1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0-only 2*724ba675SRob Herring/* 3*724ba675SRob Herring * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with 4*724ba675SRob Herring * UART support 5*724ba675SRob Herring * 6*724ba675SRob Herring * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> 7*724ba675SRob Herring */ 8*724ba675SRob Herring 9*724ba675SRob Herring#include <dt-bindings/pinctrl/at91.h> 10*724ba675SRob Herring#include <dt-bindings/interrupt-controller/irq.h> 11*724ba675SRob Herring#include <dt-bindings/clock/at91.h> 12*724ba675SRob Herring#include <dt-bindings/mfd/at91-usart.h> 13*724ba675SRob Herring 14*724ba675SRob Herring/ { 15*724ba675SRob Herring aliases { 16*724ba675SRob Herring serial5 = &uart0; 17*724ba675SRob Herring serial6 = &uart1; 18*724ba675SRob Herring }; 19*724ba675SRob Herring 20*724ba675SRob Herring ahb { 21*724ba675SRob Herring apb { 22*724ba675SRob Herring pinctrl@fffff200 { 23*724ba675SRob Herring uart0 { 24*724ba675SRob Herring pinctrl_uart0: uart0-0 { 25*724ba675SRob Herring atmel,pins = 26*724ba675SRob Herring <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with PWMFI2, ISI_D8 */ 27*724ba675SRob Herring AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with ISI_PCK */ 28*724ba675SRob Herring }; 29*724ba675SRob Herring }; 30*724ba675SRob Herring 31*724ba675SRob Herring uart1 { 32*724ba675SRob Herring pinctrl_uart1: uart1-0 { 33*724ba675SRob Herring atmel,pins = 34*724ba675SRob Herring <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with TWD0, ISI_VSYNC */ 35*724ba675SRob Herring AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with TWCK0, ISI_HSYNC */ 36*724ba675SRob Herring }; 37*724ba675SRob Herring }; 38*724ba675SRob Herring }; 39*724ba675SRob Herring 40*724ba675SRob Herring uart0: serial@f0024000 { 41*724ba675SRob Herring compatible = "atmel,at91sam9260-usart"; 42*724ba675SRob Herring reg = <0xf0024000 0x100>; 43*724ba675SRob Herring atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 44*724ba675SRob Herring interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; 45*724ba675SRob Herring pinctrl-names = "default"; 46*724ba675SRob Herring pinctrl-0 = <&pinctrl_uart0>; 47*724ba675SRob Herring clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; 48*724ba675SRob Herring clock-names = "usart"; 49*724ba675SRob Herring status = "disabled"; 50*724ba675SRob Herring }; 51*724ba675SRob Herring 52*724ba675SRob Herring uart1: serial@f8028000 { 53*724ba675SRob Herring compatible = "atmel,at91sam9260-usart"; 54*724ba675SRob Herring reg = <0xf8028000 0x100>; 55*724ba675SRob Herring atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 56*724ba675SRob Herring interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; 57*724ba675SRob Herring pinctrl-names = "default"; 58*724ba675SRob Herring pinctrl-0 = <&pinctrl_uart1>; 59*724ba675SRob Herring clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; 60*724ba675SRob Herring clock-names = "usart"; 61*724ba675SRob Herring status = "disabled"; 62*724ba675SRob Herring }; 63*724ba675SRob Herring }; 64*724ba675SRob Herring }; 65*724ba675SRob Herring}; 66