xref: /openbmc/linux/net/mac80211/mlme.c (revision 51ad5b54)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * BSS client mode implementation
4  * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
5  * Copyright 2004, Instant802 Networks, Inc.
6  * Copyright 2005, Devicescape Software, Inc.
7  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
8  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9  * Copyright 2013-2014  Intel Mobile Communications GmbH
10  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
11  * Copyright (C) 2018 - 2020 Intel Corporation
12  */
13 
14 #include <linux/delay.h>
15 #include <linux/fips.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
27 
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
30 #include "rate.h"
31 #include "led.h"
32 #include "fils_aead.h"
33 
34 #define IEEE80211_AUTH_TIMEOUT		(HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG	(HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT	(HZ / 10)
37 #define IEEE80211_AUTH_TIMEOUT_SAE	(HZ * 2)
38 #define IEEE80211_AUTH_MAX_TRIES	3
39 #define IEEE80211_AUTH_WAIT_ASSOC	(HZ * 5)
40 #define IEEE80211_ASSOC_TIMEOUT		(HZ / 5)
41 #define IEEE80211_ASSOC_TIMEOUT_LONG	(HZ / 2)
42 #define IEEE80211_ASSOC_TIMEOUT_SHORT	(HZ / 10)
43 #define IEEE80211_ASSOC_MAX_TRIES	3
44 
45 static int max_nullfunc_tries = 2;
46 module_param(max_nullfunc_tries, int, 0644);
47 MODULE_PARM_DESC(max_nullfunc_tries,
48 		 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 
50 static int max_probe_tries = 5;
51 module_param(max_probe_tries, int, 0644);
52 MODULE_PARM_DESC(max_probe_tries,
53 		 "Maximum probe tries before disconnecting (reason 4).");
54 
55 /*
56  * Beacon loss timeout is calculated as N frames times the
57  * advertised beacon interval.  This may need to be somewhat
58  * higher than what hardware might detect to account for
59  * delays in the host processing frames. But since we also
60  * probe on beacon miss before declaring the connection lost
61  * default to what we want.
62  */
63 static int beacon_loss_count = 7;
64 module_param(beacon_loss_count, int, 0644);
65 MODULE_PARM_DESC(beacon_loss_count,
66 		 "Number of beacon intervals before we decide beacon was lost.");
67 
68 /*
69  * Time the connection can be idle before we probe
70  * it to see if we can still talk to the AP.
71  */
72 #define IEEE80211_CONNECTION_IDLE_TIME	(30 * HZ)
73 /*
74  * Time we wait for a probe response after sending
75  * a probe request because of beacon loss or for
76  * checking the connection still works.
77  */
78 static int probe_wait_ms = 500;
79 module_param(probe_wait_ms, int, 0644);
80 MODULE_PARM_DESC(probe_wait_ms,
81 		 "Maximum time(ms) to wait for probe response"
82 		 " before disconnecting (reason 4).");
83 
84 /*
85  * How many Beacon frames need to have been used in average signal strength
86  * before starting to indicate signal change events.
87  */
88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT	4
89 
90 /*
91  * We can have multiple work items (and connection probing)
92  * scheduling this timer, but we need to take care to only
93  * reschedule it when it should fire _earlier_ than it was
94  * asked for before, or if it's not pending right now. This
95  * function ensures that. Note that it then is required to
96  * run this function for all timeouts after the first one
97  * has happened -- the work that runs from this timer will
98  * do that.
99  */
100 static void run_again(struct ieee80211_sub_if_data *sdata,
101 		      unsigned long timeout)
102 {
103 	sdata_assert_lock(sdata);
104 
105 	if (!timer_pending(&sdata->u.mgd.timer) ||
106 	    time_before(timeout, sdata->u.mgd.timer.expires))
107 		mod_timer(&sdata->u.mgd.timer, timeout);
108 }
109 
110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
111 {
112 	if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
113 		return;
114 
115 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
116 		return;
117 
118 	mod_timer(&sdata->u.mgd.bcn_mon_timer,
119 		  round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
120 }
121 
122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
123 {
124 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
125 
126 	if (unlikely(!ifmgd->associated))
127 		return;
128 
129 	if (ifmgd->probe_send_count)
130 		ifmgd->probe_send_count = 0;
131 
132 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
133 		return;
134 
135 	mod_timer(&ifmgd->conn_mon_timer,
136 		  round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
137 }
138 
139 static int ecw2cw(int ecw)
140 {
141 	return (1 << ecw) - 1;
142 }
143 
144 static u32
145 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
146 			     struct ieee80211_supported_band *sband,
147 			     struct ieee80211_channel *channel,
148 			     u32 vht_cap_info,
149 			     const struct ieee80211_ht_operation *ht_oper,
150 			     const struct ieee80211_vht_operation *vht_oper,
151 			     const struct ieee80211_he_operation *he_oper,
152 			     struct cfg80211_chan_def *chandef, bool tracking)
153 {
154 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
155 	struct cfg80211_chan_def vht_chandef;
156 	struct ieee80211_sta_ht_cap sta_ht_cap;
157 	u32 ht_cfreq, ret;
158 
159 	memset(chandef, 0, sizeof(struct cfg80211_chan_def));
160 	chandef->chan = channel;
161 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
162 	chandef->center_freq1 = channel->center_freq;
163 	chandef->freq1_offset = channel->freq_offset;
164 
165 	if (channel->band == NL80211_BAND_6GHZ) {
166 		if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, chandef))
167 			ret = IEEE80211_STA_DISABLE_HT |
168 			      IEEE80211_STA_DISABLE_VHT |
169 			      IEEE80211_STA_DISABLE_HE;
170 		else
171 			ret = 0;
172 		vht_chandef = *chandef;
173 		goto out;
174 	}
175 
176 	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
177 	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
178 
179 	if (!ht_oper || !sta_ht_cap.ht_supported) {
180 		ret = IEEE80211_STA_DISABLE_HT |
181 		      IEEE80211_STA_DISABLE_VHT |
182 		      IEEE80211_STA_DISABLE_HE;
183 		goto out;
184 	}
185 
186 	chandef->width = NL80211_CHAN_WIDTH_20;
187 
188 	ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
189 						  channel->band);
190 	/* check that channel matches the right operating channel */
191 	if (!tracking && channel->center_freq != ht_cfreq) {
192 		/*
193 		 * It's possible that some APs are confused here;
194 		 * Netgear WNDR3700 sometimes reports 4 higher than
195 		 * the actual channel in association responses, but
196 		 * since we look at probe response/beacon data here
197 		 * it should be OK.
198 		 */
199 		sdata_info(sdata,
200 			   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
201 			   channel->center_freq, ht_cfreq,
202 			   ht_oper->primary_chan, channel->band);
203 		ret = IEEE80211_STA_DISABLE_HT |
204 		      IEEE80211_STA_DISABLE_VHT |
205 		      IEEE80211_STA_DISABLE_HE;
206 		goto out;
207 	}
208 
209 	/* check 40 MHz support, if we have it */
210 	if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
211 		ieee80211_chandef_ht_oper(ht_oper, chandef);
212 	} else {
213 		/* 40 MHz (and 80 MHz) must be supported for VHT */
214 		ret = IEEE80211_STA_DISABLE_VHT;
215 		/* also mark 40 MHz disabled */
216 		ret |= IEEE80211_STA_DISABLE_40MHZ;
217 		goto out;
218 	}
219 
220 	if (!vht_oper || !sband->vht_cap.vht_supported) {
221 		ret = IEEE80211_STA_DISABLE_VHT;
222 		goto out;
223 	}
224 
225 	vht_chandef = *chandef;
226 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper &&
227 	    (le32_to_cpu(he_oper->he_oper_params) &
228 	     IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
229 		struct ieee80211_vht_operation he_oper_vht_cap;
230 
231 		/*
232 		 * Set only first 3 bytes (other 2 aren't used in
233 		 * ieee80211_chandef_vht_oper() anyway)
234 		 */
235 		memcpy(&he_oper_vht_cap, he_oper->optional, 3);
236 		he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
237 
238 		if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
239 						&he_oper_vht_cap, ht_oper,
240 						&vht_chandef)) {
241 			if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
242 				sdata_info(sdata,
243 					   "HE AP VHT information is invalid, disable HE\n");
244 			ret = IEEE80211_STA_DISABLE_HE;
245 			goto out;
246 		}
247 	} else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
248 					       vht_cap_info,
249 					       vht_oper, ht_oper,
250 					       &vht_chandef)) {
251 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
252 			sdata_info(sdata,
253 				   "AP VHT information is invalid, disable VHT\n");
254 		ret = IEEE80211_STA_DISABLE_VHT;
255 		goto out;
256 	}
257 
258 	if (!cfg80211_chandef_valid(&vht_chandef)) {
259 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
260 			sdata_info(sdata,
261 				   "AP VHT information is invalid, disable VHT\n");
262 		ret = IEEE80211_STA_DISABLE_VHT;
263 		goto out;
264 	}
265 
266 	if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
267 		ret = 0;
268 		goto out;
269 	}
270 
271 	if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
272 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
273 			sdata_info(sdata,
274 				   "AP VHT information doesn't match HT, disable VHT\n");
275 		ret = IEEE80211_STA_DISABLE_VHT;
276 		goto out;
277 	}
278 
279 	*chandef = vht_chandef;
280 
281 	ret = 0;
282 
283 out:
284 	/*
285 	 * When tracking the current AP, don't do any further checks if the
286 	 * new chandef is identical to the one we're currently using for the
287 	 * connection. This keeps us from playing ping-pong with regulatory,
288 	 * without it the following can happen (for example):
289 	 *  - connect to an AP with 80 MHz, world regdom allows 80 MHz
290 	 *  - AP advertises regdom US
291 	 *  - CRDA loads regdom US with 80 MHz prohibited (old database)
292 	 *  - the code below detects an unsupported channel, downgrades, and
293 	 *    we disconnect from the AP in the caller
294 	 *  - disconnect causes CRDA to reload world regdomain and the game
295 	 *    starts anew.
296 	 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
297 	 *
298 	 * It seems possible that there are still scenarios with CSA or real
299 	 * bandwidth changes where a this could happen, but those cases are
300 	 * less common and wouldn't completely prevent using the AP.
301 	 */
302 	if (tracking &&
303 	    cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
304 		return ret;
305 
306 	/* don't print the message below for VHT mismatch if VHT is disabled */
307 	if (ret & IEEE80211_STA_DISABLE_VHT)
308 		vht_chandef = *chandef;
309 
310 	/*
311 	 * Ignore the DISABLED flag when we're already connected and only
312 	 * tracking the APs beacon for bandwidth changes - otherwise we
313 	 * might get disconnected here if we connect to an AP, update our
314 	 * regulatory information based on the AP's country IE and the
315 	 * information we have is wrong/outdated and disables the channel
316 	 * that we're actually using for the connection to the AP.
317 	 */
318 	while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
319 					tracking ? 0 :
320 						   IEEE80211_CHAN_DISABLED)) {
321 		if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
322 			ret = IEEE80211_STA_DISABLE_HT |
323 			      IEEE80211_STA_DISABLE_VHT |
324 			      IEEE80211_STA_DISABLE_HE;
325 			break;
326 		}
327 
328 		ret |= ieee80211_chandef_downgrade(chandef);
329 	}
330 
331 	if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
332 						 IEEE80211_CHAN_NO_HE))
333 		ret |= IEEE80211_STA_DISABLE_HE;
334 
335 	if (chandef->width != vht_chandef.width && !tracking)
336 		sdata_info(sdata,
337 			   "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
338 
339 	WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
340 	return ret;
341 }
342 
343 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
344 			       struct sta_info *sta,
345 			       const struct ieee80211_ht_cap *ht_cap,
346 			       const struct ieee80211_vht_cap *vht_cap,
347 			       const struct ieee80211_ht_operation *ht_oper,
348 			       const struct ieee80211_vht_operation *vht_oper,
349 			       const struct ieee80211_he_operation *he_oper,
350 			       const u8 *bssid, u32 *changed)
351 {
352 	struct ieee80211_local *local = sdata->local;
353 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
354 	struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan;
355 	struct ieee80211_supported_band *sband =
356 		local->hw.wiphy->bands[chan->band];
357 	struct cfg80211_chan_def chandef;
358 	u16 ht_opmode;
359 	u32 flags;
360 	enum ieee80211_sta_rx_bandwidth new_sta_bw;
361 	u32 vht_cap_info = 0;
362 	int ret;
363 
364 	/* if HT was/is disabled, don't track any bandwidth changes */
365 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
366 		return 0;
367 
368 	/* don't check VHT if we associated as non-VHT station */
369 	if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
370 		vht_oper = NULL;
371 
372 	/* don't check HE if we associated as non-HE station */
373 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HE ||
374 	    !ieee80211_get_he_sta_cap(sband))
375 		he_oper = NULL;
376 
377 	if (WARN_ON_ONCE(!sta))
378 		return -EINVAL;
379 
380 	/*
381 	 * if bss configuration changed store the new one -
382 	 * this may be applicable even if channel is identical
383 	 */
384 	ht_opmode = le16_to_cpu(ht_oper->operation_mode);
385 	if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
386 		*changed |= BSS_CHANGED_HT;
387 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
388 	}
389 
390 	if (vht_cap)
391 		vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info);
392 
393 	/* calculate new channel (type) based on HT/VHT/HE operation IEs */
394 	flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info,
395 					     ht_oper, vht_oper, he_oper,
396 					     &chandef, true);
397 
398 	/*
399 	 * Downgrade the new channel if we associated with restricted
400 	 * capabilities. For example, if we associated as a 20 MHz STA
401 	 * to a 40 MHz AP (due to regulatory, capabilities or config
402 	 * reasons) then switching to a 40 MHz channel now won't do us
403 	 * any good -- we couldn't use it with the AP.
404 	 */
405 	if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
406 	    chandef.width == NL80211_CHAN_WIDTH_80P80)
407 		flags |= ieee80211_chandef_downgrade(&chandef);
408 	if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
409 	    chandef.width == NL80211_CHAN_WIDTH_160)
410 		flags |= ieee80211_chandef_downgrade(&chandef);
411 	if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
412 	    chandef.width > NL80211_CHAN_WIDTH_20)
413 		flags |= ieee80211_chandef_downgrade(&chandef);
414 
415 	if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
416 		return 0;
417 
418 	sdata_info(sdata,
419 		   "AP %pM changed bandwidth, new config is %d.%03d MHz, "
420 		   "width %d (%d.%03d/%d MHz)\n",
421 		   ifmgd->bssid, chandef.chan->center_freq,
422 		   chandef.chan->freq_offset, chandef.width,
423 		   chandef.center_freq1, chandef.freq1_offset,
424 		   chandef.center_freq2);
425 
426 	if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
427 				      IEEE80211_STA_DISABLE_VHT |
428 				      IEEE80211_STA_DISABLE_HE |
429 				      IEEE80211_STA_DISABLE_40MHZ |
430 				      IEEE80211_STA_DISABLE_80P80MHZ |
431 				      IEEE80211_STA_DISABLE_160MHZ)) ||
432 	    !cfg80211_chandef_valid(&chandef)) {
433 		sdata_info(sdata,
434 			   "AP %pM changed bandwidth in a way we can't support - disconnect\n",
435 			   ifmgd->bssid);
436 		return -EINVAL;
437 	}
438 
439 	switch (chandef.width) {
440 	case NL80211_CHAN_WIDTH_20_NOHT:
441 	case NL80211_CHAN_WIDTH_20:
442 		new_sta_bw = IEEE80211_STA_RX_BW_20;
443 		break;
444 	case NL80211_CHAN_WIDTH_40:
445 		new_sta_bw = IEEE80211_STA_RX_BW_40;
446 		break;
447 	case NL80211_CHAN_WIDTH_80:
448 		new_sta_bw = IEEE80211_STA_RX_BW_80;
449 		break;
450 	case NL80211_CHAN_WIDTH_80P80:
451 	case NL80211_CHAN_WIDTH_160:
452 		new_sta_bw = IEEE80211_STA_RX_BW_160;
453 		break;
454 	default:
455 		return -EINVAL;
456 	}
457 
458 	if (new_sta_bw > sta->cur_max_bandwidth)
459 		new_sta_bw = sta->cur_max_bandwidth;
460 
461 	if (new_sta_bw < sta->sta.bandwidth) {
462 		sta->sta.bandwidth = new_sta_bw;
463 		rate_control_rate_update(local, sband, sta,
464 					 IEEE80211_RC_BW_CHANGED);
465 	}
466 
467 	ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
468 	if (ret) {
469 		sdata_info(sdata,
470 			   "AP %pM changed bandwidth to incompatible one - disconnect\n",
471 			   ifmgd->bssid);
472 		return ret;
473 	}
474 
475 	if (new_sta_bw > sta->sta.bandwidth) {
476 		sta->sta.bandwidth = new_sta_bw;
477 		rate_control_rate_update(local, sband, sta,
478 					 IEEE80211_RC_BW_CHANGED);
479 	}
480 
481 	return 0;
482 }
483 
484 /* frame sending functions */
485 
486 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
487 				struct sk_buff *skb, u8 ap_ht_param,
488 				struct ieee80211_supported_band *sband,
489 				struct ieee80211_channel *channel,
490 				enum ieee80211_smps_mode smps)
491 {
492 	u8 *pos;
493 	u32 flags = channel->flags;
494 	u16 cap;
495 	struct ieee80211_sta_ht_cap ht_cap;
496 
497 	BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
498 
499 	memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
500 	ieee80211_apply_htcap_overrides(sdata, &ht_cap);
501 
502 	/* determine capability flags */
503 	cap = ht_cap.cap;
504 
505 	switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
506 	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
507 		if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
508 			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
509 			cap &= ~IEEE80211_HT_CAP_SGI_40;
510 		}
511 		break;
512 	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
513 		if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
514 			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
515 			cap &= ~IEEE80211_HT_CAP_SGI_40;
516 		}
517 		break;
518 	}
519 
520 	/*
521 	 * If 40 MHz was disabled associate as though we weren't
522 	 * capable of 40 MHz -- some broken APs will never fall
523 	 * back to trying to transmit in 20 MHz.
524 	 */
525 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
526 		cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
527 		cap &= ~IEEE80211_HT_CAP_SGI_40;
528 	}
529 
530 	/* set SM PS mode properly */
531 	cap &= ~IEEE80211_HT_CAP_SM_PS;
532 	switch (smps) {
533 	case IEEE80211_SMPS_AUTOMATIC:
534 	case IEEE80211_SMPS_NUM_MODES:
535 		WARN_ON(1);
536 		/* fall through */
537 	case IEEE80211_SMPS_OFF:
538 		cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
539 			IEEE80211_HT_CAP_SM_PS_SHIFT;
540 		break;
541 	case IEEE80211_SMPS_STATIC:
542 		cap |= WLAN_HT_CAP_SM_PS_STATIC <<
543 			IEEE80211_HT_CAP_SM_PS_SHIFT;
544 		break;
545 	case IEEE80211_SMPS_DYNAMIC:
546 		cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
547 			IEEE80211_HT_CAP_SM_PS_SHIFT;
548 		break;
549 	}
550 
551 	/* reserve and fill IE */
552 	pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
553 	ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
554 }
555 
556 /* This function determines vht capability flags for the association
557  * and builds the IE.
558  * Note - the function may set the owner of the MU-MIMO capability
559  */
560 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
561 				 struct sk_buff *skb,
562 				 struct ieee80211_supported_band *sband,
563 				 struct ieee80211_vht_cap *ap_vht_cap)
564 {
565 	struct ieee80211_local *local = sdata->local;
566 	u8 *pos;
567 	u32 cap;
568 	struct ieee80211_sta_vht_cap vht_cap;
569 	u32 mask, ap_bf_sts, our_bf_sts;
570 
571 	BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
572 
573 	memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
574 	ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
575 
576 	/* determine capability flags */
577 	cap = vht_cap.cap;
578 
579 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
580 		u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
581 
582 		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
583 		if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
584 		    bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
585 			cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
586 	}
587 
588 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
589 		cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
590 		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
591 	}
592 
593 	/*
594 	 * Some APs apparently get confused if our capabilities are better
595 	 * than theirs, so restrict what we advertise in the assoc request.
596 	 */
597 	if (!(ap_vht_cap->vht_cap_info &
598 			cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
599 		cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
600 			 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
601 	else if (!(ap_vht_cap->vht_cap_info &
602 			cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
603 		cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
604 
605 	/*
606 	 * If some other vif is using the MU-MIMO capablity we cannot associate
607 	 * using MU-MIMO - this will lead to contradictions in the group-id
608 	 * mechanism.
609 	 * Ownership is defined since association request, in order to avoid
610 	 * simultaneous associations with MU-MIMO.
611 	 */
612 	if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
613 		bool disable_mu_mimo = false;
614 		struct ieee80211_sub_if_data *other;
615 
616 		list_for_each_entry_rcu(other, &local->interfaces, list) {
617 			if (other->vif.mu_mimo_owner) {
618 				disable_mu_mimo = true;
619 				break;
620 			}
621 		}
622 		if (disable_mu_mimo)
623 			cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
624 		else
625 			sdata->vif.mu_mimo_owner = true;
626 	}
627 
628 	mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
629 
630 	ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
631 	our_bf_sts = cap & mask;
632 
633 	if (ap_bf_sts < our_bf_sts) {
634 		cap &= ~mask;
635 		cap |= ap_bf_sts;
636 	}
637 
638 	/* reserve and fill IE */
639 	pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
640 	ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
641 }
642 
643 /* This function determines HE capability flags for the association
644  * and builds the IE.
645  */
646 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
647 				struct sk_buff *skb,
648 				struct ieee80211_supported_band *sband)
649 {
650 	u8 *pos;
651 	const struct ieee80211_sta_he_cap *he_cap = NULL;
652 	struct ieee80211_chanctx_conf *chanctx_conf;
653 	u8 he_cap_size;
654 	bool reg_cap = false;
655 
656 	rcu_read_lock();
657 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
658 	if (!WARN_ON_ONCE(!chanctx_conf))
659 		reg_cap = cfg80211_chandef_usable(sdata->wdev.wiphy,
660 						  &chanctx_conf->def,
661 						  IEEE80211_CHAN_NO_HE);
662 
663 	rcu_read_unlock();
664 
665 	he_cap = ieee80211_get_he_sta_cap(sband);
666 	if (!he_cap || !reg_cap)
667 		return;
668 
669 	/*
670 	 * TODO: the 1 added is because this temporarily is under the EXTENSION
671 	 * IE. Get rid of it when it moves.
672 	 */
673 	he_cap_size =
674 		2 + 1 + sizeof(he_cap->he_cap_elem) +
675 		ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
676 		ieee80211_he_ppe_size(he_cap->ppe_thres[0],
677 				      he_cap->he_cap_elem.phy_cap_info);
678 	pos = skb_put(skb, he_cap_size);
679 	ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size);
680 
681 	ieee80211_ie_build_he_6ghz_cap(sdata, skb);
682 }
683 
684 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
685 {
686 	struct ieee80211_local *local = sdata->local;
687 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
688 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
689 	struct sk_buff *skb;
690 	struct ieee80211_mgmt *mgmt;
691 	u8 *pos, qos_info, *ie_start;
692 	size_t offset = 0, noffset;
693 	int i, count, rates_len, supp_rates_len, shift;
694 	u16 capab;
695 	struct ieee80211_supported_band *sband;
696 	struct ieee80211_chanctx_conf *chanctx_conf;
697 	struct ieee80211_channel *chan;
698 	u32 rates = 0;
699 	struct element *ext_capa = NULL;
700 
701 	/* we know it's writable, cast away the const */
702 	if (assoc_data->ie_len)
703 		ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
704 						      assoc_data->ie,
705 						      assoc_data->ie_len);
706 
707 	sdata_assert_lock(sdata);
708 
709 	rcu_read_lock();
710 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
711 	if (WARN_ON(!chanctx_conf)) {
712 		rcu_read_unlock();
713 		return;
714 	}
715 	chan = chanctx_conf->def.chan;
716 	rcu_read_unlock();
717 	sband = local->hw.wiphy->bands[chan->band];
718 	shift = ieee80211_vif_get_shift(&sdata->vif);
719 
720 	if (assoc_data->supp_rates_len) {
721 		/*
722 		 * Get all rates supported by the device and the AP as
723 		 * some APs don't like getting a superset of their rates
724 		 * in the association request (e.g. D-Link DAP 1353 in
725 		 * b-only mode)...
726 		 */
727 		rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
728 						     assoc_data->supp_rates,
729 						     assoc_data->supp_rates_len,
730 						     &rates);
731 	} else {
732 		/*
733 		 * In case AP not provide any supported rates information
734 		 * before association, we send information element(s) with
735 		 * all rates that we support.
