xref: /openbmc/linux/net/mac80211/tx.c (revision 8fa5723aa7e053d498336b48448b292fc2e0458b)
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
5  * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  *
12  * Transmit and frame generation functions.
13  */
14 
15 #include <linux/kernel.h>
16 #include <linux/slab.h>
17 #include <linux/skbuff.h>
18 #include <linux/etherdevice.h>
19 #include <linux/bitmap.h>
20 #include <linux/rcupdate.h>
21 #include <net/net_namespace.h>
22 #include <net/ieee80211_radiotap.h>
23 #include <net/cfg80211.h>
24 #include <net/mac80211.h>
25 #include <asm/unaligned.h>
26 
27 #include "ieee80211_i.h"
28 #include "led.h"
29 #include "mesh.h"
30 #include "wep.h"
31 #include "wpa.h"
32 #include "wme.h"
33 #include "rate.h"
34 
35 #define IEEE80211_TX_OK		0
36 #define IEEE80211_TX_AGAIN	1
37 #define IEEE80211_TX_FRAG_AGAIN	2
38 
39 /* misc utils */
40 
41 static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr,
42 				 int next_frag_len)
43 {
44 	int rate, mrate, erp, dur, i;
45 	struct ieee80211_rate *txrate;
46 	struct ieee80211_local *local = tx->local;
47 	struct ieee80211_supported_band *sband;
48 	struct ieee80211_hdr *hdr;
49 
50 	sband = local->hw.wiphy->bands[tx->channel->band];
51 	txrate = &sband->bitrates[tx->rate_idx];
52 
53 	erp = 0;
54 	if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
55 		erp = txrate->flags & IEEE80211_RATE_ERP_G;
56 
57 	/*
58 	 * data and mgmt (except PS Poll):
59 	 * - during CFP: 32768
60 	 * - during contention period:
61 	 *   if addr1 is group address: 0
62 	 *   if more fragments = 0 and addr1 is individual address: time to
63 	 *      transmit one ACK plus SIFS
64 	 *   if more fragments = 1 and addr1 is individual address: time to
65 	 *      transmit next fragment plus 2 x ACK plus 3 x SIFS
66 	 *
67 	 * IEEE 802.11, 9.6:
68 	 * - control response frame (CTS or ACK) shall be transmitted using the
69 	 *   same rate as the immediately previous frame in the frame exchange
70 	 *   sequence, if this rate belongs to the PHY mandatory rates, or else
71 	 *   at the highest possible rate belonging to the PHY rates in the
72 	 *   BSSBasicRateSet
73 	 */
74 	hdr = (struct ieee80211_hdr *)tx->skb->data;
75 	if (ieee80211_is_ctl(hdr->frame_control)) {
76 		/* TODO: These control frames are not currently sent by
77 		 * mac80211, but should they be implemented, this function
78 		 * needs to be updated to support duration field calculation.
79 		 *
80 		 * RTS: time needed to transmit pending data/mgmt frame plus
81 		 *    one CTS frame plus one ACK frame plus 3 x SIFS
82 		 * CTS: duration of immediately previous RTS minus time
83 		 *    required to transmit CTS and its SIFS
84 		 * ACK: 0 if immediately previous directed data/mgmt had
85 		 *    more=0, with more=1 duration in ACK frame is duration
86 		 *    from previous frame minus time needed to transmit ACK
87 		 *    and its SIFS
88 		 * PS Poll: BIT(15) | BIT(14) | aid
89 		 */
90 		return 0;
91 	}
92 
93 	/* data/mgmt */
94 	if (0 /* FIX: data/mgmt during CFP */)
95 		return cpu_to_le16(32768);
96 
97 	if (group_addr) /* Group address as the destination - no ACK */
98 		return 0;
99 
100 	/* Individual destination address:
101 	 * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes)
102 	 * CTS and ACK frames shall be transmitted using the highest rate in
103 	 * basic rate set that is less than or equal to the rate of the
104 	 * immediately previous frame and that is using the same modulation
105 	 * (CCK or OFDM). If no basic rate set matches with these requirements,
106 	 * the highest mandatory rate of the PHY that is less than or equal to
107 	 * the rate of the previous frame is used.
108 	 * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps
109 	 */
110 	rate = -1;
111 	/* use lowest available if everything fails */
112 	mrate = sband->bitrates[0].bitrate;
113 	for (i = 0; i < sband->n_bitrates; i++) {
114 		struct ieee80211_rate *r = &sband->bitrates[i];
115 
116 		if (r->bitrate > txrate->bitrate)
117 			break;
118 
119 		if (tx->sdata->bss_conf.basic_rates & BIT(i))
120 			rate = r->bitrate;
121 
122 		switch (sband->band) {
123 		case IEEE80211_BAND_2GHZ: {
124 			u32 flag;
125 			if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
126 				flag = IEEE80211_RATE_MANDATORY_G;
127 			else
128 				flag = IEEE80211_RATE_MANDATORY_B;
129 			if (r->flags & flag)
130 				mrate = r->bitrate;
131 			break;
132 		}
133 		case IEEE80211_BAND_5GHZ:
134 			if (r->flags & IEEE80211_RATE_MANDATORY_A)
135 				mrate = r->bitrate;
136 			break;
137 		case IEEE80211_NUM_BANDS:
138 			WARN_ON(1);
139 			break;
140 		}
141 	}
142 	if (rate == -1) {
143 		/* No matching basic rate found; use highest suitable mandatory
144 		 * PHY rate */
145 		rate = mrate;
146 	}
147 
148 	/* Time needed to transmit ACK
149 	 * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up
150 	 * to closest integer */
151 
152 	dur = ieee80211_frame_duration(local, 10, rate, erp,
153 				tx->sdata->bss_conf.use_short_preamble);
154 
155 	if (next_frag_len) {
156 		/* Frame is fragmented: duration increases with time needed to
157 		 * transmit next fragment plus ACK and 2 x SIFS. */
158 		dur *= 2; /* ACK + SIFS */
159 		/* next fragment */
160 		dur += ieee80211_frame_duration(local, next_frag_len,
161 				txrate->bitrate, erp,
162 				tx->sdata->bss_conf.use_short_preamble);
163 	}
164 
165 	return cpu_to_le16(dur);
166 }
167 
168 static int inline is_ieee80211_device(struct ieee80211_local *local,
169 				      struct net_device *dev)
170 {
171 	return local == wdev_priv(dev->ieee80211_ptr);
172 }
173 
174 /* tx handlers */
175 
176 static ieee80211_tx_result debug_noinline
177 ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
178 {
179 
180 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
181 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
182 	u32 sta_flags;
183 
184 	if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED))
185 		return TX_CONTINUE;
186 
187 	if (unlikely(tx->local->sw_scanning) &&
188 	    !ieee80211_is_probe_req(hdr->frame_control))
189 		return TX_DROP;
190 
191 	if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
192 		return TX_CONTINUE;
193 
194 	if (tx->flags & IEEE80211_TX_PS_BUFFERED)
195 		return TX_CONTINUE;
196 
197 	sta_flags = tx->sta ? get_sta_flags(tx->sta) : 0;
198 
199 	if (likely(tx->flags & IEEE80211_TX_UNICAST)) {
200 		if (unlikely(!(sta_flags & WLAN_STA_ASSOC) &&
201 			     tx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
202 			     ieee80211_is_data(hdr->frame_control))) {
203 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
204 			DECLARE_MAC_BUF(mac);
205 			printk(KERN_DEBUG "%s: dropped data frame to not "
206 			       "associated station %s\n",
207 			       tx->dev->name, print_mac(mac, hdr->addr1));
208 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
209 			I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc);
210 			return TX_DROP;
211 		}
212 	} else {
213 		if (unlikely(ieee80211_is_data(hdr->frame_control) &&
214 			     tx->local->num_sta == 0 &&
215 			     tx->sdata->vif.type != NL80211_IFTYPE_ADHOC)) {
216 			/*
217 			 * No associated STAs - no need to send multicast
218 			 * frames.
219 			 */
220 			return TX_DROP;
221 		}
222 		return TX_CONTINUE;
223 	}
224 
225 	return TX_CONTINUE;
226 }
227 
228 /* This function is called whenever the AP is about to exceed the maximum limit
229  * of buffered frames for power saving STAs. This situation should not really
230  * happen often during normal operation, so dropping the oldest buffered packet
231  * from each queue should be OK to make some room for new frames. */
232 static void purge_old_ps_buffers(struct ieee80211_local *local)
233 {
234 	int total = 0, purged = 0;
235 	struct sk_buff *skb;
236 	struct ieee80211_sub_if_data *sdata;
237 	struct sta_info *sta;
238 
239 	/*
240 	 * virtual interfaces are protected by RCU
241 	 */
242 	rcu_read_lock();
243 
244 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
245 		struct ieee80211_if_ap *ap;
246 		if (sdata->vif.type != NL80211_IFTYPE_AP)
247 			continue;
248 		ap = &sdata->u.ap;
249 		skb = skb_dequeue(&ap->ps_bc_buf);
250 		if (skb) {
251 			purged++;
252 			dev_kfree_skb(skb);
253 		}
254 		total += skb_queue_len(&ap->ps_bc_buf);
255 	}
256 
257 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
258 		skb = skb_dequeue(&sta->ps_tx_buf);
259 		if (skb) {
260 			purged++;
261 			dev_kfree_skb(skb);
262 		}
263 		total += skb_queue_len(&sta->ps_tx_buf);
264 	}
265 
266 	rcu_read_unlock();
267 
268 	local->total_ps_buffered = total;
269 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
270 	printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
271 	       wiphy_name(local->hw.wiphy), purged);
272 #endif
273 }
274 
275 static ieee80211_tx_result
276 ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
277 {
278 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
279 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
280 
281 	/*
282 	 * broadcast/multicast frame
283 	 *
284 	 * If any of the associated stations is in power save mode,
285 	 * the frame is buffered to be sent after DTIM beacon frame.
