1# ========================================================================== 2# Building 3# ========================================================================== 4 5src := $(obj) 6 7PHONY := __build 8__build: 9 10# Init all relevant variables used in kbuild files so 11# 1) they have correct type 12# 2) they do not inherit any value from the environment 13obj-y := 14obj-m := 15lib-y := 16lib-m := 17always := 18targets := 19subdir-y := 20subdir-m := 21EXTRA_AFLAGS := 22EXTRA_CFLAGS := 23EXTRA_CPPFLAGS := 24EXTRA_LDFLAGS := 25asflags-y := 26ccflags-y := 27cppflags-y := 28ldflags-y := 29 30subdir-asflags-y := 31subdir-ccflags-y := 32 33# Read auto.conf if it exists, otherwise ignore 34-include include/config/auto.conf 35 36include scripts/Kbuild.include 37 38# For backward compatibility check that these variables do not change 39save-cflags := $(CFLAGS) 40 41# The filename Kbuild has precedence over Makefile 42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) 43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) 44include $(kbuild-file) 45 46# If the save-* variables changed error out 47ifeq ($(KBUILD_NOPEDANTIC),) 48 ifneq ("$(save-cflags)","$(CFLAGS)") 49 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y) 50 endif 51endif 52 53include scripts/Makefile.lib 54 55ifdef host-progs 56ifneq ($(hostprogs-y),$(host-progs)) 57$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!) 58hostprogs-y += $(host-progs) 59endif 60endif 61 62# Do not include host rules unless needed 63ifneq ($(hostprogs-y)$(hostprogs-m),) 64include scripts/Makefile.host 65endif 66 67ifneq ($(KBUILD_SRC),) 68# Create output directory if not already present 69_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 70 71# Create directories for object files if directory does not exist 72# Needed when obj-y := dir/file.o syntax is used 73_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) 74endif 75 76ifndef obj 77$(warning kbuild: Makefile.build is included improperly) 78endif 79 80# =========================================================================== 81 82ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) 83lib-target := $(obj)/lib.a 84endif 85 86ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) 87builtin-target := $(obj)/built-in.o 88endif 89 90modorder-target := $(obj)/modules.order 91 92# We keep a list of all modules in $(MODVERDIR) 93 94__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ 95 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ 96 $(subdir-ym) $(always) 97 @: 98 99# Linus' kernel sanity checking tool 100ifneq ($(KBUILD_CHECKSRC),0) 101 ifeq ($(KBUILD_CHECKSRC),2) 102 quiet_cmd_force_checksrc = CHECK $< 103 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; 104 else 105 quiet_cmd_checksrc = CHECK $< 106 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; 107 endif 108endif 109 110# Do section mismatch analysis for each module/built-in.o 111ifdef CONFIG_DEBUG_SECTION_MISMATCH 112 cmd_secanalysis = ; scripts/mod/modpost $@ 113endif 114 115# Compile C sources (.c) 116# --------------------------------------------------------------------------- 117 118# Default is built-in, unless we know otherwise 119modkern_cflags = \ 120 $(if $(part-of-module), \ 121 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ 122 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) 123quiet_modtag := $(empty) $(empty) 124 125$(real-objs-m) : part-of-module := y 126$(real-objs-m:.o=.i) : part-of-module := y 127$(real-objs-m:.o=.s) : part-of-module := y 128$(real-objs-m:.o=.lst): part-of-module := y 129 130$(real-objs-m) : quiet_modtag := [M] 131$(real-objs-m:.o=.i) : quiet_modtag := [M] 132$(real-objs-m:.o=.s) : quiet_modtag := [M] 133$(real-objs-m:.o=.lst): quiet_modtag := [M] 134 135$(obj-m) : quiet_modtag := [M] 136 137# Default for not multi-part modules 138modname = $(basetarget) 139 140$(multi-objs-m) : modname = $(modname-multi) 141$(multi-objs-m:.o=.i) : modname = $(modname-multi) 142$(multi-objs-m:.o=.s) : modname = $(modname-multi) 143$(multi-objs-m:.o=.lst) : modname = $(modname-multi) 144$(multi-objs-y) : modname = $(modname-multi) 145$(multi-objs-y:.o=.i) : modname = $(modname-multi) 146$(multi-objs-y:.o=.s) : modname = $(modname-multi) 147$(multi-objs-y:.o=.lst) : modname = $(modname-multi) 148 149quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ 150cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< 151 152$(obj)/%.s: $(src)/%.c FORCE 153 $(call if_changed_dep,cc_s_c) 154 155quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ 156cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< 