1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
4 *
5 *  Copyright (C) 2011 Atmel,
6 *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
7 *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 */
9
10#include <dt-bindings/pinctrl/at91.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/clock/at91.h>
14#include <dt-bindings/mfd/at91-usart.h>
15
16/ {
17	#address-cells = <1>;
18	#size-cells = <1>;
19	model = "Atmel AT91SAM9260 family SoC";
20	compatible = "atmel,at91sam9260";
21	interrupt-parent = <&aic>;
22
23	aliases {
24		serial0 = &dbgu;
25		serial1 = &usart0;
26		serial2 = &usart1;
27		serial3 = &usart2;
28		serial4 = &usart3;
29		serial5 = &uart0;
30		serial6 = &uart1;
31		gpio0 = &pioA;
32		gpio1 = &pioB;
33		gpio2 = &pioC;
34		tcb0 = &tcb0;
35		tcb1 = &tcb1;
36		i2c0 = &i2c0;
37		ssc0 = &ssc0;
38	};
39	cpus {
40		#address-cells = <1>;
41		#size-cells = <0>;
42
43		cpu@0 {
44			compatible = "arm,arm926ej-s";
45			device_type = "cpu";
46			reg = <0>;
47		};
48	};
49
50	memory@20000000 {
51		device_type = "memory";
52		reg = <0x20000000 0x04000000>;
53	};
54
55	clocks {
56		slow_xtal: slow_xtal {
57			compatible = "fixed-clock";
58			#clock-cells = <0>;
59			clock-frequency = <0>;
60		};
61
62		main_xtal: main_xtal {
63			compatible = "fixed-clock";
64			#clock-cells = <0>;
65			clock-frequency = <0>;
66		};
67
68		adc_op_clk: adc_op_clk{
69			compatible = "fixed-clock";
70			#clock-cells = <0>;
71			clock-frequency = <5000000>;
72		};
73	};
74
75	sram0: sram@2ff000 {
76		compatible = "mmio-sram";
77		reg = <0x002ff000 0x2000>;
78		#address-cells = <1>;
79		#size-cells = <1>;
80		ranges = <0 0x002ff000 0x2000>;
81	};
82
83	ahb {
84		compatible = "simple-bus";
85		#address-cells = <1>;
86		#size-cells = <1>;
87		ranges;
88
89		apb {
90			compatible = "simple-bus";
91			#address-cells = <1>;
92			#size-cells = <1>;
93			ranges;
94
95			aic: interrupt-controller@fffff000 {
96				#interrupt-cells = <3>;
97				compatible = "atmel,at91rm9200-aic";
98				interrupt-controller;
99				reg = <0xfffff000 0x200>;
100				atmel,external-irqs = <29 30 31>;
101			};
102
103			ramc0: ramc@ffffea00 {
104				compatible = "atmel,at91sam9260-sdramc";
105				reg = <0xffffea00 0x200>;
106			};
107
108			smc: smc@ffffec00 {
109				compatible = "atmel,at91sam9260-smc", "syscon";
110				reg = <0xffffec00 0x200>;
111			};
112
113			matrix: matrix@ffffee00 {
114				compatible = "atmel,at91sam9260-matrix", "syscon";
115				reg = <0xffffee00 0x200>;
116			};
117
118			pmc: clock-controller@fffffc00 {
119				compatible = "atmel,at91sam9260-pmc", "syscon";
120				reg = <0xfffffc00 0x100>;
121				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
122				#clock-cells = <2>;
123				clocks = <&slow_xtal>, <&main_xtal>;
124				clock-names = "slow_xtal", "main_xtal";
125			};
126
127			reset-controller@fffffd00 {
128				compatible = "atmel,at91sam9260-rstc";
129				reg = <0xfffffd00 0x10>;
130				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
131			};
132
133			shdwc@fffffd10 {
134				compatible = "atmel,at91sam9260-shdwc";
135				reg = <0xfffffd10 0x10>;
136				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
137			};
138
139			pit: timer@fffffd30 {
140				compatible = "atmel,at91sam9260-pit";
141				reg = <0xfffffd30 0xf>;
142				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
143				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
144			};
145
146			tcb0: timer@fffa0000 {
147				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
148				#address-cells = <1>;
149				#size-cells = <0>;
150				reg = <0xfffa0000 0x100>;
151				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
152					      18 IRQ_TYPE_LEVEL_HIGH 0
153					      19 IRQ_TYPE_LEVEL_HIGH 0>;
154				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
155				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
156			};
157
158			tcb1: timer@fffdc000 {
159				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
160				#address-cells = <1>;
161				#size-cells = <0>;
162				reg = <0xfffdc000 0x100>;
163				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
164					      27 IRQ_TYPE_LEVEL_HIGH 0
165					      28 IRQ_TYPE_LEVEL_HIGH 0>;
166				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
167				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
168			};
169
170			pinctrl: pinctrl@fffff400 {
171				#address-cells = <1>;
172				#size-cells = <1>;
173				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
174				ranges = <0xfffff400 0xfffff400 0x600>;
175
176				atmel,mux-mask = <
177				      /*    A         B     */
178				       0xffffffff 0xffc00c3b  /* pioA */
179				       0xffffffff 0x7fff3ccf  /* pioB */
180				       0xffffffff 0x007fffff  /* pioC */
181				      >;
182
183				/* shared pinctrl settings */
184				dbgu {
185					pinctrl_dbgu: dbgu-0 {
186						atmel,pins =
187							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
188							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
189					};
190				};
191
192				usart0 {
193					pinctrl_usart0: usart0-0 {
194						atmel,pins =
