1menu "Core Netfilter Configuration" 2 depends on NET && INET && NETFILTER 3 4config NETFILTER_INGRESS 5 bool "Netfilter ingress support" 6 default y 7 select NET_INGRESS 8 help 9 This allows you to classify packets from ingress using the Netfilter 10 infrastructure. 11 12config NETFILTER_NETLINK 13 tristate 14 15config NETFILTER_FAMILY_BRIDGE 16 bool 17 18config NETFILTER_FAMILY_ARP 19 bool 20 21config NETFILTER_NETLINK_ACCT 22tristate "Netfilter NFACCT over NFNETLINK interface" 23 depends on NETFILTER_ADVANCED 24 select NETFILTER_NETLINK 25 help 26 If this option is enabled, the kernel will include support 27 for extended accounting via NFNETLINK. 28 29config NETFILTER_NETLINK_QUEUE 30 tristate "Netfilter NFQUEUE over NFNETLINK interface" 31 depends on NETFILTER_ADVANCED 32 select NETFILTER_NETLINK 33 help 34 If this option is enabled, the kernel will include support 35 for queueing packets via NFNETLINK. 36 37config NETFILTER_NETLINK_LOG 38 tristate "Netfilter LOG over NFNETLINK interface" 39 default m if NETFILTER_ADVANCED=n 40 select NETFILTER_NETLINK 41 help 42 If this option is enabled, the kernel will include support 43 for logging packets via NFNETLINK. 44 45 This obsoletes the existing ipt_ULOG and ebg_ulog mechanisms, 46 and is also scheduled to replace the old syslog-based ipt_LOG 47 and ip6t_LOG modules. 48 49config NF_CONNTRACK 50 tristate "Netfilter connection tracking support" 51 default m if NETFILTER_ADVANCED=n 52 help 53 Connection tracking keeps a record of what packets have passed 54 through your machine, in order to figure out how they are related 55 into connections. 56 57 This is required to do Masquerading or other kinds of Network 58 Address Translation. It can also be used to enhance packet 59 filtering (see `Connection state match support' below). 60 61 To compile it as a module, choose M here. If unsure, say N. 62 63config NF_LOG_COMMON 64 tristate 65 66config NF_LOG_NETDEV 67 tristate "Netdev packet logging" 68 select NF_LOG_COMMON 69 70if NF_CONNTRACK 71config NETFILTER_CONNCOUNT 72 tristate 73 74config NF_CONNTRACK_MARK 75 bool 'Connection mark tracking support' 76 depends on NETFILTER_ADVANCED 77 help 78 This option enables support for connection marks, used by the 79 `CONNMARK' target and `connmark' match. Similar to the mark value 80 of packets, but this mark value is kept in the conntrack session 81 instead of the individual packets. 82 83config NF_CONNTRACK_SECMARK 84 bool 'Connection tracking security mark support' 85 depends on NETWORK_SECMARK 86 default m if NETFILTER_ADVANCED=n 87 help 88 This option enables security markings to be applied to 89 connections. Typically they are copied to connections from 90 packets using the CONNSECMARK target and copied back from 91 connections to packets with the same target, with the packets 92 being originally labeled via SECMARK. 93 94 If unsure, say 'N'. 95 96config NF_CONNTRACK_ZONES 97 bool 'Connection tracking zones' 98 depends on NETFILTER_ADVANCED 99 depends on NETFILTER_XT_TARGET_CT 100 help 101 This option enables support for connection tracking zones. 102 Normally, each connection needs to have a unique system wide 103 identity. Connection tracking zones allow to have multiple 104 connections using the same identity, as long as they are 105 contained in different zones. 106 107 If unsure, say `N'. 108 109config NF_CONNTRACK_PROCFS 110 bool "Supply CT list in procfs (OBSOLETE)" 111 default y 112 depends on PROC_FS 113 ---help--- 114 This option enables for the list of known conntrack entries 115 to be shown in procfs under net/netfilter/nf_conntrack. This 116 is considered obsolete in favor of using the conntrack(8) 117 tool which uses Netlink. 118 119config NF_CONNTRACK_EVENTS 120 bool "Connection tracking events" 121 depends on NETFILTER_ADVANCED 122 help 123 If this option is enabled, the connection tracking code will 124 provide a notifier chain that can be used by other kernel code 125 to get notified about changes in the connection tracking state. 126 127 If unsure, say `N'. 128 129config NF_CONNTRACK_TIMEOUT 130 bool 'Connection tracking timeout' 131 depends on NETFILTER_ADVANCED 132 help 133 This option enables support for connection tracking timeout 134 extension. This allows you to attach timeout policies to flow 135 via the CT target. 136 137 If unsure, say `N'. 138 139config NF_CONNTRACK_TIMESTAMP 140 bool 'Connection tracking timestamping' 141 depends on NETFILTER_ADVANCED 142 help 143 This option enables support for connection tracking timestamping. 144 This allows you to store the flow start-time and to obtain 145 the flow-stop time (once it has been destroyed) via Connection 146 tracking events. 147 148 If unsure, say `N'. 149 150config NF_CONNTRACK_LABELS 151 bool 152 help 153 This option enables support for assigning user-defined flag bits 154 to connection tracking entries. It selected by the connlabel match. 155 156config NF_CT_PROTO_DCCP 157 bool 'DCCP protocol connection tracking support' 158 depends on NETFILTER_ADVANCED 159 default y 160 help 161 With this option enabled, the layer 3 independent connection 162 tracking code will be able to do state tracking on DCCP connections. 163 164 If unsure, say Y. 165 166config NF_CT_PROTO_GRE 167 tristate 168 169config NF_CT_PROTO_SCTP 170 bool 'SCTP protocol connection tracking support' 171 depends on NETFILTER_ADVANCED 172 default y 173 select LIBCRC32C 174 help 175 With this option enabled, the layer 3 independent connection 176 tracking code will be able to do state tracking on SCTP connections. 177 178 If unsure, say Y. 179 180config NF_CT_PROTO_UDPLITE 181 bool 'UDP-Lite protocol connection tracking support' 182 depends on NETFILTER_ADVANCED 183 default y 184 help 185 With this option enabled, the layer 3 independent connection 186 tracking code will be able to do state tracking on UDP-Lite 187 connections. 188 189 If unsure, say Y. 190 191config NF_CONNTRACK_AMANDA 192 tristate "Amanda backup protocol support" 193 depends on NETFILTER_ADVANCED 194 select TEXTSEARCH 195 select TEXTSEARCH_KMP 196 help 197 If you are running the Amanda backup package <http://www.amanda.org/> 198 on this machine or machines that will be MASQUERADED through this 199 machine, then you may want to enable this feature. This allows the 200 connection tracking and natting code to allow the sub-channels that 201 Amanda requires for communication of the backup data, messages and 202 index. 203 204 To compile it as a module, choose M here. If unsure, say N. 205 206config NF_CONNTRACK_FTP 207 tristate "FTP protocol support" 208 default m if NETFILTER_ADVANCED=n 209 help 210 Tracking FTP connections is problematic: special helpers are 211 required for tracking them, and doing masquerading and other forms 212 of Network Address Translation on them. 213 214 This is FTP support on Layer 3 independent connection tracking. 215 Layer 3 independent connection tracking is experimental scheme 216 which generalize ip_conntrack to support other layer 3 protocols. 