1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "BA10 tvbox";
51	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60};
61
62&ehci0 {
63	status = "okay";
64};
65
66&ehci1 {
67	status = "okay";
68};
69
70&emac {
71	phy-handle = <&phy1>;
72	status = "okay";
73};
74
75&emac_sram {
76	status = "okay";
77};
78
79&i2c0 {
80	status = "okay";
81
82	axp209: pmic@34 {
83		compatible = "x-powers,axp209";
84		reg = <0x34>;
85		interrupts = <0>;
86
87		interrupt-controller;
88		#interrupt-cells = <1>;
89	};
90};
91
92&ir0 {
93	pinctrl-names = "default";
94	pinctrl-0 = <&ir0_rx_pins>;
95	status = "okay";
96};
97
98&mdio {
99	status = "okay";
100
101	phy1: ethernet-phy@1 {
102		reg = <1>;
103	};
104};
105
106&mmc0 {
107	vmmc-supply = <&reg_vcc3v3>;
108	bus-width = <4>;
109	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
110	status = "okay";
111};
112
113&ohci0 {
114	status = "okay";
115};
116
117&otg_sram {
118	status = "okay";
119};
120
121&reg_usb0_vbus {
122	regulator-boot-on;
123	status = "okay";
124};
125
126&reg_usb1_vbus {
127	status = "okay";
128};
129
130&reg_usb2_vbus {
131	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
132	status = "okay";
133};
134
135&uart0 {
136	pinctrl-names = "default";
137	pinctrl-0 = <&uart0_pb_pins>;
138	status = "okay";
139};
140
141&usb_otg {
142	dr_mode = "host";
143	status = "okay";
144};
145
146&usbphy {
147	usb0_vbus-supply = <&reg_usb0_vbus>;
148	usb1_vbus-supply = <&reg_usb1_vbus>;
149	usb2_vbus-supply = <&reg_usb2_vbus>;
150	status = "okay";
151};
152