736 		 */
737 		rates_len = 0;
738 		for (i = 0; i < sband->n_bitrates; i++) {
739 			rates |= BIT(i);
740 			rates_len++;
741 		}
742 	}
743 
744 	skb = alloc_skb(local->hw.extra_tx_headroom +
745 			sizeof(*mgmt) + /* bit too much but doesn't matter */
746 			2 + assoc_data->ssid_len + /* SSID */
747 			4 + rates_len + /* (extended) rates */
748 			4 + /* power capability */
749 			2 + 2 * sband->n_channels + /* supported channels */
750 			2 + sizeof(struct ieee80211_ht_cap) + /* HT */
751 			2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
752 			2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */
753 				sizeof(struct ieee80211_he_mcs_nss_supp) +
754 				IEEE80211_HE_PPE_THRES_MAX_LEN +
755 			2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) +
756 			assoc_data->ie_len + /* extra IEs */
757 			(assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
758 			9, /* WMM */
759 			GFP_KERNEL);
760 	if (!skb)
761 		return;
762 
763 	skb_reserve(skb, local->hw.extra_tx_headroom);
764 
765 	capab = WLAN_CAPABILITY_ESS;
766 
767 	if (sband->band == NL80211_BAND_2GHZ) {
768 		capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
769 		capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
770 	}
771 
772 	if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
773 		capab |= WLAN_CAPABILITY_PRIVACY;
774 
775 	if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
776 	    ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
777 		capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
778 
779 	if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
780 		capab |= WLAN_CAPABILITY_RADIO_MEASURE;
781 
782 	mgmt = skb_put_zero(skb, 24);
783 	memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
784 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
785 	memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
786 
787 	if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
788 		skb_put(skb, 10);
789 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
790 						  IEEE80211_STYPE_REASSOC_REQ);
791 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
792 		mgmt->u.reassoc_req.listen_interval =
793 				cpu_to_le16(local->hw.conf.listen_interval);
794 		memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
795 		       ETH_ALEN);
796 	} else {
797 		skb_put(skb, 4);
798 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
799 						  IEEE80211_STYPE_ASSOC_REQ);
800 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
801 		mgmt->u.assoc_req.listen_interval =
802 				cpu_to_le16(local->hw.conf.listen_interval);
803 	}
804 
805 	/* SSID */
806 	pos = skb_put(skb, 2 + assoc_data->ssid_len);
807 	ie_start = pos;
808 	*pos++ = WLAN_EID_SSID;
809 	*pos++ = assoc_data->ssid_len;
810 	memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
811 
812 	/* add all rates which were marked to be used above */
813 	supp_rates_len = rates_len;
814 	if (supp_rates_len > 8)
815 		supp_rates_len = 8;
816 
817 	pos = skb_put(skb, supp_rates_len + 2);
818 	*pos++ = WLAN_EID_SUPP_RATES;
819 	*pos++ = supp_rates_len;
820 
821 	count = 0;
822 	for (i = 0; i < sband->n_bitrates; i++) {
823 		if (BIT(i) & rates) {
824 			int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
825 						5 * (1 << shift));
826 			*pos++ = (u8) rate;
827 			if (++count == 8)
828 				break;
829 		}
830 	}
831 
832 	if (rates_len > count) {
833 		pos = skb_put(skb, rates_len - count + 2);
834 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
835 		*pos++ = rates_len - count;
836 
837 		for (i++; i < sband->n_bitrates; i++) {
838 			if (BIT(i) & rates) {
839 				int rate;
840 				rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
841 						    5 * (1 << shift));
842 				*pos++ = (u8) rate;
843 			}
844 		}
845 	}
846 
847 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
848 	    capab & WLAN_CAPABILITY_RADIO_MEASURE) {
849 		pos = skb_put(skb, 4);
850 		*pos++ = WLAN_EID_PWR_CAPABILITY;
851 		*pos++ = 2;
852 		*pos++ = 0; /* min tx power */
853 		 /* max tx power */
854 		*pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
855 	}
856 
857 	/*
858 	 * Per spec, we shouldn't include the list of channels if we advertise
859 	 * support for extended channel switching, but we've always done that;
860 	 * (for now?) apply this restriction only on the (new) 6 GHz band.
861 	 */
862 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT &&
863 	    (sband->band != NL80211_BAND_6GHZ ||
864 	     !ext_capa || ext_capa->datalen < 1 ||
865 	     !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) {
866 		/* TODO: get this in reg domain format */
867 		pos = skb_put(skb, 2 * sband->n_channels + 2);
868 		*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
869 		*pos++ = 2 * sband->n_channels;
870 		for (i = 0; i < sband->n_channels; i++) {
871 			*pos++ = ieee80211_frequency_to_channel(
872 					sband->channels[i].center_freq);
873 			*pos++ = 1; /* one channel in the subband*/
874 		}
875 	}
876 
877 	/* Set MBSSID support for HE AP if needed */
878 	if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) &&
879 	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && assoc_data->ie_len &&
880 	    ext_capa && ext_capa->datalen >= 3)
881 		ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
882 
883 	/* if present, add any custom IEs that go before HT */
884 	if (assoc_data->ie_len) {
885 		static const u8 before_ht[] = {
886 			WLAN_EID_SSID,
887 			WLAN_EID_SUPP_RATES,
888 			WLAN_EID_EXT_SUPP_RATES,
889 			WLAN_EID_PWR_CAPABILITY,
890 			WLAN_EID_SUPPORTED_CHANNELS,
891 			WLAN_EID_RSN,
892 			WLAN_EID_QOS_CAPA,
893 			WLAN_EID_RRM_ENABLED_CAPABILITIES,
894 			WLAN_EID_MOBILITY_DOMAIN,
895 			WLAN_EID_FAST_BSS_TRANSITION,	/* reassoc only */
896 			WLAN_EID_RIC_DATA,		/* reassoc only */
897 			WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
898 		};
899 		static const u8 after_ric[] = {
900 			WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
901 			WLAN_EID_HT_CAPABILITY,
902 			WLAN_EID_BSS_COEX_2040,
903 			/* luckily this is almost always there */
904 			WLAN_EID_EXT_CAPABILITY,
905 			WLAN_EID_QOS_TRAFFIC_CAPA,
906 			WLAN_EID_TIM_BCAST_REQ,
907 			WLAN_EID_INTERWORKING,
908 			/* 60 GHz (Multi-band, DMG, MMS) can't happen */
909 			WLAN_EID_VHT_CAPABILITY,
910 			WLAN_EID_OPMODE_NOTIF,
911 		};
912 
913 		noffset = ieee80211_ie_split_ric(assoc_data->ie,
914 						 assoc_data->ie_len,
915 						 before_ht,
916 						 ARRAY_SIZE(before_ht),
917 						 after_ric,
918 						 ARRAY_SIZE(after_ric),
919 						 offset);
920 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
921 		offset = noffset;
922 	}
923 
924 	if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
925 			 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
926 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
927 
928 	if (sband->band != NL80211_BAND_6GHZ &&
929 	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
930 		ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
931 				    sband, chan, sdata->smps_mode);
932 
933 	/* if present, add any custom IEs that go before VHT */
934 	if (assoc_data->ie_len) {
935 		static const u8 before_vht[] = {
936 			/*
937 			 * no need to list the ones split off before HT
938 			 * or generated here
939 			 */
940 			WLAN_EID_BSS_COEX_2040,
941 			WLAN_EID_EXT_CAPABILITY,
942 			WLAN_EID_QOS_TRAFFIC_CAPA,
943 			WLAN_EID_TIM_BCAST_REQ,
944 			WLAN_EID_INTERWORKING,
945 			/* 60 GHz (Multi-band, DMG, MMS) can't happen */
946 		};
947 
948 		/* RIC already taken above, so no need to handle here anymore */
949 		noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
950 					     before_vht, ARRAY_SIZE(before_vht),
951 					     offset);
952 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
953 		offset = noffset;
954 	}
955 
956 	/* if present, add any custom IEs that go before HE */
957 	if (assoc_data->ie_len) {
958 		static const u8 before_he[] = {
959 			/*
960 			 * no need to list the ones split off before VHT
961 			 * or generated here
962 			 */
963 			WLAN_EID_OPMODE_NOTIF,
964 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
965 			/* 11ai elements */
966 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
967 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
968 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
969 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
970 			WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
971 			/* TODO: add 11ah/11aj/11ak elements */
972 		};
973 
974 		/* RIC already taken above, so no need to handle here anymore */
975 		noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
976 					     before_he, ARRAY_SIZE(before_he),
977 					     offset);
978 		pos = skb_put(skb, noffset - offset);
979 		memcpy(pos, assoc_data->ie + offset, noffset - offset);
980 		offset = noffset;
981 	}
982 
983 	if (sband->band != NL80211_BAND_6GHZ &&
984 	    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
985 		ieee80211_add_vht_ie(sdata, skb, sband,
986 				     &assoc_data->ap_vht_cap);
987 
988 	/*
989 	 * If AP doesn't support HT, mark HE as disabled.
990 	 * If on the 5GHz band, make sure it supports VHT.
991 	 */
992 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HT ||
993 	    (sband->band == NL80211_BAND_5GHZ &&
994 	     ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
995 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
996 
997 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
998 		ieee80211_add_he_ie(sdata, skb, sband);
999 
1000 	/* if present, add any custom non-vendor IEs that go after HE */
1001 	if (assoc_data->ie_len) {
1002 		noffset = ieee80211_ie_split_vendor(assoc_data->ie,
1003 						    assoc_data->ie_len,
1004 						    offset);
1005 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1006 		offset = noffset;
1007 	}
1008 
1009 	if (assoc_data->wmm) {
1010 		if (assoc_data->uapsd) {
1011 			qos_info = ifmgd->uapsd_queues;
1012 			qos_info |= (ifmgd->uapsd_max_sp_len <<
1013 				     IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
1014 		} else {
1015 			qos_info = 0;
1016 		}
1017 
1018 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
1019 	}
1020 
1021 	/* add any remaining custom (i.e. vendor specific here) IEs */
1022 	if (assoc_data->ie_len) {
1023 		noffset = assoc_data->ie_len;
1024 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1025 	}
1026 
1027 	if (assoc_data->fils_kek_len &&
1028 	    fils_encrypt_assoc_req(skb, assoc_data) < 0) {
1029 		dev_kfree_skb(skb);
1030 		return;
1031 	}
1032 
1033 	pos = skb_tail_pointer(skb);
1034 	kfree(ifmgd->assoc_req_ies);
1035 	ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC);
1036 	ifmgd->assoc_req_ies_len = pos - ie_start;
1037 
1038 	drv_mgd_prepare_tx(local, sdata, 0);
1039 
1040 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1041 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1042 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
1043 						IEEE80211_TX_INTFL_MLME_CONN_TX;
1044 	ieee80211_tx_skb(sdata, skb);
1045 }
1046 
1047 void ieee80211_send_pspoll(struct ieee80211_local *local,
1048 			   struct ieee80211_sub_if_data *sdata)
1049 {
1050 	struct ieee80211_pspoll *pspoll;
1051 	struct sk_buff *skb;
1052 
1053 	skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
1054 	if (!skb)
1055 		return;
1056 
1057 	pspoll = (struct ieee80211_pspoll *) skb->data;
1058 	pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1059 
1060 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1061 	ieee80211_tx_skb(sdata, skb);
1062 }
1063 
1064 void ieee80211_send_nullfunc(struct ieee80211_local *local,
1065 			     struct ieee80211_sub_if_data *sdata,
1066 			     bool powersave)
1067 {
1068 	struct sk_buff *skb;
1069 	struct ieee80211_hdr_3addr *nullfunc;
1070 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1071 
1072 	/* Don't send NDPs when STA is connected HE */
1073 	if (sdata->vif.type == NL80211_IFTYPE_STATION &&
1074 	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
1075 		return;
1076 
1077 	skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
1078 		!ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
1079 	if (!skb)
1080 		return;
1081 
1082 	nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
1083 	if (powersave)
1084 		nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1085 
1086 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
1087 					IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
1088 
1089 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1090 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1091 
1092 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
1093 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1094 
1095 	ieee80211_tx_skb(sdata, skb);
1096 }
1097 
1098 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
1099 					  struct ieee80211_sub_if_data *sdata)
1100 {
1101 	struct sk_buff *skb;
1102 	struct ieee80211_hdr *nullfunc;
1103 	__le16 fc;
1104 
1105 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1106 		return;
1107 
1108 	/* Don't send NDPs when connected HE */
1109 	if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
1110 		return;
1111 
1112 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
1113 	if (!skb)
1114 		return;
1115 
1116 	skb_reserve(skb, local->hw.extra_tx_headroom);
1117 
1118 	nullfunc = skb_put_zero(skb, 30);
1119 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
1120 			 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1121 	nullfunc->frame_control = fc;
1122 	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
1123 	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
1124 	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
1125 	memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
1126 
1127 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1128 	ieee80211_tx_skb(sdata, skb);
1129 }
1130 
1131 /* spectrum management related things */
1132 static void ieee80211_chswitch_work(struct work_struct *work)
1133 {
1134 	struct ieee80211_sub_if_data *sdata =
1135 		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
1136 	struct ieee80211_local *local = sdata->local;
1137 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1138 	int ret;
1139 
1140 	if (!ieee80211_sdata_running(sdata))
1141 		return;
1142 
1143 	sdata_lock(sdata);
1144 	mutex_lock(&local->mtx);
1145 	mutex_lock(&local->chanctx_mtx);
1146 
1147 	if (!ifmgd->associated)
1148 		goto out;
1149 
1150 	if (!sdata->vif.csa_active)
1151 		goto out;
1152 
1153 	/*
1154 	 * using reservation isn't immediate as it may be deferred until later
1155 	 * with multi-vif. once reservation is complete it will re-schedule the
1156 	 * work with no reserved_chanctx so verify chandef to check if it
1157 	 * completed successfully
1158 	 */
1159 
1160 	if (sdata->reserved_chanctx) {
1161 		struct ieee80211_supported_band *sband = NULL;
1162 		struct sta_info *mgd_sta = NULL;
1163 		enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20;
1164 
1165 		/*
1166 		 * with multi-vif csa driver may call ieee80211_csa_finish()
1167 		 * many times while waiting for other interfaces to use their
1168 		 * reservations
1169 		 */
1170 		if (sdata->reserved_ready)
1171 			goto out;
1172 
1173 		if (sdata->vif.bss_conf.chandef.width !=
1174 		    sdata->csa_chandef.width) {
1175 			/*
1176 			 * For managed interface, we need to also update the AP
1177 			 * station bandwidth and align the rate scale algorithm
1178 			 * on the bandwidth change. Here we only consider the
1179 			 * bandwidth of the new channel definition (as channel
1180 			 * switch flow does not have the full HT/VHT/HE
1181 			 * information), assuming that if additional changes are
1182 			 * required they would be done as part of the processing
1183 			 * of the next beacon from the AP.
1184 			 */
1185 			switch (sdata->csa_chandef.width) {
1186 			case NL80211_CHAN_WIDTH_20_NOHT:
1187 			case NL80211_CHAN_WIDTH_20:
1188 			default:
1189 				bw = IEEE80211_STA_RX_BW_20;
1190 				break;
1191 			case NL80211_CHAN_WIDTH_40:
1192 				bw = IEEE80211_STA_RX_BW_40;
1193 				break;
1194 			case NL80211_CHAN_WIDTH_80:
1195 				bw = IEEE80211_STA_RX_BW_80;
1196 				break;
1197 			case NL80211_CHAN_WIDTH_80P80:
1198 			case NL80211_CHAN_WIDTH_160:
1199 				bw = IEEE80211_STA_RX_BW_160;
1200 				break;
1201 			}
1202 
1203 			mgd_sta = sta_info_get(sdata, ifmgd->bssid);
1204 			sband =
1205 				local->hw.wiphy->bands[sdata->csa_chandef.chan->band];
1206 		}
1207 
1208 		if (sdata->vif.bss_conf.chandef.width >
1209 		    sdata->csa_chandef.width) {
1210 			mgd_sta->sta.bandwidth = bw;
1211 			rate_control_rate_update(local, sband, mgd_sta,
1212 						 IEEE80211_RC_BW_CHANGED);
1213 		}
1214 
1215 		ret = ieee80211_vif_use_reserved_context(sdata);
1216 		if (ret) {
1217 			sdata_info(sdata,
1218 				   "failed to use reserved channel context, disconnecting (err=%d)\n",
1219 				   ret);
1220 			ieee80211_queue_work(&sdata->local->hw,
1221 					     &ifmgd->csa_connection_drop_work);
1222 			goto out;
1223 		}
1224 
1225 		if (sdata->vif.bss_conf.chandef.width <
1226 		    sdata->csa_chandef.width) {
1227 			mgd_sta->sta.bandwidth = bw;
1228 			rate_control_rate_update(local, sband, mgd_sta,
1229 						 IEEE80211_RC_BW_CHANGED);
1230 		}
1231 
1232 		goto out;
1233 	}
1234 
1235 	if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1236 					&sdata->csa_chandef)) {
1237 		sdata_info(sdata,
1238 			   "failed to finalize channel switch, disconnecting\n");
1239 		ieee80211_queue_work(&sdata->local->hw,
1240 				     &ifmgd->csa_connection_drop_work);
1241 		goto out;
1242 	}
1243 
1244 	ifmgd->csa_waiting_bcn = true;
1245 
1246 	ieee80211_sta_reset_beacon_monitor(sdata);
1247 	ieee80211_sta_reset_conn_monitor(sdata);
1248 
1249 out:
1250 	mutex_unlock(&local->chanctx_mtx);
1251 	mutex_unlock(&local->mtx);
1252 	sdata_unlock(sdata);
1253 }
1254 
1255 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1256 {
1257 	struct ieee80211_local *local = sdata->local;
1258 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1259 	int ret;
1260 
1261 	sdata_assert_lock(sdata);
1262 
1263 	WARN_ON(!sdata->vif.csa_active);
1264 
1265 	if (sdata->csa_block_tx) {
1266 		ieee80211_wake_vif_queues(local, sdata,
1267 					  IEEE80211_QUEUE_STOP_REASON_CSA);
1268 		sdata->csa_block_tx = false;
1269 	}
1270 
1271 	sdata->vif.csa_active = false;
1272 	ifmgd->csa_waiting_bcn = false;
1273 
1274 	ret = drv_post_channel_switch(sdata);
1275 	if (ret) {
1276 		sdata_info(sdata,
1277 			   "driver post channel switch failed, disconnecting\n");
1278 		ieee80211_queue_work(&local->hw,
1279 				     &ifmgd->csa_connection_drop_work);
1280 		return;
1281 	}
1282 
1283 	cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1284 }
1285 
1286 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1287 {
1288 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1289 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1290 
1291 	trace_api_chswitch_done(sdata, success);
1292 	if (!success) {
1293 		sdata_info(sdata,
1294 			   "driver channel switch failed, disconnecting\n");
1295 		ieee80211_queue_work(&sdata->local->hw,
1296 				     &ifmgd->csa_connection_drop_work);
1297 	} else {
1298 		ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1299 	}
1300 }
1301 EXPORT_SYMBOL(ieee80211_chswitch_done);
1302 
1303 static void ieee80211_chswitch_timer(struct timer_list *t)
1304 {
1305 	struct ieee80211_sub_if_data *sdata =
1306 		from_timer(sdata, t, u.mgd.chswitch_timer);
1307 
1308 	ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1309 }
1310 
1311 static void
1312 ieee80211_sta_abort_chanswitch(struct ieee80211_sub_if_data *sdata)
1313 {
1314 	struct ieee80211_local *local = sdata->local;
1315 
1316 	if (!local->ops->abort_channel_switch)
1317 		return;
1318 
1319 	mutex_lock(&local->mtx);
1320 
1321 	mutex_lock(&local->chanctx_mtx);
1322 	ieee80211_vif_unreserve_chanctx(sdata);
1323 	mutex_unlock(&local->chanctx_mtx);
1324 
1325 	if (sdata->csa_block_tx)
1326 		ieee80211_wake_vif_queues(local, sdata,
1327 					  IEEE80211_QUEUE_STOP_REASON_CSA);
1328 
1329 	sdata->csa_block_tx = false;
1330 	sdata->vif.csa_active = false;
1331 
1332 	mutex_unlock(&local->mtx);
1333 
1334 	drv_abort_channel_switch(sdata);
1335 }
1336 
1337 static void
1338 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1339 				 u64 timestamp, u32 device_timestamp,
1340 				 struct ieee802_11_elems *elems,
1341 				 bool beacon)
1342 {
1343 	struct ieee80211_local *local = sdata->local;
1344 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1345 	struct cfg80211_bss *cbss = ifmgd->associated;
1346 	struct ieee80211_chanctx_conf *conf;
1347 	struct ieee80211_chanctx *chanctx;
1348 	enum nl80211_band current_band;
1349 	struct ieee80211_csa_ie csa_ie;
1350 	struct ieee80211_channel_switch ch_switch;
1351 	struct ieee80211_bss *bss;
1352 	int res;
1353 
1354 	sdata_assert_lock(sdata);
1355 
1356 	if (!cbss)
1357 		return;
1358 
1359 	if (local->scanning)
1360 		return;
1361 
1362 	current_band = cbss->channel->band;
1363 	bss = (void *)cbss->priv;
1364 	res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1365 					   bss->vht_cap_info,
1366 					   ifmgd->flags,
1367 					   ifmgd->associated->bssid, &csa_ie);
1368 
1369 	if (!res) {
1370 		ch_switch.timestamp = timestamp;
1371 		ch_switch.device_timestamp = device_timestamp;
1372 		ch_switch.block_tx = csa_ie.mode;
1373 		ch_switch.chandef = csa_ie.chandef;
1374 		ch_switch.count = csa_ie.count;
1375 		ch_switch.delay = csa_ie.max_switch_time;
1376 	}
1377 
1378 	if (res < 0) {
1379 		ieee80211_queue_work(&local->hw,
1380 				     &ifmgd->csa_connection_drop_work);
1381 		return;
1382 	}
1383 
1384 	if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) {
1385 		if (res)
1386 			ieee80211_sta_abort_chanswitch(sdata);
1387 		else
1388 			drv_channel_switch_rx_beacon(sdata, &ch_switch);
1389 		return;
1390 	} else if (sdata->vif.csa_active || res) {
1391 		/* disregard subsequent announcements if already processing */
1392 		return;
1393 	}
1394 
1395 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1396 				     IEEE80211_CHAN_DISABLED)) {
1397 		sdata_info(sdata,
1398 			   "AP %pM switches to unsupported channel "
1399 			   "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
1400 			   "disconnecting\n",
1401 			   ifmgd->associated->bssid,
1402 			   csa_ie.chandef.chan->center_freq,
1403 			   csa_ie.chandef.chan->freq_offset,
1404 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1405 			   csa_ie.chandef.freq1_offset,
1406 			   csa_ie.chandef.center_freq2);
1407 		ieee80211_queue_work(&local->hw,
1408 				     &ifmgd->csa_connection_drop_work);
1409 		return;
1410 	}
1411 
1412 	if (cfg80211_chandef_identical(&csa_ie.chandef,
1413 				       &sdata->vif.bss_conf.chandef) &&
1414 	    (!csa_ie.mode || !beacon)) {
1415 		if (ifmgd->csa_ignored_same_chan)
1416 			return;
1417 		sdata_info(sdata,
1418 			   "AP %pM tries to chanswitch to same channel, ignore\n",
1419 			   ifmgd->associated->bssid);
1420 		ifmgd->csa_ignored_same_chan = true;
1421 		return;
1422 	}
1423 
1424 	/*
1425 	 * Drop all TDLS peers - either we disconnect or move to a different
1426 	 * channel from this point on. There's no telling what our peer will do.
1427 	 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1428 	 * have an incompatible wider chandef.
