xref: /openbmc/linux/net/mac80211/mlme.c (revision 160b8e75)
1 /*
2  * BSS client mode implementation
3  * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4  * Copyright 2004, Instant802 Networks, Inc.
5  * Copyright 2005, Devicescape Software, Inc.
6  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
7  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8  * Copyright 2013-2014  Intel Mobile Communications GmbH
9  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License version 2 as
13  * published by the Free Software Foundation.
14  */
15 
16 #include <linux/delay.h>
17 #include <linux/if_ether.h>
18 #include <linux/skbuff.h>
19 #include <linux/if_arp.h>
20 #include <linux/etherdevice.h>
21 #include <linux/moduleparam.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
28 
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
31 #include "rate.h"
32 #include "led.h"
33 #include "fils_aead.h"
34 
35 #define IEEE80211_AUTH_TIMEOUT		(HZ / 5)
36 #define IEEE80211_AUTH_TIMEOUT_LONG	(HZ / 2)
37 #define IEEE80211_AUTH_TIMEOUT_SHORT	(HZ / 10)
38 #define IEEE80211_AUTH_MAX_TRIES	3
39 #define IEEE80211_AUTH_WAIT_ASSOC	(HZ * 5)
40 #define IEEE80211_ASSOC_TIMEOUT		(HZ / 5)
41 #define IEEE80211_ASSOC_TIMEOUT_LONG	(HZ / 2)
42 #define IEEE80211_ASSOC_TIMEOUT_SHORT	(HZ / 10)
43 #define IEEE80211_ASSOC_MAX_TRIES	3
44 
45 static int max_nullfunc_tries = 2;
46 module_param(max_nullfunc_tries, int, 0644);
47 MODULE_PARM_DESC(max_nullfunc_tries,
48 		 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 
50 static int max_probe_tries = 5;
51 module_param(max_probe_tries, int, 0644);
52 MODULE_PARM_DESC(max_probe_tries,
53 		 "Maximum probe tries before disconnecting (reason 4).");
54 
55 /*
56  * Beacon loss timeout is calculated as N frames times the
57  * advertised beacon interval.  This may need to be somewhat
58  * higher than what hardware might detect to account for
59  * delays in the host processing frames. But since we also
60  * probe on beacon miss before declaring the connection lost
61  * default to what we want.
62  */
63 static int beacon_loss_count = 7;
64 module_param(beacon_loss_count, int, 0644);
65 MODULE_PARM_DESC(beacon_loss_count,
66 		 "Number of beacon intervals before we decide beacon was lost.");
67 
68 /*
69  * Time the connection can be idle before we probe
70  * it to see if we can still talk to the AP.
71  */
72 #define IEEE80211_CONNECTION_IDLE_TIME	(30 * HZ)
73 /*
74  * Time we wait for a probe response after sending
75  * a probe request because of beacon loss or for
76  * checking the connection still works.
77  */
78 static int probe_wait_ms = 500;
79 module_param(probe_wait_ms, int, 0644);
80 MODULE_PARM_DESC(probe_wait_ms,
81 		 "Maximum time(ms) to wait for probe response"
82 		 " before disconnecting (reason 4).");
83 
84 /*
85  * How many Beacon frames need to have been used in average signal strength
86  * before starting to indicate signal change events.
87  */
88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT	4
89 
90 /*
91  * We can have multiple work items (and connection probing)
92  * scheduling this timer, but we need to take care to only
93  * reschedule it when it should fire _earlier_ than it was
94  * asked for before, or if it's not pending right now. This
95  * function ensures that. Note that it then is required to
96  * run this function for all timeouts after the first one
97  * has happened -- the work that runs from this timer will
98  * do that.
99  */
100 static void run_again(struct ieee80211_sub_if_data *sdata,
101 		      unsigned long timeout)
102 {
103 	sdata_assert_lock(sdata);
104 
105 	if (!timer_pending(&sdata->u.mgd.timer) ||
106 	    time_before(timeout, sdata->u.mgd.timer.expires))
107 		mod_timer(&sdata->u.mgd.timer, timeout);
108 }
109 
110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
111 {
112 	if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
113 		return;
114 
115 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
116 		return;
117 
118 	mod_timer(&sdata->u.mgd.bcn_mon_timer,
119 		  round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
120 }
121 
122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
123 {
124 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
125 
126 	if (unlikely(!ifmgd->associated))
127 		return;
128 
129 	if (ifmgd->probe_send_count)
130 		ifmgd->probe_send_count = 0;
131 
132 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
133 		return;
134 
135 	mod_timer(&ifmgd->conn_mon_timer,
136 		  round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
137 }
138 
139 static int ecw2cw(int ecw)
140 {
141 	return (1 << ecw) - 1;
142 }
143 
144 static u32
145 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
146 			     struct ieee80211_supported_band *sband,
147 			     struct ieee80211_channel *channel,
148 			     const struct ieee80211_ht_operation *ht_oper,
149 			     const struct ieee80211_vht_operation *vht_oper,
150 			     struct cfg80211_chan_def *chandef, bool tracking)
151 {
152 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
153 	struct cfg80211_chan_def vht_chandef;
154 	struct ieee80211_sta_ht_cap sta_ht_cap;
155 	u32 ht_cfreq, ret;
156 
157 	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
158 	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
159 
160 	chandef->chan = channel;
161 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
162 	chandef->center_freq1 = channel->center_freq;
163 	chandef->center_freq2 = 0;
164 
165 	if (!ht_oper || !sta_ht_cap.ht_supported) {
166 		ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
167 		goto out;
168 	}
169 
170 	chandef->width = NL80211_CHAN_WIDTH_20;
171 
172 	ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
173 						  channel->band);
174 	/* check that channel matches the right operating channel */
175 	if (!tracking && channel->center_freq != ht_cfreq) {
176 		/*
177 		 * It's possible that some APs are confused here;
178 		 * Netgear WNDR3700 sometimes reports 4 higher than
179 		 * the actual channel in association responses, but
180 		 * since we look at probe response/beacon data here
181 		 * it should be OK.
182 		 */
183 		sdata_info(sdata,
184 			   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
185 			   channel->center_freq, ht_cfreq,
186 			   ht_oper->primary_chan, channel->band);
187 		ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
188 		goto out;
189 	}
190 
191 	/* check 40 MHz support, if we have it */
192 	if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
193 		ieee80211_chandef_ht_oper(ht_oper, chandef);
194 	} else {
195 		/* 40 MHz (and 80 MHz) must be supported for VHT */
196 		ret = IEEE80211_STA_DISABLE_VHT;
197 		/* also mark 40 MHz disabled */
198 		ret |= IEEE80211_STA_DISABLE_40MHZ;
199 		goto out;
200 	}
201 
202 	if (!vht_oper || !sband->vht_cap.vht_supported) {
203 		ret = IEEE80211_STA_DISABLE_VHT;
204 		goto out;
205 	}
206 
207 	vht_chandef = *chandef;
208 	if (!ieee80211_chandef_vht_oper(vht_oper, &vht_chandef)) {
209 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
210 			sdata_info(sdata,
211 				   "AP VHT information is invalid, disable VHT\n");
212 		ret = IEEE80211_STA_DISABLE_VHT;
213 		goto out;
214 	}
215 
216 	if (!cfg80211_chandef_valid(&vht_chandef)) {
217 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
218 			sdata_info(sdata,
219 				   "AP VHT information is invalid, disable VHT\n");
220 		ret = IEEE80211_STA_DISABLE_VHT;
221 		goto out;
222 	}
223 
224 	if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
225 		ret = 0;
226 		goto out;
227 	}
228 
229 	if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
230 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
231 			sdata_info(sdata,
232 				   "AP VHT information doesn't match HT, disable VHT\n");
233 		ret = IEEE80211_STA_DISABLE_VHT;
234 		goto out;
235 	}
236 
237 	*chandef = vht_chandef;
238 
239 	ret = 0;
240 
241 out:
242 	/*
243 	 * When tracking the current AP, don't do any further checks if the
244 	 * new chandef is identical to the one we're currently using for the
245 	 * connection. This keeps us from playing ping-pong with regulatory,
246 	 * without it the following can happen (for example):
247 	 *  - connect to an AP with 80 MHz, world regdom allows 80 MHz
248 	 *  - AP advertises regdom US
249 	 *  - CRDA loads regdom US with 80 MHz prohibited (old database)
250 	 *  - the code below detects an unsupported channel, downgrades, and
251 	 *    we disconnect from the AP in the caller
252 	 *  - disconnect causes CRDA to reload world regdomain and the game
253 	 *    starts anew.
254 	 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
255 	 *
256 	 * It seems possible that there are still scenarios with CSA or real
257 	 * bandwidth changes where a this could happen, but those cases are
258 	 * less common and wouldn't completely prevent using the AP.
259 	 */
260 	if (tracking &&
261 	    cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
262 		return ret;
263 
264 	/* don't print the message below for VHT mismatch if VHT is disabled */
265 	if (ret & IEEE80211_STA_DISABLE_VHT)
266 		vht_chandef = *chandef;
267 
268 	/*
269 	 * Ignore the DISABLED flag when we're already connected and only
270 	 * tracking the APs beacon for bandwidth changes - otherwise we
271 	 * might get disconnected here if we connect to an AP, update our
272 	 * regulatory information based on the AP's country IE and the
273 	 * information we have is wrong/outdated and disables the channel
274 	 * that we're actually using for the connection to the AP.
275 	 */
276 	while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
277 					tracking ? 0 :
278 						   IEEE80211_CHAN_DISABLED)) {
279 		if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
280 			ret = IEEE80211_STA_DISABLE_HT |
281 			      IEEE80211_STA_DISABLE_VHT;
282 			break;
283 		}
284 
285 		ret |= ieee80211_chandef_downgrade(chandef);
286 	}
287 
288 	if (chandef->width != vht_chandef.width && !tracking)
289 		sdata_info(sdata,
290 			   "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
291 
292 	WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
293 	return ret;
294 }
295 
296 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
297 			       struct sta_info *sta,
298 			       const struct ieee80211_ht_cap *ht_cap,
299 			       const struct ieee80211_ht_operation *ht_oper,
300 			       const struct ieee80211_vht_operation *vht_oper,
301 			       const u8 *bssid, u32 *changed)
302 {
303 	struct ieee80211_local *local = sdata->local;
304 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
305 	struct ieee80211_supported_band *sband;
306 	struct ieee80211_channel *chan;
307 	struct cfg80211_chan_def chandef;
308 	u16 ht_opmode;
309 	u32 flags;
310 	enum ieee80211_sta_rx_bandwidth new_sta_bw;
311 	int ret;
312 
313 	/* if HT was/is disabled, don't track any bandwidth changes */
314 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
315 		return 0;
316 
317 	/* don't check VHT if we associated as non-VHT station */
318 	if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
319 		vht_oper = NULL;
320 
321 	if (WARN_ON_ONCE(!sta))
322 		return -EINVAL;
323 
324 	/*
325 	 * if bss configuration changed store the new one -
326 	 * this may be applicable even if channel is identical
327 	 */
328 	ht_opmode = le16_to_cpu(ht_oper->operation_mode);
329 	if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
330 		*changed |= BSS_CHANGED_HT;
331 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
332 	}
333 
334 	chan = sdata->vif.bss_conf.chandef.chan;
335 	sband = local->hw.wiphy->bands[chan->band];
336 
337 	/* calculate new channel (type) based on HT/VHT operation IEs */
338 	flags = ieee80211_determine_chantype(sdata, sband, chan,
339 					     ht_oper, vht_oper,
340 					     &chandef, true);
341 
342 	/*
343 	 * Downgrade the new channel if we associated with restricted
344 	 * capabilities. For example, if we associated as a 20 MHz STA
345 	 * to a 40 MHz AP (due to regulatory, capabilities or config
346 	 * reasons) then switching to a 40 MHz channel now won't do us
347 	 * any good -- we couldn't use it with the AP.
