1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * BSS client mode implementation 4 * Copyright 2003-2008, Jouni Malinen <j@w1.fi> 5 * Copyright 2004, Instant802 Networks, Inc. 6 * Copyright 2005, Devicescape Software, Inc. 7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> 8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net> 9 * Copyright 2013-2014 Intel Mobile Communications GmbH 10 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH 11 * Copyright (C) 2018 - 2020 Intel Corporation 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/fips.h> 16 #include <linux/if_ether.h> 17 #include <linux/skbuff.h> 18 #include <linux/if_arp.h> 19 #include <linux/etherdevice.h> 20 #include <linux/moduleparam.h> 21 #include <linux/rtnetlink.h> 22 #include <linux/crc32.h> 23 #include <linux/slab.h> 24 #include <linux/export.h> 25 #include <net/mac80211.h> 26 #include <asm/unaligned.h> 27 28 #include "ieee80211_i.h" 29 #include "driver-ops.h" 30 #include "rate.h" 31 #include "led.h" 32 #include "fils_aead.h" 33 34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5) 35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) 36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) 37 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2) 38 #define IEEE80211_AUTH_MAX_TRIES 3 39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) 40 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) 41 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) 42 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) 43 #define IEEE80211_ASSOC_MAX_TRIES 3 44 45 static int max_nullfunc_tries = 2; 46 module_param(max_nullfunc_tries, int, 0644); 47 MODULE_PARM_DESC(max_nullfunc_tries, 48 "Maximum nullfunc tx tries before disconnecting (reason 4)."); 49 50 static int max_probe_tries = 5; 51 module_param(max_probe_tries, int, 0644); 52 MODULE_PARM_DESC(max_probe_tries, 53 "Maximum probe tries before disconnecting (reason 4)."); 54 55 /* 56 * Beacon loss timeout is calculated as N frames times the 57 * advertised beacon interval. This may need to be somewhat 58 * higher than what hardware might detect to account for 59 * delays in the host processing frames. But since we also 60 * probe on beacon miss before declaring the connection lost 61 * default to what we want. 62 */ 63 static int beacon_loss_count = 7; 64 module_param(beacon_loss_count, int, 0644); 65 MODULE_PARM_DESC(beacon_loss_count, 66 "Number of beacon intervals before we decide beacon was lost."); 67 68 /* 69 * Time the connection can be idle before we probe 70 * it to see if we can still talk to the AP. 71 */ 72 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) 73 /* 74 * Time we wait for a probe response after sending 75 * a probe request because of beacon loss or for 76 * checking the connection still works. 77 */ 78 static int probe_wait_ms = 500; 79 module_param(probe_wait_ms, int, 0644); 80 MODULE_PARM_DESC(probe_wait_ms, 81 "Maximum time(ms) to wait for probe response" 82 " before disconnecting (reason 4)."); 83 84 /* 85 * How many Beacon frames need to have been used in average signal strength 86 * before starting to indicate signal change events. 87 */ 88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 89 90 /* 91 * We can have multiple work items (and connection probing) 92 * scheduling this timer, but we need to take care to only 93 * reschedule it when it should fire _earlier_ than it was 94 * asked for before, or if it's not pending right now. This 95 * function ensures that. Note that it then is required to 96 * run this function for all timeouts after the first one 97 * has happened -- the work that runs from this timer will 98 * do that. 99 */ 100 static void run_again(struct ieee80211_sub_if_data *sdata, 101 unsigned long timeout) 102 { 103 sdata_assert_lock(sdata); 104 105 if (!timer_pending(&sdata->u.mgd.timer) || 106 time_before(timeout, sdata->u.mgd.timer.expires)) 107 mod_timer(&sdata->u.mgd.timer, timeout); 108 } 109 110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) 111 { 112 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) 113 return; 114 115 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 116 return; 117 118 mod_timer(&sdata->u.mgd.bcn_mon_timer, 119 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); 120 } 121 122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) 123 { 124 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 125 126 if (unlikely(!ifmgd->associated)) 127 return; 128 129 if (ifmgd->probe_send_count) 130 ifmgd->probe_send_count = 0; 131 132 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 133 return; 134 135 mod_timer(&ifmgd->conn_mon_timer, 136 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); 137 } 138 139 static int ecw2cw(int ecw) 140 { 141 return (1 << ecw) - 1; 142 } 143 144 static u32 145 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, 146 struct ieee80211_supported_band *sband, 147 struct ieee80211_channel *channel, 148 u32 vht_cap_info, 149 const struct ieee80211_ht_operation *ht_oper, 150 const struct ieee80211_vht_operation *vht_oper, 151 const struct ieee80211_he_operation *he_oper, 152 struct cfg80211_chan_def *chandef, bool tracking) 153 { 154 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 155 struct cfg80211_chan_def vht_chandef; 156 struct ieee80211_sta_ht_cap sta_ht_cap; 157 u32 ht_cfreq, ret; 158 159 memset(chandef, 0, sizeof(struct cfg80211_chan_def)); 160 chandef->chan = channel; 161 chandef->width = NL80211_CHAN_WIDTH_20_NOHT; 162 chandef->center_freq1 = channel->center_freq; 163 chandef->freq1_offset = channel->freq_offset; 164 165 if (channel->band == NL80211_BAND_6GHZ) { 166 if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, chandef)) 167 ret = IEEE80211_STA_DISABLE_HT | 168 IEEE80211_STA_DISABLE_VHT | 169 IEEE80211_STA_DISABLE_HE; 170 else 171 ret = 0; 172 vht_chandef = *chandef; 173 goto out; 174 } 175 176 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); 177 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); 178 179 if (!ht_oper || !sta_ht_cap.ht_supported) { 180 ret = IEEE80211_STA_DISABLE_HT | 181 IEEE80211_STA_DISABLE_VHT | 182 IEEE80211_STA_DISABLE_HE; 183 goto out; 184 } 185 186 chandef->width = NL80211_CHAN_WIDTH_20; 187 188 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, 189 channel->band); 190 /* check that channel matches the right operating channel */ 191 if (!tracking && channel->center_freq != ht_cfreq) { 192 /* 193 * It's possible that some APs are confused here; 194 * Netgear WNDR3700 sometimes reports 4 higher than 195 * the actual channel in association responses, but 196 * since we look at probe response/beacon data here 197 * it should be OK. 198 */ 199 sdata_info(sdata, 200 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", 201 channel->center_freq, ht_cfreq, 202 ht_oper->primary_chan, channel->band); 203 ret = IEEE80211_STA_DISABLE_HT | 204 IEEE80211_STA_DISABLE_VHT | 205 IEEE80211_STA_DISABLE_HE; 206 goto out; 207 } 208 209 /* check 40 MHz support, if we have it */ 210 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { 211 ieee80211_chandef_ht_oper(ht_oper, chandef); 212 } else { 213 /* 40 MHz (and 80 MHz) must be supported for VHT */ 214 ret = IEEE80211_STA_DISABLE_VHT; 215 /* also mark 40 MHz disabled */ 216 ret |= IEEE80211_STA_DISABLE_40MHZ; 217 goto out; 218 } 219 220 if (!vht_oper || !sband->vht_cap.vht_supported) { 221 ret = IEEE80211_STA_DISABLE_VHT; 222 goto out; 223 } 224 225 vht_chandef = *chandef; 226 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper && 227 (le32_to_cpu(he_oper->he_oper_params) & 228 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { 229 struct ieee80211_vht_operation he_oper_vht_cap; 230 231 /* 232 * Set only first 3 bytes (other 2 aren't used in 233 * ieee80211_chandef_vht_oper() anyway) 234 */ 235 memcpy(&he_oper_vht_cap, he_oper->optional, 3); 236 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0); 237 238 if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, 239 &he_oper_vht_cap, ht_oper, 240 &vht_chandef)) { 241 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 242 sdata_info(sdata, 243 "HE AP VHT information is invalid, disable HE\n"); 244 ret = IEEE80211_STA_DISABLE_HE; 245 goto out; 246 } 247 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, 248 vht_cap_info, 249 vht_oper, ht_oper, 250 &vht_chandef)) { 251 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 252 sdata_info(sdata, 253 "AP VHT information is invalid, disable VHT\n"); 254 ret = IEEE80211_STA_DISABLE_VHT; 255 goto out; 256 } 257 258 if (!cfg80211_chandef_valid(&vht_chandef)) { 259 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 260 sdata_info(sdata, 261 "AP VHT information is invalid, disable VHT\n"); 262 ret = IEEE80211_STA_DISABLE_VHT; 263 goto out; 264 } 265 266 if (cfg80211_chandef_identical(chandef, &vht_chandef)) { 267 ret = 0; 268 goto out; 269 } 270 271 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { 272 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 273 sdata_info(sdata, 274 "AP VHT information doesn't match HT, disable VHT\n"); 275 ret = IEEE80211_STA_DISABLE_VHT; 276 goto out; 277 } 278 279 *chandef = vht_chandef; 280 281 ret = 0; 282 283 out: 284 /* 285 * When tracking the current AP, don't do any further checks if the 286 * new chandef is identical to the one we're currently using for the 287 * connection. This keeps us from playing ping-pong with regulatory, 288 * without it the following can happen (for example): 289 * - connect to an AP with 80 MHz, world regdom allows 80 MHz 290 * - AP advertises regdom US 291 * - CRDA loads regdom US with 80 MHz prohibited (old database) 292 * - the code below detects an unsupported channel, downgrades, and 293 * we disconnect from the AP in the caller 294 * - disconnect causes CRDA to reload world regdomain and the game 295 * starts anew. 296 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) 297 * 298 * It seems possible that there are still scenarios with CSA or real 299 * bandwidth changes where a this could happen, but those cases are 300 * less common and wouldn't completely prevent using the AP. 301 */ 302 if (tracking && 303 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) 304 return ret; 305 306 /* don't print the message below for VHT mismatch if VHT is disabled */ 307 if (ret & IEEE80211_STA_DISABLE_VHT) 308 vht_chandef = *chandef; 309 310 /* 311 * Ignore the DISABLED flag when we're already connected and only 312 * tracking the APs beacon for bandwidth changes - otherwise we 313 * might get disconnected here if we connect to an AP, update our 314 * regulatory information based on the AP's country IE and the 315 * information we have is wrong/outdated and disables the channel 316 * that we're actually using for the connection to the AP. 317 */ 318 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, 319 tracking ? 0 : 320 IEEE80211_CHAN_DISABLED)) { 321 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { 322 ret = IEEE80211_STA_DISABLE_HT | 323 IEEE80211_STA_DISABLE_VHT | 324 IEEE80211_STA_DISABLE_HE; 325 break; 326 } 327 328 ret |= ieee80211_chandef_downgrade(chandef); 329 } 330 331 if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, 332 IEEE80211_CHAN_NO_HE)) 333 ret |= IEEE80211_STA_DISABLE_HE; 334 335 if (chandef->width != vht_chandef.width && !tracking) 336 sdata_info(sdata, 337 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); 338 339 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); 340 return ret; 341 } 342 343 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, 344 struct sta_info *sta, 345 const struct ieee80211_ht_cap *ht_cap, 346 const struct ieee80211_vht_cap *vht_cap, 347 const struct ieee80211_ht_operation *ht_oper, 348 const struct ieee80211_vht_operation *vht_oper, 349 const struct ieee80211_he_operation *he_oper, 350 const u8 *bssid, u32 *changed) 351 { 352 struct ieee80211_local *local = sdata->local; 353 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 354 struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan; 355 struct ieee80211_supported_band *sband = 356 local->hw.wiphy->bands[chan->band]; 357 struct cfg80211_chan_def chandef; 358 u16 ht_opmode; 359 u32 flags; 360 enum ieee80211_sta_rx_bandwidth new_sta_bw; 361 u32 vht_cap_info = 0; 362 int ret; 363 364 /* if HT was/is disabled, don't track any bandwidth changes */ 365 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) 366 return 0; 367 368 /* don't check VHT if we associated as non-VHT station */ 369 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) 370 vht_oper = NULL; 371 372 /* don't check HE if we associated as non-HE station */ 373 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE || 374 !ieee80211_get_he_sta_cap(sband)) 375 he_oper = NULL; 376 377 if (WARN_ON_ONCE(!sta)) 378 return -EINVAL; 379 380 /* 381 * if bss configuration changed store the new one - 382 * this may be applicable even if channel is identical 383 */ 384 ht_opmode = le16_to_cpu(ht_oper->operation_mode); 385 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { 386 *changed |= BSS_CHANGED_HT; 387 sdata->vif.bss_conf.ht_operation_mode = ht_opmode; 388 } 389 390 if (vht_cap) 391 vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info); 392 393 /* calculate new channel (type) based on HT/VHT/HE operation IEs */ 394 flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info, 395 ht_oper, vht_oper, he_oper, 396 &chandef, true); 397 398 /* 399 * Downgrade the new channel if we associated with restricted 400 * capabilities. For example, if we associated as a 20 MHz STA 401 * to a 40 MHz AP (due to regulatory, capabilities or config 402 * reasons) then switching to a 40 MHz channel now won't do us 403 * any good -- we couldn't use it with the AP. 404 */ 405 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && 406 chandef.width == NL80211_CHAN_WIDTH_80P80) 407 flags |= ieee80211_chandef_downgrade(&chandef); 408 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && 409 chandef.width == NL80211_CHAN_WIDTH_160) 410 flags |= ieee80211_chandef_downgrade(&chandef); 411 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && 412 chandef.width > NL80211_CHAN_WIDTH_20) 413 flags |= ieee80211_chandef_downgrade(&chandef); 414 415 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) 416 return 0; 417 418 sdata_info(sdata, 419 "AP %pM changed bandwidth, new config is %d.%03d MHz, " 420 "width %d (%d.%03d/%d MHz)\n", 421 ifmgd->bssid, chandef.chan->center_freq, 422 chandef.chan->freq_offset, chandef.width, 423 chandef.center_freq1, chandef.freq1_offset, 424 chandef.center_freq2); 425 426 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | 427 IEEE80211_STA_DISABLE_VHT | 428 IEEE80211_STA_DISABLE_HE | 429 IEEE80211_STA_DISABLE_40MHZ | 430 IEEE80211_STA_DISABLE_80P80MHZ | 431 IEEE80211_STA_DISABLE_160MHZ)) || 432 !cfg80211_chandef_valid(&chandef)) { 433 sdata_info(sdata, 434 "AP %pM changed bandwidth in a way we can't support - disconnect\n", 435 ifmgd->bssid); 436 return -EINVAL; 437 } 438 439 switch (chandef.width) { 440 case NL80211_CHAN_WIDTH_20_NOHT: 441 case NL80211_CHAN_WIDTH_20: 442 new_sta_bw = IEEE80211_STA_RX_BW_20; 443 break; 444 case NL80211_CHAN_WIDTH_40: 445 new_sta_bw = IEEE80211_STA_RX_BW_40; 446 break; 447 case NL80211_CHAN_WIDTH_80: 448 new_sta_bw = IEEE80211_STA_RX_BW_80; 449 break; 450 case NL80211_CHAN_WIDTH_80P80: 451 case NL80211_CHAN_WIDTH_160: 452 new_sta_bw = IEEE80211_STA_RX_BW_160; 453 break; 454 default: 455 return -EINVAL; 456 } 457 458 if (new_sta_bw > sta->cur_max_bandwidth) 459 new_sta_bw = sta->cur_max_bandwidth; 460 461 if (new_sta_bw < sta->sta.bandwidth) { 462 sta->sta.bandwidth = new_sta_bw; 463 rate_control_rate_update(local, sband, sta, 464 IEEE80211_RC_BW_CHANGED); 465 } 466 467 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); 468 if (ret) { 469 sdata_info(sdata, 470 "AP %pM changed bandwidth to incompatible one - disconnect\n", 471 ifmgd->bssid); 472 return ret; 473 } 474 475 if (new_sta_bw > sta->sta.bandwidth) { 476 sta->sta.bandwidth = new_sta_bw; 477 rate_control_rate_update(local, sband, sta, 478 IEEE80211_RC_BW_CHANGED); 479 } 480 481 return 0; 482 } 483 484 /* frame sending functions */ 485 486 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, 487 struct sk_buff *skb, u8 ap_ht_param, 488 struct ieee80211_supported_band *sband, 489 struct ieee80211_channel *channel, 490 enum ieee80211_smps_mode smps) 491 { 492 u8 *pos; 493 u32 flags = channel->flags; 494 u16 cap; 495 struct ieee80211_sta_ht_cap ht_cap; 496 497 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); 498 499 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); 500 ieee80211_apply_htcap_overrides(sdata, &ht_cap); 501 502 /* determine capability flags */ 503 cap = ht_cap.cap; 504 505 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { 506 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: 507 if (flags & IEEE80211_CHAN_NO_HT40PLUS) { 508 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 509 cap &= ~IEEE80211_HT_CAP_SGI_40; 510 } 511 break; 512 case IEEE80211_HT_PARAM_CHA_SEC_BELOW: 513 if (flags & IEEE80211_CHAN_NO_HT40MINUS) { 514 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 515 cap &= ~IEEE80211_HT_CAP_SGI_40; 516 } 517 break; 518 } 519 520 /* 521 * If 40 MHz was disabled associate as though we weren't 522 * capable of 40 MHz -- some broken APs will never fall 523 * back to trying to transmit in 20 MHz. 524 */ 525 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) { 526 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; 527 cap &= ~IEEE80211_HT_CAP_SGI_40; 528 } 529 530 /* set SM PS mode properly */ 531 cap &= ~IEEE80211_HT_CAP_SM_PS; 532 switch (smps) { 533 case IEEE80211_SMPS_AUTOMATIC: 534 case IEEE80211_SMPS_NUM_MODES: 535 WARN_ON(1); 536 /* fall through */ 537 case IEEE80211_SMPS_OFF: 538 cap |= WLAN_HT_CAP_SM_PS_DISABLED << 539 IEEE80211_HT_CAP_SM_PS_SHIFT; 540 break; 541 case IEEE80211_SMPS_STATIC: 542 cap |= WLAN_HT_CAP_SM_PS_STATIC << 543 IEEE80211_HT_CAP_SM_PS_SHIFT; 544 break; 545 case IEEE80211_SMPS_DYNAMIC: 546 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << 547 IEEE80211_HT_CAP_SM_PS_SHIFT; 548 break; 549 } 550 551 /* reserve and fill IE */ 552 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); 553 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); 554 } 555 556 /* This function determines vht capability flags for the association 557 * and builds the IE. 558 * Note - the function may set the owner of the MU-MIMO capability 559 */ 560 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, 561 struct sk_buff *skb, 562 struct ieee80211_supported_band *sband, 563 struct ieee80211_vht_cap *ap_vht_cap) 564 { 565 struct ieee80211_local *local = sdata->local; 566 u8 *pos; 567 u32 cap; 568 struct ieee80211_sta_vht_cap vht_cap; 569 u32 mask, ap_bf_sts, our_bf_sts; 570 571 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); 572 573 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); 574 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); 575 576 /* determine capability flags */ 577 cap = vht_cap.cap; 578 579 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) { 580 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 581 582 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 583 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || 584 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) 585 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; 586 } 587 588 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) { 589 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; 590 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; 591 } 592 593 /* 594 * Some APs apparently get confused if our capabilities are better 595 * than theirs, so restrict what we advertise in the assoc request. 596 */ 597 if (!(ap_vht_cap->vht_cap_info & 598 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) 599 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | 600 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); 601 else if (!(ap_vht_cap->vht_cap_info & 602 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) 603 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; 604 605 /* 606 * If some other vif is using the MU-MIMO capablity we cannot associate 607 * using MU-MIMO - this will lead to contradictions in the group-id 608 * mechanism. 609 * Ownership is defined since association request, in order to avoid 610 * simultaneous associations with MU-MIMO. 611 */ 612 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { 613 bool disable_mu_mimo = false; 614 struct ieee80211_sub_if_data *other; 615 616 list_for_each_entry_rcu(other, &local->interfaces, list) { 617 if (other->vif.mu_mimo_owner) { 618 disable_mu_mimo = true; 619 break; 620 } 621 } 622 if (disable_mu_mimo) 623 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; 624 else 625 sdata->vif.mu_mimo_owner = true; 626 } 627 628 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; 629 630 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; 631 our_bf_sts = cap & mask; 632 633 if (ap_bf_sts < our_bf_sts) { 634 cap &= ~mask; 635 cap |= ap_bf_sts; 636 } 637 638 /* reserve and fill IE */ 639 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); 640 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); 641 } 642 643 /* This function determines HE capability flags for the association 644 * and builds the IE. 645 */ 646 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, 647 struct sk_buff *skb, 648 struct ieee80211_supported_band *sband) 649 { 650 u8 *pos; 651 const struct ieee80211_sta_he_cap *he_cap = NULL; 652 struct ieee80211_chanctx_conf *chanctx_conf; 653 u8 he_cap_size; 654 bool reg_cap = false; 655 656 rcu_read_lock(); 657 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); 658 if (!WARN_ON_ONCE(!chanctx_conf)) 659 reg_cap = cfg80211_chandef_usable(sdata->wdev.wiphy, 660 &chanctx_conf->def, 661 IEEE80211_CHAN_NO_HE); 662 663 rcu_read_unlock(); 664 665 he_cap = ieee80211_get_he_sta_cap(sband); 666 if (!he_cap || !reg_cap) 667 return; 668 669 /* 670 * TODO: the 1 added is because this temporarily is under the EXTENSION 671 * IE. Get rid of it when it moves. 672 */ 673 he_cap_size = 674 2 + 1 + sizeof(he_cap->he_cap_elem) + 675 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) + 676 ieee80211_he_ppe_size(he_cap->ppe_thres[0], 677 he_cap->he_cap_elem.phy_cap_info); 678 pos = skb_put(skb, he_cap_size); 679 ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size); 680 681 ieee80211_ie_build_he_6ghz_cap(sdata, skb); 682 } 683 684 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) 685 { 686 struct ieee80211_local *local = sdata->local; 687 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 688 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 689 struct sk_buff *skb; 690 struct ieee80211_mgmt *mgmt; 691 u8 *pos, qos_info, *ie_start; 692 size_t offset = 0, noffset; 693 int i, count, rates_len, supp_rates_len, shift; 694 u16 capab; 695 struct ieee80211_supported_band *sband; 696 struct ieee80211_chanctx_conf *chanctx_conf; 697 struct ieee80211_channel *chan; 698 u32 rates = 0; 699 struct element *ext_capa = NULL; 700 701 /* we know it's writable, cast away the const */ 702 if (assoc_data->ie_len) 703 ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, 704 assoc_data->ie, 705 assoc_data->ie_len); 706 707 sdata_assert_lock(sdata); 708 709 rcu_read_lock(); 710 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); 711 if (WARN_ON(!chanctx_conf)) { 712 rcu_read_unlock(); 713 return; 714 } 715 chan = chanctx_conf->def.chan; 716 rcu_read_unlock(); 717 sband = local->hw.wiphy->bands[chan->band]; 718 shift = ieee80211_vif_get_shift(&sdata->vif); 719 720 if (assoc_data->supp_rates_len) { 721 /* 722 * Get all rates supported by the device and the AP as 723 * some APs don't like getting a superset of their rates 724 * in the association request (e.g. D-Link DAP 1353 in 725 * b-only mode)... 