xref: /openbmc/linux/scripts/Makefile.build (revision a8a28aff) 
1# ==========================================================================
2# Building
3# ==========================================================================
4
5src := $(obj)
6
7PHONY := __build
8__build:
9
10# Init all relevant variables used in kbuild files so
11# 1) they have correct type
12# 2) they do not inherit any value from the environment
13obj-y :=
14obj-m :=
15lib-y :=
16lib-m :=
17always :=
18targets :=
19subdir-y :=
20subdir-m :=
21EXTRA_AFLAGS   :=
22EXTRA_CFLAGS   :=
23EXTRA_CPPFLAGS :=
24EXTRA_LDFLAGS  :=
25asflags-y  :=
26ccflags-y  :=
27cppflags-y :=
28ldflags-y  :=
29
30subdir-asflags-y :=
31subdir-ccflags-y :=
32
33# Read auto.conf if it exists, otherwise ignore
34-include include/config/auto.conf
35
36include scripts/Kbuild.include
37
38# For backward compatibility check that these variables do not change
39save-cflags := $(CFLAGS)
40
41# The filename Kbuild has precedence over Makefile
42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44include $(kbuild-file)
45
46# If the save-* variables changed error out
47ifeq ($(KBUILD_NOPEDANTIC),)
48        ifneq ("$(save-cflags)","$(CFLAGS)")
49                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
50        endif
51endif
52
53include scripts/Makefile.lib
54
55ifdef host-progs
56ifneq ($(hostprogs-y),$(host-progs))
57$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
58hostprogs-y += $(host-progs)
59endif
60endif
61
62# Do not include host rules unless needed
63ifneq ($(hostprogs-y)$(hostprogs-m),)
64include scripts/Makefile.host
65endif
66
67ifneq ($(KBUILD_SRC),)
68# Create output directory if not already present
69_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
70
71# Create directories for object files if directory does not exist
72# Needed when obj-y := dir/file.o syntax is used
73_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
74endif
75
76ifndef obj
77$(warning kbuild: Makefile.build is included improperly)
78endif
79
80# ===========================================================================
81
82ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
83lib-target := $(obj)/lib.a
84endif
85
86ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
87builtin-target := $(obj)/built-in.o
88endif
89
90modorder-target := $(obj)/modules.order
91
92# We keep a list of all modules in $(MODVERDIR)
93
94__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
95	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
96	 $(subdir-ym) $(always)
97	@:
98
99# Linus' kernel sanity checking tool
100ifneq ($(KBUILD_CHECKSRC),0)
101  ifeq ($(KBUILD_CHECKSRC),2)
102    quiet_cmd_force_checksrc = CHECK   $<
103          cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
104  else
105      quiet_cmd_checksrc     = CHECK   $<
106            cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
107  endif
108endif
109
110# Do section mismatch analysis for each module/built-in.o
111ifdef CONFIG_DEBUG_SECTION_MISMATCH
112  cmd_secanalysis = ; scripts/mod/modpost $@
113endif
114
115# Compile C sources (.c)
116# ---------------------------------------------------------------------------
117
118# Default is built-in, unless we know otherwise
119modkern_cflags =                                          \
120	$(if $(part-of-module),                           \
121		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
122		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
123quiet_modtag := $(empty)   $(empty)
124
125$(real-objs-m)        : part-of-module := y
126$(real-objs-m:.o=.i)  : part-of-module := y
127$(real-objs-m:.o=.s)  : part-of-module := y
128$(real-objs-m:.o=.lst): part-of-module := y
129
130$(real-objs-m)        : quiet_modtag := [M]
131$(real-objs-m:.o=.i)  : quiet_modtag := [M]
132$(real-objs-m:.o=.s)  : quiet_modtag := [M]
133$(real-objs-m:.o=.lst): quiet_modtag := [M]
134
135$(obj-m)              : quiet_modtag := [M]
136
137# Default for not multi-part modules
138modname = $(basetarget)
139
140$(multi-objs-m)         : modname = $(modname-multi)
141$(multi-objs-m:.o=.i)   : modname = $(modname-multi)
142$(multi-objs-m:.o=.s)   : modname = $(modname-multi)
143$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
144$(multi-objs-y)         : modname = $(modname-multi)
145$(multi-objs-y:.o=.i)   : modname = $(modname-multi)
146$(multi-objs-y:.o=.s)   : modname = $(modname-multi)
147$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
148
149quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
150cmd_cc_s_c       = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
151
152$(obj)/%.s: $(src)/%.c FORCE
153	$(call if_changed_dep,cc_s_c)
154
155quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
156cmd_cc_i_c       = $(CPP) $(c_flags)   -o $@ $<
157
158$(obj)/%.i: $(src)/%.c FORCE
159	$(call if_changed_dep,cc_i_c)
160
161cmd_gensymtypes =                                                           \
162    $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
163    $(GENKSYMS) $(if $(1), -T $(2))                                         \
164     $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
165     $(if $(KBUILD_PRESERVE),-p)                                            \
166     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
167
168quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
169cmd_cc_symtypes_c =                                                         \
170    set -e;                                                                 \
171    $(call cmd_gensymtypes,true,$@) >/dev/null;                             \
172    test -s $@ || rm -f $@
173
174$(obj)/%.symtypes : $(src)/%.c FORCE
175	$(call cmd,cc_symtypes_c)
176
177# C (.c) files
178# The C file is compiled and updated dependency information is generated.
179# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
180
181quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
182
183ifndef CONFIG_MODVERSIONS
184cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
185
186else
187# When module versioning is enabled the following steps are executed:
188# o compile a .tmp_<file>.o from <file>.c
189# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
190#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
191#   are done.
192# o otherwise, we calculate symbol versions using the good old
193#   genksyms on the preprocessed source and postprocess them in a way
194#   that they are usable as a linker script
195# o generate <file>.o from .tmp_<file>.o using the linker to
196#   replace the unresolved symbols __crc_exported_symbol with
197#   the actual value of the checksum generated by genksyms
198
199cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
200cmd_modversions =								\
201	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
202		$(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
203		    > $(@D)/.tmp_$(@F:.o=.ver);					\
204										\
205		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 			\
206			-T $(@D)/.tmp_$(@F:.o=.ver);				\
207		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
208	else									\
209		mv -f $(@D)/.tmp_$(@F) $@;					\
210	fi;
211endif
212
213ifdef CONFIG_FTRACE_MCOUNT_RECORD
214ifdef BUILD_C_RECORDMCOUNT
215ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
216  RECORDMCOUNT_FLAGS = -w
217endif
218# Due to recursion, we must skip empty.o.
219# The empty.o file is created in the make process in order to determine
220#  the target endianness and word size. It is made before all other C
221#  files, including recordmcount.
222sub_cmd_record_mcount =					\
223	if [ $(@) != "scripts/mod/empty.o" ]; then	\
224		$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";	\
225	fi;
226recordmcount_source := $(srctree)/scripts/recordmcount.c \
227		    $(srctree)/scripts/recordmcount.h
228else
229sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
230	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
231	"$(if $(CONFIG_64BIT),64,32)" \
232	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
233	"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
234	"$(if $(part-of-module),1,0)" "$(@)";
235recordmcount_source := $(srctree)/scripts/recordmcount.pl
236endif
237cmd_record_mcount = 						\
238	if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then	\
239		$(sub_cmd_record_mcount)			\
240	fi;
241endif
242
243define rule_cc_o_c
244	$(call echo-cmd,checksrc) $(cmd_checksrc)			  \
245	$(call echo-cmd,cc_o_c) $(cmd_cc_o_c);				  \
246	$(cmd_modversions)						  \
247	$(call echo-cmd,record_mcount)					  \
248	$(cmd_record_mcount)						  \
249	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
250	                                              $(dot-target).tmp;  \
251	rm -f $(depfile);						  \
252	mv -f $(dot-target).tmp $(dot-target).cmd
253endef
254
255# Built-in and composite module parts
256$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
257	$(call cmd,force_checksrc)
258	$(call if_changed_rule,cc_o_c)
259
260# Single-part modules are special since we need to mark them in $(MODVERDIR)
261
262$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
263	$(call cmd,force_checksrc)
264	$(call if_changed_rule,cc_o_c)
265	@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
266
267quiet_cmd_cc_lst_c = MKLST   $@
268      cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
269		     $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
270				     System.map $(OBJDUMP) > $@
271
272$(obj)/%.lst: $(src)/%.c FORCE
273	$(call if_changed_dep,cc_lst_c)
274
275# Compile assembler sources (.S)
276# ---------------------------------------------------------------------------
277
278modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
279
280$(real-objs-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
281$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
282
283quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
284cmd_as_s_S       = $(CPP) $(a_flags)   -o $@ $<
285
286$(obj)/%.s: $(src)/%.S FORCE
287	$(call if_changed_dep,as_s_S)
288
289quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
290cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
291
292$(obj)/%.o: $(src)/%.S FORCE
293	$(call if_changed_dep,as_o_S)
