1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0
2*724ba675SRob Herring#include <dt-bindings/interrupt-controller/arm-gic.h>
3*724ba675SRob Herring
4*724ba675SRob Herring/ {
5*724ba675SRob Herring	#address-cells = <2>;
6*724ba675SRob Herring	#size-cells = <2>;
7*724ba675SRob Herring	model = "Broadcom STB (bcm7445)";
8*724ba675SRob Herring	compatible = "brcm,bcm7445", "brcm,brcmstb";
9*724ba675SRob Herring	interrupt-parent = <&gic>;
10*724ba675SRob Herring
11*724ba675SRob Herring	chosen {
12*724ba675SRob Herring		bootargs = "console=ttyS0,115200 earlyprintk";
13*724ba675SRob Herring	};
14*724ba675SRob Herring
15*724ba675SRob Herring	cpus {
16*724ba675SRob Herring		#address-cells = <1>;
17*724ba675SRob Herring		#size-cells = <0>;
18*724ba675SRob Herring
19*724ba675SRob Herring		cpu@0 {
20*724ba675SRob Herring			compatible = "brcm,brahma-b15";
21*724ba675SRob Herring			device_type = "cpu";
22*724ba675SRob Herring			enable-method = "brcm,brahma-b15";
23*724ba675SRob Herring			reg = <0>;
24*724ba675SRob Herring		};
25*724ba675SRob Herring
26*724ba675SRob Herring		cpu@1 {
27*724ba675SRob Herring			compatible = "brcm,brahma-b15";
28*724ba675SRob Herring			device_type = "cpu";
29*724ba675SRob Herring			enable-method = "brcm,brahma-b15";
30*724ba675SRob Herring			reg = <1>;
31*724ba675SRob Herring		};
32*724ba675SRob Herring
33*724ba675SRob Herring		cpu@2 {
34*724ba675SRob Herring			compatible = "brcm,brahma-b15";
35*724ba675SRob Herring			device_type = "cpu";
36*724ba675SRob Herring			enable-method = "brcm,brahma-b15";
37*724ba675SRob Herring			reg = <2>;
38*724ba675SRob Herring		};
39*724ba675SRob Herring
40*724ba675SRob Herring		cpu@3 {
41*724ba675SRob Herring			compatible = "brcm,brahma-b15";
42*724ba675SRob Herring			device_type = "cpu";
43*724ba675SRob Herring			enable-method = "brcm,brahma-b15";
44*724ba675SRob Herring			reg = <3>;
45*724ba675SRob Herring		};
46*724ba675SRob Herring	};
47*724ba675SRob Herring
48*724ba675SRob Herring	gic: interrupt-controller@ffd00000 {
49*724ba675SRob Herring		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
50*724ba675SRob Herring		reg = <0x00 0xffd01000 0x00 0x1000>,
51*724ba675SRob Herring		      <0x00 0xffd02000 0x00 0x2000>,
52*724ba675SRob Herring		      <0x00 0xffd04000 0x00 0x2000>,
53*724ba675SRob Herring		      <0x00 0xffd06000 0x00 0x2000>;
54*724ba675SRob Herring		interrupt-controller;
55*724ba675SRob Herring		#interrupt-cells = <3>;
56*724ba675SRob Herring	};
57*724ba675SRob Herring
58*724ba675SRob Herring	timer {
59*724ba675SRob Herring		compatible = "arm,armv7-timer";
60*724ba675SRob Herring		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
61*724ba675SRob Herring			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
62*724ba675SRob Herring			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
63*724ba675SRob Herring			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
64*724ba675SRob Herring	};
65*724ba675SRob Herring
66*724ba675SRob Herring	rdb@f0000000 {
67*724ba675SRob Herring		#address-cells = <1>;
68*724ba675SRob Herring		#size-cells = <1>;
69*724ba675SRob Herring		compatible = "simple-bus";
70*724ba675SRob Herring		ranges = <0 0x00 0xf0000000 0x1000000>;
71*724ba675SRob Herring
72*724ba675SRob Herring		serial@40ab00 {
73*724ba675SRob Herring			compatible = "ns16550a";
74*724ba675SRob Herring			reg = <0x40ab00 0x20>;
75*724ba675SRob Herring			reg-shift = <2>;
76*724ba675SRob Herring			reg-io-width = <4>;
77*724ba675SRob Herring			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
78*724ba675SRob Herring			clock-frequency = <81000000>;
79*724ba675SRob Herring		};
80*724ba675SRob Herring
81*724ba675SRob Herring		sun_top_ctrl: syscon@404000 {