726 */ 727 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband, 728 assoc_data->supp_rates, 729 assoc_data->supp_rates_len, 730 &rates); 731 } else { 732 /* 733 * In case AP not provide any supported rates information 734 * before association, we send information element(s) with 735 * all rates that we support. 736 */ 737 rates_len = 0; 738 for (i = 0; i < sband->n_bitrates; i++) { 739 rates |= BIT(i); 740 rates_len++; 741 } 742 } 743 744 skb = alloc_skb(local->hw.extra_tx_headroom + 745 sizeof(*mgmt) + /* bit too much but doesn't matter */ 746 2 + assoc_data->ssid_len + /* SSID */ 747 4 + rates_len + /* (extended) rates */ 748 4 + /* power capability */ 749 2 + 2 * sband->n_channels + /* supported channels */ 750 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ 751 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */ 752 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */ 753 sizeof(struct ieee80211_he_mcs_nss_supp) + 754 IEEE80211_HE_PPE_THRES_MAX_LEN + 755 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) + 756 assoc_data->ie_len + /* extra IEs */ 757 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + 758 9, /* WMM */ 759 GFP_KERNEL); 760 if (!skb) 761 return; 762 763 skb_reserve(skb, local->hw.extra_tx_headroom); 764 765 capab = WLAN_CAPABILITY_ESS; 766 767 if (sband->band == NL80211_BAND_2GHZ) { 768 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; 769 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; 770 } 771 772 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY) 773 capab |= WLAN_CAPABILITY_PRIVACY; 774 775 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && 776 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) 777 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; 778 779 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) 780 capab |= WLAN_CAPABILITY_RADIO_MEASURE; 781 782 mgmt = skb_put_zero(skb, 24); 783 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN); 784 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); 785 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN); 786 787 if (!is_zero_ether_addr(assoc_data->prev_bssid)) { 788 skb_put(skb, 10); 789 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | 790 IEEE80211_STYPE_REASSOC_REQ); 791 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); 792 mgmt->u.reassoc_req.listen_interval = 793 cpu_to_le16(local->hw.conf.listen_interval); 794 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid, 795 ETH_ALEN); 796 } else { 797 skb_put(skb, 4); 798 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | 799 IEEE80211_STYPE_ASSOC_REQ); 800 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); 801 mgmt->u.assoc_req.listen_interval = 802 cpu_to_le16(local->hw.conf.listen_interval); 803 } 804 805 /* SSID */ 806 pos = skb_put(skb, 2 + assoc_data->ssid_len); 807 ie_start = pos; 808 *pos++ = WLAN_EID_SSID; 809 *pos++ = assoc_data->ssid_len; 810 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); 811 812 /* add all rates which were marked to be used above */ 813 supp_rates_len = rates_len; 814 if (supp_rates_len > 8) 815 supp_rates_len = 8; 816 817 pos = skb_put(skb, supp_rates_len + 2); 818 *pos++ = WLAN_EID_SUPP_RATES; 819 *pos++ = supp_rates_len; 820 821 count = 0; 822 for (i = 0; i < sband->n_bitrates; i++) { 823 if (BIT(i) & rates) { 824 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 825 5 * (1 << shift)); 826 *pos++ = (u8) rate; 827 if (++count == 8) 828 break; 829 } 830 } 831 832 if (rates_len > count) { 833 pos = skb_put(skb, rates_len - count + 2); 834 *pos++ = WLAN_EID_EXT_SUPP_RATES; 835 *pos++ = rates_len - count; 836 837 for (i++; i < sband->n_bitrates; i++) { 838 if (BIT(i) & rates) { 839 int rate; 840 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 841 5 * (1 << shift)); 842 *pos++ = (u8) rate; 843 } 844 } 845 } 846 847 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT || 848 capab & WLAN_CAPABILITY_RADIO_MEASURE) { 849 pos = skb_put(skb, 4); 850 *pos++ = WLAN_EID_PWR_CAPABILITY; 851 *pos++ = 2; 852 *pos++ = 0; /* min tx power */ 853 /* max tx power */ 854 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def); 855 } 856 857 /* 858 * Per spec, we shouldn't include the list of channels if we advertise 859 * support for extended channel switching, but we've always done that; 860 * (for now?) apply this restriction only on the (new) 6 GHz band. 861 */ 862 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT && 863 (sband->band != NL80211_BAND_6GHZ || 864 !ext_capa || ext_capa->datalen < 1 || 865 !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) { 866 /* TODO: get this in reg domain format */ 867 pos = skb_put(skb, 2 * sband->n_channels + 2); 868 *pos++ = WLAN_EID_SUPPORTED_CHANNELS; 869 *pos++ = 2 * sband->n_channels; 870 for (i = 0; i < sband->n_channels; i++) { 871 *pos++ = ieee80211_frequency_to_channel( 872 sband->channels[i].center_freq); 873 *pos++ = 1; /* one channel in the subband*/ 874 } 875 } 876 877 /* Set MBSSID support for HE AP if needed */ 878 if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && 879 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && assoc_data->ie_len && 880 ext_capa && ext_capa->datalen >= 3) 881 ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; 882 883 /* if present, add any custom IEs that go before HT */ 884 if (assoc_data->ie_len) { 885 static const u8 before_ht[] = { 886 WLAN_EID_SSID, 887 WLAN_EID_SUPP_RATES, 888 WLAN_EID_EXT_SUPP_RATES, 889 WLAN_EID_PWR_CAPABILITY, 890 WLAN_EID_SUPPORTED_CHANNELS, 891 WLAN_EID_RSN, 892 WLAN_EID_QOS_CAPA, 893 WLAN_EID_RRM_ENABLED_CAPABILITIES, 894 WLAN_EID_MOBILITY_DOMAIN, 895 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ 896 WLAN_EID_RIC_DATA, /* reassoc only */ 897 WLAN_EID_SUPPORTED_REGULATORY_CLASSES, 898 }; 899 static const u8 after_ric[] = { 900 WLAN_EID_SUPPORTED_REGULATORY_CLASSES, 901 WLAN_EID_HT_CAPABILITY, 902 WLAN_EID_BSS_COEX_2040, 903 /* luckily this is almost always there */ 904 WLAN_EID_EXT_CAPABILITY, 905 WLAN_EID_QOS_TRAFFIC_CAPA, 906 WLAN_EID_TIM_BCAST_REQ, 907 WLAN_EID_INTERWORKING, 908 /* 60 GHz (Multi-band, DMG, MMS) can't happen */ 909 WLAN_EID_VHT_CAPABILITY, 910 WLAN_EID_OPMODE_NOTIF, 911 }; 912 913 noffset = ieee80211_ie_split_ric(assoc_data->ie, 914 assoc_data->ie_len, 915 before_ht, 916 ARRAY_SIZE(before_ht), 917 after_ric, 918 ARRAY_SIZE(after_ric), 919 offset); 920 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 921 offset = noffset; 922 } 923 924 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 925 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))) 926 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 927 928 if (sband->band != NL80211_BAND_6GHZ && 929 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) 930 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param, 931 sband, chan, sdata->smps_mode); 932 933 /* if present, add any custom IEs that go before VHT */ 934 if (assoc_data->ie_len) { 935 static const u8 before_vht[] = { 936 /* 937 * no need to list the ones split off before HT 938 * or generated here 939 */ 940 WLAN_EID_BSS_COEX_2040, 941 WLAN_EID_EXT_CAPABILITY, 942 WLAN_EID_QOS_TRAFFIC_CAPA, 943 WLAN_EID_TIM_BCAST_REQ, 944 WLAN_EID_INTERWORKING, 945 /* 60 GHz (Multi-band, DMG, MMS) can't happen */ 946 }; 947 948 /* RIC already taken above, so no need to handle here anymore */ 949 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, 950 before_vht, ARRAY_SIZE(before_vht), 951 offset); 952 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 953 offset = noffset; 954 } 955 956 /* if present, add any custom IEs that go before HE */ 957 if (assoc_data->ie_len) { 958 static const u8 before_he[] = { 959 /* 960 * no need to list the ones split off before VHT 961 * or generated here 962 */ 963 WLAN_EID_OPMODE_NOTIF, 964 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE, 965 /* 11ai elements */ 966 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION, 967 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY, 968 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM, 969 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER, 970 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN, 971 /* TODO: add 11ah/11aj/11ak elements */ 972 }; 973 974 /* RIC already taken above, so no need to handle here anymore */ 975 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, 976 before_he, ARRAY_SIZE(before_he), 977 offset); 978 pos = skb_put(skb, noffset - offset); 979 memcpy(pos, assoc_data->ie + offset, noffset - offset); 980 offset = noffset; 981 } 982 983 if (sband->band != NL80211_BAND_6GHZ && 984 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 985 ieee80211_add_vht_ie(sdata, skb, sband, 986 &assoc_data->ap_vht_cap); 987 988 /* 989 * If AP doesn't support HT, mark HE as disabled. 990 * If on the 5GHz band, make sure it supports VHT. 991 */ 992 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || 993 (sband->band == NL80211_BAND_5GHZ && 994 ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 995 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 996 997 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 998 ieee80211_add_he_ie(sdata, skb, sband); 999 1000 /* if present, add any custom non-vendor IEs that go after HE */ 1001 if (assoc_data->ie_len) { 1002 noffset = ieee80211_ie_split_vendor(assoc_data->ie, 1003 assoc_data->ie_len, 1004 offset); 1005 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 1006 offset = noffset; 1007 } 1008 1009 if (assoc_data->wmm) { 1010 if (assoc_data->uapsd) { 1011 qos_info = ifmgd->uapsd_queues; 1012 qos_info |= (ifmgd->uapsd_max_sp_len << 1013 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); 1014 } else { 1015 qos_info = 0; 1016 } 1017 1018 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); 1019 } 1020 1021 /* add any remaining custom (i.e. vendor specific here) IEs */ 1022 if (assoc_data->ie_len) { 1023 noffset = assoc_data->ie_len; 1024 skb_put_data(skb, assoc_data->ie + offset, noffset - offset); 1025 } 1026 1027 if (assoc_data->fils_kek_len && 1028 fils_encrypt_assoc_req(skb, assoc_data) < 0) { 1029 dev_kfree_skb(skb); 1030 return; 1031 } 1032 1033 pos = skb_tail_pointer(skb); 1034 kfree(ifmgd->assoc_req_ies); 1035 ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); 1036 ifmgd->assoc_req_ies_len = pos - ie_start; 1037 1038 drv_mgd_prepare_tx(local, sdata, 0); 1039 1040 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 1041 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 1042 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | 1043 IEEE80211_TX_INTFL_MLME_CONN_TX; 1044 ieee80211_tx_skb(sdata, skb); 1045 } 1046 1047 void ieee80211_send_pspoll(struct ieee80211_local *local, 1048 struct ieee80211_sub_if_data *sdata) 1049 { 1050 struct ieee80211_pspoll *pspoll; 1051 struct sk_buff *skb; 1052 1053 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); 1054 if (!skb) 1055 return; 1056 1057 pspoll = (struct ieee80211_pspoll *) skb->data; 1058 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); 1059 1060 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 1061 ieee80211_tx_skb(sdata, skb); 1062 } 1063 1064 void ieee80211_send_nullfunc(struct ieee80211_local *local, 1065 struct ieee80211_sub_if_data *sdata, 1066 bool powersave) 1067 { 1068 struct sk_buff *skb; 1069 struct ieee80211_hdr_3addr *nullfunc; 1070 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1071 1072 /* Don't send NDPs when STA is connected HE */ 1073 if (sdata->vif.type == NL80211_IFTYPE_STATION && 1074 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 1075 return; 1076 1077 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, 1078 !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP)); 1079 if (!skb) 1080 return; 1081 1082 nullfunc = (struct ieee80211_hdr_3addr *) skb->data; 1083 if (powersave) 1084 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); 1085 1086 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | 1087 IEEE80211_TX_INTFL_OFFCHAN_TX_OK; 1088 1089 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 1090 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; 1091 1092 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) 1093 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; 1094 1095 ieee80211_tx_skb(sdata, skb); 1096 } 1097 1098 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, 1099 struct ieee80211_sub_if_data *sdata) 1100 { 1101 struct sk_buff *skb; 1102 struct ieee80211_hdr *nullfunc; 1103 __le16 fc; 1104 1105 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) 1106 return; 1107 1108 /* Don't send NDPs when connected HE */ 1109 if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE)) 1110 return; 1111 1112 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); 1113 if (!skb) 1114 return; 1115 1116 skb_reserve(skb, local->hw.extra_tx_headroom); 1117 1118 nullfunc = skb_put_zero(skb, 30); 1119 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | 1120 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); 1121 nullfunc->frame_control = fc; 1122 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); 1123 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); 1124 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); 1125 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); 1126 1127 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; 1128 ieee80211_tx_skb(sdata, skb); 1129 } 1130 1131 /* spectrum management related things */ 1132 static void ieee80211_chswitch_work(struct work_struct *work) 1133 { 1134 struct ieee80211_sub_if_data *sdata = 1135 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); 1136 struct ieee80211_local *local = sdata->local; 1137 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1138 int ret; 1139 1140 if (!ieee80211_sdata_running(sdata)) 1141 return; 1142 1143 sdata_lock(sdata); 1144 mutex_lock(&local->mtx); 1145 mutex_lock(&local->chanctx_mtx); 1146 1147 if (!ifmgd->associated) 1148 goto out; 1149 1150 if (!sdata->vif.csa_active) 1151 goto out; 1152 1153 /* 1154 * using reservation isn't immediate as it may be deferred until later 1155 * with multi-vif. once reservation is complete it will re-schedule the 1156 * work with no reserved_chanctx so verify chandef to check if it 1157 * completed successfully 1158 */ 1159 1160 if (sdata->reserved_chanctx) { 1161 struct ieee80211_supported_band *sband = NULL; 1162 struct sta_info *mgd_sta = NULL; 1163 enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20; 1164 1165 /* 1166 * with multi-vif csa driver may call ieee80211_csa_finish() 1167 * many times while waiting for other interfaces to use their 1168 * reservations 1169 */ 1170 if (sdata->reserved_ready) 1171 goto out; 1172 1173 if (sdata->vif.bss_conf.chandef.width != 1174 sdata->csa_chandef.width) { 1175 /* 1176 * For managed interface, we need to also update the AP 1177 * station bandwidth and align the rate scale algorithm 1178 * on the bandwidth change. Here we only consider the 1179 * bandwidth of the new channel definition (as channel 1180 * switch flow does not have the full HT/VHT/HE 1181 * information), assuming that if additional changes are 1182 * required they would be done as part of the processing 1183 * of the next beacon from the AP. 1184 */ 1185 switch (sdata->csa_chandef.width) { 1186 case NL80211_CHAN_WIDTH_20_NOHT: 1187 case NL80211_CHAN_WIDTH_20: 1188 default: 1189 bw = IEEE80211_STA_RX_BW_20; 1190 break; 1191 case NL80211_CHAN_WIDTH_40: 1192 bw = IEEE80211_STA_RX_BW_40; 1193 break; 1194 case NL80211_CHAN_WIDTH_80: 1195 bw = IEEE80211_STA_RX_BW_80; 1196 break; 1197 case NL80211_CHAN_WIDTH_80P80: 1198 case NL80211_CHAN_WIDTH_160: 1199 bw = IEEE80211_STA_RX_BW_160; 1200 break; 1201 } 1202 1203 mgd_sta = sta_info_get(sdata, ifmgd->bssid); 1204 sband = 1205 local->hw.wiphy->bands[sdata->csa_chandef.chan->band]; 1206 } 1207 1208 if (sdata->vif.bss_conf.chandef.width > 1209 sdata->csa_chandef.width) { 1210 mgd_sta->sta.bandwidth = bw; 1211 rate_control_rate_update(local, sband, mgd_sta, 1212 IEEE80211_RC_BW_CHANGED); 1213 } 1214 1215 ret = ieee80211_vif_use_reserved_context(sdata); 1216 if (ret) { 1217 sdata_info(sdata, 1218 "failed to use reserved channel context, disconnecting (err=%d)\n", 1219 ret); 1220 ieee80211_queue_work(&sdata->local->hw, 1221 &ifmgd->csa_connection_drop_work); 1222 goto out; 1223 } 1224 1225 if (sdata->vif.bss_conf.chandef.width < 1226 sdata->csa_chandef.width) { 1227 mgd_sta->sta.bandwidth = bw; 1228 rate_control_rate_update(local, sband, mgd_sta, 1229 IEEE80211_RC_BW_CHANGED); 1230 } 1231 1232 goto out; 1233 } 1234 1235 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, 1236 &sdata->csa_chandef)) { 1237 sdata_info(sdata, 1238 "failed to finalize channel switch, disconnecting\n"); 1239 ieee80211_queue_work(&sdata->local->hw, 1240 &ifmgd->csa_connection_drop_work); 1241 goto out; 1242 } 1243 1244 ifmgd->csa_waiting_bcn = true; 1245 1246 ieee80211_sta_reset_beacon_monitor(sdata); 1247 ieee80211_sta_reset_conn_monitor(sdata); 1248 1249 out: 1250 mutex_unlock(&local->chanctx_mtx); 1251 mutex_unlock(&local->mtx); 1252 sdata_unlock(sdata); 1253 } 1254 1255 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata) 1256 { 1257 struct ieee80211_local *local = sdata->local; 1258 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1259 int ret; 1260 1261 sdata_assert_lock(sdata); 1262 1263 WARN_ON(!sdata->vif.csa_active); 1264 1265 if (sdata->csa_block_tx) { 1266 ieee80211_wake_vif_queues(local, sdata, 1267 IEEE80211_QUEUE_STOP_REASON_CSA); 1268 sdata->csa_block_tx = false; 1269 } 1270 1271 sdata->vif.csa_active = false; 1272 ifmgd->csa_waiting_bcn = false; 1273 1274 ret = drv_post_channel_switch(sdata); 1275 if (ret) { 1276 sdata_info(sdata, 1277 "driver post channel switch failed, disconnecting\n"); 1278 ieee80211_queue_work(&local->hw, 1279 &ifmgd->csa_connection_drop_work); 1280 return; 1281 } 1282 1283 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef); 1284 } 1285 1286 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) 1287 { 1288 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 1289 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1290 1291 trace_api_chswitch_done(sdata, success); 1292 if (!success) { 1293 sdata_info(sdata, 1294 "driver channel switch failed, disconnecting\n"); 1295 ieee80211_queue_work(&sdata->local->hw, 1296 &ifmgd->csa_connection_drop_work); 1297 } else { 1298 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); 1299 } 1300 } 1301 EXPORT_SYMBOL(ieee80211_chswitch_done); 1302 1303 static void ieee80211_chswitch_timer(struct timer_list *t) 1304 { 1305 struct ieee80211_sub_if_data *sdata = 1306 from_timer(sdata, t, u.mgd.chswitch_timer); 1307 1308 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); 1309 } 1310 1311 static void 1312 ieee80211_sta_abort_chanswitch(struct ieee80211_sub_if_data *sdata) 1313 { 1314 struct ieee80211_local *local = sdata->local; 1315 1316 if (!local->ops->abort_channel_switch) 1317 return; 1318 1319 mutex_lock(&local->mtx); 1320 1321 mutex_lock(&local->chanctx_mtx); 1322 ieee80211_vif_unreserve_chanctx(sdata); 1323 mutex_unlock(&local->chanctx_mtx); 1324 1325 if (sdata->csa_block_tx) 1326 ieee80211_wake_vif_queues(local, sdata, 1327 IEEE80211_QUEUE_STOP_REASON_CSA); 1328 1329 sdata->csa_block_tx = false; 1330 sdata->vif.csa_active = false; 1331 1332 mutex_unlock(&local->mtx); 1333 1334 drv_abort_channel_switch(sdata); 1335 } 1336 1337 static void 1338 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, 1339 u64 timestamp, u32 device_timestamp, 1340 struct ieee802_11_elems *elems, 1341 bool beacon) 1342 { 1343 struct ieee80211_local *local = sdata->local; 1344 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1345 struct cfg80211_bss *cbss = ifmgd->associated; 1346 struct ieee80211_chanctx_conf *conf; 1347 struct ieee80211_chanctx *chanctx; 1348 enum nl80211_band current_band; 1349 struct ieee80211_csa_ie csa_ie; 1350 struct ieee80211_channel_switch ch_switch; 1351 struct ieee80211_bss *bss; 1352 int res; 1353 1354 sdata_assert_lock(sdata); 1355 1356 if (!cbss) 1357 return; 1358 1359 if (local->scanning) 1360 return; 1361 1362 current_band = cbss->channel->band; 1363 bss = (void *)cbss->priv; 1364 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, 1365 bss->vht_cap_info, 1366 ifmgd->flags, 1367 ifmgd->associated->bssid, &csa_ie); 1368 1369 if (!res) { 1370 ch_switch.timestamp = timestamp; 1371 ch_switch.device_timestamp = device_timestamp; 1372 ch_switch.block_tx = csa_ie.mode; 1373 ch_switch.chandef = csa_ie.chandef; 1374 ch_switch.count = csa_ie.count; 1375 ch_switch.delay = csa_ie.max_switch_time; 1376 } 1377 1378 if (res < 0) { 1379 ieee80211_queue_work(&local->hw, 1380 &ifmgd->csa_connection_drop_work); 1381 return; 1382 } 1383 1384 if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) { 1385 if (res) 1386 ieee80211_sta_abort_chanswitch(sdata); 1387 else 1388 drv_channel_switch_rx_beacon(sdata, &ch_switch); 1389 return; 1390 } else if (sdata->vif.csa_active || res) { 1391 /* disregard subsequent announcements if already processing */ 1392 return; 1393 } 1394 1395 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, 1396 IEEE80211_CHAN_DISABLED)) { 1397 sdata_info(sdata, 1398 "AP %pM switches to unsupported channel " 1399 "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), " 1400 "disconnecting\n", 1401 ifmgd->associated->bssid, 1402 csa_ie.chandef.chan->center_freq, 1403 csa_ie.chandef.chan->freq_offset, 1404 csa_ie.chandef.width, csa_ie.chandef.center_freq1, 1405 csa_ie.chandef.freq1_offset, 1406 csa_ie.chandef.center_freq2); 1407 ieee80211_queue_work(&local->hw, 1408 &ifmgd->csa_connection_drop_work); 1409 return; 1410 } 1411 1412 if (cfg80211_chandef_identical(&csa_ie.chandef, 1413 &sdata->vif.bss_conf.chandef) && 1414 (!csa_ie.mode || !beacon)) { 1415 if (ifmgd->csa_ignored_same_chan) 1416 return; 1417 sdata_info(sdata, 1418 "AP %pM tries to chanswitch to same channel, ignore\n", 1419 ifmgd->associated->bssid); 1420 ifmgd->csa_ignored_same_chan = true; 1421 return; 1422 } 1423 1424 /* 1425 * Drop all TDLS peers - either we disconnect or move to a different 1426 * channel from this point on. There's no telling what our peer will do. 1427 * The TDLS WIDER_BW scenario is also problematic, as peers might now 1428 * have an incompatible wider chandef. 