217 218 To compile it as a module, choose M here. If unsure, say N. 219 220config NF_CONNTRACK_H323 221 tristate "H.323 protocol support" 222 depends on IPV6 || IPV6=n 223 depends on NETFILTER_ADVANCED 224 help 225 H.323 is a VoIP signalling protocol from ITU-T. As one of the most 226 important VoIP protocols, it is widely used by voice hardware and 227 software including voice gateways, IP phones, Netmeeting, OpenPhone, 228 Gnomemeeting, etc. 229 230 With this module you can support H.323 on a connection tracking/NAT 231 firewall. 232 233 This module supports RAS, Fast Start, H.245 Tunnelling, Call 234 Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, 235 whiteboard, file transfer, etc. For more information, please 236 visit http://nath323.sourceforge.net/. 237 238 To compile it as a module, choose M here. If unsure, say N. 239 240config NF_CONNTRACK_IRC 241 tristate "IRC protocol support" 242 default m if NETFILTER_ADVANCED=n 243 help 244 There is a commonly-used extension to IRC called 245 Direct Client-to-Client Protocol (DCC). This enables users to send 246 files to each other, and also chat to each other without the need 247 of a server. DCC Sending is used anywhere you send files over IRC, 248 and DCC Chat is most commonly used by Eggdrop bots. If you are 249 using NAT, this extension will enable you to send files and initiate 250 chats. Note that you do NOT need this extension to get files or 251 have others initiate chats, or everything else in IRC. 252 253 To compile it as a module, choose M here. If unsure, say N. 254 255config NF_CONNTRACK_BROADCAST 256 tristate 257 258config NF_CONNTRACK_NETBIOS_NS 259 tristate "NetBIOS name service protocol support" 260 select NF_CONNTRACK_BROADCAST 261 help 262 NetBIOS name service requests are sent as broadcast messages from an 263 unprivileged port and responded to with unicast messages to the 264 same port. This make them hard to firewall properly because connection 265 tracking doesn't deal with broadcasts. This helper tracks locally 266 originating NetBIOS name service requests and the corresponding 267 responses. It relies on correct IP address configuration, specifically 268 netmask and broadcast address. When properly configured, the output 269 of "ip address show" should look similar to this: 270 271 $ ip -4 address show eth0 272 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 273 inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 274 275 To compile it as a module, choose M here. If unsure, say N. 276 277config NF_CONNTRACK_SNMP 278 tristate "SNMP service protocol support" 279 depends on NETFILTER_ADVANCED 280 select NF_CONNTRACK_BROADCAST 281 help 282 SNMP service requests are sent as broadcast messages from an 283 unprivileged port and responded to with unicast messages to the 284 same port. This make them hard to firewall properly because connection 285 tracking doesn't deal with broadcasts. This helper tracks locally 286 originating SNMP service requests and the corresponding 287 responses. It relies on correct IP address configuration, specifically 288 netmask and broadcast address. 289 290 To compile it as a module, choose M here. If unsure, say N. 291 292config NF_CONNTRACK_PPTP 293 tristate "PPtP protocol support" 294 depends on NETFILTER_ADVANCED 295 select NF_CT_PROTO_GRE 296 help 297 This module adds support for PPTP (Point to Point Tunnelling 298 Protocol, RFC2637) connection tracking and NAT. 299 300 If you are running PPTP sessions over a stateful firewall or NAT 301 box, you may want to enable this feature. 302 303 Please note that not all PPTP modes of operation are supported yet. 304 Specifically these limitations exist: 305 - Blindly assumes that control connections are always established 306 in PNS->PAC direction. This is a violation of RFC2637. 307 - Only supports a single call within each session 308 309 To compile it as a module, choose M here. If unsure, say N. 310 311config NF_CONNTRACK_SANE 312 tristate "SANE protocol support" 313 depends on NETFILTER_ADVANCED 314 help 315 SANE is a protocol for remote access to scanners as implemented 316 by the 'saned' daemon. Like FTP, it uses separate control and 317 data connections. 318 319 With this module you can support SANE on a connection tracking 320 firewall. 321 322 To compile it as a module, choose M here. If unsure, say N. 323 324config NF_CONNTRACK_SIP 325 tristate "SIP protocol support" 326 default m if NETFILTER_ADVANCED=n 327 help 328 SIP is an application-layer control protocol that can establish, 329 modify, and terminate multimedia sessions (conferences) such as 330 Internet telephony calls. With the ip_conntrack_sip and 331 the nf_nat_sip modules you can support the protocol on a connection 332 tracking/NATing firewall. 333 334 To compile it as a module, choose M here. If unsure, say N. 335 336config NF_CONNTRACK_TFTP 337 tristate "TFTP protocol support" 338 depends on NETFILTER_ADVANCED 339 help 340 TFTP connection tracking helper, this is required depending 341 on how restrictive your ruleset is. 342 If you are using a tftp client behind -j SNAT or -j MASQUERADING 343 you will need this. 344 345 To compile it as a module, choose M here. If unsure, say N. 346 347config NF_CT_NETLINK 348 tristate 'Connection tracking netlink interface' 349 select NETFILTER_NETLINK 350 default m if NETFILTER_ADVANCED=n 351 help 352 This option enables support for a netlink-based userspace interface 353 354config NF_CT_NETLINK_TIMEOUT 355 tristate 'Connection tracking timeout tuning via Netlink' 356 select NETFILTER_NETLINK 357 depends on NETFILTER_ADVANCED 358 help 359 This option enables support for connection tracking timeout 360 fine-grain tuning. This allows you to attach specific timeout 361 policies to flows, instead of using the global timeout policy. 362 363 If unsure, say `N'. 364 365config NF_CT_NETLINK_HELPER 366 tristate 'Connection tracking helpers in user-space via Netlink' 367 select NETFILTER_NETLINK 368 depends on NF_CT_NETLINK 369 depends on NETFILTER_NETLINK_QUEUE 370 depends on NETFILTER_NETLINK_GLUE_CT 371 depends on NETFILTER_ADVANCED 372 help 373 This option enables the user-space connection tracking helpers 374 infrastructure. 375 376 If unsure, say `N'. 377 378config NETFILTER_NETLINK_GLUE_CT 379 bool "NFQUEUE and NFLOG integration with Connection Tracking" 380 default n 381 depends on (NETFILTER_NETLINK_QUEUE || NETFILTER_NETLINK_LOG) && NF_CT_NETLINK 382 help 383 If this option is enabled, NFQUEUE and NFLOG can include 384 Connection Tracking information together with the packet is 385 the enqueued via NFNETLINK. 