1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14	interrupt-parent = <&gic>;
15
16	aliases {
17		serial0 = &uart0;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		cpu@0 {
29			device_type = "cpu";
30			compatible = "arm,cortex-a7";
31			reg = <0x0>;
32		};
33	};
34
35	mpcore@18310000 {
36		compatible = "simple-bus";
37		ranges = <0x00000000 0x18310000 0x00008000>;
38		#address-cells = <1>;
39		#size-cells = <1>;
40
41		gic: interrupt-controller@1000 {
42			compatible = "arm,cortex-a7-gic";
43			#interrupt-cells = <3>;
44			#address-cells = <0>;
45			interrupt-controller;
46			reg = <0x1000 0x1000>,
47			      <0x2000 0x0100>;
48		};
49	};
50
51	timer {
52		compatible = "arm,armv7-timer";
53		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
54			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
55			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
56			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
57	};
58
59	clocks {
60		#address-cells = <1>;
61		#size-cells = <1>;
62		ranges;
63
64		alp: oscillator {
65			#clock-cells = <0>;
66			compatible = "fixed-clock";
67			clock-frequency = <40000000>;
68		};
69	};
70
71	axi@18000000 {
72		compatible = "brcm,bus-axi";
73		reg = <0x18000000 0x1000>;
74		ranges = <0x00000000 0x18000000 0x00100000>;
75		#address-cells = <1>;
76		#size-cells = <1>;
77
78		#interrupt-cells = <1>;
79		interrupt-map-mask = <0x000fffff 0xffff>;
80		interrupt-map =
81			/* ChipCommon */
82			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
83
84			/* IEEE 802.11 0 */
85			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
86
87			/* PCIe Controller 0 */
88			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
89			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
90			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
91			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
92			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
93			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
94
95			/* USB 2.0 Controller */
96			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
97
98			/* Ethernet Controller 0 */
99			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
100
101			/* IEEE 802.11 1 */
102			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
103
104			/* Ethernet Controller 1 */
105			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
106
107		chipcommon: chipcommon@0 {
108			compatible = "simple-bus";
109			reg = <0x00000000 0x1000>;
110			ranges;
111
112			#address-cells = <1>;
113			#size-cells = <1>;
114
115			gpio-controller;
116			#gpio-cells = <2>;
117
118			uart0: serial@300 {
119				compatible = "ns16550a";
120				reg = <0x0300 0x100>;
121				interrupt-parent = <&gic>;
122				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
123				clocks = <&alp>;
124				status = "okay";
125			};
126		};
127
128		pcie0: pcie@2000 {
129			reg = <0x00002000 0x1000>;
130
131			#address-cells = <3>;
132			#size-cells = <2>;
133		};
134
135		usb2: usb2@4000 {
136			reg = <0x4000 0x1000>;
137			ranges;
138			#address-cells = <1>;
139			#size-cells = <1>;
140
141			ehci: usb@4000 {
142				compatible = "generic-ehci";
143				reg = <0x4000 0x1000>;
144				interrupt-parent = <&gic>;
145				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
146
147				#address-cells = <1>;
148				#size-cells = <0>;
149
150				ehci_port1: port@1 {
151					reg = <1>;
152					#trigger-source-cells = <0>;
153				};
154
155				ehci_port2: port@2 {
156					reg = <2>;
157					#trigger-source-cells = <0>;
158				};
159			};
160
161			ohci: usb@d000 {
162				compatible = "generic-ohci";
163				reg = <0xd000 0x1000>;
164				interrupt-parent = <&gic>;
165				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
166
167				#address-cells = <1>;
168				#size-cells = <0>;
169
170				ohci_port1: port@1 {
171					reg = <1>;
172					#trigger-source-cells = <0>;
173				};
174
175				ohci_port2: port@2 {
176					reg = <2>;
177					#trigger-source-cells = <0>;
178				};
179			};
180		};
181
182		gmac0: ethernet@5000 {
183			reg = <0x5000 0x1000>;
184
185			mdio {
186				#address-cells = <1>;
187				#size-cells = <0>;
188
189				switch: switch@1e {
190					compatible = "brcm,bcm53125";
191					reg = <0x1e>;
192
193					status = "disabled";
194
195					ports {
196						#address-cells = <1>;
197						#size-cells = <0>;
198
199						port@0 {
200							reg = <0>;
201						};
202
203						port@1 {
204							reg = <1>;
205						};
206
207						port@2 {
208							reg = <2>;
209						};
210
211						port@3 {
212							reg = <3>;
213						};
214
215						port@4 {
216							reg = <4>;
217						};
218
219						port@5 {
220							reg = <5>;
221							ethernet = <&gmac1>;
222
223							fixed-link {
224								speed = <1000>;
225								full-duplex;
226							};
227						};
228
229						port@8 {
230							reg = <8>;
231							ethernet = <&gmac0>;
232						};
233					};
234				};
235			};
236		};
237
238		gmac1: ethernet@b000 {
239			reg = <0xb000 0x1000>;
240		};
241
242		pmu@12000 {
243			compatible = "simple-mfd", "syscon";
244			reg = <0x00012000 0x00001000>;
245
246			ilp: ilp {
247				compatible = "brcm,bcm53573-ilp";
248				clocks = <&alp>;
249				#clock-cells = <0>;
250				clock-output-names = "ilp";
251			};
252		};
253	};
254};
255