1429 */ 1430 ieee80211_teardown_tdls_peers(sdata); 1431 1432 mutex_lock(&local->mtx); 1433 mutex_lock(&local->chanctx_mtx); 1434 conf = rcu_dereference_protected(sdata->vif.chanctx_conf, 1435 lockdep_is_held(&local->chanctx_mtx)); 1436 if (!conf) { 1437 sdata_info(sdata, 1438 "no channel context assigned to vif?, disconnecting\n"); 1439 goto drop_connection; 1440 } 1441 1442 chanctx = container_of(conf, struct ieee80211_chanctx, conf); 1443 1444 if (local->use_chanctx && 1445 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { 1446 sdata_info(sdata, 1447 "driver doesn't support chan-switch with channel contexts\n"); 1448 goto drop_connection; 1449 } 1450 1451 if (drv_pre_channel_switch(sdata, &ch_switch)) { 1452 sdata_info(sdata, 1453 "preparing for channel switch failed, disconnecting\n"); 1454 goto drop_connection; 1455 } 1456 1457 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef, 1458 chanctx->mode, false); 1459 if (res) { 1460 sdata_info(sdata, 1461 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", 1462 res); 1463 goto drop_connection; 1464 } 1465 mutex_unlock(&local->chanctx_mtx); 1466 1467 sdata->vif.csa_active = true; 1468 sdata->csa_chandef = csa_ie.chandef; 1469 sdata->csa_block_tx = csa_ie.mode; 1470 ifmgd->csa_ignored_same_chan = false; 1471 1472 if (sdata->csa_block_tx) 1473 ieee80211_stop_vif_queues(local, sdata, 1474 IEEE80211_QUEUE_STOP_REASON_CSA); 1475 mutex_unlock(&local->mtx); 1476 1477 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 1478 csa_ie.count); 1479 1480 if (local->ops->channel_switch) { 1481 /* use driver's channel switch callback */ 1482 drv_channel_switch(local, sdata, &ch_switch); 1483 return; 1484 } 1485 1486 /* channel switch handled in software */ 1487 if (csa_ie.count <= 1) 1488 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work); 1489 else 1490 mod_timer(&ifmgd->chswitch_timer, 1491 TU_TO_EXP_TIME((csa_ie.count - 1) * 1492 cbss->beacon_interval)); 1493 return; 1494 drop_connection: 1495 /* 1496 * This is just so that the disconnect flow will know that 1497 * we were trying to switch channel and failed. In case the 1498 * mode is 1 (we are not allowed to Tx), we will know not to 1499 * send a deauthentication frame. Those two fields will be 1500 * reset when the disconnection worker runs. 1501 */ 1502 sdata->vif.csa_active = true; 1503 sdata->csa_block_tx = csa_ie.mode; 1504 1505 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); 1506 mutex_unlock(&local->chanctx_mtx); 1507 mutex_unlock(&local->mtx); 1508 } 1509 1510 static bool 1511 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, 1512 struct ieee80211_channel *channel, 1513 const u8 *country_ie, u8 country_ie_len, 1514 const u8 *pwr_constr_elem, 1515 int *chan_pwr, int *pwr_reduction) 1516 { 1517 struct ieee80211_country_ie_triplet *triplet; 1518 int chan = ieee80211_frequency_to_channel(channel->center_freq); 1519 int i, chan_increment; 1520 bool have_chan_pwr = false; 1521 1522 /* Invalid IE */ 1523 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) 1524 return false; 1525 1526 triplet = (void *)(country_ie + 3); 1527 country_ie_len -= 3; 1528 1529 switch (channel->band) { 1530 default: 1531 WARN_ON_ONCE(1); 1532 /* fall through */ 1533 case NL80211_BAND_2GHZ: 1534 case NL80211_BAND_60GHZ: 1535 chan_increment = 1; 1536 break; 1537 case NL80211_BAND_5GHZ: 1538 case NL80211_BAND_6GHZ: 1539 chan_increment = 4; 1540 break; 1541 } 1542 1543 /* find channel */ 1544 while (country_ie_len >= 3) { 1545 u8 first_channel = triplet->chans.first_channel; 1546 1547 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) 1548 goto next; 1549 1550 for (i = 0; i < triplet->chans.num_channels; i++) { 1551 if (first_channel + i * chan_increment == chan) { 1552 have_chan_pwr = true; 1553 *chan_pwr = triplet->chans.max_power; 1554 break; 1555 } 1556 } 1557 if (have_chan_pwr) 1558 break; 1559 1560 next: 1561 triplet++; 1562 country_ie_len -= 3; 1563 } 1564 1565 if (have_chan_pwr && pwr_constr_elem) 1566 *pwr_reduction = *pwr_constr_elem; 1567 else 1568 *pwr_reduction = 0; 1569 1570 return have_chan_pwr; 1571 } 1572 1573 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, 1574 struct ieee80211_channel *channel, 1575 const u8 *cisco_dtpc_ie, 1576 int *pwr_level) 1577 { 1578 /* From practical testing, the first data byte of the DTPC element 1579 * seems to contain the requested dBm level, and the CLI on Cisco 1580 * APs clearly state the range is -127 to 127 dBm, which indicates 1581 * a signed byte, although it seemingly never actually goes negative. 1582 * The other byte seems to always be zero. 1583 */ 1584 *pwr_level = (__s8)cisco_dtpc_ie[4]; 1585 } 1586 1587 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, 1588 struct ieee80211_channel *channel, 1589 struct ieee80211_mgmt *mgmt, 1590 const u8 *country_ie, u8 country_ie_len, 1591 const u8 *pwr_constr_ie, 1592 const u8 *cisco_dtpc_ie) 1593 { 1594 bool has_80211h_pwr = false, has_cisco_pwr = false; 1595 int chan_pwr = 0, pwr_reduction_80211h = 0; 1596 int pwr_level_cisco, pwr_level_80211h; 1597 int new_ap_level; 1598 __le16 capab = mgmt->u.probe_resp.capab_info; 1599 1600 if (country_ie && 1601 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || 1602 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { 1603 has_80211h_pwr = ieee80211_find_80211h_pwr_constr( 1604 sdata, channel, country_ie, country_ie_len, 1605 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); 1606 pwr_level_80211h = 1607 max_t(int, 0, chan_pwr - pwr_reduction_80211h); 1608 } 1609 1610 if (cisco_dtpc_ie) { 1611 ieee80211_find_cisco_dtpc( 1612 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); 1613 has_cisco_pwr = true; 1614 } 1615 1616 if (!has_80211h_pwr && !has_cisco_pwr) 1617 return 0; 1618 1619 /* If we have both 802.11h and Cisco DTPC, apply both limits 1620 * by picking the smallest of the two power levels advertised. 1621 */ 1622 if (has_80211h_pwr && 1623 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { 1624 new_ap_level = pwr_level_80211h; 1625 1626 if (sdata->ap_power_level == new_ap_level) 1627 return 0; 1628 1629 sdata_dbg(sdata, 1630 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", 1631 pwr_level_80211h, chan_pwr, pwr_reduction_80211h, 1632 sdata->u.mgd.bssid); 1633 } else { /* has_cisco_pwr is always true here. */ 1634 new_ap_level = pwr_level_cisco; 1635 1636 if (sdata->ap_power_level == new_ap_level) 1637 return 0; 1638 1639 sdata_dbg(sdata, 1640 "Limiting TX power to %d dBm as advertised by %pM\n", 1641 pwr_level_cisco, sdata->u.mgd.bssid); 1642 } 1643 1644 sdata->ap_power_level = new_ap_level; 1645 if (__ieee80211_recalc_txpower(sdata)) 1646 return BSS_CHANGED_TXPOWER; 1647 return 0; 1648 } 1649 1650 /* powersave */ 1651 static void ieee80211_enable_ps(struct ieee80211_local *local, 1652 struct ieee80211_sub_if_data *sdata) 1653 { 1654 struct ieee80211_conf *conf = &local->hw.conf; 1655 1656 /* 1657 * If we are scanning right now then the parameters will 1658 * take effect when scan finishes. 1659 */ 1660 if (local->scanning) 1661 return; 1662 1663 if (conf->dynamic_ps_timeout > 0 && 1664 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { 1665 mod_timer(&local->dynamic_ps_timer, jiffies + 1666 msecs_to_jiffies(conf->dynamic_ps_timeout)); 1667 } else { 1668 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) 1669 ieee80211_send_nullfunc(local, sdata, true); 1670 1671 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 1672 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 1673 return; 1674 1675 conf->flags |= IEEE80211_CONF_PS; 1676 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1677 } 1678 } 1679 1680 static void ieee80211_change_ps(struct ieee80211_local *local) 1681 { 1682 struct ieee80211_conf *conf = &local->hw.conf; 1683 1684 if (local->ps_sdata) { 1685 ieee80211_enable_ps(local, local->ps_sdata); 1686 } else if (conf->flags & IEEE80211_CONF_PS) { 1687 conf->flags &= ~IEEE80211_CONF_PS; 1688 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1689 del_timer_sync(&local->dynamic_ps_timer); 1690 cancel_work_sync(&local->dynamic_ps_enable_work); 1691 } 1692 } 1693 1694 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) 1695 { 1696 struct ieee80211_if_managed *mgd = &sdata->u.mgd; 1697 struct sta_info *sta = NULL; 1698 bool authorized = false; 1699 1700 if (!mgd->powersave) 1701 return false; 1702 1703 if (mgd->broken_ap) 1704 return false; 1705 1706 if (!mgd->associated) 1707 return false; 1708 1709 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) 1710 return false; 1711 1712 if (!mgd->have_beacon) 1713 return false; 1714 1715 rcu_read_lock(); 1716 sta = sta_info_get(sdata, mgd->bssid); 1717 if (sta) 1718 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); 1719 rcu_read_unlock(); 1720 1721 return authorized; 1722 } 1723 1724 /* need to hold RTNL or interface lock */ 1725 void ieee80211_recalc_ps(struct ieee80211_local *local) 1726 { 1727 struct ieee80211_sub_if_data *sdata, *found = NULL; 1728 int count = 0; 1729 int timeout; 1730 1731 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) { 1732 local->ps_sdata = NULL; 1733 return; 1734 } 1735 1736 list_for_each_entry(sdata, &local->interfaces, list) { 1737 if (!ieee80211_sdata_running(sdata)) 1738 continue; 1739 if (sdata->vif.type == NL80211_IFTYPE_AP) { 1740 /* If an AP vif is found, then disable PS 1741 * by setting the count to zero thereby setting 1742 * ps_sdata to NULL. 1743 */ 1744 count = 0; 1745 break; 1746 } 1747 if (sdata->vif.type != NL80211_IFTYPE_STATION) 1748 continue; 1749 found = sdata; 1750 count++; 1751 } 1752 1753 if (count == 1 && ieee80211_powersave_allowed(found)) { 1754 u8 dtimper = found->u.mgd.dtim_period; 1755 1756 timeout = local->dynamic_ps_forced_timeout; 1757 if (timeout < 0) 1758 timeout = 100; 1759 local->hw.conf.dynamic_ps_timeout = timeout; 1760 1761 /* If the TIM IE is invalid, pretend the value is 1 */ 1762 if (!dtimper) 1763 dtimper = 1; 1764 1765 local->hw.conf.ps_dtim_period = dtimper; 1766 local->ps_sdata = found; 1767 } else { 1768 local->ps_sdata = NULL; 1769 } 1770 1771 ieee80211_change_ps(local); 1772 } 1773 1774 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) 1775 { 1776 bool ps_allowed = ieee80211_powersave_allowed(sdata); 1777 1778 if (sdata->vif.bss_conf.ps != ps_allowed) { 1779 sdata->vif.bss_conf.ps = ps_allowed; 1780 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS); 1781 } 1782 } 1783 1784 void ieee80211_dynamic_ps_disable_work(struct work_struct *work) 1785 { 1786 struct ieee80211_local *local = 1787 container_of(work, struct ieee80211_local, 1788 dynamic_ps_disable_work); 1789 1790 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 1791 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 1792 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1793 } 1794 1795 ieee80211_wake_queues_by_reason(&local->hw, 1796 IEEE80211_MAX_QUEUE_MAP, 1797 IEEE80211_QUEUE_STOP_REASON_PS, 1798 false); 1799 } 1800 1801 void ieee80211_dynamic_ps_enable_work(struct work_struct *work) 1802 { 1803 struct ieee80211_local *local = 1804 container_of(work, struct ieee80211_local, 1805 dynamic_ps_enable_work); 1806 struct ieee80211_sub_if_data *sdata = local->ps_sdata; 1807 struct ieee80211_if_managed *ifmgd; 1808 unsigned long flags; 1809 int q; 1810 1811 /* can only happen when PS was just disabled anyway */ 1812 if (!sdata) 1813 return; 1814 1815 ifmgd = &sdata->u.mgd; 1816 1817 if (local->hw.conf.flags & IEEE80211_CONF_PS) 1818 return; 1819 1820 if (local->hw.conf.dynamic_ps_timeout > 0) { 1821 /* don't enter PS if TX frames are pending */ 1822 if (drv_tx_frames_pending(local)) { 1823 mod_timer(&local->dynamic_ps_timer, jiffies + 1824 msecs_to_jiffies( 1825 local->hw.conf.dynamic_ps_timeout)); 1826 return; 1827 } 1828 1829 /* 1830 * transmission can be stopped by others which leads to 1831 * dynamic_ps_timer expiry. Postpone the ps timer if it 1832 * is not the actual idle state. 1833 */ 1834 spin_lock_irqsave(&local->queue_stop_reason_lock, flags); 1835 for (q = 0; q < local->hw.queues; q++) { 1836 if (local->queue_stop_reasons[q]) { 1837 spin_unlock_irqrestore(&local->queue_stop_reason_lock, 1838 flags); 1839 mod_timer(&local->dynamic_ps_timer, jiffies + 1840 msecs_to_jiffies( 1841 local->hw.conf.dynamic_ps_timeout)); 1842 return; 1843 } 1844 } 1845 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); 1846 } 1847 1848 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 1849 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { 1850 if (drv_tx_frames_pending(local)) { 1851 mod_timer(&local->dynamic_ps_timer, jiffies + 1852 msecs_to_jiffies( 1853 local->hw.conf.dynamic_ps_timeout)); 1854 } else { 1855 ieee80211_send_nullfunc(local, sdata, true); 1856 /* Flush to get the tx status of nullfunc frame */ 1857 ieee80211_flush_queues(local, sdata, false); 1858 } 1859 } 1860 1861 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && 1862 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || 1863 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { 1864 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; 1865 local->hw.conf.flags |= IEEE80211_CONF_PS; 1866 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 1867 } 1868 } 1869 1870 void ieee80211_dynamic_ps_timer(struct timer_list *t) 1871 { 1872 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer); 1873 1874 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); 1875 } 1876 1877 void ieee80211_dfs_cac_timer_work(struct work_struct *work) 1878 { 1879 struct delayed_work *delayed_work = to_delayed_work(work); 1880 struct ieee80211_sub_if_data *sdata = 1881 container_of(delayed_work, struct ieee80211_sub_if_data, 1882 dfs_cac_timer_work); 1883 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef; 1884 1885 mutex_lock(&sdata->local->mtx); 1886 if (sdata->wdev.cac_started) { 1887 ieee80211_vif_release_channel(sdata); 1888 cfg80211_cac_event(sdata->dev, &chandef, 1889 NL80211_RADAR_CAC_FINISHED, 1890 GFP_KERNEL); 1891 } 1892 mutex_unlock(&sdata->local->mtx); 1893 } 1894 1895 static bool 1896 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) 1897 { 1898 struct ieee80211_local *local = sdata->local; 1899 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1900 bool ret = false; 1901 int ac; 1902 1903 if (local->hw.queues < IEEE80211_NUM_ACS) 1904 return false; 1905 1906 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { 1907 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; 1908 int non_acm_ac; 1909 unsigned long now = jiffies; 1910 1911 if (tx_tspec->action == TX_TSPEC_ACTION_NONE && 1912 tx_tspec->admitted_time && 1913 time_after(now, tx_tspec->time_slice_start + HZ)) { 1914 tx_tspec->consumed_tx_time = 0; 1915 tx_tspec->time_slice_start = now; 1916 1917 if (tx_tspec->downgraded) 1918 tx_tspec->action = 1919 TX_TSPEC_ACTION_STOP_DOWNGRADE; 1920 } 1921 1922 switch (tx_tspec->action) { 1923 case TX_TSPEC_ACTION_STOP_DOWNGRADE: 1924 /* take the original parameters */ 1925 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac])) 1926 sdata_err(sdata, 1927 "failed to set TX queue parameters for queue %d\n", 1928 ac); 1929 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1930 tx_tspec->downgraded = false; 1931 ret = true; 1932 break; 1933 case TX_TSPEC_ACTION_DOWNGRADE: 1934 if (time_after(now, tx_tspec->time_slice_start + HZ)) { 1935 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1936 ret = true; 1937 break; 1938 } 1939 /* downgrade next lower non-ACM AC */ 1940 for (non_acm_ac = ac + 1; 1941 non_acm_ac < IEEE80211_NUM_ACS; 1942 non_acm_ac++) 1943 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) 1944 break; 1945 /* Usually the loop will result in using BK even if it 1946 * requires admission control, but such a configuration 1947 * makes no sense and we have to transmit somehow - the 1948 * AC selection does the same thing. 1949 * If we started out trying to downgrade from BK, then 1950 * the extra condition here might be needed. 1951 */ 1952 if (non_acm_ac >= IEEE80211_NUM_ACS) 1953 non_acm_ac = IEEE80211_AC_BK; 1954 if (drv_conf_tx(local, sdata, ac, 1955 &sdata->tx_conf[non_acm_ac])) 1956 sdata_err(sdata, 1957 "failed to set TX queue parameters for queue %d\n", 1958 ac); 1959 tx_tspec->action = TX_TSPEC_ACTION_NONE; 1960 ret = true; 1961 schedule_delayed_work(&ifmgd->tx_tspec_wk, 1962 tx_tspec->time_slice_start + HZ - now + 1); 1963 break; 1964 case TX_TSPEC_ACTION_NONE: 1965 /* nothing now */ 1966 break; 1967 } 1968 } 1969 1970 return ret; 1971 } 1972 1973 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) 1974 { 1975 if (__ieee80211_sta_handle_tspec_ac_params(sdata)) 1976 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); 1977 } 1978 1979 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work) 1980 { 1981 struct ieee80211_sub_if_data *sdata; 1982 1983 sdata = container_of(work, struct ieee80211_sub_if_data, 1984 u.mgd.tx_tspec_wk.work); 1985 ieee80211_sta_handle_tspec_ac_params(sdata); 1986 } 1987 1988 /* MLME */ 1989 static bool 1990 ieee80211_sta_wmm_params(struct ieee80211_local *local, 1991 struct ieee80211_sub_if_data *sdata, 1992 const u8 *wmm_param, size_t wmm_param_len, 1993 const struct ieee80211_mu_edca_param_set *mu_edca) 1994 { 1995 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; 1996 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 1997 size_t left; 1998 int count, mu_edca_count, ac; 1999 const u8 *pos; 2000 u8 uapsd_queues = 0; 2001 2002 if (!local->ops->conf_tx) 2003 return false; 2004 2005 if (local->hw.queues < IEEE80211_NUM_ACS) 2006 return false; 2007 2008 if (!wmm_param) 2009 return false; 2010 2011 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) 2012 return false; 2013 2014 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) 2015 uapsd_queues = ifmgd->uapsd_queues; 2016 2017 count = wmm_param[6] & 0x0f; 2018 /* -1 is the initial value of ifmgd->mu_edca_last_param_set. 2019 * if mu_edca was preset before and now it disappeared tell 2020 * the driver about it. 2021 */ 2022 mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1; 2023 if (count == ifmgd->wmm_last_param_set && 2024 mu_edca_count == ifmgd->mu_edca_last_param_set) 2025 return false; 2026 ifmgd->wmm_last_param_set = count; 2027 ifmgd->mu_edca_last_param_set = mu_edca_count; 2028 2029 pos = wmm_param + 8; 2030 left = wmm_param_len - 8; 2031 2032 memset(¶ms, 0, sizeof(params)); 2033 2034 sdata->wmm_acm = 0; 2035 for (; left >= 4; left -= 4, pos += 4) { 2036 int aci = (pos[0] >> 5) & 0x03; 2037 int acm = (pos[0] >> 4) & 0x01; 2038 bool uapsd = false; 2039 2040 switch (aci) { 2041 case 1: /* AC_BK */ 2042 ac = IEEE80211_AC_BK; 2043 if (acm) 2044 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ 2045 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) 2046 uapsd = true; 2047 params[ac].mu_edca = !!mu_edca; 2048 if (mu_edca) 2049 params[ac].mu_edca_param_rec = mu_edca->ac_bk; 2050 break; 2051 case 2: /* AC_VI */ 2052 ac = IEEE80211_AC_VI; 2053 if (acm) 2054 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ 2055 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) 2056 uapsd = true; 2057 params[ac].mu_edca = !!mu_edca; 2058 if (mu_edca) 2059 params[ac].mu_edca_param_rec = mu_edca->ac_vi; 2060 break; 2061 case 3: /* AC_VO */ 2062 ac = IEEE80211_AC_VO; 2063 if (acm) 2064 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ 2065 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) 2066 uapsd = true; 2067 params[ac].mu_edca = !!mu_edca; 2068 if (mu_edca) 2069 params[ac].mu_edca_param_rec = mu_edca->ac_vo; 2070 break; 2071 case 0: /* AC_BE */ 2072 default: 2073 ac = IEEE80211_AC_BE; 2074 if (acm) 2075 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ 2076 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) 2077 uapsd = true; 2078 params[ac].mu_edca = !!mu_edca; 2079 if (mu_edca) 2080 params[ac].mu_edca_param_rec = mu_edca->ac_be; 2081 break; 2082 } 2083 2084 params[ac].aifs = pos[0] & 0x0f; 2085 2086 if (params[ac].aifs < 2) { 2087 sdata_info(sdata, 2088 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", 2089 params[ac].aifs, aci); 2090 params[ac].aifs = 2; 2091 } 2092 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); 2093 params[ac].cw_min = ecw2cw(pos[1] & 0x0f); 2094 params[ac].txop = get_unaligned_le16(pos + 2); 2095 params[ac].acm = acm; 2096 params[ac].uapsd = uapsd; 2097 2098 if (params[ac].cw_min == 0 || 2099 params[ac].cw_min > params[ac].cw_max) { 2100 sdata_info(sdata, 2101 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", 2102 params[ac].cw_min, params[ac].cw_max, aci); 2103 return false; 2104 } 2105 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); 2106 } 2107 2108 /* WMM specification requires all 4 ACIs. */ 2109 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { 2110 if (params[ac].cw_min == 0) { 2111 sdata_info(sdata, 2112 "AP has invalid WMM params (missing AC %d), using defaults\n", 2113 ac); 2114 return false; 2115 } 2116 } 2117 2118 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { 2119 mlme_dbg(sdata, 2120 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", 2121 ac, params[ac].acm, 2122 params[ac].aifs, params[ac].cw_min, params[ac].cw_max, 2123 params[ac].txop, params[ac].uapsd, 2124 ifmgd->tx_tspec[ac].downgraded); 2125 sdata->tx_conf[ac] = params[ac]; 2126 if (!ifmgd->tx_tspec[ac].downgraded && 2127 drv_conf_tx(local, sdata, ac, ¶ms[ac])) 2128 sdata_err(sdata, 2129 "failed to set TX queue parameters for AC %d\n", 2130 ac); 2131 } 2132 2133 /* enable WMM or activate new settings */ 2134 sdata->vif.bss_conf.qos = true; 2135 return true; 2136 } 2137 2138 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) 2139 { 2140 lockdep_assert_held(&sdata->local->mtx); 2141 2142 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; 2143 ieee80211_run_deferred_scan(sdata->local); 2144 } 2145 2146 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) 2147 { 2148 mutex_lock(&sdata->local->mtx); 2149 __ieee80211_stop_poll(sdata); 2150 mutex_unlock(&sdata->local->mtx); 2151 } 2152 2153 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, 2154 u16 capab, bool erp_valid, u8 erp) 2155 { 2156 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 2157 struct ieee80211_supported_band *sband; 2158 u32 changed = 0; 2159 bool use_protection; 2160 bool use_short_preamble; 2161 bool use_short_slot; 2162 2163 sband = ieee80211_get_sband(sdata); 2164 if (!sband) 2165 return changed; 2166 2167 if (erp_valid) { 2168 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; 2169 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; 2170 } else { 2171 use_protection = false; 2172 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); 2173 } 2174 2175 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); 2176 if (sband->band == NL80211_BAND_5GHZ || 2177 sband->band == NL80211_BAND_6GHZ) 2178 use_short_slot = true; 2179 2180 if (use_protection != bss_conf->use_cts_prot) { 2181 bss_conf->use_cts_prot = use_protection; 2182 changed |= BSS_CHANGED_ERP_CTS_PROT; 2183 } 2184 2185 if (use_short_preamble != bss_conf->use_short_preamble) { 2186 bss_conf->use_short_preamble = use_short_preamble; 2187 changed |= BSS_CHANGED_ERP_PREAMBLE; 2188 } 2189 2190 if (use_short_slot != bss_conf->use_short_slot) { 2191 bss_conf->use_short_slot = use_short_slot; 2192 changed |= BSS_CHANGED_ERP_SLOT; 2193 } 2194 2195 return changed; 2196 } 2197 2198 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, 2199 struct cfg80211_bss *cbss, 2200 u32 bss_info_changed) 2201 { 2202 struct ieee80211_bss *bss = (void *)cbss->priv; 2203 struct ieee80211_local *local = sdata->local; 2204 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 2205 2206 bss_info_changed |= BSS_CHANGED_ASSOC; 2207 bss_info_changed |= ieee80211_handle_bss_capability(sdata, 2208 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value); 2209 2210 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( 2211 beacon_loss_count * bss_conf->beacon_int)); 2212 2213 sdata->u.mgd.associated = cbss; 2214 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); 2215 2216 ieee80211_check_rate_mask(sdata); 2217 2218 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; 2219 2220 if (sdata->vif.p2p || 2221 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { 2222 const struct cfg80211_bss_ies *ies; 2223 2224 rcu_read_lock(); 2225 ies = rcu_dereference(cbss->ies); 2226 if (ies) { 2227 int ret; 2228 2229 ret = cfg80211_get_p2p_attr( 2230 ies->data, ies->len, 2231 IEEE80211_P2P_ATTR_ABSENCE_NOTICE, 2232 (u8 *) &bss_conf->p2p_noa_attr, 2233 sizeof(bss_conf->p2p_noa_attr)); 2234 if (ret >= 2) { 2235 sdata->u.mgd.p2p_noa_index = 2236 bss_conf->p2p_noa_attr.index; 2237 bss_info_changed |= BSS_CHANGED_P2P_PS; 2238 } 2239 } 2240 rcu_read_unlock(); 2241 } 2242 2243 /* just to be sure */ 2244 ieee80211_stop_poll(sdata); 2245 2246 ieee80211_led_assoc(local, 1); 2247 2248 if (sdata->u.mgd.have_beacon) { 2249 /* 2250 * If the AP is buggy we may get here with no DTIM period 2251 * known, so assume it's 1 which is the only safe assumption 2252 * in that case, although if the TIM IE is broken powersave 2253 * probably just won't work at all. 2254 */ 2255 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; 2256 bss_conf->beacon_rate = bss->beacon_rate; 2257 bss_info_changed |= BSS_CHANGED_BEACON_INFO; 2258 } else { 2259 bss_conf->beacon_rate = NULL; 2260 bss_conf->dtim_period = 0; 2261 } 2262 2263 bss_conf->assoc = 1; 2264 2265 /* Tell the driver to monitor connection quality (if supported) */ 2266 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && 2267 bss_conf->cqm_rssi_thold) 2268 bss_info_changed |= BSS_CHANGED_CQM; 2269 2270 /* Enable ARP filtering */ 2271 if (bss_conf->arp_addr_cnt) 2272 bss_info_changed |= BSS_CHANGED_ARP_FILTER; 2273 2274 ieee80211_bss_info_change_notify(sdata, bss_info_changed); 2275 2276 mutex_lock(&local->iflist_mtx); 2277 ieee80211_recalc_ps(local); 2278 mutex_unlock(&local->iflist_mtx); 2279 2280 ieee80211_recalc_smps(sdata); 2281 ieee80211_recalc_ps_vif(sdata); 2282 2283 netif_carrier_on(sdata->dev); 2284 } 2285 2286 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, 2287 u16 stype, u16 reason, bool tx, 2288 u8 *frame_buf) 2289 { 2290 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2291 struct ieee80211_local *local = sdata->local; 2292 u32 changed = 0; 2293 2294 sdata_assert_lock(sdata); 2295 2296 if (WARN_ON_ONCE(tx && !frame_buf)) 2297 return; 2298 2299 if (WARN_ON(!ifmgd->associated)) 2300 return; 2301 2302 ieee80211_stop_poll(sdata); 2303 2304 ifmgd->associated = NULL; 2305 netif_carrier_off(sdata->dev); 2306 2307 /* 2308 * if we want to get out of ps before disassoc (why?) we have 2309 * to do it before sending disassoc, as otherwise the null-packet 2310 * won't be valid. 