1429 	 */
1430 	ieee80211_teardown_tdls_peers(sdata);
1431 
1432 	mutex_lock(&local->mtx);
1433 	mutex_lock(&local->chanctx_mtx);
1434 	conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1435 					 lockdep_is_held(&local->chanctx_mtx));
1436 	if (!conf) {
1437 		sdata_info(sdata,
1438 			   "no channel context assigned to vif?, disconnecting\n");
1439 		goto drop_connection;
1440 	}
1441 
1442 	chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1443 
1444 	if (local->use_chanctx &&
1445 	    !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1446 		sdata_info(sdata,
1447 			   "driver doesn't support chan-switch with channel contexts\n");
1448 		goto drop_connection;
1449 	}
1450 
1451 	if (drv_pre_channel_switch(sdata, &ch_switch)) {
1452 		sdata_info(sdata,
1453 			   "preparing for channel switch failed, disconnecting\n");
1454 		goto drop_connection;
1455 	}
1456 
1457 	res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1458 					    chanctx->mode, false);
1459 	if (res) {
1460 		sdata_info(sdata,
1461 			   "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1462 			   res);
1463 		goto drop_connection;
1464 	}
1465 	mutex_unlock(&local->chanctx_mtx);
1466 
1467 	sdata->vif.csa_active = true;
1468 	sdata->csa_chandef = csa_ie.chandef;
1469 	sdata->csa_block_tx = csa_ie.mode;
1470 	ifmgd->csa_ignored_same_chan = false;
1471 
1472 	if (sdata->csa_block_tx)
1473 		ieee80211_stop_vif_queues(local, sdata,
1474 					  IEEE80211_QUEUE_STOP_REASON_CSA);
1475 	mutex_unlock(&local->mtx);
1476 
1477 	cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1478 					  csa_ie.count);
1479 
1480 	if (local->ops->channel_switch) {
1481 		/* use driver's channel switch callback */
1482 		drv_channel_switch(local, sdata, &ch_switch);
1483 		return;
1484 	}
1485 
1486 	/* channel switch handled in software */
1487 	if (csa_ie.count <= 1)
1488 		ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1489 	else
1490 		mod_timer(&ifmgd->chswitch_timer,
1491 			  TU_TO_EXP_TIME((csa_ie.count - 1) *
1492 					 cbss->beacon_interval));
1493 	return;
1494  drop_connection:
1495 	/*
1496 	 * This is just so that the disconnect flow will know that
1497 	 * we were trying to switch channel and failed. In case the
1498 	 * mode is 1 (we are not allowed to Tx), we will know not to
1499 	 * send a deauthentication frame. Those two fields will be
1500 	 * reset when the disconnection worker runs.
1501 	 */
1502 	sdata->vif.csa_active = true;
1503 	sdata->csa_block_tx = csa_ie.mode;
1504 
1505 	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1506 	mutex_unlock(&local->chanctx_mtx);
1507 	mutex_unlock(&local->mtx);
1508 }
1509 
1510 static bool
1511 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1512 				 struct ieee80211_channel *channel,
1513 				 const u8 *country_ie, u8 country_ie_len,
1514 				 const u8 *pwr_constr_elem,
1515 				 int *chan_pwr, int *pwr_reduction)
1516 {
1517 	struct ieee80211_country_ie_triplet *triplet;
1518 	int chan = ieee80211_frequency_to_channel(channel->center_freq);
1519 	int i, chan_increment;
1520 	bool have_chan_pwr = false;
1521 
1522 	/* Invalid IE */
1523 	if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1524 		return false;
1525 
1526 	triplet = (void *)(country_ie + 3);
1527 	country_ie_len -= 3;
1528 
1529 	switch (channel->band) {
1530 	default:
1531 		WARN_ON_ONCE(1);
1532 		/* fall through */
1533 	case NL80211_BAND_2GHZ:
1534 	case NL80211_BAND_60GHZ:
1535 		chan_increment = 1;
1536 		break;
1537 	case NL80211_BAND_5GHZ:
1538 	case NL80211_BAND_6GHZ:
1539 		chan_increment = 4;
1540 		break;
1541 	}
1542 
1543 	/* find channel */
1544 	while (country_ie_len >= 3) {
1545 		u8 first_channel = triplet->chans.first_channel;
1546 
1547 		if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1548 			goto next;
1549 
1550 		for (i = 0; i < triplet->chans.num_channels; i++) {
1551 			if (first_channel + i * chan_increment == chan) {
1552 				have_chan_pwr = true;
1553 				*chan_pwr = triplet->chans.max_power;
1554 				break;
1555 			}
1556 		}
1557 		if (have_chan_pwr)
1558 			break;
1559 
1560  next:
1561 		triplet++;
1562 		country_ie_len -= 3;
1563 	}
1564 
1565 	if (have_chan_pwr && pwr_constr_elem)
1566 		*pwr_reduction = *pwr_constr_elem;
1567 	else
1568 		*pwr_reduction = 0;
1569 
1570 	return have_chan_pwr;
1571 }
1572 
1573 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1574 				      struct ieee80211_channel *channel,
1575 				      const u8 *cisco_dtpc_ie,
1576 				      int *pwr_level)
1577 {
1578 	/* From practical testing, the first data byte of the DTPC element
1579 	 * seems to contain the requested dBm level, and the CLI on Cisco
1580 	 * APs clearly state the range is -127 to 127 dBm, which indicates
1581 	 * a signed byte, although it seemingly never actually goes negative.
1582 	 * The other byte seems to always be zero.
1583 	 */
1584 	*pwr_level = (__s8)cisco_dtpc_ie[4];
1585 }
1586 
1587 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1588 				       struct ieee80211_channel *channel,
1589 				       struct ieee80211_mgmt *mgmt,
1590 				       const u8 *country_ie, u8 country_ie_len,
1591 				       const u8 *pwr_constr_ie,
1592 				       const u8 *cisco_dtpc_ie)
1593 {
1594 	bool has_80211h_pwr = false, has_cisco_pwr = false;
1595 	int chan_pwr = 0, pwr_reduction_80211h = 0;
1596 	int pwr_level_cisco, pwr_level_80211h;
1597 	int new_ap_level;
1598 	__le16 capab = mgmt->u.probe_resp.capab_info;
1599 
1600 	if (country_ie &&
1601 	    (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1602 	     capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1603 		has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1604 			sdata, channel, country_ie, country_ie_len,
1605 			pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1606 		pwr_level_80211h =
1607 			max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1608 	}
1609 
1610 	if (cisco_dtpc_ie) {
1611 		ieee80211_find_cisco_dtpc(
1612 			sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1613 		has_cisco_pwr = true;
1614 	}
1615 
1616 	if (!has_80211h_pwr && !has_cisco_pwr)
1617 		return 0;
1618 
1619 	/* If we have both 802.11h and Cisco DTPC, apply both limits
1620 	 * by picking the smallest of the two power levels advertised.
1621 	 */
1622 	if (has_80211h_pwr &&
1623 	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1624 		new_ap_level = pwr_level_80211h;
1625 
1626 		if (sdata->ap_power_level == new_ap_level)
1627 			return 0;
1628 
1629 		sdata_dbg(sdata,
1630 			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1631 			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1632 			  sdata->u.mgd.bssid);
1633 	} else {  /* has_cisco_pwr is always true here. */
1634 		new_ap_level = pwr_level_cisco;
1635 
1636 		if (sdata->ap_power_level == new_ap_level)
1637 			return 0;
1638 
1639 		sdata_dbg(sdata,
1640 			  "Limiting TX power to %d dBm as advertised by %pM\n",
1641 			  pwr_level_cisco, sdata->u.mgd.bssid);
1642 	}
1643 
1644 	sdata->ap_power_level = new_ap_level;
1645 	if (__ieee80211_recalc_txpower(sdata))
1646 		return BSS_CHANGED_TXPOWER;
1647 	return 0;
1648 }
1649 
1650 /* powersave */
1651 static void ieee80211_enable_ps(struct ieee80211_local *local,
1652 				struct ieee80211_sub_if_data *sdata)
1653 {
1654 	struct ieee80211_conf *conf = &local->hw.conf;
1655 
1656 	/*
1657 	 * If we are scanning right now then the parameters will
1658 	 * take effect when scan finishes.
1659 	 */
1660 	if (local->scanning)
1661 		return;
1662 
1663 	if (conf->dynamic_ps_timeout > 0 &&
1664 	    !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1665 		mod_timer(&local->dynamic_ps_timer, jiffies +
1666 			  msecs_to_jiffies(conf->dynamic_ps_timeout));
1667 	} else {
1668 		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1669 			ieee80211_send_nullfunc(local, sdata, true);
1670 
1671 		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1672 		    ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1673 			return;
1674 
1675 		conf->flags |= IEEE80211_CONF_PS;
1676 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1677 	}
1678 }
1679 
1680 static void ieee80211_change_ps(struct ieee80211_local *local)
1681 {
1682 	struct ieee80211_conf *conf = &local->hw.conf;
1683 
1684 	if (local->ps_sdata) {
1685 		ieee80211_enable_ps(local, local->ps_sdata);
1686 	} else if (conf->flags & IEEE80211_CONF_PS) {
1687 		conf->flags &= ~IEEE80211_CONF_PS;
1688 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1689 		del_timer_sync(&local->dynamic_ps_timer);
1690 		cancel_work_sync(&local->dynamic_ps_enable_work);
1691 	}
1692 }
1693 
1694 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1695 {
1696 	struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1697 	struct sta_info *sta = NULL;
1698 	bool authorized = false;
1699 
1700 	if (!mgd->powersave)
1701 		return false;
1702 
1703 	if (mgd->broken_ap)
1704 		return false;
1705 
1706 	if (!mgd->associated)
1707 		return false;
1708 
1709 	if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1710 		return false;
1711 
1712 	if (!mgd->have_beacon)
1713 		return false;
1714 
1715 	rcu_read_lock();
1716 	sta = sta_info_get(sdata, mgd->bssid);
1717 	if (sta)
1718 		authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1719 	rcu_read_unlock();
1720 
1721 	return authorized;
1722 }
1723 
1724 /* need to hold RTNL or interface lock */
1725 void ieee80211_recalc_ps(struct ieee80211_local *local)
1726 {
1727 	struct ieee80211_sub_if_data *sdata, *found = NULL;
1728 	int count = 0;
1729 	int timeout;
1730 
1731 	if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1732 		local->ps_sdata = NULL;
1733 		return;
1734 	}
1735 
1736 	list_for_each_entry(sdata, &local->interfaces, list) {
1737 		if (!ieee80211_sdata_running(sdata))
1738 			continue;
1739 		if (sdata->vif.type == NL80211_IFTYPE_AP) {
1740 			/* If an AP vif is found, then disable PS
1741 			 * by setting the count to zero thereby setting
1742 			 * ps_sdata to NULL.
1743 			 */
1744 			count = 0;
1745 			break;
1746 		}
1747 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
1748 			continue;
1749 		found = sdata;
1750 		count++;
1751 	}
1752 
1753 	if (count == 1 && ieee80211_powersave_allowed(found)) {
1754 		u8 dtimper = found->u.mgd.dtim_period;
1755 
1756 		timeout = local->dynamic_ps_forced_timeout;
1757 		if (timeout < 0)
1758 			timeout = 100;
1759 		local->hw.conf.dynamic_ps_timeout = timeout;
1760 
1761 		/* If the TIM IE is invalid, pretend the value is 1 */
1762 		if (!dtimper)
1763 			dtimper = 1;
1764 
1765 		local->hw.conf.ps_dtim_period = dtimper;
1766 		local->ps_sdata = found;
1767 	} else {
1768 		local->ps_sdata = NULL;
1769 	}
1770 
1771 	ieee80211_change_ps(local);
1772 }
1773 
1774 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1775 {
1776 	bool ps_allowed = ieee80211_powersave_allowed(sdata);
1777 
1778 	if (sdata->vif.bss_conf.ps != ps_allowed) {
1779 		sdata->vif.bss_conf.ps = ps_allowed;
1780 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1781 	}
1782 }
1783 
1784 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1785 {
1786 	struct ieee80211_local *local =
1787 		container_of(work, struct ieee80211_local,
1788 			     dynamic_ps_disable_work);
1789 
1790 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1791 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1792 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1793 	}
1794 
1795 	ieee80211_wake_queues_by_reason(&local->hw,
1796 					IEEE80211_MAX_QUEUE_MAP,
1797 					IEEE80211_QUEUE_STOP_REASON_PS,
1798 					false);
1799 }
1800 
1801 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1802 {
1803 	struct ieee80211_local *local =
1804 		container_of(work, struct ieee80211_local,
1805 			     dynamic_ps_enable_work);
1806 	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1807 	struct ieee80211_if_managed *ifmgd;
1808 	unsigned long flags;
1809 	int q;
1810 
1811 	/* can only happen when PS was just disabled anyway */
1812 	if (!sdata)
1813 		return;
1814 
1815 	ifmgd = &sdata->u.mgd;
1816 
1817 	if (local->hw.conf.flags & IEEE80211_CONF_PS)
1818 		return;
1819 
1820 	if (local->hw.conf.dynamic_ps_timeout > 0) {
1821 		/* don't enter PS if TX frames are pending */
1822 		if (drv_tx_frames_pending(local)) {
1823 			mod_timer(&local->dynamic_ps_timer, jiffies +
1824 				  msecs_to_jiffies(
1825 				  local->hw.conf.dynamic_ps_timeout));
1826 			return;
1827 		}
1828 
1829 		/*
1830 		 * transmission can be stopped by others which leads to
1831 		 * dynamic_ps_timer expiry. Postpone the ps timer if it
1832 		 * is not the actual idle state.
1833 		 */
1834 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1835 		for (q = 0; q < local->hw.queues; q++) {
1836 			if (local->queue_stop_reasons[q]) {
1837 				spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1838 						       flags);
1839 				mod_timer(&local->dynamic_ps_timer, jiffies +
1840 					  msecs_to_jiffies(
1841 					  local->hw.conf.dynamic_ps_timeout));
1842 				return;
1843 			}
1844 		}
1845 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1846 	}
1847 
1848 	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1849 	    !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1850 		if (drv_tx_frames_pending(local)) {
1851 			mod_timer(&local->dynamic_ps_timer, jiffies +
1852 				  msecs_to_jiffies(
1853 				  local->hw.conf.dynamic_ps_timeout));
1854 		} else {
1855 			ieee80211_send_nullfunc(local, sdata, true);
1856 			/* Flush to get the tx status of nullfunc frame */
1857 			ieee80211_flush_queues(local, sdata, false);
1858 		}
1859 	}
1860 
1861 	if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1862 	      ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1863 	    (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1864 		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1865 		local->hw.conf.flags |= IEEE80211_CONF_PS;
1866 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1867 	}
1868 }
1869 
1870 void ieee80211_dynamic_ps_timer(struct timer_list *t)
1871 {
1872 	struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
1873 
1874 	ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1875 }
1876 
1877 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1878 {
1879 	struct delayed_work *delayed_work = to_delayed_work(work);
1880 	struct ieee80211_sub_if_data *sdata =
1881 		container_of(delayed_work, struct ieee80211_sub_if_data,
1882 			     dfs_cac_timer_work);
1883 	struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1884 
1885 	mutex_lock(&sdata->local->mtx);
1886 	if (sdata->wdev.cac_started) {
1887 		ieee80211_vif_release_channel(sdata);
1888 		cfg80211_cac_event(sdata->dev, &chandef,
1889 				   NL80211_RADAR_CAC_FINISHED,
1890 				   GFP_KERNEL);
1891 	}
1892 	mutex_unlock(&sdata->local->mtx);
1893 }
1894 
1895 static bool
1896 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1897 {
1898 	struct ieee80211_local *local = sdata->local;
1899 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1900 	bool ret = false;
1901 	int ac;
1902 
1903 	if (local->hw.queues < IEEE80211_NUM_ACS)
1904 		return false;
1905 
1906 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1907 		struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1908 		int non_acm_ac;
1909 		unsigned long now = jiffies;
1910 
1911 		if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1912 		    tx_tspec->admitted_time &&
1913 		    time_after(now, tx_tspec->time_slice_start + HZ)) {
1914 			tx_tspec->consumed_tx_time = 0;
1915 			tx_tspec->time_slice_start = now;
1916 
1917 			if (tx_tspec->downgraded)
1918 				tx_tspec->action =
1919 					TX_TSPEC_ACTION_STOP_DOWNGRADE;
1920 		}
1921 
1922 		switch (tx_tspec->action) {
1923 		case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1924 			/* take the original parameters */
1925 			if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1926 				sdata_err(sdata,
1927 					  "failed to set TX queue parameters for queue %d\n",
1928 					  ac);
1929 			tx_tspec->action = TX_TSPEC_ACTION_NONE;
1930 			tx_tspec->downgraded = false;
1931 			ret = true;
1932 			break;
1933 		case TX_TSPEC_ACTION_DOWNGRADE:
1934 			if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1935 				tx_tspec->action = TX_TSPEC_ACTION_NONE;
1936 				ret = true;
1937 				break;
1938 			}
1939 			/* downgrade next lower non-ACM AC */
1940 			for (non_acm_ac = ac + 1;
1941 			     non_acm_ac < IEEE80211_NUM_ACS;
1942 			     non_acm_ac++)
1943 				if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1944 					break;
1945 			/* Usually the loop will result in using BK even if it
1946 			 * requires admission control, but such a configuration
1947 			 * makes no sense and we have to transmit somehow - the
1948 			 * AC selection does the same thing.
1949 			 * If we started out trying to downgrade from BK, then
1950 			 * the extra condition here might be needed.
1951 			 */
1952 			if (non_acm_ac >= IEEE80211_NUM_ACS)
1953 				non_acm_ac = IEEE80211_AC_BK;
1954 			if (drv_conf_tx(local, sdata, ac,
1955 					&sdata->tx_conf[non_acm_ac]))
1956 				sdata_err(sdata,
1957 					  "failed to set TX queue parameters for queue %d\n",
1958 					  ac);
1959 			tx_tspec->action = TX_TSPEC_ACTION_NONE;
1960 			ret = true;
1961 			schedule_delayed_work(&ifmgd->tx_tspec_wk,
1962 				tx_tspec->time_slice_start + HZ - now + 1);
1963 			break;
1964 		case TX_TSPEC_ACTION_NONE:
1965 			/* nothing now */
1966 			break;
1967 		}
1968 	}
1969 
1970 	return ret;
1971 }
1972 
1973 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1974 {
1975 	if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1976 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1977 }
1978 
1979 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1980 {
1981 	struct ieee80211_sub_if_data *sdata;
1982 
1983 	sdata = container_of(work, struct ieee80211_sub_if_data,
1984 			     u.mgd.tx_tspec_wk.work);
1985 	ieee80211_sta_handle_tspec_ac_params(sdata);
1986 }
1987 
1988 /* MLME */
1989 static bool
1990 ieee80211_sta_wmm_params(struct ieee80211_local *local,
1991 			 struct ieee80211_sub_if_data *sdata,
1992 			 const u8 *wmm_param, size_t wmm_param_len,
1993 			 const struct ieee80211_mu_edca_param_set *mu_edca)
1994 {
1995 	struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1996 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1997 	size_t left;
1998 	int count, mu_edca_count, ac;
1999 	const u8 *pos;
2000 	u8 uapsd_queues = 0;
2001 
2002 	if (!local->ops->conf_tx)
2003 		return false;
2004 
2005 	if (local->hw.queues < IEEE80211_NUM_ACS)
2006 		return false;
2007 
2008 	if (!wmm_param)
2009 		return false;
2010 
2011 	if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
2012 		return false;
2013 
2014 	if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
2015 		uapsd_queues = ifmgd->uapsd_queues;
2016 
2017 	count = wmm_param[6] & 0x0f;
2018 	/* -1 is the initial value of ifmgd->mu_edca_last_param_set.
2019 	 * if mu_edca was preset before and now it disappeared tell
2020 	 * the driver about it.
2021 	 */
2022 	mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1;
2023 	if (count == ifmgd->wmm_last_param_set &&
2024 	    mu_edca_count == ifmgd->mu_edca_last_param_set)
2025 		return false;
2026 	ifmgd->wmm_last_param_set = count;
2027 	ifmgd->mu_edca_last_param_set = mu_edca_count;
2028 
2029 	pos = wmm_param + 8;
2030 	left = wmm_param_len - 8;
2031 
2032 	memset(&params, 0, sizeof(params));
2033 
2034 	sdata->wmm_acm = 0;
2035 	for (; left >= 4; left -= 4, pos += 4) {
2036 		int aci = (pos[0] >> 5) & 0x03;
2037 		int acm = (pos[0] >> 4) & 0x01;
2038 		bool uapsd = false;
2039 
2040 		switch (aci) {
2041 		case 1: /* AC_BK */
2042 			ac = IEEE80211_AC_BK;
2043 			if (acm)
2044 				sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
2045 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
2046 				uapsd = true;
2047 			params[ac].mu_edca = !!mu_edca;
2048 			if (mu_edca)
2049 				params[ac].mu_edca_param_rec = mu_edca->ac_bk;
2050 			break;
2051 		case 2: /* AC_VI */
2052 			ac = IEEE80211_AC_VI;
2053 			if (acm)
2054 				sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
2055 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
2056 				uapsd = true;
2057 			params[ac].mu_edca = !!mu_edca;
2058 			if (mu_edca)
2059 				params[ac].mu_edca_param_rec = mu_edca->ac_vi;
2060 			break;
2061 		case 3: /* AC_VO */
2062 			ac = IEEE80211_AC_VO;
2063 			if (acm)
2064 				sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
2065 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
2066 				uapsd = true;
2067 			params[ac].mu_edca = !!mu_edca;
2068 			if (mu_edca)
2069 				params[ac].mu_edca_param_rec = mu_edca->ac_vo;
2070 			break;
2071 		case 0: /* AC_BE */
2072 		default:
2073 			ac = IEEE80211_AC_BE;
2074 			if (acm)
2075 				sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
2076 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
2077 				uapsd = true;
2078 			params[ac].mu_edca = !!mu_edca;
2079 			if (mu_edca)
2080 				params[ac].mu_edca_param_rec = mu_edca->ac_be;
2081 			break;
2082 		}
2083 
2084 		params[ac].aifs = pos[0] & 0x0f;
2085 
2086 		if (params[ac].aifs < 2) {
2087 			sdata_info(sdata,
2088 				   "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
2089 				   params[ac].aifs, aci);
2090 			params[ac].aifs = 2;
2091 		}
2092 		params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
2093 		params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
2094 		params[ac].txop = get_unaligned_le16(pos + 2);
2095 		params[ac].acm = acm;
2096 		params[ac].uapsd = uapsd;
2097 
2098 		if (params[ac].cw_min == 0 ||
2099 		    params[ac].cw_min > params[ac].cw_max) {
2100 			sdata_info(sdata,
2101 				   "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
2102 				   params[ac].cw_min, params[ac].cw_max, aci);
2103 			return false;
2104 		}
2105 		ieee80211_regulatory_limit_wmm_params(sdata, &params[ac], ac);
2106 	}
2107 
2108 	/* WMM specification requires all 4 ACIs. */
2109 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2110 		if (params[ac].cw_min == 0) {
2111 			sdata_info(sdata,
2112 				   "AP has invalid WMM params (missing AC %d), using defaults\n",
2113 				   ac);
2114 			return false;
2115 		}
2116 	}
2117 
2118 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2119 		mlme_dbg(sdata,
2120 			 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
2121 			 ac, params[ac].acm,
2122 			 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
2123 			 params[ac].txop, params[ac].uapsd,
2124 			 ifmgd->tx_tspec[ac].downgraded);
2125 		sdata->tx_conf[ac] = params[ac];
2126 		if (!ifmgd->tx_tspec[ac].downgraded &&
2127 		    drv_conf_tx(local, sdata, ac, &params[ac]))
2128 			sdata_err(sdata,
2129 				  "failed to set TX queue parameters for AC %d\n",
2130 				  ac);
2131 	}
2132 
2133 	/* enable WMM or activate new settings */
2134 	sdata->vif.bss_conf.qos = true;
2135 	return true;
2136 }
2137 
2138 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2139 {
2140 	lockdep_assert_held(&sdata->local->mtx);
2141 
2142 	sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
2143 	ieee80211_run_deferred_scan(sdata->local);
2144 }
2145 
2146 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2147 {
2148 	mutex_lock(&sdata->local->mtx);
2149 	__ieee80211_stop_poll(sdata);
2150 	mutex_unlock(&sdata->local->mtx);
2151 }
2152 
2153 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
2154 					   u16 capab, bool erp_valid, u8 erp)
2155 {
2156 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2157 	struct ieee80211_supported_band *sband;
2158 	u32 changed = 0;
2159 	bool use_protection;
2160 	bool use_short_preamble;
2161 	bool use_short_slot;
2162 
2163 	sband = ieee80211_get_sband(sdata);
2164 	if (!sband)
2165 		return changed;
2166 
2167 	if (erp_valid) {
2168 		use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
2169 		use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
2170 	} else {
2171 		use_protection = false;
2172 		use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
2173 	}
2174 
2175 	use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
2176 	if (sband->band == NL80211_BAND_5GHZ ||
2177 	    sband->band == NL80211_BAND_6GHZ)
2178 		use_short_slot = true;
2179 
2180 	if (use_protection != bss_conf->use_cts_prot) {
2181 		bss_conf->use_cts_prot = use_protection;
2182 		changed |= BSS_CHANGED_ERP_CTS_PROT;
2183 	}
2184 
2185 	if (use_short_preamble != bss_conf->use_short_preamble) {
2186 		bss_conf->use_short_preamble = use_short_preamble;
2187 		changed |= BSS_CHANGED_ERP_PREAMBLE;
2188 	}
2189 
2190 	if (use_short_slot != bss_conf->use_short_slot) {
2191 		bss_conf->use_short_slot = use_short_slot;
2192 		changed |= BSS_CHANGED_ERP_SLOT;
2193 	}
2194 
2195 	return changed;
2196 }
2197 
2198 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
2199 				     struct cfg80211_bss *cbss,
2200 				     u32 bss_info_changed)
2201 {
2202 	struct ieee80211_bss *bss = (void *)cbss->priv;
2203 	struct ieee80211_local *local = sdata->local;
2204 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2205 
2206 	bss_info_changed |= BSS_CHANGED_ASSOC;
2207 	bss_info_changed |= ieee80211_handle_bss_capability(sdata,
2208 		bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
2209 
2210 	sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
2211 		beacon_loss_count * bss_conf->beacon_int));
2212 
2213 	sdata->u.mgd.associated = cbss;
2214 	memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
2215 
2216 	ieee80211_check_rate_mask(sdata);
2217 
2218 	sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
2219 
2220 	if (sdata->vif.p2p ||
2221 	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
2222 		const struct cfg80211_bss_ies *ies;
2223 
2224 		rcu_read_lock();
2225 		ies = rcu_dereference(cbss->ies);
2226 		if (ies) {
2227 			int ret;
2228 
2229 			ret = cfg80211_get_p2p_attr(
2230 					ies->data, ies->len,
2231 					IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
2232 					(u8 *) &bss_conf->p2p_noa_attr,
2233 					sizeof(bss_conf->p2p_noa_attr));
2234 			if (ret >= 2) {
2235 				sdata->u.mgd.p2p_noa_index =
2236 					bss_conf->p2p_noa_attr.index;
2237 				bss_info_changed |= BSS_CHANGED_P2P_PS;
2238 			}
2239 		}
2240 		rcu_read_unlock();
2241 	}
2242 
2243 	/* just to be sure */
2244 	ieee80211_stop_poll(sdata);
2245 
2246 	ieee80211_led_assoc(local, 1);
2247 
2248 	if (sdata->u.mgd.have_beacon) {
2249 		/*
2250 		 * If the AP is buggy we may get here with no DTIM period
2251 		 * known, so assume it's 1 which is the only safe assumption
2252 		 * in that case, although if the TIM IE is broken powersave
2253 		 * probably just won't work at all.