348 	 */
349 	if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
350 	    chandef.width == NL80211_CHAN_WIDTH_80P80)
351 		flags |= ieee80211_chandef_downgrade(&chandef);
352 	if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
353 	    chandef.width == NL80211_CHAN_WIDTH_160)
354 		flags |= ieee80211_chandef_downgrade(&chandef);
355 	if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
356 	    chandef.width > NL80211_CHAN_WIDTH_20)
357 		flags |= ieee80211_chandef_downgrade(&chandef);
358 
359 	if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
360 		return 0;
361 
362 	sdata_info(sdata,
363 		   "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
364 		   ifmgd->bssid, chandef.chan->center_freq, chandef.width,
365 		   chandef.center_freq1, chandef.center_freq2);
366 
367 	if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
368 				      IEEE80211_STA_DISABLE_VHT |
369 				      IEEE80211_STA_DISABLE_40MHZ |
370 				      IEEE80211_STA_DISABLE_80P80MHZ |
371 				      IEEE80211_STA_DISABLE_160MHZ)) ||
372 	    !cfg80211_chandef_valid(&chandef)) {
373 		sdata_info(sdata,
374 			   "AP %pM changed bandwidth in a way we can't support - disconnect\n",
375 			   ifmgd->bssid);
376 		return -EINVAL;
377 	}
378 
379 	switch (chandef.width) {
380 	case NL80211_CHAN_WIDTH_20_NOHT:
381 	case NL80211_CHAN_WIDTH_20:
382 		new_sta_bw = IEEE80211_STA_RX_BW_20;
383 		break;
384 	case NL80211_CHAN_WIDTH_40:
385 		new_sta_bw = IEEE80211_STA_RX_BW_40;
386 		break;
387 	case NL80211_CHAN_WIDTH_80:
388 		new_sta_bw = IEEE80211_STA_RX_BW_80;
389 		break;
390 	case NL80211_CHAN_WIDTH_80P80:
391 	case NL80211_CHAN_WIDTH_160:
392 		new_sta_bw = IEEE80211_STA_RX_BW_160;
393 		break;
394 	default:
395 		return -EINVAL;
396 	}
397 
398 	if (new_sta_bw > sta->cur_max_bandwidth)
399 		new_sta_bw = sta->cur_max_bandwidth;
400 
401 	if (new_sta_bw < sta->sta.bandwidth) {
402 		sta->sta.bandwidth = new_sta_bw;
403 		rate_control_rate_update(local, sband, sta,
404 					 IEEE80211_RC_BW_CHANGED);
405 	}
406 
407 	ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
408 	if (ret) {
409 		sdata_info(sdata,
410 			   "AP %pM changed bandwidth to incompatible one - disconnect\n",
411 			   ifmgd->bssid);
412 		return ret;
413 	}
414 
415 	if (new_sta_bw > sta->sta.bandwidth) {
416 		sta->sta.bandwidth = new_sta_bw;
417 		rate_control_rate_update(local, sband, sta,
418 					 IEEE80211_RC_BW_CHANGED);
419 	}
420 
421 	return 0;
422 }
423 
424 /* frame sending functions */
425 
426 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
427 				struct sk_buff *skb, u8 ap_ht_param,
428 				struct ieee80211_supported_band *sband,
429 				struct ieee80211_channel *channel,
430 				enum ieee80211_smps_mode smps)
431 {
432 	u8 *pos;
433 	u32 flags = channel->flags;
434 	u16 cap;
435 	struct ieee80211_sta_ht_cap ht_cap;
436 
437 	BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
438 
439 	memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
440 	ieee80211_apply_htcap_overrides(sdata, &ht_cap);
441 
442 	/* determine capability flags */
443 	cap = ht_cap.cap;
444 
445 	switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
446 	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
447 		if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
448 			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
449 			cap &= ~IEEE80211_HT_CAP_SGI_40;
450 		}
451 		break;
452 	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
453 		if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
454 			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
455 			cap &= ~IEEE80211_HT_CAP_SGI_40;
456 		}
457 		break;
458 	}
459 
460 	/*
461 	 * If 40 MHz was disabled associate as though we weren't
462 	 * capable of 40 MHz -- some broken APs will never fall
463 	 * back to trying to transmit in 20 MHz.
464 	 */
465 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
466 		cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
467 		cap &= ~IEEE80211_HT_CAP_SGI_40;
468 	}
469 
470 	/* set SM PS mode properly */
471 	cap &= ~IEEE80211_HT_CAP_SM_PS;
472 	switch (smps) {
473 	case IEEE80211_SMPS_AUTOMATIC:
474 	case IEEE80211_SMPS_NUM_MODES:
475 		WARN_ON(1);
476 		/* fall through */
477 	case IEEE80211_SMPS_OFF:
478 		cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
479 			IEEE80211_HT_CAP_SM_PS_SHIFT;
480 		break;
481 	case IEEE80211_SMPS_STATIC:
482 		cap |= WLAN_HT_CAP_SM_PS_STATIC <<
483 			IEEE80211_HT_CAP_SM_PS_SHIFT;
484 		break;
485 	case IEEE80211_SMPS_DYNAMIC:
486 		cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
487 			IEEE80211_HT_CAP_SM_PS_SHIFT;
488 		break;
489 	}
490 
491 	/* reserve and fill IE */
492 	pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
493 	ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
494 }
495 
496 /* This function determines vht capability flags for the association
497  * and builds the IE.
498  * Note - the function may set the owner of the MU-MIMO capability
499  */
500 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
501 				 struct sk_buff *skb,
502 				 struct ieee80211_supported_band *sband,
503 				 struct ieee80211_vht_cap *ap_vht_cap)
504 {
505 	struct ieee80211_local *local = sdata->local;
506 	u8 *pos;
507 	u32 cap;
508 	struct ieee80211_sta_vht_cap vht_cap;
509 	u32 mask, ap_bf_sts, our_bf_sts;
510 
511 	BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
512 
513 	memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
514 	ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
515 
516 	/* determine capability flags */
517 	cap = vht_cap.cap;
518 
519 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
520 		u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
521 
522 		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
523 		if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
524 		    bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
525 			cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
526 	}
527 
528 	if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
529 		cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
530 		cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
531 	}
532 
533 	/*
534 	 * Some APs apparently get confused if our capabilities are better
535 	 * than theirs, so restrict what we advertise in the assoc request.
536 	 */
537 	if (!(ap_vht_cap->vht_cap_info &
538 			cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
539 		cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
540 			 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
541 	else if (!(ap_vht_cap->vht_cap_info &
542 			cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
543 		cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
544 
545 	/*
546 	 * If some other vif is using the MU-MIMO capablity we cannot associate
547 	 * using MU-MIMO - this will lead to contradictions in the group-id
548 	 * mechanism.
549 	 * Ownership is defined since association request, in order to avoid
550 	 * simultaneous associations with MU-MIMO.
551 	 */
552 	if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
553 		bool disable_mu_mimo = false;
554 		struct ieee80211_sub_if_data *other;
555 
556 		list_for_each_entry_rcu(other, &local->interfaces, list) {
557 			if (other->vif.mu_mimo_owner) {
558 				disable_mu_mimo = true;
559 				break;
560 			}
561 		}
562 		if (disable_mu_mimo)
563 			cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
564 		else
565 			sdata->vif.mu_mimo_owner = true;
566 	}
567 
568 	mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
569 
570 	ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
571 	our_bf_sts = cap & mask;
572 
573 	if (ap_bf_sts < our_bf_sts) {
574 		cap &= ~mask;
575 		cap |= ap_bf_sts;
576 	}
577 
578 	/* reserve and fill IE */
579 	pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
580 	ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
581 }
582 
583 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
584 {
585 	struct ieee80211_local *local = sdata->local;
586 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
587 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
588 	struct sk_buff *skb;
589 	struct ieee80211_mgmt *mgmt;
590 	u8 *pos, qos_info;
591 	size_t offset = 0, noffset;
592 	int i, count, rates_len, supp_rates_len, shift;
593 	u16 capab;
594 	struct ieee80211_supported_band *sband;
595 	struct ieee80211_chanctx_conf *chanctx_conf;
596 	struct ieee80211_channel *chan;
597 	u32 rates = 0;
598 
599 	sdata_assert_lock(sdata);
600 
601 	rcu_read_lock();
602 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
603 	if (WARN_ON(!chanctx_conf)) {
604 		rcu_read_unlock();
605 		return;
606 	}
607 	chan = chanctx_conf->def.chan;
608 	rcu_read_unlock();
609 	sband = local->hw.wiphy->bands[chan->band];
610 	shift = ieee80211_vif_get_shift(&sdata->vif);
611 
612 	if (assoc_data->supp_rates_len) {
613 		/*
614 		 * Get all rates supported by the device and the AP as
615 		 * some APs don't like getting a superset of their rates
616 		 * in the association request (e.g. D-Link DAP 1353 in
617 		 * b-only mode)...
618 		 */
619 		rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
620 						     assoc_data->supp_rates,
621 						     assoc_data->supp_rates_len,
622 						     &rates);
623 	} else {
624 		/*
625 		 * In case AP not provide any supported rates information
626 		 * before association, we send information element(s) with
627 		 * all rates that we support.
628 		 */
629 		rates_len = 0;
630 		for (i = 0; i < sband->n_bitrates; i++) {
631 			rates |= BIT(i);
632 			rates_len++;
633 		}
634 	}
635 
636 	skb = alloc_skb(local->hw.extra_tx_headroom +
637 			sizeof(*mgmt) + /* bit too much but doesn't matter */
638 			2 + assoc_data->ssid_len + /* SSID */
639 			4 + rates_len + /* (extended) rates */
640 			4 + /* power capability */
641 			2 + 2 * sband->n_channels + /* supported channels */
642 			2 + sizeof(struct ieee80211_ht_cap) + /* HT */
643 			2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
644 			assoc_data->ie_len + /* extra IEs */
645 			(assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
646 			9, /* WMM */
647 			GFP_KERNEL);
648 	if (!skb)
649 		return;
650 
651 	skb_reserve(skb, local->hw.extra_tx_headroom);
652 
653 	capab = WLAN_CAPABILITY_ESS;
654 
655 	if (sband->band == NL80211_BAND_2GHZ) {
656 		capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
657 		capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
658 	}
659 
660 	if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
661 		capab |= WLAN_CAPABILITY_PRIVACY;
662 
663 	if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
664 	    ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
665 		capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
666 
667 	if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
668 		capab |= WLAN_CAPABILITY_RADIO_MEASURE;
669 
670 	mgmt = skb_put_zero(skb, 24);
671 	memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
672 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
673 	memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
674 
675 	if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
676 		skb_put(skb, 10);
677 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
678 						  IEEE80211_STYPE_REASSOC_REQ);
679 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
680 		mgmt->u.reassoc_req.listen_interval =
681 				cpu_to_le16(local->hw.conf.listen_interval);
682 		memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
683 		       ETH_ALEN);
684 	} else {
685 		skb_put(skb, 4);
686 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
687 						  IEEE80211_STYPE_ASSOC_REQ);
688 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
689 		mgmt->u.assoc_req.listen_interval =
690 				cpu_to_le16(local->hw.conf.listen_interval);
691 	}
692 
693 	/* SSID */
694 	pos = skb_put(skb, 2 + assoc_data->ssid_len);
695 	*pos++ = WLAN_EID_SSID;
696 	*pos++ = assoc_data->ssid_len;
697 	memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
698 
699 	/* add all rates which were marked to be used above */
700 	supp_rates_len = rates_len;
701 	if (supp_rates_len > 8)
702 		supp_rates_len = 8;
703 
704 	pos = skb_put(skb, supp_rates_len + 2);
705 	*pos++ = WLAN_EID_SUPP_RATES;
706 	*pos++ = supp_rates_len;
707 
708 	count = 0;
709 	for (i = 0; i < sband->n_bitrates; i++) {
710 		if (BIT(i) & rates) {
711 			int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
712 						5 * (1 << shift));
713 			*pos++ = (u8) rate;
714 			if (++count == 8)
715 				break;
716 		}
717 	}
718 
719 	if (rates_len > count) {
720 		pos = skb_put(skb, rates_len - count + 2);
721 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
722 		*pos++ = rates_len - count;
723 
724 		for (i++; i < sband->n_bitrates; i++) {
725 			if (BIT(i) & rates) {
726 				int rate;
727 				rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
728 						    5 * (1 << shift));
729 				*pos++ = (u8) rate;
730 			}
731 		}
732 	}
733 
734 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
735 	    capab & WLAN_CAPABILITY_RADIO_MEASURE) {
736 		pos = skb_put(skb, 4);
