1 // SPDX-License-Identifier: GPL-2.0 2 /* RTT/RTO calculation. 3 * 4 * Adapted from TCP for AF_RXRPC by David Howells (dhowells@redhat.com) 5 * 6 * https://tools.ietf.org/html/rfc6298 7 * https://tools.ietf.org/html/rfc1122#section-4.2.3.1 8 * http://ccr.sigcomm.org/archive/1995/jan95/ccr-9501-partridge87.pdf 9 */ 10 11 #include <linux/net.h> 12 #include "ar-internal.h" 13 14 #define RXRPC_RTO_MAX ((unsigned)(120 * HZ)) 15 #define RXRPC_TIMEOUT_INIT ((unsigned)(1*HZ)) /* RFC6298 2.1 initial RTO value */ 16 #define rxrpc_jiffies32 ((u32)jiffies) /* As rxrpc_jiffies32 */ 17 18 static u32 rxrpc_rto_min_us(struct rxrpc_peer *peer) 19 { 20 return 200; 21 } 22 23 static u32 __rxrpc_set_rto(const struct rxrpc_peer *peer) 24 { 25 return usecs_to_jiffies((peer->srtt_us >> 3) + peer->rttvar_us); 26 } 27 28 static u32 rxrpc_bound_rto(u32 rto) 29 { 30 return min(rto, RXRPC_RTO_MAX); 31 } 32 33 /* 34 * Called to compute a smoothed rtt estimate. The data fed to this 35 * routine either comes from timestamps, or from segments that were 36 * known _not_ to have been retransmitted [see Karn/Partridge 37 * Proceedings SIGCOMM 87]. The algorithm is from the SIGCOMM 88 38 * piece by Van Jacobson. 39 * NOTE: the next three routines used to be one big routine. 40 * To save cycles in the RFC 1323 implementation it was better to break 41 * it up into three procedures. -- erics 42 */ 43 static void rxrpc_rtt_estimator(struct rxrpc_peer *peer, long sample_rtt_us) 44 { 45 long m = sample_rtt_us; /* RTT */ 46 u32 srtt = peer->srtt_us; 47 48 /* The following amusing code comes from Jacobson's 49 * article in SIGCOMM '88. Note that rtt and mdev 50 * are scaled versions of rtt and mean deviation. 51 * This is designed to be as fast as possible 52 * m stands for "measurement". 53 * 54 * On a 1990 paper the rto value is changed to: 55 * RTO = rtt + 4 * mdev 56 * 57 * Funny. This algorithm seems to be very broken. 58 * These formulae increase RTO, when it should be decreased, increase 59 * too slowly, when it should be increased quickly, decrease too quickly 60 * etc. I guess in BSD RTO takes ONE value, so that it is absolutely 61 * does not matter how to _calculate_ it. Seems, it was trap 62 * that VJ failed to avoid. 8) 63 */ 64 if (srtt != 0) { 65 m -= (srtt >> 3); /* m is now error in rtt est */ 66 srtt += m; /* rtt = 7/8 rtt + 1/8 new */ 67 if (m < 0) { 68 m = -m; /* m is now abs(error) */ 69 m -= (peer->mdev_us >> 2); /* similar update on mdev */ 70 /* This is similar to one of Eifel findings. 71 * Eifel blocks mdev updates when rtt decreases. 72 * This solution is a bit different: we use finer gain 73 * for mdev in this case (alpha*beta). 74 * Like Eifel it also prevents growth of rto, 75 * but also it limits too fast rto decreases, 76 * happening in pure Eifel. 