1# Backward compatibility 2asflags-y += $(EXTRA_AFLAGS) 3ccflags-y += $(EXTRA_CFLAGS) 4cppflags-y += $(EXTRA_CPPFLAGS) 5ldflags-y += $(EXTRA_LDFLAGS) 6 7# 8# flags that take effect in sub directories 9export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y) 10export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y) 11 12# Figure out what we need to build from the various variables 13# =========================================================================== 14 15# When an object is listed to be built compiled-in and modular, 16# only build the compiled-in version 17 18obj-m := $(filter-out $(obj-y),$(obj-m)) 19 20# Libraries are always collected in one lib file. 21# Filter out objects already built-in 22 23lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) 24 25 26# Handle objects in subdirs 27# --------------------------------------------------------------------------- 28# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o 29# and add the directory to the list of dirs to descend into: $(subdir-y) 30# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 31# and add the directory to the list of dirs to descend into: $(subdir-m) 32 33# Determine modorder. 34# Unfortunately, we don't have information about ordering between -y 35# and -m subdirs. Just put -y's first. 36modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko)) 37 38__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) 39subdir-y += $(__subdir-y) 40__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) 41subdir-m += $(__subdir-m) 42obj-y := $(patsubst %/, %/built-in.o, $(obj-y)) 43obj-m := $(filter-out %/, $(obj-m)) 44 45# Subdirectories we need to descend into 46 47subdir-ym := $(sort $(subdir-y) $(subdir-m)) 48 49# if $(foo-objs) exists, foo.o is a composite object 50multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) 51multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) 52multi-used := $(multi-used-y) $(multi-used-m) 53single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m))) 54 55# Build list of the parts of our composite objects, our composite 56# objects depend on those (obviously) 57multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y))) 58multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y))) 59multi-objs := $(multi-objs-y) $(multi-objs-m) 60 61# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to 62# tell kbuild to descend 63subdir-obj-y := $(filter %/built-in.o, $(obj-y)) 64 65# $(obj-dirs) is a list of directories that contain object files 66obj-dirs := $(dir $(multi-objs) $(subdir-obj-y)) 67 68# Replace multi-part objects by their individual parts, look at local dir only 69real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y) 70real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) 71 72# Add subdir path 73 74extra-y := $(addprefix $(obj)/,$(extra-y)) 75always := $(addprefix $(obj)/,$(always)) 76targets := $(addprefix $(obj)/,$(targets)) 77modorder := $(addprefix $(obj)/,$(modorder)) 78obj-y := $(addprefix $(obj)/,$(obj-y)) 79obj-m := $(addprefix $(obj)/,$(obj-m)) 80lib-y := $(addprefix $(obj)/,$(lib-y)) 81subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y)) 82real-objs-y := $(addprefix $(obj)/,$(real-objs-y)) 83real-objs-m := $(addprefix $(obj)/,$(real-objs-m)) 84single-used-m := $(addprefix $(obj)/,$(single-used-m)) 85multi-used-y := $(addprefix $(obj)/,$(multi-used-y)) 86multi-used-m := $(addprefix $(obj)/,$(multi-used-m)) 87multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y)) 88multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m)) 89subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) 90obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) 91 92# These flags are needed for modversions and compiling, so we define them here 93# already 94# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 95# end up in (or would, if it gets compiled in) 96# Note: Files that end up in two or more modules are compiled without the 97# KBUILD_MODNAME definition. The reason is that any made-up name would 98# differ in different configs. 