386 387config NF_NAT 388 tristate 389 390config NF_NAT_NEEDED 391 bool 392 depends on NF_NAT 393 default y 394 395config NF_NAT_PROTO_DCCP 396 bool 397 depends on NF_NAT && NF_CT_PROTO_DCCP 398 default NF_NAT && NF_CT_PROTO_DCCP 399 400config NF_NAT_PROTO_UDPLITE 401 bool 402 depends on NF_NAT && NF_CT_PROTO_UDPLITE 403 default NF_NAT && NF_CT_PROTO_UDPLITE 404 405config NF_NAT_PROTO_SCTP 406 bool 407 default NF_NAT && NF_CT_PROTO_SCTP 408 depends on NF_NAT && NF_CT_PROTO_SCTP 409 410config NF_NAT_AMANDA 411 tristate 412 depends on NF_CONNTRACK && NF_NAT 413 default NF_NAT && NF_CONNTRACK_AMANDA 414 415config NF_NAT_FTP 416 tristate 417 depends on NF_CONNTRACK && NF_NAT 418 default NF_NAT && NF_CONNTRACK_FTP 419 420config NF_NAT_IRC 421 tristate 422 depends on NF_CONNTRACK && NF_NAT 423 default NF_NAT && NF_CONNTRACK_IRC 424 425config NF_NAT_SIP 426 tristate 427 depends on NF_CONNTRACK && NF_NAT 428 default NF_NAT && NF_CONNTRACK_SIP 429 430config NF_NAT_TFTP 431 tristate 432 depends on NF_CONNTRACK && NF_NAT 433 default NF_NAT && NF_CONNTRACK_TFTP 434 435config NF_NAT_REDIRECT 436 tristate "IPv4/IPv6 redirect support" 437 depends on NF_NAT 438 help 439 This is the kernel functionality to redirect packets to local 440 machine through NAT. 441 442config NETFILTER_SYNPROXY 443 tristate 444 445endif # NF_CONNTRACK 446 447config NF_TABLES 448 select NETFILTER_NETLINK 449 tristate "Netfilter nf_tables support" 450 help 451 nftables is the new packet classification framework that intends to 452 replace the existing {ip,ip6,arp,eb}_tables infrastructure. It 453 provides a pseudo-state machine with an extensible instruction-set 454 (also known as expressions) that the userspace 'nft' utility 455 (http://www.netfilter.org/projects/nftables) uses to build the 456 rule-set. It also comes with the generic set infrastructure that 457 allows you to construct mappings between matchings and actions 458 for performance lookups. 459 460 To compile it as a module, choose M here. 461 462if NF_TABLES 463 464config NF_TABLES_INET 465 depends on IPV6 466 select NF_TABLES_IPV4 467 select NF_TABLES_IPV6 468 bool "Netfilter nf_tables mixed IPv4/IPv6 tables support" 469 help 470 This option enables support for a mixed IPv4/IPv6 "inet" table. 471 472config NF_TABLES_NETDEV 473 bool "Netfilter nf_tables netdev tables support" 474 help 475 This option enables support for the "netdev" table. 476 477config NFT_EXTHDR 478 tristate "Netfilter nf_tables exthdr module" 479 help 480 This option adds the "exthdr" expression that you can use to match 481 IPv6 extension headers and tcp options. 482 483config NFT_META 484 tristate "Netfilter nf_tables meta module" 485 help 486 This option adds the "meta" expression that you can use to match and 487 to set packet metainformation such as the packet mark. 488 489config NFT_RT 490 tristate "Netfilter nf_tables routing module" 491 help 492 This option adds the "rt" expression that you can use to match 493 packet routing information such as the packet nexthop. 494 495config NFT_NUMGEN 496 tristate "Netfilter nf_tables number generator module" 497 help 498 This option adds the number generator expression used to perform 499 incremental counting and random numbers bound to a upper limit. 500 501config NFT_CT 502 depends on NF_CONNTRACK 503 tristate "Netfilter nf_tables conntrack module" 504 help 505 This option adds the "ct" expression that you can use to match 506 connection tracking information such as the flow state. 507 508config NFT_FLOW_OFFLOAD 509 depends on NF_CONNTRACK && NF_FLOW_TABLE 510 tristate "Netfilter nf_tables hardware flow offload module" 511 help 512 This option adds the "flow_offload" expression that you can use to 513 choose what flows are placed into the hardware. 514 515config NFT_SET_RBTREE 516 tristate "Netfilter nf_tables rbtree set module" 517 help 518 This option adds the "rbtree" set type (Red Black tree) that is used 519 to build interval-based sets. 520 521config NFT_SET_HASH 522 tristate "Netfilter nf_tables hash set module" 523 help 524 This option adds the "hash" set type that is used to build one-way 525 mappings between matchings and actions. 526 527config NFT_SET_BITMAP 528 tristate "Netfilter nf_tables bitmap set module" 529 help 530 This option adds the "bitmap" set type that is used to build sets 531 whose keys are smaller or equal to 16 bits. 532 533config NFT_COUNTER 534 tristate "Netfilter nf_tables counter module" 535 help 536 This option adds the "counter" expression that you can use to 537 include packet and byte counters in a rule. 538 539config NFT_LOG 540 tristate "Netfilter nf_tables log module" 541 help 542 This option adds the "log" expression that you can use to log 543 packets matching some criteria. 544 545config NFT_LIMIT 546 tristate "Netfilter nf_tables limit module" 547 help 548 This option adds the "limit" expression that you can use to 549 ratelimit rule matchings. 550 551config NFT_MASQ 552 depends on NF_CONNTRACK 553 depends on NF_NAT 554 tristate "Netfilter nf_tables masquerade support" 555 help 556 This option adds the "masquerade" expression that you can use 557 to perform NAT in the masquerade flavour. 558 559config NFT_REDIR 560 depends on NF_CONNTRACK 561 depends on NF_NAT 562 tristate "Netfilter nf_tables redirect support" 563 help 564 This options adds the "redirect" expression that you can use 565 to perform NAT in the redirect flavour. 566 567config NFT_NAT 568 depends on NF_CONNTRACK 569 select NF_NAT 570 tristate "Netfilter nf_tables nat module" 571 help 572 This option adds the "nat" expression that you can use to perform 573 typical Network Address Translation (NAT) packet transformations. 574 575config NFT_OBJREF 576 tristate "Netfilter nf_tables stateful object reference module" 577 help 578 This option adds the "objref" expression that allows you to refer to 579 stateful objects, such as counters and quotas. 580 581config NFT_QUEUE 582 depends on NETFILTER_NETLINK_QUEUE 583 tristate "Netfilter nf_tables queue module" 584 help 585 This is required if you intend to use the userspace queueing 586 infrastructure (also known as NFQUEUE) from nftables. 587 588config NFT_QUOTA 589 tristate "Netfilter nf_tables quota module" 590 help 591 This option adds the "quota" expression that you can use to match 592 enforce bytes quotas. 593 594config NFT_REJECT 595 default m if NETFILTER_ADVANCED=n 596 tristate "Netfilter nf_tables reject support" 597 help 598 This option adds the "reject" expression that you can use to 599 explicitly deny and notify via TCP reset/ICMP informational errors 600 unallowed traffic. 601 602config NFT_REJECT_INET 603 depends on NF_TABLES_INET 604 default NFT_REJECT 605 tristate 606 607config NFT_COMPAT 608 depends on NETFILTER_XTABLES 609 tristate "Netfilter x_tables over nf_tables module" 610 help 611 This is required if you intend to use any of existing 612 x_tables match/target extensions over the nf_tables 613 framework. 614 615config NFT_HASH 616 tristate "Netfilter nf_tables hash module" 617 help 618 This option adds the "hash" expression that you can use to perform 619 a hash operation on registers. 620 621config NFT_FIB 622 tristate 623 624config NFT_FIB_INET 625 depends on NF_TABLES_INET 626 depends on NFT_FIB_IPV4 627 depends on NFT_FIB_IPV6 628 tristate "Netfilter nf_tables fib inet support" 629 help 630 This option allows using the FIB expression from the inet table. 