286 	 * This is done either by the hardware or us.
287 	 */
288 
289 	/* powersaving STAs only in AP/VLAN mode */
290 	if (!tx->sdata->bss)
291 		return TX_CONTINUE;
292 
293 	/* no buffering for ordered frames */
294 	if (ieee80211_has_order(hdr->frame_control))
295 		return TX_CONTINUE;
296 
297 	/* no stations in PS mode */
298 	if (!atomic_read(&tx->sdata->bss->num_sta_ps))
299 		return TX_CONTINUE;
300 
301 	/* buffered in mac80211 */
302 	if (tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) {
303 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
304 			purge_old_ps_buffers(tx->local);
305 		if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
306 		    AP_MAX_BC_BUFFER) {
307 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
308 			if (net_ratelimit()) {
309 				printk(KERN_DEBUG "%s: BC TX buffer full - "
310 				       "dropping the oldest frame\n",
311 				       tx->dev->name);
312 			}
313 #endif
314 			dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf));
315 		} else
316 			tx->local->total_ps_buffered++;
317 		skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb);
318 		return TX_QUEUED;
319 	}
320 
321 	/* buffered in hardware */
322 	info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
323 
324 	return TX_CONTINUE;
325 }
326 
327 static ieee80211_tx_result
328 ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
329 {
330 	struct sta_info *sta = tx->sta;
331 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
332 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
333 	u32 staflags;
334 	DECLARE_MAC_BUF(mac);
335 
336 	if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)))
337 		return TX_CONTINUE;
338 
339 	staflags = get_sta_flags(sta);
340 
341 	if (unlikely((staflags & WLAN_STA_PS) &&
342 		     !(staflags & WLAN_STA_PSPOLL))) {
343 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
344 		printk(KERN_DEBUG "STA %s aid %d: PS buffer (entries "
345 		       "before %d)\n",
346 		       print_mac(mac, sta->sta.addr), sta->sta.aid,
347 		       skb_queue_len(&sta->ps_tx_buf));
348 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
349 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
350 			purge_old_ps_buffers(tx->local);
351 		if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
352 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
353 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
354 			if (net_ratelimit()) {
355 				printk(KERN_DEBUG "%s: STA %s TX "
356 				       "buffer full - dropping oldest frame\n",
357 				       tx->dev->name, print_mac(mac, sta->sta.addr));
358 			}
359 #endif
360 			dev_kfree_skb(old);
361 		} else
362 			tx->local->total_ps_buffered++;
363 
364 		/* Queue frame to be sent after STA sends an PS Poll frame */
365 		if (skb_queue_empty(&sta->ps_tx_buf))
366 			sta_info_set_tim_bit(sta);
367 
368 		info->control.jiffies = jiffies;
369 		skb_queue_tail(&sta->ps_tx_buf, tx->skb);
370 		return TX_QUEUED;
371 	}
372 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
373 	else if (unlikely(test_sta_flags(sta, WLAN_STA_PS))) {
374 		printk(KERN_DEBUG "%s: STA %s in PS mode, but pspoll "
375 		       "set -> send frame\n", tx->dev->name,
376 		       print_mac(mac, sta->sta.addr));
377 	}
378 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
379 	clear_sta_flags(sta, WLAN_STA_PSPOLL);
380 
381 	return TX_CONTINUE;
382 }
383 
384 static ieee80211_tx_result debug_noinline
385 ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx)
386 {
387 	if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED))
388 		return TX_CONTINUE;
389 
390 	if (tx->flags & IEEE80211_TX_UNICAST)
391 		return ieee80211_tx_h_unicast_ps_buf(tx);
392 	else
393 		return ieee80211_tx_h_multicast_ps_buf(tx);
394 }
395 
396 static ieee80211_tx_result debug_noinline
397 ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
398 {
399 	struct ieee80211_key *key;
400 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
401 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
402 
403 	if (unlikely(tx->skb->do_not_encrypt))
404 		tx->key = NULL;
405 	else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
406 		tx->key = key;
407 	else if ((key = rcu_dereference(tx->sdata->default_key)))
408 		tx->key = key;
409 	else if (tx->sdata->drop_unencrypted &&
410 		 (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
411 		 !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
412 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
413 		return TX_DROP;
414 	} else
415 		tx->key = NULL;
416 
417 	if (tx->key) {
418 		tx->key->tx_rx_count++;
419 		/* TODO: add threshold stuff again */
420 
421 		switch (tx->key->conf.alg) {
422 		case ALG_WEP:
423 			if (ieee80211_is_auth(hdr->frame_control))
424 				break;
425 		case ALG_TKIP:
426 		case ALG_CCMP:
427 			if (!ieee80211_is_data_present(hdr->frame_control))
428 				tx->key = NULL;
429 			break;
430 		}
431 	}
432 
433 	if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
434 		tx->skb->do_not_encrypt = 1;
435 
436 	return TX_CONTINUE;
437 }
438 
439 static ieee80211_tx_result debug_noinline
440 ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
441 {
442 	struct rate_selection rsel;
443 	struct ieee80211_supported_band *sband;
444 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
445 
446 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
447 
448 	if (likely(tx->rate_idx < 0)) {
449 		rate_control_get_rate(tx->sdata, sband, tx->sta,
450 				      tx->skb, &rsel);
451 		if (tx->sta)
452 			tx->sta->last_txrate_idx = rsel.rate_idx;
453 		tx->rate_idx = rsel.rate_idx;
454 		if (unlikely(rsel.probe_idx >= 0)) {
455 			info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
456 			tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
457 			info->control.retries[0].rate_idx = tx->rate_idx;
458 			info->control.retries[0].limit = tx->local->hw.max_altrate_tries;
459 			tx->rate_idx = rsel.probe_idx;
460 		} else if (info->control.retries[0].limit == 0)
461 			info->control.retries[0].rate_idx = -1;
462 
463 		if (unlikely(tx->rate_idx < 0))
464 			return TX_DROP;
465 	} else
466 		info->control.retries[0].rate_idx = -1;
467 
468 	if (tx->sdata->bss_conf.use_cts_prot &&
469 	    (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) {
470 		tx->last_frag_rate_idx = tx->rate_idx;
471 		if (rsel.probe_idx >= 0)
472 			tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG;
473 		else
474 			tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
475 		tx->rate_idx = rsel.nonerp_idx;
476 		info->tx_rate_idx = rsel.nonerp_idx;
477 		info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
478 	} else {
479 		tx->last_frag_rate_idx = tx->rate_idx;
480 		info->tx_rate_idx = tx->rate_idx;
481 	}
482 	info->tx_rate_idx = tx->rate_idx;
483 
484 	return TX_CONTINUE;
485 }
486 
487 static ieee80211_tx_result debug_noinline
488 ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
489 {
490 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
491 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
492 	struct ieee80211_supported_band *sband;
493 
494 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
495 
496 	if (tx->sta)
497 		info->control.sta = &tx->sta->sta;
498 
499 	if (!info->control.retry_limit) {
500 		if (!is_multicast_ether_addr(hdr->addr1)) {
501 			int len = min_t(int, tx->skb->len + FCS_LEN,
502 					tx->local->fragmentation_threshold);
503 			if (len > tx->local->rts_threshold
504 			    && tx->local->rts_threshold <
505 						IEEE80211_MAX_RTS_THRESHOLD) {
506 				info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS;
507 				info->flags |=
508 					IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
509 				info->control.retry_limit =
510 					tx->local->long_retry_limit;
511 			} else {
512 				info->control.retry_limit =
513 					tx->local->short_retry_limit;
514 			}
515 		} else {
516 			info->control.retry_limit = 1;
517 		}
518 	}
519 
520 	if (tx->flags & IEEE80211_TX_FRAGMENTED) {
521 		/* Do not use multiple retry rates when sending fragmented
522 		 * frames.
