1/* 2 * Copyright (c) 2016 Andreas Färber 3 * 4 * Copyright (c) 2016 BayLibre, SAS. 5 * Author: Neil Armstrong <narmstrong@baylibre.com> 6 * 7 * Copyright (c) 2016 Endless Computers, Inc. 8 * Author: Carlo Caione <carlo@endlessm.com> 9 * 10 * This file is dual-licensed: you can use it either under the terms 11 * of the GPL or the X11 license, at your option. Note that this dual 12 * licensing only applies to this file, and not this project as a 13 * whole. 14 * 15 * a) This library is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of the 18 * License, or (at your option) any later version. 19 * 20 * This library is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * Or, alternatively, 26 * 27 * b) Permission is hereby granted, free of charge, to any person 28 * obtaining a copy of this software and associated documentation 29 * files (the "Software"), to deal in the Software without 30 * restriction, including without limitation the rights to use, 31 * copy, modify, merge, publish, distribute, sublicense, and/or 32 * sell copies of the Software, and to permit persons to whom the 33 * Software is furnished to do so, subject to the following 34 * conditions: 35 * 36 * The above copyright notice and this permission notice shall be 37 * included in all copies or substantial portions of the Software. 38 * 39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 46 * OTHER DEALINGS IN THE SOFTWARE. 47 */ 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51#include <dt-bindings/interrupt-controller/arm-gic.h> 52 53/ { 54 interrupt-parent = <&gic>; 55 #address-cells = <2>; 56 #size-cells = <2>; 57 58 reserved-memory { 59 #address-cells = <2>; 60 #size-cells = <2>; 61 ranges; 62 63 /* 16 MiB reserved for Hardware ROM Firmware */ 64 hwrom_reserved: hwrom@0 { 65 reg = <0x0 0x0 0x0 0x1000000>; 66 no-map; 67 }; 68 69 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ 70 secmon_reserved: secmon@10000000 { 71 reg = <0x0 0x10000000 0x0 0x200000>; 72 no-map; 73 }; 74 75 linux,cma { 76 compatible = "shared-dma-pool"; 77 reusable; 78 size = <0x0 0xbc00000>; 79 alignment = <0x0 0x400000>; 80 linux,cma-default; 81 }; 82 }; 83 84 cpus { 85 #address-cells = <0x2>; 86 #size-cells = <0x0>; 87 88 cpu0: cpu@0 { 89 device_type = "cpu"; 90 compatible = "arm,cortex-a53", "arm,armv8"; 91 reg = <0x0 0x0>; 92 enable-method = "psci"; 93 next-level-cache = <&l2>; 94 clocks = <&scpi_dvfs 0>; 95 }; 96 97 cpu1: cpu@1 { 98 device_type = "cpu"; 99 compatible = "arm,cortex-a53", "arm,armv8"; 100 reg = <0x0 0x1>; 101 enable-method = "psci"; 102 next-level-cache = <&l2>; 103 clocks = <&scpi_dvfs 0>; 104 }; 105 106 cpu2: cpu@2 { 107 device_type = "cpu"; 108 compatible = "arm,cortex-a53", "arm,armv8"; 109 reg = <0x0 0x2>; 110 enable-method = "psci"; 111 next-level-cache = <&l2>; 112 clocks = <&scpi_dvfs 0>; 113 }; 114 115 cpu3: cpu@3 { 116 device_type = "cpu"; 117 compatible = "arm,cortex-a53", "arm,armv8"; 118 reg = <0x0 0x3>; 119 enable-method = "psci"; 120 next-level-cache = <&l2>; 121 clocks = <&scpi_dvfs 0>; 122 }; 123 124 l2: l2-cache0 { 125 compatible = "cache"; 126 }; 127 }; 128 129 arm-pmu { 130 compatible = "arm,cortex-a53-pmu"; 131 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 132 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 133 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 134 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; 135 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; 136 }; 137 138 psci { 139 compatible = "arm,psci-0.2"; 140 method = "smc"; 141 }; 142 143 timer { 144 compatible = "arm,armv8-timer"; 145 interrupts = <GIC_PPI 13 146 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 147 <GIC_PPI 14 148 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 149 <GIC_PPI 11 150 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 151 <GIC_PPI 10 152 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; 153 }; 154 155 xtal: xtal-clk { 156 compatible = "fixed-clock"; 157 clock-frequency = <24000000>; 158 clock-output-names = "xtal"; 159 #clock-cells = <0>; 160 }; 161 162 firmware { 163 sm: secure-monitor { 164 compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; 165 }; 166 }; 167 168 efuse: efuse { 169 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; 170 #address-cells = <1>; 171 #size-cells = <1>; 172 173 sn: sn@14 { 174 reg = <0x14 0x10>; 175 }; 176 177 eth_mac: eth_mac@34 { 178 reg = <0x34 0x10>; 179 }; 180 181 bid: bid@46 { 182 reg = <0x46 0x30>; 