2254 		 */
2255 		bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
2256 		bss_conf->beacon_rate = bss->beacon_rate;
2257 		bss_info_changed |= BSS_CHANGED_BEACON_INFO;
2258 	} else {
2259 		bss_conf->beacon_rate = NULL;
2260 		bss_conf->dtim_period = 0;
2261 	}
2262 
2263 	bss_conf->assoc = 1;
2264 
2265 	/* Tell the driver to monitor connection quality (if supported) */
2266 	if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
2267 	    bss_conf->cqm_rssi_thold)
2268 		bss_info_changed |= BSS_CHANGED_CQM;
2269 
2270 	/* Enable ARP filtering */
2271 	if (bss_conf->arp_addr_cnt)
2272 		bss_info_changed |= BSS_CHANGED_ARP_FILTER;
2273 
2274 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
2275 
2276 	mutex_lock(&local->iflist_mtx);
2277 	ieee80211_recalc_ps(local);
2278 	mutex_unlock(&local->iflist_mtx);
2279 
2280 	ieee80211_recalc_smps(sdata);
2281 	ieee80211_recalc_ps_vif(sdata);
2282 
2283 	netif_carrier_on(sdata->dev);
2284 }
2285 
2286 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2287 				   u16 stype, u16 reason, bool tx,
2288 				   u8 *frame_buf)
2289 {
2290 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2291 	struct ieee80211_local *local = sdata->local;
2292 	u32 changed = 0;
2293 
2294 	sdata_assert_lock(sdata);
2295 
2296 	if (WARN_ON_ONCE(tx && !frame_buf))
2297 		return;
2298 
2299 	if (WARN_ON(!ifmgd->associated))
2300 		return;
2301 
2302 	ieee80211_stop_poll(sdata);
2303 
2304 	ifmgd->associated = NULL;
2305 	netif_carrier_off(sdata->dev);
2306 
2307 	/*
2308 	 * if we want to get out of ps before disassoc (why?) we have
2309 	 * to do it before sending disassoc, as otherwise the null-packet
2310 	 * won't be valid.
2311 	 */
2312 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2313 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2314 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2315 	}
2316 	local->ps_sdata = NULL;
2317 
2318 	/* disable per-vif ps */
2319 	ieee80211_recalc_ps_vif(sdata);
2320 
2321 	/* make sure ongoing transmission finishes */
2322 	synchronize_net();
2323 
2324 	/*
2325 	 * drop any frame before deauth/disassoc, this can be data or
2326 	 * management frame. Since we are disconnecting, we should not
2327 	 * insist sending these frames which can take time and delay
2328 	 * the disconnection and possible the roaming.
2329 	 */
2330 	if (tx)
2331 		ieee80211_flush_queues(local, sdata, true);
2332 
2333 	/* deauthenticate/disassociate now */
2334 	if (tx || frame_buf) {
2335 		/*
2336 		 * In multi channel scenarios guarantee that the virtual
2337 		 * interface is granted immediate airtime to transmit the
2338 		 * deauthentication frame by calling mgd_prepare_tx, if the
2339 		 * driver requested so.
2340 		 */
2341 		if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
2342 		    !ifmgd->have_beacon)
2343 			drv_mgd_prepare_tx(sdata->local, sdata, 0);
2344 
2345 		ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid,
2346 					       ifmgd->bssid, stype, reason,
2347 					       tx, frame_buf);
2348 	}
2349 
2350 	/* flush out frame - make sure the deauth was actually sent */
2351 	if (tx)
2352 		ieee80211_flush_queues(local, sdata, false);
2353 
2354 	/* clear bssid only after building the needed mgmt frames */
2355 	eth_zero_addr(ifmgd->bssid);
2356 
2357 	/* remove AP and TDLS peers */
2358 	sta_info_flush(sdata);
2359 
2360 	/* finally reset all BSS / config parameters */
2361 	changed |= ieee80211_reset_erp_info(sdata);
2362 
2363 	ieee80211_led_assoc(local, 0);
2364 	changed |= BSS_CHANGED_ASSOC;
2365 	sdata->vif.bss_conf.assoc = false;
2366 
2367 	ifmgd->p2p_noa_index = -1;
2368 	memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2369 	       sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2370 
2371 	/* on the next assoc, re-program HT/VHT parameters */
2372 	memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2373 	memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2374 	memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2375 	memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2376 
2377 	/* reset MU-MIMO ownership and group data */
2378 	memset(sdata->vif.bss_conf.mu_group.membership, 0,
2379 	       sizeof(sdata->vif.bss_conf.mu_group.membership));
2380 	memset(sdata->vif.bss_conf.mu_group.position, 0,
2381 	       sizeof(sdata->vif.bss_conf.mu_group.position));
2382 	changed |= BSS_CHANGED_MU_GROUPS;
2383 	sdata->vif.mu_mimo_owner = false;
2384 
2385 	sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2386 
2387 	del_timer_sync(&local->dynamic_ps_timer);
2388 	cancel_work_sync(&local->dynamic_ps_enable_work);
2389 
2390 	/* Disable ARP filtering */
2391 	if (sdata->vif.bss_conf.arp_addr_cnt)
2392 		changed |= BSS_CHANGED_ARP_FILTER;
2393 
2394 	sdata->vif.bss_conf.qos = false;
2395 	changed |= BSS_CHANGED_QOS;
2396 
2397 	/* The BSSID (not really interesting) and HT changed */
2398 	changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2399 	ieee80211_bss_info_change_notify(sdata, changed);
2400 
2401 	/* disassociated - set to defaults now */
2402 	ieee80211_set_wmm_default(sdata, false, false);
2403 
2404 	del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2405 	del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2406 	del_timer_sync(&sdata->u.mgd.timer);
2407 	del_timer_sync(&sdata->u.mgd.chswitch_timer);
2408 
2409 	sdata->vif.bss_conf.dtim_period = 0;
2410 	sdata->vif.bss_conf.beacon_rate = NULL;
2411 
2412 	ifmgd->have_beacon = false;
2413 
2414 	ifmgd->flags = 0;
2415 	mutex_lock(&local->mtx);
2416 	ieee80211_vif_release_channel(sdata);
2417 
2418 	sdata->vif.csa_active = false;
2419 	ifmgd->csa_waiting_bcn = false;
2420 	ifmgd->csa_ignored_same_chan = false;
2421 	if (sdata->csa_block_tx) {
2422 		ieee80211_wake_vif_queues(local, sdata,
2423 					  IEEE80211_QUEUE_STOP_REASON_CSA);
2424 		sdata->csa_block_tx = false;
2425 	}
2426 	mutex_unlock(&local->mtx);
2427 
2428 	/* existing TX TSPEC sessions no longer exist */
2429 	memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2430 	cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2431 
2432 	sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2433 }
2434 
2435 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2436 			     struct ieee80211_hdr *hdr)
2437 {
2438 	/*
2439 	 * We can postpone the mgd.timer whenever receiving unicast frames
2440 	 * from AP because we know that the connection is working both ways
2441 	 * at that time. But multicast frames (and hence also beacons) must
2442 	 * be ignored here, because we need to trigger the timer during
2443 	 * data idle periods for sending the periodic probe request to the
2444 	 * AP we're connected to.
2445 	 */
2446 	if (is_multicast_ether_addr(hdr->addr1))
2447 		return;
2448 
2449 	ieee80211_sta_reset_conn_monitor(sdata);
2450 }
2451 
2452 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2453 {
2454 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2455 	struct ieee80211_local *local = sdata->local;
2456 
2457 	mutex_lock(&local->mtx);
2458 	if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2459 		goto out;
2460 
2461 	__ieee80211_stop_poll(sdata);
2462 
2463 	mutex_lock(&local->iflist_mtx);
2464 	ieee80211_recalc_ps(local);
2465 	mutex_unlock(&local->iflist_mtx);
2466 
2467 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2468 		goto out;
2469 
2470 	/*
2471 	 * We've received a probe response, but are not sure whether
2472 	 * we have or will be receiving any beacons or data, so let's
2473 	 * schedule the timers again, just in case.
2474 	 */
2475 	ieee80211_sta_reset_beacon_monitor(sdata);
2476 
2477 	mod_timer(&ifmgd->conn_mon_timer,
2478 		  round_jiffies_up(jiffies +
2479 				   IEEE80211_CONNECTION_IDLE_TIME));
2480 out:
2481 	mutex_unlock(&local->mtx);
2482 }
2483 
2484 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2485 					   struct ieee80211_hdr *hdr,
2486 					   u16 tx_time)
2487 {
2488 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2489 	u16 tid = ieee80211_get_tid(hdr);
2490 	int ac = ieee80211_ac_from_tid(tid);
2491 	struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2492 	unsigned long now = jiffies;
2493 
2494 	if (likely(!tx_tspec->admitted_time))
2495 		return;
2496 
2497 	if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2498 		tx_tspec->consumed_tx_time = 0;
2499 		tx_tspec->time_slice_start = now;
2500 
2501 		if (tx_tspec->downgraded) {
2502 			tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2503 			schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2504 		}
2505 	}
2506 
2507 	if (tx_tspec->downgraded)
2508 		return;
2509 
2510 	tx_tspec->consumed_tx_time += tx_time;
2511 
2512 	if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2513 		tx_tspec->downgraded = true;
2514 		tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2515 		schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2516 	}
2517 }
2518 
2519 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2520 			     struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2521 {
2522 	ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2523 
2524 	if (!ieee80211_is_data(hdr->frame_control))
2525 	    return;
2526 
2527 	if (ieee80211_is_any_nullfunc(hdr->frame_control) &&
2528 	    sdata->u.mgd.probe_send_count > 0) {
2529 		if (ack)
2530 			ieee80211_sta_reset_conn_monitor(sdata);
2531 		else
2532 			sdata->u.mgd.nullfunc_failed = true;
2533 		ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2534 		return;
2535 	}
2536 
2537 	if (ack)
2538 		ieee80211_sta_reset_conn_monitor(sdata);
2539 }
2540 
2541 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
2542 					  const u8 *src, const u8 *dst,
2543 					  const u8 *ssid, size_t ssid_len,
2544 					  struct ieee80211_channel *channel)
2545 {
2546 	struct sk_buff *skb;
2547 
2548 	skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
2549 					ssid, ssid_len, NULL, 0,
2550 					IEEE80211_PROBE_FLAG_DIRECTED);
2551 	if (skb)
2552 		ieee80211_tx_skb(sdata, skb);
2553 }
2554 
2555 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2556 {
2557 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2558 	const u8 *ssid;
2559 	u8 *dst = ifmgd->associated->bssid;
2560 	u8 unicast_limit = max(1, max_probe_tries - 3);
2561 	struct sta_info *sta;
2562 
2563 	/*
2564 	 * Try sending broadcast probe requests for the last three
2565 	 * probe requests after the first ones failed since some
2566 	 * buggy APs only support broadcast probe requests.
2567 	 */
2568 	if (ifmgd->probe_send_count >= unicast_limit)
2569 		dst = NULL;
2570 
2571 	/*
2572 	 * When the hardware reports an accurate Tx ACK status, it's
2573 	 * better to send a nullfunc frame instead of a probe request,
2574 	 * as it will kick us off the AP quickly if we aren't associated
2575 	 * anymore. The timeout will be reset if the frame is ACKed by
2576 	 * the AP.
2577 	 */
2578 	ifmgd->probe_send_count++;
2579 
2580 	if (dst) {
2581 		mutex_lock(&sdata->local->sta_mtx);
2582 		sta = sta_info_get(sdata, dst);
2583 		if (!WARN_ON(!sta))
2584 			ieee80211_check_fast_rx(sta);
2585 		mutex_unlock(&sdata->local->sta_mtx);
2586 	}
2587 
2588 	if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2589 		ifmgd->nullfunc_failed = false;
2590 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
2591 			ifmgd->probe_send_count--;
2592 		else
2593 			ieee80211_send_nullfunc(sdata->local, sdata, false);
2594 	} else {
2595 		int ssid_len;
2596 
2597 		rcu_read_lock();
2598 		ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2599 		if (WARN_ON_ONCE(ssid == NULL))
2600 			ssid_len = 0;
2601 		else
2602 			ssid_len = ssid[1];
2603 
2604 		ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
2605 					      ssid + 2, ssid_len,
2606 					      ifmgd->associated->channel);
2607 		rcu_read_unlock();
2608 	}
2609 
2610 	ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2611 	run_again(sdata, ifmgd->probe_timeout);
2612 }
2613 
2614 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2615 				   bool beacon)
2616 {
2617 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2618 	bool already = false;
2619 
2620 	if (!ieee80211_sdata_running(sdata))
2621 		return;
2622 
2623 	sdata_lock(sdata);
2624 
2625 	if (!ifmgd->associated)
2626 		goto out;
2627 
2628 	mutex_lock(&sdata->local->mtx);
2629 
2630 	if (sdata->local->tmp_channel || sdata->local->scanning) {
2631 		mutex_unlock(&sdata->local->mtx);
2632 		goto out;
2633 	}
2634 
2635 	if (beacon) {
2636 		mlme_dbg_ratelimited(sdata,
2637 				     "detected beacon loss from AP (missed %d beacons) - probing\n",
2638 				     beacon_loss_count);
2639 
2640 		ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2641 	}
2642 
2643 	/*
2644 	 * The driver/our work has already reported this event or the
2645 	 * connection monitoring has kicked in and we have already sent
2646 	 * a probe request. Or maybe the AP died and the driver keeps
2647 	 * reporting until we disassociate...
2648 	 *
2649 	 * In either case we have to ignore the current call to this
2650 	 * function (except for setting the correct probe reason bit)
2651 	 * because otherwise we would reset the timer every time and
2652 	 * never check whether we received a probe response!
2653 	 */
2654 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2655 		already = true;
2656 
2657 	ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2658 
2659 	mutex_unlock(&sdata->local->mtx);
2660 
2661 	if (already)
2662 		goto out;
2663 
2664 	mutex_lock(&sdata->local->iflist_mtx);
2665 	ieee80211_recalc_ps(sdata->local);
2666 	mutex_unlock(&sdata->local->iflist_mtx);
2667 
2668 	ifmgd->probe_send_count = 0;
2669 	ieee80211_mgd_probe_ap_send(sdata);
2670  out:
2671 	sdata_unlock(sdata);
2672 }
2673 
2674 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2675 					  struct ieee80211_vif *vif)
2676 {
2677 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2678 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2679 	struct cfg80211_bss *cbss;
2680 	struct sk_buff *skb;
2681 	const u8 *ssid;
2682 	int ssid_len;
2683 
2684 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2685 		return NULL;
2686 
2687 	sdata_assert_lock(sdata);
2688 
2689 	if (ifmgd->associated)
2690 		cbss = ifmgd->associated;
2691 	else if (ifmgd->auth_data)
2692 		cbss = ifmgd->auth_data->bss;
2693 	else if (ifmgd->assoc_data)
2694 		cbss = ifmgd->assoc_data->bss;
2695 	else
2696 		return NULL;
2697 
2698 	rcu_read_lock();
2699 	ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2700 	if (WARN_ONCE(!ssid || ssid[1] > IEEE80211_MAX_SSID_LEN,
2701 		      "invalid SSID element (len=%d)", ssid ? ssid[1] : -1))
2702 		ssid_len = 0;
2703 	else
2704 		ssid_len = ssid[1];
2705 
2706 	skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2707 					(u32) -1, cbss->channel,
2708 					ssid + 2, ssid_len,
2709 					NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
2710 	rcu_read_unlock();
2711 
2712 	return skb;
2713 }
2714 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2715 
2716 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2717 					const u8 *buf, size_t len, bool tx,
2718 					u16 reason)
2719 {
2720 	struct ieee80211_event event = {
2721 		.type = MLME_EVENT,
2722 		.u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2723 		.u.mlme.reason = reason,
2724 	};
2725 
2726 	if (tx)
2727 		cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2728 	else
2729 		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2730 
2731 	drv_event_callback(sdata->local, sdata, &event);
2732 }
2733 
2734 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2735 {
2736 	struct ieee80211_local *local = sdata->local;
2737 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2738 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2739 	bool tx;
2740 
2741 	sdata_lock(sdata);
2742 	if (!ifmgd->associated) {
2743 		sdata_unlock(sdata);
2744 		return;
2745 	}
2746 
2747 	tx = !sdata->csa_block_tx;
2748 
2749 	/* AP is probably out of range (or not reachable for another reason) so
2750 	 * remove the bss struct for that AP.
2751 	 */
2752 	cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated);
2753 
2754 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2755 			       WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2756 			       tx, frame_buf);
2757 	mutex_lock(&local->mtx);
2758 	sdata->vif.csa_active = false;
2759 	ifmgd->csa_waiting_bcn = false;
2760 	if (sdata->csa_block_tx) {
2761 		ieee80211_wake_vif_queues(local, sdata,
2762 					  IEEE80211_QUEUE_STOP_REASON_CSA);
2763 		sdata->csa_block_tx = false;
2764 	}
2765 	mutex_unlock(&local->mtx);
2766 
2767 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
2768 				    WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2769 
2770 	sdata_unlock(sdata);
2771 }
2772 
2773 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2774 {
2775 	struct ieee80211_sub_if_data *sdata =
2776 		container_of(work, struct ieee80211_sub_if_data,
2777 			     u.mgd.beacon_connection_loss_work);
2778 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2779 
2780 	if (ifmgd->associated)
2781 		ifmgd->beacon_loss_count++;
2782 
2783 	if (ifmgd->connection_loss) {
2784 		sdata_info(sdata, "Connection to AP %pM lost\n",
2785 			   ifmgd->bssid);
2786 		__ieee80211_disconnect(sdata);
2787 	} else {
2788 		ieee80211_mgd_probe_ap(sdata, true);
2789 	}
2790 }
2791 
2792 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2793 {
2794 	struct ieee80211_sub_if_data *sdata =
2795 		container_of(work, struct ieee80211_sub_if_data,
2796 			     u.mgd.csa_connection_drop_work);
2797 
2798 	__ieee80211_disconnect(sdata);
2799 }
2800 
2801 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2802 {
2803 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2804 	struct ieee80211_hw *hw = &sdata->local->hw;
2805 
2806 	trace_api_beacon_loss(sdata);
2807 
2808 	sdata->u.mgd.connection_loss = false;
2809 	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2810 }
2811 EXPORT_SYMBOL(ieee80211_beacon_loss);
2812 
2813 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2814 {
2815 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2816 	struct ieee80211_hw *hw = &sdata->local->hw;
2817 
2818 	trace_api_connection_loss(sdata);
2819 
2820 	sdata->u.mgd.connection_loss = true;
2821 	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2822 }
2823 EXPORT_SYMBOL(ieee80211_connection_loss);
2824 
2825 
2826 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2827 					bool assoc)
2828 {
2829 	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2830 
2831 	sdata_assert_lock(sdata);
2832 
2833 	if (!assoc) {
2834 		/*
2835 		 * we are not authenticated yet, the only timer that could be
2836 		 * running is the timeout for the authentication response which
2837 		 * which is not relevant anymore.
2838 		 */
2839 		del_timer_sync(&sdata->u.mgd.timer);
2840 		sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2841 
2842 		eth_zero_addr(sdata->u.mgd.bssid);
2843 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2844 		sdata->u.mgd.flags = 0;
2845 		mutex_lock(&sdata->local->mtx);
2846 		ieee80211_vif_release_channel(sdata);
2847 		mutex_unlock(&sdata->local->mtx);
2848 	}
2849 
2850 	cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2851 	kfree(auth_data);
2852 	sdata->u.mgd.auth_data = NULL;
2853 }
2854 
2855 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2856 					 bool assoc, bool abandon)
2857 {
2858 	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2859 
2860 	sdata_assert_lock(sdata);
2861 
2862 	if (!assoc) {
2863 		/*
2864 		 * we are not associated yet, the only timer that could be
2865 		 * running is the timeout for the association response which
2866 		 * which is not relevant anymore.
