable;
625			};
626		};
627
628		hdmi_hpd_pins: hdmi_hpd {
629			mux {
630				groups = "hdmi_hpd";
631				function = "hdmi_hpd";
632				bias-disable;
633			};
634		};
635
636		hdmi_i2c_pins: hdmi_i2c {
637			mux {
638				groups = "hdmi_sda", "hdmi_scl";
639				function = "hdmi_i2c";
640				bias-disable;
641			};
642		};
643
644		i2s_am_clk_pins: i2s_am_clk {
645			mux {
646				groups = "i2s_am_clk";
647				function = "i2s_out";
648				bias-disable;
649			};
650		};
651
652		i2s_out_ao_clk_pins: i2s_out_ao_clk {
653			mux {
654				groups = "i2s_out_ao_clk";
655				function = "i2s_out";
656				bias-disable;
657			};
658		};
659
660		i2s_out_lr_clk_pins: i2s_out_lr_clk {
661			mux {
662				groups = "i2s_out_lr_clk";
663				function = "i2s_out";
664				bias-disable;
665			};
666		};
667
668		i2s_out_ch01_pins: i2s_out_ch01 {
669			mux {
670				groups = "i2s_out_ch01";
671				function = "i2s_out";
672				bias-disable;
673			};
674		};
675		i2sout_ch23_z_pins: i2sout_ch23_z {
676			mux {
677				groups = "i2sout_ch23_z";
678				function = "i2s_out";
679				bias-disable;
680			};
681		};
682
683		i2sout_ch45_z_pins: i2sout_ch45_z {
684			mux {
685				groups = "i2sout_ch45_z";
686				function = "i2s_out";
687				bias-disable;
688			};
689		};
690
691		i2sout_ch67_z_pins: i2sout_ch67_z {
692			mux {
693				groups = "i2sout_ch67_z";
694				function = "i2s_out";
695				bias-disable;
696			};
697		};
698
699		spdif_out_h_pins: spdif_out_ao_h {
700			mux {
701				groups = "spdif_out_h";
702				function = "spdif_out";
703				bias-disable;
704			};
705		};
706	};
707
708	eth-phy-mux {
709		compatible = "mdio-mux-mmioreg", "mdio-mux";
710		#address-cells = <1>;
711		#size-cells = <0>;
712		reg = <0x0 0x55c 0x0 0x4>;
713		mux-mask = <0xffffffff>;
714		mdio-parent-bus = <&mdio0>;
715
716		internal_mdio: mdio@e40908ff {
717			reg = <0xe40908ff>;
718			#address-cells = <1>;
719			#size-cells = <0>;
720
721			internal_phy: ethernet-phy@8 {
722				compatible = "ethernet-phy-id0181.4400";
723				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
724				reg = <8>;
725				max-speed = <100>;
726			};
727		};
728
729		external_mdio: mdio@2009087f {
730			reg = <0x2009087f>;
731			#address-cells = <1>;
732			#size-cells = <0>;
733		};
734	};
735};
736
737&pwrc_vpu {
738	resets = <&reset RESET_VIU>,
739		 <&reset RESET_VENC>,
740		 <&reset RESET_VCBUS>,
741		 <&reset RESET_BT656>,
742		 <&reset RESET_DVIN_RESET>,
743		 <&reset RESET_RDMA>,
744		 <&reset RESET_VENCI>,
745		 <&reset RESET_VENCP>,
746		 <&reset RESET_VDAC>,
747		 <&reset RESET_VDI6>,
748		 <&reset RESET_VENCL>,
749		 <&reset RESET_VID_LOCK>;
750	clocks = <&clkc CLKID_VPU>,
751	         <&clkc CLKID_VAPB>;
752	clock-names = "vpu", "vapb";
753	/*
754	 * VPU clocking is provided by two identical clock paths
755	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
756	 * free mux to safely change frequency while running.
757	 * Same for VAPB but with a final gate after the glitch free mux.
758	 */
759	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
760			  <&clkc CLKID_VPU_0>,
761			  <&clkc CLKID_VPU>, /* Glitch free mux */
762			  <&clkc CLKID_VAPB_0_SEL>,
763			  <&clkc CLKID_VAPB_0>,
764			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
765	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
766				 <0>, /* Do Nothing */
767				 <&clkc CLKID_VPU_0>,
768				 <&clkc CLKID_FCLK_DIV4>,
769				 <0>, /* Do Nothing */
770				 <&clkc CLKID_VAPB_0>;
771	assigned-clock-rates = <0>, /* Do Nothing */
772			       <666666666>,
773			       <0>, /* Do Nothing */
774			       <0>, /* Do Nothing */
775			       <250000000>,
776			       <0>; /* Do Nothing */
777};
778
779&saradc {
780	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
781	clocks = <&xtal>,
782		 <&clkc CLKID_SAR_ADC>,
783		 <&clkc CLKID_SAR_ADC_CLK>,
784		 <&clkc CLKID_SAR_ADC_SEL>;
785	clock-names = "clkin", "core", "adc_clk", "adc_sel";
786};
787
788&sd_emmc_a {
789	clocks = <&clkc CLKID_SD_EMMC_A>,
790		 <&clkc CLKID_SD_EMMC_A_CLK0>,
791		 <&clkc CLKID_FCLK_DIV2>;
792	clock-names = "core", "clkin0", "clkin1";
793	resets = <&reset RESET_SD_EMMC_A>;
794};
795
796&sd_emmc_b {
797	clocks = <&clkc CLKID_SD_EMMC_B>,
798		 <&clkc CLKID_SD_EMMC_B_CLK0>,
799		 <&clkc CLKID_FCLK_DIV2>;
800	clock-names = "core", "clkin0", "clkin1";
801	resets = <&reset RESET_SD_EMMC_B>;
802};
803
804&sd_emmc_c {
805	clocks = <&clkc CLKID_SD_EMMC_C>,
806		 <&clkc CLKID_SD_EMMC_C_CLK0>,
807		 <&clkc CLKID_FCLK_DIV2>;
808	clock-names = "core", "clkin0", "clkin1";
809	resets = <&reset RESET_SD_EMMC_C>;
810};
811
812&simplefb_hdmi {
813	clocks = <&clkc CLKID_HDMI_PCLK>,
814		 <&clkc CLKID_CLK81>,
815		 <&clkc CLKID_GCLK_VENCI_INT0>;
816};
817
818&spicc {
819	clocks = <&clkc CLKID_SPICC>;
820	clock-names = "core";
821	resets = <&reset RESET_PERIPHS_SPICC>;
822	num-cs = <1>;
823};
824
825&spifc {
826	clocks = <&clkc CLKID_SPI>;
827};
828
829&uart_A {
830	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
831	clock-names = "xtal", "pclk", "baud";
832};
833
834&uart_AO {
835	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
836	clock-names = "xtal", "pclk", "baud";
837};
838
839&uart_AO_B {
840	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
841	clock-names = "xtal", "pclk", "baud";
842};
843
844&uart_B {
845	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
846	clock-names = "xtal", "pclk", "baud";
847};
848
849&uart_C {
850	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
851	clock-names = "xtal", "pclk", "baud";
852};
853
854&vpu {
855	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
856	power-domains = <&pwrc_vpu>;
857};
858
859&vdec {
860	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
861	clocks = <&clkc CLKID_DOS_PARSER>,
862		 <&clkc CLKID_DOS>,
863		 <&clkc CLKID_VDEC_1>,
864		 <&clkc CLKID_VDEC_HEVC>;
865	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
866	resets = <&reset RESET_PARSER>;
867	reset-names = "esparser";
868};
869