523 		 * TODO: The last fragment could still use multiple retry
524 		 * rates. */
525 		info->control.retries[0].rate_idx = -1;
526 	}
527 
528 	/* Use CTS protection for unicast frames sent using extended rates if
529 	 * there are associated non-ERP stations and RTS/CTS is not configured
530 	 * for the frame. */
531 	if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) &&
532 	    (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) &&
533 	    (tx->flags & IEEE80211_TX_UNICAST) &&
534 	    tx->sdata->bss_conf.use_cts_prot &&
535 	    !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS))
536 		info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT;
537 
538 	/* Transmit data frames using short preambles if the driver supports
539 	 * short preambles at the selected rate and short preambles are
540 	 * available on the network at the current point in time. */
541 	if (ieee80211_is_data(hdr->frame_control) &&
542 	    (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
543 	    tx->sdata->bss_conf.use_short_preamble &&
544 	    (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) {
545 		info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
546 	}
547 
548 	if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
549 	    (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
550 		struct ieee80211_rate *rate;
551 		s8 baserate = -1;
552 		int idx;
553 
554 		/* Do not use multiple retry rates when using RTS/CTS */
555 		info->control.retries[0].rate_idx = -1;
556 
557 		/* Use min(data rate, max base rate) as CTS/RTS rate */
558 		rate = &sband->bitrates[tx->rate_idx];
559 
560 		for (idx = 0; idx < sband->n_bitrates; idx++) {
561 			if (sband->bitrates[idx].bitrate > rate->bitrate)
562 				continue;
563 			if (tx->sdata->bss_conf.basic_rates & BIT(idx) &&
564 			    (baserate < 0 ||
565 			     (sband->bitrates[baserate].bitrate
566 			      < sband->bitrates[idx].bitrate)))
567 				baserate = idx;
568 		}
569 
570 		if (baserate >= 0)
571 			info->control.rts_cts_rate_idx = baserate;
572 		else
573 			info->control.rts_cts_rate_idx = 0;
574 	}
575 
576 	if (tx->sta)
577 		info->control.sta = &tx->sta->sta;
578 
579 	return TX_CONTINUE;
580 }
581 
582 static ieee80211_tx_result debug_noinline
583 ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
584 {
585 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
586 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
587 	u16 *seq;
588 	u8 *qc;
589 	int tid;
590 
591 	/*
592 	 * Packet injection may want to control the sequence
593 	 * number, if we have no matching interface then we
594 	 * neither assign one ourselves nor ask the driver to.
595 	 */
596 	if (unlikely(!info->control.vif))
597 		return TX_CONTINUE;
598 
599 	if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
600 		return TX_CONTINUE;
601 
602 	if (ieee80211_hdrlen(hdr->frame_control) < 24)
603 		return TX_CONTINUE;
604 
605 	if (!ieee80211_is_data_qos(hdr->frame_control)) {
606 		info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
607 		return TX_CONTINUE;
608 	}
609 
610 	/*
611 	 * This should be true for injected/management frames only, for
612 	 * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
613 	 * above since they are not QoS-data frames.
614 	 */
615 	if (!tx->sta)
616 		return TX_CONTINUE;
617 
618 	/* include per-STA, per-TID sequence counter */
619 
620 	qc = ieee80211_get_qos_ctl(hdr);
621 	tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
622 	seq = &tx->sta->tid_seq[tid];
623 
624 	hdr->seq_ctrl = cpu_to_le16(*seq);
625 
626 	/* Increase the sequence number. */
627 	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
628 
629 	return TX_CONTINUE;
630 }
631 
632 static ieee80211_tx_result debug_noinline
633 ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
634 {
635 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
636 	size_t hdrlen, per_fragm, num_fragm, payload_len, left;
637 	struct sk_buff **frags, *first, *frag;
638 	int i;
639 	u16 seq;
640 	u8 *pos;
641 	int frag_threshold = tx->local->fragmentation_threshold;
642 
643 	if (!(tx->flags & IEEE80211_TX_FRAGMENTED))
644 		return TX_CONTINUE;
645 
646 	/*
647 	 * Warn when submitting a fragmented A-MPDU frame and drop it.
648 	 * This scenario is handled in __ieee80211_tx_prepare but extra
649 	 * caution taken here as fragmented ampdu may cause Tx stop.
650 	 */
651 	if (WARN_ON(tx->flags & IEEE80211_TX_CTL_AMPDU ||
652 		    skb_get_queue_mapping(tx->skb) >=
653 			ieee80211_num_regular_queues(&tx->local->hw)))
654 		return TX_DROP;
655 
656 	first = tx->skb;
657 
658 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
659 	payload_len = first->len - hdrlen;
660 	per_fragm = frag_threshold - hdrlen - FCS_LEN;
661 	num_fragm = DIV_ROUND_UP(payload_len, per_fragm);
662 
663 	frags = kzalloc(num_fragm * sizeof(struct sk_buff *), GFP_ATOMIC);
664 	if (!frags)
665 		goto fail;
666 
667 	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS);
668 	seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ;
669 	pos = first->data + hdrlen + per_fragm;
670 	left = payload_len - per_fragm;
671 	for (i = 0; i < num_fragm - 1; i++) {
672 		struct ieee80211_hdr *fhdr;
673 		size_t copylen;
674 
675 		if (left <= 0)
676 			goto fail;
677 
678 		/* reserve enough extra head and tail room for possible
679 		 * encryption */
680 		frag = frags[i] =
681 			dev_alloc_skb(tx->local->tx_headroom +
682 				      frag_threshold +
683 				      IEEE80211_ENCRYPT_HEADROOM +
684 				      IEEE80211_ENCRYPT_TAILROOM);
685 		if (!frag)
686 			goto fail;
687 		/* Make sure that all fragments use the same priority so
688 		 * that they end up using the same TX queue */
689 		frag->priority = first->priority;
690 		skb_reserve(frag, tx->local->tx_headroom +
691 				  IEEE80211_ENCRYPT_HEADROOM);
692 		fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen);
693 		memcpy(fhdr, first->data, hdrlen);
694 		if (i == num_fragm - 2)
695 			fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
696 		fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG));
697 		copylen = left > per_fragm ? per_fragm : left;
698 		memcpy(skb_put(frag, copylen), pos, copylen);
699 		memcpy(frag->cb, first->cb, sizeof(frag->cb));
700 		skb_copy_queue_mapping(frag, first);
701 		frag->do_not_encrypt = first->do_not_encrypt;
702 
703 		pos += copylen;
704 		left -= copylen;
705 	}
706 	skb_trim(first, hdrlen + per_fragm);
707 
708 	tx->num_extra_frag = num_fragm - 1;
709 	tx->extra_frag = frags;
710 
711 	return TX_CONTINUE;
712 
713  fail:
714 	if (frags) {
715 		for (i = 0; i < num_fragm - 1; i++)
716 			if (frags[i])
717 				dev_kfree_skb(frags[i]);
718 		kfree(frags);
719 	}
720 	I802_DEBUG_INC(tx->local->tx_handlers_drop_fragment);
721 	return TX_DROP;
722 }
723 
724 static ieee80211_tx_result debug_noinline
725 ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx)
726 {
727 	if (!tx->key)
728 		return TX_CONTINUE;
729 
730 	switch (tx->key->conf.alg) {
731 	case ALG_WEP:
732 		return ieee80211_crypto_wep_encrypt(tx);
733 	case ALG_TKIP:
734 		return ieee80211_crypto_tkip_encrypt(tx);
735 	case ALG_CCMP:
736 		return ieee80211_crypto_ccmp_encrypt(tx);
737 	}
738 
739 	/* not reached */
740 	WARN_ON(1);
741 	return TX_DROP;
742 }
743 
744 static ieee80211_tx_result debug_noinline
745 ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx)
746 {
747 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
748 	int next_len, i;
749 	int group_addr = is_multicast_ether_addr(hdr->addr1);
750 
751 	if (!(tx->flags & IEEE80211_TX_FRAGMENTED)) {
752 		hdr->duration_id = ieee80211_duration(tx, group_addr, 0);
753 		return TX_CONTINUE;
754 	}
755 
756 	hdr->duration_id = ieee80211_duration(tx, group_addr,
757 					      tx->extra_frag[0]->len);
758 
759 	for (i = 0; i < tx->num_extra_frag; i++) {
760 		if (i + 1 < tx->num_extra_frag) {
761 			next_len = tx->extra_frag[i + 1]->len;
762 		} else {
763 			next_len = 0;
764 			tx->rate_idx = tx->last_frag_rate_idx;
765 		}
766 
767 		hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data;
768 		hdr->duration_id = ieee80211_duration(tx, 0, next_len);
769 	}
770 
771 	return TX_CONTINUE;
772 }
773 
774 static ieee80211_tx_result debug_noinline
775 ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
776 {
777 	int i;
778 
779 	if (!tx->sta)
780 		return TX_CONTINUE;
781 
782 	tx->sta->tx_packets++;
783 	tx->sta->tx_fragments++;
784 	tx->sta->tx_bytes += tx->skb->len;
785 	if (tx->extra_frag) {
786 		tx->sta->tx_fragments += tx->num_extra_frag;
787 		for (i = 0; i < tx->num_extra_frag; i++)
788 			tx->sta->tx_bytes += tx->extra_frag[i]->len;
789 	}
790 
791 	return TX_CONTINUE;
792 }
793 
794 
795 /* actual transmit path */
796 
797 /*
798  * deal with packet injection down monitor interface
799  * with Radiotap Header -- only called for monitor mode interface
800  */
801 static ieee80211_tx_result
802 __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
803 			      struct sk_buff *skb)
804 {
805 	/*
806 	 * this is the moment to interpret and discard the radiotap header that
807 	 * must be at the start of the packet injected in Monitor mode
808 	 *
809 	 * Need to take some care with endian-ness since radiotap
810 	 * args are little-endian
811 	 */
812 
813 	struct ieee80211_radiotap_iterator iterator;
814 	struct ieee80211_radiotap_header *rthdr =
815 		(struct ieee80211_radiotap_header *) skb->data;
816 	struct ieee80211_supported_band *sband;
817 	int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
818 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
819 
820 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
821 
822 	skb->do_not_encrypt = 1;
823 	tx->flags &= ~IEEE80211_TX_FRAGMENTED;
824 
825 	/*
826 	 * for every radiotap entry that is present
827 	 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
828 	 * entries present, or -EINVAL on error)
829 	 */
830 
831 	while (!ret) {
832 		int i, target_rate;
833 
834 		ret = ieee80211_radiotap_iterator_next(&iterator);
835 
836 		if (ret)
837 			continue;
838 
839 		/* see if this argument is something we can use */
840 		switch (iterator.this_arg_index) {
841 		/*
842 		 * You must take care when dereferencing iterator.this_arg
843 		 * for multibyte types... the pointer is not aligned.  Use
844 		 * get_unaligned((type *)iterator.this_arg) to dereference
845 		 * iterator.this_arg for type "type" safely on all arches.
