1# SPDX-License-Identifier: GPL-2.0 2# Backward compatibility 3asflags-y += $(EXTRA_AFLAGS) 4ccflags-y += $(EXTRA_CFLAGS) 5cppflags-y += $(EXTRA_CPPFLAGS) 6ldflags-y += $(EXTRA_LDFLAGS) 7 8# flags that take effect in current and sub directories 9KBUILD_AFLAGS += $(subdir-asflags-y) 10KBUILD_CFLAGS += $(subdir-ccflags-y) 11KBUILD_RUSTFLAGS += $(subdir-rustflags-y) 12 13# Figure out what we need to build from the various variables 14# =========================================================================== 15 16# When an object is listed to be built compiled-in and modular, 17# only build the compiled-in version 18obj-m := $(filter-out $(obj-y),$(obj-m)) 19 20# Libraries are always collected in one lib file. 21# Filter out objects already built-in 22lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) 23 24# Subdirectories we need to descend into 25subdir-ym := $(sort $(subdir-y) $(subdir-m) \ 26 $(patsubst %/,%, $(filter %/, $(obj-y) $(obj-m)))) 27 28# Handle objects in subdirs: 29# - If we encounter foo/ in $(obj-y), replace it by foo/built-in.a and 30# foo/modules.order 31# - If we encounter foo/ in $(obj-m), replace it by foo/modules.order 32# 33# Generate modules.order to determine modorder. Unfortunately, we don't have 34# information about ordering between -y and -m subdirs. Just put -y's first. 35 36ifdef need-modorder 37obj-m := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m)) 38else 39obj-m := $(filter-out %/, $(obj-m)) 40endif 41 42ifdef need-builtin 43obj-y := $(patsubst %/, %/built-in.a, $(obj-y)) 44else 45obj-y := $(filter-out %/, $(obj-y)) 46endif 47 48# Expand $(foo-objs) $(foo-y) etc. by replacing their individuals 49suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s)))) 50# List composite targets that are constructed by combining other targets 51multi-search = $(sort $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $m))) 52# List primitive targets that are compiled from source files 53real-search = $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $(call suffix-search, $m, $2, $3), $m)) 54 55# If $(foo-objs), $(foo-y), $(foo-m), or $(foo-) exists, foo.o is a composite object 56multi-obj-y := $(call multi-search, $(obj-y), .o, -objs -y) 57multi-obj-m := $(call multi-search, $(obj-m), .o, -objs -y -m) 58multi-obj-ym := $(multi-obj-y) $(multi-obj-m) 59 60# Replace multi-part objects by their individual parts, 61# including built-in.a from subdirectories 62real-obj-y := $(call real-search, $(obj-y), .o, -objs -y) 63real-obj-m := $(call real-search, $(obj-m), .o, -objs -y -m) 64 65always-y += $(always-m) 66 67# hostprogs-always-y += foo 68# ... is a shorthand for 69# hostprogs += foo 70# always-y += foo 71hostprogs += $(hostprogs-always-y) $(hostprogs-always-m) 72always-y += $(hostprogs-always-y) $(hostprogs-always-m) 73 74# userprogs-always-y is likewise. 75userprogs += $(userprogs-always-y) $(userprogs-always-m) 76always-y += $(userprogs-always-y) $(userprogs-always-m) 77 78# DTB 79# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built 80dtb-$(CONFIG_OF_ALL_DTBS) += $(dtb-) 81 82# Composite DTB (i.e. DTB constructed by overlay) 83multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs) 84# Primitive DTB compiled from *.dts 85real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs) 86# Base DTB that overlay is applied onto (each first word of $(*-dtbs) expansion) 87base-dtb-y := $(foreach m, $(multi-dtb-y), $(firstword $(call suffix-search, $m, .dtb, -dtbs))) 88 89always-y += $(dtb-y) 90 91# Add subdir path 92 93ifneq ($(obj),.) 94extra-y := $(addprefix $(obj)/,$(extra-y)) 95always-y := $(addprefix $(obj)/,$(always-y)) 96targets := $(addprefix $(obj)/,$(targets)) 97obj-m := $(addprefix $(obj)/,$(obj-m)) 98lib-y := $(addprefix $(obj)/,$(lib-y)) 99real-obj-y := $(addprefix $(obj)/,$(real-obj-y)) 100real-obj-m := $(addprefix $(obj)/,$(real-obj-m)) 101multi-obj-m := $(addprefix $(obj)/, $(multi-obj-m)) 102multi-dtb-y := $(addprefix $(obj)/, $(multi-dtb-y)) 103real-dtb-y := $(addprefix $(obj)/, $(real-dtb-y)) 104subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) 105endif 106 107# Finds the multi-part object the current object will be linked into. 108# If the object belongs to two or more multi-part objects, list them all. 109modname-multi = $(sort $(foreach m,$(multi-obj-ym),\ 110 $(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=)))) 111 