2311 */ 2312 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 2313 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 2314 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); 2315 } 2316 local->ps_sdata = NULL; 2317 2318 /* disable per-vif ps */ 2319 ieee80211_recalc_ps_vif(sdata); 2320 2321 /* make sure ongoing transmission finishes */ 2322 synchronize_net(); 2323 2324 /* 2325 * drop any frame before deauth/disassoc, this can be data or 2326 * management frame. Since we are disconnecting, we should not 2327 * insist sending these frames which can take time and delay 2328 * the disconnection and possible the roaming. 2329 */ 2330 if (tx) 2331 ieee80211_flush_queues(local, sdata, true); 2332 2333 /* deauthenticate/disassociate now */ 2334 if (tx || frame_buf) { 2335 /* 2336 * In multi channel scenarios guarantee that the virtual 2337 * interface is granted immediate airtime to transmit the 2338 * deauthentication frame by calling mgd_prepare_tx, if the 2339 * driver requested so. 2340 */ 2341 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) && 2342 !ifmgd->have_beacon) 2343 drv_mgd_prepare_tx(sdata->local, sdata, 0); 2344 2345 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, 2346 ifmgd->bssid, stype, reason, 2347 tx, frame_buf); 2348 } 2349 2350 /* flush out frame - make sure the deauth was actually sent */ 2351 if (tx) 2352 ieee80211_flush_queues(local, sdata, false); 2353 2354 /* clear bssid only after building the needed mgmt frames */ 2355 eth_zero_addr(ifmgd->bssid); 2356 2357 /* remove AP and TDLS peers */ 2358 sta_info_flush(sdata); 2359 2360 /* finally reset all BSS / config parameters */ 2361 changed |= ieee80211_reset_erp_info(sdata); 2362 2363 ieee80211_led_assoc(local, 0); 2364 changed |= BSS_CHANGED_ASSOC; 2365 sdata->vif.bss_conf.assoc = false; 2366 2367 ifmgd->p2p_noa_index = -1; 2368 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, 2369 sizeof(sdata->vif.bss_conf.p2p_noa_attr)); 2370 2371 /* on the next assoc, re-program HT/VHT parameters */ 2372 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); 2373 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); 2374 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); 2375 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); 2376 2377 /* reset MU-MIMO ownership and group data */ 2378 memset(sdata->vif.bss_conf.mu_group.membership, 0, 2379 sizeof(sdata->vif.bss_conf.mu_group.membership)); 2380 memset(sdata->vif.bss_conf.mu_group.position, 0, 2381 sizeof(sdata->vif.bss_conf.mu_group.position)); 2382 changed |= BSS_CHANGED_MU_GROUPS; 2383 sdata->vif.mu_mimo_owner = false; 2384 2385 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL; 2386 2387 del_timer_sync(&local->dynamic_ps_timer); 2388 cancel_work_sync(&local->dynamic_ps_enable_work); 2389 2390 /* Disable ARP filtering */ 2391 if (sdata->vif.bss_conf.arp_addr_cnt) 2392 changed |= BSS_CHANGED_ARP_FILTER; 2393 2394 sdata->vif.bss_conf.qos = false; 2395 changed |= BSS_CHANGED_QOS; 2396 2397 /* The BSSID (not really interesting) and HT changed */ 2398 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; 2399 ieee80211_bss_info_change_notify(sdata, changed); 2400 2401 /* disassociated - set to defaults now */ 2402 ieee80211_set_wmm_default(sdata, false, false); 2403 2404 del_timer_sync(&sdata->u.mgd.conn_mon_timer); 2405 del_timer_sync(&sdata->u.mgd.bcn_mon_timer); 2406 del_timer_sync(&sdata->u.mgd.timer); 2407 del_timer_sync(&sdata->u.mgd.chswitch_timer); 2408 2409 sdata->vif.bss_conf.dtim_period = 0; 2410 sdata->vif.bss_conf.beacon_rate = NULL; 2411 2412 ifmgd->have_beacon = false; 2413 2414 ifmgd->flags = 0; 2415 mutex_lock(&local->mtx); 2416 ieee80211_vif_release_channel(sdata); 2417 2418 sdata->vif.csa_active = false; 2419 ifmgd->csa_waiting_bcn = false; 2420 ifmgd->csa_ignored_same_chan = false; 2421 if (sdata->csa_block_tx) { 2422 ieee80211_wake_vif_queues(local, sdata, 2423 IEEE80211_QUEUE_STOP_REASON_CSA); 2424 sdata->csa_block_tx = false; 2425 } 2426 mutex_unlock(&local->mtx); 2427 2428 /* existing TX TSPEC sessions no longer exist */ 2429 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); 2430 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); 2431 2432 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; 2433 } 2434 2435 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, 2436 struct ieee80211_hdr *hdr) 2437 { 2438 /* 2439 * We can postpone the mgd.timer whenever receiving unicast frames 2440 * from AP because we know that the connection is working both ways 2441 * at that time. But multicast frames (and hence also beacons) must 2442 * be ignored here, because we need to trigger the timer during 2443 * data idle periods for sending the periodic probe request to the 2444 * AP we're connected to. 2445 */ 2446 if (is_multicast_ether_addr(hdr->addr1)) 2447 return; 2448 2449 ieee80211_sta_reset_conn_monitor(sdata); 2450 } 2451 2452 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) 2453 { 2454 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2455 struct ieee80211_local *local = sdata->local; 2456 2457 mutex_lock(&local->mtx); 2458 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) 2459 goto out; 2460 2461 __ieee80211_stop_poll(sdata); 2462 2463 mutex_lock(&local->iflist_mtx); 2464 ieee80211_recalc_ps(local); 2465 mutex_unlock(&local->iflist_mtx); 2466 2467 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 2468 goto out; 2469 2470 /* 2471 * We've received a probe response, but are not sure whether 2472 * we have or will be receiving any beacons or data, so let's 2473 * schedule the timers again, just in case. 2474 */ 2475 ieee80211_sta_reset_beacon_monitor(sdata); 2476 2477 mod_timer(&ifmgd->conn_mon_timer, 2478 round_jiffies_up(jiffies + 2479 IEEE80211_CONNECTION_IDLE_TIME)); 2480 out: 2481 mutex_unlock(&local->mtx); 2482 } 2483 2484 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, 2485 struct ieee80211_hdr *hdr, 2486 u16 tx_time) 2487 { 2488 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2489 u16 tid = ieee80211_get_tid(hdr); 2490 int ac = ieee80211_ac_from_tid(tid); 2491 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; 2492 unsigned long now = jiffies; 2493 2494 if (likely(!tx_tspec->admitted_time)) 2495 return; 2496 2497 if (time_after(now, tx_tspec->time_slice_start + HZ)) { 2498 tx_tspec->consumed_tx_time = 0; 2499 tx_tspec->time_slice_start = now; 2500 2501 if (tx_tspec->downgraded) { 2502 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; 2503 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); 2504 } 2505 } 2506 2507 if (tx_tspec->downgraded) 2508 return; 2509 2510 tx_tspec->consumed_tx_time += tx_time; 2511 2512 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { 2513 tx_tspec->downgraded = true; 2514 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; 2515 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); 2516 } 2517 } 2518 2519 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, 2520 struct ieee80211_hdr *hdr, bool ack, u16 tx_time) 2521 { 2522 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); 2523 2524 if (!ieee80211_is_data(hdr->frame_control)) 2525 return; 2526 2527 if (ieee80211_is_any_nullfunc(hdr->frame_control) && 2528 sdata->u.mgd.probe_send_count > 0) { 2529 if (ack) 2530 ieee80211_sta_reset_conn_monitor(sdata); 2531 else 2532 sdata->u.mgd.nullfunc_failed = true; 2533 ieee80211_queue_work(&sdata->local->hw, &sdata->work); 2534 return; 2535 } 2536 2537 if (ack) 2538 ieee80211_sta_reset_conn_monitor(sdata); 2539 } 2540 2541 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata, 2542 const u8 *src, const u8 *dst, 2543 const u8 *ssid, size_t ssid_len, 2544 struct ieee80211_channel *channel) 2545 { 2546 struct sk_buff *skb; 2547 2548 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel, 2549 ssid, ssid_len, NULL, 0, 2550 IEEE80211_PROBE_FLAG_DIRECTED); 2551 if (skb) 2552 ieee80211_tx_skb(sdata, skb); 2553 } 2554 2555 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) 2556 { 2557 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2558 const u8 *ssid; 2559 u8 *dst = ifmgd->associated->bssid; 2560 u8 unicast_limit = max(1, max_probe_tries - 3); 2561 struct sta_info *sta; 2562 2563 /* 2564 * Try sending broadcast probe requests for the last three 2565 * probe requests after the first ones failed since some 2566 * buggy APs only support broadcast probe requests. 2567 */ 2568 if (ifmgd->probe_send_count >= unicast_limit) 2569 dst = NULL; 2570 2571 /* 2572 * When the hardware reports an accurate Tx ACK status, it's 2573 * better to send a nullfunc frame instead of a probe request, 2574 * as it will kick us off the AP quickly if we aren't associated 2575 * anymore. The timeout will be reset if the frame is ACKed by 2576 * the AP. 2577 */ 2578 ifmgd->probe_send_count++; 2579 2580 if (dst) { 2581 mutex_lock(&sdata->local->sta_mtx); 2582 sta = sta_info_get(sdata, dst); 2583 if (!WARN_ON(!sta)) 2584 ieee80211_check_fast_rx(sta); 2585 mutex_unlock(&sdata->local->sta_mtx); 2586 } 2587 2588 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { 2589 ifmgd->nullfunc_failed = false; 2590 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) 2591 ifmgd->probe_send_count--; 2592 else 2593 ieee80211_send_nullfunc(sdata->local, sdata, false); 2594 } else { 2595 int ssid_len; 2596 2597 rcu_read_lock(); 2598 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); 2599 if (WARN_ON_ONCE(ssid == NULL)) 2600 ssid_len = 0; 2601 else 2602 ssid_len = ssid[1]; 2603 2604 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, 2605 ssid + 2, ssid_len, 2606 ifmgd->associated->channel); 2607 rcu_read_unlock(); 2608 } 2609 2610 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); 2611 run_again(sdata, ifmgd->probe_timeout); 2612 } 2613 2614 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, 2615 bool beacon) 2616 { 2617 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2618 bool already = false; 2619 2620 if (!ieee80211_sdata_running(sdata)) 2621 return; 2622 2623 sdata_lock(sdata); 2624 2625 if (!ifmgd->associated) 2626 goto out; 2627 2628 mutex_lock(&sdata->local->mtx); 2629 2630 if (sdata->local->tmp_channel || sdata->local->scanning) { 2631 mutex_unlock(&sdata->local->mtx); 2632 goto out; 2633 } 2634 2635 if (beacon) { 2636 mlme_dbg_ratelimited(sdata, 2637 "detected beacon loss from AP (missed %d beacons) - probing\n", 2638 beacon_loss_count); 2639 2640 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); 2641 } 2642 2643 /* 2644 * The driver/our work has already reported this event or the 2645 * connection monitoring has kicked in and we have already sent 2646 * a probe request. Or maybe the AP died and the driver keeps 2647 * reporting until we disassociate... 2648 * 2649 * In either case we have to ignore the current call to this 2650 * function (except for setting the correct probe reason bit) 2651 * because otherwise we would reset the timer every time and 2652 * never check whether we received a probe response! 2653 */ 2654 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) 2655 already = true; 2656 2657 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; 2658 2659 mutex_unlock(&sdata->local->mtx); 2660 2661 if (already) 2662 goto out; 2663 2664 mutex_lock(&sdata->local->iflist_mtx); 2665 ieee80211_recalc_ps(sdata->local); 2666 mutex_unlock(&sdata->local->iflist_mtx); 2667 2668 ifmgd->probe_send_count = 0; 2669 ieee80211_mgd_probe_ap_send(sdata); 2670 out: 2671 sdata_unlock(sdata); 2672 } 2673 2674 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, 2675 struct ieee80211_vif *vif) 2676 { 2677 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2678 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2679 struct cfg80211_bss *cbss; 2680 struct sk_buff *skb; 2681 const u8 *ssid; 2682 int ssid_len; 2683 2684 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) 2685 return NULL; 2686 2687 sdata_assert_lock(sdata); 2688 2689 if (ifmgd->associated) 2690 cbss = ifmgd->associated; 2691 else if (ifmgd->auth_data) 2692 cbss = ifmgd->auth_data->bss; 2693 else if (ifmgd->assoc_data) 2694 cbss = ifmgd->assoc_data->bss; 2695 else 2696 return NULL; 2697 2698 rcu_read_lock(); 2699 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID); 2700 if (WARN_ONCE(!ssid || ssid[1] > IEEE80211_MAX_SSID_LEN, 2701 "invalid SSID element (len=%d)", ssid ? ssid[1] : -1)) 2702 ssid_len = 0; 2703 else 2704 ssid_len = ssid[1]; 2705 2706 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, 2707 (u32) -1, cbss->channel, 2708 ssid + 2, ssid_len, 2709 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); 2710 rcu_read_unlock(); 2711 2712 return skb; 2713 } 2714 EXPORT_SYMBOL(ieee80211_ap_probereq_get); 2715 2716 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, 2717 const u8 *buf, size_t len, bool tx, 2718 u16 reason) 2719 { 2720 struct ieee80211_event event = { 2721 .type = MLME_EVENT, 2722 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, 2723 .u.mlme.reason = reason, 2724 }; 2725 2726 if (tx) 2727 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len); 2728 else 2729 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); 2730 2731 drv_event_callback(sdata->local, sdata, &event); 2732 } 2733 2734 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) 2735 { 2736 struct ieee80211_local *local = sdata->local; 2737 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2738 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 2739 bool tx; 2740 2741 sdata_lock(sdata); 2742 if (!ifmgd->associated) { 2743 sdata_unlock(sdata); 2744 return; 2745 } 2746 2747 tx = !sdata->csa_block_tx; 2748 2749 /* AP is probably out of range (or not reachable for another reason) so 2750 * remove the bss struct for that AP. 2751 */ 2752 cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated); 2753 2754 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 2755 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, 2756 tx, frame_buf); 2757 mutex_lock(&local->mtx); 2758 sdata->vif.csa_active = false; 2759 ifmgd->csa_waiting_bcn = false; 2760 if (sdata->csa_block_tx) { 2761 ieee80211_wake_vif_queues(local, sdata, 2762 IEEE80211_QUEUE_STOP_REASON_CSA); 2763 sdata->csa_block_tx = false; 2764 } 2765 mutex_unlock(&local->mtx); 2766 2767 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, 2768 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); 2769 2770 sdata_unlock(sdata); 2771 } 2772 2773 static void ieee80211_beacon_connection_loss_work(struct work_struct *work) 2774 { 2775 struct ieee80211_sub_if_data *sdata = 2776 container_of(work, struct ieee80211_sub_if_data, 2777 u.mgd.beacon_connection_loss_work); 2778 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2779 2780 if (ifmgd->associated) 2781 ifmgd->beacon_loss_count++; 2782 2783 if (ifmgd->connection_loss) { 2784 sdata_info(sdata, "Connection to AP %pM lost\n", 2785 ifmgd->bssid); 2786 __ieee80211_disconnect(sdata); 2787 } else { 2788 ieee80211_mgd_probe_ap(sdata, true); 2789 } 2790 } 2791 2792 static void ieee80211_csa_connection_drop_work(struct work_struct *work) 2793 { 2794 struct ieee80211_sub_if_data *sdata = 2795 container_of(work, struct ieee80211_sub_if_data, 2796 u.mgd.csa_connection_drop_work); 2797 2798 __ieee80211_disconnect(sdata); 2799 } 2800 2801 void ieee80211_beacon_loss(struct ieee80211_vif *vif) 2802 { 2803 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2804 struct ieee80211_hw *hw = &sdata->local->hw; 2805 2806 trace_api_beacon_loss(sdata); 2807 2808 sdata->u.mgd.connection_loss = false; 2809 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); 2810 } 2811 EXPORT_SYMBOL(ieee80211_beacon_loss); 2812 2813 void ieee80211_connection_loss(struct ieee80211_vif *vif) 2814 { 2815 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 2816 struct ieee80211_hw *hw = &sdata->local->hw; 2817 2818 trace_api_connection_loss(sdata); 2819 2820 sdata->u.mgd.connection_loss = true; 2821 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); 2822 } 2823 EXPORT_SYMBOL(ieee80211_connection_loss); 2824 2825 2826 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, 2827 bool assoc) 2828 { 2829 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; 2830 2831 sdata_assert_lock(sdata); 2832 2833 if (!assoc) { 2834 /* 2835 * we are not authenticated yet, the only timer that could be 2836 * running is the timeout for the authentication response which 2837 * which is not relevant anymore. 2838 */ 2839 del_timer_sync(&sdata->u.mgd.timer); 2840 sta_info_destroy_addr(sdata, auth_data->bss->bssid); 2841 2842 eth_zero_addr(sdata->u.mgd.bssid); 2843 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 2844 sdata->u.mgd.flags = 0; 2845 mutex_lock(&sdata->local->mtx); 2846 ieee80211_vif_release_channel(sdata); 2847 mutex_unlock(&sdata->local->mtx); 2848 } 2849 2850 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); 2851 kfree(auth_data); 2852 sdata->u.mgd.auth_data = NULL; 2853 } 2854 2855 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, 2856 bool assoc, bool abandon) 2857 { 2858 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; 2859 2860 sdata_assert_lock(sdata); 2861 2862 if (!assoc) { 2863 /* 2864 * we are not associated yet, the only timer that could be 2865 * running is the timeout for the association response which 2866 * which is not relevant anymore. 