631 The lookup will be delegated to the IPv4 or IPv6 FIB depending 632 on the protocol of the packet. 633 634if NF_TABLES_NETDEV 635 636config NF_DUP_NETDEV 637 tristate "Netfilter packet duplication support" 638 help 639 This option enables the generic packet duplication infrastructure 640 for Netfilter. 641 642config NFT_DUP_NETDEV 643 tristate "Netfilter nf_tables netdev packet duplication support" 644 select NF_DUP_NETDEV 645 help 646 This option enables packet duplication for the "netdev" family. 647 648config NFT_FWD_NETDEV 649 tristate "Netfilter nf_tables netdev packet forwarding support" 650 select NF_DUP_NETDEV 651 help 652 This option enables packet forwarding for the "netdev" family. 653 654config NFT_FIB_NETDEV 655 depends on NFT_FIB_IPV4 656 depends on NFT_FIB_IPV6 657 tristate "Netfilter nf_tables netdev fib lookups support" 658 help 659 This option allows using the FIB expression from the netdev table. 660 The lookup will be delegated to the IPv4 or IPv6 FIB depending 661 on the protocol of the packet. 662 663endif # NF_TABLES_NETDEV 664 665endif # NF_TABLES 666 667config NF_FLOW_TABLE_INET 668 tristate "Netfilter flow table mixed IPv4/IPv6 module" 669 depends on NF_FLOW_TABLE_IPV4 670 depends on NF_FLOW_TABLE_IPV6 671 help 672 This option adds the flow table mixed IPv4/IPv6 support. 673 674 To compile it as a module, choose M here. 675 676config NF_FLOW_TABLE 677 tristate "Netfilter flow table module" 678 depends on NETFILTER_INGRESS 679 depends on NF_CONNTRACK 680 depends on NF_TABLES 681 help 682 This option adds the flow table core infrastructure. 683 684 To compile it as a module, choose M here. 685 686config NETFILTER_XTABLES 687 tristate "Netfilter Xtables support (required for ip_tables)" 688 default m if NETFILTER_ADVANCED=n 689 help 690 This is required if you intend to use any of ip_tables, 691 ip6_tables or arp_tables. 692 693if NETFILTER_XTABLES 694 695comment "Xtables combined modules" 696 697config NETFILTER_XT_MARK 698 tristate 'nfmark target and match support' 699 default m if NETFILTER_ADVANCED=n 700 ---help--- 701 This option adds the "MARK" target and "mark" match. 702 703 Netfilter mark matching allows you to match packets based on the 704 "nfmark" value in the packet. 705 The target allows you to create rules in the "mangle" table which alter 706 the netfilter mark (nfmark) field associated with the packet. 707 708 Prior to routing, the nfmark can influence the routing method and can 709 also be used by other subsystems to change their behavior. 710 711config NETFILTER_XT_CONNMARK 712 tristate 'ctmark target and match support' 713 depends on NF_CONNTRACK 714 depends on NETFILTER_ADVANCED 715 select NF_CONNTRACK_MARK 716 ---help--- 717 This option adds the "CONNMARK" target and "connmark" match. 718 719 Netfilter allows you to store a mark value per connection (a.k.a. 720 ctmark), similarly to the packet mark (nfmark). Using this 721 target and match, you can set and match on this mark. 722 723config NETFILTER_XT_SET 724 tristate 'set target and match support' 725 depends on IP_SET 726 depends on NETFILTER_ADVANCED 727 help 728 This option adds the "SET" target and "set" match. 729 730 Using this target and match, you can add/delete and match 731 elements in the sets created by ipset(8). 732 733 To compile it as a module, choose M here. If unsure, say N. 734 735# alphabetically ordered list of targets 736 737comment "Xtables targets" 738 739config NETFILTER_XT_TARGET_AUDIT 740 tristate "AUDIT target support" 741 depends on AUDIT 742 depends on NETFILTER_ADVANCED 743 ---help--- 744 This option adds a 'AUDIT' target, which can be used to create 745 audit records for packets dropped/accepted. 746 747 To compileit as a module, choose M here. If unsure, say N. 748 749config NETFILTER_XT_TARGET_CHECKSUM 750 tristate "CHECKSUM target support" 751 depends on IP_NF_MANGLE || IP6_NF_MANGLE 752 depends on NETFILTER_ADVANCED 753 ---help--- 754 This option adds a `CHECKSUM' target, which can be used in the iptables mangle 755 table. 756 757 You can use this target to compute and fill in the checksum in 758 a packet that lacks a checksum. This is particularly useful, 759 if you need to work around old applications such as dhcp clients, 760 that do not work well with checksum offloads, but don't want to disable 761 checksum offload in your device. 762 763 To compile it as a module, choose M here. If unsure, say N. 764 765config NETFILTER_XT_TARGET_CLASSIFY 766 tristate '"CLASSIFY" target support' 767 depends on NETFILTER_ADVANCED 768 help 769 This option adds a `CLASSIFY' target, which enables the user to set 770 the priority of a packet. Some qdiscs can use this value for 771 classification, among these are: 772 773 atm, cbq, dsmark, pfifo_fast, htb, prio 774 775 To compile it as a module, choose M here. If unsure, say N. 776 777config NETFILTER_XT_TARGET_CONNMARK 778 tristate '"CONNMARK" target support' 779 depends on NF_CONNTRACK 780 depends on NETFILTER_ADVANCED 781 select NETFILTER_XT_CONNMARK 782 ---help--- 783 This is a backwards-compat option for the user's convenience 784 (e.g. when running oldconfig). It selects 785 CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). 786 787config NETFILTER_XT_TARGET_CONNSECMARK 788 tristate '"CONNSECMARK" target support' 789 depends on NF_CONNTRACK && NF_CONNTRACK_SECMARK 790 default m if NETFILTER_ADVANCED=n 791 help 792 The CONNSECMARK target copies security markings from packets 793 to connections, and restores security markings from connections 794 to packets (if the packets are not already marked). This would 795 normally be used in conjunction with the SECMARK target. 796 797 To compile it as a module, choose M here. If unsure, say N. 798 799config NETFILTER_XT_TARGET_CT 800 tristate '"CT" target support' 801 depends on NF_CONNTRACK 802 depends on IP_NF_RAW || IP6_NF_RAW 803 depends on NETFILTER_ADVANCED 804 help 805 This options adds a `CT' target, which allows to specify initial 806 connection tracking parameters like events to be delivered and 807 the helper to be used. 808 809 To compile it as a module, choose M here. If unsure, say N. 810 811config NETFILTER_XT_TARGET_DSCP 812 tristate '"DSCP" and "TOS" target support' 813 depends on IP_NF_MANGLE || IP6_NF_MANGLE 814 depends on NETFILTER_ADVANCED 815 help 816 This option adds a `DSCP' target, which allows you to manipulate 817 the IPv4/IPv6 header DSCP field (differentiated services codepoint). 818 819 The DSCP field can have any value between 0x0 and 0x3f inclusive. 820 821 It also adds the "TOS" target, which allows you to create rules in 822 the "mangle" table which alter the Type Of Service field of an IPv4 823 or the Priority field of an IPv6 packet, prior to routing. 