82*724ba675SRob Herring			compatible = "brcm,bcm7445-sun-top-ctrl",
83*724ba675SRob Herring				     "syscon";
84*724ba675SRob Herring			reg = <0x404000 0x51c>;
85*724ba675SRob Herring		};
86*724ba675SRob Herring
87*724ba675SRob Herring		hif_cpubiuctrl: syscon@3e2400 {
88*724ba675SRob Herring			compatible = "brcm,bcm7445-hif-cpubiuctrl",
89*724ba675SRob Herring				     "syscon";
90*724ba675SRob Herring			reg = <0x3e2400 0x5b4>;
91*724ba675SRob Herring		};
92*724ba675SRob Herring
93*724ba675SRob Herring		hif_continuation: syscon@452000 {
94*724ba675SRob Herring			compatible = "brcm,bcm7445-hif-continuation",
95*724ba675SRob Herring				     "syscon";
96*724ba675SRob Herring			reg = <0x452000 0x100>;
97*724ba675SRob Herring		};
98*724ba675SRob Herring
99*724ba675SRob Herring		irq0_intc: interrupt-controller@40a780 {
100*724ba675SRob Herring			compatible = "brcm,bcm7120-l2-intc";
101*724ba675SRob Herring			interrupt-parent = <&gic>;
102*724ba675SRob Herring			#interrupt-cells = <1>;
103*724ba675SRob Herring			reg = <0x40a780 0x8>;
104*724ba675SRob Herring			interrupt-controller;
105*724ba675SRob Herring			interrupts = <GIC_SPI 0x45 0x0>,
106*724ba675SRob Herring				     <GIC_SPI 0x43 0x0>;
107*724ba675SRob Herring			brcm,int-map-mask = <0x25c>, <0x7000000>;
108*724ba675SRob Herring			brcm,int-fwd-mask = <0x70000>;
109*724ba675SRob Herring		};
110*724ba675SRob Herring
111*724ba675SRob Herring		irq0_aon_intc: interrupt-controller@417280 {
112*724ba675SRob Herring			compatible = "brcm,bcm7120-l2-intc";
113*724ba675SRob Herring			reg = <0x417280 0x8>;
114*724ba675SRob Herring			interrupt-parent = <&gic>;
115*724ba675SRob Herring			#interrupt-cells = <1>;
116*724ba675SRob Herring			interrupt-controller;
117*724ba675SRob Herring			interrupts = <GIC_SPI 0x46 0x0>,
118*724ba675SRob Herring				     <GIC_SPI 0x44 0x0>,
119*724ba675SRob Herring				     <GIC_SPI 0x49 0x0>;
120*724ba675SRob Herring			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
121*724ba675SRob Herring			brcm,int-fwd-mask = <0x0>;
122*724ba675SRob Herring			brcm,irq-can-wake;
123*724ba675SRob Herring		};
124*724ba675SRob Herring
125*724ba675SRob Herring		hif_intr2_intc: interrupt-controller@3e1000 {
126*724ba675SRob Herring			compatible = "brcm,l2-intc";
127*724ba675SRob Herring			reg = <0x3e1000 0x30>;
128*724ba675SRob Herring			interrupt-controller;
129*724ba675SRob Herring			#interrupt-cells = <1>;
130*724ba675SRob Herring			interrupts = <GIC_SPI 0x20 0x0>;
131*724ba675SRob Herring			interrupt-parent = <&gic>;
132*724ba675SRob Herring			interrupt-names = "hif";
133*724ba675SRob Herring		};
134*724ba675SRob Herring
135*724ba675SRob Herring                aon_pm_l2_intc: interrupt-controller@410640 {
136*724ba675SRob Herring			compatible = "brcm,l2-intc";
137*724ba675SRob Herring			reg = <0x410640 0x30>;
138*724ba675SRob Herring			interrupt-controller;
139*724ba675SRob Herring			#interrupt-cells = <1>;
140*724ba675SRob Herring			interrupts = <GIC_SPI 0x40 0x0>;
141*724ba675SRob Herring			interrupt-parent = <&gic>;
142*724ba675SRob Herring			brcm,irq-can-wake;
143*724ba675SRob Herring		};
144*724ba675SRob Herring
145*724ba675SRob Herring		aon-ctrl@410000 {
146*724ba675SRob Herring			compatible = "brcm,brcmstb-aon-ctrl";
147*724ba675SRob Herring			reg = <0x410000 0x200>, <0x410200 0x400>;
148*724ba675SRob Herring			reg-names = "aon-ctrl", "aon-sram";
149*724ba675SRob Herring		};
150*724ba675SRob Herring
151*724ba675SRob Herring		nand_controller: nand-controller@3e2800 {
152*724ba675SRob Herring			status = "disabled";
153*724ba675SRob Herring			#address-cells = <1>;
154*724ba675SRob Herring			#size-cells = <0>;