737 		*pos++ = WLAN_EID_PWR_CAPABILITY;
738 		*pos++ = 2;
739 		*pos++ = 0; /* min tx power */
740 		 /* max tx power */
741 		*pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
742 	}
743 
744 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
745 		/* TODO: get this in reg domain format */
746 		pos = skb_put(skb, 2 * sband->n_channels + 2);
747 		*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
748 		*pos++ = 2 * sband->n_channels;
749 		for (i = 0; i < sband->n_channels; i++) {
750 			*pos++ = ieee80211_frequency_to_channel(
751 					sband->channels[i].center_freq);
752 			*pos++ = 1; /* one channel in the subband*/
753 		}
754 	}
755 
756 	/* if present, add any custom IEs that go before HT */
757 	if (assoc_data->ie_len) {
758 		static const u8 before_ht[] = {
759 			WLAN_EID_SSID,
760 			WLAN_EID_SUPP_RATES,
761 			WLAN_EID_EXT_SUPP_RATES,
762 			WLAN_EID_PWR_CAPABILITY,
763 			WLAN_EID_SUPPORTED_CHANNELS,
764 			WLAN_EID_RSN,
765 			WLAN_EID_QOS_CAPA,
766 			WLAN_EID_RRM_ENABLED_CAPABILITIES,
767 			WLAN_EID_MOBILITY_DOMAIN,
768 			WLAN_EID_FAST_BSS_TRANSITION,	/* reassoc only */
769 			WLAN_EID_RIC_DATA,		/* reassoc only */
770 			WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
771 		};
772 		static const u8 after_ric[] = {
773 			WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
774 			WLAN_EID_HT_CAPABILITY,
775 			WLAN_EID_BSS_COEX_2040,
776 			/* luckily this is almost always there */
777 			WLAN_EID_EXT_CAPABILITY,
778 			WLAN_EID_QOS_TRAFFIC_CAPA,
779 			WLAN_EID_TIM_BCAST_REQ,
780 			WLAN_EID_INTERWORKING,
781 			/* 60 GHz (Multi-band, DMG, MMS) can't happen */
782 			WLAN_EID_VHT_CAPABILITY,
783 			WLAN_EID_OPMODE_NOTIF,
784 		};
785 
786 		noffset = ieee80211_ie_split_ric(assoc_data->ie,
787 						 assoc_data->ie_len,
788 						 before_ht,
789 						 ARRAY_SIZE(before_ht),
790 						 after_ric,
791 						 ARRAY_SIZE(after_ric),
792 						 offset);
793 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
794 		offset = noffset;
795 	}
796 
797 	if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
798 			 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
799 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
800 
801 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
802 		ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
803 				    sband, chan, sdata->smps_mode);
804 
805 	/* if present, add any custom IEs that go before VHT */
806 	if (assoc_data->ie_len) {
807 		static const u8 before_vht[] = {
808 			/*
809 			 * no need to list the ones split off before HT
810 			 * or generated here
811 			 */
812 			WLAN_EID_BSS_COEX_2040,
813 			WLAN_EID_EXT_CAPABILITY,
814 			WLAN_EID_QOS_TRAFFIC_CAPA,
815 			WLAN_EID_TIM_BCAST_REQ,
816 			WLAN_EID_INTERWORKING,
817 			/* 60 GHz (Multi-band, DMG, MMS) can't happen */
818 		};
819 
820 		/* RIC already taken above, so no need to handle here anymore */
821 		noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
822 					     before_vht, ARRAY_SIZE(before_vht),
823 					     offset);
824 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
825 		offset = noffset;
826 	}
827 
828 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
829 		ieee80211_add_vht_ie(sdata, skb, sband,
830 				     &assoc_data->ap_vht_cap);
831 
832 	/* if present, add any custom non-vendor IEs that go after HT */
833 	if (assoc_data->ie_len) {
834 		noffset = ieee80211_ie_split_vendor(assoc_data->ie,
835 						    assoc_data->ie_len,
836 						    offset);
837 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
838 		offset = noffset;
839 	}
840 
841 	if (assoc_data->wmm) {
842 		if (assoc_data->uapsd) {
843 			qos_info = ifmgd->uapsd_queues;
844 			qos_info |= (ifmgd->uapsd_max_sp_len <<
845 				     IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
846 		} else {
847 			qos_info = 0;
848 		}
849 
850 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
851 	}
852 
853 	/* add any remaining custom (i.e. vendor specific here) IEs */
854 	if (assoc_data->ie_len) {
855 		noffset = assoc_data->ie_len;
856 		skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
857 	}
858 
859 	if (assoc_data->fils_kek_len &&
860 	    fils_encrypt_assoc_req(skb, assoc_data) < 0) {
861 		dev_kfree_skb(skb);
862 		return;
863 	}
864 
865 	drv_mgd_prepare_tx(local, sdata);
866 
867 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
868 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
869 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
870 						IEEE80211_TX_INTFL_MLME_CONN_TX;
871 	ieee80211_tx_skb(sdata, skb);
872 }
873 
874 void ieee80211_send_pspoll(struct ieee80211_local *local,
875 			   struct ieee80211_sub_if_data *sdata)
876 {
877 	struct ieee80211_pspoll *pspoll;
878 	struct sk_buff *skb;
879 
880 	skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
881 	if (!skb)
882 		return;
883 
884 	pspoll = (struct ieee80211_pspoll *) skb->data;
885 	pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
886 
887 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
888 	ieee80211_tx_skb(sdata, skb);
889 }
890 
891 void ieee80211_send_nullfunc(struct ieee80211_local *local,
892 			     struct ieee80211_sub_if_data *sdata,
893 			     bool powersave)
894 {
895 	struct sk_buff *skb;
896 	struct ieee80211_hdr_3addr *nullfunc;
897 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
898 
899 	skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, true);
900 	if (!skb)
901 		return;
902 
903 	nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
904 	if (powersave)
905 		nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
906 
907 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
908 					IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
909 
910 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
911 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
912 
913 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
914 		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
915 
916 	ieee80211_tx_skb(sdata, skb);
917 }
918 
919 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
920 					  struct ieee80211_sub_if_data *sdata)
921 {
922 	struct sk_buff *skb;
923 	struct ieee80211_hdr *nullfunc;
924 	__le16 fc;
925 
926 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
927 		return;
928 
929 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
930 	if (!skb)
931 		return;
932 
933 	skb_reserve(skb, local->hw.extra_tx_headroom);
934 
935 	nullfunc = skb_put_zero(skb, 30);
936 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
937 			 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
938 	nullfunc->frame_control = fc;
939 	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
940 	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
941 	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
942 	memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
943 
944 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
945 	ieee80211_tx_skb(sdata, skb);
946 }
947 
948 /* spectrum management related things */
949 static void ieee80211_chswitch_work(struct work_struct *work)
950 {
951 	struct ieee80211_sub_if_data *sdata =
952 		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
953 	struct ieee80211_local *local = sdata->local;
954 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
955 	int ret;
956 
957 	if (!ieee80211_sdata_running(sdata))
958 		return;
959 
960 	sdata_lock(sdata);
961 	mutex_lock(&local->mtx);
962 	mutex_lock(&local->chanctx_mtx);
963 
964 	if (!ifmgd->associated)
965 		goto out;
966 
967 	if (!sdata->vif.csa_active)
968 		goto out;
969 
970 	/*
971 	 * using reservation isn't immediate as it may be deferred until later
972 	 * with multi-vif. once reservation is complete it will re-schedule the
973 	 * work with no reserved_chanctx so verify chandef to check if it
974 	 * completed successfully
975 	 */
976 
977 	if (sdata->reserved_chanctx) {
978 		/*
979 		 * with multi-vif csa driver may call ieee80211_csa_finish()
980 		 * many times while waiting for other interfaces to use their
981 		 * reservations
982 		 */
983 		if (sdata->reserved_ready)
984 			goto out;
985 
986 		ret = ieee80211_vif_use_reserved_context(sdata);
987 		if (ret) {
988 			sdata_info(sdata,
989 				   "failed to use reserved channel context, disconnecting (err=%d)\n",
990 				   ret);
991 			ieee80211_queue_work(&sdata->local->hw,
992 					     &ifmgd->csa_connection_drop_work);
993 			goto out;
994 		}
995 
996 		goto out;
997 	}
998 
999 	if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1000 					&sdata->csa_chandef)) {
1001 		sdata_info(sdata,
1002 			   "failed to finalize channel switch, disconnecting\n");
1003 		ieee80211_queue_work(&sdata->local->hw,
1004 				     &ifmgd->csa_connection_drop_work);
1005 		goto out;
1006 	}
1007 
1008 	/* XXX: shouldn't really modify cfg80211-owned data! */
1009 	ifmgd->associated->channel = sdata->csa_chandef.chan;
1010 
1011 	ifmgd->csa_waiting_bcn = true;
1012 
1013 	ieee80211_sta_reset_beacon_monitor(sdata);
1014 	ieee80211_sta_reset_conn_monitor(sdata);
1015 
1016 out:
1017 	mutex_unlock(&local->chanctx_mtx);
1018 	mutex_unlock(&local->mtx);
1019 	sdata_unlock(sdata);
1020 }
1021 
1022 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1023 {
1024 	struct ieee80211_local *local = sdata->local;
1025 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1026 	int ret;
1027 
1028 	sdata_assert_lock(sdata);
1029 
1030 	WARN_ON(!sdata->vif.csa_active);
1031 
1032 	if (sdata->csa_block_tx) {
1033 		ieee80211_wake_vif_queues(local, sdata,
1034 					  IEEE80211_QUEUE_STOP_REASON_CSA);
1035 		sdata->csa_block_tx = false;
1036 	}
1037 
1038 	sdata->vif.csa_active = false;
1039 	ifmgd->csa_waiting_bcn = false;
1040 
1041 	ret = drv_post_channel_switch(sdata);
1042 	if (ret) {
1043 		sdata_info(sdata,
1044 			   "driver post channel switch failed, disconnecting\n");
1045 		ieee80211_queue_work(&local->hw,
1046 				     &ifmgd->csa_connection_drop_work);
1047 		return;
1048 	}
1049 
1050 	cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1051 }
1052 
1053 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1054 {
1055 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1056 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1057 
1058 	trace_api_chswitch_done(sdata, success);
1059 	if (!success) {
1060 		sdata_info(sdata,
1061 			   "driver channel switch failed, disconnecting\n");
1062 		ieee80211_queue_work(&sdata->local->hw,
1063 				     &ifmgd->csa_connection_drop_work);
1064 	} else {
1065 		ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1066 	}
1067 }
1068 EXPORT_SYMBOL(ieee80211_chswitch_done);
1069 
1070 static void ieee80211_chswitch_timer(struct timer_list *t)
1071 {
1072 	struct ieee80211_sub_if_data *sdata =
1073 		from_timer(sdata, t, u.mgd.chswitch_timer);
1074 
1075 	ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1076 }
1077 
1078 static void
1079 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1080 				 u64 timestamp, u32 device_timestamp,
1081 				 struct ieee802_11_elems *elems,
1082 				 bool beacon)
1083 {
1084 	struct ieee80211_local *local = sdata->local;
1085 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1086 	struct cfg80211_bss *cbss = ifmgd->associated;
1087 	struct ieee80211_chanctx_conf *conf;
1088 	struct ieee80211_chanctx *chanctx;
1089 	enum nl80211_band current_band;
1090 	struct ieee80211_csa_ie csa_ie;
1091 	struct ieee80211_channel_switch ch_switch;
1092 	int res;
1093 
1094 	sdata_assert_lock(sdata);
1095 
1096 	if (!cbss)
1097 		return;
1098 
1099 	if (local->scanning)
1100 		return;
1101 
1102 	/* disregard subsequent announcements if we are already processing */
1103 	if (sdata->vif.csa_active)
1104 		return;
1105 
1106 	current_band = cbss->channel->band;
1107 	res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1108 					   ifmgd->flags,
1109 					   ifmgd->associated->bssid, &csa_ie);
1110 	if (res	< 0)
1111 		ieee80211_queue_work(&local->hw,
1112 				     &ifmgd->csa_connection_drop_work);
1113 	if (res)
1114 		return;
1115 
1116 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1117 				     IEEE80211_CHAN_DISABLED)) {
1118 		sdata_info(sdata,
1119 			   "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1120 			   ifmgd->associated->bssid,
1121 			   csa_ie.chandef.chan->center_freq,
1122 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1123 			   csa_ie.chandef.center_freq2);
1124 		ieee80211_queue_work(&local->hw,
1125 				     &ifmgd->csa_connection_drop_work);
1126 		return;
1127 	}
1128 
1129 	if (cfg80211_chandef_identical(&csa_ie.chandef,
1130 				       &sdata->vif.bss_conf.chandef)) {
1131 		if (ifmgd->csa_ignored_same_chan)
1132 			return;
1133 		sdata_info(sdata,
1134 			   "AP %pM tries to chanswitch to same channel, ignore\n",
1135 			   ifmgd->associated->bssid);
1136 		ifmgd->csa_ignored_same_chan = true;
1137 		return;
1138 	}
1139 
1140 	/*
1141 	 * Drop all TDLS peers - either we disconnect or move to a different
1142 	 * channel from this point on. There's no telling what our peer will do.
1143 	 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1144 	 * have an incompatible wider chandef.