824 825 To compile it as a module, choose M here. If unsure, say N. 826 827config NETFILTER_XT_TARGET_HL 828 tristate '"HL" hoplimit target support' 829 depends on IP_NF_MANGLE || IP6_NF_MANGLE 830 depends on NETFILTER_ADVANCED 831 ---help--- 832 This option adds the "HL" (for IPv6) and "TTL" (for IPv4) 833 targets, which enable the user to change the 834 hoplimit/time-to-live value of the IP header. 835 836 While it is safe to decrement the hoplimit/TTL value, the 837 modules also allow to increment and set the hoplimit value of 838 the header to arbitrary values. This is EXTREMELY DANGEROUS 839 since you can easily create immortal packets that loop 840 forever on the network. 841 842config NETFILTER_XT_TARGET_HMARK 843 tristate '"HMARK" target support' 844 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 845 depends on NETFILTER_ADVANCED 846 ---help--- 847 This option adds the "HMARK" target. 848 849 The target allows you to create rules in the "raw" and "mangle" tables 850 which set the skbuff mark by means of hash calculation within a given 851 range. The nfmark can influence the routing method and can also be used 852 by other subsystems to change their behaviour. 853 854 To compile it as a module, choose M here. If unsure, say N. 855 856config NETFILTER_XT_TARGET_IDLETIMER 857 tristate "IDLETIMER target support" 858 depends on NETFILTER_ADVANCED 859 help 860 861 This option adds the `IDLETIMER' target. Each matching packet 862 resets the timer associated with label specified when the rule is 863 added. When the timer expires, it triggers a sysfs notification. 864 The remaining time for expiration can be read via sysfs. 865 866 To compile it as a module, choose M here. If unsure, say N. 867 868config NETFILTER_XT_TARGET_LED 869 tristate '"LED" target support' 870 depends on LEDS_CLASS && LEDS_TRIGGERS 871 depends on NETFILTER_ADVANCED 872 help 873 This option adds a `LED' target, which allows you to blink LEDs in 874 response to particular packets passing through your machine. 875 876 This can be used to turn a spare LED into a network activity LED, 877 which only flashes in response to FTP transfers, for example. Or 878 you could have an LED which lights up for a minute or two every time 879 somebody connects to your machine via SSH. 880 881 You will need support for the "led" class to make this work. 882 883 To create an LED trigger for incoming SSH traffic: 884 iptables -A INPUT -p tcp --dport 22 -j LED --led-trigger-id ssh --led-delay 1000 885 886 Then attach the new trigger to an LED on your system: 887 echo netfilter-ssh > /sys/class/leds/<ledname>/trigger 888 889 For more information on the LEDs available on your system, see 890 Documentation/leds/leds-class.txt 891 892config NETFILTER_XT_TARGET_LOG 893 tristate "LOG target support" 894 select NF_LOG_COMMON 895 select NF_LOG_IPV4 896 select NF_LOG_IPV6 if IPV6 897 default m if NETFILTER_ADVANCED=n 898 help 899 This option adds a `LOG' target, which allows you to create rules in 900 any iptables table which records the packet header to the syslog. 901 902 To compile it as a module, choose M here. If unsure, say N. 903 904config NETFILTER_XT_TARGET_MARK 905 tristate '"MARK" target support' 906 depends on NETFILTER_ADVANCED 907 select NETFILTER_XT_MARK 908 ---help--- 909 This is a backwards-compat option for the user's convenience 910 (e.g. when running oldconfig). It selects 911 CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). 912 913config NETFILTER_XT_NAT 914 tristate '"SNAT and DNAT" targets support' 915 depends on NF_NAT 916 ---help--- 917 This option enables the SNAT and DNAT targets. 918 919 To compile it as a module, choose M here. If unsure, say N. 920 921config NETFILTER_XT_TARGET_NETMAP 922 tristate '"NETMAP" target support' 923 depends on NF_NAT 924 ---help--- 925 NETMAP is an implementation of static 1:1 NAT mapping of network 926 addresses. It maps the network address part, while keeping the host 927 address part intact. 928 929 To compile it as a module, choose M here. If unsure, say N. 930 931config NETFILTER_XT_TARGET_NFLOG 932 tristate '"NFLOG" target support' 933 default m if NETFILTER_ADVANCED=n 934 select NETFILTER_NETLINK_LOG 935 help 936 This option enables the NFLOG target, which allows to LOG 937 messages through nfnetlink_log. 938 939 To compile it as a module, choose M here. If unsure, say N. 940 941config NETFILTER_XT_TARGET_NFQUEUE 942 tristate '"NFQUEUE" target Support' 943 depends on NETFILTER_ADVANCED 944 select NETFILTER_NETLINK_QUEUE 945 help 946 This target replaced the old obsolete QUEUE target. 947 948 As opposed to QUEUE, it supports 65535 different queues, 949 not just one. 950 951 To compile it as a module, choose M here. If unsure, say N. 952 953config NETFILTER_XT_TARGET_NOTRACK 954 tristate '"NOTRACK" target support (DEPRECATED)' 955 depends on NF_CONNTRACK 956 depends on IP_NF_RAW || IP6_NF_RAW 957 depends on NETFILTER_ADVANCED 958 select NETFILTER_XT_TARGET_CT 959 960config NETFILTER_XT_TARGET_RATEEST 961 tristate '"RATEEST" target support' 962 depends on NETFILTER_ADVANCED 963 help 964 This option adds a `RATEEST' target, which allows to measure 965 rates similar to TC estimators. The `rateest' match can be 966 used to match on the measured rates. 967 968 To compile it as a module, choose M here. If unsure, say N. 969 970config NETFILTER_XT_TARGET_REDIRECT 971 tristate "REDIRECT target support" 972 depends on NF_NAT 973 select NF_NAT_REDIRECT 974 ---help--- 975 REDIRECT is a special case of NAT: all incoming connections are 976 mapped onto the incoming interface's address, causing the packets to 977 come to the local machine instead of passing through. This is 978 useful for transparent proxies. 979 980 To compile it as a module, choose M here. If unsure, say N. 981 982config NETFILTER_XT_TARGET_TEE 983 tristate '"TEE" - packet cloning to alternate destination' 984 depends on NETFILTER_ADVANCED 985 depends on IPV6 || IPV6=n 986 depends on !NF_CONNTRACK || NF_CONNTRACK 987 select NF_DUP_IPV4 988 select NF_DUP_IPV6 if IPV6 989 ---help--- 990 This option adds a "TEE" target with which a packet can be cloned and 991 this clone be rerouted to another nexthop. 992 993config NETFILTER_XT_TARGET_TPROXY 994 tristate '"TPROXY" target transparent proxying support' 995 depends on NETFILTER_XTABLES 996 depends on NETFILTER_ADVANCED 997 depends on IPV6 || IPV6=n 998 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 999 depends on IP_NF_MANGLE 1000 select NF_DEFRAG_IPV4 1001 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n 1002 help 1003 This option adds a `TPROXY' target, which is somewhat similar to 1004 REDIRECT. It can only be used in the mangle table and is useful 1005 to redirect traffic to a transparent proxy. It does _not_ depend 1006 on Netfilter connection tracking and NAT, unlike REDIRECT. 