846 		*/
847 		case IEEE80211_RADIOTAP_RATE:
848 			/*
849 			 * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps
850 			 * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps
851 			 */
852 			target_rate = (*iterator.this_arg) * 5;
853 			for (i = 0; i < sband->n_bitrates; i++) {
854 				struct ieee80211_rate *r;
855 
856 				r = &sband->bitrates[i];
857 
858 				if (r->bitrate == target_rate) {
859 					tx->rate_idx = i;
860 					break;
861 				}
862 			}
863 			break;
864 
865 		case IEEE80211_RADIOTAP_ANTENNA:
866 			/*
867 			 * radiotap uses 0 for 1st ant, mac80211 is 1 for
868 			 * 1st ant
869 			 */
870 			info->antenna_sel_tx = (*iterator.this_arg) + 1;
871 			break;
872 
873 #if 0
874 		case IEEE80211_RADIOTAP_DBM_TX_POWER:
875 			control->power_level = *iterator.this_arg;
876 			break;
877 #endif
878 
879 		case IEEE80211_RADIOTAP_FLAGS:
880 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) {
881 				/*
882 				 * this indicates that the skb we have been
883 				 * handed has the 32-bit FCS CRC at the end...
884 				 * we should react to that by snipping it off
885 				 * because it will be recomputed and added
886 				 * on transmission
887 				 */
888 				if (skb->len < (iterator.max_length + FCS_LEN))
889 					return TX_DROP;
890 
891 				skb_trim(skb, skb->len - FCS_LEN);
892 			}
893 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
894 				tx->skb->do_not_encrypt = 0;
895 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
896 				tx->flags |= IEEE80211_TX_FRAGMENTED;
897 			break;
898 
899 		/*
900 		 * Please update the file
901 		 * Documentation/networking/mac80211-injection.txt
902 		 * when parsing new fields here.
903 		 */
904 
905 		default:
906 			break;
907 		}
908 	}
909 
910 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
911 		return TX_DROP;
912 
913 	/*
914 	 * remove the radiotap header
915 	 * iterator->max_length was sanity-checked against
916 	 * skb->len by iterator init
917 	 */
918 	skb_pull(skb, iterator.max_length);
919 
920 	return TX_CONTINUE;
921 }
922 
923 /*
924  * initialises @tx
925  */
926 static ieee80211_tx_result
927 __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
928 		       struct sk_buff *skb,
929 		       struct net_device *dev)
930 {
931 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
932 	struct ieee80211_hdr *hdr;
933 	struct ieee80211_sub_if_data *sdata;
934 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
935 
936 	int hdrlen;
937 
938 	memset(tx, 0, sizeof(*tx));
939 	tx->skb = skb;
940 	tx->dev = dev; /* use original interface */
941 	tx->local = local;
942 	tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
943 	tx->channel = local->hw.conf.channel;
944 	tx->rate_idx = -1;
945 	tx->last_frag_rate_idx = -1;
946 	/*
947 	 * Set this flag (used below to indicate "automatic fragmentation"),
948 	 * it will be cleared/left by radiotap as desired.
949 	 */
950 	tx->flags |= IEEE80211_TX_FRAGMENTED;
951 
952 	/* process and remove the injection radiotap header */
953 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
954 	if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) {
955 		if (__ieee80211_parse_tx_radiotap(tx, skb) == TX_DROP)
956 			return TX_DROP;
957 
958 		/*
959 		 * __ieee80211_parse_tx_radiotap has now removed
960 		 * the radiotap header that was present and pre-filled
961 		 * 'tx' with tx control information.
962 		 */
963 	}
964 
965 	hdr = (struct ieee80211_hdr *) skb->data;
966 
967 	tx->sta = sta_info_get(local, hdr->addr1);
968 
969 	if (is_multicast_ether_addr(hdr->addr1)) {
970 		tx->flags &= ~IEEE80211_TX_UNICAST;
971 		info->flags |= IEEE80211_TX_CTL_NO_ACK;
972 	} else {
973 		tx->flags |= IEEE80211_TX_UNICAST;
974 		info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
975 	}
976 
977 	if (tx->flags & IEEE80211_TX_FRAGMENTED) {
978 		if ((tx->flags & IEEE80211_TX_UNICAST) &&
979 		    skb->len + FCS_LEN > local->fragmentation_threshold &&
980 		    !local->ops->set_frag_threshold &&
981 		    !(info->flags & IEEE80211_TX_CTL_AMPDU))
982 			tx->flags |= IEEE80211_TX_FRAGMENTED;
983 		else
984 			tx->flags &= ~IEEE80211_TX_FRAGMENTED;
985 	}
986 
987 	if (!tx->sta)
988 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
989 	else if (test_and_clear_sta_flags(tx->sta, WLAN_STA_CLEAR_PS_FILT))
990 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
991 
992 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
993 	if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
994 		u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
995 		tx->ethertype = (pos[0] << 8) | pos[1];
996 	}
997 	info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT;
998 
999 	return TX_CONTINUE;
1000 }
1001 
1002 /*
1003  * NB: @tx is uninitialised when passed in here
1004  */
1005 static int ieee80211_tx_prepare(struct ieee80211_local *local,
1006 				struct ieee80211_tx_data *tx,
1007 				struct sk_buff *skb)
1008 {
1009 	struct net_device *dev;
1010 
1011 	dev = dev_get_by_index(&init_net, skb->iif);
1012 	if (unlikely(dev && !is_ieee80211_device(local, dev))) {
1013 		dev_put(dev);
1014 		dev = NULL;
1015 	}
1016 	if (unlikely(!dev))
1017 		return -ENODEV;
1018 	/* initialises tx with control */
1019 	__ieee80211_tx_prepare(tx, skb, dev);
1020 	dev_put(dev);
1021 	return 0;
1022 }
1023 
1024 static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
1025 			  struct ieee80211_tx_data *tx)
1026 {
1027 	struct ieee80211_tx_info *info;
1028 	int ret, i;
1029 
1030 	if (skb) {
1031 		if (netif_subqueue_stopped(local->mdev, skb))
1032 			return IEEE80211_TX_AGAIN;
1033 		info =  IEEE80211_SKB_CB(skb);
1034 
1035 		ret = local->ops->tx(local_to_hw(local), skb);
1036 		if (ret)
1037 			return IEEE80211_TX_AGAIN;
1038 		local->mdev->trans_start = jiffies;
1039 		ieee80211_led_tx(local, 1);
1040 	}
1041 	if (tx->extra_frag) {
1042 		for (i = 0; i < tx->num_extra_frag; i++) {
1043 			if (!tx->extra_frag[i])
1044 				continue;
1045 			info = IEEE80211_SKB_CB(tx->extra_frag[i]);
1046 			info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS |
1047 					 IEEE80211_TX_CTL_USE_CTS_PROTECT |
1048 					 IEEE80211_TX_CTL_CLEAR_PS_FILT |
1049 					 IEEE80211_TX_CTL_FIRST_FRAGMENT);
1050 			if (netif_subqueue_stopped(local->mdev,
1051 						   tx->extra_frag[i]))
1052 				return IEEE80211_TX_FRAG_AGAIN;
1053 			if (i == tx->num_extra_frag) {
1054 				info->tx_rate_idx = tx->last_frag_rate_idx;
1055 
1056 				if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG)
1057 					info->flags |=
1058 						IEEE80211_TX_CTL_RATE_CTRL_PROBE;
1059 				else
1060 					info->flags &=
1061 						~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
1062 			}
1063 
1064 			ret = local->ops->tx(local_to_hw(local),
1065 					    tx->extra_frag[i]);
1066 			if (ret)
1067 				return IEEE80211_TX_FRAG_AGAIN;
1068 			local->mdev->trans_start = jiffies;
1069 			ieee80211_led_tx(local, 1);
1070 			tx->extra_frag[i] = NULL;
1071 		}
1072 		kfree(tx->extra_frag);
1073 		tx->extra_frag = NULL;
1074 	}
1075 	return IEEE80211_TX_OK;
1076 }
1077 
1078 /*
1079  * Invoke TX handlers, return 0 on success and non-zero if the
1080  * frame was dropped or queued.
