1/* 2 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> 3 * 4 * Based on sun50i-h5-orangepi-pc2.dts, which is: 5 * Copyright (C) 2016 ARM Ltd. 6 * 7 * This file is dual-licensed: you can use it either under the terms 8 * of the GPL or the X11 license, at your option. Note that this dual 9 * licensing only applies to this file, and not this project as a 10 * whole. 11 * 12 * a) This file is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of the 15 * License, or (at your option) any later version. 16 * 17 * This file is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * Or, alternatively, 23 * 24 * b) Permission is hereby granted, free of charge, to any person 25 * obtaining a copy of this software and associated documentation 26 * files (the "Software"), to deal in the Software without 27 * restriction, including without limitation the rights to use, 28 * copy, modify, merge, publish, distribute, sublicense, and/or 29 * sell copies of the Software, and to permit persons to whom the 30 * Software is furnished to do so, subject to the following 31 * conditions: 32 * 33 * The above copyright notice and this permission notice shall be 34 * included in all copies or substantial portions of the Software. 35 * 36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 43 * OTHER DEALINGS IN THE SOFTWARE. 44 */ 45 46/dts-v1/; 47#include "sun50i-h5.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/input/input.h> 51 52/ { 53 model = "Xunlong Orange Pi Prime"; 54 compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; 55 56 aliases { 57 ethernet0 = &emac; 58 serial0 = &uart0; 59 }; 60 61 chosen { 62 stdout-path = "serial0:115200n8"; 63 }; 64 65 leds { 66 compatible = "gpio-leds"; 67 68 pwr { 69 label = "orangepi:green:pwr"; 70 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; 71 default-state = "on"; 72 }; 73 74 status { 75 label = "orangepi:red:status"; 76 gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; 77 }; 78 }; 79 80 r-gpio-keys { 81 compatible = "gpio-keys"; 82 83 sw4 { 84 label = "sw4"; 85 linux,code = <BTN_0>; 86 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 87 }; 88 }; 89 90 reg_gmac_3v3: gmac-3v3 { 91 compatible = "regulator-fixed"; 92 regulator-name = "gmac-3v3"; 93 regulator-min-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>; 95 startup-delay-us = <100000>; 96 enable-active-high; 97 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; 98 }; 99 100 reg_vcc3v3: vcc3v3 { 101 compatible = "regulator-fixed"; 102 regulator-name = "vcc3v3"; 103 regulator-min-microvolt = <3300000>; 104 regulator-max-microvolt = <3300000>; 105 }; 106 107 reg_usb0_vbus: usb0-vbus { 108 compatible = "regulator-fixed"; 109 regulator-name = "usb0-vbus"; 110 regulator-min-microvolt = <5000000>; 111 regulator-max-microvolt = <5000000>; 112 enable-active-high; 113 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ 114 status = "okay"; 115 }; 116 117 wifi_pwrseq: wifi_pwrseq { 118 compatible = "mmc-pwrseq-simple"; 119 reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */ 120 }; 121}; 122 123&codec { 124 allwinner,audio-routing = 125 "Line Out", "LINEOUT", 126 "MIC1", "Mic", 127 "Mic", "MBIAS"; 128 status = "okay"; 129}; 130 131&ehci0 { 132 status = "okay"; 133}; 134 135&ehci1 { 136 status = "okay"; 137}; 138 139&ehci2 { 140 status = "okay"; 141}; 142 143&ehci3 { 144 status = "okay"; 145}; 146 147&emac { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&emac_rgmii_pins>; 150 phy-supply = <®_gmac_3v3>; 151 phy-handle = <&ext_rgmii_phy>; 152 phy-mode = "rgmii"; 153 status = "okay"; 154}; 155 156&external_mdio { 157 ext_rgmii_phy: ethernet-phy@1 { 158 compatible = "ethernet-phy-ieee802.3-c22"; 159 reg = <1>; 160 }; 161}; 162 163&ir { 164 pinctrl-names = "default"; 165 pinctrl-0 = <&ir_pins_a>; 166 status = "okay"; 167}; 168 169&mmc0 { 170 vmmc-supply = <®_vcc3v3>; 171 bus-width = <4>; 172 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 173 status = "okay"; 174}; 175 176&mmc1 { 177 pinctrl-names = "default"; 178 pinctrl-0 = <&mmc1_pins_a>; 179 vmmc-supply = <®_vcc3v3>; 180 mmc-pwrseq = <&wifi_pwrseq>; 181 bus-width = <4>; 182 non-removable; 183 status = "okay"; 184}; 185 186&ohci0 { 187 status = "okay"; 188}; 189 190&ohci1 { 191 status = "okay"; 192}; 193 194&ohci2 { 195 status = "okay"; 196}; 197 198&ohci3 { 199 status = "okay"; 200}; 201 202&uart0 { 203 pinctrl-names = "default"; 204 pinctrl-0 = <&uart0_pins_a>; 205 status = "okay"; 206}; 207 208&uart1 { 209 pinctrl-names = "default"; 210 pinctrl-0 = <&uart1_pins>; 211 status = "disabled"; 212}; 213 214&uart2 { 215 pinctrl-names = "default"; 216 pinctrl-0 = <&uart2_pins>; 217 status = "disabled"; 218}; 219 220&usb_otg { 221 dr_mode = "otg"; 222 status = "okay"; 223}; 224 225&usbphy { 226 /* USB Type-A ports' VBUS is always on */ 227 usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ 228 usb0_vbus-supply = <®_usb0_vbus>; 229 status = "okay"; 230}; 231