294
295targets += $(real-objs-y) $(real-objs-m) $(lib-y)
296targets += $(extra-y) $(MAKECMDGOALS) $(always)
297
298# Linker scripts preprocessor (.lds.S -> .lds)
299# ---------------------------------------------------------------------------
300quiet_cmd_cpp_lds_S = LDS     $@
301      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
302	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
303
304$(obj)/%.lds: $(src)/%.lds.S FORCE
305	$(call if_changed_dep,cpp_lds_S)
306
307# ASN.1 grammar
308# ---------------------------------------------------------------------------
309quiet_cmd_asn1_compiler = ASN.1   $@
310      cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
311				$(subst .h,.c,$@) $(subst .c,.h,$@)
312
313.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h
314
315$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
316	$(call cmd,asn1_compiler)
317
318# Build the compiled-in targets
319# ---------------------------------------------------------------------------
320
321# To build objects in subdirs, we need to descend into the directories
322$(sort $(subdir-obj-y)): $(subdir-ym) ;
323
324#
325# Rule to compile a set of .o files into one .o file
326#
327ifdef builtin-target
328quiet_cmd_link_o_target = LD      $@
329# If the list of objects to link is empty, just create an empty built-in.o
330cmd_link_o_target = $(if $(strip $(obj-y)),\
331		      $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
332		      $(cmd_secanalysis),\
333		      rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@)
334
335$(builtin-target): $(obj-y) FORCE
336	$(call if_changed,link_o_target)
337
338targets += $(builtin-target)
339endif # builtin-target
340
341#
342# Rule to create modules.order file
343#
344# Create commands to either record .ko file or cat modules.order from
345# a subdirectory
346modorder-cmds =						\
347	$(foreach m, $(modorder),			\
348		$(if $(filter %/modules.order, $m),	\
349			cat $m;, echo kernel/$m;))
350
351$(modorder-target): $(subdir-ym) FORCE
352	$(Q)(cat /dev/null; $(modorder-cmds)) > $@
353
354#
355# Rule to compile a set of .o files into one .a file
356#
357ifdef lib-target
358quiet_cmd_link_l_target = AR      $@
359cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y)
360
361$(lib-target): $(lib-y) FORCE
362	$(call if_changed,link_l_target)
363
364targets += $(lib-target)
365endif
366
367#
368# Rule to link composite objects
369#
370#  Composite objects are specified in kbuild makefile as follows:
371#    <composite-object>-objs := <list of .o files>
372#  or
373#    <composite-object>-y    := <list of .o files>
374link_multi_deps =                     \
375$(filter $(addprefix $(obj)/,         \
376$($(subst $(obj)/,,$(@:.o=-objs)))    \
377$($(subst $(obj)/,,$(@:.o=-y)))), $^)
378
379quiet_cmd_link_multi-y = LD      $@
380cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
381
382quiet_cmd_link_multi-m = LD [M]  $@
383cmd_link_multi-m = $(cmd_link_multi-y)
384
385# We would rather have a list of rules like
386# 	foo.o: $(foo-objs)
387# but that's not so easy, so we rather make all composite objects depend
388# on the set of all their parts
389$(multi-used-y) : %.o: $(multi-objs-y) FORCE
390	$(call if_changed,link_multi-y)
391
392$(multi-used-m) : %.o: $(multi-objs-m) FORCE
393	$(call if_changed,link_multi-m)
394	@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
395
396targets += $(multi-used-y) $(multi-used-m)
397
398
399# Descending
400# ---------------------------------------------------------------------------
401
402PHONY += $(subdir-ym)
403$(subdir-ym):
404	$(Q)$(MAKE) $(build)=$@
405
406# Add FORCE to the prequisites of a target to force it to be always rebuilt.
407# ---------------------------------------------------------------------------
408
409PHONY += FORCE
410
411FORCE:
412
413# Read all saved command lines and dependencies for the $(targets) we
414# may be building above, using $(if_changed{,_dep}). As an
415# optimization, we don't need to read them if the target does not
416# exist, we will rebuild anyway in that case.
417
418targets := $(wildcard $(sort $(targets)))
419cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
420
421ifneq ($(cmd_files),)
422  include $(cmd_files)
423endif
424
425# Declare the contents of the .PHONY variable as phony.  We keep that
426# information in a variable se we can use it in if_changed and friends.
427
428.PHONY: $(PHONY)
429