157 158$(obj)/%.i: $(src)/%.c FORCE 159 $(call if_changed_dep,cc_i_c) 160 161cmd_gensymtypes = \ 162 $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ 163 $(GENKSYMS) $(if $(1), -T $(2)) \ 164 $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ 165 $(if $(KBUILD_PRESERVE),-p) \ 166 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) 167 168quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ 169cmd_cc_symtypes_c = \ 170 set -e; \ 171 $(call cmd_gensymtypes,true,$@) >/dev/null; \ 172 test -s $@ || rm -f $@ 173 174$(obj)/%.symtypes : $(src)/%.c FORCE 175 $(call cmd,cc_symtypes_c) 176 177# C (.c) files 178# The C file is compiled and updated dependency information is generated. 179# (See cmd_cc_o_c + relevant part of rule_cc_o_c) 180 181quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ 182 183ifndef CONFIG_MODVERSIONS 184cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 185 186else 187# When module versioning is enabled the following steps are executed: 188# o compile a .tmp_<file>.o from <file>.c 189# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does 190# not export symbols, we just rename .tmp_<file>.o to <file>.o and 191# are done. 192# o otherwise, we calculate symbol versions using the good old 193# genksyms on the preprocessed source and postprocess them in a way 194# that they are usable as a linker script 195# o generate <file>.o from .tmp_<file>.o using the linker to 196# replace the unresolved symbols __crc_exported_symbol with 197# the actual value of the checksum generated by genksyms 198 199cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< 200cmd_modversions = \ 201 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ 202 $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ 203 > $(@D)/.tmp_$(@F:.o=.ver); \ 204 \ 205 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ 206 -T $(@D)/.tmp_$(@F:.o=.ver); \ 207 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ 208 else \ 209 mv -f $(@D)/.tmp_$(@F) $@; \ 210 fi; 211endif 212 213ifdef CONFIG_FTRACE_MCOUNT_RECORD 214ifdef BUILD_C_RECORDMCOUNT 215ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") 216 RECORDMCOUNT_FLAGS = -w 217endif 218# Due to recursion, we must skip empty.o. 219# The empty.o file is created in the make process in order to determine 220# the target endianness and word size. It is made before all other C 221# files, including recordmcount. 222sub_cmd_record_mcount = \ 223 if [ $(@) != "scripts/mod/empty.o" ]; then \ 224 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ 225 fi; 226recordmcount_source := $(srctree)/scripts/recordmcount.c \ 227 $(srctree)/scripts/recordmcount.h 228else 229sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ 230 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ 231 "$(if $(CONFIG_64BIT),64,32)" \ 232 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ 233 "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ 234 "$(if $(part-of-module),1,0)" "$(@)"; 235recordmcount_source := $(srctree)/scripts/recordmcount.pl 236endif 237cmd_record_mcount = \ 238 if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \ 239 $(sub_cmd_record_mcount) \ 240 fi; 241endif 242 243define rule_cc_o_c 244 $(call echo-cmd,checksrc) $(cmd_checksrc) \ 245 $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ 246 $(cmd_modversions) \ 247 $(call echo-cmd,record_mcount) \ 248 $(cmd_record_mcount) \ 249 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ 250 $(dot-target).tmp; \ 251 rm -f $(depfile); \ 252 mv -f $(dot-target).tmp $(dot-target).cmd 253endef 254 255# Built-in and composite module parts 256$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE 257 $(call cmd,force_checksrc) 258 $(call if_changed_rule,cc_o_c) 259 260# Single-part modules are special since we need to mark them in $(MODVERDIR) 261 262$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE 263 $(call cmd,force_checksrc) 264 $(call if_changed_rule,cc_o_c) 265 @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) 266 267quiet_cmd_cc_lst_c = MKLST $@ 268 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ 269 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ 270 System.map $(OBJDUMP) > $@ 271 272$(obj)/%.lst: $(src)/%.c FORCE 273 $(call if_changed_dep,cc_lst_c) 274 275# Compile assembler sources (.S) 276# --------------------------------------------------------------------------- 277 278modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) 279 280$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) 281$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) 