99name-fix = $(subst $(comma),_,$(subst -,_,$1)) 100basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" 101modname_flags = $(if $(filter 1,$(words $(modname))),\ 102 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") 103 104orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ 105 $(ccflags-y) $(CFLAGS_$(basetarget).o) 106_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) 107_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ 108 $(asflags-y) $(AFLAGS_$(basetarget).o) 109_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) 110 111# 112# Enable gcov profiling flags for a file, directory or for all files depending 113# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL 114# (in this order) 115# 116ifeq ($(CONFIG_GCOV_KERNEL),y) 117_c_flags += $(if $(patsubst n%,, \ 118 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \ 119 $(CFLAGS_GCOV)) 120endif 121 122# If building the kernel in a separate objtree expand all occurrences 123# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). 124 125ifeq ($(KBUILD_SRC),) 126__c_flags = $(_c_flags) 127__a_flags = $(_a_flags) 128__cpp_flags = $(_cpp_flags) 129else 130 131# -I$(obj) locates generated .h files 132# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files 133# and locates generated .h files 134# FIXME: Replace both with specific CFLAGS* statements in the makefiles 135__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags) 136__a_flags = $(call flags,_a_flags) 137__cpp_flags = $(call flags,_cpp_flags) 138endif 139 140c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 141 $(__c_flags) $(modkern_cflags) \ 142 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) 143 144a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 145 $(__a_flags) $(modkern_aflags) 146 147cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 148 $(__cpp_flags) 149 150ld_flags = $(LDFLAGS) $(ldflags-y) 151 152dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \ 153 -I$(srctree)/arch/$(SRCARCH)/boot/dts \ 154 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \ 155 -undef -D__DTS__ 156 157# Finds the multi-part object the current object will be linked into 158modname-multi = $(sort $(foreach m,$(multi-used),\ 159 $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=)))) 160 161ifdef REGENERATE_PARSERS 162 163# GPERF 164# --------------------------------------------------------------------------- 165quiet_cmd_gperf = GPERF $@ 166 cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $< 167 168.PRECIOUS: $(src)/%.hash.c_shipped 169$(src)/%.hash.c_shipped: $(src)/%.gperf 170 $(call cmd,gperf) 171 172# LEX 173# --------------------------------------------------------------------------- 174LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy) 175 176quiet_cmd_flex = LEX $@ 177 cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $< 178 179.PRECIOUS: $(src)/%.lex.c_shipped 180$(src)/%.lex.c_shipped: $(src)/%.l 181 $(call cmd,flex) 182 183# YACC 184# --------------------------------------------------------------------------- 185YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy) 186 187quiet_cmd_bison = YACC $@ 188 cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $< 189 190.PRECIOUS: $(src)/%.tab.c_shipped 191$(src)/%.tab.c_shipped: $(src)/%.y 192 $(call cmd,bison) 193 194quiet_cmd_bison_h = YACC $@ 195 cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $< 196 197.PRECIOUS: $(src)/%.tab.h_shipped 198$(src)/%.tab.h_shipped: $(src)/%.y 199 $(call cmd,bison_h) 200 201endif 202 203# Shipped files 204# =========================================================================== 205 206quiet_cmd_shipped = SHIPPED $@ 207cmd_shipped = cat $< > $@ 208 209$(obj)/%: $(src)/%_shipped 210 $(call cmd,shipped) 211 212# Commands useful for building a boot image 213# =========================================================================== 214# 215# Use as following: 216# 217# target: source(s) FORCE 218# $(if_changed,ld/objcopy/gzip) 219# 220# and add target to extra-y so that we know we have to 221# read in the saved command line 222 223# Linking 224# --------------------------------------------------------------------------- 225 226quiet_cmd_ld = LD $@ 227cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \ 228 $(filter-out FORCE,$^) -o $@ 229 230# Objcopy 231# --------------------------------------------------------------------------- 232 233quiet_cmd_objcopy = OBJCOPY $@ 234cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 235 236# Gzip 237# --------------------------------------------------------------------------- 238 239quiet_cmd_gzip = GZIP $@ 240cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \ 241 (rm -f $@ ; false) 242 243# DTC 244# --------------------------------------------------------------------------- 245 246# Generate an assembly file to wrap the output of the device tree compiler 