1/* 2 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> 3 * 4 * Based on sun50i-h5-orangepi-pc2.dts, which is: 5 * Copyright (C) 2016 ARM Ltd. 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of the 15 * License, or (at your option) any later version. 16 * 17 * This file is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * Or, alternatively, 23 * 24 * b) Permission is hereby granted, free of charge, to any person 25 * obtaining a copy of this software and associated documentation 26 * files (the "Software"), to deal in the Software without 27 * restriction, including without limitation the rights to use, 28 * copy, modify, merge, publish, distribute, sublicense, and/or 29 * sell copies of the Software, and to permit persons to whom the 30 * Software is furnished to do so, subject to the following 31 * conditions: 32 * 33 * The above copyright notice and this permission notice shall be 34 * included in all copies or substantial portions of the Software. 35 * 36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 43 * OTHER DEALINGS IN THE SOFTWARE. 44 */ 45 46/dts-v1/; 47#include "sun50i-h5.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/input/input.h> 51 52/ { 53 model = "Xunlong Orange Pi Prime"; 54 compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; 55 56 aliases { 57 serial0 = &uart0; 58 }; 59 60 chosen { 61 stdout-path = "serial0:115200n8"; 62 }; 63 64 leds { 65 compatible = "gpio-leds"; 66 67 pwr { 68 label = "orangepi:green:pwr"; 69 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; 70 default-state = "on"; 71 }; 72 73 status { 74 label = "orangepi:red:status"; 75 gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; 76 }; 77 }; 78 79 r-gpio-keys { 80 compatible = "gpio-keys"; 81 82 sw4 { 83 label = "sw4"; 84 linux,code = <BTN_0>; 85 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 86 }; 87 }; 88 89 reg_vcc3v3: vcc3v3 { 90 compatible = "regulator-fixed"; 91 regulator-name = "vcc3v3"; 92 regulator-min-microvolt = <3300000>; 93 regulator-max-microvolt = <3300000>; 94 }; 95 96 reg_usb0_vbus: usb0-vbus { 97 compatible = "regulator-fixed"; 98 regulator-name = "usb0-vbus"; 99 regulator-min-microvolt = <5000000>; 100 regulator-max-microvolt = <5000000>; 101 enable-active-high; 102 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ 103 status = "okay"; 104 }; 105 106 wifi_pwrseq: wifi_pwrseq { 107 compatible = "mmc-pwrseq-simple"; 108 reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */ 109 }; 110}; 111 112&codec { 113 allwinner,audio-routing = 114 "Line Out", "LINEOUT", 115 "MIC1", "Mic", 116 "Mic", "MBIAS"; 117 status = "okay"; 118}; 119 120&ehci0 { 121 status = "okay"; 122}; 123 124&ehci1 { 125 status = "okay"; 126}; 127 128&ehci2 { 129 status = "okay"; 130}; 131 132&ehci3 { 133 status = "okay"; 134}; 135 136&ir { 137 pinctrl-names = "default"; 138 pinctrl-0 = <&ir_pins_a>; 139 status = "okay"; 140}; 141 142&mmc0 { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; 145 vmmc-supply = <®_vcc3v3>; 146 bus-width = <4>; 147 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 148 status = "okay"; 149}; 150 151&mmc1 { 152 pinctrl-names = "default"; 153 pinctrl-0 = <&mmc1_pins_a>; 154 vmmc-supply = <®_vcc3v3>; 155 mmc-pwrseq = <&wifi_pwrseq>; 156 bus-width = <4>; 157 non-removable; 158 status = "okay"; 159}; 160 161&ohci0 { 162 status = "okay"; 163}; 164 165&ohci1 { 166 status = "okay"; 167}; 168 169&ohci2 { 170 status = "okay"; 171}; 172 173&ohci3 { 174 status = "okay"; 175}; 176 177&uart0 { 178 pinctrl-names = "default"; 179 pinctrl-0 = <&uart0_pins_a>; 180 status = "okay"; 181}; 182 183&uart1 { 184 pinctrl-names = "default"; 185 pinctrl-0 = <&uart1_pins>; 186 status = "disabled"; 187}; 188 189&uart2 { 190 pinctrl-names = "default"; 191 pinctrl-0 = <&uart2_pins>; 192 status = "disabled"; 193}; 194 195&usb_otg { 196 dr_mode = "otg"; 197 status = "okay"; 198}; 199 200&usbphy { 201 /* USB Type-A ports' VBUS is always on */ 202 usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ 203 usb0_vbus-supply = <®_usb0_vbus>; 204 status = "okay"; 205}; 206