xref: /openbmc/linux/scripts/dtc/include-prefixes/arm64/amlogic/meson-axg-s400.dts (revision 154b912c)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
 */

/dts-v1/;

#include "meson-axg.dtsi"
#include <dt-bindings/input/input.h>

/ {
	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
	model = "Amlogic Meson AXG S400 Development Board";

	adc_keys {
		compatible = "adc-keys";
		io-channels = <&saradc 0>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;

		button-next {
			label = "Next";
			linux,code = <KEY_NEXT>;
			press-threshold-microvolt = <1116000>; /* 62% */
		};

		button-prev {
			label = "Previous";
			linux,code = <KEY_PREVIOUS>;
			press-threshold-microvolt = <900000>; /* 50% */
		};

		button-wifi {
			label = "Wifi";
			linux,code = <KEY_WLAN>;
			press-threshold-microvolt = <684000>; /* 38% */
		};

		button-up {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			press-threshold-microvolt = <468000>; /* 26% */
		};

		button-down {
			label = "Volume Down";
			linux,code = <KEY_VOLUMEDOWN>;
			press-threshold-microvolt = <252000>; /* 14% */
		};

		button-voice {
			label = "Voice";
			linux,code = <KEY_VOICECOMMAND>;
			press-threshold-microvolt = <0>; /* 0% */
		};
	};

	aliases {
		serial0 = &uart_AO;
		serial1 = &uart_A;
	};

	main_12v: regulator-main_12v {
		compatible = "regulator-fixed";
		regulator-name = "12V";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
	};

	vddio_boot: regulator-vddio_boot {
		compatible = "regulator-fixed";
		regulator-name = "VDDIO_BOOT";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vddao_3v3>;
		regulator-always-on;
	};

	vddao_3v3: regulator-vddao_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "VDDAO_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&main_12v>;
		regulator-always-on;
	};

	vddio_ao18: regulator-vddio_ao18 {
		compatible = "regulator-fixed";
		regulator-name = "VDDIO_AO18";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vddao_3v3>;
		regulator-always-on;
	};

	vcc_3v3: regulator-vcc_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "VCC_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vddao_3v3>;
		regulator-always-on;
	};

	vcc_5v: regulator-vcc_5v {
		compatible = "regulator-fixed";
		regulator-name = "VCC5V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&main_12v>;

		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	usb_pwr: regulator-usb_pwr {
		compatible = "regulator-fixed";
		regulator-name = "USB_PWR";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_5v>;

		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	emmc_pwrseq: emmc-pwrseq {
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
		clocks = <&wifi32k>;
		clock-names = "ext_clock";
	};

	wifi32k: wifi32k {
		compatible = "pwm-clock";
		#clock-cells = <0>;
		clock-frequency = <32768>;
		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
	};

	speaker-leds {
		compatible = "gpio-leds";

		aled1 {
			label = "speaker:aled1";
			gpios = <&gpio_speaker 7 0>;
		};

		aled2 {
			label = "speaker:aled2";
			gpios = <&gpio_speaker 6 0>;
		};

		aled3 {
			label = "speaker:aled3";
			gpios = <&gpio_speaker 5 0>;
		};

		aled4 {
			label = "speaker:aled4";
			gpios = <&gpio_speaker 4 0>;
		};

		aled5 {
			label = "speaker:aled5";
			gpios = <&gpio_speaker 3 0>;
		};

		aled6 {
			label = "speaker:aled6";
			gpios = <&gpio_speaker 2 0>;
		};
	};

	linein: audio-codec@0 {
		#sound-dai-cells = <0>;
		compatible = "everest,es7241";
		VDDA-supply = <&vcc_3v3>;
		VDDP-supply = <&vcc_3v3>;
		VDDD-supply = <&vcc_3v3>;
		status = "okay";
		sound-name-prefix = "Linein";
	};

	lineout: audio-codec@1 {
		#sound-dai-cells = <0>;
		compatible = "everest,es7154";
		VDD-supply = <&vcc_3v3>;
		PVDD-supply = <&vcc_5v>;
		status = "okay";
		sound-name-prefix = "Lineout";
	};
};

&ethmac {
	status = "okay";
	phy-mode = "rgmii";
	pinctrl-0 = <&eth_rgmii_y_pins>;
	pinctrl-names = "default";
};

&uart_A {
	status = "okay";
	pinctrl-0 = <&uart_a_pins>;
	pinctrl-names = "default";
};

&uart_AO {
	status = "okay";
	pinctrl-0 = <&uart_ao_a_pins>;
	pinctrl-names = "default";
};

&ir {
	status = "okay";
	pinctrl-0 = <&remote_input_ao_pins>;
	pinctrl-names = "default";
};

&i2c1 {
	status = "okay";
	pinctrl-0 = <&i2c1_z_pins>;
	pinctrl-names = "default";

	speaker_amp1: audio-codec@1b {
		compatible = "ti,tas5707";
		reg = <0x1b>;
		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		AVDD-supply = <&vcc_3v3>;
		DVDD-supply = <&vcc_3v3>;
		PVDD_A-supply = <&main_12v>;
		PVDD_B-supply = <&main_12v>;
		PVDD_C-supply = <&main_12v>;
		PVDD_D-supply = <&main_12v>;
	};
};

&i2c_AO {
	status = "okay";
	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
	pinctrl-names = "default";

	gpio_speaker: gpio-controller@1f {
		compatible = "nxp,pca9557";
		reg = <0x1f>;
		gpio-controller;
		#gpio-cells = <2>;
		vcc-supply = <&vddao_3v3>;
	};
};

&pwm_ab {
	status = "okay";
	pinctrl-0 = <&pwm_a_x20_pins>;
	pinctrl-names = "default";
};

/* emmc storage */
&sd_emmc_c {
	status = "okay";
	pinctrl-0 = <&emmc_pins>;
	pinctrl-1 = <&emmc_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <8>;
	cap-sd-highspeed;
	cap-mmc-highspeed;
	max-frequency = <180000000>;
	non-removable;
	disable-wp;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;

	vmmc-supply = <&vcc_3v3>;
	vqmmc-supply = <&vddio_boot>;
};

/* wifi module */
&sd_emmc_b {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	pinctrl-0 = <&sdio_pins>;
	pinctrl-1 = <&sdio_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <4>;
	cap-sd-highspeed;
	max-frequency = <100000000>;
	non-removable;
	disable-wp;

	mmc-pwrseq = <&sdio_pwrseq>;

	vmmc-supply = <&vddao_3v3>;
	vqmmc-supply = <&vddio_boot>;

	brcmf: wifi@1 {
		reg = <1>;
		compatible = "brcm,bcm4329-fmac";
	};
};

&saradc {
	status = "okay";
	vref-supply = <&vddio_ao18>;
};