112__modname = $(or $(modname-multi),$(basetarget)) 113 114modname = $(subst $(space),:,$(__modname)) 115modfile = $(addprefix $(obj)/,$(__modname)) 116 117# target with $(obj)/ and its suffix stripped 118target-stem = $(basename $(patsubst $(obj)/%,%,$@)) 119 120# These flags are needed for modversions and compiling, so we define them here 121# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will 122# end up in (or would, if it gets compiled in) 123name-fix-token = $(subst $(comma),_,$(subst -,_,$1)) 124name-fix = $(call stringify,$(call name-fix-token,$1)) 125basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget)) 126modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \ 127 -D__KBUILD_MODNAME=kmod_$(call name-fix-token,$(modname)) 128modfile_flags = -DKBUILD_MODFILE=$(call stringify,$(modfile)) 129 130_c_flags = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \ 131 $(filter-out $(ccflags-remove-y), \ 132 $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \ 133 $(CFLAGS_$(target-stem).o)) 134_rust_flags = $(filter-out $(RUSTFLAGS_REMOVE_$(target-stem).o), \ 135 $(filter-out $(rustflags-remove-y), \ 136 $(KBUILD_RUSTFLAGS) $(rustflags-y)) \ 137 $(RUSTFLAGS_$(target-stem).o)) 138_a_flags = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \ 139 $(filter-out $(asflags-remove-y), \ 140 $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \ 141 $(AFLAGS_$(target-stem).o)) 142_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(target-stem).lds) 143 144# 145# Enable gcov profiling flags for a file, directory or for all files depending 146# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL 147# (in this order) 148# 149ifeq ($(CONFIG_GCOV_KERNEL),y) 150_c_flags += $(if $(patsubst n%,, \ 151 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \ 152 $(CFLAGS_GCOV)) 153endif 154 155# 156# Enable address sanitizer flags for kernel except some files or directories 157# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE) 158# 159ifeq ($(CONFIG_KASAN),y) 160ifneq ($(CONFIG_KASAN_HW_TAGS),y) 161_c_flags += $(if $(patsubst n%,, \ 162 $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \ 163 $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE)) 164endif 165endif 166 167ifeq ($(CONFIG_KMSAN),y) 168_c_flags += $(if $(patsubst n%,, \ 169 $(KMSAN_SANITIZE_$(basetarget).o)$(KMSAN_SANITIZE)y), \ 170 $(CFLAGS_KMSAN)) 171_c_flags += $(if $(patsubst n%,, \ 172 $(KMSAN_ENABLE_CHECKS_$(basetarget).o)$(KMSAN_ENABLE_CHECKS)y), \ 173 , -mllvm -msan-disable-checks=1) 174endif 175 176ifeq ($(CONFIG_UBSAN),y) 177_c_flags += $(if $(patsubst n%,, \ 178 $(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \ 179 $(CFLAGS_UBSAN)) 180endif 181 182ifeq ($(CONFIG_KCOV),y) 183_c_flags += $(if $(patsubst n%,, \ 184 $(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \ 185 $(CFLAGS_KCOV)) 186endif 187 188# 189# Enable KCSAN flags except some files or directories we don't want to check 190# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE) 191# 192ifeq ($(CONFIG_KCSAN),y) 193_c_flags += $(if $(patsubst n%,, \ 194 $(KCSAN_SANITIZE_$(basetarget).o)$(KCSAN_SANITIZE)y), \ 195 $(CFLAGS_KCSAN)) 196# Some uninstrumented files provide implied barriers required to avoid false 197# positives: set KCSAN_INSTRUMENT_BARRIERS for barrier instrumentation only. 198_c_flags += $(if $(patsubst n%,, \ 199 $(KCSAN_INSTRUMENT_BARRIERS_$(basetarget).o)$(KCSAN_INSTRUMENT_BARRIERS)n), \ 200 -D__KCSAN_INSTRUMENT_BARRIERS__) 201endif 202 203# $(srctree)/$(src) for including checkin headers from generated source files 204# $(objtree)/$(obj) for including generated headers from checkin source files 205ifeq ($(KBUILD_EXTMOD),) 206ifdef building_out_of_srctree 207_c_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) 208_a_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) 209_cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) 210endif 211endif 212 213part-of-module = $(if $(filter $(basename $@).o, $(real-obj-m)),y) 214quiet_modtag = $(if $(part-of-module),[M], ) 215 216modkern_cflags = \ 217 $(if $(part-of-module), \ 218 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ 219 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags)) 220 221modkern_rustflags = \ 222 $(if $(part-of-module), \ 223 $(KBUILD_RUSTFLAGS_MODULE) $(RUSTFLAGS_MODULE), \ 224 $(KBUILD_RUSTFLAGS_KERNEL) $(RUSTFLAGS_KERNEL)) 225 