1/* 2 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> 3 * 4 * Based on sun50i-h5-orangepi-pc2.dts, which is: 5 * Copyright (C) 2016 ARM Ltd. 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of the 15 * License, or (at your option) any later version. 16 * 17 * This file is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * Or, alternatively, 23 * 24 * b) Permission is hereby granted, free of charge, to any person 25 * obtaining a copy of this software and associated documentation 26 * files (the "Software"), to deal in the Software without 27 * restriction, including without limitation the rights to use, 28 * copy, modify, merge, publish, distribute, sublicense, and/or 29 * sell copies of the Software, and to permit persons to whom the 30 * Software is furnished to do so, subject to the following 31 * conditions: 32 * 33 * The above copyright notice and this permission notice shall be 34 * included in all copies or substantial portions of the Software. 35 * 36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 43 * OTHER DEALINGS IN THE SOFTWARE. 44 */ 45 46/dts-v1/; 47#include "sun50i-h5.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/input/input.h> 51 52/ { 53 model = "Xunlong Orange Pi Prime"; 54 compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; 55 56 aliases { 57 serial0 = &uart0; 58 }; 59 60 chosen { 61 stdout-path = "serial0:115200n8"; 62 }; 63 64 leds { 65 compatible = "gpio-leds"; 66 67 pwr { 68 label = "orangepi:green:pwr"; 69 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; 70 default-state = "on"; 71 }; 72 73 status { 74 label = "orangepi:red:status"; 75 gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; 76 }; 77 }; 78 79 r-gpio-keys { 80 compatible = "gpio-keys"; 81 82 sw4 { 83 label = "sw4"; 84 linux,code = <BTN_0>; 85 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 86 }; 87 }; 88 89 reg_gmac_3v3: gmac-3v3 { 90 compatible = "regulator-fixed"; 91 regulator-name = "gmac-3v3"; 92 regulator-min-microvolt = <3300000>; 93 regulator-max-microvolt = <3300000>; 94 startup-delay-us = <100000>; 95 enable-active-high; 96 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; 97 }; 98 99 reg_vcc3v3: vcc3v3 { 100 compatible = "regulator-fixed"; 101 regulator-name = "vcc3v3"; 102 regulator-min-microvolt = <3300000>; 103 regulator-max-microvolt = <3300000>; 104 }; 105 106 reg_usb0_vbus: usb0-vbus { 107 compatible = "regulator-fixed"; 108 regulator-name = "usb0-vbus"; 109 regulator-min-microvolt = <5000000>; 110 regulator-max-microvolt = <5000000>; 111 enable-active-high; 112 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ 113 status = "okay"; 114 }; 115 116 wifi_pwrseq: wifi_pwrseq { 117 compatible = "mmc-pwrseq-simple"; 118 reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */ 119 }; 120}; 121 122&codec { 123 allwinner,audio-routing = 124 "Line Out", "LINEOUT", 125 "MIC1", "Mic", 126 "Mic", "MBIAS"; 127 status = "okay"; 128}; 129 130&ehci0 { 131 status = "okay"; 132}; 133 134&ehci1 { 135 status = "okay"; 136}; 137 138&ehci2 { 139 status = "okay"; 140}; 141 142&ehci3 { 143 status = "okay"; 144}; 145 146&ir { 147 pinctrl-names = "default"; 148 pinctrl-0 = <&ir_pins_a>; 149 status = "okay"; 150}; 151 152&mmc0 { 153 pinctrl-names = "default"; 154 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; 155 vmmc-supply = <®_vcc3v3>; 156 bus-width = <4>; 157 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 158 status = "okay"; 159}; 160 161&mmc1 { 162 pinctrl-names = "default"; 163 pinctrl-0 = <&mmc1_pins_a>; 164 vmmc-supply = <®_vcc3v3>; 165 mmc-pwrseq = <&wifi_pwrseq>; 166 bus-width = <4>; 167 non-removable; 168 status = "okay"; 169}; 170 171&ohci0 { 172 status = "okay"; 173}; 174 175&ohci1 { 176 status = "okay"; 177}; 178 179&ohci2 { 180 status = "okay"; 181}; 182 183&ohci3 { 184 status = "okay"; 185}; 186 187&uart0 { 188 pinctrl-names = "default"; 189 pinctrl-0 = <&uart0_pins_a>; 190 status = "okay"; 191}; 192 193&uart1 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&uart1_pins>; 196 status = "disabled"; 197}; 198 199&uart2 { 200 pinctrl-names = "default"; 201 pinctrl-0 = <&uart2_pins>; 202 status = "disabled"; 203}; 204 205&usb_otg { 206 dr_mode = "otg"; 207 status = "okay"; 208}; 209 210&usbphy { 211 /* USB Type-A ports' VBUS is always on */ 212 usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ 213 usb0_vbus-supply = <®_usb0_vbus>; 214 status = "okay"; 215}; 216