1145 	 */
1146 	ieee80211_teardown_tdls_peers(sdata);
1147 
1148 	mutex_lock(&local->mtx);
1149 	mutex_lock(&local->chanctx_mtx);
1150 	conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1151 					 lockdep_is_held(&local->chanctx_mtx));
1152 	if (!conf) {
1153 		sdata_info(sdata,
1154 			   "no channel context assigned to vif?, disconnecting\n");
1155 		goto drop_connection;
1156 	}
1157 
1158 	chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1159 
1160 	if (local->use_chanctx &&
1161 	    !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1162 		sdata_info(sdata,
1163 			   "driver doesn't support chan-switch with channel contexts\n");
1164 		goto drop_connection;
1165 	}
1166 
1167 	ch_switch.timestamp = timestamp;
1168 	ch_switch.device_timestamp = device_timestamp;
1169 	ch_switch.block_tx = csa_ie.mode;
1170 	ch_switch.chandef = csa_ie.chandef;
1171 	ch_switch.count = csa_ie.count;
1172 
1173 	if (drv_pre_channel_switch(sdata, &ch_switch)) {
1174 		sdata_info(sdata,
1175 			   "preparing for channel switch failed, disconnecting\n");
1176 		goto drop_connection;
1177 	}
1178 
1179 	res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1180 					    chanctx->mode, false);
1181 	if (res) {
1182 		sdata_info(sdata,
1183 			   "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1184 			   res);
1185 		goto drop_connection;
1186 	}
1187 	mutex_unlock(&local->chanctx_mtx);
1188 
1189 	sdata->vif.csa_active = true;
1190 	sdata->csa_chandef = csa_ie.chandef;
1191 	sdata->csa_block_tx = csa_ie.mode;
1192 	ifmgd->csa_ignored_same_chan = false;
1193 
1194 	if (sdata->csa_block_tx)
1195 		ieee80211_stop_vif_queues(local, sdata,
1196 					  IEEE80211_QUEUE_STOP_REASON_CSA);
1197 	mutex_unlock(&local->mtx);
1198 
1199 	cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1200 					  csa_ie.count);
1201 
1202 	if (local->ops->channel_switch) {
1203 		/* use driver's channel switch callback */
1204 		drv_channel_switch(local, sdata, &ch_switch);
1205 		return;
1206 	}
1207 
1208 	/* channel switch handled in software */
1209 	if (csa_ie.count <= 1)
1210 		ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1211 	else
1212 		mod_timer(&ifmgd->chswitch_timer,
1213 			  TU_TO_EXP_TIME((csa_ie.count - 1) *
1214 					 cbss->beacon_interval));
1215 	return;
1216  drop_connection:
1217 	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1218 	mutex_unlock(&local->chanctx_mtx);
1219 	mutex_unlock(&local->mtx);
1220 }
1221 
1222 static bool
1223 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1224 				 struct ieee80211_channel *channel,
1225 				 const u8 *country_ie, u8 country_ie_len,
1226 				 const u8 *pwr_constr_elem,
1227 				 int *chan_pwr, int *pwr_reduction)
1228 {
1229 	struct ieee80211_country_ie_triplet *triplet;
1230 	int chan = ieee80211_frequency_to_channel(channel->center_freq);
1231 	int i, chan_increment;
1232 	bool have_chan_pwr = false;
1233 
1234 	/* Invalid IE */
1235 	if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1236 		return false;
1237 
1238 	triplet = (void *)(country_ie + 3);
1239 	country_ie_len -= 3;
1240 
1241 	switch (channel->band) {
1242 	default:
1243 		WARN_ON_ONCE(1);
1244 		/* fall through */
1245 	case NL80211_BAND_2GHZ:
1246 	case NL80211_BAND_60GHZ:
1247 		chan_increment = 1;
1248 		break;
1249 	case NL80211_BAND_5GHZ:
1250 		chan_increment = 4;
1251 		break;
1252 	}
1253 
1254 	/* find channel */
1255 	while (country_ie_len >= 3) {
1256 		u8 first_channel = triplet->chans.first_channel;
1257 
1258 		if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1259 			goto next;
1260 
1261 		for (i = 0; i < triplet->chans.num_channels; i++) {
1262 			if (first_channel + i * chan_increment == chan) {
1263 				have_chan_pwr = true;
1264 				*chan_pwr = triplet->chans.max_power;
1265 				break;
1266 			}
1267 		}
1268 		if (have_chan_pwr)
1269 			break;
1270 
1271  next:
1272 		triplet++;
1273 		country_ie_len -= 3;
1274 	}
1275 
1276 	if (have_chan_pwr && pwr_constr_elem)
1277 		*pwr_reduction = *pwr_constr_elem;
1278 	else
1279 		*pwr_reduction = 0;
1280 
1281 	return have_chan_pwr;
1282 }
1283 
1284 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1285 				      struct ieee80211_channel *channel,
1286 				      const u8 *cisco_dtpc_ie,
1287 				      int *pwr_level)
1288 {
1289 	/* From practical testing, the first data byte of the DTPC element
1290 	 * seems to contain the requested dBm level, and the CLI on Cisco
1291 	 * APs clearly state the range is -127 to 127 dBm, which indicates
1292 	 * a signed byte, although it seemingly never actually goes negative.
1293 	 * The other byte seems to always be zero.
1294 	 */
1295 	*pwr_level = (__s8)cisco_dtpc_ie[4];
1296 }
1297 
1298 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1299 				       struct ieee80211_channel *channel,
1300 				       struct ieee80211_mgmt *mgmt,
1301 				       const u8 *country_ie, u8 country_ie_len,
1302 				       const u8 *pwr_constr_ie,
1303 				       const u8 *cisco_dtpc_ie)
1304 {
1305 	bool has_80211h_pwr = false, has_cisco_pwr = false;
1306 	int chan_pwr = 0, pwr_reduction_80211h = 0;
1307 	int pwr_level_cisco, pwr_level_80211h;
1308 	int new_ap_level;
1309 	__le16 capab = mgmt->u.probe_resp.capab_info;
1310 
1311 	if (country_ie &&
1312 	    (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1313 	     capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1314 		has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1315 			sdata, channel, country_ie, country_ie_len,
1316 			pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1317 		pwr_level_80211h =
1318 			max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1319 	}
1320 
1321 	if (cisco_dtpc_ie) {
1322 		ieee80211_find_cisco_dtpc(
1323 			sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1324 		has_cisco_pwr = true;
1325 	}
1326 
1327 	if (!has_80211h_pwr && !has_cisco_pwr)
1328 		return 0;
1329 
1330 	/* If we have both 802.11h and Cisco DTPC, apply both limits
1331 	 * by picking the smallest of the two power levels advertised.
1332 	 */
1333 	if (has_80211h_pwr &&
1334 	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1335 		new_ap_level = pwr_level_80211h;
1336 
1337 		if (sdata->ap_power_level == new_ap_level)
1338 			return 0;
1339 
1340 		sdata_dbg(sdata,
1341 			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1342 			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1343 			  sdata->u.mgd.bssid);
1344 	} else {  /* has_cisco_pwr is always true here. */
1345 		new_ap_level = pwr_level_cisco;
1346 
1347 		if (sdata->ap_power_level == new_ap_level)
1348 			return 0;
1349 
1350 		sdata_dbg(sdata,
1351 			  "Limiting TX power to %d dBm as advertised by %pM\n",
1352 			  pwr_level_cisco, sdata->u.mgd.bssid);
1353 	}
1354 
1355 	sdata->ap_power_level = new_ap_level;
1356 	if (__ieee80211_recalc_txpower(sdata))
1357 		return BSS_CHANGED_TXPOWER;
1358 	return 0;
1359 }
1360 
1361 /* powersave */
1362 static void ieee80211_enable_ps(struct ieee80211_local *local,
1363 				struct ieee80211_sub_if_data *sdata)
1364 {
1365 	struct ieee80211_conf *conf = &local->hw.conf;
1366 
1367 	/*
1368 	 * If we are scanning right now then the parameters will
1369 	 * take effect when scan finishes.
1370 	 */
1371 	if (local->scanning)
1372 		return;
1373 
1374 	if (conf->dynamic_ps_timeout > 0 &&
1375 	    !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1376 		mod_timer(&local->dynamic_ps_timer, jiffies +
1377 			  msecs_to_jiffies(conf->dynamic_ps_timeout));
1378 	} else {
1379 		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1380 			ieee80211_send_nullfunc(local, sdata, true);
1381 
1382 		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1383 		    ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1384 			return;
1385 
1386 		conf->flags |= IEEE80211_CONF_PS;
1387 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1388 	}
1389 }
1390 
1391 static void ieee80211_change_ps(struct ieee80211_local *local)
1392 {
1393 	struct ieee80211_conf *conf = &local->hw.conf;
1394 
1395 	if (local->ps_sdata) {
1396 		ieee80211_enable_ps(local, local->ps_sdata);
1397 	} else if (conf->flags & IEEE80211_CONF_PS) {
1398 		conf->flags &= ~IEEE80211_CONF_PS;
1399 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1400 		del_timer_sync(&local->dynamic_ps_timer);
1401 		cancel_work_sync(&local->dynamic_ps_enable_work);
1402 	}
1403 }
1404 
1405 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1406 {
1407 	struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1408 	struct sta_info *sta = NULL;
1409 	bool authorized = false;
1410 
1411 	if (!mgd->powersave)
1412 		return false;
1413 
1414 	if (mgd->broken_ap)
1415 		return false;
1416 
1417 	if (!mgd->associated)
1418 		return false;
1419 
1420 	if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1421 		return false;
1422 
1423 	if (!mgd->have_beacon)
1424 		return false;
1425 
1426 	rcu_read_lock();
1427 	sta = sta_info_get(sdata, mgd->bssid);
1428 	if (sta)
1429 		authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1430 	rcu_read_unlock();
1431 
1432 	return authorized;
1433 }
1434 
1435 /* need to hold RTNL or interface lock */
1436 void ieee80211_recalc_ps(struct ieee80211_local *local)
1437 {
1438 	struct ieee80211_sub_if_data *sdata, *found = NULL;
1439 	int count = 0;
1440 	int timeout;
1441 
1442 	if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1443 		local->ps_sdata = NULL;
1444 		return;
1445 	}
1446 
1447 	list_for_each_entry(sdata, &local->interfaces, list) {
1448 		if (!ieee80211_sdata_running(sdata))
1449 			continue;
1450 		if (sdata->vif.type == NL80211_IFTYPE_AP) {
1451 			/* If an AP vif is found, then disable PS
1452 			 * by setting the count to zero thereby setting
1453 			 * ps_sdata to NULL.
1454 			 */
1455 			count = 0;
1456 			break;
1457 		}
1458 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
1459 			continue;
1460 		found = sdata;
1461 		count++;
1462 	}
1463 
1464 	if (count == 1 && ieee80211_powersave_allowed(found)) {
1465 		u8 dtimper = found->u.mgd.dtim_period;
1466 
1467 		timeout = local->dynamic_ps_forced_timeout;
1468 		if (timeout < 0)
1469 			timeout = 100;
1470 		local->hw.conf.dynamic_ps_timeout = timeout;
1471 
1472 		/* If the TIM IE is invalid, pretend the value is 1 */
1473 		if (!dtimper)
1474 			dtimper = 1;
1475 
1476 		local->hw.conf.ps_dtim_period = dtimper;
1477 		local->ps_sdata = found;
1478 	} else {
1479 		local->ps_sdata = NULL;
1480 	}
1481 
1482 	ieee80211_change_ps(local);
1483 }
1484 
1485 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1486 {
1487 	bool ps_allowed = ieee80211_powersave_allowed(sdata);
1488 
1489 	if (sdata->vif.bss_conf.ps != ps_allowed) {
1490 		sdata->vif.bss_conf.ps = ps_allowed;
1491 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1492 	}
1493 }
1494 
1495 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1496 {
1497 	struct ieee80211_local *local =
1498 		container_of(work, struct ieee80211_local,
1499 			     dynamic_ps_disable_work);
1500 
1501 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1502 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1503 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1504 	}
1505 
1506 	ieee80211_wake_queues_by_reason(&local->hw,
1507 					IEEE80211_MAX_QUEUE_MAP,
1508 					IEEE80211_QUEUE_STOP_REASON_PS,
1509 					false);
1510 }
1511 
1512 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1513 {
1514 	struct ieee80211_local *local =
1515 		container_of(work, struct ieee80211_local,
1516 			     dynamic_ps_enable_work);
1517 	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1518 	struct ieee80211_if_managed *ifmgd;
1519 	unsigned long flags;
1520 	int q;
1521 
1522 	/* can only happen when PS was just disabled anyway */
1523 	if (!sdata)
1524 		return;
1525 
1526 	ifmgd = &sdata->u.mgd;
1527 
1528 	if (local->hw.conf.flags & IEEE80211_CONF_PS)
1529 		return;
1530 
1531 	if (local->hw.conf.dynamic_ps_timeout > 0) {
1532 		/* don't enter PS if TX frames are pending */
1533 		if (drv_tx_frames_pending(local)) {
1534 			mod_timer(&local->dynamic_ps_timer, jiffies +
1535 				  msecs_to_jiffies(
1536 				  local->hw.conf.dynamic_ps_timeout));
1537 			return;
1538 		}
1539 
1540 		/*
1541 		 * transmission can be stopped by others which leads to
1542 		 * dynamic_ps_timer expiry. Postpone the ps timer if it
1543 		 * is not the actual idle state.