195							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
196							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
197					};
198
199					pinctrl_usart0_rts: usart0_rts-0 {
200						atmel,pins =
201							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
202					};
203
204					pinctrl_usart0_cts: usart0_cts-0 {
205						atmel,pins =
206							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
207					};
208
209					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
210						atmel,pins =
211							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
212							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
213					};
214
215					pinctrl_usart0_dcd: usart0_dcd-0 {
216						atmel,pins =
217							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
218					};
219
220					pinctrl_usart0_ri: usart0_ri-0 {
221						atmel,pins =
222							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
223					};
224				};
225
226				usart1 {
227					pinctrl_usart1: usart1-0 {
228						atmel,pins =
229							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
230							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
231					};
232
233					pinctrl_usart1_rts: usart1_rts-0 {
234						atmel,pins =
235							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
236					};
237
238					pinctrl_usart1_cts: usart1_cts-0 {
239						atmel,pins =
240							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
241					};
242				};
243
244				usart2 {
245					pinctrl_usart2: usart2-0 {
246						atmel,pins =
247							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
248							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
249					};
250
251					pinctrl_usart2_rts: usart2_rts-0 {
252						atmel,pins =
253							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
254					};
255
256					pinctrl_usart2_cts: usart2_cts-0 {
257						atmel,pins =
258							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
259					};
260				};
261
262				usart3 {
263					pinctrl_usart3: usart3-0 {
264						atmel,pins =
265							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
266							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
267					};
268
269					pinctrl_usart3_rts: usart3_rts-0 {
270						atmel,pins =
271							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
272					};
273
274					pinctrl_usart3_cts: usart3_cts-0 {
275						atmel,pins =
276							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
277					};
278				};
279
280				uart0 {
281					pinctrl_uart0: uart0-0 {
282						atmel,pins =
283							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
284							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
285					};
286				};
287
288				uart1 {
289					pinctrl_uart1: uart1-0 {
290						atmel,pins =
291							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
292							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
293					};
294				};
295
296				nand {
297					pinctrl_nand_rb: nand-rb-0 {
298						atmel,pins =
299							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
300					};
301
302					pinctrl_nand_cs: nand-cs-0 {
303						atmel,pins =
304							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
305					};
306				};
307
308				macb {
309					pinctrl_macb_rmii: macb_rmii-0 {
310						atmel,pins =
311							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
312							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
313							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
314							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
315							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
316							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
317							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
318							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
319							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
320							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
321					};
322
323					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
324						atmel,pins =
325							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
326							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
327							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
328							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
329							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
330							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
331							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
332							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
333					};
334
335					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
336						atmel,pins =
337							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
338							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
339							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
340							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
341							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
342							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
