xref: /openbmc/linux/scripts/Kbuild.include (revision a13144e2)
1# SPDX-License-Identifier: GPL-2.0
2####
3# kbuild: Generic definitions
4
5# Convenient variables
6comma   := ,
7quote   := "
8squote  := '
9empty   :=
10space   := $(empty) $(empty)
11space_escape := _-_SPACE_-_
12pound := \#
13define newline
14
15
16endef
17
18###
19# Comparison macros.
20# Usage: $(call test-lt, $(CONFIG_LLD_VERSION), 150000)
21#
22# Use $(intcmp ...) if supported. (Make >= 4.4)
23# Otherwise, fall back to the 'test' shell command.
24ifeq ($(intcmp 1,0,,,y),y)
25test-ge = $(intcmp $(strip $1)0, $(strip $2)0,,y,y)
26test-gt = $(intcmp $(strip $1)0, $(strip $2)0,,,y)
27else
28test-ge = $(shell test $(strip $1)0 -ge $(strip $2)0 && echo y)
29test-gt = $(shell test $(strip $1)0 -gt $(strip $2)0 && echo y)
30endif
31test-le = $(call test-ge, $2, $1)
32test-lt = $(call test-gt, $2, $1)
33
34###
35# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
36dot-target = $(dir $@).$(notdir $@)
37
38###
39# Name of target with a '.tmp_' as filename prefix. foo/bar.o => foo/.tmp_bar.o
40tmp-target = $(dir $@).tmp_$(notdir $@)
41
42###
43# The temporary file to save gcc -MMD generated dependencies must not
44# contain a comma
45depfile = $(subst $(comma),_,$(dot-target).d)
46
47###
48# filename of target with directory and extension stripped
49basetarget = $(basename $(notdir $@))
50
51###
52# real prerequisites without phony targets
53real-prereqs = $(filter-out $(PHONY), $^)
54
55###
56# Escape single quote for use in echo statements
57escsq = $(subst $(squote),'\$(squote)',$1)
58
59###
60# Quote a string to pass it to C files. foo => '"foo"'
61stringify = $(squote)$(quote)$1$(quote)$(squote)
62
63###
64# The path to Kbuild or Makefile. Kbuild has precedence over Makefile.
65kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
66kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
67
68###
69# Read a file, replacing newlines with spaces
70#
71# Make 4.2 or later can read a file by using its builtin function.
72ifneq ($(filter-out 3.% 4.0 4.1, $(MAKE_VERSION)),)
73read-file = $(subst $(newline),$(space),$(file < $1))
74else
75read-file = $(shell cat $1 2>/dev/null)
76endif
77
78###
79# Easy method for doing a status message
80       kecho := :
81 quiet_kecho := echo
82silent_kecho := :
83kecho := $($(quiet)kecho)
84
85###
86# filechk is used to check if the content of a generated file is updated.
87# Sample usage:
88#
89# filechk_sample = echo $(KERNELRELEASE)
90# version.h: FORCE
91#	$(call filechk,sample)
92#
93# The rule defined shall write to stdout the content of the new file.
94# The existing file will be compared with the new one.
95# - If no file exist it is created
96# - If the content differ the new file is used
97# - If they are equal no change, and no timestamp update
98define filechk
99	$(check-FORCE)
100	$(Q)set -e;						\
101	mkdir -p $(dir $@);					\
102	trap "rm -f $(dot-target).tmp" EXIT;			\
103	{ $(filechk_$(1)); } > $(dot-target).tmp;		\
104	if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then	\
105		$(kecho) '  UPD     $@';			\
106		mv -f $(dot-target).tmp $@;			\
107	fi
108endef
109
110###
111# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
112# Usage:
113# $(Q)$(MAKE) $(build)=dir
114build := -f $(srctree)/scripts/Makefile.build obj
115
116###
117# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
118# Usage:
119# $(Q)$(MAKE) $(dtbinst)=dir
120dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj
121
122###
123# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
124# Usage:
125# $(Q)$(MAKE) $(clean)=dir
126clean := -f $(srctree)/scripts/Makefile.clean obj
127
128# echo command.
129# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
130echo-cmd = $(if $($(quiet)cmd_$(1)),\
131	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
132
133# sink stdout for 'make -s'
134       redirect :=
135 quiet_redirect :=
136silent_redirect := exec >/dev/null;
137
138# Delete the target on interruption
139#
140# GNU Make automatically deletes the target if it has already been changed by
141# the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make
142# will delete incomplete targets), and resume it later.
143#
144# However, this does not work when the stderr is piped to another program, like
145#  $ make >&2 | tee log
146# Make dies with SIGPIPE before cleaning the targets.
147#
148# To address it, we clean the target in signal traps.
149#
150# Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM.