183 }; 184 }; 185 186 scpi { 187 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; 188 mboxes = <&mailbox 1 &mailbox 2>; 189 shmem = <&cpu_scp_lpri &cpu_scp_hpri>; 190 191 scpi_clocks: clocks { 192 compatible = "arm,scpi-clocks"; 193 194 scpi_dvfs: scpi_clocks@0 { 195 compatible = "arm,scpi-dvfs-clocks"; 196 #clock-cells = <1>; 197 clock-indices = <0>; 198 clock-output-names = "vcpu"; 199 }; 200 }; 201 202 scpi_sensors: sensors { 203 compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; 204 #thermal-sensor-cells = <1>; 205 }; 206 }; 207 208 soc { 209 compatible = "simple-bus"; 210 #address-cells = <2>; 211 #size-cells = <2>; 212 ranges; 213 214 cbus: cbus@c1100000 { 215 compatible = "simple-bus"; 216 reg = <0x0 0xc1100000 0x0 0x100000>; 217 #address-cells = <2>; 218 #size-cells = <2>; 219 ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; 220 221 reset: reset-controller@4404 { 222 compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; 223 reg = <0x0 0x04404 0x0 0x20>; 224 #reset-cells = <1>; 225 }; 226 227 uart_A: serial@84c0 { 228 compatible = "amlogic,meson-uart"; 229 reg = <0x0 0x84c0 0x0 0x14>; 230 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 231 clocks = <&xtal>; 232 status = "disabled"; 233 }; 234 235 uart_B: serial@84dc { 236 compatible = "amlogic,meson-uart"; 237 reg = <0x0 0x84dc 0x0 0x14>; 238 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; 239 clocks = <&xtal>; 240 status = "disabled"; 241 }; 242 243 i2c_A: i2c@8500 { 244 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 245 reg = <0x0 0x08500 0x0 0x20>; 246 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; 247 #address-cells = <1>; 248 #size-cells = <0>; 249 status = "disabled"; 250 }; 251 252 pwm_ab: pwm@8550 { 253 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 254 reg = <0x0 0x08550 0x0 0x10>; 255 #pwm-cells = <3>; 256 status = "disabled"; 257 }; 258 259 pwm_cd: pwm@8650 { 260 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 261 reg = <0x0 0x08650 0x0 0x10>; 262 #pwm-cells = <3>; 263 status = "disabled"; 264 }; 265 266 saradc: adc@8680 { 267 compatible = "amlogic,meson-saradc"; 268 reg = <0x0 0x8680 0x0 0x34>; 269 #io-channel-cells = <1>; 270 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; 271 status = "disabled"; 272 }; 273 274 pwm_ef: pwm@86c0 { 275 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 276 reg = <0x0 0x086c0 0x0 0x10>; 277 #pwm-cells = <3>; 278 status = "disabled"; 279 }; 280 281 uart_C: serial@8700 { 282 compatible = "amlogic,meson-uart"; 283 reg = <0x0 0x8700 0x0 0x14>; 284 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; 285 clocks = <&xtal>; 286 status = "disabled"; 287 }; 288 289 i2c_B: i2c@87c0 { 290 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 291 reg = <0x0 0x087c0 0x0 0x20>; 292 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; 293 #address-cells = <1>; 294 #size-cells = <0>; 295 status = "disabled"; 296 }; 297 298 i2c_C: i2c@87e0 { 299 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 300 reg = <0x0 0x087e0 0x0 0x20>; 301 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; 302 #address-cells = <1>; 303 #size-cells = <0>; 304 status = "disabled"; 305 }; 306 307 spifc: spi@8c80 { 308 compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; 309 reg = <0x0 0x08c80 0x0 0x80>; 310 #address-cells = <1>; 311 #size-cells = <0>; 312 status = "disabled"; 313 }; 314 315 watchdog@98d0 { 316 compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; 317 reg = <0x0 0x098d0 0x0 0x10>; 318 clocks = <&xtal>; 319 }; 320 }; 321 322 gic: interrupt-controller@c4301000 { 323 compatible = "arm,gic-400"; 324 reg = <0x0 0xc4301000 0 0x1000>, 325 <0x0 0xc4302000 0 0x2000>, 326 <0x0 0xc4304000 0 0x2000>, 327 <0x0 0xc4306000 0 0x2000>; 328 interrupt-controller; 329 interrupts = <GIC_PPI 9 330 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 331 #interrupt-cells = <3>; 332 #address-cells = <0>; 333 }; 334 335 sram: sram@c8000000 { 336 compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; 337 reg = <0x0 0xc8000000 0x0 0x14000>; 338 339 #address-cells = <1>; 340 #size-cells = <1>; 341 ranges = <0 0x0 0xc8000000 0x14000>; 342 343 cpu_scp_lpri: scp-shmem@0 { 344 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; 345 reg = <0x13000 0x400>; 346 }; 347 348 cpu_scp_hpri: scp-shmem@200 { 349 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; 350 reg = <0x13400 0x400>; 351 }; 352 }; 353 354 aobus: aobus@c8100000 { 355 