1 /* 2 * NetLabel Management Support 3 * 4 * This file defines the management functions for the NetLabel system. The 5 * NetLabel system manages static and dynamic label mappings for network 6 * protocols such as CIPSO and RIPSO. 7 * 8 * Author: Paul Moore <paul.moore@hp.com> 9 * 10 */ 11 12 /* 13 * (c) Copyright Hewlett-Packard Development Company, L.P., 2006 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 23 * the GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 28 * 29 */ 30 31 #ifndef _NETLABEL_MGMT_H 32 #define _NETLABEL_MGMT_H 33 34 #include <net/netlabel.h> 35 #include <asm/atomic.h> 36 37 /* 38 * The following NetLabel payloads are supported by the management interface. 39 * 40 * o ADD: 41 * Sent by an application to add a domain mapping to the NetLabel system. 42 * 43 * Required attributes: 44 * 45 * NLBL_MGMT_A_DOMAIN 46 * NLBL_MGMT_A_PROTOCOL 47 * 48 * If IPv4 is specified the following attributes are required: 49 * 50 * NLBL_MGMT_A_IPV4ADDR 51 * NLBL_MGMT_A_IPV4MASK 52 * 53 * If IPv6 is specified the following attributes are required: 54 * 55 * NLBL_MGMT_A_IPV6ADDR 56 * NLBL_MGMT_A_IPV6MASK 57 * 58 * If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required: 59 * 60 * NLBL_MGMT_A_CV4DOI 61 * 62 * If using NETLBL_NLTYPE_UNLABELED no other attributes are required. 63 * 64 * o REMOVE: 65 * Sent by an application to remove a domain mapping from the NetLabel 66 * system. 67 * 68 * Required attributes: 69 * 70 * NLBL_MGMT_A_DOMAIN 71 * 72 * o LISTALL: 73 * This message can be sent either from an application or by the kernel in 74 * response to an application generated LISTALL message. When sent by an 75 * application there is no payload and the NLM_F_DUMP flag should be set. 76 * The kernel should respond with a series of the following messages. 77 * 78 * Required attributes: 79 * 80 * NLBL_MGMT_A_DOMAIN 81 * 82 * If the IP address selectors are not used the following attribute is 83 * required: 84 * 85 * NLBL_MGMT_A_PROTOCOL 86 * 87 * If the IP address selectors are used then the following attritbute is 88 * required: 89 * 90 * NLBL_MGMT_A_SELECTORLIST 91 * 92 * If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following 93 * attributes are required: 94 * 95 * NLBL_MGMT_A_CV4DOI 96 * 97 * If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other 98 * attributes are required. 99 * 100 * o ADDDEF: 101 * Sent by an application to set the default domain mapping for the NetLabel 102 * system. 103 * 104 * Required attributes: 105 * 106 * NLBL_MGMT_A_PROTOCOL 107 * 108 * If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required: 109 * 110 * NLBL_MGMT_A_CV4DOI 111 * 112 * If using NETLBL_NLTYPE_UNLABELED no other attributes are required. 113 * 114 * o REMOVEDEF: 115 * Sent by an application to remove the default domain mapping from the 116 * NetLabel system, there is no payload. 117 * 118 * o LISTDEF: 119 * This message can be sent either from an application or by the kernel in 120 * response to an application generated LISTDEF message. When sent by an 121 * application there is no payload. On success the kernel should send a 122 * response using the following format. 123 * 124 * If the IP address selectors are not used the following attribute is 125 * required: 126 * 127 * NLBL_MGMT_A_PROTOCOL 128 * 129 * If the IP address selectors are used then the following attritbute is 130 * required: 131 * 132 * NLBL_MGMT_A_SELECTORLIST 133 * 134 * If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following 135 * attributes are required: 136 * 137 * NLBL_MGMT_A_CV4DOI 138 * 139 * If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other 140 * attributes are required. 141 * 142 * o PROTOCOLS: 143 * Sent by an application to request a list of configured NetLabel protocols 144 * in the kernel. When sent by an application there is no payload and the 145 * NLM_F_DUMP flag should be set. The kernel should respond with a series of 146 * the following messages. 147 * 148 * Required attributes: 149 * 150 * NLBL_MGMT_A_PROTOCOL 151 * 152 * o VERSION: 153 * Sent by an application to request the NetLabel version. When sent by an 154 * application there is no payload. This message type is also used by the 155 * kernel to respond to an VERSION request. 156 * 157 * Required attributes: 158 * 159 * NLBL_MGMT_A_VERSION 160 * 161 */ 162 163 /* NetLabel Management commands */ 164 enum { 165 NLBL_MGMT_C_UNSPEC, 166 NLBL_MGMT_C_ADD, 167 NLBL_MGMT_C_REMOVE, 168 NLBL_MGMT_C_LISTALL, 169 NLBL_MGMT_C_ADDDEF, 170 NLBL_MGMT_C_REMOVEDEF, 171 NLBL_MGMT_C_LISTDEF, 172 NLBL_MGMT_C_PROTOCOLS, 173 NLBL_MGMT_C_VERSION, 174 __NLBL_MGMT_C_MAX, 175 }; 176 177 /* NetLabel Management attributes */ 178 enum { 179 NLBL_MGMT_A_UNSPEC, 180 NLBL_MGMT_A_DOMAIN, 181 /* (NLA_NUL_STRING) 182 * the NULL terminated LSM domain string */ 183 NLBL_MGMT_A_PROTOCOL, 184 /* (NLA_U32) 185 * the NetLabel protocol type (defined by NETLBL_NLTYPE_*) */ 186 NLBL_MGMT_A_VERSION, 187 /* (NLA_U32) 188 * the NetLabel protocol version number (defined by 189 * NETLBL_PROTO_VERSION) */ 190 NLBL_MGMT_A_CV4DOI, 191 /* (NLA_U32) 192 * the CIPSOv4 DOI value */ 193 NLBL_MGMT_A_IPV6ADDR, 194 /* (NLA_BINARY, struct in6_addr) 195 * an IPv6 address */ 196 NLBL_MGMT_A_IPV6MASK, 197 /* (NLA_BINARY, struct in6_addr) 198 * an IPv6 address mask */ 199 NLBL_MGMT_A_IPV4ADDR, 200 /* (NLA_BINARY, struct in_addr) 201 * an IPv4 address */ 202 NLBL_MGMT_A_IPV4MASK, 203 /* (NLA_BINARY, struct in_addr) 204 * and IPv4 address mask */ 205 NLBL_MGMT_A_ADDRSELECTOR, 206 /* (NLA_NESTED) 207 * an IP address selector, must contain an address, mask, and protocol 208 * attribute plus any protocol specific attributes */ 209 NLBL_MGMT_A_SELECTORLIST, 210 /* (NLA_NESTED) 211 * the selector list, there must be at least one 212 * NLBL_MGMT_A_ADDRSELECTOR attribute */ 213 __NLBL_MGMT_A_MAX, 214 }; 215 #define NLBL_MGMT_A_MAX (__NLBL_MGMT_A_MAX - 1) 216 217 /* NetLabel protocol functions */ 218 int netlbl_mgmt_genl_init(void); 219 220 /* NetLabel configured protocol reference counter */ 221 extern atomic_t netlabel_mgmt_protocount; 222 223 #endif 224