343							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
344							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
345					};
346				};
347
348				mmc0 {
349					pinctrl_mmc0_clk: mmc0_clk-0 {
350						atmel,pins =
351							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
352					};
353
354					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
355						atmel,pins =
356							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
357							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
358					};
359
360					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
361						atmel,pins =
362							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
363							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
364							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
365					};
366
367					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
368						atmel,pins =
369							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
370							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
371					};
372
373					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
374						atmel,pins =
375							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
376							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
377							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
378					};
379				};
380
381				ssc0 {
382					pinctrl_ssc0_tx: ssc0_tx-0 {
383						atmel,pins =
384							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
385							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
386							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
387					};
388
389					pinctrl_ssc0_rx: ssc0_rx-0 {
390						atmel,pins =
391							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
392							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
393							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
394					};
395				};
396
397				spi0 {
398					pinctrl_spi0: spi0-0 {
399						atmel,pins =
400							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
401							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
402							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
403					};
404				};
405
406				spi1 {
407					pinctrl_spi1: spi1-0 {
408						atmel,pins =
409							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
410							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
411							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
412					};
413				};
414
415				i2c_gpio0 {
416					pinctrl_i2c_gpio0: i2c_gpio0-0 {
417						atmel,pins =
418							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
419							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
420					};
421				};
422
423				tcb0 {
424					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
425						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
426					};
427
428					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
429						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
430					};
431
432					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
433						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
434					};
435
436					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
437						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
438					};
439
440					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
441						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
442					};
443
444					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
445						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
446					};
447
448					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
449						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
450					};
451
452					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
453						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
454					};
455
456					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
457						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
458					};
459				};
460
461				tcb1 {
462					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
463						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
464					};
465
466					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
467						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
468					};
469
470					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
471						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
472					};
473
474					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
475						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
476					};
477
478					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
479						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
480					};
481
482					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
483						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
484					};
485
486					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
487						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
488					};
489
490					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
491						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