226modkern_aflags = $(if $(part-of-module), \ 227 $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE), \ 228 $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)) 229 230c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 231 -include $(srctree)/include/linux/compiler_types.h \ 232 $(_c_flags) $(modkern_cflags) \ 233 $(basename_flags) $(modname_flags) 234 235rust_flags = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg 236 237a_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 238 $(_a_flags) $(modkern_aflags) 239 240cpp_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 241 $(_cpp_flags) 242 243ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) 244 245DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes 246 247dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \ 248 $(addprefix -I,$(DTC_INCLUDE)) \ 249 -undef -D__DTS__ 250 251ifdef CONFIG_OBJTOOL 252 253objtool := $(objtree)/tools/objtool/objtool 254 255objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK) += --hacks=jump_label 256objtool-args-$(CONFIG_HAVE_NOINSTR_HACK) += --hacks=noinstr 257objtool-args-$(CONFIG_CALL_DEPTH_TRACKING) += --hacks=skylake 258objtool-args-$(CONFIG_X86_KERNEL_IBT) += --ibt 259objtool-args-$(CONFIG_FINEIBT) += --cfi 260objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL) += --mcount 261ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 262objtool-args-$(CONFIG_HAVE_OBJTOOL_NOP_MCOUNT) += --mnop 263endif 264objtool-args-$(CONFIG_UNWINDER_ORC) += --orc 265objtool-args-$(CONFIG_RETPOLINE) += --retpoline 266objtool-args-$(CONFIG_RETHUNK) += --rethunk 267objtool-args-$(CONFIG_SLS) += --sls 268objtool-args-$(CONFIG_STACK_VALIDATION) += --stackval 269objtool-args-$(CONFIG_HAVE_STATIC_CALL_INLINE) += --static-call 270objtool-args-$(CONFIG_HAVE_UACCESS_VALIDATION) += --uaccess 271objtool-args-$(CONFIG_GCOV_KERNEL) += --no-unreachable 272objtool-args-$(CONFIG_PREFIX_SYMBOLS) += --prefix=$(CONFIG_FUNCTION_PADDING_BYTES) 273 274objtool-args = $(objtool-args-y) \ 275 $(if $(delay-objtool), --link) \ 276 $(if $(part-of-module), --module) 277 278delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) 279 280cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool-args) $@) 281cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) 282 283endif # CONFIG_OBJTOOL 284 285# Useful for describing the dependency of composite objects 286# Usage: 287# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) 288define multi_depend 289$(foreach m, $1, \ 290 $(eval $m: \ 291 $(addprefix $(obj)/, $(call suffix-search, $(patsubst $(obj)/%,%,$m), $2, $3)))) 292endef 293 294# Copy a file 295# =========================================================================== 296# 'cp' preserves permissions. If you use it to copy a file in read-only srctree, 297# the copy would be read-only as well, leading to an error when executing the 298# rule next time. Use 'cat' instead in order to generate a writable file. 299quiet_cmd_copy = COPY $@ 300 cmd_copy = cat $< > $@ 301 302$(obj)/%: $(src)/%_shipped 303 $(call cmd,copy) 304 305# Commands useful for building a boot image 306# =========================================================================== 307# 308# Use as following: 309# 310# target: source(s) FORCE 311# $(if_changed,ld/objcopy/gzip) 312# 313# and add target to 'targets' so that we know we have to 314# read in the saved command line 315 316# Linking 317# --------------------------------------------------------------------------- 318 319quiet_cmd_ld = LD $@ 320 cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@ 321 322# Archive 323# --------------------------------------------------------------------------- 324 325quiet_cmd_ar = AR $@ 326 cmd_ar = rm -f $@; $(AR) cDPrsT $@ $(real-prereqs) 327 328# Objcopy 329# --------------------------------------------------------------------------- 330 331quiet_cmd_objcopy = OBJCOPY $@ 332cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 333 334# Gzip 335# --------------------------------------------------------------------------- 336 337quiet_cmd_gzip = GZIP $@ 338 cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@ 339 340# DTC 341# --------------------------------------------------------------------------- 342DTC ?