1544 		 */
1545 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1546 		for (q = 0; q < local->hw.queues; q++) {
1547 			if (local->queue_stop_reasons[q]) {
1548 				spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1549 						       flags);
1550 				mod_timer(&local->dynamic_ps_timer, jiffies +
1551 					  msecs_to_jiffies(
1552 					  local->hw.conf.dynamic_ps_timeout));
1553 				return;
1554 			}
1555 		}
1556 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1557 	}
1558 
1559 	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1560 	    !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1561 		if (drv_tx_frames_pending(local)) {
1562 			mod_timer(&local->dynamic_ps_timer, jiffies +
1563 				  msecs_to_jiffies(
1564 				  local->hw.conf.dynamic_ps_timeout));
1565 		} else {
1566 			ieee80211_send_nullfunc(local, sdata, true);
1567 			/* Flush to get the tx status of nullfunc frame */
1568 			ieee80211_flush_queues(local, sdata, false);
1569 		}
1570 	}
1571 
1572 	if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1573 	      ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1574 	    (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1575 		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1576 		local->hw.conf.flags |= IEEE80211_CONF_PS;
1577 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1578 	}
1579 }
1580 
1581 void ieee80211_dynamic_ps_timer(struct timer_list *t)
1582 {
1583 	struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
1584 
1585 	ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1586 }
1587 
1588 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1589 {
1590 	struct delayed_work *delayed_work = to_delayed_work(work);
1591 	struct ieee80211_sub_if_data *sdata =
1592 		container_of(delayed_work, struct ieee80211_sub_if_data,
1593 			     dfs_cac_timer_work);
1594 	struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1595 
1596 	mutex_lock(&sdata->local->mtx);
1597 	if (sdata->wdev.cac_started) {
1598 		ieee80211_vif_release_channel(sdata);
1599 		cfg80211_cac_event(sdata->dev, &chandef,
1600 				   NL80211_RADAR_CAC_FINISHED,
1601 				   GFP_KERNEL);
1602 	}
1603 	mutex_unlock(&sdata->local->mtx);
1604 }
1605 
1606 static bool
1607 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1608 {
1609 	struct ieee80211_local *local = sdata->local;
1610 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1611 	bool ret = false;
1612 	int ac;
1613 
1614 	if (local->hw.queues < IEEE80211_NUM_ACS)
1615 		return false;
1616 
1617 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1618 		struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1619 		int non_acm_ac;
1620 		unsigned long now = jiffies;
1621 
1622 		if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1623 		    tx_tspec->admitted_time &&
1624 		    time_after(now, tx_tspec->time_slice_start + HZ)) {
1625 			tx_tspec->consumed_tx_time = 0;
1626 			tx_tspec->time_slice_start = now;
1627 
1628 			if (tx_tspec->downgraded)
1629 				tx_tspec->action =
1630 					TX_TSPEC_ACTION_STOP_DOWNGRADE;
1631 		}
1632 
1633 		switch (tx_tspec->action) {
1634 		case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1635 			/* take the original parameters */
1636 			if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1637 				sdata_err(sdata,
1638 					  "failed to set TX queue parameters for queue %d\n",
1639 					  ac);
1640 			tx_tspec->action = TX_TSPEC_ACTION_NONE;
1641 			tx_tspec->downgraded = false;
1642 			ret = true;
1643 			break;
1644 		case TX_TSPEC_ACTION_DOWNGRADE:
1645 			if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1646 				tx_tspec->action = TX_TSPEC_ACTION_NONE;
1647 				ret = true;
1648 				break;
1649 			}
1650 			/* downgrade next lower non-ACM AC */
1651 			for (non_acm_ac = ac + 1;
1652 			     non_acm_ac < IEEE80211_NUM_ACS;
1653 			     non_acm_ac++)
1654 				if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1655 					break;
1656 			/* Usually the loop will result in using BK even if it
1657 			 * requires admission control, but such a configuration
1658 			 * makes no sense and we have to transmit somehow - the
1659 			 * AC selection does the same thing.
1660 			 * If we started out trying to downgrade from BK, then
1661 			 * the extra condition here might be needed.
1662 			 */
1663 			if (non_acm_ac >= IEEE80211_NUM_ACS)
1664 				non_acm_ac = IEEE80211_AC_BK;
1665 			if (drv_conf_tx(local, sdata, ac,
1666 					&sdata->tx_conf[non_acm_ac]))
1667 				sdata_err(sdata,
1668 					  "failed to set TX queue parameters for queue %d\n",
1669 					  ac);
1670 			tx_tspec->action = TX_TSPEC_ACTION_NONE;
1671 			ret = true;
1672 			schedule_delayed_work(&ifmgd->tx_tspec_wk,
1673 				tx_tspec->time_slice_start + HZ - now + 1);
1674 			break;
1675 		case TX_TSPEC_ACTION_NONE:
1676 			/* nothing now */
1677 			break;
1678 		}
1679 	}
1680 
1681 	return ret;
1682 }
1683 
1684 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1685 {
1686 	if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1687 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1688 }
1689 
1690 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1691 {
1692 	struct ieee80211_sub_if_data *sdata;
1693 
1694 	sdata = container_of(work, struct ieee80211_sub_if_data,
1695 			     u.mgd.tx_tspec_wk.work);
1696 	ieee80211_sta_handle_tspec_ac_params(sdata);
1697 }
1698 
1699 /* MLME */
1700 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1701 				     struct ieee80211_sub_if_data *sdata,
1702 				     const u8 *wmm_param, size_t wmm_param_len)
1703 {
1704 	struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1705 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1706 	size_t left;
1707 	int count, ac;
1708 	const u8 *pos;
1709 	u8 uapsd_queues = 0;
1710 
1711 	if (!local->ops->conf_tx)
1712 		return false;
1713 
1714 	if (local->hw.queues < IEEE80211_NUM_ACS)
1715 		return false;
1716 
1717 	if (!wmm_param)
1718 		return false;
1719 
1720 	if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1721 		return false;
1722 
1723 	if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1724 		uapsd_queues = ifmgd->uapsd_queues;
1725 
1726 	count = wmm_param[6] & 0x0f;
1727 	if (count == ifmgd->wmm_last_param_set)
1728 		return false;
1729 	ifmgd->wmm_last_param_set = count;
1730 
1731 	pos = wmm_param + 8;
1732 	left = wmm_param_len - 8;
1733 
1734 	memset(&params, 0, sizeof(params));
1735 
1736 	sdata->wmm_acm = 0;
1737 	for (; left >= 4; left -= 4, pos += 4) {
1738 		int aci = (pos[0] >> 5) & 0x03;
1739 		int acm = (pos[0] >> 4) & 0x01;
1740 		bool uapsd = false;
1741 
1742 		switch (aci) {
1743 		case 1: /* AC_BK */
1744 			ac = IEEE80211_AC_BK;
1745 			if (acm)
1746 				sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1747 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1748 				uapsd = true;
1749 			break;
1750 		case 2: /* AC_VI */
1751 			ac = IEEE80211_AC_VI;
1752 			if (acm)
1753 				sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1754 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1755 				uapsd = true;
1756 			break;
1757 		case 3: /* AC_VO */
1758 			ac = IEEE80211_AC_VO;
1759 			if (acm)
1760 				sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1761 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1762 				uapsd = true;
1763 			break;
1764 		case 0: /* AC_BE */
1765 		default:
1766 			ac = IEEE80211_AC_BE;
1767 			if (acm)
1768 				sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1769 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1770 				uapsd = true;
1771 			break;
1772 		}
1773 
1774 		params[ac].aifs = pos[0] & 0x0f;
1775 
1776 		if (params[ac].aifs < 2) {
1777 			sdata_info(sdata,
1778 				   "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
1779 				   params[ac].aifs, aci);
1780 			params[ac].aifs = 2;
1781 		}
1782 		params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1783 		params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
1784 		params[ac].txop = get_unaligned_le16(pos + 2);
1785 		params[ac].acm = acm;
1786 		params[ac].uapsd = uapsd;
1787 
1788 		if (params[ac].cw_min > params[ac].cw_max) {
1789 			sdata_info(sdata,
1790 				   "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
1791 				   params[ac].cw_min, params[ac].cw_max, aci);
1792 			return false;
1793 		}
1794 	}
1795 
1796 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1797 		mlme_dbg(sdata,
1798 			 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1799 			 ac, params[ac].acm,
1800 			 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
1801 			 params[ac].txop, params[ac].uapsd,
1802 			 ifmgd->tx_tspec[ac].downgraded);
1803 		sdata->tx_conf[ac] = params[ac];
1804 		if (!ifmgd->tx_tspec[ac].downgraded &&
1805 		    drv_conf_tx(local, sdata, ac, &params[ac]))
1806 			sdata_err(sdata,
1807 				  "failed to set TX queue parameters for AC %d\n",
1808 				  ac);
1809 	}
1810 
1811 	/* enable WMM or activate new settings */
1812 	sdata->vif.bss_conf.qos = true;
1813 	return true;
1814 }
1815 
1816 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1817 {
1818 	lockdep_assert_held(&sdata->local->mtx);
1819 
1820 	sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1821 	ieee80211_run_deferred_scan(sdata->local);
1822 }
1823 
1824 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1825 {
1826 	mutex_lock(&sdata->local->mtx);
1827 	__ieee80211_stop_poll(sdata);
1828 	mutex_unlock(&sdata->local->mtx);
1829 }
1830 
1831 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1832 					   u16 capab, bool erp_valid, u8 erp)
1833 {
1834 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1835 	struct ieee80211_supported_band *sband;
1836 	u32 changed = 0;
1837 	bool use_protection;
1838 	bool use_short_preamble;
1839 	bool use_short_slot;
1840 
1841 	sband = ieee80211_get_sband(sdata);
1842 	if (!sband)
1843 		return changed;
1844 
1845 	if (erp_valid) {
1846 		use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1847 		use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1848 	} else {
1849 		use_protection = false;
1850 		use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1851 	}
1852 
1853 	use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1854 	if (sband->band == NL80211_BAND_5GHZ)
1855 		use_short_slot = true;
1856 
1857 	if (use_protection != bss_conf->use_cts_prot) {
1858 		bss_conf->use_cts_prot = use_protection;
1859 		changed |= BSS_CHANGED_ERP_CTS_PROT;
1860 	}
1861 
1862 	if (use_short_preamble != bss_conf->use_short_preamble) {
1863 		bss_conf->use_short_preamble = use_short_preamble;
1864 		changed |= BSS_CHANGED_ERP_PREAMBLE;
1865 	}
1866 
1867 	if (use_short_slot != bss_conf->use_short_slot) {
1868 		bss_conf->use_short_slot = use_short_slot;
1869 		changed |= BSS_CHANGED_ERP_SLOT;
1870 	}
1871 
1872 	return changed;
1873 }
1874 
1875 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1876 				     struct cfg80211_bss *cbss,
1877 				     u32 bss_info_changed)
1878 {
1879 	struct ieee80211_bss *bss = (void *)cbss->priv;
1880 	struct ieee80211_local *local = sdata->local;
1881 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1882 
1883 	bss_info_changed |= BSS_CHANGED_ASSOC;
1884 	bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1885 		bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1886 
1887 	sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1888 		beacon_loss_count * bss_conf->beacon_int));
1889 
1890 	sdata->u.mgd.associated = cbss;
1891 	memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1892 
1893 	ieee80211_check_rate_mask(sdata);
1894 
1895 	sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1896 
1897 	if (sdata->vif.p2p ||
1898 	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
1899 		const struct cfg80211_bss_ies *ies;
1900 
1901 		rcu_read_lock();
1902 		ies = rcu_dereference(cbss->ies);
1903 		if (ies) {
1904 			int ret;
1905 
1906 			ret = cfg80211_get_p2p_attr(
1907 					ies->data, ies->len,
1908 					IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1909 					(u8 *) &bss_conf->p2p_noa_attr,
1910 					sizeof(bss_conf->p2p_noa_attr));
1911 			if (ret >= 2) {
1912 				sdata->u.mgd.p2p_noa_index =
1913 					bss_conf->p2p_noa_attr.index;
1914 				bss_info_changed |= BSS_CHANGED_P2P_PS;
1915 			}
1916 		}
1917 		rcu_read_unlock();
1918 	}
1919 
1920 	/* just to be sure */
1921 	ieee80211_stop_poll(sdata);
1922 
1923 	ieee80211_led_assoc(local, 1);
1924 
1925 	if (sdata->u.mgd.have_beacon) {
1926 		/*
1927 		 * If the AP is buggy we may get here with no DTIM period
1928 		 * known, so assume it's 1 which is the only safe assumption
1929 		 * in that case, although if the TIM IE is broken powersave
1930 		 * probably just won't work at all.