2867 		 */
2868 		del_timer_sync(&sdata->u.mgd.timer);
2869 		sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2870 
2871 		eth_zero_addr(sdata->u.mgd.bssid);
2872 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2873 		sdata->u.mgd.flags = 0;
2874 		sdata->vif.mu_mimo_owner = false;
2875 
2876 		mutex_lock(&sdata->local->mtx);
2877 		ieee80211_vif_release_channel(sdata);
2878 		mutex_unlock(&sdata->local->mtx);
2879 
2880 		if (abandon)
2881 			cfg80211_abandon_assoc(sdata->dev, assoc_data->bss);
2882 	}
2883 
2884 	kfree(assoc_data);
2885 	sdata->u.mgd.assoc_data = NULL;
2886 }
2887 
2888 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2889 				     struct ieee80211_mgmt *mgmt, size_t len)
2890 {
2891 	struct ieee80211_local *local = sdata->local;
2892 	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2893 	u8 *pos;
2894 	struct ieee802_11_elems elems;
2895 	u32 tx_flags = 0;
2896 
2897 	pos = mgmt->u.auth.variable;
2898 	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
2899 			       mgmt->bssid, auth_data->bss->bssid);
2900 	if (!elems.challenge)
2901 		return;
2902 	auth_data->expected_transaction = 4;
2903 	drv_mgd_prepare_tx(sdata->local, sdata, 0);
2904 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2905 		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2906 			   IEEE80211_TX_INTFL_MLME_CONN_TX;
2907 	ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2908 			    elems.challenge - 2, elems.challenge_len + 2,
2909 			    auth_data->bss->bssid, auth_data->bss->bssid,
2910 			    auth_data->key, auth_data->key_len,
2911 			    auth_data->key_idx, tx_flags);
2912 }
2913 
2914 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata,
2915 				    const u8 *bssid)
2916 {
2917 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2918 	struct sta_info *sta;
2919 	bool result = true;
2920 
2921 	sdata_info(sdata, "authenticated\n");
2922 	ifmgd->auth_data->done = true;
2923 	ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2924 	ifmgd->auth_data->timeout_started = true;
2925 	run_again(sdata, ifmgd->auth_data->timeout);
2926 
2927 	/* move station state to auth */
2928 	mutex_lock(&sdata->local->sta_mtx);
2929 	sta = sta_info_get(sdata, bssid);
2930 	if (!sta) {
2931 		WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2932 		result = false;
2933 		goto out;
2934 	}
2935 	if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2936 		sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2937 		result = false;
2938 		goto out;
2939 	}
2940 
2941 out:
2942 	mutex_unlock(&sdata->local->sta_mtx);
2943 	return result;
2944 }
2945 
2946 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2947 				   struct ieee80211_mgmt *mgmt, size_t len)
2948 {
2949 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2950 	u8 bssid[ETH_ALEN];
2951 	u16 auth_alg, auth_transaction, status_code;
2952 	struct ieee80211_event event = {
2953 		.type = MLME_EVENT,
2954 		.u.mlme.data = AUTH_EVENT,
2955 	};
2956 
2957 	sdata_assert_lock(sdata);
2958 
2959 	if (len < 24 + 6)
2960 		return;
2961 
2962 	if (!ifmgd->auth_data || ifmgd->auth_data->done)
2963 		return;
2964 
2965 	memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2966 
2967 	if (!ether_addr_equal(bssid, mgmt->bssid))
2968 		return;
2969 
2970 	auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2971 	auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2972 	status_code = le16_to_cpu(mgmt->u.auth.status_code);
2973 
2974 	if (auth_alg != ifmgd->auth_data->algorithm ||
2975 	    (auth_alg != WLAN_AUTH_SAE &&
2976 	     auth_transaction != ifmgd->auth_data->expected_transaction) ||
2977 	    (auth_alg == WLAN_AUTH_SAE &&
2978 	     (auth_transaction < ifmgd->auth_data->expected_transaction ||
2979 	      auth_transaction > 2))) {
2980 		sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2981 			   mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2982 			   auth_transaction,
2983 			   ifmgd->auth_data->expected_transaction);
2984 		return;
2985 	}
2986 
2987 	if (status_code != WLAN_STATUS_SUCCESS) {
2988 		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2989 
2990 		if (auth_alg == WLAN_AUTH_SAE &&
2991 		    status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED)
2992 			return;
2993 
2994 		sdata_info(sdata, "%pM denied authentication (status %d)\n",
2995 			   mgmt->sa, status_code);
2996 		ieee80211_destroy_auth_data(sdata, false);
2997 		event.u.mlme.status = MLME_DENIED;
2998 		event.u.mlme.reason = status_code;
2999 		drv_event_callback(sdata->local, sdata, &event);
3000 		return;
3001 	}
3002 
3003 	switch (ifmgd->auth_data->algorithm) {
3004 	case WLAN_AUTH_OPEN:
3005 	case WLAN_AUTH_LEAP:
3006 	case WLAN_AUTH_FT:
3007 	case WLAN_AUTH_SAE:
3008 	case WLAN_AUTH_FILS_SK:
3009 	case WLAN_AUTH_FILS_SK_PFS:
3010 	case WLAN_AUTH_FILS_PK:
3011 		break;
3012 	case WLAN_AUTH_SHARED_KEY:
3013 		if (ifmgd->auth_data->expected_transaction != 4) {
3014 			ieee80211_auth_challenge(sdata, mgmt, len);
3015 			/* need another frame */
3016 			return;
3017 		}
3018 		break;
3019 	default:
3020 		WARN_ONCE(1, "invalid auth alg %d",
3021 			  ifmgd->auth_data->algorithm);
3022 		return;
3023 	}
3024 
3025 	event.u.mlme.status = MLME_SUCCESS;
3026 	drv_event_callback(sdata->local, sdata, &event);
3027 	if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
3028 	    (auth_transaction == 2 &&
3029 	     ifmgd->auth_data->expected_transaction == 2)) {
3030 		if (!ieee80211_mark_sta_auth(sdata, bssid))
3031 			return; /* ignore frame -- wait for timeout */
3032 	} else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
3033 		   auth_transaction == 2) {
3034 		sdata_info(sdata, "SAE peer confirmed\n");
3035 		ifmgd->auth_data->peer_confirmed = true;
3036 	}
3037 
3038 	cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3039 }
3040 
3041 #define case_WLAN(type) \
3042 	case WLAN_REASON_##type: return #type
3043 
3044 const char *ieee80211_get_reason_code_string(u16 reason_code)
3045 {
3046 	switch (reason_code) {
3047 	case_WLAN(UNSPECIFIED);
3048 	case_WLAN(PREV_AUTH_NOT_VALID);
3049 	case_WLAN(DEAUTH_LEAVING);
3050 	case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
3051 	case_WLAN(DISASSOC_AP_BUSY);
3052 	case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
3053 	case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
3054 	case_WLAN(DISASSOC_STA_HAS_LEFT);
3055 	case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
3056 	case_WLAN(DISASSOC_BAD_POWER);
3057 	case_WLAN(DISASSOC_BAD_SUPP_CHAN);
3058 	case_WLAN(INVALID_IE);
3059 	case_WLAN(MIC_FAILURE);
3060 	case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
3061 	case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
3062 	case_WLAN(IE_DIFFERENT);
3063 	case_WLAN(INVALID_GROUP_CIPHER);
3064 	case_WLAN(INVALID_PAIRWISE_CIPHER);
3065 	case_WLAN(INVALID_AKMP);
3066 	case_WLAN(UNSUPP_RSN_VERSION);
3067 	case_WLAN(INVALID_RSN_IE_CAP);
3068 	case_WLAN(IEEE8021X_FAILED);
3069 	case_WLAN(CIPHER_SUITE_REJECTED);
3070 	case_WLAN(DISASSOC_UNSPECIFIED_QOS);
3071 	case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
3072 	case_WLAN(DISASSOC_LOW_ACK);
3073 	case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
3074 	case_WLAN(QSTA_LEAVE_QBSS);
3075 	case_WLAN(QSTA_NOT_USE);
3076 	case_WLAN(QSTA_REQUIRE_SETUP);
3077 	case_WLAN(QSTA_TIMEOUT);
3078 	case_WLAN(QSTA_CIPHER_NOT_SUPP);
3079 	case_WLAN(MESH_PEER_CANCELED);
3080 	case_WLAN(MESH_MAX_PEERS);
3081 	case_WLAN(MESH_CONFIG);
3082 	case_WLAN(MESH_CLOSE);
3083 	case_WLAN(MESH_MAX_RETRIES);
3084 	case_WLAN(MESH_CONFIRM_TIMEOUT);
3085 	case_WLAN(MESH_INVALID_GTK);
3086 	case_WLAN(MESH_INCONSISTENT_PARAM);
3087 	case_WLAN(MESH_INVALID_SECURITY);
3088 	case_WLAN(MESH_PATH_ERROR);
3089 	case_WLAN(MESH_PATH_NOFORWARD);
3090 	case_WLAN(MESH_PATH_DEST_UNREACHABLE);
3091 	case_WLAN(MAC_EXISTS_IN_MBSS);
3092 	case_WLAN(MESH_CHAN_REGULATORY);
3093 	case_WLAN(MESH_CHAN);
3094 	default: return "<unknown>";
3095 	}
3096 }
3097 
3098 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
3099 				     struct ieee80211_mgmt *mgmt, size_t len)
3100 {
3101 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3102 	u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
3103 
3104 	sdata_assert_lock(sdata);
3105 
3106 	if (len < 24 + 2)
3107 		return;
3108 
3109 	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3110 		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3111 		return;
3112 	}
3113 
3114 	if (ifmgd->associated &&
3115 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
3116 		const u8 *bssid = ifmgd->associated->bssid;
3117 
3118 		sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
3119 			   bssid, reason_code,
3120 			   ieee80211_get_reason_code_string(reason_code));
3121 
3122 		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3123 
3124 		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
3125 					    reason_code);
3126 		return;
3127 	}
3128 
3129 	if (ifmgd->assoc_data &&
3130 	    ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3131 		const u8 *bssid = ifmgd->assoc_data->bss->bssid;
3132 
3133 		sdata_info(sdata,
3134 			   "deauthenticated from %pM while associating (Reason: %u=%s)\n",
3135 			   bssid, reason_code,
3136 			   ieee80211_get_reason_code_string(reason_code));
3137 
3138 		ieee80211_destroy_assoc_data(sdata, false, true);
3139 
3140 		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3141 		return;
3142 	}
3143 }
3144 
3145 
3146 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
3147 				       struct ieee80211_mgmt *mgmt, size_t len)
3148 {
3149 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3150 	u16 reason_code;
3151 
3152 	sdata_assert_lock(sdata);
3153 
3154 	if (len < 24 + 2)
3155 		return;
3156 
3157 	if (!ifmgd->associated ||
3158 	    !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3159 		return;
3160 
3161 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
3162 
3163 	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3164 		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3165 		return;
3166 	}
3167 
3168 	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
3169 		   mgmt->sa, reason_code,
3170 		   ieee80211_get_reason_code_string(reason_code));
3171 
3172 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3173 
3174 	ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
3175 }
3176 
3177 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
3178 				u8 *supp_rates, unsigned int supp_rates_len,
3179 				u32 *rates, u32 *basic_rates,
3180 				bool *have_higher_than_11mbit,
3181 				int *min_rate, int *min_rate_index,
3182 				int shift)
3183 {
3184 	int i, j;
3185 
3186 	for (i = 0; i < supp_rates_len; i++) {
3187 		int rate = supp_rates[i] & 0x7f;
3188 		bool is_basic = !!(supp_rates[i] & 0x80);
3189 
3190 		if ((rate * 5 * (1 << shift)) > 110)
3191 			*have_higher_than_11mbit = true;
3192 
3193 		/*
3194 		 * Skip HT, VHT and HE BSS membership selectors since they're
3195 		 * not rates.
3196 		 *
3197 		 * Note: Even though the membership selector and the basic
3198 		 *	 rate flag share the same bit, they are not exactly
3199 		 *	 the same.
3200 		 */
3201 		if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
3202 		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
3203 		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY))
3204 			continue;
3205 
3206 		for (j = 0; j < sband->n_bitrates; j++) {
3207 			struct ieee80211_rate *br;
3208 			int brate;
3209 
3210 			br = &sband->bitrates[j];
3211 
3212 			brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
3213 			if (brate == rate) {
3214 				*rates |= BIT(j);
3215 				if (is_basic)
3216 					*basic_rates |= BIT(j);
3217 				if ((rate * 5) < *min_rate) {
3218 					*min_rate = rate * 5;
3219 					*min_rate_index = j;
3220 				}
3221 				break;
3222 			}
3223 		}
3224 	}
3225 }
3226 
3227 static bool ieee80211_twt_req_supported(const struct sta_info *sta,
3228 					const struct ieee802_11_elems *elems)
3229 {
3230 	if (elems->ext_capab_len < 10)
3231 		return false;
3232 
3233 	if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT))
3234 		return false;
3235 
3236 	return sta->sta.he_cap.he_cap_elem.mac_cap_info[0] &
3237 		IEEE80211_HE_MAC_CAP0_TWT_RES;
3238 }
3239 
3240 static int ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata,
3241 				    struct sta_info *sta,
3242 				    struct ieee802_11_elems *elems)
3243 {
3244 	bool twt = ieee80211_twt_req_supported(sta, elems);
3245 
3246 	if (sdata->vif.bss_conf.twt_requester != twt) {
3247 		sdata->vif.bss_conf.twt_requester = twt;
3248 		return BSS_CHANGED_TWT;
3249 	}
3250 	return 0;
3251 }
3252 
3253 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
3254 				    struct cfg80211_bss *cbss,
3255 				    struct ieee80211_mgmt *mgmt, size_t len,
3256 				    struct ieee802_11_elems *elems)
3257 {
3258 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3259 	struct ieee80211_local *local = sdata->local;
3260 	struct ieee80211_supported_band *sband;
3261 	struct sta_info *sta;
3262 	u16 capab_info, aid;
3263 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3264 	const struct cfg80211_bss_ies *bss_ies = NULL;
3265 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3266 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
3267 	u32 changed = 0;
3268 	int err;
3269 	bool ret;
3270 
3271 	/* AssocResp and ReassocResp have identical structure */
3272 
3273 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3274 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3275 
3276 	/*
3277 	 * The 5 MSB of the AID field are reserved
3278 	 * (802.11-2016 9.4.1.8 AID field)
3279 	 */
3280 	aid &= 0x7ff;
3281 
3282 	ifmgd->broken_ap = false;
3283 
3284 	if (aid == 0 || aid > IEEE80211_MAX_AID) {
3285 		sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
3286 			   aid);
3287 		aid = 0;
3288 		ifmgd->broken_ap = true;
3289 	}
3290 
3291 	if (!elems->supp_rates) {
3292 		sdata_info(sdata, "no SuppRates element in AssocResp\n");
3293 		return false;
3294 	}
3295 
3296 	sdata->vif.bss_conf.aid = aid;
3297 	ifmgd->tdls_chan_switch_prohibited =
3298 		elems->ext_capab && elems->ext_capab_len >= 5 &&
3299 		(elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
3300 
3301 	/*
3302 	 * Some APs are erroneously not including some information in their
3303 	 * (re)association response frames. Try to recover by using the data
3304 	 * from the beacon or probe response. This seems to afflict mobile
3305 	 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
3306 	 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
3307 	 */
3308 	if (!is_6ghz &&
3309 	    ((assoc_data->wmm && !elems->wmm_param) ||
3310 	     (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3311 	      (!elems->ht_cap_elem || !elems->ht_operation)) ||
3312 	     (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3313 	      (!elems->vht_cap_elem || !elems->vht_operation)))) {
3314 		const struct cfg80211_bss_ies *ies;
3315 		struct ieee802_11_elems bss_elems;
3316 
3317 		rcu_read_lock();
3318 		ies = rcu_dereference(cbss->ies);
3319 		if (ies)
3320 			bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
3321 					  GFP_ATOMIC);
3322 		rcu_read_unlock();
3323 		if (!bss_ies)
3324 			return false;
3325 
3326 		ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
3327 				       false, &bss_elems,
3328 				       mgmt->bssid,
3329 				       assoc_data->bss->bssid);
3330 		if (assoc_data->wmm &&
3331 		    !elems->wmm_param && bss_elems.wmm_param) {
3332 			elems->wmm_param = bss_elems.wmm_param;
3333 			sdata_info(sdata,
3334 				   "AP bug: WMM param missing from AssocResp\n");
3335 		}
3336 
3337 		/*
3338 		 * Also check if we requested HT/VHT, otherwise the AP doesn't
3339 		 * have to include the IEs in the (re)association response.
3340 		 */
3341 		if (!elems->ht_cap_elem && bss_elems.ht_cap_elem &&
3342 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3343 			elems->ht_cap_elem = bss_elems.ht_cap_elem;
3344 			sdata_info(sdata,
3345 				   "AP bug: HT capability missing from AssocResp\n");
3346 		}
3347 		if (!elems->ht_operation && bss_elems.ht_operation &&
3348 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3349 			elems->ht_operation = bss_elems.ht_operation;
3350 			sdata_info(sdata,
3351 				   "AP bug: HT operation missing from AssocResp\n");
3352 		}
3353 		if (!elems->vht_cap_elem && bss_elems.vht_cap_elem &&
3354 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3355 			elems->vht_cap_elem = bss_elems.vht_cap_elem;
3356 			sdata_info(sdata,
3357 				   "AP bug: VHT capa missing from AssocResp\n");
3358 		}
3359 		if (!elems->vht_operation && bss_elems.vht_operation &&
3360 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3361 			elems->vht_operation = bss_elems.vht_operation;
3362 			sdata_info(sdata,
3363 				   "AP bug: VHT operation missing from AssocResp\n");
3364 		}
3365 	}
3366 
3367 	/*
3368 	 * We previously checked these in the beacon/probe response, so
3369 	 * they should be present here. This is just a safety net.
3370 	 */
3371 	if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3372 	    (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
3373 		sdata_info(sdata,
3374 			   "HT AP is missing WMM params or HT capability/operation\n");
3375 		ret = false;
3376 		goto out;
3377 	}
3378 
3379 	if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3380 	    (!elems->vht_cap_elem || !elems->vht_operation)) {
3381 		sdata_info(sdata,
3382 			   "VHT AP is missing VHT capability/operation\n");
3383 		ret = false;
3384 		goto out;
3385 	}
3386 
3387 	if (is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3388 	    !elems->he_6ghz_capa) {
3389 		sdata_info(sdata,
3390 			   "HE 6 GHz AP is missing HE 6 GHz band capability\n");
3391 		ret = false;
3392 		goto out;
3393 	}
3394 
3395 	mutex_lock(&sdata->local->sta_mtx);
3396 	/*
3397 	 * station info was already allocated and inserted before
3398 	 * the association and should be available to us
3399 	 */
3400 	sta = sta_info_get(sdata, cbss->bssid);
3401 	if (WARN_ON(!sta)) {
3402 		mutex_unlock(&sdata->local->sta_mtx);
3403 		ret = false;
3404 		goto out;
3405 	}
3406 
3407 	sband = ieee80211_get_sband(sdata);
3408 	if (!sband) {
3409 		mutex_unlock(&sdata->local->sta_mtx);
3410 		ret = false;
3411 		goto out;
3412 	}
3413 
3414 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3415 	    (!elems->he_cap || !elems->he_operation)) {
3416 		mutex_unlock(&sdata->local->sta_mtx);
3417 		sdata_info(sdata,
3418 			   "HE AP is missing HE capability/operation\n");
3419 		ret = false;
3420 		goto out;
3421 	}
3422 
3423 	/* Set up internal HT/VHT capabilities */
3424 	if (elems->ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3425 		ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3426 						  elems->ht_cap_elem, sta);
3427 
3428 	if (elems->vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3429 		ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3430 						    elems->vht_cap_elem, sta);
3431 
3432 	if (elems->he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3433 	    elems->he_cap) {
3434 		ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
3435 						  elems->he_cap,
3436 						  elems->he_cap_len,
3437 						  elems->he_6ghz_capa,
3438 						  sta);
3439 
3440 		bss_conf->he_support = sta->sta.he_cap.has_he;
3441 		if (elems->rsnx && elems->rsnx_len &&
3442 		    (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
3443 		    wiphy_ext_feature_isset(local->hw.wiphy,
3444 					    NL80211_EXT_FEATURE_PROTECTED_TWT))
3445 			bss_conf->twt_protected = true;
3446 		else
3447 			bss_conf->twt_protected = false;
3448 
3449 		changed |= ieee80211_recalc_twt_req(sdata, sta, elems);
3450 	} else {
3451 		bss_conf->he_support = false;
3452 		bss_conf->twt_requester = false;
3453 		bss_conf->twt_protected = false;
3454 	}
3455 
3456 	if (bss_conf->he_support) {
3457 		bss_conf->he_bss_color.color =
3458 			le32_get_bits(elems->he_operation->he_oper_params,
3459 				      IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
3460 		bss_conf->he_bss_color.partial =
3461 			le32_get_bits(elems->he_operation->he_oper_params,
3462 				      IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR);
3463 		bss_conf->he_bss_color.disabled =
3464 			le32_get_bits(elems->he_operation->he_oper_params,
3465 				      IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
3466 		changed |= BSS_CHANGED_HE_BSS_COLOR;
3467 
3468 		bss_conf->htc_trig_based_pkt_ext =
3469 			le32_get_bits(elems->he_operation->he_oper_params,
3470 			      IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
3471 		bss_conf->frame_time_rts_th =
3472 			le32_get_bits(elems->he_operation->he_oper_params,
3473 			      IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
3474 
3475 		bss_conf->multi_sta_back_32bit =
3476 			sta->sta.he_cap.he_cap_elem.mac_cap_info[2] &
3477 			IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP;
3478 
3479 		bss_conf->ack_enabled =
3480 			sta->sta.he_cap.he_cap_elem.mac_cap_info[2] &
3481 			IEEE80211_HE_MAC_CAP2_ACK_EN;
3482 
3483 		bss_conf->uora_exists = !!elems->uora_element;
3484 		if (elems->uora_element)
3485 			bss_conf->uora_ocw_range = elems->uora_element[0];
3486 
3487 		ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation);
3488 		ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr);
3489 		/* TODO: OPEN: what happens if BSS color disable is set? */
3490 	}
3491 
3492 	if (cbss->transmitted_bss) {
3493 		bss_conf->nontransmitted = true;
3494 		ether_addr_copy(bss_conf->transmitter_bssid,
3495 				cbss->transmitted_bss->bssid);
3496 		bss_conf->bssid_indicator = cbss->max_bssid_indicator;
3497 		bss_conf->bssid_index = cbss->bssid_index;
3498 	}
3499 
3500 	/*
3501 	 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3502 	 * in their association response, so ignore that data for our own
3503 	 * configuration. If it changed since the last beacon, we'll get the
3504 	 * next beacon and update then.
3505 	 */
3506 
3507 	/*
3508 	 * If an operating mode notification IE is present, override the
3509 	 * NSS calculation (that would be done in rate_control_rate_init())
3510 	 * and use the # of streams from that element.
3511 	 */
3512 	if (elems->opmode_notif &&
3513 	    !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3514 		u8 nss;
3515 
3516 		nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3517 		nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3518 		nss += 1;
3519 		sta->sta.rx_nss = nss;
3520 	}
3521 
3522 	rate_control_rate_init(sta);
3523 
3524 	if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3525 		set_sta_flag(sta, WLAN_STA_MFP);
3526 		sta->sta.mfp = true;
3527 	} else {
3528 		sta->sta.mfp = false;
3529 	}
3530 
3531 	sta->sta.wme = elems->wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3532 
3533 	err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3534 	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3535 		err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3536 	if (err) {
3537 		sdata_info(sdata,
3538 			   "failed to move station %pM to desired state\n",
3539 			   sta->sta.addr);
3540 		WARN_ON(__sta_info_destroy(sta));
3541 		mutex_unlock(&sdata->local->sta_mtx);
3542 		ret = false;
3543 		goto out;
3544 	}
3545 
3546 	mutex_unlock(&sdata->local->sta_mtx);
3547 
3548 	/*
3549 	 * Always handle WMM once after association regardless
3550 	 * of the first value the AP uses. Setting -1 here has
3551 	 * that effect because the AP values is an unsigned
3552 	 * 4-bit value.
3553 	 */
3554 	ifmgd->wmm_last_param_set = -1;
3555 	ifmgd->mu_edca_last_param_set = -1;
3556 
3557 	if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3558 		ieee80211_set_wmm_default(sdata, false, false);
3559 	} else if (!ieee80211_sta_wmm_params(local, sdata, elems->wmm_param,
3560 					     elems->wmm_param_len,
3561 					     elems->mu_edca_param_set)) {
3562 		/* still enable QoS since we might have HT/VHT */
3563 		ieee80211_set_wmm_default(sdata, false, true);
3564 		/* set the disable-WMM flag in this case to disable
3565 		 * tracking WMM parameter changes in the beacon if
3566 		 * the parameters weren't actually valid. Doing so
3567 		 * avoids changing parameters very strangely when
3568 		 * the AP is going back and forth between valid and
3569 		 * invalid parameters.
3570 		 */
3571 		ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3572 	}
3573 	changed |= BSS_CHANGED_QOS;
3574 
3575 	if (elems->max_idle_period_ie) {
3576 		bss_conf->max_idle_period =
3577 			le16_to_cpu(elems->max_idle_period_ie->max_idle_period);
3578 		bss_conf->protected_keep_alive =
3579 			!!(elems->max_idle_period_ie->idle_options &
3580 			   WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
3581 		changed |= BSS_CHANGED_KEEP_ALIVE;
3582 	} else {
3583 		bss_conf->max_idle_period = 0;
3584 		bss_conf->protected_keep_alive = false;
3585 	}
3586 
3587 	/* set assoc capability (AID was already set earlier),
3588 	 * ieee80211_set_associated() will tell the driver */
3589 	bss_conf->assoc_capability = capab_info;
3590 	ieee80211_set_associated(sdata, cbss, changed);
3591 
3592 	/*
3593 	 * If we're using 4-addr mode, let the AP know that we're
3594 	 * doing so, so that it can create the STA VLAN on its side
3595 	 */
3596 	if (ifmgd->use_4addr)
3597 		ieee80211_send_4addr_nullfunc(local, sdata);
3598 
3599 	/*
3600 	 * Start timer to probe the connection to the AP now.
3601 	 * Also start the timer that will detect beacon loss.
3602 	 */
3603 	ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3604 	ieee80211_sta_reset_beacon_monitor(sdata);
3605 
3606 	ret = true;
3607  out:
3608 	kfree(bss_ies);
3609 	return ret;
3610 }
3611 
3612 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3613 					 struct ieee80211_mgmt *mgmt,
3614 					 size_t len)
3615 {
3616 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3617 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3618 	u16 capab_info, status_code, aid;
3619 	struct ieee802_11_elems elems;
3620 	int ac, uapsd_queues = -1;
3621 	u8 *pos;
3622 	bool reassoc;
3623 	struct cfg80211_bss *bss;
3624 	struct ieee80211_event event = {
3625 		.type = MLME_EVENT,
3626 		.u.mlme.data = ASSOC_EVENT,
3627 	};
3628 
3629 	sdata_assert_lock(sdata);
3630 
3631 	if (!assoc_data)
3632 		return;
3633 	if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3634 		return;
3635 
3636 	/*
3637 	 * AssocResp and ReassocResp have identical structure, so process both
3638 	 * of them in this function.