151# So, we cover them, and also SIGPIPE just in case.
152#
153# Of course, this is unneeded for phony targets.
154delete-on-interrupt = \
155	$(if $(filter-out $(PHONY), $@), \
156		$(foreach sig, HUP INT QUIT TERM PIPE, \
157			trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);))
158
159# printing commands
160cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(delete-on-interrupt) $(cmd_$(1))
161
162###
163# if_changed      - execute command if any prerequisite is newer than
164#                   target, or command line has changed
165# if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
166#                   including used config symbols
167# if_changed_rule - as if_changed but execute rule instead
168# See Documentation/kbuild/makefiles.rst for more info
169
170ifneq ($(KBUILD_NOCMDDEP),1)
171# Check if both commands are the same including their order. Result is empty
172# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
173cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
174                         $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
175else
176cmd-check = $(if $(strip $(cmd_$@)),,1)
177endif
178
179# Replace >$< with >$$< to preserve $ when reloading the .cmd file
180# (needed for make)
181# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file
182# (needed for make)
183# Replace >'< with >'\''< to be able to enclose the whole string in '...'
184# (needed for the shell)
185make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
186
187# Find any prerequisites that are newer than target or that do not exist.
188# PHONY targets skipped in both cases.
189newer-prereqs = $(filter-out $(PHONY),$?)
190
191# It is a typical mistake to forget the FORCE prerequisite. Check it here so
192# no more breakage will slip in.
193check-FORCE = $(if $(filter FORCE, $^),,$(warning FORCE prerequisite is missing))
194
195if-changed-cond = $(newer-prereqs)$(cmd-check)$(check-FORCE)
196
197# Execute command if command has changed or prerequisite(s) are updated.
198if_changed = $(if $(if-changed-cond),$(cmd_and_savecmd),@:)
199
200cmd_and_savecmd =                                                            \
201	$(cmd);                                                              \
202	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd
203
204# Execute the command and also postprocess generated .d dependencies file.
205if_changed_dep = $(if $(if-changed-cond),$(cmd_and_fixdep),@:)
206
207cmd_and_fixdep =                                                             \
208	$(cmd);                                                              \
209	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\
210	rm -f $(depfile)
211
212# Usage: $(call if_changed_rule,foo)
213# Will check if $(cmd_foo) or any of the prerequisites changed,
214# and if so will execute $(rule_foo).
215if_changed_rule = $(if $(if-changed-cond),$(rule_$(1)),@:)
216
217###
218# why - tell why a target got built
219#       enabled by make V=2
220#       Output (listed in the order they are checked):
221#          (1) - due to target is PHONY
222#          (2) - due to target missing
223#          (3) - due to: file1.h file2.h
224#          (4) - due to command line change
225#          (5) - due to missing .cmd file
226#          (6) - due to target not in $(targets)
227# (1) PHONY targets are always build
228# (2) No target, so we better build it
229# (3) Prerequisite is newer than target
230# (4) The command line stored in the file named dir/.target.cmd
231#     differed from actual command line. This happens when compiler
232#     options changes
233# (5) No dir/.target.cmd file (used to store command line)
234# (6) No dir/.target.cmd file and target not listed in $(targets)
235#     This is a good hint that there is a bug in the kbuild file
236ifeq ($(KBUILD_VERBOSE),2)
237why =                                                                        \
238    $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
239        $(if $(wildcard $@),                                                 \
240            $(if $(newer-prereqs),- due to: $(newer-prereqs),                \
241                $(if $(cmd-check),                                           \
242                    $(if $(cmd_$@),- due to command line change,             \
243                        $(if $(filter $@, $(targets)),                       \
244                            - due to missing .cmd file,                      \
245                            - due to $(notdir $@) not in $$(targets)         \
246                         )                                                   \
247                     )                                                       \
248                 )                                                           \
249             ),                                                              \
250             - due to target missing                                         \
251         )                                                                   \
252     )
253
254echo-why = $(call escsq, $(strip $(why)))
255endif
256
257###############################################################################
258
259# delete partially updated (i.e. corrupted) files on error
260.DELETE_ON_ERROR:
261
262# do not delete intermediate files automatically
263#
264# .NOTINTERMEDIATE is more correct, but only available on newer Make versions.
265# Make 4.4 introduced .NOTINTERMEDIATE, and it appears in .FEATURES, but the
266# global .NOTINTERMEDIATE does not work. We can use it on Make > 4.4.
267# Use .SECONDARY for older Make versions, but "newer-prereq" cannot detect
268# deleted files.
269ifneq ($(and $(filter notintermediate, $(.FEATURES)),$(filter-out 4.4,$(MAKE_VERSION))),)
270.NOTINTERMEDIATE:
271else
272.SECONDARY:
273endif
274