xref: /openbmc/linux/scripts/Makefile.build (revision 1d05334d)
1# SPDX-License-Identifier: GPL-2.0
2# ==========================================================================
3# Building
4# ==========================================================================
5
6src := $(obj)
7
8PHONY := __build
9__build:
10
11# Init all relevant variables used in kbuild files so
12# 1) they have correct type
13# 2) they do not inherit any value from the environment
14obj-y :=
15obj-m :=
16lib-y :=
17lib-m :=
18always :=
19always-y :=
20always-m :=
21targets :=
22subdir-y :=
23subdir-m :=
24EXTRA_AFLAGS   :=
25EXTRA_CFLAGS   :=
26EXTRA_CPPFLAGS :=
27EXTRA_LDFLAGS  :=
28asflags-y  :=
29ccflags-y  :=
30cppflags-y :=
31ldflags-y  :=
32
33subdir-asflags-y :=
34subdir-ccflags-y :=
35
36# Read auto.conf if it exists, otherwise ignore
37-include include/config/auto.conf
38
39include scripts/Kbuild.include
40
41# The filename Kbuild has precedence over Makefile
42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44include $(kbuild-file)
45
46include scripts/Makefile.lib
47
48# Do not include host rules unless needed
49ifneq ($(hostprogs)$(hostcxxlibs-y)$(hostcxxlibs-m),)
50include scripts/Makefile.host
51endif
52
53ifndef obj
54$(warning kbuild: Makefile.build is included improperly)
55endif
56
57ifeq ($(need-modorder),)
58ifneq ($(obj-m),)
59$(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.)
60$(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.)
61endif
62endif
63
64# ===========================================================================
65
66ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
67lib-target := $(obj)/lib.a
68endif
69
70ifdef need-builtin
71builtin-target := $(obj)/built-in.a
72endif
73
74ifeq ($(CONFIG_MODULES)$(need-modorder),y1)
75modorder-target := $(obj)/modules.order
76endif
77
78mod-targets := $(patsubst %.o, %.mod, $(obj-m))
79
80# Linus' kernel sanity checking tool
81ifeq ($(KBUILD_CHECKSRC),1)
82  quiet_cmd_checksrc       = CHECK   $<
83        cmd_checksrc       = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
84else ifeq ($(KBUILD_CHECKSRC),2)
85  quiet_cmd_force_checksrc = CHECK   $<
86        cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
87endif
88
89ifneq ($(KBUILD_EXTRA_WARN),)
90  cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $<
91endif
92
93# Compile C sources (.c)
94# ---------------------------------------------------------------------------
95
96quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
97      cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS), $(c_flags)) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
98
99$(obj)/%.s: $(src)/%.c FORCE
100	$(call if_changed_dep,cc_s_c)
101
102quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
103cmd_cpp_i_c       = $(CPP) $(c_flags) -o $@ $<
104
105$(obj)/%.i: $(src)/%.c FORCE
106	$(call if_changed_dep,cpp_i_c)
107
108# These mirror gensymtypes_S and co below, keep them in synch.
109cmd_gensymtypes_c =                                                         \
110    $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
111    scripts/genksyms/genksyms $(if $(1), -T $(2))                           \
112     $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
113     $(if $(KBUILD_PRESERVE),-p)                                            \
114     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
115
116quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
117cmd_cc_symtypes_c =                                                         \
118    $(call cmd_gensymtypes_c,true,$@) >/dev/null;                           \
119    test -s $@ || rm -f $@
120
121$(obj)/%.symtypes : $(src)/%.c FORCE
122	$(call cmd,cc_symtypes_c)
123
124# LLVM assembly
125# Generate .ll files from .c
126quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
127      cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
128
129$(obj)/%.ll: $(src)/%.c FORCE
130	$(call if_changed_dep,cc_ll_c)
131
132# C (.c) files
133# The C file is compiled and updated dependency information is generated.
134# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
135
136quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
137      cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
138
139ifdef CONFIG_MODVERSIONS
140# When module versioning is enabled the following steps are executed:
141# o compile a <file>.o from <file>.c
142# o if <file>.o doesn't contain a __ksymtab version, i.e. does
143#   not export symbols, it's done.