compatible = "simple-bus"; 356 reg = <0x0 0xc8100000 0x0 0x100000>; 357 #address-cells = <2>; 358 #size-cells = <2>; 359 ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; 360 361 clkc_AO: clock-controller@040 { 362 compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; 363 reg = <0x0 0x00040 0x0 0x4>; 364 #clock-cells = <1>; 365 #reset-cells = <1>; 366 }; 367 368 uart_AO: serial@4c0 { 369 compatible = "amlogic,meson-uart"; 370 reg = <0x0 0x004c0 0x0 0x14>; 371 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; 372 clocks = <&xtal>; 373 status = "disabled"; 374 }; 375 376 uart_AO_B: serial@4e0 { 377 compatible = "amlogic,meson-uart"; 378 reg = <0x0 0x004e0 0x0 0x14>; 379 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; 380 clocks = <&xtal>; 381 status = "disabled"; 382 }; 383 384 i2c_AO: i2c@500 { 385 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 386 reg = <0x0 0x500 0x0 0x20>; 387 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; 388 #address-cells = <1>; 389 #size-cells = <0>; 390 status = "disabled"; 391 }; 392 393 pwm_AO_ab: pwm@550 { 394 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 395 reg = <0x0 0x00550 0x0 0x10>; 396 #pwm-cells = <3>; 397 status = "disabled"; 398 }; 399 400 ir: ir@580 { 401 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; 402 reg = <0x0 0x00580 0x0 0x40>; 403 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; 404 status = "disabled"; 405 }; 406 }; 407 408 periphs: periphs@c8834000 { 409 compatible = "simple-bus"; 410 reg = <0x0 0xc8834000 0x0 0x2000>; 411 #address-cells = <2>; 412 #size-cells = <2>; 413 ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; 414 415 hwrng: rng { 416 compatible = "amlogic,meson-rng"; 417 reg = <0x0 0x0 0x0 0x4>; 418 }; 419 }; 420 421 hiubus: hiubus@c883c000 { 422 compatible = "simple-bus"; 423 reg = <0x0 0xc883c000 0x0 0x2000>; 424 #address-cells = <2>; 425 #size-cells = <2>; 426 ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; 427 428 mailbox: mailbox@404 { 429 compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; 430 reg = <0 0x404 0 0x4c>; 431 interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, 432 <0 209 IRQ_TYPE_EDGE_RISING>, 433 <0 210 IRQ_TYPE_EDGE_RISING>; 434 #mbox-cells = <1>; 435 }; 436 }; 437 438 ethmac: ethernet@c9410000 { 439 compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; 440 reg = <0x0 0xc9410000 0x0 0x10000 441 0x0 0xc8834540 0x0 0x4>; 442 interrupts = <0 8 1>; 443 interrupt-names = "macirq"; 444 status = "disabled"; 445 }; 446 447 apb: apb@d0000000 { 448 compatible = "simple-bus"; 449 reg = <0x0 0xd0000000 0x0 0x200000>; 450 #address-cells = <2>; 451 #size-cells = <2>; 452 ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; 453 454 sd_emmc_a: mmc@70000 { 455 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 456 reg = <0x0 0x70000 0x0 0x2000>; 457 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; 458 status = "disabled"; 459 }; 460 461 sd_emmc_b: mmc@72000 { 462 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 463 reg = <0x0 0x72000 0x0 0x2000>; 464 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; 465 status = "disabled"; 466 }; 467 468 sd_emmc_c: mmc@74000 { 469 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 470 reg = <0x0 0x74000 0x0 0x2000>; 471 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; 472 status = "disabled"; 473 }; 474 }; 475 476 vpu: vpu@d0100000 { 477 compatible = "amlogic,meson-gx-vpu"; 478 reg = <0x0 0xd0100000 0x0 0x100000>, 479 <0x0 0xc883c000 0x0 0x1000>, 480 <0x0 0xc8838000 0x0 0x1000>; 481 reg-names = "vpu", "hhi", "dmc"; 482 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 483 #address-cells = <1>; 484 #size-cells = <0>; 485 486 /* CVBS VDAC output port */ 487 cvbs_vdac_port: port@0 { 488 reg = <0>; 489 }; 490 491 /* HDMI-TX output port */ 492 hdmi_tx_port: port@1 { 493 reg = <1>; 494 495 hdmi_tx_out: endpoint { 496 remote-endpoint = <&hdmi_tx_in>; 497 }; 498 }; 499 }; 500 501 hdmi_tx: hdmi-tx@c883a000 { 502 compatible = "amlogic,meson-gx-dw-hdmi"; 503 reg = <0x0 0xc883a000 0x0 0x1c>; 504 interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; 505 #address-cells = <1>; 506 #size-cells = <0>; 507 status = "disabled"; 508 509 /* VPU VENC Input */ 510 hdmi_tx_venc_port: port@0 { 511 reg = <0>; 512 513 hdmi_tx_in: endpoint { 514 remote-endpoint = <&hdmi_tx_out>; 515 }; 516 }; 517 518 /* TMDS Output */ 519 hdmi_tx_tmds_port: port@1 { 520 reg = <1>; 521 }; 522 }; 523 }; 524}; 525