1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2018 Amarula Solutions
3// Author: Jagan Teki <jagan@amarulasolutions.com>
4
5/dts-v1/;
6
7#include "sun50i-h6.dtsi"
8
9#include <dt-bindings/gpio/gpio.h>
10
11/ {
12	model = "OrangePi One Plus";
13	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
14
15	aliases {
16		serial0 = &uart0;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	leds {
24		compatible = "gpio-leds";
25
26		power {
27			label = "orangepi:red:power";
28			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
29			default-state = "on";
30		};
31
32		status {
33			label = "orangepi:green:status";
34			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
35		};
36	};
37
38	reg_vcc5v: vcc5v {
39		/* board wide 5V supply directly from the DC jack */
40		compatible = "regulator-fixed";
41		regulator-name = "vcc-5v";
42		regulator-min-microvolt = <5000000>;
43		regulator-max-microvolt = <5000000>;
44		regulator-always-on;
45	};
46};
47
48&ehci0 {
49	status = "okay";
50};
51
52&ehci3 {
53	status = "okay";
54};
55
56&gpu {
57	mali-supply = <&reg_dcdcc>;
58	status = "okay";
59};
60
61&mmc0 {
62	vmmc-supply = <&reg_cldo1>;
63	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
64	bus-width = <4>;
65	status = "okay";
66};
67
68&ohci0 {
69	status = "okay";
70};
71
72&ohci3 {
73	status = "okay";
74};
75
76&r_i2c {
77	status = "okay";
78
79	axp805: pmic@36 {
80		compatible = "x-powers,axp805", "x-powers,axp806";
81		reg = <0x36>;
82		interrupt-parent = <&r_intc>;
83		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
84		interrupt-controller;
85		#interrupt-cells = <1>;
86		x-powers,self-working-mode;
87		vina-supply = <&reg_vcc5v>;
88		vinb-supply = <&reg_vcc5v>;
89		vinc-supply = <&reg_vcc5v>;
90		vind-supply = <&reg_vcc5v>;
91		vine-supply = <&reg_vcc5v>;
92		aldoin-supply = <&reg_vcc5v>;
93		bldoin-supply = <&reg_vcc5v>;
94		cldoin-supply = <&reg_vcc5v>;
95
96		regulators {
97			reg_aldo1: aldo1 {
98				regulator-always-on;
99				regulator-min-microvolt = <3300000>;
100				regulator-max-microvolt = <3300000>;
101				regulator-name = "vcc-pl";
102			};
103
104			reg_aldo2: aldo2 {
105				regulator-min-microvolt = <3300000>;
106				regulator-max-microvolt = <3300000>;
107				regulator-name = "vcc-ac200";
108			};
109
110			reg_aldo3: aldo3 {
111				regulator-always-on;
112				regulator-min-microvolt = <3300000>;
113				regulator-max-microvolt = <3300000>;
114				regulator-name = "vcc25-dram";
115			};
116
117			reg_bldo1: bldo1 {
118				regulator-always-on;
119				regulator-min-microvolt = <1800000>;
120				regulator-max-microvolt = <1800000>;
121				regulator-name = "vcc-bias-pll";
122			};
123
124			reg_bldo2: bldo2 {
125				regulator-always-on;
126				regulator-min-microvolt = <1800000>;
127				regulator-max-microvolt = <1800000>;
128				regulator-name = "vcc-efuse-pcie-hdmi-io";
129			};
130
131			reg_bldo3: bldo3 {
132				regulator-always-on;
133				regulator-min-microvolt = <1800000>;
134				regulator-max-microvolt = <1800000>;
135				regulator-name = "vcc-dcxoio";
136			};
137
138			bldo4 {
139				/* unused */
140			};
141
142			reg_cldo1: cldo1 {
143				regulator-always-on;
144				regulator-min-microvolt = <3300000>;
145				regulator-max-microvolt = <3300000>;
146				regulator-name = "vcc-3v3";
147			};
148
149			reg_cldo2: cldo2 {
150				regulator-min-microvolt = <3300000>;
151				regulator-max-microvolt = <3300000>;
152				regulator-name = "vcc-wifi-1";
153			};
154
155			reg_cldo3: cldo3 {
156				regulator-min-microvolt = <3300000>;
157				regulator-max-microvolt = <3300000>;
158				regulator-name = "vcc-wifi-2";
159			};
160
161			reg_dcdca: dcdca {
162				regulator-always-on;
163				regulator-min-microvolt = <810000>;
164				regulator-max-microvolt = <1080000>;
165				regulator-name = "vdd-cpu";
166			};
167
168			reg_dcdcc: dcdcc {
169				regulator-enable-ramp-delay = <32000>;
170				regulator-min-microvolt = <810000>;
171				regulator-max-microvolt = <1080000>;
172				regulator-name = "vdd-gpu";
173			};
174
175			reg_dcdcd: dcdcd {
176				regulator-always-on;
177				regulator-min-microvolt = <960000>;
178				regulator-max-microvolt = <960000>;
179				regulator-name = "vdd-sys";
180			};
181
182			reg_dcdce: dcdce {
183				regulator-always-on;
184				regulator-min-microvolt = <1200000>;
185				regulator-max-microvolt = <1200000>;
186				regulator-name = "vcc-dram";
187			};
188
189			sw {
190				/* unused */
191			};
192		};
193	};
194};
195
196&r_ir {
197	status = "okay";
198};
199
200&uart0 {
201	pinctrl-names = "default";
202	pinctrl-0 = <&uart0_ph_pins>;
203	status = "okay";
204};
205
206&usb2otg {
207	dr_mode = "otg";
208	status = "okay";
209};
210
211&usb2phy {
212	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
213	usb0_vbus-supply = <&reg_vcc5v>;
214	usb3_vbus-supply = <&reg_vcc5v>;
215	status = "okay";
216};
217