1007 For it to work you will have to configure certain iptables rules 1008 and use policy routing. For more information on how to set it up 1009 see Documentation/networking/tproxy.txt. 1010 1011 To compile it as a module, choose M here. If unsure, say N. 1012 1013config NETFILTER_XT_TARGET_TRACE 1014 tristate '"TRACE" target support' 1015 depends on IP_NF_RAW || IP6_NF_RAW 1016 depends on NETFILTER_ADVANCED 1017 help 1018 The TRACE target allows you to mark packets so that the kernel 1019 will log every rule which match the packets as those traverse 1020 the tables, chains, rules. 1021 1022 If you want to compile it as a module, say M here and read 1023 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1024 1025config NETFILTER_XT_TARGET_SECMARK 1026 tristate '"SECMARK" target support' 1027 depends on NETWORK_SECMARK 1028 default m if NETFILTER_ADVANCED=n 1029 help 1030 The SECMARK target allows security marking of network 1031 packets, for use with security subsystems. 1032 1033 To compile it as a module, choose M here. If unsure, say N. 1034 1035config NETFILTER_XT_TARGET_TCPMSS 1036 tristate '"TCPMSS" target support' 1037 depends on IPV6 || IPV6=n 1038 default m if NETFILTER_ADVANCED=n 1039 ---help--- 1040 This option adds a `TCPMSS' target, which allows you to alter the 1041 MSS value of TCP SYN packets, to control the maximum size for that 1042 connection (usually limiting it to your outgoing interface's MTU 1043 minus 40). 1044 1045 This is used to overcome criminally braindead ISPs or servers which 1046 block ICMP Fragmentation Needed packets. The symptoms of this 1047 problem are that everything works fine from your Linux 1048 firewall/router, but machines behind it can never exchange large 1049 packets: 1050 1) Web browsers connect, then hang with no data received. 1051 2) Small mail works fine, but large emails hang. 1052 3) ssh works fine, but scp hangs after initial handshaking. 1053 1054 Workaround: activate this option and add a rule to your firewall 1055 configuration like: 1056 1057 iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \ 1058 -j TCPMSS --clamp-mss-to-pmtu 1059 1060 To compile it as a module, choose M here. If unsure, say N. 1061 1062config NETFILTER_XT_TARGET_TCPOPTSTRIP 1063 tristate '"TCPOPTSTRIP" target support' 1064 depends on IP_NF_MANGLE || IP6_NF_MANGLE 1065 depends on NETFILTER_ADVANCED 1066 help 1067 This option adds a "TCPOPTSTRIP" target, which allows you to strip 1068 TCP options from TCP packets. 1069 1070# alphabetically ordered list of matches 1071 1072comment "Xtables matches" 1073 1074config NETFILTER_XT_MATCH_ADDRTYPE 1075 tristate '"addrtype" address type match support' 1076 default m if NETFILTER_ADVANCED=n 1077 ---help--- 1078 This option allows you to match what routing thinks of an address, 1079 eg. UNICAST, LOCAL, BROADCAST, ... 1080 1081 If you want to compile it as a module, say M here and read 1082 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1083 1084config NETFILTER_XT_MATCH_BPF 1085 tristate '"bpf" match support' 1086 depends on NETFILTER_ADVANCED 1087 help 1088 BPF matching applies a linux socket filter to each packet and 1089 accepts those for which the filter returns non-zero. 1090 1091 To compile it as a module, choose M here. If unsure, say N. 1092 1093config NETFILTER_XT_MATCH_CGROUP 1094 tristate '"control group" match support' 1095 depends on NETFILTER_ADVANCED 1096 depends on CGROUPS 1097 select CGROUP_NET_CLASSID 1098 ---help--- 1099 Socket/process control group matching allows you to match locally 1100 generated packets based on which net_cls control group processes 1101 belong to. 1102 1103config NETFILTER_XT_MATCH_CLUSTER 1104 tristate '"cluster" match support' 1105 depends on NF_CONNTRACK 1106 depends on NETFILTER_ADVANCED 1107 ---help--- 1108 This option allows you to build work-load-sharing clusters of 1109 network servers/stateful firewalls without having a dedicated 1110 load-balancing router/server/switch. Basically, this match returns 1111 true when the packet must be handled by this cluster node. Thus, 1112 all nodes see all packets and this match decides which node handles 1113 what packets. The work-load sharing algorithm is based on source 1114 address hashing. 1115 1116 If you say Y or M here, try `iptables -m cluster --help` for 1117 more information. 1118 1119config NETFILTER_XT_MATCH_COMMENT 1120 tristate '"comment" match support' 1121 depends on NETFILTER_ADVANCED 1122 help 1123 This option adds a `comment' dummy-match, which allows you to put 1124 comments in your iptables ruleset. 1125 1126 If you want to compile it as a module, say M here and read 1127 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1128 1129config NETFILTER_XT_MATCH_CONNBYTES 1130 tristate '"connbytes" per-connection counter match support' 1131 depends on NF_CONNTRACK 1132 depends on NETFILTER_ADVANCED 1133 help 1134 This option adds a `connbytes' match, which allows you to match the 1135 number of bytes and/or packets for each direction within a connection. 1136 1137 If you want to compile it as a module, say M here and read 1138 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1139 1140config NETFILTER_XT_MATCH_CONNLABEL 1141 tristate '"connlabel" match support' 1142 select NF_CONNTRACK_LABELS 1143 depends on NF_CONNTRACK 1144 depends on NETFILTER_ADVANCED 1145 ---help--- 1146 This match allows you to test and assign userspace-defined labels names 1147 to a connection. The kernel only stores bit values - mapping 1148 names to bits is done by userspace. 1149 1150 Unlike connmark, more than 32 flag bits may be assigned to a 1151 connection simultaneously. 1152 1153config NETFILTER_XT_MATCH_CONNLIMIT 1154 tristate '"connlimit" match support' 1155 depends on NF_CONNTRACK 1156 depends on NETFILTER_ADVANCED 1157 select NETFILTER_CONNCOUNT 1158 ---help--- 1159 This match allows you to match against the number of parallel 1160 connections to a server per client IP address (or address block). 1161 1162config NETFILTER_XT_MATCH_CONNMARK 1163 tristate '"connmark" connection mark match support' 1164 depends on NF_CONNTRACK 1165 depends on NETFILTER_ADVANCED 1166 select NETFILTER_XT_CONNMARK 1167 ---help--- 1168 This is a backwards-compat option for the user's convenience 1169 (e.g. when running oldconfig). It selects 1170 CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). 1171 1172config NETFILTER_XT_MATCH_CONNTRACK 1173 tristate '"conntrack" connection tracking match support' 1174 depends on NF_CONNTRACK 1175 default m if NETFILTER_ADVANCED=n 1176 help 1177 This is a general conntrack match module, a superset of the state match. 1178 1179 It allows matching on additional conntrack information, which is 1180 useful in complex configurations, such as NAT gateways with multiple 1181 internet links or tunnels. 1182 1183 To compile it as a module, choose M here. If unsure, say N. 1184 1185config NETFILTER_XT_MATCH_CPU 1186 tristate '"cpu" match support' 1187 depends on NETFILTER_ADVANCED 1188 help 1189 CPU matching allows you to match packets based on the CPU 1190 currently handling the packet. 