144# o otherwise, we calculate symbol versions using the good old
145#   genksyms on the preprocessed source and postprocess them in a way
146#   that they are usable as a linker script
147# o generate .tmp_<file>.o from <file>.o using the linker to
148#   replace the unresolved symbols __crc_exported_symbol with
149#   the actual value of the checksum generated by genksyms
150# o remove .tmp_<file>.o to <file>.o
151
152cmd_modversions_c =								\
153	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
154		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
155		    > $(@D)/.tmp_$(@F:.o=.ver);					\
156										\
157		$(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ 		\
158			-T $(@D)/.tmp_$(@F:.o=.ver);				\
159		mv -f $(@D)/.tmp_$(@F) $@;					\
160		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
161	fi
162endif
163
164ifdef CONFIG_FTRACE_MCOUNT_RECORD
165ifndef CC_USING_RECORD_MCOUNT
166# compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
167ifdef BUILD_C_RECORDMCOUNT
168ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
169  RECORDMCOUNT_FLAGS = -w
170endif
171# Due to recursion, we must skip empty.o.
172# The empty.o file is created in the make process in order to determine
173# the target endianness and word size. It is made before all other C
174# files, including recordmcount.
175sub_cmd_record_mcount =					\
176	if [ $(@) != "scripts/mod/empty.o" ]; then	\
177		$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";	\
178	fi;
179recordmcount_source := $(srctree)/scripts/recordmcount.c \
180		    $(srctree)/scripts/recordmcount.h
181else
182sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
183	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
184	"$(if $(CONFIG_64BIT),64,32)" \
185	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \
186	"$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \
187	"$(if $(part-of-module),1,0)" "$(@)";
188recordmcount_source := $(srctree)/scripts/recordmcount.pl
189endif # BUILD_C_RECORDMCOUNT
190cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)),	\
191	$(sub_cmd_record_mcount))
192endif # CC_USING_RECORD_MCOUNT
193endif # CONFIG_FTRACE_MCOUNT_RECORD
194
195ifdef CONFIG_STACK_VALIDATION
196ifneq ($(SKIP_STACK_VALIDATION),1)
197
198__objtool_obj := $(objtree)/tools/objtool/objtool
199
200objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
201
202objtool_args += $(if $(part-of-module), --module,)
203
204ifndef CONFIG_FRAME_POINTER
205objtool_args += --no-fp
206endif
207ifdef CONFIG_GCOV_KERNEL
208objtool_args += --no-unreachable
209endif
210ifdef CONFIG_RETPOLINE
211  objtool_args += --retpoline
212endif
213ifdef CONFIG_X86_SMAP
214  objtool_args += --uaccess
215endif
216
217# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
218# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
219# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
220cmd_objtool = $(if $(patsubst y%,, \
221	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
222	$(__objtool_obj) $(objtool_args) $@)
223objtool_obj = $(if $(patsubst y%,, \
224	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
225	$(__objtool_obj))
226
227endif # SKIP_STACK_VALIDATION
228endif # CONFIG_STACK_VALIDATION
229
230# Rebuild all objects when objtool changes, or is enabled/disabled.
231objtool_dep = $(objtool_obj)					\
232	      $(wildcard include/config/orc/unwinder.h		\
233			 include/config/stack/validation.h)
234
235ifdef CONFIG_TRIM_UNUSED_KSYMS
236cmd_gen_ksymdeps = \
237	$(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >> $(dot-target).cmd
238endif
239
240define rule_cc_o_c
241	$(call cmd,checksrc)
242	$(call cmd_and_fixdep,cc_o_c)
243	$(call cmd,gen_ksymdeps)
244	$(call cmd,checkdoc)
245	$(call cmd,objtool)
246	$(call cmd,modversions_c)
247	$(call cmd,record_mcount)
248endef
249
250define rule_as_o_S
251	$(call cmd_and_fixdep,as_o_S)
252	$(call cmd,gen_ksymdeps)
253	$(call cmd,objtool)
254	$(call cmd,modversions_S)
255endef
256
257# List module undefined symbols (or empty line if not enabled)
258ifdef CONFIG_TRIM_UNUSED_KSYMS
259cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
260else
261cmd_undef_syms = echo
262endif
263
264# Built-in and composite module parts
265$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
266	$(call cmd,force_checksrc)
267	$(call if_changed_rule,cc_o_c)
268
269cmd_mod = { \
270	echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
271	$(cmd_undef_syms); \
272	} > $@
273
274$(obj)/%.mod: $(obj)/%.o FORCE
275	$(call if_changed,mod)
276
277targets += $(mod-targets)
278
279quiet_cmd_cc_lst_c = MKLST   $@
280      cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
281		     $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
282				     System.map $(OBJDUMP) > $@
283
284$(obj)/%.lst: $(src)/%.c FORCE
285	$(call if_changed_dep,cc_lst_c)
286
287# Compile assembler sources (.S)
288# ---------------------------------------------------------------------------
289
290# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
291# or a file that it includes, in order to get versioned symbols. We build a
292# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
293# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
294#
295# This is convoluted. The .S file must first be preprocessed to run guards and
296# expand names, then the resulting exports must be constructed into plain
297# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
298# to make the genksyms input.