247quiet_cmd_dt_S_dtb= DTB $@ 248cmd_dt_S_dtb= \ 249( \ 250 echo '\#include <asm-generic/vmlinux.lds.h>'; \ 251 echo '.section .dtb.init.rodata,"a"'; \ 252 echo '.balign STRUCT_ALIGNMENT'; \ 253 echo '.global __dtb_$(*F)_begin'; \ 254 echo '__dtb_$(*F)_begin:'; \ 255 echo '.incbin "$<" '; \ 256 echo '__dtb_$(*F)_end:'; \ 257 echo '.global __dtb_$(*F)_end'; \ 258 echo '.balign STRUCT_ALIGNMENT'; \ 259) > $@ 260 261$(obj)/%.dtb.S: $(obj)/%.dtb 262 $(call cmd,dt_S_dtb) 263 264quiet_cmd_dtc = DTC $@ 265cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ 266 $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ 267 -i $(dir $<) $(DTC_FLAGS) \ 268 -d $(depfile).dtc $(dtc-tmp) ; \ 269 cat $(depfile).pre $(depfile).dtc > $(depfile) 270 271$(obj)/%.dtb: $(src)/%.dts FORCE 272 $(call if_changed_dep,dtc) 273 274dtc-tmp = $(subst $(comma),_,$(dot-target).dts) 275 276# Bzip2 277# --------------------------------------------------------------------------- 278 279# Bzip2 and LZMA do not include size in file... so we have to fake that; 280# append the size as a 32-bit littleendian number as gzip does. 281size_append = printf $(shell \ 282dec_size=0; \ 283for F in $1; do \ 284 fsize=$$(stat -c "%s" $$F); \ 285 dec_size=$$(expr $$dec_size + $$fsize); \ 286done; \ 287printf "%08x\n" $$dec_size | \ 288 sed 's/\(..\)/\1 /g' | { \ 289 read ch0 ch1 ch2 ch3; \ 290 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ 291 printf '%s%03o' '\\' $$((0x$$ch)); \ 292 done; \ 293 } \ 294) 295 296quiet_cmd_bzip2 = BZIP2 $@ 297cmd_bzip2 = (cat $(filter-out FORCE,$^) | \ 298 bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 299 (rm -f $@ ; false) 300 301# Lzma 302# --------------------------------------------------------------------------- 303 304quiet_cmd_lzma = LZMA $@ 305cmd_lzma = (cat $(filter-out FORCE,$^) | \ 306 lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 307 (rm -f $@ ; false) 308 309quiet_cmd_lzo = LZO $@ 310cmd_lzo = (cat $(filter-out FORCE,$^) | \ 311 lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 312 (rm -f $@ ; false) 313 314# U-Boot mkimage 315# --------------------------------------------------------------------------- 316 317MKIMAGE := $(srctree)/scripts/mkuboot.sh 318 319# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces 320# the number of overrides in arch makefiles 321UIMAGE_ARCH ?= $(SRCARCH) 322UIMAGE_COMPRESSION ?= $(if $(2),$(2),none) 323UIMAGE_OPTS-y ?= 324UIMAGE_TYPE ?= kernel 325UIMAGE_LOADADDR ?= arch_must_set_this 326UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) 327UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)' 328UIMAGE_IN ?= $< 329UIMAGE_OUT ?= $@ 330 331quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT) 332 cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ 333 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ 334 -T $(UIMAGE_TYPE) \ 335 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ 336 -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT) 337 338# XZ 339# --------------------------------------------------------------------------- 340# Use xzkern to compress the kernel image and xzmisc to compress other things. 341# 342# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage 343# of the kernel decompressor. A BCJ filter is used if it is available for 344# the target architecture. xzkern also appends uncompressed size of the data 345# using size_append. The .xz format has the size information available at 346# the end of the file too, but it's in more complex format and it's good to 347# avoid changing the part of the boot code that reads the uncompressed size. 348# Note that the bytes added by size_append will make the xz tool think that 349# the file is corrupt. This is expected. 350# 351# xzmisc doesn't use size_append, so it can be used to create normal .xz 352# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very 353# big dictionary would increase the memory usage too much in the multi-call 354# decompression mode. A BCJ filter isn't used either. 355quiet_cmd_xzkern = XZKERN $@ 356cmd_xzkern = (cat $(filter-out FORCE,$^) | \ 357 sh $(srctree)/scripts/xz_wrap.sh && \ 358 $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 359 (rm -f $@ ; false) 360 361quiet_cmd_xzmisc = XZMISC $@ 362cmd_xzmisc = (cat $(filter-out FORCE,$^) | \ 363 xz --check=crc32 --lzma2=dict=1MiB) > $@ || \ 364 (rm -f $@ ; false) 365 366# misc stuff 367# --------------------------------------------------------------------------- 368quote:=" 369