= $(objtree)/scripts/dtc/dtc 343DTC_FLAGS += -Wno-interrupt_provider \ 344 -Wno-unique_unit_address 345 346# Disable noisy checks by default 347ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),) 348DTC_FLAGS += -Wno-unit_address_vs_reg \ 349 -Wno-avoid_unnecessary_addr_size \ 350 -Wno-alias_paths \ 351 -Wno-graph_child_address \ 352 -Wno-simple_bus_reg 353else 354DTC_FLAGS += \ 355 -Wunique_unit_address_if_enabled 356endif 357 358ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),) 359DTC_FLAGS += -Wnode_name_chars_strict \ 360 -Wproperty_name_chars_strict \ 361 -Winterrupt_provider \ 362 -Wunique_unit_address 363endif 364 365DTC_FLAGS += $(DTC_FLAGS_$(basetarget)) 366 367# Set -@ if the target is a base DTB that overlay is applied onto 368DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@) 369 370# Generate an assembly file to wrap the output of the device tree compiler 371quiet_cmd_wrap_S_dtb = WRAP $@ 372 cmd_wrap_S_dtb = { \ 373 symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*)); \ 374 echo '\#include <asm-generic/vmlinux.lds.h>'; \ 375 echo '.section .dtb.init.rodata,"a"'; \ 376 echo '.balign STRUCT_ALIGNMENT'; \ 377 echo ".global $${symbase}_begin"; \ 378 echo "$${symbase}_begin:"; \ 379 echo '.incbin "$<" '; \ 380 echo ".global $${symbase}_end"; \ 381 echo "$${symbase}_end:"; \ 382 echo '.balign STRUCT_ALIGNMENT'; \ 383 } > $@ 384 385$(obj)/%.dtb.S: $(obj)/%.dtb FORCE 386 $(call if_changed,wrap_S_dtb) 387 388$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE 389 $(call if_changed,wrap_S_dtb) 390 391quiet_cmd_dtc = DTC $@ 392cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ 393 $(DTC) -o $@ -b 0 \ 394 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ 395 -d $(depfile).dtc.tmp $(dtc-tmp) ; \ 396 cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) 397 398quiet_cmd_fdtoverlay = DTOVL $@ 399 cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs) 400 401$(multi-dtb-y): FORCE 402 $(call if_changed,fdtoverlay) 403$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs) 404 405ifneq ($(CHECK_DTBS)$(CHECK_DT_BINDING),) 406DT_CHECKER ?= dt-validate 407DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m) 408DT_BINDING_DIR := Documentation/devicetree/bindings 409DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json 410 411quiet_cmd_dtb = DTC_CHK $@ 412 cmd_dtb = $(cmd_dtc) ; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true 413else 414quiet_cmd_dtb = $(quiet_cmd_dtc) 415 cmd_dtb = $(cmd_dtc) 416endif 417 418$(obj)/%.dtb: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE 419 $(call if_changed_dep,dtb) 420 421$(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE 422 $(call if_changed_dep,dtc) 423 424$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE 425 $(call if_changed_dep,dtc) 426 427dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) 428 429# Bzip2 430# --------------------------------------------------------------------------- 431 432# Bzip2 and LZMA do not include size in file... so we have to fake that; 433# append the size as a 32-bit littleendian number as gzip does. 434size_append = printf $(shell \ 435dec_size=0; \ 436for F in $(real-prereqs); do \ 437 fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \ 438 dec_size=$$(expr $$dec_size + $$fsize); \ 439done; \ 440printf "%08x\n" $$dec_size | \ 441 sed 's/\(..\)/\1 /g' | { \ 442 read ch0 ch1 ch2 ch3; \ 443 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ 444 printf '%s%03o' '\\' $$((0x$$ch)); \ 445 done; \ 446 } \ 447) 448 449quiet_cmd_file_size = GEN $@ 450 cmd_file_size = $(size_append) > $@ 451 452quiet_cmd_bzip2 = BZIP2 $@ 453 cmd_bzip2 = cat $(real-prereqs) | $(KBZIP2) -9 > $@ 454 455quiet_cmd_bzip2_with_size = BZIP2 $@ 456 cmd_bzip2_with_size = { cat $(real-prereqs) | $(KBZIP2) -9; $(size_append); } > $@ 457 458# Lzma 459# --------------------------------------------------------------------------- 460 461quiet_cmd_lzma = LZMA $@ 462 cmd_lzma = cat $(real-prereqs) | $(LZMA) -9 > $@ 463 464quiet_cmd_lzma_with_size = LZMA $@ 465 cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ 466 467quiet_cmd_lzo = LZO $@ 468 cmd_lzo = cat $(real-prereqs) | $(KLZOP) -9 > $@ 469 470quiet_cmd_lzo_with_size = LZO $@ 471 cmd_lzo_with_size = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ 472 473quiet_cmd_lz4 = LZ4 $@ 474 cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout > $@ 475 476quiet_cmd_lz4_with_size = LZ4 $@ 477 cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ 478 $(size_append); } > $@ 479 480# U-Boot mkimage 481# --------------------------------------------------------------------------- 482 483MKIMAGE := $(srctree)/scripts/mkuboot.sh 484 485# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces 486# the number of overrides in arch makefiles 487UIMAGE_ARCH ?