299#
300# These mirror gensymtypes_c and co above, keep them in synch.
301cmd_gensymtypes_S =                                                         \
302   { echo "\#include <linux/kernel.h>" ;                                    \
303     echo "\#include <asm/asm-prototypes.h>" ;                              \
304    $(CPP) $(a_flags) $< |                                                  \
305     grep "\<___EXPORT_SYMBOL\>" |                                          \
306     sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ; } | \
307    $(CPP) -D__GENKSYMS__ $(c_flags) -xc - |                                \
308    scripts/genksyms/genksyms $(if $(1), -T $(2))                           \
309     $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
310     $(if $(KBUILD_PRESERVE),-p)                                            \
311     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
312
313quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
314cmd_cc_symtypes_S =                                                         \
315    $(call cmd_gensymtypes_S,true,$@) >/dev/null;                           \
316    test -s $@ || rm -f $@
317
318$(obj)/%.symtypes : $(src)/%.S FORCE
319	$(call cmd,cc_symtypes_S)
320
321
322quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
323cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
324
325$(obj)/%.s: $(src)/%.S FORCE
326	$(call if_changed_dep,cpp_s_S)
327
328quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
329      cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
330
331ifdef CONFIG_ASM_MODVERSIONS
332
333# versioning matches the C process described above, with difference that
334# we parse asm-prototypes.h C header to get function definitions.
335
336cmd_modversions_S =								\
337	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
338		$(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
339		    > $(@D)/.tmp_$(@F:.o=.ver);					\
340										\
341		$(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ 		\
342			-T $(@D)/.tmp_$(@F:.o=.ver);				\
343		mv -f $(@D)/.tmp_$(@F) $@;					\
344		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
345	fi
346endif
347
348$(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
349	$(call if_changed_rule,as_o_S)
350
351targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
352targets += $(extra-y) $(always-y) $(MAKECMDGOALS)
353
354# Linker scripts preprocessor (.lds.S -> .lds)
355# ---------------------------------------------------------------------------
356quiet_cmd_cpp_lds_S = LDS     $@
357      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
358	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
359
360$(obj)/%.lds: $(src)/%.lds.S FORCE
361	$(call if_changed_dep,cpp_lds_S)
362
363# ASN.1 grammar
364# ---------------------------------------------------------------------------
365quiet_cmd_asn1_compiler = ASN.1   $(basename $@).[ch]
366      cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
367				$(basename $@).c $(basename $@).h
368
369$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
370	$(call cmd,asn1_compiler)
371
372# Build the compiled-in targets
373# ---------------------------------------------------------------------------
374
375# To build objects in subdirs, we need to descend into the directories
376$(obj)/%/built-in.a: $(obj)/% ;
377
378#
379# Rule to compile a set of .o files into one .a file (without symbol table)
380#
381ifdef builtin-target
382
383quiet_cmd_ar_builtin = AR      $@
384      cmd_ar_builtin = rm -f $@; $(AR) cDPrST $@ $(real-prereqs)
385
386$(builtin-target): $(real-obj-y) FORCE
387	$(call if_changed,ar_builtin)
388
389targets += $(builtin-target)
390endif # builtin-target
391
392#
393# Rule to create modules.order file
394#
395# Create commands to either record .ko file or cat modules.order from
396# a subdirectory
397$(modorder-target): $(subdir-ym) FORCE
398	$(Q){ $(foreach m, $(modorder), \
399	$(if $(filter %/modules.order, $m), cat $m, echo $m);) :; } \
400	| $(AWK) '!x[$$0]++' - > $@
401
402#
403# Rule to compile a set of .o files into one .a file (with symbol table)
404#
405ifdef lib-target
406
407$(lib-target): $(lib-y) FORCE
408	$(call if_changed,ar)
409
410targets += $(lib-target)
411
412endif
413
414# NOTE:
415# Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
416# module is turned into a multi object module, $^ will contain header file
417# dependencies recorded in the .*.cmd file.
