1/* 2 * Copyright (c) 2016 Andreas Färber 3 * 4 * Copyright (c) 2016 BayLibre, SAS. 5 * Author: Neil Armstrong <narmstrong@baylibre.com> 6 * 7 * Copyright (c) 2016 Endless Computers, Inc. 8 * Author: Carlo Caione <carlo@endlessm.com> 9 * 10 * This file is dual-licensed: you can use it either under the terms 11 * of the GPL or the X11 license, at your option. Note that this dual 12 * licensing only applies to this file, and not this project as a 13 * whole. 14 * 15 * a) This library is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of the 18 * License, or (at your option) any later version. 19 * 20 * This library is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * Or, alternatively, 26 * 27 * b) Permission is hereby granted, free of charge, to any person 28 * obtaining a copy of this software and associated documentation 29 * files (the "Software"), to deal in the Software without 30 * restriction, including without limitation the rights to use, 31 * copy, modify, merge, publish, distribute, sublicense, and/or 32 * sell copies of the Software, and to permit persons to whom the 33 * Software is furnished to do so, subject to the following 34 * conditions: 35 * 36 * The above copyright notice and this permission notice shall be 37 * included in all copies or substantial portions of the Software. 38 * 39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 46 * OTHER DEALINGS IN THE SOFTWARE. 47 */ 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51#include <dt-bindings/interrupt-controller/arm-gic.h> 52 53/ { 54 interrupt-parent = <&gic>; 55 #address-cells = <2>; 56 #size-cells = <2>; 57 58 reserved-memory { 59 #address-cells = <2>; 60 #size-cells = <2>; 61 ranges; 62 63 /* 16 MiB reserved for Hardware ROM Firmware */ 64 hwrom_reserved: hwrom@0 { 65 reg = <0x0 0x0 0x0 0x1000000>; 66 no-map; 67 }; 68 69 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ 70 secmon_reserved: secmon@10000000 { 71 reg = <0x0 0x10000000 0x0 0x200000>; 72 no-map; 73 }; 74 }; 75 76 cpus { 77 #address-cells = <0x2>; 78 #size-cells = <0x0>; 79 80 cpu0: cpu@0 { 81 device_type = "cpu"; 82 compatible = "arm,cortex-a53", "arm,armv8"; 83 reg = <0x0 0x0>; 84 enable-method = "psci"; 85 next-level-cache = <&l2>; 86 clocks = <&scpi_dvfs 0>; 87 }; 88 89 cpu1: cpu@1 { 90 device_type = "cpu"; 91 compatible = "arm,cortex-a53", "arm,armv8"; 92 reg = <0x0 0x1>; 93 enable-method = "psci"; 94 next-level-cache = <&l2>; 95 clocks = <&scpi_dvfs 0>; 96 }; 97 98 cpu2: cpu@2 { 99 device_type = "cpu"; 100 compatible = "arm,cortex-a53", "arm,armv8"; 101 reg = <0x0 0x2>; 102 enable-method = "psci"; 103 next-level-cache = <&l2>; 104 clocks = <&scpi_dvfs 0>; 105 }; 106 107 cpu3: cpu@3 { 108 device_type = "cpu"; 109 compatible = "arm,cortex-a53", "arm,armv8"; 110 reg = <0x0 0x3>; 111 enable-method = "psci"; 112 next-level-cache = <&l2>; 113 clocks = <&scpi_dvfs 0>; 114 }; 115 116 l2: l2-cache0 { 117 compatible = "cache"; 118 }; 119 }; 120 121 arm-pmu { 122 compatible = "arm,cortex-a53-pmu"; 123 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 124 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 125 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 126 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; 127 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; 128 }; 129 130 psci { 131 compatible = "arm,psci-0.2"; 132 method = "smc"; 133 }; 134 135 timer { 136 compatible = "arm,armv8-timer"; 137 interrupts = <GIC_PPI 13 138 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 139 <GIC_PPI 14 140 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 141 <GIC_PPI 11 142 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 143 <GIC_PPI 10 144 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; 145 }; 146 147 xtal: xtal-clk { 148 compatible = "fixed-clock"; 149 clock-frequency = <24000000>; 150 clock-output-names = "xtal"; 151 #clock-cells = <0>; 152 }; 153 154 firmware { 155 sm: secure-monitor { 156 compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; 157 }; 158 }; 159 160 efuse: efuse { 161 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; 162 #address-cells = <1>; 163 #size-cells = <1>; 164 165 sn: sn@14 { 166 reg = <0x14 0x10>; 167 }; 168 169 eth_mac: eth_mac@34 { 170 reg = <0x34 0x10>; 171 }; 172 173 bid: bid@46 { 174 reg = <0x46 0x30>; 175 }; 176 }; 177 178 scpi { 179 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; 180 mboxes = <&mailbox 1 &mailbox 2>; 181 shmem = <&cpu_scp_lpri &cpu_scp_hpri>; 182 183 scpi_clocks: clocks { 184 compatible = "arm,scpi-clocks"; 185 186 scpi_dvfs: scpi_clocks@0 { 187 compatible = "arm,scpi-dvfs-clocks"; 188 #clock-cells = <1>; 189 clock-indices = <0>; 190 clock-output-names = "vcpu"; 191 }; 192 }; 193 194 scpi_sensors: sensors { 195 compatible = "arm,scpi-sensors"; 196 #thermal-sensor-cells = <1>; 197 }; 198 }; 199 200 soc { 201 compatible = "simple-bus"; 202 #address-cells = <2>; 203 #size-cells = <2>; 204 ranges; 205 206 cbus: cbus@c1100000 { 207 compatible = "simple-bus"; 208 reg = <0x0 0xc1100000 0x0 0x100000>; 209 #address-cells = <2>; 210 #size-cells = <2>; 211 ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; 212 213 reset: reset-controller@4404 { 214 compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; 215 reg = <0x0 0x04404 0x0 0x20>; 216 #reset-cells = <1>; 217 }; 218 219 uart_A: serial@84c0 { 220 compatible = "amlogic,meson-uart"; 221 reg = <0x0 0x84c0 0x0 0x14>; 222 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 223 clocks = <&xtal>; 224 status = "disabled"; 225 }; 226 227 uart_B: serial@84dc { 228 compatible = "amlogic,meson-uart"; 229 reg = <0x0 0x84dc 0x0 0x14>; 230 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; 231 clocks = <&xtal>; 232 status = "disabled"; 233 }; 234 235 i2c_A: i2c@8500 { 236 compatible = "amlogic,meson-gxbb-i2c"; 237 reg = <0x0 0x08500 0x0 0x20>; 238 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; 239 #address-cells = <1>; 240 #size-cells = <0>; 241 status = "disabled"; 242 }; 243 244 pwm_ab: pwm@8550 { 245 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 246 reg = <0x0 0x08550 0x0 0x10>; 247 #pwm-cells = <3>; 248 status = "disabled"; 249 }; 250 251 pwm_cd: pwm@8650 { 252 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 253 reg = <0x0 0x08650 0x0 0x10>; 254 #pwm-cells = <3>; 255 status = "disabled"; 256 }; 257 258 saradc: adc@8680 { 259 compatible = "amlogic,meson-saradc"; 260 reg = <0x0 0x8680 0x0 0x34>; 261 #io-channel-cells = <1>; 262 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; 263 status = "disabled"; 264 }; 265 266 pwm_ef: pwm@86c0 { 267 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 268 reg = <0x0 0x086c0 0x0 0x10>; 269 #pwm-cells = <3>; 270 status = "disabled"; 271 }; 272 273 uart_C: serial@8700 { 274 compatible = "amlogic,meson-uart"; 275 reg = <0x0 0x8700 0x0 0x14>; 276 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; 277 clocks = <&xtal>; 278 status = "disabled"; 279 }; 280 281 i2c_B: i2c@87c0 { 282 compatible = "amlogic,meson-gxbb-i2c"; 283 reg = <0x0 0x087c0 0x0 0x20>; 284 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; 285 #address-cells = <1>; 286 #size-cells = <0>; 287 status = "disabled"; 288 }; 289 290 i2c_C: i2c@87e0 { 291 compatible = "amlogic,meson-gxbb-i2c"; 292 reg = <0x0 0x087e0 0x0 0x20>; 293 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; 294 #address-cells = <1>; 295 #size-cells = <0>; 296 status = "disabled"; 297 }; 298 299 spifc: spi@8c80 { 300 compatible = "amlogic,meson-gxbb-spifc"; 301 reg = <0x0 0x08c80 0x0 0x80>; 302 #address-cells = <1>; 303 #size-cells = <0>; 304 status = "disabled"; 305 }; 306 307 watchdog@98d0 { 308 compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; 309 reg = <0x0 0x098d0 0x0 0x10>; 310 clocks = <&xtal>; 311 }; 312 }; 313 314 gic: interrupt-controller@c4301000 { 315 compatible = "arm,gic-400"; 316 reg = <0x0 0xc4301000 0 0x1000>, 317 <0x0 0xc4302000 0 0x2000>, 318 <0x0 0xc4304000 0 0x2000>, 319 <0x0 0xc4306000 0 0x2000>; 320 interrupt-controller; 321 interrupts = <GIC_PPI 9 322 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 323 #interrupt-cells = <3>; 324 #address-cells = <0>; 325 }; 326 327 sram: sram@c8000000 { 328 compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; 329 reg = <0x0 0xc8000000 0x0 0x14000>; 330 331 #address-cells = <1>; 332 #size-cells = <1>; 333 ranges = <0 0x0 0xc8000000 0x14000>; 334 335 cpu_scp_lpri: scp-shmem@0 { 336 compatible = "amlogic,meson-gxbb-scp-shmem"; 337 reg = <0x13000 0x400>; 338 }; 339 340 cpu_scp_hpri: scp-shmem@200 { 341 compatible = "amlogic,meson-gxbb-scp-shmem"; 342 reg = <0x13400 0x400>; 343 }; 344 }; 345 346 aobus: aobus@c8100000 { 347 compatible = "simple-bus"; 348 reg = <0x0 0xc8100000 0x0 0x100000>; 349 #address-cells = <2>; 350 #size-cells = <2>; 351 ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; 352 353 clkc_AO: clock-controller@040 { 354 compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; 355 reg = <0x0 0x00040 0x0 0x4>; 356 #clock-cells = <1>; 357 #reset-cells = <1>; 358 }; 359 360 uart_AO: serial@4c0 { 361 compatible = "amlogic,meson-uart"; 362 reg = <0x0 0x004c0 0x0 0x14>; 363 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; 364 clocks = <&xtal>; 365 status = "disabled"; 366 }; 367 368 uart_AO_B: serial@4e0 { 369 compatible = "amlogic,meson-uart"; 370 reg = <0x0 0x004e0 0x0 0x14>; 371 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; 372 clocks = <&xtal>; 373 status = "disabled"; 374 }; 375 376 i2c_AO: i2c@500 { 377 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 378 reg = <0x0 0x500 0x0 0x20>; 379 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; 380 #address-cells = <1>; 381 #size-cells = <0>; 382 status = "disabled"; 383 }; 384 385 pwm_AO_ab: pwm@550 { 386 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 387 reg = <0x0 0x00550 0x0 0x10>; 388 #pwm-cells = <3>; 389 status = "disabled"; 390 }; 391 392 ir: ir@580 { 393 compatible = "amlogic,meson-gxbb-ir"; 394 reg = <0x0 0x00580 0x0 0x40>; 395 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; 396 status = "disabled"; 397 }; 398 }; 399 400 periphs: periphs@c8834000 { 401 compatible = "simple-bus"; 402 reg = <0x0 0xc8834000 0x0 0x2000>; 403 #address-cells = <2>; 404 #size-cells = <2>; 405 ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; 406 407 rng { 408 compatible = "amlogic,meson-rng"; 409 reg = <0x0 0x0 0x0 0x4>; 410 }; 411 }; 412 413 hiubus: hiubus@c883c000 { 414 compatible = "simple-bus"; 415 reg = <0x0 0xc883c000 0x0 0x2000>; 416 #address-cells = <2>; 417 #size-cells = <2>; 418 ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; 419 420 mailbox: mailbox@404 { 421 compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; 422 reg = <0 0x404 0 0x4c>; 423 interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, 424 <0 209 IRQ_TYPE_EDGE_RISING>, 425 <0 210 IRQ_TYPE_EDGE_RISING>; 426 #mbox-cells = <1>; 427 }; 428 }; 429 430 ethmac: ethernet@c9410000 { 431 compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; 432 reg = <0x0 0xc9410000 0x0 0x10000 433 0x0 0xc8834540 0x0 0x4>; 434 interrupts = <0 8 1>; 435 interrupt-names = "macirq"; 436 status = "disabled"; 437 }; 438 439 apb: apb@d0000000 { 440 compatible = "simple-bus"; 441 reg = <0x0 0xd0000000 0x0 0x200000>; 442 #address-cells = <2>; 443 #size-cells = <2>; 444 ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; 445 446 sd_emmc_a: mmc@70000 { 447 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 448 reg = <0x0 0x70000 0x0 0x2000>; 449 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; 450 status = "disabled"; 451 }; 452 453 sd_emmc_b: mmc@72000 { 454 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 455 reg = <0x0 0x72000 0x0 0x2000>; 456 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; 457 status = "disabled"; 458 }; 459 460 sd_emmc_c: mmc@74000 { 461 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 462 reg = <0x0 0x74000 0x0 0x2000>; 463 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; 464 status = "disabled"; 465 }; 466 }; 467 468 vpu: vpu@d0100000 { 469 compatible = "amlogic,meson-gx-vpu"; 470 reg = <0x0 0xd0100000 0x0 0x100000>, 471 <0x0 0xc883c000 0x0 0x1000>, 472 <0x0 0xc8838000 0x0 0x1000>; 473 reg-names = "vpu", "hhi", "dmc"; 474 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 475 #address-cells = <1>; 476 #size-cells = <0>; 477 478 /* CVBS VDAC output port */ 479 cvbs_vdac_port: port@0 { 480 reg = <0>; 481 }; 482 }; 483 }; 484}; 485