1931 		 */
1932 		bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1933 		bss_conf->beacon_rate = bss->beacon_rate;
1934 		bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1935 	} else {
1936 		bss_conf->beacon_rate = NULL;
1937 		bss_conf->dtim_period = 0;
1938 	}
1939 
1940 	bss_conf->assoc = 1;
1941 
1942 	/* Tell the driver to monitor connection quality (if supported) */
1943 	if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1944 	    bss_conf->cqm_rssi_thold)
1945 		bss_info_changed |= BSS_CHANGED_CQM;
1946 
1947 	/* Enable ARP filtering */
1948 	if (bss_conf->arp_addr_cnt)
1949 		bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1950 
1951 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1952 
1953 	mutex_lock(&local->iflist_mtx);
1954 	ieee80211_recalc_ps(local);
1955 	mutex_unlock(&local->iflist_mtx);
1956 
1957 	ieee80211_recalc_smps(sdata);
1958 	ieee80211_recalc_ps_vif(sdata);
1959 
1960 	netif_carrier_on(sdata->dev);
1961 }
1962 
1963 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1964 				   u16 stype, u16 reason, bool tx,
1965 				   u8 *frame_buf)
1966 {
1967 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1968 	struct ieee80211_local *local = sdata->local;
1969 	u32 changed = 0;
1970 
1971 	sdata_assert_lock(sdata);
1972 
1973 	if (WARN_ON_ONCE(tx && !frame_buf))
1974 		return;
1975 
1976 	if (WARN_ON(!ifmgd->associated))
1977 		return;
1978 
1979 	ieee80211_stop_poll(sdata);
1980 
1981 	ifmgd->associated = NULL;
1982 	netif_carrier_off(sdata->dev);
1983 
1984 	/*
1985 	 * if we want to get out of ps before disassoc (why?) we have
1986 	 * to do it before sending disassoc, as otherwise the null-packet
1987 	 * won't be valid.
1988 	 */
1989 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1990 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1991 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1992 	}
1993 	local->ps_sdata = NULL;
1994 
1995 	/* disable per-vif ps */
1996 	ieee80211_recalc_ps_vif(sdata);
1997 
1998 	/* make sure ongoing transmission finishes */
1999 	synchronize_net();
2000 
2001 	/*
2002 	 * drop any frame before deauth/disassoc, this can be data or
2003 	 * management frame. Since we are disconnecting, we should not
2004 	 * insist sending these frames which can take time and delay
2005 	 * the disconnection and possible the roaming.
2006 	 */
2007 	if (tx)
2008 		ieee80211_flush_queues(local, sdata, true);
2009 
2010 	/* deauthenticate/disassociate now */
2011 	if (tx || frame_buf)
2012 		ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2013 					       reason, tx, frame_buf);
2014 
2015 	/* flush out frame - make sure the deauth was actually sent */
2016 	if (tx)
2017 		ieee80211_flush_queues(local, sdata, false);
2018 
2019 	/* clear bssid only after building the needed mgmt frames */
2020 	eth_zero_addr(ifmgd->bssid);
2021 
2022 	/* remove AP and TDLS peers */
2023 	sta_info_flush(sdata);
2024 
2025 	/* finally reset all BSS / config parameters */
2026 	changed |= ieee80211_reset_erp_info(sdata);
2027 
2028 	ieee80211_led_assoc(local, 0);
2029 	changed |= BSS_CHANGED_ASSOC;
2030 	sdata->vif.bss_conf.assoc = false;
2031 
2032 	ifmgd->p2p_noa_index = -1;
2033 	memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2034 	       sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2035 
2036 	/* on the next assoc, re-program HT/VHT parameters */
2037 	memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2038 	memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2039 	memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2040 	memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2041 
2042 	/* reset MU-MIMO ownership and group data */
2043 	memset(sdata->vif.bss_conf.mu_group.membership, 0,
2044 	       sizeof(sdata->vif.bss_conf.mu_group.membership));
2045 	memset(sdata->vif.bss_conf.mu_group.position, 0,
2046 	       sizeof(sdata->vif.bss_conf.mu_group.position));
2047 	changed |= BSS_CHANGED_MU_GROUPS;
2048 	sdata->vif.mu_mimo_owner = false;
2049 
2050 	sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2051 
2052 	del_timer_sync(&local->dynamic_ps_timer);
2053 	cancel_work_sync(&local->dynamic_ps_enable_work);
2054 
2055 	/* Disable ARP filtering */
2056 	if (sdata->vif.bss_conf.arp_addr_cnt)
2057 		changed |= BSS_CHANGED_ARP_FILTER;
2058 
2059 	sdata->vif.bss_conf.qos = false;
2060 	changed |= BSS_CHANGED_QOS;
2061 
2062 	/* The BSSID (not really interesting) and HT changed */
2063 	changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2064 	ieee80211_bss_info_change_notify(sdata, changed);
2065 
2066 	/* disassociated - set to defaults now */
2067 	ieee80211_set_wmm_default(sdata, false, false);
2068 
2069 	del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2070 	del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2071 	del_timer_sync(&sdata->u.mgd.timer);
2072 	del_timer_sync(&sdata->u.mgd.chswitch_timer);
2073 
2074 	sdata->vif.bss_conf.dtim_period = 0;
2075 	sdata->vif.bss_conf.beacon_rate = NULL;
2076 
2077 	ifmgd->have_beacon = false;
2078 
2079 	ifmgd->flags = 0;
2080 	mutex_lock(&local->mtx);
2081 	ieee80211_vif_release_channel(sdata);
2082 
2083 	sdata->vif.csa_active = false;
2084 	ifmgd->csa_waiting_bcn = false;
2085 	ifmgd->csa_ignored_same_chan = false;
2086 	if (sdata->csa_block_tx) {
2087 		ieee80211_wake_vif_queues(local, sdata,
2088 					  IEEE80211_QUEUE_STOP_REASON_CSA);
2089 		sdata->csa_block_tx = false;
2090 	}
2091 	mutex_unlock(&local->mtx);
2092 
2093 	/* existing TX TSPEC sessions no longer exist */
2094 	memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2095 	cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2096 
2097 	sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2098 }
2099 
2100 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2101 			     struct ieee80211_hdr *hdr)
2102 {
2103 	/*
2104 	 * We can postpone the mgd.timer whenever receiving unicast frames
2105 	 * from AP because we know that the connection is working both ways
2106 	 * at that time. But multicast frames (and hence also beacons) must
2107 	 * be ignored here, because we need to trigger the timer during
2108 	 * data idle periods for sending the periodic probe request to the
2109 	 * AP we're connected to.
2110 	 */
2111 	if (is_multicast_ether_addr(hdr->addr1))
2112 		return;
2113 
2114 	ieee80211_sta_reset_conn_monitor(sdata);
2115 }
2116 
2117 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2118 {
2119 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2120 	struct ieee80211_local *local = sdata->local;
2121 
2122 	mutex_lock(&local->mtx);
2123 	if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2124 		goto out;
2125 
2126 	__ieee80211_stop_poll(sdata);
2127 
2128 	mutex_lock(&local->iflist_mtx);
2129 	ieee80211_recalc_ps(local);
2130 	mutex_unlock(&local->iflist_mtx);
2131 
2132 	if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2133 		goto out;
2134 
2135 	/*
2136 	 * We've received a probe response, but are not sure whether
2137 	 * we have or will be receiving any beacons or data, so let's
2138 	 * schedule the timers again, just in case.
2139 	 */
2140 	ieee80211_sta_reset_beacon_monitor(sdata);
2141 
2142 	mod_timer(&ifmgd->conn_mon_timer,
2143 		  round_jiffies_up(jiffies +
2144 				   IEEE80211_CONNECTION_IDLE_TIME));
2145 out:
2146 	mutex_unlock(&local->mtx);
2147 }
2148 
2149 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2150 					   struct ieee80211_hdr *hdr,
2151 					   u16 tx_time)
2152 {
2153 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2154 	u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2155 	int ac = ieee80211_ac_from_tid(tid);
2156 	struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2157 	unsigned long now = jiffies;
2158 
2159 	if (likely(!tx_tspec->admitted_time))
2160 		return;
2161 
2162 	if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2163 		tx_tspec->consumed_tx_time = 0;
2164 		tx_tspec->time_slice_start = now;
2165 
2166 		if (tx_tspec->downgraded) {
2167 			tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2168 			schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2169 		}
2170 	}
2171 
2172 	if (tx_tspec->downgraded)
2173 		return;
2174 
2175 	tx_tspec->consumed_tx_time += tx_time;
2176 
2177 	if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2178 		tx_tspec->downgraded = true;
2179 		tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2180 		schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2181 	}
2182 }
2183 
2184 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2185 			     struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2186 {
2187 	ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2188 
2189 	if (!ieee80211_is_data(hdr->frame_control))
2190 	    return;
2191 
2192 	if (ieee80211_is_nullfunc(hdr->frame_control) &&
2193 	    sdata->u.mgd.probe_send_count > 0) {
2194 		if (ack)
2195 			ieee80211_sta_reset_conn_monitor(sdata);
2196 		else
2197 			sdata->u.mgd.nullfunc_failed = true;
2198 		ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2199 		return;
2200 	}
2201 
2202 	if (ack)
2203 		ieee80211_sta_reset_conn_monitor(sdata);
2204 }
2205 
2206 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2207 {
2208 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2209 	const u8 *ssid;
2210 	u8 *dst = ifmgd->associated->bssid;
2211 	u8 unicast_limit = max(1, max_probe_tries - 3);
2212 	struct sta_info *sta;
2213 
2214 	/*
2215 	 * Try sending broadcast probe requests for the last three
2216 	 * probe requests after the first ones failed since some
2217 	 * buggy APs only support broadcast probe requests.
2218 	 */
2219 	if (ifmgd->probe_send_count >= unicast_limit)
2220 		dst = NULL;
2221 
2222 	/*
2223 	 * When the hardware reports an accurate Tx ACK status, it's
2224 	 * better to send a nullfunc frame instead of a probe request,
2225 	 * as it will kick us off the AP quickly if we aren't associated
2226 	 * anymore. The timeout will be reset if the frame is ACKed by
2227 	 * the AP.
2228 	 */
2229 	ifmgd->probe_send_count++;
2230 
2231 	if (dst) {
2232 		mutex_lock(&sdata->local->sta_mtx);
2233 		sta = sta_info_get(sdata, dst);
2234 		if (!WARN_ON(!sta))
2235 			ieee80211_check_fast_rx(sta);
2236 		mutex_unlock(&sdata->local->sta_mtx);
2237 	}
2238 
2239 	if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2240 		ifmgd->nullfunc_failed = false;
2241 		ieee80211_send_nullfunc(sdata->local, sdata, false);
2242 	} else {
2243 		int ssid_len;
2244 
2245 		rcu_read_lock();
2246 		ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2247 		if (WARN_ON_ONCE(ssid == NULL))
2248 			ssid_len = 0;
2249 		else
2250 			ssid_len = ssid[1];
2251 
2252 		ieee80211_send_probe_req(sdata, sdata->vif.addr, dst,
2253 					 ssid + 2, ssid_len, NULL,
2254 					 0, (u32) -1, true, 0,
2255 					 ifmgd->associated->channel, false);
2256 		rcu_read_unlock();
2257 	}
2258 
2259 	ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2260 	run_again(sdata, ifmgd->probe_timeout);
2261 }
2262 
2263 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2264 				   bool beacon)
2265 {
2266 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2267 	bool already = false;
2268 
2269 	if (!ieee80211_sdata_running(sdata))
2270 		return;
2271 
2272 	sdata_lock(sdata);
2273 
2274 	if (!ifmgd->associated)
2275 		goto out;
2276 
2277 	mutex_lock(&sdata->local->mtx);
2278 
2279 	if (sdata->local->tmp_channel || sdata->local->scanning) {
2280 		mutex_unlock(&sdata->local->mtx);
2281 		goto out;
2282 	}
2283 
2284 	if (beacon) {
2285 		mlme_dbg_ratelimited(sdata,
2286 				     "detected beacon loss from AP (missed %d beacons) - probing\n",
2287 				     beacon_loss_count);
2288 
2289 		ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2290 	}
2291 
2292 	/*
2293 	 * The driver/our work has already reported this event or the
2294 	 * connection monitoring has kicked in and we have already sent
2295 	 * a probe request. Or maybe the AP died and the driver keeps
2296 	 * reporting until we disassociate...
2297 	 *
2298 	 * In either case we have to ignore the current call to this
2299 	 * function (except for setting the correct probe reason bit)
2300 	 * because otherwise we would reset the timer every time and
2301 	 * never check whether we received a probe response!
