1#### 2# kbuild: Generic definitions 3 4# Convenient variables 5comma := , 6squote := ' 7empty := 8space := $(empty) $(empty) 9 10### 11# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o 12dot-target = $(dir $@).$(notdir $@) 13 14### 15# The temporary file to save gcc -MD generated dependencies must not 16# contain a comma 17depfile = $(subst $(comma),_,$(dot-target).d) 18 19### 20# filename of target with directory and extension stripped 21basetarget = $(basename $(notdir $@)) 22 23### 24# Escape single quote for use in echo statements 25escsq = $(subst $(squote),'\$(squote)',$1) 26 27### 28# Easy method for doing a status message 29 kecho := : 30 quiet_kecho := echo 31silent_kecho := : 32kecho := $($(quiet)kecho) 33 34### 35# filechk is used to check if the content of a generated file is updated. 36# Sample usage: 37# define filechk_sample 38# echo $KERNELRELEASE 39# endef 40# version.h : Makefile 41# $(call filechk,sample) 42# The rule defined shall write to stdout the content of the new file. 43# The existing file will be compared with the new one. 44# - If no file exist it is created 45# - If the content differ the new file is used 46# - If they are equal no change, and no timestamp update 47# - stdin is piped in from the first prerequisite ($<) so one has 48# to specify a valid file as first prerequisite (often the kbuild file) 49define filechk 50 $(Q)set -e; \ 51 $(kecho) ' CHK $@'; \ 52 mkdir -p $(dir $@); \ 53 $(filechk_$(1)) < $< > $@.tmp; \ 54 if [ -r $@ ] && cmp -s $@ $@.tmp; then \ 55 rm -f $@.tmp; \ 56 else \ 57 $(kecho) ' UPD $@'; \ 58 mv -f $@.tmp $@; \ 59 fi 60endef 61 62###### 63# gcc support functions 64# See documentation in Documentation/kbuild/makefiles.txt 65 66# cc-cross-prefix 67# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-) 68# Return first prefix where a prefix$(CC) is found in PATH. 69# If no $(CC) found in PATH with listed prefixes return nothing 70cc-cross-prefix = \ 71 $(word 1, $(foreach c,$(1), \ 72 $(shell set -e; \ 73 if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \ 74 echo $(c); \ 75 fi))) 76 77# output directory for tests below 78TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) 79 80# try-run 81# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) 82# Exit code chooses option. "$$TMP" is can be used as temporary file and 83# is automatically cleaned up. 84try-run = $(shell set -e; \ 85 TMP="$(TMPOUT).$$$$.tmp"; \ 86 TMPO="$(TMPOUT).$$$$.o"; \ 87 if ($(1)) >/dev/null 2>&1; \ 88 then echo "$(2)"; \ 89 else echo "$(3)"; \ 90 fi; \ 91 rm -f "$$TMP" "$$TMPO") 92 93# as-option 94# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) 95 96as-option = $(call try-run,\ 97 $(CC) $(KBUILD_CFLAGS) $(1) -c -xassembler /dev/null -o "$$TMP",$(1),$(2)) 98 99# as-instr 100# Usage: cflags-y += $(call as-instr,instr,option1,option2) 101 102as-instr = $(call try-run,\ 103 /bin/echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3)) 104 105# cc-option 106# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) 107 108cc-option = $(call try-run,\ 109 $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2)) 110 111# cc-option-yn 112# Usage: flag := $(call cc-option-yn,-march=winchip-c6) 113cc-option-yn = $(call try-run,\ 114 $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n) 115 116# cc-option-align 117# Prefix align with either -falign or -malign 118cc-option-align = $(subst -functions=0,,\ 119 $(call cc-option,-falign-functions=0,-malign-functions=0)) 120 121# cc-disable-warning 122# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) 123cc-disable-warning = $(call try-run,\ 124 $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -xc /dev/null -o "$$TMP",-Wno-$(strip $(1))) 125 126# cc-version 127# Usage gcc-ver := $(call cc-version) 128cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) 129 130# cc-fullversion 131# Usage gcc-ver := $(call cc-fullversion) 132cc-fullversion = $(shell $(CONFIG_SHELL) \ 133 $(srctree)/scripts/gcc-version.sh -p $(CC)) 134 135# cc-ifversion 136# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) 137cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3)) 138 139# cc-ldoption 140# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both) 141cc-ldoption = $(call try-run,\ 142 $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2)) 143 144# ld-option 145# Usage: LDFLAGS += $(call ld-option, -X) 146ld-option = $(call try-run,\ 147 $(CC) /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2)) 148 149# ar-option 150# Usage: KBUILD_ARFLAGS := $(call ar-option,D) 151# Important: no spaces around options 152ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2)) 153 154###### 155 156### 157# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= 158# Usage: 159# $(Q)$(MAKE) $(build)=dir 160build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj 161 162### 163# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= 164# Usage: 165# $(Q)$(MAKE) $(modbuiltin)=dir 166modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj 167 168# Prefix -I with $(srctree) if it is not an absolute path. 169# skip if -I has no parameter 170addtree = $(if $(patsubst -I%,%,$(1)), \ 171$(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)) 172 173# Find all -I options and call addtree 174flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) 175 176# echo command. 177# Short version is used, if $(quiet) equals `quiet_', otherwise full one. 178echo-cmd = $(if $($(quiet)cmd_$(1)),\ 179 echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) 180 181# printing commands 182cmd = @$(echo-cmd) $(cmd_$(1)) 183 184# Add $(obj)/ for paths that are not absolute 185objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o))) 186 187### 188# if_changed - execute command if any prerequisite is newer than 189# target, or command line has changed 190# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies 191# including used config symbols 192# if_changed_rule - as if_changed but execute rule instead 193# See Documentation/kbuild/makefiles.txt for more info 194 195ifneq ($(KBUILD_NOCMDDEP),1) 196# Check if both arguments has same arguments. Result is empty string if equal. 197# User may override this check using make KBUILD_NOCMDDEP=1 198arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ 199 $(filter-out $(cmd_$@), $(cmd_$(1))) ) 200else 201arg-check = $(if $(strip $(cmd_$@)),,1) 202endif 203 204# >'< substitution is for echo to work, 205# >$< substitution to preserve $ when reloading .cmd file 206# note: when using inline perl scripts [perl -e '...$$t=1;...'] 207# in $(cmd_xxx) double $$ your perl vars 208make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))) 209 210# Find any prerequisites that is newer than target or that does not exist. 211# PHONY targets skipped in both cases. 212any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) 213 214# Execute command if command has changed or prerequisite(s) are updated. 215# 216if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ 217 @set -e; \ 218 $(echo-cmd) $(cmd_$(1)); \ 219 echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd) 220 221# Execute the command and also postprocess generated .d dependencies file. 222if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ 223 @set -e; \ 224 $(echo-cmd) $(cmd_$(1)); \ 225 scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\ 226 rm -f $(depfile); \ 227 mv -f $(dot-target).tmp $(dot-target).cmd) 228 229# Usage: $(call if_changed_rule,foo) 230# Will check if $(cmd_foo) or any of the prerequisites changed, 231# and if so will execute $(rule_foo). 232if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ 233 @set -e; \ 234 $(rule_$(1))) 235 236### 237# why - tell why a a target got build 238# enabled by make V=2 239# Output (listed in the order they are checked): 240# (1) - due to target is PHONY 241# (2) - due to target missing 242# (3) - due to: file1.h file2.h 243# (4) - due to command line change 244# (5) - due to missing .cmd file 245# (6) - due to target not in $(targets) 246# (1) PHONY targets are always build 247# (2) No target, so we better build it 248# (3) Prerequisite is newer than target 249# (4) The command line stored in the file named dir/.target.cmd 250# differed from actual command line. This happens when compiler 251# options changes 252# (5) No dir/.target.cmd file (used to store command line) 253# (6) No dir/.target.cmd file and target not listed in $(targets) 254# This is a good hint that there is a bug in the kbuild file 255ifeq ($(KBUILD_VERBOSE),2) 256why = \ 257 $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ 258 $(if $(wildcard $@), \ 259 $(if $(strip $(any-prereq)),- due to: $(any-prereq), \ 260 $(if $(arg-check), \ 261 $(if $(cmd_$@),- due to command line change, \ 262 $(if $(filter $@, $(targets)), \ 263 - due to missing .cmd file, \ 264 - due to $(notdir $@) not in $$(targets) \ 265 ) \ 266 ) \ 267 ) \ 268 ), \ 269 - due to target missing \ 270 ) \ 271 ) 272 273echo-why = $(call escsq, $(strip $(why))) 274endif 275