2867 */ 2868 del_timer_sync(&sdata->u.mgd.timer); 2869 sta_info_destroy_addr(sdata, assoc_data->bss->bssid); 2870 2871 eth_zero_addr(sdata->u.mgd.bssid); 2872 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 2873 sdata->u.mgd.flags = 0; 2874 sdata->vif.mu_mimo_owner = false; 2875 2876 mutex_lock(&sdata->local->mtx); 2877 ieee80211_vif_release_channel(sdata); 2878 mutex_unlock(&sdata->local->mtx); 2879 2880 if (abandon) 2881 cfg80211_abandon_assoc(sdata->dev, assoc_data->bss); 2882 } 2883 2884 kfree(assoc_data); 2885 sdata->u.mgd.assoc_data = NULL; 2886 } 2887 2888 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, 2889 struct ieee80211_mgmt *mgmt, size_t len) 2890 { 2891 struct ieee80211_local *local = sdata->local; 2892 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; 2893 u8 *pos; 2894 struct ieee802_11_elems elems; 2895 u32 tx_flags = 0; 2896 2897 pos = mgmt->u.auth.variable; 2898 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, 2899 mgmt->bssid, auth_data->bss->bssid); 2900 if (!elems.challenge) 2901 return; 2902 auth_data->expected_transaction = 4; 2903 drv_mgd_prepare_tx(sdata->local, sdata, 0); 2904 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 2905 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | 2906 IEEE80211_TX_INTFL_MLME_CONN_TX; 2907 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, 2908 elems.challenge - 2, elems.challenge_len + 2, 2909 auth_data->bss->bssid, auth_data->bss->bssid, 2910 auth_data->key, auth_data->key_len, 2911 auth_data->key_idx, tx_flags); 2912 } 2913 2914 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata, 2915 const u8 *bssid) 2916 { 2917 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2918 struct sta_info *sta; 2919 bool result = true; 2920 2921 sdata_info(sdata, "authenticated\n"); 2922 ifmgd->auth_data->done = true; 2923 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; 2924 ifmgd->auth_data->timeout_started = true; 2925 run_again(sdata, ifmgd->auth_data->timeout); 2926 2927 /* move station state to auth */ 2928 mutex_lock(&sdata->local->sta_mtx); 2929 sta = sta_info_get(sdata, bssid); 2930 if (!sta) { 2931 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid); 2932 result = false; 2933 goto out; 2934 } 2935 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { 2936 sdata_info(sdata, "failed moving %pM to auth\n", bssid); 2937 result = false; 2938 goto out; 2939 } 2940 2941 out: 2942 mutex_unlock(&sdata->local->sta_mtx); 2943 return result; 2944 } 2945 2946 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, 2947 struct ieee80211_mgmt *mgmt, size_t len) 2948 { 2949 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 2950 u8 bssid[ETH_ALEN]; 2951 u16 auth_alg, auth_transaction, status_code; 2952 struct ieee80211_event event = { 2953 .type = MLME_EVENT, 2954 .u.mlme.data = AUTH_EVENT, 2955 }; 2956 2957 sdata_assert_lock(sdata); 2958 2959 if (len < 24 + 6) 2960 return; 2961 2962 if (!ifmgd->auth_data || ifmgd->auth_data->done) 2963 return; 2964 2965 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); 2966 2967 if (!ether_addr_equal(bssid, mgmt->bssid)) 2968 return; 2969 2970 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); 2971 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); 2972 status_code = le16_to_cpu(mgmt->u.auth.status_code); 2973 2974 if (auth_alg != ifmgd->auth_data->algorithm || 2975 (auth_alg != WLAN_AUTH_SAE && 2976 auth_transaction != ifmgd->auth_data->expected_transaction) || 2977 (auth_alg == WLAN_AUTH_SAE && 2978 (auth_transaction < ifmgd->auth_data->expected_transaction || 2979 auth_transaction > 2))) { 2980 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", 2981 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, 2982 auth_transaction, 2983 ifmgd->auth_data->expected_transaction); 2984 return; 2985 } 2986 2987 if (status_code != WLAN_STATUS_SUCCESS) { 2988 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 2989 2990 if (auth_alg == WLAN_AUTH_SAE && 2991 status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED) 2992 return; 2993 2994 sdata_info(sdata, "%pM denied authentication (status %d)\n", 2995 mgmt->sa, status_code); 2996 ieee80211_destroy_auth_data(sdata, false); 2997 event.u.mlme.status = MLME_DENIED; 2998 event.u.mlme.reason = status_code; 2999 drv_event_callback(sdata->local, sdata, &event); 3000 return; 3001 } 3002 3003 switch (ifmgd->auth_data->algorithm) { 3004 case WLAN_AUTH_OPEN: 3005 case WLAN_AUTH_LEAP: 3006 case WLAN_AUTH_FT: 3007 case WLAN_AUTH_SAE: 3008 case WLAN_AUTH_FILS_SK: 3009 case WLAN_AUTH_FILS_SK_PFS: 3010 case WLAN_AUTH_FILS_PK: 3011 break; 3012 case WLAN_AUTH_SHARED_KEY: 3013 if (ifmgd->auth_data->expected_transaction != 4) { 3014 ieee80211_auth_challenge(sdata, mgmt, len); 3015 /* need another frame */ 3016 return; 3017 } 3018 break; 3019 default: 3020 WARN_ONCE(1, "invalid auth alg %d", 3021 ifmgd->auth_data->algorithm); 3022 return; 3023 } 3024 3025 event.u.mlme.status = MLME_SUCCESS; 3026 drv_event_callback(sdata->local, sdata, &event); 3027 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || 3028 (auth_transaction == 2 && 3029 ifmgd->auth_data->expected_transaction == 2)) { 3030 if (!ieee80211_mark_sta_auth(sdata, bssid)) 3031 return; /* ignore frame -- wait for timeout */ 3032 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && 3033 auth_transaction == 2) { 3034 sdata_info(sdata, "SAE peer confirmed\n"); 3035 ifmgd->auth_data->peer_confirmed = true; 3036 } 3037 3038 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 3039 } 3040 3041 #define case_WLAN(type) \ 3042 case WLAN_REASON_##type: return #type 3043 3044 const char *ieee80211_get_reason_code_string(u16 reason_code) 3045 { 3046 switch (reason_code) { 3047 case_WLAN(UNSPECIFIED); 3048 case_WLAN(PREV_AUTH_NOT_VALID); 3049 case_WLAN(DEAUTH_LEAVING); 3050 case_WLAN(DISASSOC_DUE_TO_INACTIVITY); 3051 case_WLAN(DISASSOC_AP_BUSY); 3052 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); 3053 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); 3054 case_WLAN(DISASSOC_STA_HAS_LEFT); 3055 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); 3056 case_WLAN(DISASSOC_BAD_POWER); 3057 case_WLAN(DISASSOC_BAD_SUPP_CHAN); 3058 case_WLAN(INVALID_IE); 3059 case_WLAN(MIC_FAILURE); 3060 case_WLAN(4WAY_HANDSHAKE_TIMEOUT); 3061 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); 3062 case_WLAN(IE_DIFFERENT); 3063 case_WLAN(INVALID_GROUP_CIPHER); 3064 case_WLAN(INVALID_PAIRWISE_CIPHER); 3065 case_WLAN(INVALID_AKMP); 3066 case_WLAN(UNSUPP_RSN_VERSION); 3067 case_WLAN(INVALID_RSN_IE_CAP); 3068 case_WLAN(IEEE8021X_FAILED); 3069 case_WLAN(CIPHER_SUITE_REJECTED); 3070 case_WLAN(DISASSOC_UNSPECIFIED_QOS); 3071 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); 3072 case_WLAN(DISASSOC_LOW_ACK); 3073 case_WLAN(DISASSOC_QAP_EXCEED_TXOP); 3074 case_WLAN(QSTA_LEAVE_QBSS); 3075 case_WLAN(QSTA_NOT_USE); 3076 case_WLAN(QSTA_REQUIRE_SETUP); 3077 case_WLAN(QSTA_TIMEOUT); 3078 case_WLAN(QSTA_CIPHER_NOT_SUPP); 3079 case_WLAN(MESH_PEER_CANCELED); 3080 case_WLAN(MESH_MAX_PEERS); 3081 case_WLAN(MESH_CONFIG); 3082 case_WLAN(MESH_CLOSE); 3083 case_WLAN(MESH_MAX_RETRIES); 3084 case_WLAN(MESH_CONFIRM_TIMEOUT); 3085 case_WLAN(MESH_INVALID_GTK); 3086 case_WLAN(MESH_INCONSISTENT_PARAM); 3087 case_WLAN(MESH_INVALID_SECURITY); 3088 case_WLAN(MESH_PATH_ERROR); 3089 case_WLAN(MESH_PATH_NOFORWARD); 3090 case_WLAN(MESH_PATH_DEST_UNREACHABLE); 3091 case_WLAN(MAC_EXISTS_IN_MBSS); 3092 case_WLAN(MESH_CHAN_REGULATORY); 3093 case_WLAN(MESH_CHAN); 3094 default: return "<unknown>"; 3095 } 3096 } 3097 3098 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, 3099 struct ieee80211_mgmt *mgmt, size_t len) 3100 { 3101 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3102 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); 3103 3104 sdata_assert_lock(sdata); 3105 3106 if (len < 24 + 2) 3107 return; 3108 3109 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { 3110 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); 3111 return; 3112 } 3113 3114 if (ifmgd->associated && 3115 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) { 3116 const u8 *bssid = ifmgd->associated->bssid; 3117 3118 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", 3119 bssid, reason_code, 3120 ieee80211_get_reason_code_string(reason_code)); 3121 3122 ieee80211_set_disassoc(sdata, 0, 0, false, NULL); 3123 3124 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, 3125 reason_code); 3126 return; 3127 } 3128 3129 if (ifmgd->assoc_data && 3130 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { 3131 const u8 *bssid = ifmgd->assoc_data->bss->bssid; 3132 3133 sdata_info(sdata, 3134 "deauthenticated from %pM while associating (Reason: %u=%s)\n", 3135 bssid, reason_code, 3136 ieee80211_get_reason_code_string(reason_code)); 3137 3138 ieee80211_destroy_assoc_data(sdata, false, true); 3139 3140 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); 3141 return; 3142 } 3143 } 3144 3145 3146 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, 3147 struct ieee80211_mgmt *mgmt, size_t len) 3148 { 3149 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3150 u16 reason_code; 3151 3152 sdata_assert_lock(sdata); 3153 3154 if (len < 24 + 2) 3155 return; 3156 3157 if (!ifmgd->associated || 3158 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) 3159 return; 3160 3161 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); 3162 3163 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { 3164 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); 3165 return; 3166 } 3167 3168 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", 3169 mgmt->sa, reason_code, 3170 ieee80211_get_reason_code_string(reason_code)); 3171 3172 ieee80211_set_disassoc(sdata, 0, 0, false, NULL); 3173 3174 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code); 3175 } 3176 3177 static void ieee80211_get_rates(struct ieee80211_supported_band *sband, 3178 u8 *supp_rates, unsigned int supp_rates_len, 3179 u32 *rates, u32 *basic_rates, 3180 bool *have_higher_than_11mbit, 3181 int *min_rate, int *min_rate_index, 3182 int shift) 3183 { 3184 int i, j; 3185 3186 for (i = 0; i < supp_rates_len; i++) { 3187 int rate = supp_rates[i] & 0x7f; 3188 bool is_basic = !!(supp_rates[i] & 0x80); 3189 3190 if ((rate * 5 * (1 << shift)) > 110) 3191 *have_higher_than_11mbit = true; 3192 3193 /* 3194 * Skip HT, VHT and HE BSS membership selectors since they're 3195 * not rates. 3196 * 3197 * Note: Even though the membership selector and the basic 3198 * rate flag share the same bit, they are not exactly 3199 * the same. 3200 */ 3201 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || 3202 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) || 3203 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY)) 3204 continue; 3205 3206 for (j = 0; j < sband->n_bitrates; j++) { 3207 struct ieee80211_rate *br; 3208 int brate; 3209 3210 br = &sband->bitrates[j]; 3211 3212 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); 3213 if (brate == rate) { 3214 *rates |= BIT(j); 3215 if (is_basic) 3216 *basic_rates |= BIT(j); 3217 if ((rate * 5) < *min_rate) { 3218 *min_rate = rate * 5; 3219 *min_rate_index = j; 3220 } 3221 break; 3222 } 3223 } 3224 } 3225 } 3226 3227 static bool ieee80211_twt_req_supported(const struct sta_info *sta, 3228 const struct ieee802_11_elems *elems) 3229 { 3230 if (elems->ext_capab_len < 10) 3231 return false; 3232 3233 if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT)) 3234 return false; 3235 3236 return sta->sta.he_cap.he_cap_elem.mac_cap_info[0] & 3237 IEEE80211_HE_MAC_CAP0_TWT_RES; 3238 } 3239 3240 static int ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata, 3241 struct sta_info *sta, 3242 struct ieee802_11_elems *elems) 3243 { 3244 bool twt = ieee80211_twt_req_supported(sta, elems); 3245 3246 if (sdata->vif.bss_conf.twt_requester != twt) { 3247 sdata->vif.bss_conf.twt_requester = twt; 3248 return BSS_CHANGED_TWT; 3249 } 3250 return 0; 3251 } 3252 3253 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, 3254 struct cfg80211_bss *cbss, 3255 struct ieee80211_mgmt *mgmt, size_t len, 3256 struct ieee802_11_elems *elems) 3257 { 3258 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3259 struct ieee80211_local *local = sdata->local; 3260 struct ieee80211_supported_band *sband; 3261 struct sta_info *sta; 3262 u16 capab_info, aid; 3263 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 3264 const struct cfg80211_bss_ies *bss_ies = NULL; 3265 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 3266 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; 3267 u32 changed = 0; 3268 int err; 3269 bool ret; 3270 3271 /* AssocResp and ReassocResp have identical structure */ 3272 3273 aid = le16_to_cpu(mgmt->u.assoc_resp.aid); 3274 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); 3275 3276 /* 3277 * The 5 MSB of the AID field are reserved 3278 * (802.11-2016 9.4.1.8 AID field) 3279 */ 3280 aid &= 0x7ff; 3281 3282 ifmgd->broken_ap = false; 3283 3284 if (aid == 0 || aid > IEEE80211_MAX_AID) { 3285 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n", 3286 aid); 3287 aid = 0; 3288 ifmgd->broken_ap = true; 3289 } 3290 3291 if (!elems->supp_rates) { 3292 sdata_info(sdata, "no SuppRates element in AssocResp\n"); 3293 return false; 3294 } 3295 3296 sdata->vif.bss_conf.aid = aid; 3297 ifmgd->tdls_chan_switch_prohibited = 3298 elems->ext_capab && elems->ext_capab_len >= 5 && 3299 (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); 3300 3301 /* 3302 * Some APs are erroneously not including some information in their 3303 * (re)association response frames. Try to recover by using the data 3304 * from the beacon or probe response. This seems to afflict mobile 3305 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", 3306 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. 3307 */ 3308 if (!is_6ghz && 3309 ((assoc_data->wmm && !elems->wmm_param) || 3310 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 3311 (!elems->ht_cap_elem || !elems->ht_operation)) || 3312 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 3313 (!elems->vht_cap_elem || !elems->vht_operation)))) { 3314 const struct cfg80211_bss_ies *ies; 3315 struct ieee802_11_elems bss_elems; 3316 3317 rcu_read_lock(); 3318 ies = rcu_dereference(cbss->ies); 3319 if (ies) 3320 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, 3321 GFP_ATOMIC); 3322 rcu_read_unlock(); 3323 if (!bss_ies) 3324 return false; 3325 3326 ieee802_11_parse_elems(bss_ies->data, bss_ies->len, 3327 false, &bss_elems, 3328 mgmt->bssid, 3329 assoc_data->bss->bssid); 3330 if (assoc_data->wmm && 3331 !elems->wmm_param && bss_elems.wmm_param) { 3332 elems->wmm_param = bss_elems.wmm_param; 3333 sdata_info(sdata, 3334 "AP bug: WMM param missing from AssocResp\n"); 3335 } 3336 3337 /* 3338 * Also check if we requested HT/VHT, otherwise the AP doesn't 3339 * have to include the IEs in the (re)association response. 3340 */ 3341 if (!elems->ht_cap_elem && bss_elems.ht_cap_elem && 3342 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 3343 elems->ht_cap_elem = bss_elems.ht_cap_elem; 3344 sdata_info(sdata, 3345 "AP bug: HT capability missing from AssocResp\n"); 3346 } 3347 if (!elems->ht_operation && bss_elems.ht_operation && 3348 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 3349 elems->ht_operation = bss_elems.ht_operation; 3350 sdata_info(sdata, 3351 "AP bug: HT operation missing from AssocResp\n"); 3352 } 3353 if (!elems->vht_cap_elem && bss_elems.vht_cap_elem && 3354 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { 3355 elems->vht_cap_elem = bss_elems.vht_cap_elem; 3356 sdata_info(sdata, 3357 "AP bug: VHT capa missing from AssocResp\n"); 3358 } 3359 if (!elems->vht_operation && bss_elems.vht_operation && 3360 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { 3361 elems->vht_operation = bss_elems.vht_operation; 3362 sdata_info(sdata, 3363 "AP bug: VHT operation missing from AssocResp\n"); 3364 } 3365 } 3366 3367 /* 3368 * We previously checked these in the beacon/probe response, so 3369 * they should be present here. This is just a safety net. 3370 */ 3371 if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && 3372 (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) { 3373 sdata_info(sdata, 3374 "HT AP is missing WMM params or HT capability/operation\n"); 3375 ret = false; 3376 goto out; 3377 } 3378 3379 if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 3380 (!elems->vht_cap_elem || !elems->vht_operation)) { 3381 sdata_info(sdata, 3382 "VHT AP is missing VHT capability/operation\n"); 3383 ret = false; 3384 goto out; 3385 } 3386 3387 if (is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && 3388 !elems->he_6ghz_capa) { 3389 sdata_info(sdata, 3390 "HE 6 GHz AP is missing HE 6 GHz band capability\n"); 3391 ret = false; 3392 goto out; 3393 } 3394 3395 mutex_lock(&sdata->local->sta_mtx); 3396 /* 3397 * station info was already allocated and inserted before 3398 * the association and should be available to us 3399 */ 3400 sta = sta_info_get(sdata, cbss->bssid); 3401 if (WARN_ON(!sta)) { 3402 mutex_unlock(&sdata->local->sta_mtx); 3403 ret = false; 3404 goto out; 3405 } 3406 3407 sband = ieee80211_get_sband(sdata); 3408 if (!sband) { 3409 mutex_unlock(&sdata->local->sta_mtx); 3410 ret = false; 3411 goto out; 3412 } 3413 3414 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && 3415 (!elems->he_cap || !elems->he_operation)) { 3416 mutex_unlock(&sdata->local->sta_mtx); 3417 sdata_info(sdata, 3418 "HE AP is missing HE capability/operation\n"); 3419 ret = false; 3420 goto out; 3421 } 3422 3423 /* Set up internal HT/VHT capabilities */ 3424 if (elems->ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) 3425 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, 3426 elems->ht_cap_elem, sta); 3427 3428 if (elems->vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) 3429 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, 3430 elems->vht_cap_elem, sta); 3431 3432 if (elems->he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && 3433 elems->he_cap) { 3434 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, 3435 elems->he_cap, 3436 elems->he_cap_len, 3437 elems->he_6ghz_capa, 3438 sta); 3439 3440 bss_conf->he_support = sta->sta.he_cap.has_he; 3441 if (elems->rsnx && elems->rsnx_len && 3442 (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) && 3443 wiphy_ext_feature_isset(local->hw.wiphy, 3444 NL80211_EXT_FEATURE_PROTECTED_TWT)) 3445 bss_conf->twt_protected = true; 3446 else 3447 bss_conf->twt_protected = false; 3448 3449 changed |= ieee80211_recalc_twt_req(sdata, sta, elems); 3450 } else { 3451 bss_conf->he_support = false; 3452 bss_conf->twt_requester = false; 3453 bss_conf->twt_protected = false; 3454 } 3455 3456 if (bss_conf->he_support) { 3457 bss_conf->he_bss_color.color = 3458 le32_get_bits(elems->he_operation->he_oper_params, 3459 IEEE80211_HE_OPERATION_BSS_COLOR_MASK); 3460 bss_conf->he_bss_color.partial = 3461 le32_get_bits(elems->he_operation->he_oper_params, 3462 IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR); 3463 bss_conf->he_bss_color.disabled = 3464 le32_get_bits(elems->he_operation->he_oper_params, 3465 IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED); 3466 changed |= BSS_CHANGED_HE_BSS_COLOR; 3467 3468 bss_conf->htc_trig_based_pkt_ext = 3469 le32_get_bits(elems->he_operation->he_oper_params, 3470 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK); 3471 bss_conf->frame_time_rts_th = 3472 le32_get_bits(elems->he_operation->he_oper_params, 3473 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK); 3474 3475 bss_conf->multi_sta_back_32bit = 3476 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & 3477 IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP; 3478 3479 bss_conf->ack_enabled = 3480 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & 3481 IEEE80211_HE_MAC_CAP2_ACK_EN; 3482 3483 bss_conf->uora_exists = !!elems->uora_element; 3484 if (elems->uora_element) 3485 bss_conf->uora_ocw_range = elems->uora_element[0]; 3486 3487 ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation); 3488 ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr); 3489 /* TODO: OPEN: what happens if BSS color disable is set? */ 3490 } 3491 3492 if (cbss->transmitted_bss) { 3493 bss_conf->nontransmitted = true; 3494 ether_addr_copy(bss_conf->transmitter_bssid, 3495 cbss->transmitted_bss->bssid); 3496 bss_conf->bssid_indicator = cbss->max_bssid_indicator; 3497 bss_conf->bssid_index = cbss->bssid_index; 3498 } 3499 3500 /* 3501 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data 3502 * in their association response, so ignore that data for our own 3503 * configuration. If it changed since the last beacon, we'll get the 3504 * next beacon and update then. 3505 */ 3506 3507 /* 3508 * If an operating mode notification IE is present, override the 3509 * NSS calculation (that would be done in rate_control_rate_init()) 3510 * and use the # of streams from that element. 3511 */ 3512 if (elems->opmode_notif && 3513 !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { 3514 u8 nss; 3515 3516 nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; 3517 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; 3518 nss += 1; 3519 sta->sta.rx_nss = nss; 3520 } 3521 3522 rate_control_rate_init(sta); 3523 3524 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { 3525 set_sta_flag(sta, WLAN_STA_MFP); 3526 sta->sta.mfp = true; 3527 } else { 3528 sta->sta.mfp = false; 3529 } 3530 3531 sta->sta.wme = elems->wmm_param && local->hw.queues >= IEEE80211_NUM_ACS; 3532 3533 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); 3534 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) 3535 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); 3536 if (err) { 3537 sdata_info(sdata, 3538 "failed to move station %pM to desired state\n", 3539 sta->sta.addr); 3540 WARN_ON(__sta_info_destroy(sta)); 3541 mutex_unlock(&sdata->local->sta_mtx); 3542 ret = false; 3543 goto out; 3544 } 3545 3546 mutex_unlock(&sdata->local->sta_mtx); 3547 3548 /* 3549 * Always handle WMM once after association regardless 3550 * of the first value the AP uses. Setting -1 here has 3551 * that effect because the AP values is an unsigned 3552 * 4-bit value. 3553 */ 3554 ifmgd->wmm_last_param_set = -1; 3555 ifmgd->mu_edca_last_param_set = -1; 3556 3557 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { 3558 ieee80211_set_wmm_default(sdata, false, false); 3559 } else if (!ieee80211_sta_wmm_params(local, sdata, elems->wmm_param, 3560 elems->wmm_param_len, 3561 elems->mu_edca_param_set)) { 3562 /* still enable QoS since we might have HT/VHT */ 3563 ieee80211_set_wmm_default(sdata, false, true); 3564 /* set the disable-WMM flag in this case to disable 3565 * tracking WMM parameter changes in the beacon if 3566 * the parameters weren't actually valid. Doing so 3567 * avoids changing parameters very strangely when 3568 * the AP is going back and forth between valid and 3569 * invalid parameters. 3570 */ 3571 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM; 3572 } 3573 changed |= BSS_CHANGED_QOS; 3574 3575 if (elems->max_idle_period_ie) { 3576 bss_conf->max_idle_period = 3577 le16_to_cpu(elems->max_idle_period_ie->max_idle_period); 3578 bss_conf->protected_keep_alive = 3579 !!(elems->max_idle_period_ie->idle_options & 3580 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); 3581 changed |= BSS_CHANGED_KEEP_ALIVE; 3582 } else { 3583 bss_conf->max_idle_period = 0; 3584 bss_conf->protected_keep_alive = false; 3585 } 3586 3587 /* set assoc capability (AID was already set earlier), 3588 * ieee80211_set_associated() will tell the driver */ 3589 bss_conf->assoc_capability = capab_info; 3590 ieee80211_set_associated(sdata, cbss, changed); 3591 3592 /* 3593 * If we're using 4-addr mode, let the AP know that we're 3594 * doing so, so that it can create the STA VLAN on its side 3595 */ 3596 if (ifmgd->use_4addr) 3597 ieee80211_send_4addr_nullfunc(local, sdata); 3598 3599 /* 3600 * Start timer to probe the connection to the AP now. 3601 * Also start the timer that will detect beacon loss. 3602 */ 3603 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); 3604 ieee80211_sta_reset_beacon_monitor(sdata); 3605 3606 ret = true; 3607 out: 3608 kfree(bss_ies); 3609 return ret; 3610 } 3611 3612 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, 3613 struct ieee80211_mgmt *mgmt, 3614 size_t len) 3615 { 3616 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3617 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; 3618 u16 capab_info, status_code, aid; 3619 struct ieee802_11_elems elems; 3620 int ac, uapsd_queues = -1; 3621 u8 *pos; 3622 bool reassoc; 3623 struct cfg80211_bss *bss; 3624 struct ieee80211_event event = { 3625 .type = MLME_EVENT, 3626 .u.mlme.data = ASSOC_EVENT, 3627 }; 3628 3629 sdata_assert_lock(sdata); 3630 3631 if (!assoc_data) 3632 return; 3633 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid)) 3634 return; 3635 3636 /* 3637 * AssocResp and ReassocResp have identical structure, so process both 3638 * of them in this function. 