77 */ 78 if (m > 0) 79 m >>= 3; 80 } else { 81 m -= (peer->mdev_us >> 2); /* similar update on mdev */ 82 } 83 84 peer->mdev_us += m; /* mdev = 3/4 mdev + 1/4 new */ 85 if (peer->mdev_us > peer->mdev_max_us) { 86 peer->mdev_max_us = peer->mdev_us; 87 if (peer->mdev_max_us > peer->rttvar_us) 88 peer->rttvar_us = peer->mdev_max_us; 89 } 90 } else { 91 /* no previous measure. */ 92 srtt = m << 3; /* take the measured time to be rtt */ 93 peer->mdev_us = m << 1; /* make sure rto = 3*rtt */ 94 peer->rttvar_us = max(peer->mdev_us, rxrpc_rto_min_us(peer)); 95 peer->mdev_max_us = peer->rttvar_us; 96 } 97 98 peer->srtt_us = max(1U, srtt); 99 } 100 101 /* 102 * Calculate rto without backoff. This is the second half of Van Jacobson's 103 * routine referred to above. 104 */ 105 static void rxrpc_set_rto(struct rxrpc_peer *peer) 106 { 107 u32 rto; 108 109 /* 1. If rtt variance happened to be less 50msec, it is hallucination. 110 * It cannot be less due to utterly erratic ACK generation made 111 * at least by solaris and freebsd. "Erratic ACKs" has _nothing_ 112 * to do with delayed acks, because at cwnd>2 true delack timeout 113 * is invisible. Actually, Linux-2.4 also generates erratic 114 * ACKs in some circumstances. 115 */ 116 rto = __rxrpc_set_rto(peer); 117 118 /* 2. Fixups made earlier cannot be right. 119 * If we do not estimate RTO correctly without them, 120 * all the algo is pure shit and should be replaced 121 * with correct one. It is exactly, which we pretend to do. 122 */ 123 124 /* NOTE: clamping at RXRPC_RTO_MIN is not required, current algo 125 * guarantees that rto is higher. 126 */ 127 peer->rto_j = rxrpc_bound_rto(rto); 128 } 129 130 static void rxrpc_ack_update_rtt(struct rxrpc_peer *peer, long rtt_us) 131 { 132 if (rtt_us < 0) 133 return; 134 135 //rxrpc_update_rtt_min(peer, rtt_us); 136 rxrpc_rtt_estimator(peer, rtt_us); 137 rxrpc_set_rto(peer); 138 139 /* RFC6298: only reset backoff on valid RTT measurement. */ 140 peer->backoff = 0; 141 } 142 143 /* 144 * Add RTT information to cache. This is called in softirq mode and has 145 * exclusive access to the peer RTT data. 146 */ 147 void rxrpc_peer_add_rtt(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why, 148 int rtt_slot, 149 rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial, 150 ktime_t send_time, ktime_t resp_time) 151 { 152 struct rxrpc_peer *peer = call->peer; 153 s64 rtt_us; 154 155 rtt_us = ktime_to_us(ktime_sub(resp_time, send_time)); 156 if (rtt_us < 0) 157 return; 158 159 spin_lock(&peer->rtt_input_lock); 160 rxrpc_ack_update_rtt(peer, rtt_us); 161 if (peer->rtt_count < 3) 162 peer->rtt_count++; 163 spin_unlock(&peer->rtt_input_lock); 164 165 trace_rxrpc_rtt_rx(call, why, rtt_slot, send_serial, resp_serial, 166 peer->srtt_us >> 3, peer->rto_j); 167 } 168 169 /* 170 * Get the retransmission timeout to set in jiffies, backing it off each time 171 * we retransmit. 172 */ 173 unsigned long rxrpc_get_rto_backoff(struct rxrpc_peer *peer, bool retrans) 174 { 175 u64 timo_j; 176 u8 backoff = READ_ONCE(peer->backoff); 177 178 timo_j = peer->rto_j; 179 timo_j <<= backoff; 180 if (retrans && timo_j * 2 <= RXRPC_RTO_MAX) 181 WRITE_ONCE(peer->backoff, backoff + 1); 182 183 if (timo_j < 1) 184 timo_j = 1; 185 186 return timo_j; 187 } 188 189 void rxrpc_peer_init_rtt(struct rxrpc_peer *peer) 190 { 191 peer->rto_j = RXRPC_TIMEOUT_INIT; 192 peer->mdev_us = jiffies_to_usecs(RXRPC_TIMEOUT_INIT); 193 peer->backoff = 0; 194 //minmax_reset(&peer->rtt_min, rxrpc_jiffies32, ~0U); 195 } 196