155*724ba675SRob Herring			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
156*724ba675SRob Herring			reg-names = "nand", "flash-dma";
157*724ba675SRob Herring			reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
158*724ba675SRob Herring			interrupt-parent = <&hif_intr2_intc>;
159*724ba675SRob Herring			interrupts = <24>, <4>;
160*724ba675SRob Herring			interrupt-names = "nand_ctlrdy", "flash_dma_done";
161*724ba675SRob Herring		};
162*724ba675SRob Herring
163*724ba675SRob Herring		sata@45a000 {
164*724ba675SRob Herring			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
165*724ba675SRob Herring			reg-names = "ahci", "top-ctrl";
166*724ba675SRob Herring			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
167*724ba675SRob Herring			interrupts = <GIC_SPI 30 0>;
168*724ba675SRob Herring			#address-cells = <1>;
169*724ba675SRob Herring			#size-cells = <0>;
170*724ba675SRob Herring
171*724ba675SRob Herring			sata0: sata-port@0 {
172*724ba675SRob Herring				reg = <0>;
173*724ba675SRob Herring				phys = <&sata_phy0>;
174*724ba675SRob Herring			};
175*724ba675SRob Herring
176*724ba675SRob Herring			sata1: sata-port@1 {
177*724ba675SRob Herring				reg = <1>;
178*724ba675SRob Herring				phys = <&sata_phy1>;
179*724ba675SRob Herring			};
180*724ba675SRob Herring		};
181*724ba675SRob Herring
182*724ba675SRob Herring		sata_phy: sata-phy@458100 {
183*724ba675SRob Herring			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
184*724ba675SRob Herring			reg = <0x458100 0x1f00>;
185*724ba675SRob Herring			reg-names = "phy";
186*724ba675SRob Herring			#address-cells = <0x1>;
187*724ba675SRob Herring			#size-cells = <0x0>;
188*724ba675SRob Herring
189*724ba675SRob Herring			sata_phy0: sata-phy@0 {
190*724ba675SRob Herring				reg = <0>;
191*724ba675SRob Herring				#phy-cells = <0>;
192*724ba675SRob Herring			};
193*724ba675SRob Herring
194*724ba675SRob Herring			sata_phy1: sata-phy@1 {
195*724ba675SRob Herring				reg = <1>;
196*724ba675SRob Herring				#phy-cells = <0>;
197*724ba675SRob Herring			};
198*724ba675SRob Herring		};
199*724ba675SRob Herring
200*724ba675SRob Herring		upg_gio: gpio@40a700 {
201*724ba675SRob Herring			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
202*724ba675SRob Herring			reg = <0x40a700 0x80>;
203*724ba675SRob Herring			#gpio-cells = <2>;
204*724ba675SRob Herring			#interrupt-cells = <2>;
205*724ba675SRob Herring			gpio-controller;
206*724ba675SRob Herring			interrupt-controller;
207*724ba675SRob Herring			interrupt-parent = <&irq0_intc>;
208*724ba675SRob Herring			interrupts = <6>;
209*724ba675SRob Herring			brcm,gpio-bank-widths = <32 32 32 24>;
210*724ba675SRob Herring		};
211*724ba675SRob Herring
212*724ba675SRob Herring		upg_gio_aon: gpio@4172c0 {
213*724ba675SRob Herring			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
214*724ba675SRob Herring			reg = <0x4172c0 0x40>;
215*724ba675SRob Herring			#gpio-cells = <2>;
216*724ba675SRob Herring			#interrupt-cells = <2>;
217*724ba675SRob Herring			gpio-controller;
218*724ba675SRob Herring			interrupt-controller;
219*724ba675SRob Herring			interrupts-extended = <&irq0_aon_intc 0x6>,
220*724ba675SRob Herring					      <&aon_pm_l2_intc 0x5>;
221*724ba675SRob Herring			wakeup-source;
222*724ba675SRob Herring			brcm,gpio-bank-widths = <18 4>;
223*724ba675SRob Herring		};
224*724ba675SRob Herring
225*724ba675SRob Herring	};
226*724ba675SRob Herring
227*724ba675SRob Herring	memory_controllers@f1100000 {
228*724ba675SRob Herring		compatible = "simple-bus";
229*724ba675SRob Herring		ranges = <0x0 0x0 0xf1100000 0x200000>;
230*724ba675SRob Herring		#address-cells = <1>;
231*724ba675SRob Herring		#size-cells = <1>;
232*724ba675SRob Herring