= $(SRCARCH) 488UIMAGE_COMPRESSION ?= $(or $(2),none) 489UIMAGE_OPTS-y ?= 490UIMAGE_TYPE ?= kernel 491UIMAGE_LOADADDR ?= arch_must_set_this 492UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) 493UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)' 494 495quiet_cmd_uimage = UIMAGE $@ 496 cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ 497 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ 498 -T $(UIMAGE_TYPE) \ 499 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ 500 -n $(UIMAGE_NAME) -d $< $@ 501 502# XZ 503# --------------------------------------------------------------------------- 504# Use xzkern to compress the kernel image and xzmisc to compress other things. 505# 506# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage 507# of the kernel decompressor. A BCJ filter is used if it is available for 508# the target architecture. xzkern also appends uncompressed size of the data 509# using size_append. The .xz format has the size information available at 510# the end of the file too, but it's in more complex format and it's good to 511# avoid changing the part of the boot code that reads the uncompressed size. 512# Note that the bytes added by size_append will make the xz tool think that 513# the file is corrupt. This is expected. 514# 515# xzmisc doesn't use size_append, so it can be used to create normal .xz 516# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very 517# big dictionary would increase the memory usage too much in the multi-call 518# decompression mode. A BCJ filter isn't used either. 519quiet_cmd_xzkern = XZKERN $@ 520 cmd_xzkern = cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh > $@ 521 522quiet_cmd_xzkern_with_size = XZKERN $@ 523 cmd_xzkern_with_size = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \ 524 $(size_append); } > $@ 525 526quiet_cmd_xzmisc = XZMISC $@ 527 cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@ 528 529# ZSTD 530# --------------------------------------------------------------------------- 531# Appends the uncompressed size of the data using size_append. The .zst 532# format has the size information available at the beginning of the file too, 533# but it's in a more complex format and it's good to avoid changing the part 534# of the boot code that reads the uncompressed size. 535# 536# Note that the bytes added by size_append will make the zstd tool think that 537# the file is corrupt. This is expected. 538# 539# zstd uses a maximum window size of 8 MB. zstd22 uses a maximum window size of 540# 128 MB. zstd22 is used for kernel compression because it is decompressed in a 541# single pass, so zstd doesn't need to allocate a window buffer. When streaming 542# decompression is used, like initramfs decompression, zstd22 should likely not 543# be used because it would require zstd to allocate a 128 MB buffer. 544 545quiet_cmd_zstd = ZSTD $@ 546 cmd_zstd = cat $(real-prereqs) | $(ZSTD) -19 > $@ 547 548quiet_cmd_zstd22 = ZSTD22 $@ 549 cmd_zstd22 = cat $(real-prereqs) | $(ZSTD) -22 --ultra > $@ 550 551quiet_cmd_zstd22_with_size = ZSTD22 $@ 552 cmd_zstd22_with_size = { cat $(real-prereqs) | $(ZSTD) -22 --ultra; $(size_append); } > $@ 553 554# ASM offsets 555# --------------------------------------------------------------------------- 556 557# Default sed regexp - multiline due to syntax constraints 558# 559# Use [:space:] because LLVM's integrated assembler inserts <tab> around 560# the .ascii directive whereas GCC keeps the <space> as-is. 561define sed-offsets 562 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \ 563 /^->/{s:->#\(.*\):/* \1 */:; \ 564 s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ 565 s:->::; p;}' 566endef 567 568# Use filechk to avoid rebuilds when a header changes, but the resulting file 569# does not 570define filechk_offsets 571 echo "#ifndef $2"; \ 572 echo "#define $2"; \ 573 echo "/*"; \ 574 echo " * DO NOT MODIFY."; \ 575 echo " *"; \ 576 echo " * This file was generated by Kbuild"; \ 577 echo " */"; \ 578 echo ""; \ 579 sed -ne $(sed-offsets) < $<; \ 580 echo ""; \ 581 echo "#endif" 582endef 583