3639 */ 3640 3641 if (len < 24 + 6) 3642 return; 3643 3644 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control); 3645 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); 3646 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); 3647 aid = le16_to_cpu(mgmt->u.assoc_resp.aid); 3648 3649 sdata_info(sdata, 3650 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", 3651 reassoc ? "Rea" : "A", mgmt->sa, 3652 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); 3653 3654 if (assoc_data->fils_kek_len && 3655 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) 3656 return; 3657 3658 pos = mgmt->u.assoc_resp.variable; 3659 ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, 3660 mgmt->bssid, assoc_data->bss->bssid); 3661 3662 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && 3663 elems.timeout_int && 3664 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { 3665 u32 tu, ms; 3666 tu = le32_to_cpu(elems.timeout_int->value); 3667 ms = tu * 1024 / 1000; 3668 sdata_info(sdata, 3669 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", 3670 mgmt->sa, tu, ms); 3671 assoc_data->timeout = jiffies + msecs_to_jiffies(ms); 3672 assoc_data->timeout_started = true; 3673 if (ms > IEEE80211_ASSOC_TIMEOUT) 3674 run_again(sdata, assoc_data->timeout); 3675 return; 3676 } 3677 3678 bss = assoc_data->bss; 3679 3680 if (status_code != WLAN_STATUS_SUCCESS) { 3681 sdata_info(sdata, "%pM denied association (code=%d)\n", 3682 mgmt->sa, status_code); 3683 ieee80211_destroy_assoc_data(sdata, false, false); 3684 event.u.mlme.status = MLME_DENIED; 3685 event.u.mlme.reason = status_code; 3686 drv_event_callback(sdata->local, sdata, &event); 3687 } else { 3688 if (!ieee80211_assoc_success(sdata, bss, mgmt, len, &elems)) { 3689 /* oops -- internal error -- send timeout for now */ 3690 ieee80211_destroy_assoc_data(sdata, false, false); 3691 cfg80211_assoc_timeout(sdata->dev, bss); 3692 return; 3693 } 3694 event.u.mlme.status = MLME_SUCCESS; 3695 drv_event_callback(sdata->local, sdata, &event); 3696 sdata_info(sdata, "associated\n"); 3697 3698 /* 3699 * destroy assoc_data afterwards, as otherwise an idle 3700 * recalc after assoc_data is NULL but before associated 3701 * is set can cause the interface to go idle 3702 */ 3703 ieee80211_destroy_assoc_data(sdata, true, false); 3704 3705 /* get uapsd queues configuration */ 3706 uapsd_queues = 0; 3707 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) 3708 if (sdata->tx_conf[ac].uapsd) 3709 uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; 3710 } 3711 3712 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues, 3713 ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len); 3714 } 3715 3716 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, 3717 struct ieee80211_mgmt *mgmt, size_t len, 3718 struct ieee80211_rx_status *rx_status) 3719 { 3720 struct ieee80211_local *local = sdata->local; 3721 struct ieee80211_bss *bss; 3722 struct ieee80211_channel *channel; 3723 3724 sdata_assert_lock(sdata); 3725 3726 channel = ieee80211_get_channel_khz(local->hw.wiphy, 3727 ieee80211_rx_status_to_khz(rx_status)); 3728 if (!channel) 3729 return; 3730 3731 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel); 3732 if (bss) { 3733 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate; 3734 ieee80211_rx_bss_put(local, bss); 3735 } 3736 } 3737 3738 3739 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, 3740 struct sk_buff *skb) 3741 { 3742 struct ieee80211_mgmt *mgmt = (void *)skb->data; 3743 struct ieee80211_if_managed *ifmgd; 3744 struct ieee80211_rx_status *rx_status = (void *) skb->cb; 3745 struct ieee80211_channel *channel; 3746 size_t baselen, len = skb->len; 3747 3748 ifmgd = &sdata->u.mgd; 3749 3750 sdata_assert_lock(sdata); 3751 3752 /* 3753 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2: 3754 * "If a 6 GHz AP receives a Probe Request frame and responds with 3755 * a Probe Response frame [..], the Address 1 field of the Probe 3756 * Response frame shall be set to the broadcast address [..]" 3757 * So, on 6GHz band we should also accept broadcast responses. 3758 */ 3759 channel = ieee80211_get_channel(sdata->local->hw.wiphy, 3760 rx_status->freq); 3761 if (!channel) 3762 return; 3763 3764 if (!ether_addr_equal(mgmt->da, sdata->vif.addr) && 3765 (channel->band != NL80211_BAND_6GHZ || 3766 !is_broadcast_ether_addr(mgmt->da))) 3767 return; /* ignore ProbeResp to foreign address */ 3768 3769 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; 3770 if (baselen > len) 3771 return; 3772 3773 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 3774 3775 if (ifmgd->associated && 3776 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) 3777 ieee80211_reset_ap_probe(sdata); 3778 } 3779 3780 /* 3781 * This is the canonical list of information elements we care about, 3782 * the filter code also gives us all changes to the Microsoft OUI 3783 * (00:50:F2) vendor IE which is used for WMM which we need to track, 3784 * as well as the DTPC IE (part of the Cisco OUI) used for signaling 3785 * changes to requested client power. 3786 * 3787 * We implement beacon filtering in software since that means we can 3788 * avoid processing the frame here and in cfg80211, and userspace 3789 * will not be able to tell whether the hardware supports it or not. 3790 * 3791 * XXX: This list needs to be dynamic -- userspace needs to be able to 3792 * add items it requires. It also needs to be able to tell us to 3793 * look out for other vendor IEs. 3794 */ 3795 static const u64 care_about_ies = 3796 (1ULL << WLAN_EID_COUNTRY) | 3797 (1ULL << WLAN_EID_ERP_INFO) | 3798 (1ULL << WLAN_EID_CHANNEL_SWITCH) | 3799 (1ULL << WLAN_EID_PWR_CONSTRAINT) | 3800 (1ULL << WLAN_EID_HT_CAPABILITY) | 3801 (1ULL << WLAN_EID_HT_OPERATION) | 3802 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); 3803 3804 static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata, 3805 struct ieee80211_if_managed *ifmgd, 3806 struct ieee80211_bss_conf *bss_conf, 3807 struct ieee80211_local *local, 3808 struct ieee80211_rx_status *rx_status) 3809 { 3810 /* Track average RSSI from the Beacon frames of the current AP */ 3811 3812 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) { 3813 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE; 3814 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal); 3815 ifmgd->last_cqm_event_signal = 0; 3816 ifmgd->count_beacon_signal = 1; 3817 ifmgd->last_ave_beacon_signal = 0; 3818 } else { 3819 ifmgd->count_beacon_signal++; 3820 } 3821 3822 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal); 3823 3824 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && 3825 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { 3826 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3827 int last_sig = ifmgd->last_ave_beacon_signal; 3828 struct ieee80211_event event = { 3829 .type = RSSI_EVENT, 3830 }; 3831 3832 /* 3833 * if signal crosses either of the boundaries, invoke callback 3834 * with appropriate parameters 3835 */ 3836 if (sig > ifmgd->rssi_max_thold && 3837 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { 3838 ifmgd->last_ave_beacon_signal = sig; 3839 event.u.rssi.data = RSSI_EVENT_HIGH; 3840 drv_event_callback(local, sdata, &event); 3841 } else if (sig < ifmgd->rssi_min_thold && 3842 (last_sig >= ifmgd->rssi_max_thold || 3843 last_sig == 0)) { 3844 ifmgd->last_ave_beacon_signal = sig; 3845 event.u.rssi.data = RSSI_EVENT_LOW; 3846 drv_event_callback(local, sdata, &event); 3847 } 3848 } 3849 3850 if (bss_conf->cqm_rssi_thold && 3851 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && 3852 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { 3853 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3854 int last_event = ifmgd->last_cqm_event_signal; 3855 int thold = bss_conf->cqm_rssi_thold; 3856 int hyst = bss_conf->cqm_rssi_hyst; 3857 3858 if (sig < thold && 3859 (last_event == 0 || sig < last_event - hyst)) { 3860 ifmgd->last_cqm_event_signal = sig; 3861 ieee80211_cqm_rssi_notify( 3862 &sdata->vif, 3863 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 3864 sig, GFP_KERNEL); 3865 } else if (sig > thold && 3866 (last_event == 0 || sig > last_event + hyst)) { 3867 ifmgd->last_cqm_event_signal = sig; 3868 ieee80211_cqm_rssi_notify( 3869 &sdata->vif, 3870 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 3871 sig, GFP_KERNEL); 3872 } 3873 } 3874 3875 if (bss_conf->cqm_rssi_low && 3876 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { 3877 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); 3878 int last_event = ifmgd->last_cqm_event_signal; 3879 int low = bss_conf->cqm_rssi_low; 3880 int high = bss_conf->cqm_rssi_high; 3881 3882 if (sig < low && 3883 (last_event == 0 || last_event >= low)) { 3884 ifmgd->last_cqm_event_signal = sig; 3885 ieee80211_cqm_rssi_notify( 3886 &sdata->vif, 3887 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 3888 sig, GFP_KERNEL); 3889 } else if (sig > high && 3890 (last_event == 0 || last_event <= high)) { 3891 ifmgd->last_cqm_event_signal = sig; 3892 ieee80211_cqm_rssi_notify( 3893 &sdata->vif, 3894 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 3895 sig, GFP_KERNEL); 3896 } 3897 } 3898 } 3899 3900 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, 3901 struct cfg80211_bss *bss) 3902 { 3903 if (ether_addr_equal(tx_bssid, bss->bssid)) 3904 return true; 3905 if (!bss->transmitted_bss) 3906 return false; 3907 return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); 3908 } 3909 3910 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, 3911 struct ieee80211_mgmt *mgmt, size_t len, 3912 struct ieee80211_rx_status *rx_status) 3913 { 3914 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 3915 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; 3916 size_t baselen; 3917 struct ieee802_11_elems elems; 3918 struct ieee80211_local *local = sdata->local; 3919 struct ieee80211_chanctx_conf *chanctx_conf; 3920 struct ieee80211_channel *chan; 3921 struct sta_info *sta; 3922 u32 changed = 0; 3923 bool erp_valid; 3924 u8 erp_value = 0; 3925 u32 ncrc; 3926 u8 *bssid; 3927 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; 3928 3929 sdata_assert_lock(sdata); 3930 3931 /* Process beacon from the current BSS */ 3932 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; 3933 if (baselen > len) 3934 return; 3935 3936 rcu_read_lock(); 3937 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); 3938 if (!chanctx_conf) { 3939 rcu_read_unlock(); 3940 return; 3941 } 3942 3943 if (ieee80211_rx_status_to_khz(rx_status) != 3944 ieee80211_channel_to_khz(chanctx_conf->def.chan)) { 3945 rcu_read_unlock(); 3946 return; 3947 } 3948 chan = chanctx_conf->def.chan; 3949 rcu_read_unlock(); 3950 3951 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && 3952 ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) { 3953 ieee802_11_parse_elems(mgmt->u.beacon.variable, 3954 len - baselen, false, &elems, 3955 mgmt->bssid, 3956 ifmgd->assoc_data->bss->bssid); 3957 3958 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 3959 3960 if (elems.dtim_period) 3961 ifmgd->dtim_period = elems.dtim_period; 3962 ifmgd->have_beacon = true; 3963 ifmgd->assoc_data->need_beacon = false; 3964 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 3965 sdata->vif.bss_conf.sync_tsf = 3966 le64_to_cpu(mgmt->u.beacon.timestamp); 3967 sdata->vif.bss_conf.sync_device_ts = 3968 rx_status->device_timestamp; 3969 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; 3970 } 3971 3972 if (elems.mbssid_config_ie) 3973 bss_conf->profile_periodicity = 3974 elems.mbssid_config_ie->profile_periodicity; 3975 3976 if (elems.ext_capab_len >= 11 && 3977 (elems.ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) 3978 bss_conf->ema_ap = true; 3979 3980 /* continue assoc process */ 3981 ifmgd->assoc_data->timeout = jiffies; 3982 ifmgd->assoc_data->timeout_started = true; 3983 run_again(sdata, ifmgd->assoc_data->timeout); 3984 return; 3985 } 3986 3987 if (!ifmgd->associated || 3988 !ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->associated)) 3989 return; 3990 bssid = ifmgd->associated->bssid; 3991 3992 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL)) 3993 ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf, 3994 local, rx_status); 3995 3996 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { 3997 mlme_dbg_ratelimited(sdata, 3998 "cancelling AP probe due to a received beacon\n"); 3999 ieee80211_reset_ap_probe(sdata); 4000 } 4001 4002 /* 4003 * Push the beacon loss detection into the future since 4004 * we are processing a beacon from the AP just now. 4005 */ 4006 ieee80211_sta_reset_beacon_monitor(sdata); 4007 4008 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); 4009 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, 4010 len - baselen, false, &elems, 4011 care_about_ies, ncrc, 4012 mgmt->bssid, bssid); 4013 4014 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && 4015 ieee80211_check_tim(elems.tim, elems.tim_len, bss_conf->aid)) { 4016 if (local->hw.conf.dynamic_ps_timeout > 0) { 4017 if (local->hw.conf.flags & IEEE80211_CONF_PS) { 4018 local->hw.conf.flags &= ~IEEE80211_CONF_PS; 4019 ieee80211_hw_config(local, 4020 IEEE80211_CONF_CHANGE_PS); 4021 } 4022 ieee80211_send_nullfunc(local, sdata, false); 4023 } else if (!local->pspolling && sdata->u.mgd.powersave) { 4024 local->pspolling = true; 4025 4026 /* 4027 * Here is assumed that the driver will be 4028 * able to send ps-poll frame and receive a 4029 * response even though power save mode is 4030 * enabled, but some drivers might require 4031 * to disable power save here. This needs 4032 * to be investigated. 4033 */ 4034 ieee80211_send_pspoll(local, sdata); 4035 } 4036 } 4037 4038 if (sdata->vif.p2p || 4039 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { 4040 struct ieee80211_p2p_noa_attr noa = {}; 4041 int ret; 4042 4043 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, 4044 len - baselen, 4045 IEEE80211_P2P_ATTR_ABSENCE_NOTICE, 4046 (u8 *) &noa, sizeof(noa)); 4047 if (ret >= 2) { 4048 if (sdata->u.mgd.p2p_noa_index != noa.index) { 4049 /* valid noa_attr and index changed */ 4050 sdata->u.mgd.p2p_noa_index = noa.index; 4051 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); 4052 changed |= BSS_CHANGED_P2P_PS; 4053 /* 4054 * make sure we update all information, the CRC 4055 * mechanism doesn't look at P2P attributes. 4056 */ 4057 ifmgd->beacon_crc_valid = false; 4058 } 4059 } else if (sdata->u.mgd.p2p_noa_index != -1) { 4060 /* noa_attr not found and we had valid noa_attr before */ 4061 sdata->u.mgd.p2p_noa_index = -1; 4062 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); 4063 changed |= BSS_CHANGED_P2P_PS; 4064 ifmgd->beacon_crc_valid = false; 4065 } 4066 } 4067 4068 if (ifmgd->csa_waiting_bcn) 4069 ieee80211_chswitch_post_beacon(sdata); 4070 4071 /* 4072 * Update beacon timing and dtim count on every beacon appearance. This 4073 * will allow the driver to use the most updated values. Do it before 4074 * comparing this one with last received beacon. 4075 * IMPORTANT: These parameters would possibly be out of sync by the time 4076 * the driver will use them. The synchronized view is currently 4077 * guaranteed only in certain callbacks. 4078 */ 4079 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 4080 sdata->vif.bss_conf.sync_tsf = 4081 le64_to_cpu(mgmt->u.beacon.timestamp); 4082 sdata->vif.bss_conf.sync_device_ts = 4083 rx_status->device_timestamp; 4084 sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; 4085 } 4086 4087 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) 4088 return; 4089 ifmgd->beacon_crc = ncrc; 4090 ifmgd->beacon_crc_valid = true; 4091 4092 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); 4093 4094 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, 4095 rx_status->device_timestamp, 4096 &elems, true); 4097 4098 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && 4099 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, 4100 elems.wmm_param_len, 4101 elems.mu_edca_param_set)) 4102 changed |= BSS_CHANGED_QOS; 4103 4104 /* 4105 * If we haven't had a beacon before, tell the driver about the 4106 * DTIM period (and beacon timing if desired) now. 4107 */ 4108 if (!ifmgd->have_beacon) { 4109 /* a few bogus AP send dtim_period = 0 or no TIM IE */ 4110 bss_conf->dtim_period = elems.dtim_period ?: 1; 4111 4112 changed |= BSS_CHANGED_BEACON_INFO; 4113 ifmgd->have_beacon = true; 4114 4115 mutex_lock(&local->iflist_mtx); 4116 ieee80211_recalc_ps(local); 4117 mutex_unlock(&local->iflist_mtx); 4118 4119 ieee80211_recalc_ps_vif(sdata); 4120 } 4121 4122 if (elems.erp_info) { 4123 erp_valid = true; 4124 erp_value = elems.erp_info[0]; 4125 } else { 4126 erp_valid = false; 4127 } 4128 changed |= ieee80211_handle_bss_capability(sdata, 4129 le16_to_cpu(mgmt->u.beacon.capab_info), 4130 erp_valid, erp_value); 4131 4132 mutex_lock(&local->sta_mtx); 4133 sta = sta_info_get(sdata, bssid); 4134 4135 changed |= ieee80211_recalc_twt_req(sdata, sta, &elems); 4136 4137 if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem, 4138 elems.vht_cap_elem, elems.ht_operation, 4139 elems.vht_operation, elems.he_operation, 4140 bssid, &changed)) { 4141 mutex_unlock(&local->sta_mtx); 4142 sdata_info(sdata, 4143 "failed to follow AP %pM bandwidth change, disconnect\n", 4144 bssid); 4145 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 4146 WLAN_REASON_DEAUTH_LEAVING, 4147 true, deauth_buf); 4148 ieee80211_report_disconnect(sdata, deauth_buf, 4149 sizeof(deauth_buf), true, 4150 WLAN_REASON_DEAUTH_LEAVING); 4151 return; 4152 } 4153 4154 if (sta && elems.opmode_notif) 4155 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, 4156 rx_status->band); 4157 mutex_unlock(&local->sta_mtx); 4158 4159 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, 4160 elems.country_elem, 4161 elems.country_elem_len, 4162 elems.pwr_constr_elem, 4163 elems.cisco_dtpc_elem); 4164 4165 ieee80211_bss_info_change_notify(sdata, changed); 4166 } 4167 4168 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, 4169 struct sk_buff *skb) 4170 { 4171 struct ieee80211_rx_status *rx_status; 4172 struct ieee80211_mgmt *mgmt; 4173 u16 fc; 4174 struct ieee802_11_elems elems; 4175 int ies_len; 4176 4177 rx_status = (struct ieee80211_rx_status *) skb->cb; 4178 mgmt = (struct ieee80211_mgmt *) skb->data; 4179 fc = le16_to_cpu(mgmt->frame_control); 4180 4181 sdata_lock(sdata); 4182 4183 switch (fc & IEEE80211_FCTL_STYPE) { 4184 case IEEE80211_STYPE_BEACON: 4185 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); 4186 break; 4187 case IEEE80211_STYPE_PROBE_RESP: 4188 ieee80211_rx_mgmt_probe_resp(sdata, skb); 4189 break; 4190 case IEEE80211_STYPE_AUTH: 4191 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); 4192 break; 4193 case IEEE80211_STYPE_DEAUTH: 4194 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); 4195 break; 4196 case IEEE80211_STYPE_DISASSOC: 4197 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); 4198 break; 4199 case IEEE80211_STYPE_ASSOC_RESP: 4200 case IEEE80211_STYPE_REASSOC_RESP: 4201 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); 4202 break; 4203 case IEEE80211_STYPE_ACTION: 4204 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { 4205 ies_len = skb->len - 4206 offsetof(struct ieee80211_mgmt, 4207 u.action.u.chan_switch.variable); 4208 4209 if (ies_len < 0) 4210 break; 4211 4212 /* CSA IE cannot be overridden, no need for BSSID */ 4213 ieee802_11_parse_elems( 4214 mgmt->u.action.u.chan_switch.variable, 4215 ies_len, true, &elems, mgmt->bssid, NULL); 4216 4217 if (elems.parse_error) 4218 break; 4219 4220 ieee80211_sta_process_chanswitch(sdata, 4221 rx_status->mactime, 4222 rx_status->device_timestamp, 4223 &elems, false); 4224 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { 4225 ies_len = skb->len - 4226 offsetof(struct ieee80211_mgmt, 4227 u.action.u.ext_chan_switch.variable); 4228 4229 if (ies_len < 0) 4230 break; 4231 4232 /* 4233 * extended CSA IE can't be overridden, no need for 4234 * BSSID 4235 */ 4236 ieee802_11_parse_elems( 4237 mgmt->u.action.u.ext_chan_switch.variable, 4238 ies_len, true, &elems, mgmt->bssid, NULL); 4239 4240 if (elems.parse_error) 4241 break; 4242 4243 /* for the handling code pretend this was also an IE */ 4244 elems.ext_chansw_ie = 4245 &mgmt->u.action.u.ext_chan_switch.data; 4246 4247 ieee80211_sta_process_chanswitch(sdata, 4248 rx_status->mactime, 4249 rx_status->device_timestamp, 4250 &elems, false); 4251 } 4252 break; 4253 } 4254 sdata_unlock(sdata); 4255 } 4256 4257 static void ieee80211_sta_timer(struct timer_list *t) 4258 { 4259 struct ieee80211_sub_if_data *sdata = 4260 from_timer(sdata, t, u.mgd.timer); 4261 4262 ieee80211_queue_work(&sdata->local->hw, &sdata->work); 4263 } 4264 4265 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, 4266 u8 *bssid, u8 reason, bool tx) 4267 { 4268 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 4269 4270 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, 4271 tx, frame_buf); 4272 4273 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, 4274 reason); 4275 } 4276 4277 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) 4278 { 4279 struct ieee80211_local *local = sdata->local; 4280 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4281 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; 4282 u32 tx_flags = 0; 4283 u16 trans = 1; 4284 u16 status = 0; 4285 u16 prepare_tx_duration = 0; 4286 4287 sdata_assert_lock(sdata); 4288 4289 if (WARN_ON_ONCE(!auth_data)) 4290 return -EINVAL; 4291 4292 auth_data->tries++; 4293 4294 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { 4295 sdata_info(sdata, "authentication with %pM timed out\n", 4296 auth_data->bss->bssid); 4297 4298 /* 4299 * Most likely AP is not in the range so remove the 4300 * bss struct for that AP. 4301 */ 4302 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); 4303 4304 return -ETIMEDOUT; 4305 } 4306 4307 if (auth_data->algorithm == WLAN_AUTH_SAE) 4308 prepare_tx_duration = 4309 jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE); 4310 4311 drv_mgd_prepare_tx(local, sdata, prepare_tx_duration); 4312 4313 sdata_info(sdata, "send auth to %pM (try %d/%d)\n", 4314 auth_data->bss->bssid, auth_data->tries, 4315 IEEE80211_AUTH_MAX_TRIES); 4316 4317 auth_data->expected_transaction = 2; 4318 4319 if (auth_data->algorithm == WLAN_AUTH_SAE) { 4320 trans = auth_data->sae_trans; 4321 status = auth_data->sae_status; 4322 auth_data->expected_transaction = trans; 4323 } 4324 4325 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 4326 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | 4327 IEEE80211_TX_INTFL_MLME_CONN_TX; 4328 4329 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, 4330 auth_data->data, auth_data->data_len, 4331 auth_data->bss->bssid, 4332 auth_data->bss->bssid, NULL, 0, 0, 4333 tx_flags); 4334 4335 if (tx_flags == 0) { 4336 if (auth_data->algorithm == WLAN_AUTH_SAE) 4337 auth_data->timeout = jiffies + 4338 IEEE80211_AUTH_TIMEOUT_SAE; 4339 else 4340 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; 4341 } else { 4342 auth_data->timeout = 4343 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); 4344 } 4345 4346 auth_data->timeout_started = true; 4347 run_again(sdata, auth_data->timeout); 4348 4349 return 0; 4350 } 4351 4352 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) 4353 { 4354 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; 4355 struct ieee80211_local *local = sdata->local; 4356 4357 sdata_assert_lock(sdata); 4358 4359 assoc_data->tries++; 4360 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { 4361 sdata_info(sdata, "association with %pM timed out\n", 4362 assoc_data->bss->bssid); 4363 4364 /* 4365 * Most likely AP is not in the range so remove the 4366 * bss struct for that AP. 4367 */ 4368 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss); 4369 4370 return -ETIMEDOUT; 4371 } 4372 4373 sdata_info(sdata, "associate with %pM (try %d/%d)\n", 4374 assoc_data->bss->bssid, assoc_data->tries, 4375 IEEE80211_ASSOC_MAX_TRIES); 4376 ieee80211_send_assoc(sdata); 4377 4378 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { 4379 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; 4380 assoc_data->timeout_started = true; 4381 run_again(sdata, assoc_data->timeout); 4382 } else { 4383 assoc_data->timeout = 4384 round_jiffies_up(jiffies + 4385 IEEE80211_ASSOC_TIMEOUT_LONG); 4386 assoc_data->timeout_started = true; 4387 run_again(sdata, assoc_data->timeout); 4388 } 4389 4390 return 0; 4391 } 4392 4393 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, 4394 __le16 fc, bool acked) 4395 { 4396 struct ieee80211_local *local = sdata->local; 4397 4398 sdata->u.mgd.status_fc = fc; 4399 