1081  */
1082 static int invoke_tx_handlers(struct ieee80211_tx_data *tx)
1083 {
1084 	struct sk_buff *skb = tx->skb;
1085 	ieee80211_tx_result res = TX_DROP;
1086 	int i;
1087 
1088 #define CALL_TXH(txh)		\
1089 	res = txh(tx);		\
1090 	if (res != TX_CONTINUE)	\
1091 		goto txh_done;
1092 
1093 	CALL_TXH(ieee80211_tx_h_check_assoc)
1094 	CALL_TXH(ieee80211_tx_h_ps_buf)
1095 	CALL_TXH(ieee80211_tx_h_select_key)
1096 	CALL_TXH(ieee80211_tx_h_michael_mic_add)
1097 	CALL_TXH(ieee80211_tx_h_rate_ctrl)
1098 	CALL_TXH(ieee80211_tx_h_misc)
1099 	CALL_TXH(ieee80211_tx_h_sequence)
1100 	CALL_TXH(ieee80211_tx_h_fragment)
1101 	/* handlers after fragment must be aware of tx info fragmentation! */
1102 	CALL_TXH(ieee80211_tx_h_encrypt)
1103 	CALL_TXH(ieee80211_tx_h_calculate_duration)
1104 	CALL_TXH(ieee80211_tx_h_stats)
1105 #undef CALL_TXH
1106 
1107  txh_done:
1108 	if (unlikely(res == TX_DROP)) {
1109 		I802_DEBUG_INC(tx->local->tx_handlers_drop);
1110 		dev_kfree_skb(skb);
1111 		for (i = 0; i < tx->num_extra_frag; i++)
1112 			if (tx->extra_frag[i])
1113 				dev_kfree_skb(tx->extra_frag[i]);
1114 		kfree(tx->extra_frag);
1115 		return -1;
1116 	} else if (unlikely(res == TX_QUEUED)) {
1117 		I802_DEBUG_INC(tx->local->tx_handlers_queued);
1118 		return -1;
1119 	}
1120 
1121 	return 0;
1122 }
1123 
1124 static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb)
1125 {
1126 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1127 	struct sta_info *sta;
1128 	struct ieee80211_tx_data tx;
1129 	ieee80211_tx_result res_prepare;
1130 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1131 	int ret, i;
1132 	u16 queue;
1133 
1134 	queue = skb_get_queue_mapping(skb);
1135 
1136 	WARN_ON(test_bit(queue, local->queues_pending));
1137 
1138 	if (unlikely(skb->len < 10)) {
1139 		dev_kfree_skb(skb);
1140 		return 0;
1141 	}
1142 
1143 	rcu_read_lock();
1144 
1145 	/* initialises tx */
1146 	res_prepare = __ieee80211_tx_prepare(&tx, skb, dev);
1147 
1148 	if (res_prepare == TX_DROP) {
1149 		dev_kfree_skb(skb);
1150 		rcu_read_unlock();
1151 		return 0;
1152 	}
1153 
1154 	sta = tx.sta;
1155 	tx.channel = local->hw.conf.channel;
1156 	info->band = tx.channel->band;
1157 
1158 	if (invoke_tx_handlers(&tx))
1159 		goto out;
1160 
1161 retry:
1162 	ret = __ieee80211_tx(local, skb, &tx);
1163 	if (ret) {
1164 		struct ieee80211_tx_stored_packet *store;
1165 
1166 		/*
1167 		 * Since there are no fragmented frames on A-MPDU
1168 		 * queues, there's no reason for a driver to reject
1169 		 * a frame there, warn and drop it.
1170 		 */
1171 		if (WARN_ON(queue >= ieee80211_num_regular_queues(&local->hw)))
1172 			goto drop;
1173 
1174 		store = &local->pending_packet[queue];
1175 
1176 		if (ret == IEEE80211_TX_FRAG_AGAIN)
1177 			skb = NULL;
1178 
1179 		set_bit(queue, local->queues_pending);
1180 		smp_mb();
1181 		/*
1182 		 * When the driver gets out of buffers during sending of
1183 		 * fragments and calls ieee80211_stop_queue, the netif
1184 		 * subqueue is stopped. There is, however, a small window
1185 		 * in which the PENDING bit is not yet set. If a buffer
1186 		 * gets available in that window (i.e. driver calls
1187 		 * ieee80211_wake_queue), we would end up with ieee80211_tx
1188 		 * called with the PENDING bit still set. Prevent this by
1189 		 * continuing transmitting here when that situation is
1190 		 * possible to have happened.
1191 		 */
1192 		if (!__netif_subqueue_stopped(local->mdev, queue)) {
1193 			clear_bit(queue, local->queues_pending);
1194 			goto retry;
1195 		}
1196 		store->skb = skb;
1197 		store->extra_frag = tx.extra_frag;
1198 		store->num_extra_frag = tx.num_extra_frag;
1199 		store->last_frag_rate_idx = tx.last_frag_rate_idx;
1200 		store->last_frag_rate_ctrl_probe =
1201 			!!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG);
1202 	}
1203  out:
1204 	rcu_read_unlock();
1205 	return 0;
1206 
1207  drop:
1208 	if (skb)
1209 		dev_kfree_skb(skb);
1210 	for (i = 0; i < tx.num_extra_frag; i++)
1211 		if (tx.extra_frag[i])
1212 			dev_kfree_skb(tx.extra_frag[i]);
1213 	kfree(tx.extra_frag);
1214 	rcu_read_unlock();
1215 	return 0;
1216 }
1217 
1218 /* device xmit handlers */
1219 
1220 static int ieee80211_skb_resize(struct ieee80211_local *local,
1221 				struct sk_buff *skb,
1222 				int head_need, bool may_encrypt)
1223 {
1224 	int tail_need = 0;
1225 
1226 	/*
1227 	 * This could be optimised, devices that do full hardware
1228 	 * crypto (including TKIP MMIC) need no tailroom... But we
1229 	 * have no drivers for such devices currently.
1230 	 */
1231 	if (may_encrypt) {
1232 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
1233 		tail_need -= skb_tailroom(skb);
1234 		tail_need = max_t(int, tail_need, 0);
1235 	}
1236 
1237 	if (head_need || tail_need) {
1238 		/* Sorry. Can't account for this any more */
1239 		skb_orphan(skb);
1240 	}
1241 
1242 	if (skb_header_cloned(skb))
1243 		I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
1244 	else
1245 		I802_DEBUG_INC(local->tx_expand_skb_head);
1246 
1247 	if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) {
1248 		printk(KERN_DEBUG "%s: failed to reallocate TX buffer\n",
1249 		       wiphy_name(local->hw.wiphy));
1250 		return -ENOMEM;
1251 	}
1252 
1253 	/* update truesize too */
1254 	skb->truesize += head_need + tail_need;
1255 
1256 	return 0;
1257 }
1258 
1259 int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
1260 {
1261 	struct ieee80211_master_priv *mpriv = netdev_priv(dev);
1262 	struct ieee80211_local *local = mpriv->local;
1263 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1264 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1265 	struct net_device *odev = NULL;
1266 	struct ieee80211_sub_if_data *osdata;
1267 	int headroom;
1268 	bool may_encrypt;
1269 	enum {
1270 		NOT_MONITOR,
1271 		FOUND_SDATA,
1272 		UNKNOWN_ADDRESS,
1273 	} monitor_iface = NOT_MONITOR;
1274 	int ret;
1275 
1276 	if (skb->iif)
1277 		odev = dev_get_by_index(&init_net, skb->iif);
1278 	if (unlikely(odev && !is_ieee80211_device(local, odev))) {
1279 		dev_put(odev);
1280 		odev = NULL;
1281 	}
1282 	if (unlikely(!odev)) {
1283 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1284 		printk(KERN_DEBUG "%s: Discarded packet with nonexistent "
1285 		       "originating device\n", dev->name);
1286 #endif
1287 		dev_kfree_skb(skb);
1288 		return 0;
1289 	}
1290 
1291 	memset(info, 0, sizeof(*info));
1292 
1293 	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1294 
1295 	osdata = IEEE80211_DEV_TO_SUB_IF(odev);
1296 
1297 	if (ieee80211_vif_is_mesh(&osdata->vif) &&
1298 	    ieee80211_is_data(hdr->frame_control)) {
1299 		if (is_multicast_ether_addr(hdr->addr3))
1300 			memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
1301 		else
1302 			if (mesh_nexthop_lookup(skb, osdata))
1303 				return  0;
1304 		if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
1305 			IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
1306 							    fwded_frames);
1307 	} else if (unlikely(osdata->vif.type == NL80211_IFTYPE_MONITOR)) {
1308 		struct ieee80211_sub_if_data *sdata;
1309 		int hdrlen;
1310 		u16 len_rthdr;
1311 
1312 		info->flags |= IEEE80211_TX_CTL_INJECTED;
1313 		monitor_iface = UNKNOWN_ADDRESS;
1314 
1315 		len_rthdr = ieee80211_get_radiotap_len(skb->data);
1316 		hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
1317 		hdrlen = ieee80211_hdrlen(hdr->frame_control);
1318 
1319 		/* check the header is complete in the frame */
1320 		if (likely(skb->len >= len_rthdr + hdrlen)) {
1321 			/*
1322 			 * We process outgoing injected frames that have a
1323 			 * local address we handle as though they are our
1324 			 * own frames.
1325 			 * This code here isn't entirely correct, the local
1326 			 * MAC address is not necessarily enough to find
1327 			 * the interface to use; for that proper VLAN/WDS
1328 			 * support we will need a different mechanism.