2302 	 */
2303 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2304 		already = true;
2305 
2306 	ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2307 
2308 	mutex_unlock(&sdata->local->mtx);
2309 
2310 	if (already)
2311 		goto out;
2312 
2313 	mutex_lock(&sdata->local->iflist_mtx);
2314 	ieee80211_recalc_ps(sdata->local);
2315 	mutex_unlock(&sdata->local->iflist_mtx);
2316 
2317 	ifmgd->probe_send_count = 0;
2318 	ieee80211_mgd_probe_ap_send(sdata);
2319  out:
2320 	sdata_unlock(sdata);
2321 }
2322 
2323 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2324 					  struct ieee80211_vif *vif)
2325 {
2326 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2327 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2328 	struct cfg80211_bss *cbss;
2329 	struct sk_buff *skb;
2330 	const u8 *ssid;
2331 	int ssid_len;
2332 
2333 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2334 		return NULL;
2335 
2336 	sdata_assert_lock(sdata);
2337 
2338 	if (ifmgd->associated)
2339 		cbss = ifmgd->associated;
2340 	else if (ifmgd->auth_data)
2341 		cbss = ifmgd->auth_data->bss;
2342 	else if (ifmgd->assoc_data)
2343 		cbss = ifmgd->assoc_data->bss;
2344 	else
2345 		return NULL;
2346 
2347 	rcu_read_lock();
2348 	ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2349 	if (WARN_ON_ONCE(ssid == NULL))
2350 		ssid_len = 0;
2351 	else
2352 		ssid_len = ssid[1];
2353 
2354 	skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2355 					(u32) -1, cbss->channel,
2356 					ssid + 2, ssid_len,
2357 					NULL, 0, true);
2358 	rcu_read_unlock();
2359 
2360 	return skb;
2361 }
2362 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2363 
2364 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2365 					const u8 *buf, size_t len, bool tx,
2366 					u16 reason)
2367 {
2368 	struct ieee80211_event event = {
2369 		.type = MLME_EVENT,
2370 		.u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2371 		.u.mlme.reason = reason,
2372 	};
2373 
2374 	if (tx)
2375 		cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2376 	else
2377 		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2378 
2379 	drv_event_callback(sdata->local, sdata, &event);
2380 }
2381 
2382 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2383 {
2384 	struct ieee80211_local *local = sdata->local;
2385 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2386 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2387 
2388 	sdata_lock(sdata);
2389 	if (!ifmgd->associated) {
2390 		sdata_unlock(sdata);
2391 		return;
2392 	}
2393 
2394 	/* AP is probably out of range (or not reachable for another reason) so
2395 	 * remove the bss struct for that AP.
2396 	 */
2397 	cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated);
2398 
2399 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2400 			       WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2401 			       true, frame_buf);
2402 	mutex_lock(&local->mtx);
2403 	sdata->vif.csa_active = false;
2404 	ifmgd->csa_waiting_bcn = false;
2405 	if (sdata->csa_block_tx) {
2406 		ieee80211_wake_vif_queues(local, sdata,
2407 					  IEEE80211_QUEUE_STOP_REASON_CSA);
2408 		sdata->csa_block_tx = false;
2409 	}
2410 	mutex_unlock(&local->mtx);
2411 
2412 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
2413 				    WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2414 
2415 	sdata_unlock(sdata);
2416 }
2417 
2418 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2419 {
2420 	struct ieee80211_sub_if_data *sdata =
2421 		container_of(work, struct ieee80211_sub_if_data,
2422 			     u.mgd.beacon_connection_loss_work);
2423 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2424 
2425 	if (ifmgd->associated)
2426 		ifmgd->beacon_loss_count++;
2427 
2428 	if (ifmgd->connection_loss) {
2429 		sdata_info(sdata, "Connection to AP %pM lost\n",
2430 			   ifmgd->bssid);
2431 		__ieee80211_disconnect(sdata);
2432 	} else {
2433 		ieee80211_mgd_probe_ap(sdata, true);
2434 	}
2435 }
2436 
2437 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2438 {
2439 	struct ieee80211_sub_if_data *sdata =
2440 		container_of(work, struct ieee80211_sub_if_data,
2441 			     u.mgd.csa_connection_drop_work);
2442 
2443 	__ieee80211_disconnect(sdata);
2444 }
2445 
2446 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2447 {
2448 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2449 	struct ieee80211_hw *hw = &sdata->local->hw;
2450 
2451 	trace_api_beacon_loss(sdata);
2452 
2453 	sdata->u.mgd.connection_loss = false;
2454 	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2455 }
2456 EXPORT_SYMBOL(ieee80211_beacon_loss);
2457 
2458 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2459 {
2460 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2461 	struct ieee80211_hw *hw = &sdata->local->hw;
2462 
2463 	trace_api_connection_loss(sdata);
2464 
2465 	sdata->u.mgd.connection_loss = true;
2466 	ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2467 }
2468 EXPORT_SYMBOL(ieee80211_connection_loss);
2469 
2470 
2471 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2472 					bool assoc)
2473 {
2474 	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2475 
2476 	sdata_assert_lock(sdata);
2477 
2478 	if (!assoc) {
2479 		/*
2480 		 * we are not authenticated yet, the only timer that could be
2481 		 * running is the timeout for the authentication response which
2482 		 * which is not relevant anymore.
2483 		 */
2484 		del_timer_sync(&sdata->u.mgd.timer);
2485 		sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2486 
2487 		eth_zero_addr(sdata->u.mgd.bssid);
2488 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2489 		sdata->u.mgd.flags = 0;
2490 		mutex_lock(&sdata->local->mtx);
2491 		ieee80211_vif_release_channel(sdata);
2492 		mutex_unlock(&sdata->local->mtx);
2493 	}
2494 
2495 	cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2496 	kfree(auth_data);
2497 	sdata->u.mgd.auth_data = NULL;
2498 }
2499 
2500 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2501 					 bool assoc, bool abandon)
2502 {
2503 	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2504 
2505 	sdata_assert_lock(sdata);
2506 
2507 	if (!assoc) {
2508 		/*
2509 		 * we are not associated yet, the only timer that could be
2510 		 * running is the timeout for the association response which
2511 		 * which is not relevant anymore.
2512 		 */
2513 		del_timer_sync(&sdata->u.mgd.timer);
2514 		sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2515 
2516 		eth_zero_addr(sdata->u.mgd.bssid);
2517 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2518 		sdata->u.mgd.flags = 0;
2519 		sdata->vif.mu_mimo_owner = false;
2520 
2521 		mutex_lock(&sdata->local->mtx);
2522 		ieee80211_vif_release_channel(sdata);
2523 		mutex_unlock(&sdata->local->mtx);
2524 
2525 		if (abandon)
2526 			cfg80211_abandon_assoc(sdata->dev, assoc_data->bss);
2527 	}
2528 
2529 	kfree(assoc_data);
2530 	sdata->u.mgd.assoc_data = NULL;
2531 }
2532 
2533 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2534 				     struct ieee80211_mgmt *mgmt, size_t len)
2535 {
2536 	struct ieee80211_local *local = sdata->local;
2537 	struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2538 	u8 *pos;
2539 	struct ieee802_11_elems elems;
2540 	u32 tx_flags = 0;
2541 
2542 	pos = mgmt->u.auth.variable;
2543 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2544 	if (!elems.challenge)
2545 		return;
2546 	auth_data->expected_transaction = 4;
2547 	drv_mgd_prepare_tx(sdata->local, sdata);
2548 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2549 		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2550 			   IEEE80211_TX_INTFL_MLME_CONN_TX;
2551 	ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2552 			    elems.challenge - 2, elems.challenge_len + 2,
2553 			    auth_data->bss->bssid, auth_data->bss->bssid,
2554 			    auth_data->key, auth_data->key_len,
2555 			    auth_data->key_idx, tx_flags);
2556 }
2557 
2558 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2559 				   struct ieee80211_mgmt *mgmt, size_t len)
2560 {
2561 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2562 	u8 bssid[ETH_ALEN];
2563 	u16 auth_alg, auth_transaction, status_code;
2564 	struct sta_info *sta;
2565 	struct ieee80211_event event = {
2566 		.type = MLME_EVENT,
2567 		.u.mlme.data = AUTH_EVENT,
2568 	};
2569 
2570 	sdata_assert_lock(sdata);
2571 
2572 	if (len < 24 + 6)
2573 		return;
2574 
2575 	if (!ifmgd->auth_data || ifmgd->auth_data->done)
2576 		return;
2577 
2578 	memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2579 
2580 	if (!ether_addr_equal(bssid, mgmt->bssid))
2581 		return;
2582 
2583 	auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2584 	auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2585 	status_code = le16_to_cpu(mgmt->u.auth.status_code);
2586 
2587 	if (auth_alg != ifmgd->auth_data->algorithm ||
2588 	    auth_transaction != ifmgd->auth_data->expected_transaction) {
2589 		sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2590 			   mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2591 			   auth_transaction,
2592 			   ifmgd->auth_data->expected_transaction);
2593 		return;
2594 	}
2595 
2596 	if (status_code != WLAN_STATUS_SUCCESS) {
2597 		sdata_info(sdata, "%pM denied authentication (status %d)\n",
2598 			   mgmt->sa, status_code);
2599 		ieee80211_destroy_auth_data(sdata, false);
2600 		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2601 		event.u.mlme.status = MLME_DENIED;
2602 		event.u.mlme.reason = status_code;
2603 		drv_event_callback(sdata->local, sdata, &event);
2604 		return;
2605 	}
2606 
2607 	switch (ifmgd->auth_data->algorithm) {
2608 	case WLAN_AUTH_OPEN:
2609 	case WLAN_AUTH_LEAP:
2610 	case WLAN_AUTH_FT:
2611 	case WLAN_AUTH_SAE:
2612 	case WLAN_AUTH_FILS_SK:
2613 	case WLAN_AUTH_FILS_SK_PFS:
2614 	case WLAN_AUTH_FILS_PK:
2615 		break;
2616 	case WLAN_AUTH_SHARED_KEY:
2617 		if (ifmgd->auth_data->expected_transaction != 4) {
2618 			ieee80211_auth_challenge(sdata, mgmt, len);
2619 			/* need another frame */
2620 			return;
2621 		}
2622 		break;
2623 	default:
2624 		WARN_ONCE(1, "invalid auth alg %d",
2625 			  ifmgd->auth_data->algorithm);
2626 		return;
2627 	}
2628 
2629 	event.u.mlme.status = MLME_SUCCESS;
2630 	drv_event_callback(sdata->local, sdata, &event);
2631 	sdata_info(sdata, "authenticated\n");
2632 	ifmgd->auth_data->done = true;
2633 	ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2634 	ifmgd->auth_data->timeout_started = true;
2635 	run_again(sdata, ifmgd->auth_data->timeout);
2636 
2637 	if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2638 	    ifmgd->auth_data->expected_transaction != 2) {
2639 		/*
2640 		 * Report auth frame to user space for processing since another
2641 		 * round of Authentication frames is still needed.