282 283quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ 284cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< 285 286$(obj)/%.s: $(src)/%.S FORCE 287 $(call if_changed_dep,as_s_S) 288 289quiet_cmd_as_o_S = AS $(quiet_modtag) $@ 290cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< 291 292$(obj)/%.o: $(src)/%.S FORCE 293 $(call if_changed_dep,as_o_S) 294 295targets += $(real-objs-y) $(real-objs-m) $(lib-y) 296targets += $(extra-y) $(MAKECMDGOALS) $(always) 297 298# Linker scripts preprocessor (.lds.S -> .lds) 299# --------------------------------------------------------------------------- 300quiet_cmd_cpp_lds_S = LDS $@ 301 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ 302 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< 303 304$(obj)/%.lds: $(src)/%.lds.S FORCE 305 $(call if_changed_dep,cpp_lds_S) 306 307# ASN.1 grammar 308# --------------------------------------------------------------------------- 309quiet_cmd_asn1_compiler = ASN.1 $@ 310 cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \ 311 $(subst .h,.c,$@) $(subst .c,.h,$@) 312 313.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h 314 315$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler 316 $(call cmd,asn1_compiler) 317 318# Build the compiled-in targets 319# --------------------------------------------------------------------------- 320 321# To build objects in subdirs, we need to descend into the directories 322$(sort $(subdir-obj-y)): $(subdir-ym) ; 323 324# 325# Rule to compile a set of .o files into one .o file 326# 327ifdef builtin-target 328quiet_cmd_link_o_target = LD $@ 329# If the list of objects to link is empty, just create an empty built-in.o 330cmd_link_o_target = $(if $(strip $(obj-y)),\ 331 $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \ 332 $(cmd_secanalysis),\ 333 rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@) 334 335$(builtin-target): $(obj-y) FORCE 336 $(call if_changed,link_o_target) 337 338targets += $(builtin-target) 339endif # builtin-target 340 341# 342# Rule to create modules.order file 343# 344# Create commands to either record .ko file or cat modules.order from 345# a subdirectory 346modorder-cmds = \ 347 $(foreach m, $(modorder), \ 348 $(if $(filter %/modules.order, $m), \ 349 cat $m;, echo kernel/$m;)) 350 351$(modorder-target): $(subdir-ym) FORCE 352 $(Q)(cat /dev/null; $(modorder-cmds)) > $@ 353 354# 355# Rule to compile a set of .o files into one .a file 356# 357ifdef lib-target 358quiet_cmd_link_l_target = AR $@ 359cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y) 360 361$(lib-target): $(lib-y) FORCE 362 $(call if_changed,link_l_target) 363 364targets += $(lib-target) 365endif 366 367# 368# Rule to link composite objects 369# 370# Composite objects are specified in kbuild makefile as follows: 371# <composite-object>-objs := <list of .o files> 372# or 373# <composite-object>-y := <list of .o files> 374link_multi_deps = \ 375$(filter $(addprefix $(obj)/, \ 376$($(subst $(obj)/,,$(@:.o=-objs))) \ 377$($(subst $(obj)/,,$(@:.o=-y)))), $^) 378 379quiet_cmd_link_multi-y = LD $@ 380cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) 381 382quiet_cmd_link_multi-m = LD [M] $@ 383cmd_link_multi-m = $(cmd_link_multi-y) 384 385$(multi-used-y): FORCE 386 $(call if_changed,link_multi-y) 387$(call multi_depend, $(multi-used-y), .o, -objs -y) 388 389$(multi-used-m): FORCE 390 $(call if_changed,link_multi-m) 391 @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) 392$(call multi_depend, $(multi-used-m), .o, -objs -y) 393 394targets += $(multi-used-y) $(multi-used-m) 395 396 397# Descending 398# --------------------------------------------------------------------------- 399 400PHONY += $(subdir-ym) 401$(subdir-ym): 402 $(Q)$(MAKE) $(build)=$@ 403 404# Add FORCE to the prequisites of a target to force it to be always rebuilt. 405# --------------------------------------------------------------------------- 406 407PHONY += FORCE 408 409FORCE: 410 411# Read all saved command lines and dependencies for the $(targets) we 412# may be building above, using $(if_changed{,_dep}). As an 413# optimization, we don't need to read them if the target does not 414# exist, we will rebuild anyway in that case. 415 416targets := $(wildcard $(sort $(targets))) 417cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 418 419ifneq ($(cmd_files),) 420 include $(cmd_files) 421endif 422 423# Declare the contents of the .PHONY variable as phony. We keep that 424# information in a variable se we can use it in if_changed and friends. 425 426.PHONY: $(PHONY) 427