3639 	 */
3640 
3641 	if (len < 24 + 6)
3642 		return;
3643 
3644 	reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
3645 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3646 	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3647 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3648 
3649 	sdata_info(sdata,
3650 		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3651 		   reassoc ? "Rea" : "A", mgmt->sa,
3652 		   capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3653 
3654 	if (assoc_data->fils_kek_len &&
3655 	    fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
3656 		return;
3657 
3658 	pos = mgmt->u.assoc_resp.variable;
3659 	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
3660 			       mgmt->bssid, assoc_data->bss->bssid);
3661 
3662 	if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3663 	    elems.timeout_int &&
3664 	    elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3665 		u32 tu, ms;
3666 		tu = le32_to_cpu(elems.timeout_int->value);
3667 		ms = tu * 1024 / 1000;
3668 		sdata_info(sdata,
3669 			   "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3670 			   mgmt->sa, tu, ms);
3671 		assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3672 		assoc_data->timeout_started = true;
3673 		if (ms > IEEE80211_ASSOC_TIMEOUT)
3674 			run_again(sdata, assoc_data->timeout);
3675 		return;
3676 	}
3677 
3678 	bss = assoc_data->bss;
3679 
3680 	if (status_code != WLAN_STATUS_SUCCESS) {
3681 		sdata_info(sdata, "%pM denied association (code=%d)\n",
3682 			   mgmt->sa, status_code);
3683 		ieee80211_destroy_assoc_data(sdata, false, false);
3684 		event.u.mlme.status = MLME_DENIED;
3685 		event.u.mlme.reason = status_code;
3686 		drv_event_callback(sdata->local, sdata, &event);
3687 	} else {
3688 		if (!ieee80211_assoc_success(sdata, bss, mgmt, len, &elems)) {
3689 			/* oops -- internal error -- send timeout for now */
3690 			ieee80211_destroy_assoc_data(sdata, false, false);
3691 			cfg80211_assoc_timeout(sdata->dev, bss);
3692 			return;
3693 		}
3694 		event.u.mlme.status = MLME_SUCCESS;
3695 		drv_event_callback(sdata->local, sdata, &event);
3696 		sdata_info(sdata, "associated\n");
3697 
3698 		/*
3699 		 * destroy assoc_data afterwards, as otherwise an idle
3700 		 * recalc after assoc_data is NULL but before associated
3701 		 * is set can cause the interface to go idle
3702 		 */
3703 		ieee80211_destroy_assoc_data(sdata, true, false);
3704 
3705 		/* get uapsd queues configuration */
3706 		uapsd_queues = 0;
3707 		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3708 			if (sdata->tx_conf[ac].uapsd)
3709 				uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
3710 	}
3711 
3712 	cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues,
3713 			       ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len);
3714 }
3715 
3716 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3717 				  struct ieee80211_mgmt *mgmt, size_t len,
3718 				  struct ieee80211_rx_status *rx_status)
3719 {
3720 	struct ieee80211_local *local = sdata->local;
3721 	struct ieee80211_bss *bss;
3722 	struct ieee80211_channel *channel;
3723 
3724 	sdata_assert_lock(sdata);
3725 
3726 	channel = ieee80211_get_channel_khz(local->hw.wiphy,
3727 					ieee80211_rx_status_to_khz(rx_status));
3728 	if (!channel)
3729 		return;
3730 
3731 	bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel);
3732 	if (bss) {
3733 		sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3734 		ieee80211_rx_bss_put(local, bss);
3735 	}
3736 }
3737 
3738 
3739 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3740 					 struct sk_buff *skb)
3741 {
3742 	struct ieee80211_mgmt *mgmt = (void *)skb->data;
3743 	struct ieee80211_if_managed *ifmgd;
3744 	struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3745 	struct ieee80211_channel *channel;
3746 	size_t baselen, len = skb->len;
3747 
3748 	ifmgd = &sdata->u.mgd;
3749 
3750 	sdata_assert_lock(sdata);
3751 
3752 	/*
3753 	 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2:
3754 	 * "If a 6 GHz AP receives a Probe Request frame  and responds with
3755 	 * a Probe Response frame [..], the Address 1 field of the Probe
3756 	 * Response frame shall be set to the broadcast address [..]"
3757 	 * So, on 6GHz band we should also accept broadcast responses.
3758 	 */
3759 	channel = ieee80211_get_channel(sdata->local->hw.wiphy,
3760 					rx_status->freq);
3761 	if (!channel)
3762 		return;
3763 
3764 	if (!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
3765 	    (channel->band != NL80211_BAND_6GHZ ||
3766 	     !is_broadcast_ether_addr(mgmt->da)))
3767 		return; /* ignore ProbeResp to foreign address */
3768 
3769 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3770 	if (baselen > len)
3771 		return;
3772 
3773 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
3774 
3775 	if (ifmgd->associated &&
3776 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3777 		ieee80211_reset_ap_probe(sdata);
3778 }
3779 
3780 /*
3781  * This is the canonical list of information elements we care about,
3782  * the filter code also gives us all changes to the Microsoft OUI
3783  * (00:50:F2) vendor IE which is used for WMM which we need to track,
3784  * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3785  * changes to requested client power.
3786  *
3787  * We implement beacon filtering in software since that means we can
3788  * avoid processing the frame here and in cfg80211, and userspace
3789  * will not be able to tell whether the hardware supports it or not.
3790  *
3791  * XXX: This list needs to be dynamic -- userspace needs to be able to
3792  *	add items it requires. It also needs to be able to tell us to
3793  *	look out for other vendor IEs.
3794  */
3795 static const u64 care_about_ies =
3796 	(1ULL << WLAN_EID_COUNTRY) |
3797 	(1ULL << WLAN_EID_ERP_INFO) |
3798 	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
3799 	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
3800 	(1ULL << WLAN_EID_HT_CAPABILITY) |
3801 	(1ULL << WLAN_EID_HT_OPERATION) |
3802 	(1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3803 
3804 static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata,
3805 					struct ieee80211_if_managed *ifmgd,
3806 					struct ieee80211_bss_conf *bss_conf,
3807 					struct ieee80211_local *local,
3808 					struct ieee80211_rx_status *rx_status)
3809 {
3810 	/* Track average RSSI from the Beacon frames of the current AP */
3811 
3812 	if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3813 		ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3814 		ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3815 		ifmgd->last_cqm_event_signal = 0;
3816 		ifmgd->count_beacon_signal = 1;
3817 		ifmgd->last_ave_beacon_signal = 0;
3818 	} else {
3819 		ifmgd->count_beacon_signal++;
3820 	}
3821 
3822 	ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3823 
3824 	if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3825 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3826 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3827 		int last_sig = ifmgd->last_ave_beacon_signal;
3828 		struct ieee80211_event event = {
3829 			.type = RSSI_EVENT,
3830 		};
3831 
3832 		/*
3833 		 * if signal crosses either of the boundaries, invoke callback
3834 		 * with appropriate parameters
3835 		 */
3836 		if (sig > ifmgd->rssi_max_thold &&
3837 		    (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3838 			ifmgd->last_ave_beacon_signal = sig;
3839 			event.u.rssi.data = RSSI_EVENT_HIGH;
3840 			drv_event_callback(local, sdata, &event);
3841 		} else if (sig < ifmgd->rssi_min_thold &&
3842 			   (last_sig >= ifmgd->rssi_max_thold ||
3843 			   last_sig == 0)) {
3844 			ifmgd->last_ave_beacon_signal = sig;
3845 			event.u.rssi.data = RSSI_EVENT_LOW;
3846 			drv_event_callback(local, sdata, &event);
3847 		}
3848 	}
3849 
3850 	if (bss_conf->cqm_rssi_thold &&
3851 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3852 	    !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3853 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3854 		int last_event = ifmgd->last_cqm_event_signal;
3855 		int thold = bss_conf->cqm_rssi_thold;
3856 		int hyst = bss_conf->cqm_rssi_hyst;
3857 
3858 		if (sig < thold &&
3859 		    (last_event == 0 || sig < last_event - hyst)) {
3860 			ifmgd->last_cqm_event_signal = sig;
3861 			ieee80211_cqm_rssi_notify(
3862 				&sdata->vif,
3863 				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3864 				sig, GFP_KERNEL);
3865 		} else if (sig > thold &&
3866 			   (last_event == 0 || sig > last_event + hyst)) {
3867 			ifmgd->last_cqm_event_signal = sig;
3868 			ieee80211_cqm_rssi_notify(
3869 				&sdata->vif,
3870 				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3871 				sig, GFP_KERNEL);
3872 		}
3873 	}
3874 
3875 	if (bss_conf->cqm_rssi_low &&
3876 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3877 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3878 		int last_event = ifmgd->last_cqm_event_signal;
3879 		int low = bss_conf->cqm_rssi_low;
3880 		int high = bss_conf->cqm_rssi_high;
3881 
3882 		if (sig < low &&
3883 		    (last_event == 0 || last_event >= low)) {
3884 			ifmgd->last_cqm_event_signal = sig;
3885 			ieee80211_cqm_rssi_notify(
3886 				&sdata->vif,
3887 				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3888 				sig, GFP_KERNEL);
3889 		} else if (sig > high &&
3890 			   (last_event == 0 || last_event <= high)) {
3891 			ifmgd->last_cqm_event_signal = sig;
3892 			ieee80211_cqm_rssi_notify(
3893 				&sdata->vif,
3894 				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3895 				sig, GFP_KERNEL);
3896 		}
3897 	}
3898 }
3899 
3900 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
3901 				    struct cfg80211_bss *bss)
3902 {
3903 	if (ether_addr_equal(tx_bssid, bss->bssid))
3904 		return true;
3905 	if (!bss->transmitted_bss)
3906 		return false;
3907 	return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
3908 }
3909 
3910 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3911 				     struct ieee80211_mgmt *mgmt, size_t len,
3912 				     struct ieee80211_rx_status *rx_status)
3913 {
3914 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3915 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3916 	size_t baselen;
3917 	struct ieee802_11_elems elems;
3918 	struct ieee80211_local *local = sdata->local;
3919 	struct ieee80211_chanctx_conf *chanctx_conf;
3920 	struct ieee80211_channel *chan;
3921 	struct sta_info *sta;
3922 	u32 changed = 0;
3923 	bool erp_valid;
3924 	u8 erp_value = 0;
3925 	u32 ncrc;
3926 	u8 *bssid;
3927 	u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3928 
3929 	sdata_assert_lock(sdata);
3930 
3931 	/* Process beacon from the current BSS */
3932 	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3933 	if (baselen > len)
3934 		return;
3935 
3936 	rcu_read_lock();
3937 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3938 	if (!chanctx_conf) {
3939 		rcu_read_unlock();
3940 		return;
3941 	}
3942 
3943 	if (ieee80211_rx_status_to_khz(rx_status) !=
3944 	    ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
3945 		rcu_read_unlock();
3946 		return;
3947 	}
3948 	chan = chanctx_conf->def.chan;
3949 	rcu_read_unlock();
3950 
3951 	if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3952 	    ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) {
3953 		ieee802_11_parse_elems(mgmt->u.beacon.variable,
3954 				       len - baselen, false, &elems,
3955 				       mgmt->bssid,
3956 				       ifmgd->assoc_data->bss->bssid);
3957 
3958 		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
3959 
3960 		if (elems.dtim_period)
3961 			ifmgd->dtim_period = elems.dtim_period;
3962 		ifmgd->have_beacon = true;
3963 		ifmgd->assoc_data->need_beacon = false;
3964 		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3965 			sdata->vif.bss_conf.sync_tsf =
3966 				le64_to_cpu(mgmt->u.beacon.timestamp);
3967 			sdata->vif.bss_conf.sync_device_ts =
3968 				rx_status->device_timestamp;
3969 			sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
3970 		}
3971 
3972 		if (elems.mbssid_config_ie)
3973 			bss_conf->profile_periodicity =
3974 				elems.mbssid_config_ie->profile_periodicity;
3975 
3976 		if (elems.ext_capab_len >= 11 &&
3977 		    (elems.ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
3978 			bss_conf->ema_ap = true;
3979 
3980 		/* continue assoc process */
3981 		ifmgd->assoc_data->timeout = jiffies;
3982 		ifmgd->assoc_data->timeout_started = true;
3983 		run_again(sdata, ifmgd->assoc_data->timeout);
3984 		return;
3985 	}
3986 
3987 	if (!ifmgd->associated ||
3988 	    !ieee80211_rx_our_beacon(mgmt->bssid,  ifmgd->associated))
3989 		return;
3990 	bssid = ifmgd->associated->bssid;
3991 
3992 	if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
3993 		ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf,
3994 					    local, rx_status);
3995 
3996 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3997 		mlme_dbg_ratelimited(sdata,
3998 				     "cancelling AP probe due to a received beacon\n");
3999 		ieee80211_reset_ap_probe(sdata);
4000 	}
4001 
4002 	/*
4003 	 * Push the beacon loss detection into the future since
4004 	 * we are processing a beacon from the AP just now.
4005 	 */
4006 	ieee80211_sta_reset_beacon_monitor(sdata);
4007 
4008 	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
4009 	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
4010 					  len - baselen, false, &elems,
4011 					  care_about_ies, ncrc,
4012 					  mgmt->bssid, bssid);
4013 
4014 	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
4015 	    ieee80211_check_tim(elems.tim, elems.tim_len, bss_conf->aid)) {
4016 		if (local->hw.conf.dynamic_ps_timeout > 0) {
4017 			if (local->hw.conf.flags & IEEE80211_CONF_PS) {
4018 				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
4019 				ieee80211_hw_config(local,
4020 						    IEEE80211_CONF_CHANGE_PS);
4021 			}
4022 			ieee80211_send_nullfunc(local, sdata, false);
4023 		} else if (!local->pspolling && sdata->u.mgd.powersave) {
4024 			local->pspolling = true;
4025 
4026 			/*
4027 			 * Here is assumed that the driver will be
4028 			 * able to send ps-poll frame and receive a
4029 			 * response even though power save mode is
4030 			 * enabled, but some drivers might require
4031 			 * to disable power save here. This needs
4032 			 * to be investigated.
4033 			 */
4034 			ieee80211_send_pspoll(local, sdata);
4035 		}
4036 	}
4037 
4038 	if (sdata->vif.p2p ||
4039 	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
4040 		struct ieee80211_p2p_noa_attr noa = {};
4041 		int ret;
4042 
4043 		ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
4044 					    len - baselen,
4045 					    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
4046 					    (u8 *) &noa, sizeof(noa));
4047 		if (ret >= 2) {
4048 			if (sdata->u.mgd.p2p_noa_index != noa.index) {
4049 				/* valid noa_attr and index changed */
4050 				sdata->u.mgd.p2p_noa_index = noa.index;
4051 				memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
4052 				changed |= BSS_CHANGED_P2P_PS;
4053 				/*
4054 				 * make sure we update all information, the CRC
4055 				 * mechanism doesn't look at P2P attributes.
4056 				 */
4057 				ifmgd->beacon_crc_valid = false;
4058 			}
4059 		} else if (sdata->u.mgd.p2p_noa_index != -1) {
4060 			/* noa_attr not found and we had valid noa_attr before */
4061 			sdata->u.mgd.p2p_noa_index = -1;
4062 			memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
4063 			changed |= BSS_CHANGED_P2P_PS;
4064 			ifmgd->beacon_crc_valid = false;
4065 		}
4066 	}
4067 
4068 	if (ifmgd->csa_waiting_bcn)
4069 		ieee80211_chswitch_post_beacon(sdata);
4070 
4071 	/*
4072 	 * Update beacon timing and dtim count on every beacon appearance. This
4073 	 * will allow the driver to use the most updated values. Do it before
4074 	 * comparing this one with last received beacon.
4075 	 * IMPORTANT: These parameters would possibly be out of sync by the time
4076 	 * the driver will use them. The synchronized view is currently
4077 	 * guaranteed only in certain callbacks.
4078 	 */
4079 	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4080 		sdata->vif.bss_conf.sync_tsf =
4081 			le64_to_cpu(mgmt->u.beacon.timestamp);
4082 		sdata->vif.bss_conf.sync_device_ts =
4083 			rx_status->device_timestamp;
4084 		sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
4085 	}
4086 
4087 	if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
4088 		return;
4089 	ifmgd->beacon_crc = ncrc;
4090 	ifmgd->beacon_crc_valid = true;
4091 
4092 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
4093 
4094 	ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
4095 					 rx_status->device_timestamp,
4096 					 &elems, true);
4097 
4098 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
4099 	    ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
4100 				     elems.wmm_param_len,
4101 				     elems.mu_edca_param_set))
4102 		changed |= BSS_CHANGED_QOS;
4103 
4104 	/*
4105 	 * If we haven't had a beacon before, tell the driver about the
4106 	 * DTIM period (and beacon timing if desired) now.
4107 	 */
4108 	if (!ifmgd->have_beacon) {
4109 		/* a few bogus AP send dtim_period = 0 or no TIM IE */
4110 		bss_conf->dtim_period = elems.dtim_period ?: 1;
4111 
4112 		changed |= BSS_CHANGED_BEACON_INFO;
4113 		ifmgd->have_beacon = true;
4114 
4115 		mutex_lock(&local->iflist_mtx);
4116 		ieee80211_recalc_ps(local);
4117 		mutex_unlock(&local->iflist_mtx);
4118 
4119 		ieee80211_recalc_ps_vif(sdata);
4120 	}
4121 
4122 	if (elems.erp_info) {
4123 		erp_valid = true;
4124 		erp_value = elems.erp_info[0];
4125 	} else {
4126 		erp_valid = false;
4127 	}
4128 	changed |= ieee80211_handle_bss_capability(sdata,
4129 			le16_to_cpu(mgmt->u.beacon.capab_info),
4130 			erp_valid, erp_value);
4131 
4132 	mutex_lock(&local->sta_mtx);
4133 	sta = sta_info_get(sdata, bssid);
4134 
4135 	changed |= ieee80211_recalc_twt_req(sdata, sta, &elems);
4136 
4137 	if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem,
4138 				elems.vht_cap_elem, elems.ht_operation,
4139 				elems.vht_operation, elems.he_operation,
4140 				bssid, &changed)) {
4141 		mutex_unlock(&local->sta_mtx);
4142 		sdata_info(sdata,
4143 			   "failed to follow AP %pM bandwidth change, disconnect\n",
4144 			   bssid);
4145 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4146 				       WLAN_REASON_DEAUTH_LEAVING,
4147 				       true, deauth_buf);
4148 		ieee80211_report_disconnect(sdata, deauth_buf,
4149 					    sizeof(deauth_buf), true,
4150 					    WLAN_REASON_DEAUTH_LEAVING);
4151 		return;
4152 	}
4153 
4154 	if (sta && elems.opmode_notif)
4155 		ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
4156 					    rx_status->band);
4157 	mutex_unlock(&local->sta_mtx);
4158 
4159 	changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
4160 					       elems.country_elem,
4161 					       elems.country_elem_len,
4162 					       elems.pwr_constr_elem,
4163 					       elems.cisco_dtpc_elem);
4164 
4165 	ieee80211_bss_info_change_notify(sdata, changed);
4166 }
4167 
4168 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
4169 				  struct sk_buff *skb)
4170 {
4171 	struct ieee80211_rx_status *rx_status;
4172 	struct ieee80211_mgmt *mgmt;
4173 	u16 fc;
4174 	struct ieee802_11_elems elems;
4175 	int ies_len;
4176 
4177 	rx_status = (struct ieee80211_rx_status *) skb->cb;
4178 	mgmt = (struct ieee80211_mgmt *) skb->data;
4179 	fc = le16_to_cpu(mgmt->frame_control);
4180 
4181 	sdata_lock(sdata);
4182 
4183 	switch (fc & IEEE80211_FCTL_STYPE) {
4184 	case IEEE80211_STYPE_BEACON:
4185 		ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
4186 		break;
4187 	case IEEE80211_STYPE_PROBE_RESP:
4188 		ieee80211_rx_mgmt_probe_resp(sdata, skb);
4189 		break;
4190 	case IEEE80211_STYPE_AUTH:
4191 		ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
4192 		break;
4193 	case IEEE80211_STYPE_DEAUTH:
4194 		ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
4195 		break;
4196 	case IEEE80211_STYPE_DISASSOC:
4197 		ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
4198 		break;
4199 	case IEEE80211_STYPE_ASSOC_RESP:
4200 	case IEEE80211_STYPE_REASSOC_RESP:
4201 		ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
4202 		break;
4203 	case IEEE80211_STYPE_ACTION:
4204 		if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
4205 			ies_len = skb->len -
4206 				  offsetof(struct ieee80211_mgmt,
4207 					   u.action.u.chan_switch.variable);
4208 
4209 			if (ies_len < 0)
4210 				break;
4211 
4212 			/* CSA IE cannot be overridden, no need for BSSID */
4213 			ieee802_11_parse_elems(
4214 				mgmt->u.action.u.chan_switch.variable,
4215 				ies_len, true, &elems, mgmt->bssid, NULL);
4216 
4217 			if (elems.parse_error)
4218 				break;
4219 
4220 			ieee80211_sta_process_chanswitch(sdata,
4221 						 rx_status->mactime,
4222 						 rx_status->device_timestamp,
4223 						 &elems, false);
4224 		} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
4225 			ies_len = skb->len -
4226 				  offsetof(struct ieee80211_mgmt,
4227 					   u.action.u.ext_chan_switch.variable);
4228 
4229 			if (ies_len < 0)
4230 				break;
4231 
4232 			/*
4233 			 * extended CSA IE can't be overridden, no need for
4234 			 * BSSID
4235 			 */
4236 			ieee802_11_parse_elems(
4237 				mgmt->u.action.u.ext_chan_switch.variable,
4238 				ies_len, true, &elems, mgmt->bssid, NULL);
4239 
4240 			if (elems.parse_error)
4241 				break;
4242 
4243 			/* for the handling code pretend this was also an IE */
4244 			elems.ext_chansw_ie =
4245 				&mgmt->u.action.u.ext_chan_switch.data;
4246 
4247 			ieee80211_sta_process_chanswitch(sdata,
4248 						 rx_status->mactime,
4249 						 rx_status->device_timestamp,
4250 						 &elems, false);
4251 		}
4252 		break;
4253 	}
4254 	sdata_unlock(sdata);
4255 }
4256 
4257 static void ieee80211_sta_timer(struct timer_list *t)
4258 {
4259 	struct ieee80211_sub_if_data *sdata =
4260 		from_timer(sdata, t, u.mgd.timer);
4261 
4262 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
4263 }
4264 
4265 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
4266 					  u8 *bssid, u8 reason, bool tx)
4267 {
4268 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4269 
4270 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
4271 			       tx, frame_buf);
4272 
4273 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
4274 				    reason);
4275 }
4276 
4277 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
4278 {
4279 	struct ieee80211_local *local = sdata->local;
4280 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4281 	struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
4282 	u32 tx_flags = 0;
4283 	u16 trans = 1;
4284 	u16 status = 0;
4285 	u16 prepare_tx_duration = 0;
4286 
4287 	sdata_assert_lock(sdata);
4288 
4289 	if (WARN_ON_ONCE(!auth_data))
4290 		return -EINVAL;
4291 
4292 	auth_data->tries++;
4293 
4294 	if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
4295 		sdata_info(sdata, "authentication with %pM timed out\n",
4296 			   auth_data->bss->bssid);
4297 
4298 		/*
4299 		 * Most likely AP is not in the range so remove the
4300 		 * bss struct for that AP.
4301 		 */
4302 		cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
4303 
4304 		return -ETIMEDOUT;
4305 	}
4306 
4307 	if (auth_data->algorithm == WLAN_AUTH_SAE)
4308 		prepare_tx_duration =
4309 			jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
4310 
4311 	drv_mgd_prepare_tx(local, sdata, prepare_tx_duration);
4312 
4313 	sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
4314 		   auth_data->bss->bssid, auth_data->tries,
4315 		   IEEE80211_AUTH_MAX_TRIES);
4316 
4317 	auth_data->expected_transaction = 2;
4318 
4319 	if (auth_data->algorithm == WLAN_AUTH_SAE) {
4320 		trans = auth_data->sae_trans;
4321 		status = auth_data->sae_status;
4322 		auth_data->expected_transaction = trans;
4323 	}
4324 
4325 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4326 		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
4327 			   IEEE80211_TX_INTFL_MLME_CONN_TX;
4328 
4329 	ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
4330 			    auth_data->data, auth_data->data_len,
4331 			    auth_data->bss->bssid,
4332 			    auth_data->bss->bssid, NULL, 0, 0,
4333 			    tx_flags);
4334 
4335 	if (tx_flags == 0) {
4336 		if (auth_data->algorithm == WLAN_AUTH_SAE)
4337 			auth_data->timeout = jiffies +
4338 				IEEE80211_AUTH_TIMEOUT_SAE;
4339 		else
4340 			auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
4341 	} else {
4342 		auth_data->timeout =
4343 			round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
4344 	}
4345 
4346 	auth_data->timeout_started = true;
4347 	run_again(sdata, auth_data->timeout);
4348 
4349 	return 0;
4350 }
4351 
4352 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
4353 {
4354 	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
4355 	struct ieee80211_local *local = sdata->local;
4356 
4357 	sdata_assert_lock(sdata);
4358 
4359 	assoc_data->tries++;
4360 	if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
4361 		sdata_info(sdata, "association with %pM timed out\n",
4362 			   assoc_data->bss->bssid);
4363 
4364 		/*
4365 		 * Most likely AP is not in the range so remove the
4366 		 * bss struct for that AP.