1191 1192 To compile it as a module, choose M here. If unsure, say N. 1193 1194config NETFILTER_XT_MATCH_DCCP 1195 tristate '"dccp" protocol match support' 1196 depends on NETFILTER_ADVANCED 1197 default IP_DCCP 1198 help 1199 With this option enabled, you will be able to use the iptables 1200 `dccp' match in order to match on DCCP source/destination ports 1201 and DCCP flags. 1202 1203 If you want to compile it as a module, say M here and read 1204 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1205 1206config NETFILTER_XT_MATCH_DEVGROUP 1207 tristate '"devgroup" match support' 1208 depends on NETFILTER_ADVANCED 1209 help 1210 This options adds a `devgroup' match, which allows to match on the 1211 device group a network device is assigned to. 1212 1213 To compile it as a module, choose M here. If unsure, say N. 1214 1215config NETFILTER_XT_MATCH_DSCP 1216 tristate '"dscp" and "tos" match support' 1217 depends on NETFILTER_ADVANCED 1218 help 1219 This option adds a `DSCP' match, which allows you to match against 1220 the IPv4/IPv6 header DSCP field (differentiated services codepoint). 1221 1222 The DSCP field can have any value between 0x0 and 0x3f inclusive. 1223 1224 It will also add a "tos" match, which allows you to match packets 1225 based on the Type Of Service fields of the IPv4 packet (which share 1226 the same bits as DSCP). 1227 1228 To compile it as a module, choose M here. If unsure, say N. 1229 1230config NETFILTER_XT_MATCH_ECN 1231 tristate '"ecn" match support' 1232 depends on NETFILTER_ADVANCED 1233 ---help--- 1234 This option adds an "ECN" match, which allows you to match against 1235 the IPv4 and TCP header ECN fields. 1236 1237 To compile it as a module, choose M here. If unsure, say N. 1238 1239config NETFILTER_XT_MATCH_ESP 1240 tristate '"esp" match support' 1241 depends on NETFILTER_ADVANCED 1242 help 1243 This match extension allows you to match a range of SPIs 1244 inside ESP header of IPSec packets. 1245 1246 To compile it as a module, choose M here. If unsure, say N. 1247 1248config NETFILTER_XT_MATCH_HASHLIMIT 1249 tristate '"hashlimit" match support' 1250 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 1251 depends on NETFILTER_ADVANCED 1252 help 1253 This option adds a `hashlimit' match. 1254 1255 As opposed to `limit', this match dynamically creates a hash table 1256 of limit buckets, based on your selection of source/destination 1257 addresses and/or ports. 1258 1259 It enables you to express policies like `10kpps for any given 1260 destination address' or `500pps from any given source address' 1261 with a single rule. 1262 1263config NETFILTER_XT_MATCH_HELPER 1264 tristate '"helper" match support' 1265 depends on NF_CONNTRACK 1266 depends on NETFILTER_ADVANCED 1267 help 1268 Helper matching allows you to match packets in dynamic connections 1269 tracked by a conntrack-helper, ie. ip_conntrack_ftp 1270 1271 To compile it as a module, choose M here. If unsure, say Y. 1272 1273config NETFILTER_XT_MATCH_HL 1274 tristate '"hl" hoplimit/TTL match support' 1275 depends on NETFILTER_ADVANCED 1276 ---help--- 1277 HL matching allows you to match packets based on the hoplimit 1278 in the IPv6 header, or the time-to-live field in the IPv4 1279 header of the packet. 1280 1281config NETFILTER_XT_MATCH_IPCOMP 1282 tristate '"ipcomp" match support' 1283 depends on NETFILTER_ADVANCED 1284 help 1285 This match extension allows you to match a range of CPIs(16 bits) 1286 inside IPComp header of IPSec packets. 1287 1288 To compile it as a module, choose M here. If unsure, say N. 1289 1290config NETFILTER_XT_MATCH_IPRANGE 1291 tristate '"iprange" address range match support' 1292 depends on NETFILTER_ADVANCED 1293 ---help--- 1294 This option adds a "iprange" match, which allows you to match based on 1295 an IP address range. (Normal iptables only matches on single addresses 1296 with an optional mask.) 1297 1298 If unsure, say M. 1299 1300config NETFILTER_XT_MATCH_IPVS 1301 tristate '"ipvs" match support' 1302 depends on IP_VS 1303 depends on NETFILTER_ADVANCED 1304 depends on NF_CONNTRACK 1305 help 1306 This option allows you to match against IPVS properties of a packet. 1307 1308 If unsure, say N. 1309 1310config NETFILTER_XT_MATCH_L2TP 1311 tristate '"l2tp" match support' 1312 depends on NETFILTER_ADVANCED 1313 default L2TP 1314 ---help--- 1315 This option adds an "L2TP" match, which allows you to match against 1316 L2TP protocol header fields. 1317 1318 To compile it as a module, choose M here. If unsure, say N. 1319 1320config NETFILTER_XT_MATCH_LENGTH 1321 tristate '"length" match support' 1322 depends on NETFILTER_ADVANCED 1323 help 1324 This option allows you to match the length of a packet against a 1325 specific value or range of values. 1326 1327 To compile it as a module, choose M here. If unsure, say N. 1328 1329config NETFILTER_XT_MATCH_LIMIT 1330 tristate '"limit" match support' 1331 depends on NETFILTER_ADVANCED 1332 help 1333 limit matching allows you to control the rate at which a rule can be 1334 matched: mainly useful in combination with the LOG target ("LOG 1335 target support", below) and to avoid some Denial of Service attacks. 1336 1337 To compile it as a module, choose M here. If unsure, say N. 1338 1339config NETFILTER_XT_MATCH_MAC 1340 tristate '"mac" address match support' 1341 depends on NETFILTER_ADVANCED 1342 help 1343 MAC matching allows you to match packets based on the source 1344 Ethernet address of the packet. 1345 1346 To compile it as a module, choose M here. If unsure, say N. 1347 1348config NETFILTER_XT_MATCH_MARK 1349 tristate '"mark" match support' 1350 depends on NETFILTER_ADVANCED 1351 select NETFILTER_XT_MARK 1352 ---help--- 1353 This is a backwards-compat option for the user's convenience 1354 (e.g. when running oldconfig). It selects 1355 CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). 1356 1357config NETFILTER_XT_MATCH_MULTIPORT 1358 tristate '"multiport" Multiple port match support' 1359 depends on NETFILTER_ADVANCED 1360 help 1361 Multiport matching allows you to match TCP or UDP packets based on 1362 a series of source or destination ports: normally a rule can only 1363 match a single range of ports. 1364 1365 To compile it as a module, choose M here. If unsure, say N. 1366 1367config NETFILTER_XT_MATCH_NFACCT 1368 tristate '"nfacct" match support' 1369 depends on NETFILTER_ADVANCED 1370 select NETFILTER_NETLINK_ACCT 1371 help 1372 This option allows you to use the extended accounting through 1373 nfnetlink_acct. 1374 1375 To compile it as a module, choose M here. If unsure, say N. 1376 1377config NETFILTER_XT_MATCH_OSF 1378 tristate '"osf" Passive OS fingerprint match' 1379 depends on NETFILTER_ADVANCED && NETFILTER_NETLINK 1380 help 1381 This option selects the Passive OS Fingerprinting match module 1382 that allows to passively match the remote operating system by 1383 analyzing incoming TCP SYN packets. 