418quiet_cmd_link_multi-m = LD [M]  $@
419      cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^)
420
421$(multi-used-m): FORCE
422	$(call if_changed,link_multi-m)
423$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
424
425targets += $(multi-used-m)
426targets := $(filter-out $(PHONY), $(targets))
427
428# Add intermediate targets:
429# When building objects with specific suffix patterns, add intermediate
430# targets that the final targets are derived from.
431intermediate_targets = $(foreach sfx, $(2), \
432				$(patsubst %$(strip $(1)),%$(sfx), \
433					$(filter %$(strip $(1)), $(targets))))
434# %.asn1.o <- %.asn1.[ch] <- %.asn1
435# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
436# %.lex.o <- %.lex.c <- %.l
437# %.tab.o <- %.tab.[ch] <- %.y
438targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
439	   $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
440	   $(call intermediate_targets, .lex.o, .lex.c) \
441	   $(call intermediate_targets, .tab.o, .tab.c .tab.h)
442
443# Build
444# ---------------------------------------------------------------------------
445
446ifdef single-build
447
448KBUILD_SINGLE_TARGETS := $(filter $(obj)/%, $(KBUILD_SINGLE_TARGETS))
449
450curdir-single := $(sort $(foreach x, $(KBUILD_SINGLE_TARGETS), \
451			$(if $(filter $(x) $(basename $(x)).o, $(targets)), $(x))))
452
453# Handle single targets without any rule: show "Nothing to be done for ..." or
454# "No rule to make target ..." depending on whether the target exists.
455unknown-single := $(filter-out $(addsuffix /%, $(subdir-ym)), \
456			$(filter-out $(curdir-single), $(KBUILD_SINGLE_TARGETS)))
457
458single-subdirs := $(foreach d, $(subdir-ym), \
459			$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
460
461__build: $(curdir-single) $(single-subdirs)
462ifneq ($(unknown-single),)
463	$(Q)$(MAKE) -f /dev/null $(unknown-single)
464endif
465	@:
466
467ifeq ($(curdir-single),)
468# Nothing to do in this directory. Do not include any .*.cmd file for speed-up
469targets :=
470else
471targets += $(curdir-single)
472endif
473
474else
475
476__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
477	 $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
478	 $(subdir-ym) $(always-y)
479	@:
480
481endif
482
483# Descending
484# ---------------------------------------------------------------------------
485
486PHONY += $(subdir-ym)
487$(subdir-ym):
488	$(Q)$(MAKE) $(build)=$@ \
489	$(if $(filter $@/, $(KBUILD_SINGLE_TARGETS)),single-build=) \
490	need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) \
491	need-modorder=$(if $(need-modorder),$(if $(filter $@/modules.order, $(modorder)),1))
492
493# Add FORCE to the prequisites of a target to force it to be always rebuilt.
494# ---------------------------------------------------------------------------
495
496PHONY += FORCE
497
498FORCE:
499
500# Read all saved command lines and dependencies for the $(targets) we
501# may be building above, using $(if_changed{,_dep}). As an
502# optimization, we don't need to read them if the target does not
503# exist, we will rebuild anyway in that case.
504
505existing-targets := $(wildcard $(sort $(targets)))
506
507-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
508
509ifdef building_out_of_srctree
510# Create directories for object files if they do not exist
511obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
512# If targets exist, their directories apparently exist. Skip mkdir.
513existing-dirs := $(sort $(patsubst %/,%, $(dir $(existing-targets))))
514obj-dirs := $(strip $(filter-out $(existing-dirs), $(obj-dirs)))
515ifneq ($(obj-dirs),)
516$(shell mkdir -p $(obj-dirs))
517endif
518endif
519
520.PHONY: $(PHONY)
521