1329 			 */
1330 
1331 			rcu_read_lock();
1332 			list_for_each_entry_rcu(sdata, &local->interfaces,
1333 						list) {
1334 				if (!netif_running(sdata->dev))
1335 					continue;
1336 				if (compare_ether_addr(sdata->dev->dev_addr,
1337 						       hdr->addr2)) {
1338 					dev_hold(sdata->dev);
1339 					dev_put(odev);
1340 					osdata = sdata;
1341 					odev = osdata->dev;
1342 					skb->iif = sdata->dev->ifindex;
1343 					monitor_iface = FOUND_SDATA;
1344 					break;
1345 				}
1346 			}
1347 			rcu_read_unlock();
1348 		}
1349 	}
1350 
1351 	may_encrypt = !skb->do_not_encrypt;
1352 
1353 	headroom = osdata->local->tx_headroom;
1354 	if (may_encrypt)
1355 		headroom += IEEE80211_ENCRYPT_HEADROOM;
1356 	headroom -= skb_headroom(skb);
1357 	headroom = max_t(int, 0, headroom);
1358 
1359 	if (ieee80211_skb_resize(osdata->local, skb, headroom, may_encrypt)) {
1360 		dev_kfree_skb(skb);
1361 		dev_put(odev);
1362 		return 0;
1363 	}
1364 
1365 	if (osdata->vif.type == NL80211_IFTYPE_AP_VLAN)
1366 		osdata = container_of(osdata->bss,
1367 				      struct ieee80211_sub_if_data,
1368 				      u.ap);
1369 	if (likely(monitor_iface != UNKNOWN_ADDRESS))
1370 		info->control.vif = &osdata->vif;
1371 	ret = ieee80211_tx(odev, skb);
1372 	dev_put(odev);
1373 
1374 	return ret;
1375 }
1376 
1377 int ieee80211_monitor_start_xmit(struct sk_buff *skb,
1378 				 struct net_device *dev)
1379 {
1380 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1381 	struct ieee80211_radiotap_header *prthdr =
1382 		(struct ieee80211_radiotap_header *)skb->data;
1383 	u16 len_rthdr;
1384 
1385 	/* check for not even having the fixed radiotap header part */
1386 	if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
1387 		goto fail; /* too short to be possibly valid */
1388 
1389 	/* is it a header version we can trust to find length from? */
1390 	if (unlikely(prthdr->it_version))
1391 		goto fail; /* only version 0 is supported */
1392 
1393 	/* then there must be a radiotap header with a length we can use */
1394 	len_rthdr = ieee80211_get_radiotap_len(skb->data);
1395 
1396 	/* does the skb contain enough to deliver on the alleged length? */
1397 	if (unlikely(skb->len < len_rthdr))
1398 		goto fail; /* skb too short for claimed rt header extent */
1399 
1400 	skb->dev = local->mdev;
1401 
1402 	/* needed because we set skb device to master */
1403 	skb->iif = dev->ifindex;
1404 
1405 	/* sometimes we do encrypt injected frames, will be fixed
1406 	 * up in radiotap parser if not wanted */
1407 	skb->do_not_encrypt = 0;
1408 
1409 	/*
1410 	 * fix up the pointers accounting for the radiotap
1411 	 * header still being in there.  We are being given
1412 	 * a precooked IEEE80211 header so no need for
1413 	 * normal processing
1414 	 */
1415 	skb_set_mac_header(skb, len_rthdr);
1416 	/*
1417 	 * these are just fixed to the end of the rt area since we
1418 	 * don't have any better information and at this point, nobody cares
1419 	 */
1420 	skb_set_network_header(skb, len_rthdr);
1421 	skb_set_transport_header(skb, len_rthdr);
1422 
1423 	/* pass the radiotap header up to the next stage intact */
1424 	dev_queue_xmit(skb);
1425 	return NETDEV_TX_OK;
1426 
1427 fail:
1428 	dev_kfree_skb(skb);
1429 	return NETDEV_TX_OK; /* meaning, we dealt with the skb */
1430 }
1431 
1432 /**
1433  * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type
1434  * subinterfaces (wlan#, WDS, and VLAN interfaces)
1435  * @skb: packet to be sent
1436  * @dev: incoming interface
1437  *
1438  * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will
1439  * not be freed, and caller is responsible for either retrying later or freeing
1440  * skb).
1441  *
1442  * This function takes in an Ethernet header and encapsulates it with suitable
1443  * IEEE 802.11 header based on which interface the packet is coming in. The
1444  * encapsulated packet will then be passed to master interface, wlan#.11, for
1445  * transmission (through low-level driver).
1446  */
1447 int ieee80211_subif_start_xmit(struct sk_buff *skb,
1448 			       struct net_device *dev)
1449 {
1450 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1451 	struct ieee80211_local *local = sdata->local;
1452 	int ret = 1, head_need;
1453 	u16 ethertype, hdrlen,  meshhdrlen = 0;
1454 	__le16 fc;
1455 	struct ieee80211_hdr hdr;
1456 	struct ieee80211s_hdr mesh_hdr;
1457 	const u8 *encaps_data;
1458 	int encaps_len, skip_header_bytes;
1459 	int nh_pos, h_pos;
1460 	struct sta_info *sta;
1461 	u32 sta_flags = 0;
1462 
1463 	if (unlikely(skb->len < ETH_HLEN)) {
1464 		ret = 0;
1465 		goto fail;
1466 	}
1467 
1468 	nh_pos = skb_network_header(skb) - skb->data;
1469 	h_pos = skb_transport_header(skb) - skb->data;
1470 
1471 	/* convert Ethernet header to proper 802.11 header (based on
1472 	 * operation mode) */
1473 	ethertype = (skb->data[12] << 8) | skb->data[13];
1474 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
1475 
1476 	switch (sdata->vif.type) {
1477 	case NL80211_IFTYPE_AP:
1478 	case NL80211_IFTYPE_AP_VLAN:
1479 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
1480 		/* DA BSSID SA */
1481 		memcpy(hdr.addr1, skb->data, ETH_ALEN);
1482 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1483 		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
1484 		hdrlen = 24;
1485 		break;
1486 	case NL80211_IFTYPE_WDS:
1487 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1488 		/* RA TA DA SA */
1489 		memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN);
1490 		memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1491 		memcpy(hdr.addr3, skb->data, ETH_ALEN);
1492 		memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
1493 		hdrlen = 30;
1494 		break;
1495 #ifdef CONFIG_MAC80211_MESH
1496 	case NL80211_IFTYPE_MESH_POINT:
1497 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1498 		if (!sdata->u.mesh.mshcfg.dot11MeshTTL) {
1499 			/* Do not send frames with mesh_ttl == 0 */
1500 			sdata->u.mesh.mshstats.dropped_frames_ttl++;
1501 			ret = 0;
1502 			goto fail;
1503 		}
1504 		memset(&mesh_hdr, 0, sizeof(mesh_hdr));
1505 
1506 		if (compare_ether_addr(dev->dev_addr,
1507 					  skb->data + ETH_ALEN) == 0) {
1508 			/* RA TA DA SA */
1509 			memset(hdr.addr1, 0, ETH_ALEN);
1510 			memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1511 			memcpy(hdr.addr3, skb->data, ETH_ALEN);
1512 			memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
1513 			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata);
1514 		} else {
1515 			/* packet from other interface */
1516 			struct mesh_path *mppath;
1517 
1518 			memset(hdr.addr1, 0, ETH_ALEN);
1519 			memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1520 			memcpy(hdr.addr4, dev->dev_addr, ETH_ALEN);
1521 
1522 			if (is_multicast_ether_addr(skb->data))
1523 				memcpy(hdr.addr3, skb->data, ETH_ALEN);
1524 			else {
1525 				rcu_read_lock();
1526 				mppath = mpp_path_lookup(skb->data, sdata);
1527 				if (mppath)
1528 					memcpy(hdr.addr3, mppath->mpp, ETH_ALEN);
1529 				else
1530 					memset(hdr.addr3, 0xff, ETH_ALEN);
1531 				rcu_read_unlock();
1532 			}
1533 
1534 			mesh_hdr.flags |= MESH_FLAGS_AE_A5_A6;
1535 			mesh_hdr.ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
1536 			put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &mesh_hdr.seqnum);
1537 			memcpy(mesh_hdr.eaddr1, skb->data, ETH_ALEN);
1538 			memcpy(mesh_hdr.eaddr2, skb->data + ETH_ALEN, ETH_ALEN);
1539 			sdata->u.mesh.mesh_seqnum++;
1540 			meshhdrlen = 18;
1541 		}
1542 		hdrlen = 30;
1543 		break;
1544 #endif
1545 	case NL80211_IFTYPE_STATION:
1546 		fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
1547 		/* BSSID SA DA */
1548 		memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN);
1549 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
1550 		memcpy(hdr.addr3, skb->data, ETH_ALEN);
1551 		hdrlen = 24;
1552 		break;
1553 	case NL80211_IFTYPE_ADHOC:
1554 		/* DA SA BSSID */
1555 		memcpy(hdr.addr1, skb->data, ETH_ALEN);
1556 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
1557 		memcpy(hdr.addr3, sdata->u.sta.bssid, ETH_ALEN);
1558 		hdrlen = 24;
1559 		break;
1560 	default:
1561 		ret = 0;
1562 		goto fail;
1563 	}
1564 
1565 	/*
1566 	 * There's no need to try to look up the destination
1567 	 * if it is a multicast address (which can only happen
1568 	 * in AP mode)
1569 	 */
1570 	if (!is_multicast_ether_addr(hdr.addr1)) {
1571 		rcu_read_lock();
1572 		sta = sta_info_get(local, hdr.addr1);
1573 		if (sta)
1574 			sta_flags = get_sta_flags(sta);
1575 		rcu_read_unlock();
1576 	}
1577 
1578 	/* receiver and we are QoS enabled, use a QoS type frame */
1579 	if (sta_flags & WLAN_STA_WME &&
1580 	    ieee80211_num_regular_queues(&local->hw) >= 4) {
1581 		fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
1582 		hdrlen += 2;
1583 	}
1584 
1585 	/*
1586 	 * Drop unicast frames to unauthorised stations unless they are
1587 	 * EAPOL frames from the local station.