sdata->u.mgd.status_acked = acked; 4400 sdata->u.mgd.status_received = true; 4401 4402 ieee80211_queue_work(&local->hw, &sdata->work); 4403 } 4404 4405 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) 4406 { 4407 struct ieee80211_local *local = sdata->local; 4408 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4409 4410 sdata_lock(sdata); 4411 4412 if (ifmgd->status_received) { 4413 __le16 fc = ifmgd->status_fc; 4414 bool status_acked = ifmgd->status_acked; 4415 4416 ifmgd->status_received = false; 4417 if (ifmgd->auth_data && ieee80211_is_auth(fc)) { 4418 if (status_acked) { 4419 if (ifmgd->auth_data->algorithm == 4420 WLAN_AUTH_SAE) 4421 ifmgd->auth_data->timeout = 4422 jiffies + 4423 IEEE80211_AUTH_TIMEOUT_SAE; 4424 else 4425 ifmgd->auth_data->timeout = 4426 jiffies + 4427 IEEE80211_AUTH_TIMEOUT_SHORT; 4428 run_again(sdata, ifmgd->auth_data->timeout); 4429 } else { 4430 ifmgd->auth_data->timeout = jiffies - 1; 4431 } 4432 ifmgd->auth_data->timeout_started = true; 4433 } else if (ifmgd->assoc_data && 4434 (ieee80211_is_assoc_req(fc) || 4435 ieee80211_is_reassoc_req(fc))) { 4436 if (status_acked) { 4437 ifmgd->assoc_data->timeout = 4438 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; 4439 run_again(sdata, ifmgd->assoc_data->timeout); 4440 } else { 4441 ifmgd->assoc_data->timeout = jiffies - 1; 4442 } 4443 ifmgd->assoc_data->timeout_started = true; 4444 } 4445 } 4446 4447 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && 4448 time_after(jiffies, ifmgd->auth_data->timeout)) { 4449 if (ifmgd->auth_data->done) { 4450 /* 4451 * ok ... we waited for assoc but userspace didn't, 4452 * so let's just kill the auth data 4453 */ 4454 ieee80211_destroy_auth_data(sdata, false); 4455 } else if (ieee80211_auth(sdata)) { 4456 u8 bssid[ETH_ALEN]; 4457 struct ieee80211_event event = { 4458 .type = MLME_EVENT, 4459 .u.mlme.data = AUTH_EVENT, 4460 .u.mlme.status = MLME_TIMEOUT, 4461 }; 4462 4463 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); 4464 4465 ieee80211_destroy_auth_data(sdata, false); 4466 4467 cfg80211_auth_timeout(sdata->dev, bssid); 4468 drv_event_callback(sdata->local, sdata, &event); 4469 } 4470 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) 4471 run_again(sdata, ifmgd->auth_data->timeout); 4472 4473 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && 4474 time_after(jiffies, ifmgd->assoc_data->timeout)) { 4475 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) || 4476 ieee80211_do_assoc(sdata)) { 4477 struct cfg80211_bss *bss = ifmgd->assoc_data->bss; 4478 struct ieee80211_event event = { 4479 .type = MLME_EVENT, 4480 .u.mlme.data = ASSOC_EVENT, 4481 .u.mlme.status = MLME_TIMEOUT, 4482 }; 4483 4484 ieee80211_destroy_assoc_data(sdata, false, false); 4485 cfg80211_assoc_timeout(sdata->dev, bss); 4486 drv_event_callback(sdata->local, sdata, &event); 4487 } 4488 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) 4489 run_again(sdata, ifmgd->assoc_data->timeout); 4490 4491 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && 4492 ifmgd->associated) { 4493 u8 bssid[ETH_ALEN]; 4494 int max_tries; 4495 4496 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); 4497 4498 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) 4499 max_tries = max_nullfunc_tries; 4500 else 4501 max_tries = max_probe_tries; 4502 4503 /* ACK received for nullfunc probing frame */ 4504 if (!ifmgd->probe_send_count) 4505 ieee80211_reset_ap_probe(sdata); 4506 else if (ifmgd->nullfunc_failed) { 4507 if (ifmgd->probe_send_count < max_tries) { 4508 mlme_dbg(sdata, 4509 "No ack for nullfunc frame to AP %pM, try %d/%i\n", 4510 bssid, ifmgd->probe_send_count, 4511 max_tries); 4512 ieee80211_mgd_probe_ap_send(sdata); 4513 } else { 4514 mlme_dbg(sdata, 4515 "No ack for nullfunc frame to AP %pM, disconnecting.\n", 4516 bssid); 4517 ieee80211_sta_connection_lost(sdata, bssid, 4518 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, 4519 false); 4520 } 4521 } else if (time_is_after_jiffies(ifmgd->probe_timeout)) 4522 run_again(sdata, ifmgd->probe_timeout); 4523 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { 4524 mlme_dbg(sdata, 4525 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", 4526 bssid, probe_wait_ms); 4527 ieee80211_sta_connection_lost(sdata, bssid, 4528 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); 4529 } else if (ifmgd->probe_send_count < max_tries) { 4530 mlme_dbg(sdata, 4531 "No probe response from AP %pM after %dms, try %d/%i\n", 4532 bssid, probe_wait_ms, 4533 ifmgd->probe_send_count, max_tries); 4534 ieee80211_mgd_probe_ap_send(sdata); 4535 } else { 4536 /* 4537 * We actually lost the connection ... or did we? 4538 * Let's make sure! 4539 */ 4540 mlme_dbg(sdata, 4541 "No probe response from AP %pM after %dms, disconnecting.\n", 4542 bssid, probe_wait_ms); 4543 4544 ieee80211_sta_connection_lost(sdata, bssid, 4545 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); 4546 } 4547 } 4548 4549 sdata_unlock(sdata); 4550 } 4551 4552 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t) 4553 { 4554 struct ieee80211_sub_if_data *sdata = 4555 from_timer(sdata, t, u.mgd.bcn_mon_timer); 4556 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4557 4558 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) 4559 return; 4560 4561 sdata->u.mgd.connection_loss = false; 4562 ieee80211_queue_work(&sdata->local->hw, 4563 &sdata->u.mgd.beacon_connection_loss_work); 4564 } 4565 4566 static void ieee80211_sta_conn_mon_timer(struct timer_list *t) 4567 { 4568 struct ieee80211_sub_if_data *sdata = 4569 from_timer(sdata, t, u.mgd.conn_mon_timer); 4570 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4571 struct ieee80211_local *local = sdata->local; 4572 4573 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) 4574 return; 4575 4576 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); 4577 } 4578 4579 static void ieee80211_sta_monitor_work(struct work_struct *work) 4580 { 4581 struct ieee80211_sub_if_data *sdata = 4582 container_of(work, struct ieee80211_sub_if_data, 4583 u.mgd.monitor_work); 4584 4585 ieee80211_mgd_probe_ap(sdata, false); 4586 } 4587 4588 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) 4589 { 4590 if (sdata->vif.type == NL80211_IFTYPE_STATION) { 4591 __ieee80211_stop_poll(sdata); 4592 4593 /* let's probe the connection once */ 4594 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) 4595 ieee80211_queue_work(&sdata->local->hw, 4596 &sdata->u.mgd.monitor_work); 4597 } 4598 } 4599 4600 #ifdef CONFIG_PM 4601 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) 4602 { 4603 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4604 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 4605 4606 sdata_lock(sdata); 4607 4608 if (ifmgd->auth_data || ifmgd->assoc_data) { 4609 const u8 *bssid = ifmgd->auth_data ? 4610 ifmgd->auth_data->bss->bssid : 4611 ifmgd->assoc_data->bss->bssid; 4612 4613 /* 4614 * If we are trying to authenticate / associate while suspending, 4615 * cfg80211 won't know and won't actually abort those attempts, 4616 * thus we need to do that ourselves. 4617 */ 4618 ieee80211_send_deauth_disassoc(sdata, bssid, bssid, 4619 IEEE80211_STYPE_DEAUTH, 4620 WLAN_REASON_DEAUTH_LEAVING, 4621 false, frame_buf); 4622 if (ifmgd->assoc_data) 4623 ieee80211_destroy_assoc_data(sdata, false, true); 4624 if (ifmgd->auth_data) 4625 ieee80211_destroy_auth_data(sdata, false); 4626 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, 4627 IEEE80211_DEAUTH_FRAME_LEN); 4628 } 4629 4630 /* This is a bit of a hack - we should find a better and more generic 4631 * solution to this. Normally when suspending, cfg80211 will in fact 4632 * deauthenticate. However, it doesn't (and cannot) stop an ongoing 4633 * auth (not so important) or assoc (this is the problem) process. 4634 * 4635 * As a consequence, it can happen that we are in the process of both 4636 * associating and suspending, and receive an association response 4637 * after cfg80211 has checked if it needs to disconnect, but before 4638 * we actually set the flag to drop incoming frames. This will then 4639 * cause the workqueue flush to process the association response in 4640 * the suspend, resulting in a successful association just before it 4641 * tries to remove the interface from the driver, which now though 4642 * has a channel context assigned ... this results in issues. 4643 * 4644 * To work around this (for now) simply deauth here again if we're 4645 * now connected. 4646 */ 4647 if (ifmgd->associated && !sdata->local->wowlan) { 4648 u8 bssid[ETH_ALEN]; 4649 struct cfg80211_deauth_request req = { 4650 .reason_code = WLAN_REASON_DEAUTH_LEAVING, 4651 .bssid = bssid, 4652 }; 4653 4654 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); 4655 ieee80211_mgd_deauth(sdata, &req); 4656 } 4657 4658 sdata_unlock(sdata); 4659 } 4660 4661 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) 4662 { 4663 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4664 4665 sdata_lock(sdata); 4666 if (!ifmgd->associated) { 4667 sdata_unlock(sdata); 4668 return; 4669 } 4670 4671 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { 4672 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; 4673 mlme_dbg(sdata, "driver requested disconnect after resume\n"); 4674 ieee80211_sta_connection_lost(sdata, 4675 ifmgd->associated->bssid, 4676 WLAN_REASON_UNSPECIFIED, 4677 true); 4678 sdata_unlock(sdata); 4679 return; 4680 } 4681 sdata_unlock(sdata); 4682 } 4683 #endif 4684 4685 /* interface setup */ 4686 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) 4687 { 4688 struct ieee80211_if_managed *ifmgd; 4689 4690 ifmgd = &sdata->u.mgd; 4691 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); 4692 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); 4693 INIT_WORK(&ifmgd->beacon_connection_loss_work, 4694 ieee80211_beacon_connection_loss_work); 4695 INIT_WORK(&ifmgd->csa_connection_drop_work, 4696 ieee80211_csa_connection_drop_work); 4697 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work); 4698 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work, 4699 ieee80211_tdls_peer_del_work); 4700 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0); 4701 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0); 4702 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0); 4703 timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0); 4704 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk, 4705 ieee80211_sta_handle_tspec_ac_params_wk); 4706 4707 ifmgd->flags = 0; 4708 ifmgd->powersave = sdata->wdev.ps; 4709 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; 4710 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; 4711 ifmgd->p2p_noa_index = -1; 4712 4713 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) 4714 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC; 4715 else 4716 ifmgd->req_smps = IEEE80211_SMPS_OFF; 4717 4718 /* Setup TDLS data */ 4719 spin_lock_init(&ifmgd->teardown_lock); 4720 ifmgd->teardown_skb = NULL; 4721 ifmgd->orig_teardown_skb = NULL; 4722 } 4723 4724 /* scan finished notification */ 4725 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) 4726 { 4727 struct ieee80211_sub_if_data *sdata; 4728 4729 /* Restart STA timers */ 4730 rcu_read_lock(); 4731 list_for_each_entry_rcu(sdata, &local->interfaces, list) { 4732 if (ieee80211_sdata_running(sdata)) 4733 ieee80211_restart_sta_timer(sdata); 4734 } 4735 rcu_read_unlock(); 4736 } 4737 4738 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, 4739 struct cfg80211_bss *cbss) 4740 { 4741 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4742 const u8 *ht_cap_ie, *vht_cap_ie; 4743 const struct ieee80211_ht_cap *ht_cap; 4744 const struct ieee80211_vht_cap *vht_cap; 4745 u8 chains = 1; 4746 4747 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT) 4748 return chains; 4749 4750 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); 4751 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) { 4752 ht_cap = (void *)(ht_cap_ie + 2); 4753 chains = ieee80211_mcs_to_chains(&ht_cap->mcs); 4754 /* 4755 * TODO: use "Tx Maximum Number Spatial Streams Supported" and 4756 * "Tx Unequal Modulation Supported" fields. 4757 */ 4758 } 4759 4760 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) 4761 return chains; 4762 4763 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); 4764 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) { 4765 u8 nss; 4766 u16 tx_mcs_map; 4767 4768 vht_cap = (void *)(vht_cap_ie + 2); 4769 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); 4770 for (nss = 8; nss > 0; nss--) { 4771 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != 4772 IEEE80211_VHT_MCS_NOT_SUPPORTED) 4773 break; 4774 } 4775 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ 4776 chains = max(chains, nss); 4777 } 4778 4779 return chains; 4780 } 4781 4782 static bool 4783 ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband, 4784 const struct ieee80211_he_operation *he_op) 4785 { 4786 const struct ieee80211_sta_he_cap *sta_he_cap = 4787 ieee80211_get_he_sta_cap(sband); 4788 u16 ap_min_req_set; 4789 int i; 4790 4791 if (!sta_he_cap || !he_op) 4792 return false; 4793 4794 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); 4795 4796 /* Need to go over for 80MHz, 160MHz and for 80+80 */ 4797 for (i = 0; i < 3; i++) { 4798 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = 4799 &sta_he_cap->he_mcs_nss_supp; 4800 u16 sta_mcs_map_rx = 4801 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); 4802 u16 sta_mcs_map_tx = 4803 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); 4804 u8 nss; 4805 bool verified = true; 4806 4807 /* 4808 * For each band there is a maximum of 8 spatial streams 4809 * possible. Each of the sta_mcs_map_* is a 16-bit struct built 4810 * of 2 bits per NSS (1-8), with the values defined in enum 4811 * ieee80211_he_mcs_support. Need to make sure STA TX and RX 4812 * capabilities aren't less than the AP's minimum requirements 4813 * for this HE BSS per SS. 4814 * It is enough to find one such band that meets the reqs. 4815 */ 4816 for (nss = 8; nss > 0; nss--) { 4817 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; 4818 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; 4819 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; 4820 4821 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) 4822 continue; 4823 4824 /* 4825 * Make sure the HE AP doesn't require MCSs that aren't 4826 * supported by the client 4827 */ 4828 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || 4829 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || 4830 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { 4831 verified = false; 4832 break; 4833 } 4834 } 4835 4836 if (verified) 4837 return true; 4838 } 4839 4840 /* If here, STA doesn't meet AP's HE min requirements */ 4841 return false; 4842 } 4843 4844 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, 4845 struct cfg80211_bss *cbss) 4846 { 4847 struct ieee80211_local *local = sdata->local; 4848 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 4849 const struct ieee80211_ht_cap *ht_cap = NULL; 4850 const struct ieee80211_ht_operation *ht_oper = NULL; 4851 const struct ieee80211_vht_operation *vht_oper = NULL; 4852 const struct ieee80211_he_operation *he_oper = NULL; 4853 struct ieee80211_supported_band *sband; 4854 struct cfg80211_chan_def chandef; 4855 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; 4856 struct ieee80211_bss *bss = (void *)cbss->priv; 4857 int ret; 4858 u32 i; 4859 bool have_80mhz; 4860 4861 sband = local->hw.wiphy->bands[cbss->channel->band]; 4862 4863 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ | 4864 IEEE80211_STA_DISABLE_80P80MHZ | 4865 IEEE80211_STA_DISABLE_160MHZ); 4866 4867 /* disable HT/VHT/HE if we don't support them */ 4868 if (!sband->ht_cap.ht_supported && !is_6ghz) { 4869 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 4870 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4871 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4872 } 4873 4874 if (!sband->vht_cap.vht_supported && !is_6ghz) { 4875 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4876 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4877 } 4878 4879 if (!ieee80211_get_he_sta_cap(sband)) 4880 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4881 4882 rcu_read_lock(); 4883 4884 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) { 4885 const u8 *ht_oper_ie, *ht_cap_ie; 4886 4887 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); 4888 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) 4889 ht_oper = (void *)(ht_oper_ie + 2); 4890 4891 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); 4892 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) 4893 ht_cap = (void *)(ht_cap_ie + 2); 4894 4895 if (!ht_cap) { 4896 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 4897 ht_oper = NULL; 4898 } 4899 } 4900 4901 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && !is_6ghz) { 4902 const u8 *vht_oper_ie, *vht_cap; 4903 4904 vht_oper_ie = ieee80211_bss_get_ie(cbss, 4905 WLAN_EID_VHT_OPERATION); 4906 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper)) 4907 vht_oper = (void *)(vht_oper_ie + 2); 4908 if (vht_oper && !ht_oper) { 4909 vht_oper = NULL; 4910 sdata_info(sdata, 4911 "AP advertised VHT without HT, disabling HT/VHT/HE\n"); 4912 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 4913 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4914 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4915 } 4916 4917 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); 4918 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { 4919 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4920 vht_oper = NULL; 4921 } 4922 } 4923 4924 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) { 4925 const struct cfg80211_bss_ies *ies; 4926 const u8 *he_oper_ie; 4927 4928 ies = rcu_dereference(cbss->ies); 4929 he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION, 4930 ies->data, ies->len); 4931 if (he_oper_ie && 4932 he_oper_ie[1] == ieee80211_he_oper_size(&he_oper_ie[3])) 4933 he_oper = (void *)(he_oper_ie + 3); 4934 else 4935 he_oper = NULL; 4936 4937 if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper)) 4938 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 4939 } 4940 4941 /* Allow VHT if at least one channel on the sband supports 80 MHz */ 4942 have_80mhz = false; 4943 for (i = 0; i < sband->n_channels; i++) { 4944 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | 4945 IEEE80211_CHAN_NO_80MHZ)) 4946 continue; 4947 4948 have_80mhz = true; 4949 break; 4950 } 4951 4952 if (!have_80mhz) 4953 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 4954 4955 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, 4956 cbss->channel, 4957 bss->vht_cap_info, 4958 ht_oper, vht_oper, he_oper, 4959 &chandef, false); 4960 4961 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), 4962 local->rx_chains); 4963 4964 rcu_read_unlock(); 4965 4966 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE && is_6ghz) { 4967 sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection"); 4968 return -EINVAL; 4969 } 4970 4971 /* will change later if needed */ 4972 sdata->smps_mode = IEEE80211_SMPS_OFF; 4973 4974 mutex_lock(&local->mtx); 4975 /* 4976 * If this fails (possibly due to channel context sharing 4977 * on incompatible channels, e.g. 80+80 and 160 sharing the 4978 * same control channel) try to use a smaller bandwidth. 4979 */ 4980 ret = ieee80211_vif_use_channel(sdata, &chandef, 4981 IEEE80211_CHANCTX_SHARED); 4982 4983 /* don't downgrade for 5 and 10 MHz channels, though. */ 4984 if (chandef.width == NL80211_CHAN_WIDTH_5 || 4985 chandef.width == NL80211_CHAN_WIDTH_10) 4986 goto out; 4987 4988 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { 4989 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef); 4990 ret = ieee80211_vif_use_channel(sdata, &chandef, 4991 IEEE80211_CHANCTX_SHARED); 4992 } 4993 out: 4994 mutex_unlock(&local->mtx); 4995 return ret; 4996 } 4997 4998 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies, 4999 u8 *dtim_count, u8 *dtim_period) 5000 { 5001 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len); 5002 const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data, 5003 ies->len); 5004 const struct ieee80211_tim_ie *tim = NULL; 5005 const struct ieee80211_bssid_index *idx; 5006 bool valid = tim_ie && tim_ie[1] >= 2; 5007 5008 if (valid) 5009 tim = (void *)(tim_ie + 2); 5010 5011 if (dtim_count) 5012 *dtim_count = valid ? tim->dtim_count : 0; 5013 5014 if (dtim_period) 5015 *dtim_period = valid ? tim->dtim_period : 0; 5016 5017 /* Check if value is overridden by non-transmitted profile */ 5018 if (!idx_ie || idx_ie[1] < 3) 5019 return valid; 5020 5021 idx = (void *)(idx_ie + 2); 5022 5023 if (dtim_count) 5024 *dtim_count = idx->dtim_count; 5025 5026 if (dtim_period) 5027 *dtim_period = idx->dtim_period; 5028 5029 return true; 5030 } 5031 5032 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, 5033 struct cfg80211_bss *cbss, bool assoc, 5034 bool override) 5035 { 5036 struct ieee80211_local *local = sdata->local; 5037 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5038 struct ieee80211_bss *bss = (void *)cbss->priv; 5039 struct sta_info *new_sta = NULL; 5040 struct ieee80211_supported_band *sband; 5041 bool have_sta = false; 5042 int err; 5043 5044 sband = local->hw.wiphy->bands[cbss->channel->band]; 5045 5046 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) 5047 return -EINVAL; 5048 5049 /* If a reconfig is happening, bail out */ 5050 if (local->in_reconfig) 5051 return -EBUSY; 5052 5053 if (assoc) { 5054 rcu_read_lock(); 5055 have_sta = sta_info_get(sdata, cbss->bssid); 5056 rcu_read_unlock(); 5057 } 5058 5059 if (!have_sta) { 5060 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); 5061 if (!new_sta) 5062 return -ENOMEM; 5063 } 5064 5065 /* 5066 * Set up the information for the new channel before setting the 5067 * new channel. We can't - completely race-free - change the basic 5068 * rates bitmap and the channel (sband) that it refers to, but if 5069 * we set it up before we at least avoid calling into the driver's 5070 * bss_info_changed() method with invalid information (since we do 5071 * call that from changing the channel - only for IDLE and perhaps 5072 * some others, but ...). 5073 * 5074 * So to avoid that, just set up all the new information before the 5075 * channel, but tell the driver to apply it only afterwards, since 5076 * it might need the new channel for that. 5077 */ 5078 if (new_sta) { 5079 u32 rates = 0, basic_rates = 0; 5080 bool have_higher_than_11mbit; 5081 int min_rate = INT_MAX, min_rate_index = -1; 5082 const struct cfg80211_bss_ies *ies; 5083 int shift = ieee80211_vif_get_shift(&sdata->vif); 5084 5085 ieee80211_get_rates(sband, bss->supp_rates, 5086 bss->supp_rates_len, 5087 &rates, &basic_rates, 5088 &have_higher_than_11mbit, 5089 &min_rate, &min_rate_index, 5090 shift); 5091 5092 /* 5093 * This used to be a workaround for basic rates missing 5094 * in the association response frame. Now that we no 5095 * longer use the basic rates from there, it probably 5096 * doesn't happen any more, but keep the workaround so 5097 * in case some *other* APs are buggy in different ways 5098 * we can connect -- with a warning. 