xref: /openbmc/linux/net/tipc/bearer.h (revision 31b90347)
1 /*
2  * net/tipc/bearer.h: Include file for TIPC bearer code
3  *
4  * Copyright (c) 1996-2006, Ericsson AB
5  * Copyright (c) 2005, 2010-2011, Wind River Systems
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the names of the copyright holders nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * Alternatively, this software may be distributed under the terms of the
21  * GNU General Public License ("GPL") version 2 as published by the Free
22  * Software Foundation.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36 
37 #ifndef _TIPC_BEARER_H
38 #define _TIPC_BEARER_H
39 
40 #include "bcast.h"
41 
42 #define MAX_BEARERS	2
43 #define MAX_MEDIA	2
44 
45 /*
46  * Identifiers associated with TIPC message header media address info
47  *
48  * - address info field is 20 bytes long
49  * - media type identifier located at offset 3
50  * - remaining bytes vary according to media type
51  */
52 #define TIPC_MEDIA_ADDR_SIZE	20
53 #define TIPC_MEDIA_TYPE_OFFSET	3
54 
55 /*
56  * Identifiers of supported TIPC media types
57  */
58 #define TIPC_MEDIA_TYPE_ETH	1
59 #define TIPC_MEDIA_TYPE_IB	2
60 
61 /**
62  * struct tipc_media_addr - destination address used by TIPC bearers
63  * @value: address info (format defined by media)
64  * @media_id: TIPC media type identifier
65  * @broadcast: non-zero if address is a broadcast address
66  */
67 struct tipc_media_addr {
68 	u8 value[TIPC_MEDIA_ADDR_SIZE];
69 	u8 media_id;
70 	u8 broadcast;
71 };
72 
73 struct tipc_bearer;
74 
75 /**
76  * struct tipc_media - TIPC media information available to internal users
77  * @send_msg: routine which handles buffer transmission
78  * @enable_media: routine which enables a media
79  * @disable_media: routine which disables a media
80  * @addr2str: routine which converts media address to string
81  * @addr2msg: routine which converts media address to protocol message area
82  * @msg2addr: routine which converts media address from protocol message area
83  * @bcast_addr: media address used in broadcasting
84  * @priority: default link (and bearer) priority
85  * @tolerance: default time (in ms) before declaring link failure
86  * @window: default window (in packets) before declaring link congestion
87  * @type_id: TIPC media identifier
88  * @name: media name
89  */
90 struct tipc_media {
91 	int (*send_msg)(struct sk_buff *buf,
92 			struct tipc_bearer *b_ptr,
93 			struct tipc_media_addr *dest);
94 	int (*enable_media)(struct tipc_bearer *b_ptr);
95 	void (*disable_media)(struct tipc_bearer *b_ptr);
96 	int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
97 	int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
98 	int (*msg2addr)(const struct tipc_bearer *b_ptr,
99 			struct tipc_media_addr *a, char *msg_area);
100 	u32 priority;
101 	u32 tolerance;
102 	u32 window;
103 	u32 type_id;
104 	char name[TIPC_MAX_MEDIA_NAME];
105 };
106 
107 /**
108  * struct tipc_bearer - TIPC bearer structure
109  * @usr_handle: pointer to additional media-specific information about bearer
110  * @mtu: max packet size bearer can support
111  * @blocked: non-zero if bearer is blocked
112  * @lock: spinlock for controlling access to bearer
113  * @addr: media-specific address associated with bearer
114  * @name: bearer name (format = media:interface)
115  * @media: ptr to media structure associated with bearer
116  * @priority: default link priority for bearer
117  * @window: default window size for bearer
118  * @tolerance: default link tolerance for bearer
119  * @identity: array index of this bearer within TIPC bearer array
120  * @link_req: ptr to (optional) structure making periodic link setup requests
121  * @links: list of non-congested links associated with bearer
122  * @active: non-zero if bearer structure is represents a bearer
123  * @net_plane: network plane ('A' through 'H') currently associated with bearer
124  * @nodes: indicates which nodes in cluster can be reached through bearer
125  *
126  * Note: media-specific code is responsible for initialization of the fields
127  * indicated below when a bearer is enabled; TIPC's generic bearer code takes
128  * care of initializing all other fields.
129  */
130 struct tipc_bearer {
131 	void *usr_handle;			/* initalized by media */
132 	u32 mtu;				/* initalized by media */
133 	int blocked;				/* initalized by media */
134 	struct tipc_media_addr addr;		/* initalized by media */
135 	char name[TIPC_MAX_BEARER_NAME];
136 	spinlock_t lock;
137 	struct tipc_media *media;
138 	struct tipc_media_addr bcast_addr;
139 	u32 priority;
140 	u32 window;
141 	u32 tolerance;
142 	u32 identity;
143 	struct tipc_link_req *link_req;
144 	struct list_head links;
145 	int active;
146 	char net_plane;
147 	struct tipc_node_map nodes;
148 };
149 
150 struct tipc_bearer_names {
151 	char media_name[TIPC_MAX_MEDIA_NAME];
152 	char if_name[TIPC_MAX_IF_NAME];
153 };
154 
155 struct tipc_link;
156 
157 extern struct tipc_bearer tipc_bearers[];
158 
159 /*
160  * TIPC routines available to supported media types
161  */
162 int tipc_register_media(struct tipc_media *m_ptr);
163 
164 void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
165 
166 int  tipc_block_bearer(struct tipc_bearer *b_ptr);
167 void tipc_continue(struct tipc_bearer *tb_ptr);
168 
169 int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
170 int tipc_disable_bearer(const char *name);
171 
172 /*
173  * Routines made available to TIPC by supported media types
174  */
175 int  tipc_eth_media_start(void);
176 void tipc_eth_media_stop(void);
177 
178 #ifdef CONFIG_TIPC_MEDIA_IB
179 int  tipc_ib_media_start(void);
180 void tipc_ib_media_stop(void);
181 #else
182 static inline int tipc_ib_media_start(void) { return 0; }
183 static inline void tipc_ib_media_stop(void) { return; }
184 #endif
185 
186 int tipc_media_set_priority(const char *name, u32 new_value);
187 int tipc_media_set_window(const char *name, u32 new_value);
188 void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
189 struct sk_buff *tipc_media_get_names(void);
190 
191 struct sk_buff *tipc_bearer_get_names(void);
192 void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
193 void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
194 struct tipc_bearer *tipc_bearer_find(const char *name);
195 struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
196 struct tipc_media *tipc_media_find(const char *name);
197 int tipc_bearer_blocked(struct tipc_bearer *b_ptr);
198 void tipc_bearer_stop(void);
199 
200 /**
201  * tipc_bearer_send- sends buffer to destination over bearer
202  *
203  * IMPORTANT:
204  * The media send routine must not alter the buffer being passed in
205  * as it may be needed for later retransmission!
206  */
207 static inline void tipc_bearer_send(struct tipc_bearer *b, struct sk_buff *buf,
208 				   struct tipc_media_addr *dest)
209 {
210 	b->media->send_msg(buf, b, dest);
211 }
212 
213 #endif	/* _TIPC_BEARER_H */
214