1588 	 */
1589 	if (!ieee80211_vif_is_mesh(&sdata->vif) &&
1590 		unlikely(!is_multicast_ether_addr(hdr.addr1) &&
1591 		      !(sta_flags & WLAN_STA_AUTHORIZED) &&
1592 		      !(ethertype == ETH_P_PAE &&
1593 		       compare_ether_addr(dev->dev_addr,
1594 					  skb->data + ETH_ALEN) == 0))) {
1595 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1596 		DECLARE_MAC_BUF(mac);
1597 
1598 		if (net_ratelimit())
1599 			printk(KERN_DEBUG "%s: dropped frame to %s"
1600 			       " (unauthorized port)\n", dev->name,
1601 			       print_mac(mac, hdr.addr1));
1602 #endif
1603 
1604 		I802_DEBUG_INC(local->tx_handlers_drop_unauth_port);
1605 
1606 		ret = 0;
1607 		goto fail;
1608 	}
1609 
1610 	hdr.frame_control = fc;
1611 	hdr.duration_id = 0;
1612 	hdr.seq_ctrl = 0;
1613 
1614 	skip_header_bytes = ETH_HLEN;
1615 	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
1616 		encaps_data = bridge_tunnel_header;
1617 		encaps_len = sizeof(bridge_tunnel_header);
1618 		skip_header_bytes -= 2;
1619 	} else if (ethertype >= 0x600) {
1620 		encaps_data = rfc1042_header;
1621 		encaps_len = sizeof(rfc1042_header);
1622 		skip_header_bytes -= 2;
1623 	} else {
1624 		encaps_data = NULL;
1625 		encaps_len = 0;
1626 	}
1627 
1628 	skb_pull(skb, skip_header_bytes);
1629 	nh_pos -= skip_header_bytes;
1630 	h_pos -= skip_header_bytes;
1631 
1632 	head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb);
1633 
1634 	/*
1635 	 * So we need to modify the skb header and hence need a copy of
1636 	 * that. The head_need variable above doesn't, so far, include
1637 	 * the needed header space that we don't need right away. If we
1638 	 * can, then we don't reallocate right now but only after the
1639 	 * frame arrives at the master device (if it does...)
1640 	 *
1641 	 * If we cannot, however, then we will reallocate to include all
1642 	 * the ever needed space. Also, if we need to reallocate it anyway,
1643 	 * make it big enough for everything we may ever need.
1644 	 */
1645 
1646 	if (head_need > 0 || skb_cloned(skb)) {
1647 		head_need += IEEE80211_ENCRYPT_HEADROOM;
1648 		head_need += local->tx_headroom;
1649 		head_need = max_t(int, 0, head_need);
1650 		if (ieee80211_skb_resize(local, skb, head_need, true))
1651 			goto fail;
1652 	}
1653 
1654 	if (encaps_data) {
1655 		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
1656 		nh_pos += encaps_len;
1657 		h_pos += encaps_len;
1658 	}
1659 
1660 	if (meshhdrlen > 0) {
1661 		memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
1662 		nh_pos += meshhdrlen;
1663 		h_pos += meshhdrlen;
1664 	}
1665 
1666 	if (ieee80211_is_data_qos(fc)) {
1667 		__le16 *qos_control;
1668 
1669 		qos_control = (__le16*) skb_push(skb, 2);
1670 		memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2);
1671 		/*
1672 		 * Maybe we could actually set some fields here, for now just
1673 		 * initialise to zero to indicate no special operation.
1674 		 */
1675 		*qos_control = 0;
1676 	} else
1677 		memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
1678 
1679 	nh_pos += hdrlen;
1680 	h_pos += hdrlen;
1681 
1682 	skb->iif = dev->ifindex;
1683 
1684 	skb->dev = local->mdev;
1685 	dev->stats.tx_packets++;
1686 	dev->stats.tx_bytes += skb->len;
1687 
1688 	/* Update skb pointers to various headers since this modified frame
1689 	 * is going to go through Linux networking code that may potentially
1690 	 * need things like pointer to IP header. */
1691 	skb_set_mac_header(skb, 0);
1692 	skb_set_network_header(skb, nh_pos);
1693 	skb_set_transport_header(skb, h_pos);
1694 
1695 	dev->trans_start = jiffies;
1696 	dev_queue_xmit(skb);
1697 
1698 	return 0;
1699 
1700  fail:
1701 	if (!ret)
1702 		dev_kfree_skb(skb);
1703 
1704 	return ret;
1705 }
1706 
1707 
1708 /*
1709  * ieee80211_clear_tx_pending may not be called in a context where
1710  * it is possible that it packets could come in again.
1711  */
1712 void ieee80211_clear_tx_pending(struct ieee80211_local *local)
1713 {
1714 	int i, j;
1715 	struct ieee80211_tx_stored_packet *store;
1716 
1717 	for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
1718 		if (!test_bit(i, local->queues_pending))
1719 			continue;
1720 		store = &local->pending_packet[i];
1721 		kfree_skb(store->skb);
1722 		for (j = 0; j < store->num_extra_frag; j++)
1723 			kfree_skb(store->extra_frag[j]);
1724 		kfree(store->extra_frag);
1725 		clear_bit(i, local->queues_pending);
1726 	}
1727 }
1728 
1729 /*
1730  * Transmit all pending packets. Called from tasklet, locks master device
1731  * TX lock so that no new packets can come in.
1732  */
1733 void ieee80211_tx_pending(unsigned long data)
1734 {
1735 	struct ieee80211_local *local = (struct ieee80211_local *)data;
1736 	struct net_device *dev = local->mdev;
1737 	struct ieee80211_tx_stored_packet *store;
1738 	struct ieee80211_tx_data tx;
1739 	int i, ret;
1740 
1741 	netif_tx_lock_bh(dev);
1742 	for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
1743 		/* Check that this queue is ok */
1744 		if (__netif_subqueue_stopped(local->mdev, i) &&
1745 		    !test_bit(i, local->queues_pending_run))
1746 			continue;
1747 
1748 		if (!test_bit(i, local->queues_pending)) {
1749 			clear_bit(i, local->queues_pending_run);
1750 			ieee80211_wake_queue(&local->hw, i);
1751 			continue;
1752 		}
1753 
1754 		clear_bit(i, local->queues_pending_run);
1755 		netif_start_subqueue(local->mdev, i);
1756 
1757 		store = &local->pending_packet[i];
1758 		tx.extra_frag = store->extra_frag;
1759 		tx.num_extra_frag = store->num_extra_frag;
1760 		tx.last_frag_rate_idx = store->last_frag_rate_idx;
1761 		tx.flags = 0;
1762 		if (store->last_frag_rate_ctrl_probe)
1763 			tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG;
1764 		ret = __ieee80211_tx(local, store->skb, &tx);
1765 		if (ret) {
1766 			if (ret == IEEE80211_TX_FRAG_AGAIN)
1767 				store->skb = NULL;
1768 		} else {
1769 			clear_bit(i, local->queues_pending);
1770 			ieee80211_wake_queue(&local->hw, i);
1771 		}
1772 	}
1773 	netif_tx_unlock_bh(dev);
1774 }
1775 
1776 /* functions for drivers to get certain frames */
1777 
1778 static void ieee80211_beacon_add_tim(struct ieee80211_local *local,
1779 				     struct ieee80211_if_ap *bss,
1780 				     struct sk_buff *skb,
1781 				     struct beacon_data *beacon)
1782 {
1783 	u8 *pos, *tim;
1784 	int aid0 = 0;
1785 	int i, have_bits = 0, n1, n2;
1786 
1787 	/* Generate bitmap for TIM only if there are any STAs in power save
1788 	 * mode. */
1789 	if (atomic_read(&bss->num_sta_ps) > 0)
1790 		/* in the hope that this is faster than
1791 		 * checking byte-for-byte */
1792 		have_bits = !bitmap_empty((unsigned long*)bss->tim,
1793 					  IEEE80211_MAX_AID+1);
1794 
1795 	if (bss->dtim_count == 0)
1796 		bss->dtim_count = beacon->dtim_period - 1;
1797 	else
1798 		bss->dtim_count--;
1799 
1800 	tim = pos = (u8 *) skb_put(skb, 6);
1801 	*pos++ = WLAN_EID_TIM;
1802 	*pos++ = 4;
1803 	*pos++ = bss->dtim_count;
1804 	*pos++ = beacon->dtim_period;
1805 
1806 	if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf))
1807 		aid0 = 1;
1808 
1809 	if (have_bits) {
1810 		/* Find largest even number N1 so that bits numbered 1 through
1811 		 * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits
1812 		 * (N2 + 1) x 8 through 2007 are 0. */
1813 		n1 = 0;
1814 		for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) {
1815 			if (bss->tim[i]) {
1816 				n1 = i & 0xfe;
1817 				break;
1818 			}
1819 		}
1820 		n2 = n1;
1821 		for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) {
1822 			if (bss->tim[i]) {
1823 				n2 = i;
1824 				break;
1825 			}
1826 		}
1827 
1828 		/* Bitmap control */
1829 		*pos++ = n1 | aid0;
1830 		/* Part Virt Bitmap */
1831 		memcpy(pos, bss->tim + n1, n2 - n1 + 1);
1832 
1833 		tim[1] = n2 - n1 + 4;
1834 		skb_put(skb, n2 - n1);
1835 	} else {
1836 		*pos++ = aid0; /* Bitmap control */
1837 		*pos++ = 0; /* Part Virt Bitmap */
1838 	}
1839 }
1840 
1841 struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
1842 				     struct ieee80211_vif *vif)
1843 {
1844 	struct ieee80211_local *local = hw_to_local(hw);
1845 	struct sk_buff *skb = NULL;
1846 	struct ieee80211_tx_info *info;
1847 	struct net_device *bdev;
1848 	struct ieee80211_sub_if_data *sdata = NULL;
1849 	struct ieee80211_if_ap *ap = NULL;
1850 	struct ieee80211_if_sta *ifsta = NULL;
1851 	struct rate_selection rsel;
1852 	struct beacon_data *beacon;
1853 	struct ieee80211_supported_band *sband;
1854 	enum ieee80211_band band = local->hw.conf.channel->band;
1855 
1856 	sband = local->hw.wiphy->bands[band];
1857 
1858 	rcu_read_lock();
1859 
1860 	sdata = vif_to_sdata(vif);
1861 	bdev = sdata->dev;
1862 
1863 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
1864 		ap = &sdata->u.ap;
1865 		beacon = rcu_dereference(ap->beacon);
1866 		if (ap && beacon) {
1867 			/*
1868 			 * headroom, head length,
1869 			 * tail length and maximum TIM length
1870 			 */
1871 			skb = dev_alloc_skb(local->tx_headroom +
1872 					    beacon->head_len +
1873 					    beacon->tail_len + 256);
1874 			if (!skb)
1875 				goto out;
1876 
1877 			skb_reserve(skb, local->tx_headroom);
1878 			memcpy(skb_put(skb, beacon->head_len), beacon->head,
1879 			       beacon->head_len);
1880 
1881 			/*
1882 			 * Not very nice, but we want to allow the driver to call
1883 			 * ieee80211_beacon_get() as a response to the set_tim()
1884 			 * callback. That, however, is already invoked under the
1885 			 * sta_lock to guarantee consistent and race-free update
1886 			 * of the tim bitmap in mac80211 and the driver.