4367 		 */
4368 		cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
4369 
4370 		return -ETIMEDOUT;
4371 	}
4372 
4373 	sdata_info(sdata, "associate with %pM (try %d/%d)\n",
4374 		   assoc_data->bss->bssid, assoc_data->tries,
4375 		   IEEE80211_ASSOC_MAX_TRIES);
4376 	ieee80211_send_assoc(sdata);
4377 
4378 	if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4379 		assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
4380 		assoc_data->timeout_started = true;
4381 		run_again(sdata, assoc_data->timeout);
4382 	} else {
4383 		assoc_data->timeout =
4384 			round_jiffies_up(jiffies +
4385 					 IEEE80211_ASSOC_TIMEOUT_LONG);
4386 		assoc_data->timeout_started = true;
4387 		run_again(sdata, assoc_data->timeout);
4388 	}
4389 
4390 	return 0;
4391 }
4392 
4393 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
4394 				  __le16 fc, bool acked)
4395 {
4396 	struct ieee80211_local *local = sdata->local;
4397 
4398 	sdata->u.mgd.status_fc = fc;
4399 	sdata->u.mgd.status_acked = acked;
4400 	sdata->u.mgd.status_received = true;
4401 
4402 	ieee80211_queue_work(&local->hw, &sdata->work);
4403 }
4404 
4405 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
4406 {
4407 	struct ieee80211_local *local = sdata->local;
4408 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4409 
4410 	sdata_lock(sdata);
4411 
4412 	if (ifmgd->status_received) {
4413 		__le16 fc = ifmgd->status_fc;
4414 		bool status_acked = ifmgd->status_acked;
4415 
4416 		ifmgd->status_received = false;
4417 		if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
4418 			if (status_acked) {
4419 				if (ifmgd->auth_data->algorithm ==
4420 				    WLAN_AUTH_SAE)
4421 					ifmgd->auth_data->timeout =
4422 						jiffies +
4423 						IEEE80211_AUTH_TIMEOUT_SAE;
4424 				else
4425 					ifmgd->auth_data->timeout =
4426 						jiffies +
4427 						IEEE80211_AUTH_TIMEOUT_SHORT;
4428 				run_again(sdata, ifmgd->auth_data->timeout);
4429 			} else {
4430 				ifmgd->auth_data->timeout = jiffies - 1;
4431 			}
4432 			ifmgd->auth_data->timeout_started = true;
4433 		} else if (ifmgd->assoc_data &&
4434 			   (ieee80211_is_assoc_req(fc) ||
4435 			    ieee80211_is_reassoc_req(fc))) {
4436 			if (status_acked) {
4437 				ifmgd->assoc_data->timeout =
4438 					jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
4439 				run_again(sdata, ifmgd->assoc_data->timeout);
4440 			} else {
4441 				ifmgd->assoc_data->timeout = jiffies - 1;
4442 			}
4443 			ifmgd->assoc_data->timeout_started = true;
4444 		}
4445 	}
4446 
4447 	if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
4448 	    time_after(jiffies, ifmgd->auth_data->timeout)) {
4449 		if (ifmgd->auth_data->done) {
4450 			/*
4451 			 * ok ... we waited for assoc but userspace didn't,
4452 			 * so let's just kill the auth data
4453 			 */
4454 			ieee80211_destroy_auth_data(sdata, false);
4455 		} else if (ieee80211_auth(sdata)) {
4456 			u8 bssid[ETH_ALEN];
4457 			struct ieee80211_event event = {
4458 				.type = MLME_EVENT,
4459 				.u.mlme.data = AUTH_EVENT,
4460 				.u.mlme.status = MLME_TIMEOUT,
4461 			};
4462 
4463 			memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
4464 
4465 			ieee80211_destroy_auth_data(sdata, false);
4466 
4467 			cfg80211_auth_timeout(sdata->dev, bssid);
4468 			drv_event_callback(sdata->local, sdata, &event);
4469 		}
4470 	} else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
4471 		run_again(sdata, ifmgd->auth_data->timeout);
4472 
4473 	if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
4474 	    time_after(jiffies, ifmgd->assoc_data->timeout)) {
4475 		if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
4476 		    ieee80211_do_assoc(sdata)) {
4477 			struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4478 			struct ieee80211_event event = {
4479 				.type = MLME_EVENT,
4480 				.u.mlme.data = ASSOC_EVENT,
4481 				.u.mlme.status = MLME_TIMEOUT,
4482 			};
4483 
4484 			ieee80211_destroy_assoc_data(sdata, false, false);
4485 			cfg80211_assoc_timeout(sdata->dev, bss);
4486 			drv_event_callback(sdata->local, sdata, &event);
4487 		}
4488 	} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
4489 		run_again(sdata, ifmgd->assoc_data->timeout);
4490 
4491 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
4492 	    ifmgd->associated) {
4493 		u8 bssid[ETH_ALEN];
4494 		int max_tries;
4495 
4496 		memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4497 
4498 		if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4499 			max_tries = max_nullfunc_tries;
4500 		else
4501 			max_tries = max_probe_tries;
4502 
4503 		/* ACK received for nullfunc probing frame */
4504 		if (!ifmgd->probe_send_count)
4505 			ieee80211_reset_ap_probe(sdata);
4506 		else if (ifmgd->nullfunc_failed) {
4507 			if (ifmgd->probe_send_count < max_tries) {
4508 				mlme_dbg(sdata,
4509 					 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
4510 					 bssid, ifmgd->probe_send_count,
4511 					 max_tries);
4512 				ieee80211_mgd_probe_ap_send(sdata);
4513 			} else {
4514 				mlme_dbg(sdata,
4515 					 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
4516 					 bssid);
4517 				ieee80211_sta_connection_lost(sdata, bssid,
4518 					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
4519 					false);
4520 			}
4521 		} else if (time_is_after_jiffies(ifmgd->probe_timeout))
4522 			run_again(sdata, ifmgd->probe_timeout);
4523 		else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4524 			mlme_dbg(sdata,
4525 				 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
4526 				 bssid, probe_wait_ms);
4527 			ieee80211_sta_connection_lost(sdata, bssid,
4528 				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4529 		} else if (ifmgd->probe_send_count < max_tries) {
4530 			mlme_dbg(sdata,
4531 				 "No probe response from AP %pM after %dms, try %d/%i\n",
4532 				 bssid, probe_wait_ms,
4533 				 ifmgd->probe_send_count, max_tries);
4534 			ieee80211_mgd_probe_ap_send(sdata);
4535 		} else {
4536 			/*
4537 			 * We actually lost the connection ... or did we?
4538 			 * Let's make sure!
4539 			 */
4540 			mlme_dbg(sdata,
4541 				 "No probe response from AP %pM after %dms, disconnecting.\n",
4542 				 bssid, probe_wait_ms);
4543 
4544 			ieee80211_sta_connection_lost(sdata, bssid,
4545 				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4546 		}
4547 	}
4548 
4549 	sdata_unlock(sdata);
4550 }
4551 
4552 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
4553 {
4554 	struct ieee80211_sub_if_data *sdata =
4555 		from_timer(sdata, t, u.mgd.bcn_mon_timer);
4556 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4557 
4558 	if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4559 		return;
4560 
4561 	sdata->u.mgd.connection_loss = false;
4562 	ieee80211_queue_work(&sdata->local->hw,
4563 			     &sdata->u.mgd.beacon_connection_loss_work);
4564 }
4565 
4566 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
4567 {
4568 	struct ieee80211_sub_if_data *sdata =
4569 		from_timer(sdata, t, u.mgd.conn_mon_timer);
4570 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4571 	struct ieee80211_local *local = sdata->local;
4572 
4573 	if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4574 		return;
4575 
4576 	ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
4577 }
4578 
4579 static void ieee80211_sta_monitor_work(struct work_struct *work)
4580 {
4581 	struct ieee80211_sub_if_data *sdata =
4582 		container_of(work, struct ieee80211_sub_if_data,
4583 			     u.mgd.monitor_work);
4584 
4585 	ieee80211_mgd_probe_ap(sdata, false);
4586 }
4587 
4588 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4589 {
4590 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4591 		__ieee80211_stop_poll(sdata);
4592 
4593 		/* let's probe the connection once */
4594 		if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4595 			ieee80211_queue_work(&sdata->local->hw,
4596 					     &sdata->u.mgd.monitor_work);
4597 	}
4598 }
4599 
4600 #ifdef CONFIG_PM
4601 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4602 {
4603 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4604 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4605 
4606 	sdata_lock(sdata);
4607 
4608 	if (ifmgd->auth_data || ifmgd->assoc_data) {
4609 		const u8 *bssid = ifmgd->auth_data ?
4610 				ifmgd->auth_data->bss->bssid :
4611 				ifmgd->assoc_data->bss->bssid;
4612 
4613 		/*
4614 		 * If we are trying to authenticate / associate while suspending,
4615 		 * cfg80211 won't know and won't actually abort those attempts,
4616 		 * thus we need to do that ourselves.
4617 		 */
4618 		ieee80211_send_deauth_disassoc(sdata, bssid, bssid,
4619 					       IEEE80211_STYPE_DEAUTH,
4620 					       WLAN_REASON_DEAUTH_LEAVING,
4621 					       false, frame_buf);
4622 		if (ifmgd->assoc_data)
4623 			ieee80211_destroy_assoc_data(sdata, false, true);
4624 		if (ifmgd->auth_data)
4625 			ieee80211_destroy_auth_data(sdata, false);
4626 		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4627 				      IEEE80211_DEAUTH_FRAME_LEN);
4628 	}
4629 
4630 	/* This is a bit of a hack - we should find a better and more generic
4631 	 * solution to this. Normally when suspending, cfg80211 will in fact
4632 	 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4633 	 * auth (not so important) or assoc (this is the problem) process.
4634 	 *
4635 	 * As a consequence, it can happen that we are in the process of both
4636 	 * associating and suspending, and receive an association response
4637 	 * after cfg80211 has checked if it needs to disconnect, but before
4638 	 * we actually set the flag to drop incoming frames. This will then
4639 	 * cause the workqueue flush to process the association response in
4640 	 * the suspend, resulting in a successful association just before it
4641 	 * tries to remove the interface from the driver, which now though
4642 	 * has a channel context assigned ... this results in issues.
4643 	 *
4644 	 * To work around this (for now) simply deauth here again if we're
4645 	 * now connected.
4646 	 */
4647 	if (ifmgd->associated && !sdata->local->wowlan) {
4648 		u8 bssid[ETH_ALEN];
4649 		struct cfg80211_deauth_request req = {
4650 			.reason_code = WLAN_REASON_DEAUTH_LEAVING,
4651 			.bssid = bssid,
4652 		};
4653 
4654 		memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4655 		ieee80211_mgd_deauth(sdata, &req);
4656 	}
4657 
4658 	sdata_unlock(sdata);
4659 }
4660 
4661 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4662 {
4663 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4664 
4665 	sdata_lock(sdata);
4666 	if (!ifmgd->associated) {
4667 		sdata_unlock(sdata);
4668 		return;
4669 	}
4670 
4671 	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4672 		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4673 		mlme_dbg(sdata, "driver requested disconnect after resume\n");
4674 		ieee80211_sta_connection_lost(sdata,
4675 					      ifmgd->associated->bssid,
4676 					      WLAN_REASON_UNSPECIFIED,
4677 					      true);
4678 		sdata_unlock(sdata);
4679 		return;
4680 	}
4681 	sdata_unlock(sdata);
4682 }
4683 #endif
4684 
4685 /* interface setup */
4686 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4687 {
4688 	struct ieee80211_if_managed *ifmgd;
4689 
4690 	ifmgd = &sdata->u.mgd;
4691 	INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4692 	INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4693 	INIT_WORK(&ifmgd->beacon_connection_loss_work,
4694 		  ieee80211_beacon_connection_loss_work);
4695 	INIT_WORK(&ifmgd->csa_connection_drop_work,
4696 		  ieee80211_csa_connection_drop_work);
4697 	INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4698 	INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4699 			  ieee80211_tdls_peer_del_work);
4700 	timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
4701 	timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
4702 	timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
4703 	timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0);
4704 	INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4705 			  ieee80211_sta_handle_tspec_ac_params_wk);
4706 
4707 	ifmgd->flags = 0;
4708 	ifmgd->powersave = sdata->wdev.ps;
4709 	ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4710 	ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4711 	ifmgd->p2p_noa_index = -1;
4712 
4713 	if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4714 		ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4715 	else
4716 		ifmgd->req_smps = IEEE80211_SMPS_OFF;
4717 
4718 	/* Setup TDLS data */
4719 	spin_lock_init(&ifmgd->teardown_lock);
4720 	ifmgd->teardown_skb = NULL;
4721 	ifmgd->orig_teardown_skb = NULL;
4722 }
4723 
4724 /* scan finished notification */
4725 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4726 {
4727 	struct ieee80211_sub_if_data *sdata;
4728 
4729 	/* Restart STA timers */
4730 	rcu_read_lock();
4731 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4732 		if (ieee80211_sdata_running(sdata))
4733 			ieee80211_restart_sta_timer(sdata);
4734 	}
4735 	rcu_read_unlock();
4736 }
4737 
4738 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4739 				     struct cfg80211_bss *cbss)
4740 {
4741 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4742 	const u8 *ht_cap_ie, *vht_cap_ie;
4743 	const struct ieee80211_ht_cap *ht_cap;
4744 	const struct ieee80211_vht_cap *vht_cap;
4745 	u8 chains = 1;
4746 
4747 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4748 		return chains;
4749 
4750 	ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4751 	if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4752 		ht_cap = (void *)(ht_cap_ie + 2);
4753 		chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4754 		/*
4755 		 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4756 		 *	 "Tx Unequal Modulation Supported" fields.
4757 		 */
4758 	}
4759 
4760 	if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4761 		return chains;
4762 
4763 	vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4764 	if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4765 		u8 nss;
4766 		u16 tx_mcs_map;
4767 
4768 		vht_cap = (void *)(vht_cap_ie + 2);
4769 		tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4770 		for (nss = 8; nss > 0; nss--) {
4771 			if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4772 					IEEE80211_VHT_MCS_NOT_SUPPORTED)
4773 				break;
4774 		}
4775 		/* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4776 		chains = max(chains, nss);
4777 	}
4778 
4779 	return chains;
4780 }
4781 
4782 static bool
4783 ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband,
4784 				    const struct ieee80211_he_operation *he_op)
4785 {
4786 	const struct ieee80211_sta_he_cap *sta_he_cap =
4787 		ieee80211_get_he_sta_cap(sband);
4788 	u16 ap_min_req_set;
4789 	int i;
4790 
4791 	if (!sta_he_cap || !he_op)
4792 		return false;
4793 
4794 	ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4795 
4796 	/* Need to go over for 80MHz, 160MHz and for 80+80 */
4797 	for (i = 0; i < 3; i++) {
4798 		const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
4799 			&sta_he_cap->he_mcs_nss_supp;
4800 		u16 sta_mcs_map_rx =
4801 			le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
4802 		u16 sta_mcs_map_tx =
4803 			le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
4804 		u8 nss;
4805 		bool verified = true;
4806 
4807 		/*
4808 		 * For each band there is a maximum of 8 spatial streams
4809 		 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
4810 		 * of 2 bits per NSS (1-8), with the values defined in enum
4811 		 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
4812 		 * capabilities aren't less than the AP's minimum requirements
4813 		 * for this HE BSS per SS.
4814 		 * It is enough to find one such band that meets the reqs.
4815 		 */
4816 		for (nss = 8; nss > 0; nss--) {
4817 			u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
4818 			u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
4819 			u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4820 
4821 			if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4822 				continue;
4823 
4824 			/*
4825 			 * Make sure the HE AP doesn't require MCSs that aren't
4826 			 * supported by the client
4827 			 */
4828 			if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4829 			    sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4830 			    (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
4831 				verified = false;
4832 				break;
4833 			}
4834 		}
4835 
4836 		if (verified)
4837 			return true;
4838 	}
4839 
4840 	/* If here, STA doesn't meet AP's HE min requirements */
4841 	return false;
4842 }
4843 
4844 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4845 				  struct cfg80211_bss *cbss)
4846 {
4847 	struct ieee80211_local *local = sdata->local;
4848 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4849 	const struct ieee80211_ht_cap *ht_cap = NULL;
4850 	const struct ieee80211_ht_operation *ht_oper = NULL;
4851 	const struct ieee80211_vht_operation *vht_oper = NULL;
4852 	const struct ieee80211_he_operation *he_oper = NULL;
4853 	struct ieee80211_supported_band *sband;
4854 	struct cfg80211_chan_def chandef;
4855 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
4856 	struct ieee80211_bss *bss = (void *)cbss->priv;
4857 	int ret;
4858 	u32 i;
4859 	bool have_80mhz;
4860 
4861 	sband = local->hw.wiphy->bands[cbss->channel->band];
4862 
4863 	ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4864 			  IEEE80211_STA_DISABLE_80P80MHZ |
4865 			  IEEE80211_STA_DISABLE_160MHZ);
4866 
4867 	/* disable HT/VHT/HE if we don't support them */
4868 	if (!sband->ht_cap.ht_supported && !is_6ghz) {
4869 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4870 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4871 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4872 	}
4873 
4874 	if (!sband->vht_cap.vht_supported && !is_6ghz) {
4875 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4876 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4877 	}
4878 
4879 	if (!ieee80211_get_he_sta_cap(sband))
4880 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4881 
4882 	rcu_read_lock();
4883 
4884 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) {
4885 		const u8 *ht_oper_ie, *ht_cap_ie;
4886 
4887 		ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4888 		if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4889 			ht_oper = (void *)(ht_oper_ie + 2);
4890 
4891 		ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4892 		if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4893 			ht_cap = (void *)(ht_cap_ie + 2);
4894 
4895 		if (!ht_cap) {
4896 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4897 			ht_oper = NULL;
4898 		}
4899 	}
4900 
4901 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && !is_6ghz) {
4902 		const u8 *vht_oper_ie, *vht_cap;
4903 
4904 		vht_oper_ie = ieee80211_bss_get_ie(cbss,
4905 						   WLAN_EID_VHT_OPERATION);
4906 		if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4907 			vht_oper = (void *)(vht_oper_ie + 2);
4908 		if (vht_oper && !ht_oper) {
4909 			vht_oper = NULL;
4910 			sdata_info(sdata,
4911 				   "AP advertised VHT without HT, disabling HT/VHT/HE\n");
4912 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4913 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4914 			ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4915 		}
4916 
4917 		vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4918 		if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4919 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4920 			vht_oper = NULL;
4921 		}
4922 	}
4923 
4924 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) {
4925 		const struct cfg80211_bss_ies *ies;
4926 		const u8 *he_oper_ie;
4927 
4928 		ies = rcu_dereference(cbss->ies);
4929 		he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION,
4930 						  ies->data, ies->len);
4931 		if (he_oper_ie &&
4932 		    he_oper_ie[1] == ieee80211_he_oper_size(&he_oper_ie[3]))
4933 			he_oper = (void *)(he_oper_ie + 3);
4934 		else
4935 			he_oper = NULL;
4936 
4937 		if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper))
4938 			ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4939 	}
4940 
4941 	/* Allow VHT if at least one channel on the sband supports 80 MHz */
4942 	have_80mhz = false;
4943 	for (i = 0; i < sband->n_channels; i++) {
4944 		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4945 						IEEE80211_CHAN_NO_80MHZ))
4946 			continue;
4947 
4948 		have_80mhz = true;
4949 		break;
4950 	}
4951 
4952 	if (!have_80mhz)
4953 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4954 
4955 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4956 						     cbss->channel,
4957 						     bss->vht_cap_info,
4958 						     ht_oper, vht_oper, he_oper,
4959 						     &chandef, false);
4960 
4961 	sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4962 				      local->rx_chains);
4963 
4964 	rcu_read_unlock();
4965 
4966 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HE && is_6ghz) {
4967 		sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
4968 		return -EINVAL;
4969 	}
4970 
4971 	/* will change later if needed */
4972 	sdata->smps_mode = IEEE80211_SMPS_OFF;
4973 
4974 	mutex_lock(&local->mtx);
4975 	/*
4976 	 * If this fails (possibly due to channel context sharing
4977 	 * on incompatible channels, e.g. 80+80 and 160 sharing the
4978 	 * same control channel) try to use a smaller bandwidth.
4979 	 */
4980 	ret = ieee80211_vif_use_channel(sdata, &chandef,
4981 					IEEE80211_CHANCTX_SHARED);
4982 
4983 	/* don't downgrade for 5 and 10 MHz channels, though. */
4984 	if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4985 	    chandef.width == NL80211_CHAN_WIDTH_10)
4986 		goto out;
4987 
4988 	while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4989 		ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4990 		ret = ieee80211_vif_use_channel(sdata, &chandef,
4991 						IEEE80211_CHANCTX_SHARED);
4992 	}
4993  out:
4994 	mutex_unlock(&local->mtx);
4995 	return ret;
4996 }
4997 
4998 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies,
4999 			       u8 *dtim_count, u8 *dtim_period)
5000 {
5001 	const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
5002 	const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data,
5003 					 ies->len);
5004 	const struct ieee80211_tim_ie *tim = NULL;
5005 	const struct ieee80211_bssid_index *idx;
5006 	bool valid = tim_ie && tim_ie[1] >= 2;
5007 
5008 	if (valid)
5009 		tim = (void *)(tim_ie + 2);
5010 
5011 	if (dtim_count)
5012 		*dtim_count = valid ? tim->dtim_count : 0;
5013 
5014 	if (dtim_period)
5015 		*dtim_period = valid ? tim->dtim_period : 0;
5016 
5017 	/* Check if value is overridden by non-transmitted profile */
5018 	if (!idx_ie || idx_ie[1] < 3)
5019 		return valid;
5020 
5021 	idx = (void *)(idx_ie + 2);
5022 
5023 	if (dtim_count)
5024 		*dtim_count = idx->dtim_count;
5025 
5026 	if (dtim_period)
5027 		*dtim_period = idx->dtim_period;
5028 
5029 	return true;
5030 }
5031 
5032 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
5033 				     struct cfg80211_bss *cbss, bool assoc,
5034 				     bool override)
5035 {
5036 	struct ieee80211_local *local = sdata->local;
5037 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5038 	struct ieee80211_bss *bss = (void *)cbss->priv;
5039 	struct sta_info *new_sta = NULL;
5040 	struct ieee80211_supported_band *sband;
5041 	bool have_sta = false;
5042 	int err;
5043 
5044 	sband = local->hw.wiphy->bands[cbss->channel->band];
5045 
5046 	if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
5047 		return -EINVAL;
5048 
5049 	/* If a reconfig is happening, bail out */
5050 	if (local->in_reconfig)
5051 		return -EBUSY;
5052 
5053 	if (assoc) {
5054 		rcu_read_lock();
5055 		have_sta = sta_info_get(sdata, cbss->bssid);
5056 		rcu_read_unlock();
5057 	}
5058 
5059 	if (!have_sta) {
5060 		new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
5061 		if (!new_sta)
5062 			return -ENOMEM;
5063 	}
5064 
5065 	/*
5066 	 * Set up the information for the new channel before setting the
5067 	 * new channel. We can't - completely race-free - change the basic
5068 	 * rates bitmap and the channel (sband) that it refers to, but if
5069 	 * we set it up before we at least avoid calling into the driver's
5070 	 * bss_info_changed() method with invalid information (since we do
5071 	 * call that from changing the channel - only for IDLE and perhaps
5072 	 * some others, but ...).
5073 	 *
5074 	 * So to avoid that, just set up all the new information before the
5075 	 * channel, but tell the driver to apply it only afterwards, since
5076 	 * it might need the new channel for that.
5077 	 */
5078 	if (new_sta) {
5079 		u32 rates = 0, basic_rates = 0;
5080 		bool have_higher_than_11mbit;
5081 		int min_rate = INT_MAX, min_rate_index = -1;
5082 		const struct cfg80211_bss_ies *ies;
5083 		int shift = ieee80211_vif_get_shift(&sdata->vif);
5084 
5085 		ieee80211_get_rates(sband, bss->supp_rates,
5086 				    bss->supp_rates_len,
5087 				    &rates, &basic_rates,
5088 				    &have_higher_than_11mbit,
5089 				    &min_rate, &min_rate_index,
5090 				    shift);
5091 
5092 		/*
5093 		 * This used to be a workaround for basic rates missing
5094 		 * in the association response frame. Now that we no
5095 		 * longer use the basic rates from there, it probably
5096 		 * doesn't happen any more, but keep the workaround so
5097 		 * in case some *other* APs are buggy in different ways
5098 		 * we can connect -- with a warning.