492					};
493
494					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
495						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
496					};
497				};
498
499				pioA: gpio@fffff400 {
500					compatible = "atmel,at91rm9200-gpio";
501					reg = <0xfffff400 0x200>;
502					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
503					#gpio-cells = <2>;
504					gpio-controller;
505					interrupt-controller;
506					#interrupt-cells = <2>;
507					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
508				};
509
510				pioB: gpio@fffff600 {
511					compatible = "atmel,at91rm9200-gpio";
512					reg = <0xfffff600 0x200>;
513					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
514					#gpio-cells = <2>;
515					gpio-controller;
516					interrupt-controller;
517					#interrupt-cells = <2>;
518					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
519				};
520
521				pioC: gpio@fffff800 {
522					compatible = "atmel,at91rm9200-gpio";
523					reg = <0xfffff800 0x200>;
524					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
525					#gpio-cells = <2>;
526					gpio-controller;
527					interrupt-controller;
528					#interrupt-cells = <2>;
529					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
530				};
531			};
532
533			dbgu: serial@fffff200 {
534				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
535				reg = <0xfffff200 0x200>;
536				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
537				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
538				pinctrl-names = "default";
539				pinctrl-0 = <&pinctrl_dbgu>;
540				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
541				clock-names = "usart";
542				status = "disabled";
543			};
544
545			usart0: serial@fffb0000 {
546				compatible = "atmel,at91sam9260-usart";
547				reg = <0xfffb0000 0x200>;
548				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
549				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
550				atmel,use-dma-rx;
551				atmel,use-dma-tx;
552				pinctrl-names = "default";
553				pinctrl-0 = <&pinctrl_usart0>;
554				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
555				clock-names = "usart";
556				status = "disabled";
557			};
558
559			usart1: serial@fffb4000 {
560				compatible = "atmel,at91sam9260-usart";
561				reg = <0xfffb4000 0x200>;
562				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
563				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
564				atmel,use-dma-rx;
565				atmel,use-dma-tx;
566				pinctrl-names = "default";
567				pinctrl-0 = <&pinctrl_usart1>;
568				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
569				clock-names = "usart";
570				status = "disabled";
571			};
572
573			usart2: serial@fffb8000 {
574				compatible = "atmel,at91sam9260-usart";
575				reg = <0xfffb8000 0x200>;
576				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
577				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
578				atmel,use-dma-rx;
579				atmel,use-dma-tx;
580				pinctrl-names = "default";
581				pinctrl-0 = <&pinctrl_usart2>;
582				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
583				clock-names = "usart";
584				status = "disabled";
585			};
586
587			usart3: serial@fffd0000 {
588				compatible = "atmel,at91sam9260-usart";
589				reg = <0xfffd0000 0x200>;
590				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
591				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
592				atmel,use-dma-rx;
593				atmel,use-dma-tx;
594				pinctrl-names = "default";
595				pinctrl-0 = <&pinctrl_usart3>;
596				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
597				clock-names = "usart";
598				status = "disabled";
599			};
600
601			uart0: serial@fffd4000 {
602				compatible = "atmel,at91sam9260-usart";
603				reg = <0xfffd4000 0x200>;
604				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
605				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
606				atmel,use-dma-rx;
607				atmel,use-dma-tx;
608				pinctrl-names = "default";
609				pinctrl-0 = <&pinctrl_uart0>;
610				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
611				clock-names = "usart";
612				status = "disabled";
613			};
614
615			uart1: serial@fffd8000 {
616				compatible = "atmel,at91sam9260-usart";
617				reg = <0xfffd8000 0x200>;
618				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
619				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
620				atmel,use-dma-rx;
621				atmel,use-dma-tx;
622				pinctrl-names = "default";
623				pinctrl-0 = <&pinctrl_uart1>;
624				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
625				clock-names = "usart";
626				status = "disabled";
627			};
628
629			macb0: ethernet@fffc4000 {
630				compatible = "cdns,at91sam9260-macb", "cdns,macb";
631				reg = <0xfffc4000 0x100>;
632				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
633				pinctrl-names = "default";
634				pinctrl-0 = <&pinctrl_macb_rmii>;
635				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
636				clock-names = "hclk", "pclk";
637				status = "disabled";
638			};
639
640			usb1: gadget@fffa4000 {