5099 * Allow this workaround only in case the AP provided at least 5100 * one rate. 5101 */ 5102 if (min_rate_index < 0) { 5103 sdata_info(sdata, 5104 "No legacy rates in association response\n"); 5105 5106 sta_info_free(local, new_sta); 5107 return -EINVAL; 5108 } else if (!basic_rates) { 5109 sdata_info(sdata, 5110 "No basic rates, using min rate instead\n"); 5111 basic_rates = BIT(min_rate_index); 5112 } 5113 5114 if (rates) 5115 new_sta->sta.supp_rates[cbss->channel->band] = rates; 5116 else 5117 sdata_info(sdata, 5118 "No rates found, keeping mandatory only\n"); 5119 5120 sdata->vif.bss_conf.basic_rates = basic_rates; 5121 5122 /* cf. IEEE 802.11 9.2.12 */ 5123 if (cbss->channel->band == NL80211_BAND_2GHZ && 5124 have_higher_than_11mbit) 5125 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; 5126 else 5127 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; 5128 5129 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN); 5130 5131 /* set timing information */ 5132 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; 5133 rcu_read_lock(); 5134 ies = rcu_dereference(cbss->beacon_ies); 5135 if (ies) { 5136 sdata->vif.bss_conf.sync_tsf = ies->tsf; 5137 sdata->vif.bss_conf.sync_device_ts = 5138 bss->device_ts_beacon; 5139 5140 ieee80211_get_dtim(ies, 5141 &sdata->vif.bss_conf.sync_dtim_count, 5142 NULL); 5143 } else if (!ieee80211_hw_check(&sdata->local->hw, 5144 TIMING_BEACON_ONLY)) { 5145 ies = rcu_dereference(cbss->proberesp_ies); 5146 /* must be non-NULL since beacon IEs were NULL */ 5147 sdata->vif.bss_conf.sync_tsf = ies->tsf; 5148 sdata->vif.bss_conf.sync_device_ts = 5149 bss->device_ts_presp; 5150 sdata->vif.bss_conf.sync_dtim_count = 0; 5151 } else { 5152 sdata->vif.bss_conf.sync_tsf = 0; 5153 sdata->vif.bss_conf.sync_device_ts = 0; 5154 sdata->vif.bss_conf.sync_dtim_count = 0; 5155 } 5156 rcu_read_unlock(); 5157 } 5158 5159 if (new_sta || override) { 5160 err = ieee80211_prep_channel(sdata, cbss); 5161 if (err) { 5162 if (new_sta) 5163 sta_info_free(local, new_sta); 5164 return -EINVAL; 5165 } 5166 } 5167 5168 if (new_sta) { 5169 /* 5170 * tell driver about BSSID, basic rates and timing 5171 * this was set up above, before setting the channel 5172 */ 5173 ieee80211_bss_info_change_notify(sdata, 5174 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES | 5175 BSS_CHANGED_BEACON_INT); 5176 5177 if (assoc) 5178 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); 5179 5180 err = sta_info_insert(new_sta); 5181 new_sta = NULL; 5182 if (err) { 5183 sdata_info(sdata, 5184 "failed to insert STA entry for the AP (error %d)\n", 5185 err); 5186 return err; 5187 } 5188 } else 5189 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid)); 5190 5191 /* Cancel scan to ensure that nothing interferes with connection */ 5192 if (local->scanning) 5193 ieee80211_scan_cancel(local); 5194 5195 return 0; 5196 } 5197 5198 /* config hooks */ 5199 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, 5200 struct cfg80211_auth_request *req) 5201 { 5202 struct ieee80211_local *local = sdata->local; 5203 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5204 struct ieee80211_mgd_auth_data *auth_data; 5205 u16 auth_alg; 5206 int err; 5207 bool cont_auth; 5208 5209 /* prepare auth data structure */ 5210 5211 switch (req->auth_type) { 5212 case NL80211_AUTHTYPE_OPEN_SYSTEM: 5213 auth_alg = WLAN_AUTH_OPEN; 5214 break; 5215 case NL80211_AUTHTYPE_SHARED_KEY: 5216 if (fips_enabled) 5217 return -EOPNOTSUPP; 5218 auth_alg = WLAN_AUTH_SHARED_KEY; 5219 break; 5220 case NL80211_AUTHTYPE_FT: 5221 auth_alg = WLAN_AUTH_FT; 5222 break; 5223 case NL80211_AUTHTYPE_NETWORK_EAP: 5224 auth_alg = WLAN_AUTH_LEAP; 5225 break; 5226 case NL80211_AUTHTYPE_SAE: 5227 auth_alg = WLAN_AUTH_SAE; 5228 break; 5229 case NL80211_AUTHTYPE_FILS_SK: 5230 auth_alg = WLAN_AUTH_FILS_SK; 5231 break; 5232 case NL80211_AUTHTYPE_FILS_SK_PFS: 5233 auth_alg = WLAN_AUTH_FILS_SK_PFS; 5234 break; 5235 case NL80211_AUTHTYPE_FILS_PK: 5236 auth_alg = WLAN_AUTH_FILS_PK; 5237 break; 5238 default: 5239 return -EOPNOTSUPP; 5240 } 5241 5242 if (ifmgd->assoc_data) 5243 return -EBUSY; 5244 5245 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + 5246 req->ie_len, GFP_KERNEL); 5247 if (!auth_data) 5248 return -ENOMEM; 5249 5250 auth_data->bss = req->bss; 5251 5252 if (req->auth_data_len >= 4) { 5253 if (req->auth_type == NL80211_AUTHTYPE_SAE) { 5254 __le16 *pos = (__le16 *) req->auth_data; 5255 5256 auth_data->sae_trans = le16_to_cpu(pos[0]); 5257 auth_data->sae_status = le16_to_cpu(pos[1]); 5258 } 5259 memcpy(auth_data->data, req->auth_data + 4, 5260 req->auth_data_len - 4); 5261 auth_data->data_len += req->auth_data_len - 4; 5262 } 5263 5264 /* Check if continuing authentication or trying to authenticate with the 5265 * same BSS that we were in the process of authenticating with and avoid 5266 * removal and re-addition of the STA entry in 5267 * ieee80211_prep_connection(). 5268 */ 5269 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss; 5270 5271 if (req->ie && req->ie_len) { 5272 memcpy(&auth_data->data[auth_data->data_len], 5273 req->ie, req->ie_len); 5274 auth_data->data_len += req->ie_len; 5275 } 5276 5277 if (req->key && req->key_len) { 5278 auth_data->key_len = req->key_len; 5279 auth_data->key_idx = req->key_idx; 5280 memcpy(auth_data->key, req->key, req->key_len); 5281 } 5282 5283 auth_data->algorithm = auth_alg; 5284 5285 /* try to authenticate/probe */ 5286 5287 if (ifmgd->auth_data) { 5288 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) { 5289 auth_data->peer_confirmed = 5290 ifmgd->auth_data->peer_confirmed; 5291 } 5292 ieee80211_destroy_auth_data(sdata, cont_auth); 5293 } 5294 5295 /* prep auth_data so we don't go into idle on disassoc */ 5296 ifmgd->auth_data = auth_data; 5297 5298 /* If this is continuation of an ongoing SAE authentication exchange 5299 * (i.e., request to send SAE Confirm) and the peer has already 5300 * confirmed, mark authentication completed since we are about to send 5301 * out SAE Confirm. 5302 */ 5303 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE && 5304 auth_data->peer_confirmed && auth_data->sae_trans == 2) 5305 ieee80211_mark_sta_auth(sdata, req->bss->bssid); 5306 5307 if (ifmgd->associated) { 5308 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5309 5310 sdata_info(sdata, 5311 "disconnect from AP %pM for new auth to %pM\n", 5312 ifmgd->associated->bssid, req->bss->bssid); 5313 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5314 WLAN_REASON_UNSPECIFIED, 5315 false, frame_buf); 5316 5317 ieee80211_report_disconnect(sdata, frame_buf, 5318 sizeof(frame_buf), true, 5319 WLAN_REASON_UNSPECIFIED); 5320 } 5321 5322 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid); 5323 5324 err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false); 5325 if (err) 5326 goto err_clear; 5327 5328 err = ieee80211_auth(sdata); 5329 if (err) { 5330 sta_info_destroy_addr(sdata, req->bss->bssid); 5331 goto err_clear; 5332 } 5333 5334 /* hold our own reference */ 5335 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); 5336 return 0; 5337 5338 err_clear: 5339 eth_zero_addr(ifmgd->bssid); 5340 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 5341 ifmgd->auth_data = NULL; 5342 mutex_lock(&sdata->local->mtx); 5343 ieee80211_vif_release_channel(sdata); 5344 mutex_unlock(&sdata->local->mtx); 5345 kfree(auth_data); 5346 return err; 5347 } 5348 5349 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, 5350 struct cfg80211_assoc_request *req) 5351 { 5352 bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ; 5353 struct ieee80211_local *local = sdata->local; 5354 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5355 struct ieee80211_bss *bss = (void *)req->bss->priv; 5356 struct ieee80211_mgd_assoc_data *assoc_data; 5357 const struct cfg80211_bss_ies *beacon_ies; 5358 struct ieee80211_supported_band *sband; 5359 const u8 *ssidie, *ht_ie, *vht_ie; 5360 int i, err; 5361 bool override = false; 5362 5363 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); 5364 if (!assoc_data) 5365 return -ENOMEM; 5366 5367 rcu_read_lock(); 5368 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID); 5369 if (!ssidie || ssidie[1] > sizeof(assoc_data->ssid)) { 5370 rcu_read_unlock(); 5371 kfree(assoc_data); 5372 return -EINVAL; 5373 } 5374 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]); 5375 assoc_data->ssid_len = ssidie[1]; 5376 rcu_read_unlock(); 5377 5378 if (ifmgd->associated) { 5379 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5380 5381 sdata_info(sdata, 5382 "disconnect from AP %pM for new assoc to %pM\n", 5383 ifmgd->associated->bssid, req->bss->bssid); 5384 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5385 WLAN_REASON_UNSPECIFIED, 5386 false, frame_buf); 5387 5388 ieee80211_report_disconnect(sdata, frame_buf, 5389 sizeof(frame_buf), true, 5390 WLAN_REASON_UNSPECIFIED); 5391 } 5392 5393 if (ifmgd->auth_data && !ifmgd->auth_data->done) { 5394 err = -EBUSY; 5395 goto err_free; 5396 } 5397 5398 if (ifmgd->assoc_data) { 5399 err = -EBUSY; 5400 goto err_free; 5401 } 5402 5403 if (ifmgd->auth_data) { 5404 bool match; 5405 5406 /* keep sta info, bssid if matching */ 5407 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid); 5408 ieee80211_destroy_auth_data(sdata, match); 5409 } 5410 5411 /* prepare assoc data */ 5412 5413 ifmgd->beacon_crc_valid = false; 5414 5415 assoc_data->wmm = bss->wmm_used && 5416 (local->hw.queues >= IEEE80211_NUM_ACS); 5417 5418 /* 5419 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. 5420 * We still associate in non-HT mode (11a/b/g) if any one of these 5421 * ciphers is configured as pairwise. 5422 * We can set this to true for non-11n hardware, that'll be checked 5423 * separately along with the peer capabilities. 5424 */ 5425 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { 5426 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || 5427 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || 5428 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { 5429 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5430 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5431 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 5432 netdev_info(sdata->dev, 5433 "disabling HT/VHT/HE due to WEP/TKIP use\n"); 5434 } 5435 } 5436 5437 sband = local->hw.wiphy->bands[req->bss->channel->band]; 5438 5439 /* also disable HT/VHT/HE if the AP doesn't use WMM */ 5440 if (!bss->wmm_used) { 5441 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5442 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5443 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 5444 netdev_info(sdata->dev, 5445 "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n"); 5446 } 5447 5448 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); 5449 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, 5450 sizeof(ifmgd->ht_capa_mask)); 5451 5452 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); 5453 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, 5454 sizeof(ifmgd->vht_capa_mask)); 5455 5456 if (req->ie && req->ie_len) { 5457 memcpy(assoc_data->ie, req->ie, req->ie_len); 5458 assoc_data->ie_len = req->ie_len; 5459 } 5460 5461 if (req->fils_kek) { 5462 /* should already be checked in cfg80211 - so warn */ 5463 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { 5464 err = -EINVAL; 5465 goto err_free; 5466 } 5467 memcpy(assoc_data->fils_kek, req->fils_kek, 5468 req->fils_kek_len); 5469 assoc_data->fils_kek_len = req->fils_kek_len; 5470 } 5471 5472 if (req->fils_nonces) 5473 memcpy(assoc_data->fils_nonces, req->fils_nonces, 5474 2 * FILS_NONCE_LEN); 5475 5476 assoc_data->bss = req->bss; 5477 5478 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) { 5479 if (ifmgd->powersave) 5480 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; 5481 else 5482 sdata->smps_mode = IEEE80211_SMPS_OFF; 5483 } else 5484 sdata->smps_mode = ifmgd->req_smps; 5485 5486 assoc_data->capability = req->bss->capability; 5487 assoc_data->supp_rates = bss->supp_rates; 5488 assoc_data->supp_rates_len = bss->supp_rates_len; 5489 5490 rcu_read_lock(); 5491 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION); 5492 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation)) 5493 assoc_data->ap_ht_param = 5494 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; 5495 else if (!is_6ghz) 5496 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5497 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); 5498 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) 5499 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, 5500 sizeof(struct ieee80211_vht_cap)); 5501 else if (!is_6ghz) 5502 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT | 5503 IEEE80211_STA_DISABLE_HE; 5504 rcu_read_unlock(); 5505 5506 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && 5507 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), 5508 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) 5509 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; 5510 5511 if (bss->wmm_used && bss->uapsd_supported && 5512 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { 5513 assoc_data->uapsd = true; 5514 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; 5515 } else { 5516 assoc_data->uapsd = false; 5517 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; 5518 } 5519 5520 if (req->prev_bssid) 5521 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN); 5522 5523 if (req->use_mfp) { 5524 ifmgd->mfp = IEEE80211_MFP_REQUIRED; 5525 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; 5526 } else { 5527 ifmgd->mfp = IEEE80211_MFP_DISABLED; 5528 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; 5529 } 5530 5531 if (req->flags & ASSOC_REQ_USE_RRM) 5532 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; 5533 else 5534 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; 5535 5536 if (req->crypto.control_port) 5537 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; 5538 else 5539 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; 5540 5541 sdata->control_port_protocol = req->crypto.control_port_ethertype; 5542 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; 5543 sdata->control_port_over_nl80211 = 5544 req->crypto.control_port_over_nl80211; 5545 sdata->control_port_no_preauth = req->crypto.control_port_no_preauth; 5546 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto, 5547 sdata->vif.type); 5548 5549 /* kick off associate process */ 5550 5551 ifmgd->assoc_data = assoc_data; 5552 ifmgd->dtim_period = 0; 5553 ifmgd->have_beacon = false; 5554 5555 /* override HT/VHT configuration only if the AP and we support it */ 5556 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { 5557 struct ieee80211_sta_ht_cap sta_ht_cap; 5558 5559 if (req->flags & ASSOC_REQ_DISABLE_HT) 5560 override = true; 5561 5562 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); 5563 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); 5564 5565 /* check for 40 MHz disable override */ 5566 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) && 5567 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && 5568 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) 5569 override = true; 5570 5571 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && 5572 req->flags & ASSOC_REQ_DISABLE_VHT) 5573 override = true; 5574 } 5575 5576 if (req->flags & ASSOC_REQ_DISABLE_HT) { 5577 ifmgd->flags |= IEEE80211_STA_DISABLE_HT; 5578 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5579 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; 5580 } 5581 5582 if (req->flags & ASSOC_REQ_DISABLE_VHT) 5583 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; 5584 5585 err = ieee80211_prep_connection(sdata, req->bss, true, override); 5586 if (err) 5587 goto err_clear; 5588 5589 rcu_read_lock(); 5590 beacon_ies = rcu_dereference(req->bss->beacon_ies); 5591 5592 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) && 5593 !beacon_ies) { 5594 /* 5595 * Wait up to one beacon interval ... 5596 * should this be more if we miss one? 5597 */ 5598 sdata_info(sdata, "waiting for beacon from %pM\n", 5599 ifmgd->bssid); 5600 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); 5601 assoc_data->timeout_started = true; 5602 assoc_data->need_beacon = true; 5603 } else if (beacon_ies) { 5604 const struct element *elem; 5605 u8 dtim_count = 0; 5606 5607 ieee80211_get_dtim(beacon_ies, &dtim_count, 5608 &ifmgd->dtim_period); 5609 5610 ifmgd->have_beacon = true; 5611 assoc_data->timeout = jiffies; 5612 assoc_data->timeout_started = true; 5613 5614 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { 5615 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; 5616 sdata->vif.bss_conf.sync_device_ts = 5617 bss->device_ts_beacon; 5618 sdata->vif.bss_conf.sync_dtim_count = dtim_count; 5619 } 5620 5621 elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, 5622 beacon_ies->data, beacon_ies->len); 5623 if (elem && elem->datalen >= 3) 5624 sdata->vif.bss_conf.profile_periodicity = elem->data[2]; 5625 5626 elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, 5627 beacon_ies->data, beacon_ies->len); 5628 if (elem && elem->datalen >= 11 && 5629 (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) 5630 sdata->vif.bss_conf.ema_ap = true; 5631 } else { 5632 assoc_data->timeout = jiffies; 5633 assoc_data->timeout_started = true; 5634 } 5635 rcu_read_unlock(); 5636 5637 run_again(sdata, assoc_data->timeout); 5638 5639 if (bss->corrupt_data) { 5640 char *corrupt_type = "data"; 5641 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { 5642 if (bss->corrupt_data & 5643 IEEE80211_BSS_CORRUPT_PROBE_RESP) 5644 corrupt_type = "beacon and probe response"; 5645 else 5646 corrupt_type = "beacon"; 5647 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) 5648 corrupt_type = "probe response"; 5649 sdata_info(sdata, "associating with AP with corrupt %s\n", 5650 corrupt_type); 5651 } 5652 5653 return 0; 5654 err_clear: 5655 eth_zero_addr(ifmgd->bssid); 5656 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); 5657 ifmgd->assoc_data = NULL; 5658 err_free: 5659 kfree(assoc_data); 5660 return err; 5661 } 5662 5663 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, 5664 struct cfg80211_deauth_request *req) 5665 { 5666 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5667 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5668 bool tx = !req->local_state_change; 5669 5670 if (ifmgd->auth_data && 5671 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) { 5672 sdata_info(sdata, 5673 "aborting authentication with %pM by local choice (Reason: %u=%s)\n", 5674 req->bssid, req->reason_code, 5675 ieee80211_get_reason_code_string(req->reason_code)); 5676 5677 drv_mgd_prepare_tx(sdata->local, sdata, 0); 5678 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, 5679 IEEE80211_STYPE_DEAUTH, 5680 req->reason_code, tx, 5681 frame_buf); 5682 ieee80211_destroy_auth_data(sdata, false); 5683 ieee80211_report_disconnect(sdata, frame_buf, 5684 sizeof(frame_buf), true, 5685 req->reason_code); 5686 5687 return 0; 5688 } 5689 5690 if (ifmgd->assoc_data && 5691 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) { 5692 sdata_info(sdata, 5693 "aborting association with %pM by local choice (Reason: %u=%s)\n", 5694 req->bssid, req->reason_code, 5695 ieee80211_get_reason_code_string(req->reason_code)); 5696 5697 drv_mgd_prepare_tx(sdata->local, sdata, 0); 5698 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, 5699 IEEE80211_STYPE_DEAUTH, 5700 req->reason_code, tx, 5701 frame_buf); 5702 ieee80211_destroy_assoc_data(sdata, false, true); 5703 ieee80211_report_disconnect(sdata, frame_buf, 5704 sizeof(frame_buf), true, 5705 req->reason_code); 5706 return 0; 5707 } 5708 5709 if (ifmgd->associated && 5710 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { 5711 sdata_info(sdata, 5712 "deauthenticating from %pM by local choice (Reason: %u=%s)\n", 5713 req->bssid, req->reason_code, 5714 ieee80211_get_reason_code_string(req->reason_code)); 5715 5716 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, 5717 req->reason_code, tx, frame_buf); 5718 ieee80211_report_disconnect(sdata, frame_buf, 5719 sizeof(frame_buf), true, 5720 req->reason_code); 5721 return 0; 5722 } 5723 5724 return -ENOTCONN; 5725 } 5726 5727 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, 5728 struct cfg80211_disassoc_request *req) 5729 { 5730 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5731 u8 bssid[ETH_ALEN]; 5732 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; 5733 5734 /* 5735 * cfg80211 should catch this ... but it's racy since 5736 * we can receive a disassoc frame, process it, hand it 5737 * to cfg80211 while that's in a locked section already 5738 * trying to tell us that the user wants to disconnect. 5739 */ 5740 if (ifmgd->associated != req->bss) 5741 return -ENOLINK; 5742 5743 sdata_info(sdata, 5744 "disassociating from %pM by local choice (Reason: %u=%s)\n", 5745 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); 5746 5747 memcpy(bssid, req->bss->bssid, ETH_ALEN); 5748 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, 5749 req->reason_code, !req->local_state_change, 5750 frame_buf); 5751 5752 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, 5753 req->reason_code); 5754 5755 return 0; 5756 } 5757 5758 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) 5759 { 5760 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; 5761 5762 /* 5763 * Make sure some work items will not run after this, 5764 * they will not do anything but might not have been 5765 * cancelled when disconnecting. 5766 */ 5767 cancel_work_sync(&ifmgd->monitor_work); 5768 cancel_work_sync(&ifmgd->beacon_connection_loss_work); 5769 cancel_work_sync(&ifmgd->request_smps_work); 5770 cancel_work_sync(&ifmgd->csa_connection_drop_work); 5771 cancel_work_sync(&ifmgd->chswitch_work); 5772 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work); 5773 5774 sdata_lock(sdata); 5775 if (ifmgd->assoc_data) { 5776 struct cfg80211_bss *bss = ifmgd->assoc_data->bss; 5777 ieee80211_destroy_assoc_data(sdata, false, false); 5778 cfg80211_assoc_timeout(sdata->dev, bss); 5779 } 5780 if (ifmgd->auth_data) 5781 ieee80211_destroy_auth_data(sdata, false); 5782 spin_lock_bh(&ifmgd->teardown_lock); 5783 if (ifmgd->teardown_skb) { 5784 kfree_skb(ifmgd->teardown_skb); 5785 ifmgd->teardown_skb = NULL; 5786 ifmgd->orig_teardown_skb = NULL; 5787 } 5788 kfree(ifmgd->assoc_req_ies); 5789 ifmgd->assoc_req_ies = NULL; 5790 ifmgd->assoc_req_ies_len = 0; 5791 spin_unlock_bh(&ifmgd->teardown_lock); 5792 del_timer_sync(&ifmgd->timer); 5793 sdata_unlock(sdata); 5794 } 5795 5796 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, 5797 enum nl80211_cqm_rssi_threshold_event rssi_event, 5798 s32 rssi_level, 5799 gfp_t gfp) 5800 { 5801 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 5802 5803 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); 5804 5805 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); 5806 } 5807 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); 5808 5809 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) 5810 { 5811 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); 5812 5813 trace_api_cqm_beacon_loss_notify(sdata->local, sdata); 5814 5815 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); 5816 } 5817 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify); 5818