1384 1385 Rules and loading software can be downloaded from 1386 http://www.ioremap.net/projects/osf 1387 1388 To compile it as a module, choose M here. If unsure, say N. 1389 1390config NETFILTER_XT_MATCH_OWNER 1391 tristate '"owner" match support' 1392 depends on NETFILTER_ADVANCED 1393 ---help--- 1394 Socket owner matching allows you to match locally-generated packets 1395 based on who created the socket: the user or group. It is also 1396 possible to check whether a socket actually exists. 1397 1398config NETFILTER_XT_MATCH_POLICY 1399 tristate 'IPsec "policy" match support' 1400 depends on XFRM 1401 default m if NETFILTER_ADVANCED=n 1402 help 1403 Policy matching allows you to match packets based on the 1404 IPsec policy that was used during decapsulation/will 1405 be used during encapsulation. 1406 1407 To compile it as a module, choose M here. If unsure, say N. 1408 1409config NETFILTER_XT_MATCH_PHYSDEV 1410 tristate '"physdev" match support' 1411 depends on BRIDGE && BRIDGE_NETFILTER 1412 depends on NETFILTER_ADVANCED 1413 help 1414 Physdev packet matching matches against the physical bridge ports 1415 the IP packet arrived on or will leave by. 1416 1417 To compile it as a module, choose M here. If unsure, say N. 1418 1419config NETFILTER_XT_MATCH_PKTTYPE 1420 tristate '"pkttype" packet type match support' 1421 depends on NETFILTER_ADVANCED 1422 help 1423 Packet type matching allows you to match a packet by 1424 its "class", eg. BROADCAST, MULTICAST, ... 1425 1426 Typical usage: 1427 iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG 1428 1429 To compile it as a module, choose M here. If unsure, say N. 1430 1431config NETFILTER_XT_MATCH_QUOTA 1432 tristate '"quota" match support' 1433 depends on NETFILTER_ADVANCED 1434 help 1435 This option adds a `quota' match, which allows to match on a 1436 byte counter. 1437 1438 If you want to compile it as a module, say M here and read 1439 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1440 1441config NETFILTER_XT_MATCH_RATEEST 1442 tristate '"rateest" match support' 1443 depends on NETFILTER_ADVANCED 1444 select NETFILTER_XT_TARGET_RATEEST 1445 help 1446 This option adds a `rateest' match, which allows to match on the 1447 rate estimated by the RATEEST target. 1448 1449 To compile it as a module, choose M here. If unsure, say N. 1450 1451config NETFILTER_XT_MATCH_REALM 1452 tristate '"realm" match support' 1453 depends on NETFILTER_ADVANCED 1454 select IP_ROUTE_CLASSID 1455 help 1456 This option adds a `realm' match, which allows you to use the realm 1457 key from the routing subsystem inside iptables. 1458 1459 This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option 1460 in tc world. 1461 1462 If you want to compile it as a module, say M here and read 1463 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1464 1465config NETFILTER_XT_MATCH_RECENT 1466 tristate '"recent" match support' 1467 depends on NETFILTER_ADVANCED 1468 ---help--- 1469 This match is used for creating one or many lists of recently 1470 used addresses and then matching against that/those list(s). 1471 1472 Short options are available by using 'iptables -m recent -h' 1473 Official Website: <http://snowman.net/projects/ipt_recent/> 1474 1475config NETFILTER_XT_MATCH_SCTP 1476 tristate '"sctp" protocol match support' 1477 depends on NETFILTER_ADVANCED 1478 default IP_SCTP 1479 help 1480 With this option enabled, you will be able to use the 1481 `sctp' match in order to match on SCTP source/destination ports 1482 and SCTP chunk types. 1483 1484 If you want to compile it as a module, say M here and read 1485 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1486 1487config NETFILTER_XT_MATCH_SOCKET 1488 tristate '"socket" match support' 1489 depends on NETFILTER_XTABLES 1490 depends on NETFILTER_ADVANCED 1491 depends on IPV6 || IPV6=n 1492 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 1493 depends on NF_SOCKET_IPV4 1494 depends on NF_SOCKET_IPV6 1495 select NF_DEFRAG_IPV4 1496 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n 1497 help 1498 This option adds a `socket' match, which can be used to match 1499 packets for which a TCP or UDP socket lookup finds a valid socket. 1500 It can be used in combination with the MARK target and policy 1501 routing to implement full featured non-locally bound sockets. 1502 1503 To compile it as a module, choose M here. If unsure, say N. 1504 1505config NETFILTER_XT_MATCH_STATE 1506 tristate '"state" match support' 1507 depends on NF_CONNTRACK 1508 default m if NETFILTER_ADVANCED=n 1509 help 1510 Connection state matching allows you to match packets based on their 1511 relationship to a tracked connection (ie. previous packets). This 1512 is a powerful tool for packet classification. 1513 1514 To compile it as a module, choose M here. If unsure, say N. 1515 1516config NETFILTER_XT_MATCH_STATISTIC 1517 tristate '"statistic" match support' 1518 depends on NETFILTER_ADVANCED 1519 help 1520 This option adds a `statistic' match, which allows you to match 1521 on packets periodically or randomly with a given percentage. 1522 1523 To compile it as a module, choose M here. If unsure, say N. 1524 1525config NETFILTER_XT_MATCH_STRING 1526 tristate '"string" match support' 1527 depends on NETFILTER_ADVANCED 1528 select TEXTSEARCH 1529 select TEXTSEARCH_KMP 1530 select TEXTSEARCH_BM 1531 select TEXTSEARCH_FSM 1532 help 1533 This option adds a `string' match, which allows you to look for 1534 pattern matchings in packets. 1535 1536 To compile it as a module, choose M here. If unsure, say N. 1537 1538config NETFILTER_XT_MATCH_TCPMSS 1539 tristate '"tcpmss" match support' 1540 depends on NETFILTER_ADVANCED 1541 help 1542 This option adds a `tcpmss' match, which allows you to examine the 1543 MSS value of TCP SYN packets, which control the maximum packet size 1544 for that connection. 1545 1546 To compile it as a module, choose M here. If unsure, say N. 1547 1548config NETFILTER_XT_MATCH_TIME 1549 tristate '"time" match support' 1550 depends on NETFILTER_ADVANCED 1551 ---help--- 1552 This option adds a "time" match, which allows you to match based on 1553 the packet arrival time (at the machine which netfilter is running) 1554 on) or departure time/date (for locally generated packets). 1555 1556 If you say Y here, try `iptables -m time --help` for 1557 more information. 1558 1559 If you want to compile it as a module, say M here. 1560 If unsure, say N. 1561 1562config NETFILTER_XT_MATCH_U32 1563 tristate '"u32" match support' 1564 depends on NETFILTER_ADVANCED 1565 ---help--- 1566 u32 allows you to extract quantities of up to 4 bytes from a packet, 1567 AND them with specified masks, shift them by specified amounts and 1568 test whether the results are in any of a set of specified ranges. 1569 The specification of what to extract is general enough to skip over 1570 headers with lengths stored in the packet, as in IP or TCP header 1571 lengths. 1572 1573 Details and examples are in the kernel module source. 1574 1575endif # NETFILTER_XTABLES 1576 1577endmenu 1578 1579source "net/netfilter/ipset/Kconfig" 1580 1581source "net/netfilter/ipvs/Kconfig" 1582