1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0 2*724ba675SRob Herring/dts-v1/; 3*724ba675SRob Herring 4*724ba675SRob Herring#include "kirkwood-dnskw.dtsi" 5*724ba675SRob Herring 6*724ba675SRob Herring/ { 7*724ba675SRob Herring model = "D-Link DNS-325 NAS (Rev A1)"; 8*724ba675SRob Herring compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; 9*724ba675SRob Herring 10*724ba675SRob Herring memory { 11*724ba675SRob Herring device_type = "memory"; 12*724ba675SRob Herring reg = <0x00000000 0x10000000>; 13*724ba675SRob Herring }; 14*724ba675SRob Herring 15*724ba675SRob Herring chosen { 16*724ba675SRob Herring bootargs = "console=ttyS0,115200n8 earlyprintk"; 17*724ba675SRob Herring stdout-path = &uart0; 18*724ba675SRob Herring }; 19*724ba675SRob Herring 20*724ba675SRob Herring gpio-leds { 21*724ba675SRob Herring compatible = "gpio-leds"; 22*724ba675SRob Herring pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325 23*724ba675SRob Herring &pmx_led_red_left_hdd &pmx_led_red_right_hdd 24*724ba675SRob Herring &pmx_led_white_usb>; 25*724ba675SRob Herring pinctrl-names = "default"; 26*724ba675SRob Herring 27*724ba675SRob Herring white-power { 28*724ba675SRob Herring label = "dns325:white:power"; 29*724ba675SRob Herring gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; 30*724ba675SRob Herring default-state = "keep"; 31*724ba675SRob Herring }; 32*724ba675SRob Herring white-usb { 33*724ba675SRob Herring label = "dns325:white:usb"; 34*724ba675SRob Herring gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ 35*724ba675SRob Herring }; 36*724ba675SRob Herring red-l_hdd { 37*724ba675SRob Herring label = "dns325:red:l_hdd"; 38*724ba675SRob Herring gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; 39*724ba675SRob Herring }; 40*724ba675SRob Herring red-r_hdd { 41*724ba675SRob Herring label = "dns325:red:r_hdd"; 42*724ba675SRob Herring gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; 43*724ba675SRob Herring }; 44*724ba675SRob Herring red-usb { 45*724ba675SRob Herring label = "dns325:red:usb"; 46*724ba675SRob Herring gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; 47*724ba675SRob Herring }; 48*724ba675SRob Herring }; 49*724ba675SRob Herring 50*724ba675SRob Herring ocp@f1000000 { 51*724ba675SRob Herring i2c@11000 { 52*724ba675SRob Herring status = "okay"; 53*724ba675SRob Herring 54*724ba675SRob Herring lm75: lm75@48 { 55*724ba675SRob Herring compatible = "national,lm75"; 56*724ba675SRob Herring reg = <0x48>; 57*724ba675SRob Herring }; 58*724ba675SRob Herring }; 59*724ba675SRob Herring serial@12000 { 60*724ba675SRob Herring status = "okay"; 61*724ba675SRob Herring }; 62*724ba675SRob Herring }; 63*724ba675SRob Herring}; 64