233*724ba675SRob Herring		memc@0 {
234*724ba675SRob Herring			compatible = "brcm,brcmstb-memc", "simple-bus";
235*724ba675SRob Herring			#address-cells = <1>;
236*724ba675SRob Herring			#size-cells = <1>;
237*724ba675SRob Herring			ranges = <0x0 0x0 0x80000>;
238*724ba675SRob Herring
239*724ba675SRob Herring			memc-ddr@2000 {
240*724ba675SRob Herring				compatible = "brcm,brcmstb-memc-ddr";
241*724ba675SRob Herring				reg = <0x2000 0x800>;
242*724ba675SRob Herring			};
243*724ba675SRob Herring
244*724ba675SRob Herring			ddr-phy@6000 {
245*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-phy-v240.1";
246*724ba675SRob Herring				reg = <0x6000 0x21c>;
247*724ba675SRob Herring				};
248*724ba675SRob Herring
249*724ba675SRob Herring			shimphy@8000 {
250*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
251*724ba675SRob Herring				reg = <0x8000 0xe4>;
252*724ba675SRob Herring			};
253*724ba675SRob Herring		};
254*724ba675SRob Herring
255*724ba675SRob Herring		memc@80000 {
256*724ba675SRob Herring			compatible = "brcm,brcmstb-memc", "simple-bus";
257*724ba675SRob Herring			#address-cells = <1>;
258*724ba675SRob Herring			#size-cells = <1>;
259*724ba675SRob Herring			ranges = <0x0 0x80000 0x80000>;
260*724ba675SRob Herring
261*724ba675SRob Herring			memc-ddr@2000 {
262*724ba675SRob Herring				compatible = "brcm,brcmstb-memc-ddr";
263*724ba675SRob Herring				reg = <0x2000 0x800>;
264*724ba675SRob Herring			};
265*724ba675SRob Herring
266*724ba675SRob Herring			ddr-phy@6000 {
267*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-phy-v240.1";
268*724ba675SRob Herring				reg = <0x6000 0x21c>;
269*724ba675SRob Herring			};
270*724ba675SRob Herring
271*724ba675SRob Herring			shimphy@8000 {
272*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
273*724ba675SRob Herring				reg = <0x8000 0xe4>;
274*724ba675SRob Herring			};
275*724ba675SRob Herring		};
276*724ba675SRob Herring
277*724ba675SRob Herring		memc@100000 {
278*724ba675SRob Herring			compatible = "brcm,brcmstb-memc", "simple-bus";
279*724ba675SRob Herring			#address-cells = <1>;
280*724ba675SRob Herring			#size-cells = <1>;
281*724ba675SRob Herring			ranges = <0x0 0x100000 0x80000>;
282*724ba675SRob Herring
283*724ba675SRob Herring			memc-ddr@2000 {
284*724ba675SRob Herring				compatible = "brcm,brcmstb-memc-ddr";
285*724ba675SRob Herring				reg = <0x2000 0x800>;
286*724ba675SRob Herring			};
287*724ba675SRob Herring
288*724ba675SRob Herring			ddr-phy@6000 {
289*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-phy-v240.1";
290*724ba675SRob Herring				reg = <0x6000 0x21c>;
291*724ba675SRob Herring			};
292*724ba675SRob Herring
293*724ba675SRob Herring			shimphy@8000 {
294*724ba675SRob Herring				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
295*724ba675SRob Herring				reg = <0x8000 0xe4>;
296*724ba675SRob Herring			};
297*724ba675SRob Herring		};
298*724ba675SRob Herring	};
299*724ba675SRob Herring
300*724ba675SRob Herring	sram@ffe00000 {
301*724ba675SRob Herring		compatible = "brcm,boot-sram", "mmio-sram";
302*724ba675SRob Herring		reg = <0x0 0xffe00000 0x0 0x10000>;
303*724ba675SRob Herring	};
304*724ba675SRob Herring
305*724ba675SRob Herring	smpboot {
306*724ba675SRob Herring		compatible = "brcm,brcmstb-smpboot";
307*724ba675SRob Herring		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
308*724ba675SRob Herring		syscon-cont = <&hif_continuation>;
309*724ba675SRob Herring	};
310*724ba675SRob Herring
311*724ba675SRob Herring	reboot {
312*724ba675SRob Herring		compatible = "brcm,brcmstb-reboot";
313*724ba675SRob Herring		syscon = <&sun_top_ctrl 0x304 0x308>;
314*724ba675SRob Herring	};
315*724ba675SRob Herring};
316