641				compatible = "atmel,at91sam9260-udc";
642				reg = <0xfffa4000 0x4000>;
643				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
644				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
645				clock-names = "pclk", "hclk";
646				status = "disabled";
647			};
648
649			i2c0: i2c@fffac000 {
650				compatible = "atmel,at91sam9260-i2c";
651				reg = <0xfffac000 0x100>;
652				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
653				#address-cells = <1>;
654				#size-cells = <0>;
655				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
656				status = "disabled";
657			};
658
659			mmc0: mmc@fffa8000 {
660				compatible = "atmel,hsmci";
661				reg = <0xfffa8000 0x600>;
662				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
663				#address-cells = <1>;
664				#size-cells = <0>;
665				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
666				clock-names = "mci_clk";
667				status = "disabled";
668			};
669
670			ssc0: ssc@fffbc000 {
671				compatible = "atmel,at91rm9200-ssc";
672				reg = <0xfffbc000 0x4000>;
673				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
674				pinctrl-names = "default";
675				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
676				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
677				clock-names = "pclk";
678				status = "disabled";
679			};
680
681			spi0: spi@fffc8000 {
682				#address-cells = <1>;
683				#size-cells = <0>;
684				compatible = "atmel,at91rm9200-spi";
685				reg = <0xfffc8000 0x200>;
686				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
687				pinctrl-names = "default";
688				pinctrl-0 = <&pinctrl_spi0>;
689				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
690				clock-names = "spi_clk";
691				status = "disabled";
692			};
693
694			spi1: spi@fffcc000 {
695				#address-cells = <1>;
696				#size-cells = <0>;
697				compatible = "atmel,at91rm9200-spi";
698				reg = <0xfffcc000 0x200>;
699				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
700				pinctrl-names = "default";
701				pinctrl-0 = <&pinctrl_spi1>;
702				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
703				clock-names = "spi_clk";
704				status = "disabled";
705			};
706
707			adc0: adc@fffe0000 {
708				compatible = "atmel,at91sam9260-adc";
709				reg = <0xfffe0000 0x100>;
710				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
711				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
712				clock-names = "adc_clk", "adc_op_clk";
713				atmel,adc-use-external-triggers;
714				atmel,adc-channels-used = <0xf>;
715				atmel,adc-vref = <3300>;
716				atmel,adc-startup-time = <15>;
717			};
718
719			rtc@fffffd20 {
720				compatible = "atmel,at91sam9260-rtt";
721				reg = <0xfffffd20 0x10>;
722				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
723				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
724				status = "disabled";
725			};
726
727			watchdog: watchdog@fffffd40 {
728				compatible = "atmel,at91sam9260-wdt";
729				reg = <0xfffffd40 0x10>;
730				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
731				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
732				atmel,watchdog-type = "hardware";
733				atmel,reset-type = "all";
734				atmel,dbg-halt;
735				status = "disabled";
736			};
737
738			gpbr: syscon@fffffd50 {
739				compatible = "atmel,at91sam9260-gpbr", "syscon";
740				reg = <0xfffffd50 0x10>;
741				status = "disabled";
742			};
743		};
744
745		usb0: ohci@500000 {
746			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
747			reg = <0x00500000 0x100000>;
748			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
749			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
750			clock-names = "ohci_clk", "hclk", "uhpck";
751			status = "disabled";
752		};
753
754		ebi: ebi@10000000 {
755			compatible = "atmel,at91sam9260-ebi";
756			#address-cells = <2>;
757			#size-cells = <1>;
758			atmel,smc = <&smc>;
759			atmel,matrix = <&matrix>;
760			reg = <0x10000000 0x80000000>;
761			ranges = <0x0 0x0 0x10000000 0x10000000
762				  0x1 0x0 0x20000000 0x10000000
763				  0x2 0x0 0x30000000 0x10000000
764				  0x3 0x0 0x40000000 0x10000000
765				  0x4 0x0 0x50000000 0x10000000
766				  0x5 0x0 0x60000000 0x10000000
767				  0x6 0x0 0x70000000 0x10000000
768				  0x7 0x0 0x80000000 0x10000000>;
769			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
770			status = "disabled";
771
772			nand_controller: nand-controller {
773				compatible = "atmel,at91sam9260-nand-controller";
774				#address-cells = <2>;
775				#size-cells = <1>;
776				ranges;
777				status = "disabled";
778			};
779		};
780	};
781
782	i2c_gpio0: i2c-gpio-0 {
783		compatible = "i2c-gpio";
784		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
785			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
786			>;
787		i2c-gpio,sda-open-drain;
788		i2c-gpio,scl-open-drain;
789		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
790		#address-cells = <1>;
791		#size-cells = <0>;
792		pinctrl-names = "default";
793		pinctrl-0 = <&pinctrl_i2c_gpio0>;
794		status = "disabled";
795	};
796};
797