1887 			 */
1888 			if (local->tim_in_locked_section) {
1889 				ieee80211_beacon_add_tim(local, ap, skb, beacon);
1890 			} else {
1891 				unsigned long flags;
1892 
1893 				spin_lock_irqsave(&local->sta_lock, flags);
1894 				ieee80211_beacon_add_tim(local, ap, skb, beacon);
1895 				spin_unlock_irqrestore(&local->sta_lock, flags);
1896 			}
1897 
1898 			if (beacon->tail)
1899 				memcpy(skb_put(skb, beacon->tail_len),
1900 				       beacon->tail, beacon->tail_len);
1901 		} else
1902 			goto out;
1903 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
1904 		struct ieee80211_hdr *hdr;
1905 		ifsta = &sdata->u.sta;
1906 
1907 		if (!ifsta->probe_resp)
1908 			goto out;
1909 
1910 		skb = skb_copy(ifsta->probe_resp, GFP_ATOMIC);
1911 		if (!skb)
1912 			goto out;
1913 
1914 		hdr = (struct ieee80211_hdr *) skb->data;
1915 		hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1916 						 IEEE80211_STYPE_BEACON);
1917 
1918 	} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
1919 		struct ieee80211_mgmt *mgmt;
1920 		u8 *pos;
1921 
1922 		/* headroom, head length, tail length and maximum TIM length */
1923 		skb = dev_alloc_skb(local->tx_headroom + 400);
1924 		if (!skb)
1925 			goto out;
1926 
1927 		skb_reserve(skb, local->hw.extra_tx_headroom);
1928 		mgmt = (struct ieee80211_mgmt *)
1929 			skb_put(skb, 24 + sizeof(mgmt->u.beacon));
1930 		memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
1931 		mgmt->frame_control =
1932 		    cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
1933 		memset(mgmt->da, 0xff, ETH_ALEN);
1934 		memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
1935 		/* BSSID is left zeroed, wildcard value */
1936 		mgmt->u.beacon.beacon_int =
1937 			cpu_to_le16(local->hw.conf.beacon_int);
1938 		mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
1939 
1940 		pos = skb_put(skb, 2);
1941 		*pos++ = WLAN_EID_SSID;
1942 		*pos++ = 0x0;
1943 
1944 		mesh_mgmt_ies_add(skb, sdata);
1945 	} else {
1946 		WARN_ON(1);
1947 		goto out;
1948 	}
1949 
1950 	info = IEEE80211_SKB_CB(skb);
1951 
1952 	skb->do_not_encrypt = 1;
1953 
1954 	info->band = band;
1955 	rate_control_get_rate(sdata, sband, NULL, skb, &rsel);
1956 
1957 	if (unlikely(rsel.rate_idx < 0)) {
1958 		if (net_ratelimit()) {
1959 			printk(KERN_DEBUG "%s: ieee80211_beacon_get: "
1960 			       "no rate found\n",
1961 			       wiphy_name(local->hw.wiphy));
1962 		}
1963 		dev_kfree_skb_any(skb);
1964 		skb = NULL;
1965 		goto out;
1966 	}
1967 
1968 	info->control.vif = vif;
1969 	info->tx_rate_idx = rsel.rate_idx;
1970 
1971 	info->flags |= IEEE80211_TX_CTL_NO_ACK;
1972 	info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
1973 	info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
1974 	if (sdata->bss_conf.use_short_preamble &&
1975 	    sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
1976 		info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
1977 
1978 	info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
1979 	info->control.retry_limit = 1;
1980 
1981 out:
1982 	rcu_read_unlock();
1983 	return skb;
1984 }
1985 EXPORT_SYMBOL(ieee80211_beacon_get);
1986 
1987 void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1988 		       const void *frame, size_t frame_len,
1989 		       const struct ieee80211_tx_info *frame_txctl,
1990 		       struct ieee80211_rts *rts)
1991 {
1992 	const struct ieee80211_hdr *hdr = frame;
1993 
1994 	rts->frame_control =
1995 	    cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
1996 	rts->duration = ieee80211_rts_duration(hw, vif, frame_len,
1997 					       frame_txctl);
1998 	memcpy(rts->ra, hdr->addr1, sizeof(rts->ra));
1999 	memcpy(rts->ta, hdr->addr2, sizeof(rts->ta));
2000 }
2001 EXPORT_SYMBOL(ieee80211_rts_get);
2002 
2003 void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2004 			     const void *frame, size_t frame_len,
2005 			     const struct ieee80211_tx_info *frame_txctl,
2006 			     struct ieee80211_cts *cts)
2007 {
2008 	const struct ieee80211_hdr *hdr = frame;
2009 
2010 	cts->frame_control =
2011 	    cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
2012 	cts->duration = ieee80211_ctstoself_duration(hw, vif,
2013 						     frame_len, frame_txctl);
2014 	memcpy(cts->ra, hdr->addr1, sizeof(cts->ra));
2015 }
2016 EXPORT_SYMBOL(ieee80211_ctstoself_get);
2017 
2018 struct sk_buff *
2019 ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
2020 			  struct ieee80211_vif *vif)
2021 {
2022 	struct ieee80211_local *local = hw_to_local(hw);
2023 	struct sk_buff *skb = NULL;
2024 	struct sta_info *sta;
2025 	struct ieee80211_tx_data tx;
2026 	struct net_device *bdev;
2027 	struct ieee80211_sub_if_data *sdata;
2028 	struct ieee80211_if_ap *bss = NULL;
2029 	struct beacon_data *beacon;
2030 	struct ieee80211_tx_info *info;
2031 
2032 	sdata = vif_to_sdata(vif);
2033 	bdev = sdata->dev;
2034 	bss = &sdata->u.ap;
2035 
2036 	if (!bss)
2037 		return NULL;
2038 
2039 	rcu_read_lock();
2040 	beacon = rcu_dereference(bss->beacon);
2041 
2042 	if (sdata->vif.type != NL80211_IFTYPE_AP || !beacon || !beacon->head)
2043 		goto out;
2044 
2045 	if (bss->dtim_count != 0)
2046 		goto out; /* send buffered bc/mc only after DTIM beacon */
2047 
2048 	while (1) {
2049 		skb = skb_dequeue(&bss->ps_bc_buf);
2050 		if (!skb)
2051 			goto out;
2052 		local->total_ps_buffered--;
2053 
2054 		if (!skb_queue_empty(&bss->ps_bc_buf) && skb->len >= 2) {
2055 			struct ieee80211_hdr *hdr =
2056 				(struct ieee80211_hdr *) skb->data;
2057 			/* more buffered multicast/broadcast frames ==> set
2058 			 * MoreData flag in IEEE 802.11 header to inform PS
2059 			 * STAs */
2060 			hdr->frame_control |=
2061 				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
2062 		}
2063 
2064 		if (!ieee80211_tx_prepare(local, &tx, skb))
2065 			break;
2066 		dev_kfree_skb_any(skb);
2067 	}
2068 
2069 	info = IEEE80211_SKB_CB(skb);
2070 
2071 	sta = tx.sta;
2072 	tx.flags |= IEEE80211_TX_PS_BUFFERED;
2073 	tx.channel = local->hw.conf.channel;
2074 	info->band = tx.channel->band;
2075 
2076 	if (invoke_tx_handlers(&tx))
2077 		skb = NULL;
2078  out:
2079 	rcu_read_unlock();
2080 
2081 	return skb;
2082 }
2083 EXPORT_SYMBOL(ieee80211_get_buffered_bc);
2084