5099 		 * Allow this workaround only in case the AP provided at least
5100 		 * one rate.
5101 		 */
5102 		if (min_rate_index < 0) {
5103 			sdata_info(sdata,
5104 				   "No legacy rates in association response\n");
5105 
5106 			sta_info_free(local, new_sta);
5107 			return -EINVAL;
5108 		} else if (!basic_rates) {
5109 			sdata_info(sdata,
5110 				   "No basic rates, using min rate instead\n");
5111 			basic_rates = BIT(min_rate_index);
5112 		}
5113 
5114 		if (rates)
5115 			new_sta->sta.supp_rates[cbss->channel->band] = rates;
5116 		else
5117 			sdata_info(sdata,
5118 				   "No rates found, keeping mandatory only\n");
5119 
5120 		sdata->vif.bss_conf.basic_rates = basic_rates;
5121 
5122 		/* cf. IEEE 802.11 9.2.12 */
5123 		if (cbss->channel->band == NL80211_BAND_2GHZ &&
5124 		    have_higher_than_11mbit)
5125 			sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
5126 		else
5127 			sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
5128 
5129 		memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
5130 
5131 		/* set timing information */
5132 		sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
5133 		rcu_read_lock();
5134 		ies = rcu_dereference(cbss->beacon_ies);
5135 		if (ies) {
5136 			sdata->vif.bss_conf.sync_tsf = ies->tsf;
5137 			sdata->vif.bss_conf.sync_device_ts =
5138 				bss->device_ts_beacon;
5139 
5140 			ieee80211_get_dtim(ies,
5141 					   &sdata->vif.bss_conf.sync_dtim_count,
5142 					   NULL);
5143 		} else if (!ieee80211_hw_check(&sdata->local->hw,
5144 					       TIMING_BEACON_ONLY)) {
5145 			ies = rcu_dereference(cbss->proberesp_ies);
5146 			/* must be non-NULL since beacon IEs were NULL */
5147 			sdata->vif.bss_conf.sync_tsf = ies->tsf;
5148 			sdata->vif.bss_conf.sync_device_ts =
5149 				bss->device_ts_presp;
5150 			sdata->vif.bss_conf.sync_dtim_count = 0;
5151 		} else {
5152 			sdata->vif.bss_conf.sync_tsf = 0;
5153 			sdata->vif.bss_conf.sync_device_ts = 0;
5154 			sdata->vif.bss_conf.sync_dtim_count = 0;
5155 		}
5156 		rcu_read_unlock();
5157 	}
5158 
5159 	if (new_sta || override) {
5160 		err = ieee80211_prep_channel(sdata, cbss);
5161 		if (err) {
5162 			if (new_sta)
5163 				sta_info_free(local, new_sta);
5164 			return -EINVAL;
5165 		}
5166 	}
5167 
5168 	if (new_sta) {
5169 		/*
5170 		 * tell driver about BSSID, basic rates and timing
5171 		 * this was set up above, before setting the channel
5172 		 */
5173 		ieee80211_bss_info_change_notify(sdata,
5174 			BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
5175 			BSS_CHANGED_BEACON_INT);
5176 
5177 		if (assoc)
5178 			sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
5179 
5180 		err = sta_info_insert(new_sta);
5181 		new_sta = NULL;
5182 		if (err) {
5183 			sdata_info(sdata,
5184 				   "failed to insert STA entry for the AP (error %d)\n",
5185 				   err);
5186 			return err;
5187 		}
5188 	} else
5189 		WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
5190 
5191 	/* Cancel scan to ensure that nothing interferes with connection */
5192 	if (local->scanning)
5193 		ieee80211_scan_cancel(local);
5194 
5195 	return 0;
5196 }
5197 
5198 /* config hooks */
5199 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
5200 		       struct cfg80211_auth_request *req)
5201 {
5202 	struct ieee80211_local *local = sdata->local;
5203 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5204 	struct ieee80211_mgd_auth_data *auth_data;
5205 	u16 auth_alg;
5206 	int err;
5207 	bool cont_auth;
5208 
5209 	/* prepare auth data structure */
5210 
5211 	switch (req->auth_type) {
5212 	case NL80211_AUTHTYPE_OPEN_SYSTEM:
5213 		auth_alg = WLAN_AUTH_OPEN;
5214 		break;
5215 	case NL80211_AUTHTYPE_SHARED_KEY:
5216 		if (fips_enabled)
5217 			return -EOPNOTSUPP;
5218 		auth_alg = WLAN_AUTH_SHARED_KEY;
5219 		break;
5220 	case NL80211_AUTHTYPE_FT:
5221 		auth_alg = WLAN_AUTH_FT;
5222 		break;
5223 	case NL80211_AUTHTYPE_NETWORK_EAP:
5224 		auth_alg = WLAN_AUTH_LEAP;
5225 		break;
5226 	case NL80211_AUTHTYPE_SAE:
5227 		auth_alg = WLAN_AUTH_SAE;
5228 		break;
5229 	case NL80211_AUTHTYPE_FILS_SK:
5230 		auth_alg = WLAN_AUTH_FILS_SK;
5231 		break;
5232 	case NL80211_AUTHTYPE_FILS_SK_PFS:
5233 		auth_alg = WLAN_AUTH_FILS_SK_PFS;
5234 		break;
5235 	case NL80211_AUTHTYPE_FILS_PK:
5236 		auth_alg = WLAN_AUTH_FILS_PK;
5237 		break;
5238 	default:
5239 		return -EOPNOTSUPP;
5240 	}
5241 
5242 	if (ifmgd->assoc_data)
5243 		return -EBUSY;
5244 
5245 	auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
5246 			    req->ie_len, GFP_KERNEL);
5247 	if (!auth_data)
5248 		return -ENOMEM;
5249 
5250 	auth_data->bss = req->bss;
5251 
5252 	if (req->auth_data_len >= 4) {
5253 		if (req->auth_type == NL80211_AUTHTYPE_SAE) {
5254 			__le16 *pos = (__le16 *) req->auth_data;
5255 
5256 			auth_data->sae_trans = le16_to_cpu(pos[0]);
5257 			auth_data->sae_status = le16_to_cpu(pos[1]);
5258 		}
5259 		memcpy(auth_data->data, req->auth_data + 4,
5260 		       req->auth_data_len - 4);
5261 		auth_data->data_len += req->auth_data_len - 4;
5262 	}
5263 
5264 	/* Check if continuing authentication or trying to authenticate with the
5265 	 * same BSS that we were in the process of authenticating with and avoid
5266 	 * removal and re-addition of the STA entry in
5267 	 * ieee80211_prep_connection().
5268 	 */
5269 	cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss;
5270 
5271 	if (req->ie && req->ie_len) {
5272 		memcpy(&auth_data->data[auth_data->data_len],
5273 		       req->ie, req->ie_len);
5274 		auth_data->data_len += req->ie_len;
5275 	}
5276 
5277 	if (req->key && req->key_len) {
5278 		auth_data->key_len = req->key_len;
5279 		auth_data->key_idx = req->key_idx;
5280 		memcpy(auth_data->key, req->key, req->key_len);
5281 	}
5282 
5283 	auth_data->algorithm = auth_alg;
5284 
5285 	/* try to authenticate/probe */
5286 
5287 	if (ifmgd->auth_data) {
5288 		if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
5289 			auth_data->peer_confirmed =
5290 				ifmgd->auth_data->peer_confirmed;
5291 		}
5292 		ieee80211_destroy_auth_data(sdata, cont_auth);
5293 	}
5294 
5295 	/* prep auth_data so we don't go into idle on disassoc */
5296 	ifmgd->auth_data = auth_data;
5297 
5298 	/* If this is continuation of an ongoing SAE authentication exchange
5299 	 * (i.e., request to send SAE Confirm) and the peer has already
5300 	 * confirmed, mark authentication completed since we are about to send
5301 	 * out SAE Confirm.
5302 	 */
5303 	if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
5304 	    auth_data->peer_confirmed && auth_data->sae_trans == 2)
5305 		ieee80211_mark_sta_auth(sdata, req->bss->bssid);
5306 
5307 	if (ifmgd->associated) {
5308 		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5309 
5310 		sdata_info(sdata,
5311 			   "disconnect from AP %pM for new auth to %pM\n",
5312 			   ifmgd->associated->bssid, req->bss->bssid);
5313 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5314 				       WLAN_REASON_UNSPECIFIED,
5315 				       false, frame_buf);
5316 
5317 		ieee80211_report_disconnect(sdata, frame_buf,
5318 					    sizeof(frame_buf), true,
5319 					    WLAN_REASON_UNSPECIFIED);
5320 	}
5321 
5322 	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
5323 
5324 	err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false);
5325 	if (err)
5326 		goto err_clear;
5327 
5328 	err = ieee80211_auth(sdata);
5329 	if (err) {
5330 		sta_info_destroy_addr(sdata, req->bss->bssid);
5331 		goto err_clear;
5332 	}
5333 
5334 	/* hold our own reference */
5335 	cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
5336 	return 0;
5337 
5338  err_clear:
5339 	eth_zero_addr(ifmgd->bssid);
5340 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5341 	ifmgd->auth_data = NULL;
5342 	mutex_lock(&sdata->local->mtx);
5343 	ieee80211_vif_release_channel(sdata);
5344 	mutex_unlock(&sdata->local->mtx);
5345 	kfree(auth_data);
5346 	return err;
5347 }
5348 
5349 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
5350 			struct cfg80211_assoc_request *req)
5351 {
5352 	bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ;
5353 	struct ieee80211_local *local = sdata->local;
5354 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5355 	struct ieee80211_bss *bss = (void *)req->bss->priv;
5356 	struct ieee80211_mgd_assoc_data *assoc_data;
5357 	const struct cfg80211_bss_ies *beacon_ies;
5358 	struct ieee80211_supported_band *sband;
5359 	const u8 *ssidie, *ht_ie, *vht_ie;
5360 	int i, err;
5361 	bool override = false;
5362 
5363 	assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
5364 	if (!assoc_data)
5365 		return -ENOMEM;
5366 
5367 	rcu_read_lock();
5368 	ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
5369 	if (!ssidie || ssidie[1] > sizeof(assoc_data->ssid)) {
5370 		rcu_read_unlock();
5371 		kfree(assoc_data);
5372 		return -EINVAL;
5373 	}
5374 	memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
5375 	assoc_data->ssid_len = ssidie[1];
5376 	rcu_read_unlock();
5377 
5378 	if (ifmgd->associated) {
5379 		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5380 
5381 		sdata_info(sdata,
5382 			   "disconnect from AP %pM for new assoc to %pM\n",
5383 			   ifmgd->associated->bssid, req->bss->bssid);
5384 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5385 				       WLAN_REASON_UNSPECIFIED,
5386 				       false, frame_buf);
5387 
5388 		ieee80211_report_disconnect(sdata, frame_buf,
5389 					    sizeof(frame_buf), true,
5390 					    WLAN_REASON_UNSPECIFIED);
5391 	}
5392 
5393 	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
5394 		err = -EBUSY;
5395 		goto err_free;
5396 	}
5397 
5398 	if (ifmgd->assoc_data) {
5399 		err = -EBUSY;
5400 		goto err_free;
5401 	}
5402 
5403 	if (ifmgd->auth_data) {
5404 		bool match;
5405 
5406 		/* keep sta info, bssid if matching */
5407 		match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
5408 		ieee80211_destroy_auth_data(sdata, match);
5409 	}
5410 
5411 	/* prepare assoc data */
5412 
5413 	ifmgd->beacon_crc_valid = false;
5414 
5415 	assoc_data->wmm = bss->wmm_used &&
5416 			  (local->hw.queues >= IEEE80211_NUM_ACS);
5417 
5418 	/*
5419 	 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
5420 	 * We still associate in non-HT mode (11a/b/g) if any one of these
5421 	 * ciphers is configured as pairwise.
5422 	 * We can set this to true for non-11n hardware, that'll be checked
5423 	 * separately along with the peer capabilities.
5424 	 */
5425 	for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
5426 		if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
5427 		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
5428 		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
5429 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5430 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5431 			ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5432 			netdev_info(sdata->dev,
5433 				    "disabling HT/VHT/HE due to WEP/TKIP use\n");
5434 		}
5435 	}
5436 
5437 	sband = local->hw.wiphy->bands[req->bss->channel->band];
5438 
5439 	/* also disable HT/VHT/HE if the AP doesn't use WMM */
5440 	if (!bss->wmm_used) {
5441 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5442 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5443 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5444 		netdev_info(sdata->dev,
5445 			    "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n");
5446 	}
5447 
5448 	memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
5449 	memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
5450 	       sizeof(ifmgd->ht_capa_mask));
5451 
5452 	memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
5453 	memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
5454 	       sizeof(ifmgd->vht_capa_mask));
5455 
5456 	if (req->ie && req->ie_len) {
5457 		memcpy(assoc_data->ie, req->ie, req->ie_len);
5458 		assoc_data->ie_len = req->ie_len;
5459 	}
5460 
5461 	if (req->fils_kek) {
5462 		/* should already be checked in cfg80211 - so warn */
5463 		if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
5464 			err = -EINVAL;
5465 			goto err_free;
5466 		}
5467 		memcpy(assoc_data->fils_kek, req->fils_kek,
5468 		       req->fils_kek_len);
5469 		assoc_data->fils_kek_len = req->fils_kek_len;
5470 	}
5471 
5472 	if (req->fils_nonces)
5473 		memcpy(assoc_data->fils_nonces, req->fils_nonces,
5474 		       2 * FILS_NONCE_LEN);
5475 
5476 	assoc_data->bss = req->bss;
5477 
5478 	if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
5479 		if (ifmgd->powersave)
5480 			sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
5481 		else
5482 			sdata->smps_mode = IEEE80211_SMPS_OFF;
5483 	} else
5484 		sdata->smps_mode = ifmgd->req_smps;
5485 
5486 	assoc_data->capability = req->bss->capability;
5487 	assoc_data->supp_rates = bss->supp_rates;
5488 	assoc_data->supp_rates_len = bss->supp_rates_len;
5489 
5490 	rcu_read_lock();
5491 	ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
5492 	if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
5493 		assoc_data->ap_ht_param =
5494 			((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
5495 	else if (!is_6ghz)
5496 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5497 	vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
5498 	if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
5499 		memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
5500 		       sizeof(struct ieee80211_vht_cap));
5501 	else if (!is_6ghz)
5502 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT |
5503 				IEEE80211_STA_DISABLE_HE;
5504 	rcu_read_unlock();
5505 
5506 	if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
5507 		 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
5508 	     "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
5509 		sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
5510 
5511 	if (bss->wmm_used && bss->uapsd_supported &&
5512 	    (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
5513 		assoc_data->uapsd = true;
5514 		ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
5515 	} else {
5516 		assoc_data->uapsd = false;
5517 		ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
5518 	}
5519 
5520 	if (req->prev_bssid)
5521 		memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
5522 
5523 	if (req->use_mfp) {
5524 		ifmgd->mfp = IEEE80211_MFP_REQUIRED;
5525 		ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
5526 	} else {
5527 		ifmgd->mfp = IEEE80211_MFP_DISABLED;
5528 		ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
5529 	}
5530 
5531 	if (req->flags & ASSOC_REQ_USE_RRM)
5532 		ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
5533 	else
5534 		ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
5535 
5536 	if (req->crypto.control_port)
5537 		ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
5538 	else
5539 		ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
5540 
5541 	sdata->control_port_protocol = req->crypto.control_port_ethertype;
5542 	sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
5543 	sdata->control_port_over_nl80211 =
5544 					req->crypto.control_port_over_nl80211;
5545 	sdata->control_port_no_preauth = req->crypto.control_port_no_preauth;
5546 	sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
5547 							sdata->vif.type);
5548 
5549 	/* kick off associate process */
5550 
5551 	ifmgd->assoc_data = assoc_data;
5552 	ifmgd->dtim_period = 0;
5553 	ifmgd->have_beacon = false;
5554 
5555 	/* override HT/VHT configuration only if the AP and we support it */
5556 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
5557 		struct ieee80211_sta_ht_cap sta_ht_cap;
5558 
5559 		if (req->flags & ASSOC_REQ_DISABLE_HT)
5560 			override = true;
5561 
5562 		memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
5563 		ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
5564 
5565 		/* check for 40 MHz disable override */
5566 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
5567 		    sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
5568 		    !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
5569 			override = true;
5570 
5571 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
5572 		    req->flags & ASSOC_REQ_DISABLE_VHT)
5573 			override = true;
5574 	}
5575 
5576 	if (req->flags & ASSOC_REQ_DISABLE_HT) {
5577 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5578 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5579 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5580 	}
5581 
5582 	if (req->flags & ASSOC_REQ_DISABLE_VHT)
5583 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5584 
5585 	err = ieee80211_prep_connection(sdata, req->bss, true, override);
5586 	if (err)
5587 		goto err_clear;
5588 
5589 	rcu_read_lock();
5590 	beacon_ies = rcu_dereference(req->bss->beacon_ies);
5591 
5592 	if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
5593 	    !beacon_ies) {
5594 		/*
5595 		 * Wait up to one beacon interval ...
5596 		 * should this be more if we miss one?
5597 		 */
5598 		sdata_info(sdata, "waiting for beacon from %pM\n",
5599 			   ifmgd->bssid);
5600 		assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
5601 		assoc_data->timeout_started = true;
5602 		assoc_data->need_beacon = true;
5603 	} else if (beacon_ies) {
5604 		const struct element *elem;
5605 		u8 dtim_count = 0;
5606 
5607 		ieee80211_get_dtim(beacon_ies, &dtim_count,
5608 				   &ifmgd->dtim_period);
5609 
5610 		ifmgd->have_beacon = true;
5611 		assoc_data->timeout = jiffies;
5612 		assoc_data->timeout_started = true;
5613 
5614 		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
5615 			sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
5616 			sdata->vif.bss_conf.sync_device_ts =
5617 				bss->device_ts_beacon;
5618 			sdata->vif.bss_conf.sync_dtim_count = dtim_count;
5619 		}
5620 
5621 		elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION,
5622 					      beacon_ies->data, beacon_ies->len);
5623 		if (elem && elem->datalen >= 3)
5624 			sdata->vif.bss_conf.profile_periodicity = elem->data[2];
5625 
5626 		elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
5627 					  beacon_ies->data, beacon_ies->len);
5628 		if (elem && elem->datalen >= 11 &&
5629 		    (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
5630 			sdata->vif.bss_conf.ema_ap = true;
5631 	} else {
5632 		assoc_data->timeout = jiffies;
5633 		assoc_data->timeout_started = true;
5634 	}
5635 	rcu_read_unlock();
5636 
5637 	run_again(sdata, assoc_data->timeout);
5638 
5639 	if (bss->corrupt_data) {
5640 		char *corrupt_type = "data";
5641 		if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
5642 			if (bss->corrupt_data &
5643 					IEEE80211_BSS_CORRUPT_PROBE_RESP)
5644 				corrupt_type = "beacon and probe response";
5645 			else
5646 				corrupt_type = "beacon";
5647 		} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
5648 			corrupt_type = "probe response";
5649 		sdata_info(sdata, "associating with AP with corrupt %s\n",
5650 			   corrupt_type);
5651 	}
5652 
5653 	return 0;
5654  err_clear:
5655 	eth_zero_addr(ifmgd->bssid);
5656 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5657 	ifmgd->assoc_data = NULL;
5658  err_free:
5659 	kfree(assoc_data);
5660 	return err;
5661 }
5662 
5663 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
5664 			 struct cfg80211_deauth_request *req)
5665 {
5666 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5667 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5668 	bool tx = !req->local_state_change;
5669 
5670 	if (ifmgd->auth_data &&
5671 	    ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
5672 		sdata_info(sdata,
5673 			   "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
5674 			   req->bssid, req->reason_code,
5675 			   ieee80211_get_reason_code_string(req->reason_code));
5676 
5677 		drv_mgd_prepare_tx(sdata->local, sdata, 0);
5678 		ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
5679 					       IEEE80211_STYPE_DEAUTH,
5680 					       req->reason_code, tx,
5681 					       frame_buf);
5682 		ieee80211_destroy_auth_data(sdata, false);
5683 		ieee80211_report_disconnect(sdata, frame_buf,
5684 					    sizeof(frame_buf), true,
5685 					    req->reason_code);
5686 
5687 		return 0;
5688 	}
5689 
5690 	if (ifmgd->assoc_data &&
5691 	    ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
5692 		sdata_info(sdata,
5693 			   "aborting association with %pM by local choice (Reason: %u=%s)\n",
5694 			   req->bssid, req->reason_code,
5695 			   ieee80211_get_reason_code_string(req->reason_code));
5696 
5697 		drv_mgd_prepare_tx(sdata->local, sdata, 0);
5698 		ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
5699 					       IEEE80211_STYPE_DEAUTH,
5700 					       req->reason_code, tx,
5701 					       frame_buf);
5702 		ieee80211_destroy_assoc_data(sdata, false, true);
5703 		ieee80211_report_disconnect(sdata, frame_buf,
5704 					    sizeof(frame_buf), true,
5705 					    req->reason_code);
5706 		return 0;
5707 	}
5708 
5709 	if (ifmgd->associated &&
5710 	    ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
5711 		sdata_info(sdata,
5712 			   "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
5713 			   req->bssid, req->reason_code,
5714 			   ieee80211_get_reason_code_string(req->reason_code));
5715 
5716 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5717 				       req->reason_code, tx, frame_buf);
5718 		ieee80211_report_disconnect(sdata, frame_buf,
5719 					    sizeof(frame_buf), true,
5720 					    req->reason_code);
5721 		return 0;
5722 	}
5723 
5724 	return -ENOTCONN;
5725 }
5726 
5727 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
5728 			   struct cfg80211_disassoc_request *req)
5729 {
5730 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5731 	u8 bssid[ETH_ALEN];
5732 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5733 
5734 	/*
5735 	 * cfg80211 should catch this ... but it's racy since
5736 	 * we can receive a disassoc frame, process it, hand it
5737 	 * to cfg80211 while that's in a locked section already
5738 	 * trying to tell us that the user wants to disconnect.
5739 	 */
5740 	if (ifmgd->associated != req->bss)
5741 		return -ENOLINK;
5742 
5743 	sdata_info(sdata,
5744 		   "disassociating from %pM by local choice (Reason: %u=%s)\n",
5745 		   req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5746 
5747 	memcpy(bssid, req->bss->bssid, ETH_ALEN);
5748 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5749 			       req->reason_code, !req->local_state_change,
5750 			       frame_buf);
5751 
5752 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5753 				    req->reason_code);
5754 
5755 	return 0;
5756 }
5757 
5758 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5759 {
5760 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5761 
5762 	/*
5763 	 * Make sure some work items will not run after this,
5764 	 * they will not do anything but might not have been
5765 	 * cancelled when disconnecting.
5766 	 */
5767 	cancel_work_sync(&ifmgd->monitor_work);
5768 	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5769 	cancel_work_sync(&ifmgd->request_smps_work);
5770 	cancel_work_sync(&ifmgd->csa_connection_drop_work);
5771 	cancel_work_sync(&ifmgd->chswitch_work);
5772 	cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5773 
5774 	sdata_lock(sdata);
5775 	if (ifmgd->assoc_data) {
5776 		struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5777 		ieee80211_destroy_assoc_data(sdata, false, false);
5778 		cfg80211_assoc_timeout(sdata->dev, bss);
5779 	}
5780 	if (ifmgd->auth_data)
5781 		ieee80211_destroy_auth_data(sdata, false);
5782 	spin_lock_bh(&ifmgd->teardown_lock);
5783 	if (ifmgd->teardown_skb) {
5784 		kfree_skb(ifmgd->teardown_skb);
5785 		ifmgd->teardown_skb = NULL;
5786 		ifmgd->orig_teardown_skb = NULL;
5787 	}
5788 	kfree(ifmgd->assoc_req_ies);
5789 	ifmgd->assoc_req_ies = NULL;
5790 	ifmgd->assoc_req_ies_len = 0;
5791 	spin_unlock_bh(&ifmgd->teardown_lock);
5792 	del_timer_sync(&ifmgd->timer);
5793 	sdata_unlock(sdata);
5794 }
5795 
5796 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5797 			       enum nl80211_cqm_rssi_threshold_event rssi_event,
5798 			       s32 rssi_level,
5799 			       gfp_t gfp)
5800 {
5801 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5802 
5803 	trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
5804 
5805 	cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
5806 }
5807 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5808 
5809 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5810 {
5811 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5812 
5813 	trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5814 
5815 	cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5816 }
5817 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);
5818