1 /* 2 * net/tipc/bearer.h: Include file for TIPC bearer code 3 * 4 * Copyright (c) 1996-2006, Ericsson AB 5 * Copyright (c) 2005, 2010-2011, Wind River Systems 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the names of the copyright holders nor the names of its 17 * contributors may be used to endorse or promote products derived from 18 * this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 34 * POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37 #ifndef _TIPC_BEARER_H 38 #define _TIPC_BEARER_H 39 40 #include "bcast.h" 41 42 #define MAX_BEARERS 8 43 #define MAX_MEDIA 4 44 45 /* 46 * Identifiers of supported TIPC media types 47 */ 48 #define TIPC_MEDIA_TYPE_ETH 1 49 50 /* 51 * Destination address structure used by TIPC bearers when sending messages 52 * 53 * IMPORTANT: The fields of this structure MUST be stored using the specified 54 * byte order indicated below, as the structure is exchanged between nodes 55 * as part of a link setup process. 56 */ 57 struct tipc_media_addr { 58 __be32 type; /* bearer type (network byte order) */ 59 union { 60 __u8 eth_addr[6]; /* 48 bit Ethernet addr (byte array) */ 61 } dev_addr; 62 }; 63 64 struct tipc_bearer; 65 66 /** 67 * struct media - TIPC media information available to internal users 68 * @send_msg: routine which handles buffer transmission 69 * @enable_bearer: routine which enables a bearer 70 * @disable_bearer: routine which disables a bearer 71 * @addr2str: routine which converts bearer's address to string form 72 * @bcast_addr: media address used in broadcasting 73 * @priority: default link (and bearer) priority 74 * @tolerance: default time (in ms) before declaring link failure 75 * @window: default window (in packets) before declaring link congestion 76 * @type_id: TIPC media identifier 77 * @name: media name 78 */ 79 80 struct media { 81 int (*send_msg)(struct sk_buff *buf, 82 struct tipc_bearer *b_ptr, 83 struct tipc_media_addr *dest); 84 int (*enable_bearer)(struct tipc_bearer *b_ptr); 85 void (*disable_bearer)(struct tipc_bearer *b_ptr); 86 char *(*addr2str)(struct tipc_media_addr *a, 87 char *str_buf, int str_size); 88 struct tipc_media_addr bcast_addr; 89 u32 priority; 90 u32 tolerance; 91 u32 window; 92 u32 type_id; 93 char name[TIPC_MAX_MEDIA_NAME]; 94 }; 95 96 /** 97 * struct tipc_bearer - TIPC bearer structure 98 * @usr_handle: pointer to additional media-specific information about bearer 99 * @mtu: max packet size bearer can support 100 * @blocked: non-zero if bearer is blocked 101 * @lock: spinlock for controlling access to bearer 102 * @addr: media-specific address associated with bearer 103 * @name: bearer name (format = media:interface) 104 * @media: ptr to media structure associated with bearer 105 * @priority: default link priority for bearer 106 * @identity: array index of this bearer within TIPC bearer array 107 * @link_req: ptr to (optional) structure making periodic link setup requests 108 * @links: list of non-congested links associated with bearer 109 * @cong_links: list of congested links associated with bearer 110 * @active: non-zero if bearer structure is represents a bearer 111 * @net_plane: network plane ('A' through 'H') currently associated with bearer 112 * @nodes: indicates which nodes in cluster can be reached through bearer 113 * 114 * Note: media-specific code is responsible for initialization of the fields 115 * indicated below when a bearer is enabled; TIPC's generic bearer code takes 116 * care of initializing all other fields. 117 */ 118 struct tipc_bearer { 119 void *usr_handle; /* initalized by media */ 120 u32 mtu; /* initalized by media */ 121 int blocked; /* initalized by media */ 122 struct tipc_media_addr addr; /* initalized by media */ 123 char name[TIPC_MAX_BEARER_NAME]; 124 spinlock_t lock; 125 struct media *media; 126 u32 priority; 127 u32 identity; 128 struct link_req *link_req; 129 struct list_head links; 130 struct list_head cong_links; 131 int active; 132 char net_plane; 133 struct tipc_node_map nodes; 134 }; 135 136 struct bearer_name { 137 char media_name[TIPC_MAX_MEDIA_NAME]; 138 char if_name[TIPC_MAX_IF_NAME]; 139 }; 140 141 struct link; 142 143 extern struct tipc_bearer tipc_bearers[]; 144 145 /* 146 * TIPC routines available to supported media types 147 */ 148 int tipc_register_media(u32 media_type, 149 char *media_name, int (*enable)(struct tipc_bearer *), 150 void (*disable)(struct tipc_bearer *), 151 int (*send_msg)(struct sk_buff *, 152 struct tipc_bearer *, struct tipc_media_addr *), 153 char *(*addr2str)(struct tipc_media_addr *a, 154 char *str_buf, int str_size), 155 struct tipc_media_addr *bcast_addr, const u32 bearer_priority, 156 const u32 link_tolerance, /* [ms] */ 157 const u32 send_window_limit); 158 159 void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr); 160 161 int tipc_block_bearer(const char *name); 162 void tipc_continue(struct tipc_bearer *tb_ptr); 163 164 int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority); 165 int tipc_disable_bearer(const char *name); 166 167 /* 168 * Routines made available to TIPC by supported media types 169 */ 170 int tipc_eth_media_start(void); 171 void tipc_eth_media_stop(void); 172 173 void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a); 174 struct sk_buff *tipc_media_get_names(void); 175 176 struct sk_buff *tipc_bearer_get_names(void); 177 void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest); 178 void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest); 179 void tipc_bearer_schedule(struct tipc_bearer *b_ptr, struct link *l_ptr); 180 struct tipc_bearer *tipc_bearer_find_interface(const char *if_name); 181 int tipc_bearer_resolve_congestion(struct tipc_bearer *b_ptr, struct link *l_ptr); 182 int tipc_bearer_congested(struct tipc_bearer *b_ptr, struct link *l_ptr); 183 void tipc_bearer_stop(void); 184 void tipc_bearer_lock_push(struct tipc_bearer *b_ptr); 185 186 187 /** 188 * tipc_bearer_send- sends buffer to destination over bearer 189 * 190 * Returns true (1) if successful, or false (0) if unable to send 191 * 192 * IMPORTANT: 193 * The media send routine must not alter the buffer being passed in 194 * as it may be needed for later retransmission! 195 * 196 * If the media send routine returns a non-zero value (indicating that 197 * it was unable to send the buffer), it must: 198 * 1) mark the bearer as blocked, 199 * 2) call tipc_continue() once the bearer is able to send again. 200 * Media types that are unable to meet these two critera must ensure their 201 * send routine always returns success -- even if the buffer was not sent -- 202 * and let TIPC's link code deal with the undelivered message. 203 */ 204 205 static inline int tipc_bearer_send(struct tipc_bearer *b_ptr, 206 struct sk_buff *buf, 207 struct tipc_media_addr *dest) 208 { 209 return !b_ptr->media->send_msg(buf, b_ptr, dest); 210 } 211 212 #endif /* _TIPC_BEARER_H */ 213