2642 		 */
2643 		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2644 		return;
2645 	}
2646 
2647 	/* move station state to auth */
2648 	mutex_lock(&sdata->local->sta_mtx);
2649 	sta = sta_info_get(sdata, bssid);
2650 	if (!sta) {
2651 		WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2652 		goto out_err;
2653 	}
2654 	if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2655 		sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2656 		goto out_err;
2657 	}
2658 	mutex_unlock(&sdata->local->sta_mtx);
2659 
2660 	cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2661 	return;
2662  out_err:
2663 	mutex_unlock(&sdata->local->sta_mtx);
2664 	/* ignore frame -- wait for timeout */
2665 }
2666 
2667 #define case_WLAN(type) \
2668 	case WLAN_REASON_##type: return #type
2669 
2670 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2671 {
2672 	switch (reason_code) {
2673 	case_WLAN(UNSPECIFIED);
2674 	case_WLAN(PREV_AUTH_NOT_VALID);
2675 	case_WLAN(DEAUTH_LEAVING);
2676 	case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2677 	case_WLAN(DISASSOC_AP_BUSY);
2678 	case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2679 	case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2680 	case_WLAN(DISASSOC_STA_HAS_LEFT);
2681 	case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2682 	case_WLAN(DISASSOC_BAD_POWER);
2683 	case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2684 	case_WLAN(INVALID_IE);
2685 	case_WLAN(MIC_FAILURE);
2686 	case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2687 	case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2688 	case_WLAN(IE_DIFFERENT);
2689 	case_WLAN(INVALID_GROUP_CIPHER);
2690 	case_WLAN(INVALID_PAIRWISE_CIPHER);
2691 	case_WLAN(INVALID_AKMP);
2692 	case_WLAN(UNSUPP_RSN_VERSION);
2693 	case_WLAN(INVALID_RSN_IE_CAP);
2694 	case_WLAN(IEEE8021X_FAILED);
2695 	case_WLAN(CIPHER_SUITE_REJECTED);
2696 	case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2697 	case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2698 	case_WLAN(DISASSOC_LOW_ACK);
2699 	case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2700 	case_WLAN(QSTA_LEAVE_QBSS);
2701 	case_WLAN(QSTA_NOT_USE);
2702 	case_WLAN(QSTA_REQUIRE_SETUP);
2703 	case_WLAN(QSTA_TIMEOUT);
2704 	case_WLAN(QSTA_CIPHER_NOT_SUPP);
2705 	case_WLAN(MESH_PEER_CANCELED);
2706 	case_WLAN(MESH_MAX_PEERS);
2707 	case_WLAN(MESH_CONFIG);
2708 	case_WLAN(MESH_CLOSE);
2709 	case_WLAN(MESH_MAX_RETRIES);
2710 	case_WLAN(MESH_CONFIRM_TIMEOUT);
2711 	case_WLAN(MESH_INVALID_GTK);
2712 	case_WLAN(MESH_INCONSISTENT_PARAM);
2713 	case_WLAN(MESH_INVALID_SECURITY);
2714 	case_WLAN(MESH_PATH_ERROR);
2715 	case_WLAN(MESH_PATH_NOFORWARD);
2716 	case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2717 	case_WLAN(MAC_EXISTS_IN_MBSS);
2718 	case_WLAN(MESH_CHAN_REGULATORY);
2719 	case_WLAN(MESH_CHAN);
2720 	default: return "<unknown>";
2721 	}
2722 }
2723 
2724 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2725 				     struct ieee80211_mgmt *mgmt, size_t len)
2726 {
2727 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2728 	u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2729 
2730 	sdata_assert_lock(sdata);
2731 
2732 	if (len < 24 + 2)
2733 		return;
2734 
2735 	if (ifmgd->associated &&
2736 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2737 		const u8 *bssid = ifmgd->associated->bssid;
2738 
2739 		sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2740 			   bssid, reason_code,
2741 			   ieee80211_get_reason_code_string(reason_code));
2742 
2743 		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2744 
2745 		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2746 					    reason_code);
2747 		return;
2748 	}
2749 
2750 	if (ifmgd->assoc_data &&
2751 	    ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2752 		const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2753 
2754 		sdata_info(sdata,
2755 			   "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2756 			   bssid, reason_code,
2757 			   ieee80211_get_reason_code_string(reason_code));
2758 
2759 		ieee80211_destroy_assoc_data(sdata, false, true);
2760 
2761 		cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2762 		return;
2763 	}
2764 }
2765 
2766 
2767 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2768 				       struct ieee80211_mgmt *mgmt, size_t len)
2769 {
2770 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2771 	u16 reason_code;
2772 
2773 	sdata_assert_lock(sdata);
2774 
2775 	if (len < 24 + 2)
2776 		return;
2777 
2778 	if (!ifmgd->associated ||
2779 	    !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2780 		return;
2781 
2782 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2783 
2784 	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
2785 		   mgmt->sa, reason_code,
2786 		   ieee80211_get_reason_code_string(reason_code));
2787 
2788 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2789 
2790 	ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
2791 }
2792 
2793 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2794 				u8 *supp_rates, unsigned int supp_rates_len,
2795 				u32 *rates, u32 *basic_rates,
2796 				bool *have_higher_than_11mbit,
2797 				int *min_rate, int *min_rate_index,
2798 				int shift)
2799 {
2800 	int i, j;
2801 
2802 	for (i = 0; i < supp_rates_len; i++) {
2803 		int rate = supp_rates[i] & 0x7f;
2804 		bool is_basic = !!(supp_rates[i] & 0x80);
2805 
2806 		if ((rate * 5 * (1 << shift)) > 110)
2807 			*have_higher_than_11mbit = true;
2808 
2809 		/*
2810 		 * Skip HT and VHT BSS membership selectors since they're not
2811 		 * rates.
2812 		 *
2813 		 * Note: Even though the membership selector and the basic
2814 		 *	 rate flag share the same bit, they are not exactly
2815 		 *	 the same.
2816 		 */
2817 		if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
2818 		    supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY))
2819 			continue;
2820 
2821 		for (j = 0; j < sband->n_bitrates; j++) {
2822 			struct ieee80211_rate *br;
2823 			int brate;
2824 
2825 			br = &sband->bitrates[j];
2826 
2827 			brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2828 			if (brate == rate) {
2829 				*rates |= BIT(j);
2830 				if (is_basic)
2831 					*basic_rates |= BIT(j);
2832 				if ((rate * 5) < *min_rate) {
2833 					*min_rate = rate * 5;
2834 					*min_rate_index = j;
2835 				}
2836 				break;
2837 			}
2838 		}
2839 	}
2840 }
2841 
2842 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2843 				    struct cfg80211_bss *cbss,
2844 				    struct ieee80211_mgmt *mgmt, size_t len)
2845 {
2846 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2847 	struct ieee80211_local *local = sdata->local;
2848 	struct ieee80211_supported_band *sband;
2849 	struct sta_info *sta;
2850 	u8 *pos;
2851 	u16 capab_info, aid;
2852 	struct ieee802_11_elems elems;
2853 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2854 	const struct cfg80211_bss_ies *bss_ies = NULL;
2855 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2856 	u32 changed = 0;
2857 	int err;
2858 	bool ret;
2859 
2860 	/* AssocResp and ReassocResp have identical structure */
2861 
2862 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2863 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2864 
2865 	/*
2866 	 * The 5 MSB of the AID field are reserved
2867 	 * (802.11-2016 9.4.1.8 AID field)
2868 	 */
2869 	aid &= 0x7ff;
2870 
2871 	ifmgd->broken_ap = false;
2872 
2873 	if (aid == 0 || aid > IEEE80211_MAX_AID) {
2874 		sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2875 			   aid);
2876 		aid = 0;
2877 		ifmgd->broken_ap = true;
2878 	}
2879 
2880 	pos = mgmt->u.assoc_resp.variable;
2881 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2882 
2883 	if (!elems.supp_rates) {
2884 		sdata_info(sdata, "no SuppRates element in AssocResp\n");
2885 		return false;
2886 	}
2887 
2888 	ifmgd->aid = aid;
2889 	ifmgd->tdls_chan_switch_prohibited =
2890 		elems.ext_capab && elems.ext_capab_len >= 5 &&
2891 		(elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2892 
2893 	/*
2894 	 * Some APs are erroneously not including some information in their
2895 	 * (re)association response frames. Try to recover by using the data
2896 	 * from the beacon or probe response. This seems to afflict mobile
2897 	 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2898 	 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2899 	 */
2900 	if ((assoc_data->wmm && !elems.wmm_param) ||
2901 	    (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2902 	     (!elems.ht_cap_elem || !elems.ht_operation)) ||
2903 	    (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2904 	     (!elems.vht_cap_elem || !elems.vht_operation))) {
2905 		const struct cfg80211_bss_ies *ies;
2906 		struct ieee802_11_elems bss_elems;
2907 
2908 		rcu_read_lock();
2909 		ies = rcu_dereference(cbss->ies);
2910 		if (ies)
2911 			bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2912 					  GFP_ATOMIC);
2913 		rcu_read_unlock();
2914 		if (!bss_ies)
2915 			return false;
2916 
2917 		ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2918 				       false, &bss_elems);
2919 		if (assoc_data->wmm &&
2920 		    !elems.wmm_param && bss_elems.wmm_param) {
2921 			elems.wmm_param = bss_elems.wmm_param;
2922 			sdata_info(sdata,
2923 				   "AP bug: WMM param missing from AssocResp\n");
2924 		}
2925 
2926 		/*
2927 		 * Also check if we requested HT/VHT, otherwise the AP doesn't
2928 		 * have to include the IEs in the (re)association response.
2929 		 */
2930 		if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2931 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2932 			elems.ht_cap_elem = bss_elems.ht_cap_elem;
2933 			sdata_info(sdata,
2934 				   "AP bug: HT capability missing from AssocResp\n");
2935 		}
2936 		if (!elems.ht_operation && bss_elems.ht_operation &&
2937 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2938 			elems.ht_operation = bss_elems.ht_operation;
2939 			sdata_info(sdata,
2940 				   "AP bug: HT operation missing from AssocResp\n");
2941 		}
2942 		if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2943 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2944 			elems.vht_cap_elem = bss_elems.vht_cap_elem;
2945 			sdata_info(sdata,
2946 				   "AP bug: VHT capa missing from AssocResp\n");
2947 		}
2948 		if (!elems.vht_operation && bss_elems.vht_operation &&
2949 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2950 			elems.vht_operation = bss_elems.vht_operation;
2951 			sdata_info(sdata,
2952 				   "AP bug: VHT operation missing from AssocResp\n");
2953 		}
2954 	}
2955 
2956 	/*
2957 	 * We previously checked these in the beacon/probe response, so
2958 	 * they should be present here. This is just a safety net.
2959 	 */
2960 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2961 	    (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2962 		sdata_info(sdata,
2963 			   "HT AP is missing WMM params or HT capability/operation\n");
2964 		ret = false;
2965 		goto out;
2966 	}
2967 
2968 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2969 	    (!elems.vht_cap_elem || !elems.vht_operation)) {
2970 		sdata_info(sdata,
2971 			   "VHT AP is missing VHT capability/operation\n");
2972 		ret = false;
2973 		goto out;
2974 	}
2975 
2976 	mutex_lock(&sdata->local->sta_mtx);
2977 	/*
2978 	 * station info was already allocated and inserted before
2979 	 * the association and should be available to us
2980 	 */
2981 	sta = sta_info_get(sdata, cbss->bssid);
2982 	if (WARN_ON(!sta)) {
2983 		mutex_unlock(&sdata->local->sta_mtx);
2984 		ret = false;
2985 		goto out;
2986 	}
2987 
2988 	sband = ieee80211_get_sband(sdata);
2989 	if (!sband) {
2990 		mutex_unlock(&sdata->local->sta_mtx);
2991 		ret = false;
2992 		goto out;
2993 	}
2994 
2995 	/* Set up internal HT/VHT capabilities */
2996 	if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
2997 		ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
2998 						  elems.ht_cap_elem, sta);
2999 
3000 	if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3001 		ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3002 						    elems.vht_cap_elem, sta);
3003 
3004 	/*
3005 	 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3006 	 * in their association response, so ignore that data for our own
3007 	 * configuration. If it changed since the last beacon, we'll get the
3008 	 * next beacon and update then.
3009 	 */
3010 
3011 	/*
3012 	 * If an operating mode notification IE is present, override the
3013 	 * NSS calculation (that would be done in rate_control_rate_init())
3014 	 * and use the # of streams from that element.
3015 	 */
3016 	if (elems.opmode_notif &&
3017 	    !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3018 		u8 nss;
3019 
3020 		nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3021 		nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3022 		nss += 1;
3023 		sta->sta.rx_nss = nss;
3024 	}
3025 
3026 	rate_control_rate_init(sta);
3027 
3028 	if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3029 		set_sta_flag(sta, WLAN_STA_MFP);
3030 		sta->sta.mfp = true;
3031 	} else {
3032 		sta->sta.mfp = false;
3033 	}
3034 
3035 	sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3036 
3037 	err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3038 	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3039 		err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3040 	if (err) {
3041 		sdata_info(sdata,
3042 			   "failed to move station %pM to desired state\n",
3043 			   sta->sta.addr);
3044 		WARN_ON(__sta_info_destroy(sta));
3045 		mutex_unlock(&sdata->local->sta_mtx);
3046 		ret = false;
3047 		goto out;
3048 	}
3049 
3050 	mutex_unlock(&sdata->local->sta_mtx);
3051 
3052 	/*
3053 	 * Always handle WMM once after association regardless
3054 	 * of the first value the AP uses. Setting -1 here has
3055 	 * that effect because the AP values is an unsigned
3056 	 * 4-bit value.
3057 	 */
3058 	ifmgd->wmm_last_param_set = -1;
3059 
3060 	if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3061 		ieee80211_set_wmm_default(sdata, false, false);
3062 	} else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3063 					     elems.wmm_param_len)) {
3064 		/* still enable QoS since we might have HT/VHT */
3065 		ieee80211_set_wmm_default(sdata, false, true);
3066 		/* set the disable-WMM flag in this case to disable
3067 		 * tracking WMM parameter changes in the beacon if
3068 		 * the parameters weren't actually valid. Doing so
3069 		 * avoids changing parameters very strangely when
3070 		 * the AP is going back and forth between valid and
3071 		 * invalid parameters.
3072 		 */
3073 		ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3074 	}
3075 	changed |= BSS_CHANGED_QOS;
3076 
3077 	if (elems.max_idle_period_ie) {
3078 		bss_conf->max_idle_period =
3079 			le16_to_cpu(elems.max_idle_period_ie->max_idle_period);
3080 		bss_conf->protected_keep_alive =
3081 			!!(elems.max_idle_period_ie->idle_options &
3082 			   WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
3083 		changed |= BSS_CHANGED_KEEP_ALIVE;
3084 	} else {
3085 		bss_conf->max_idle_period = 0;
3086 		bss_conf->protected_keep_alive = false;
3087 	}
3088 
3089 	/* set AID and assoc capability,
3090 	 * ieee80211_set_associated() will tell the driver */
3091 	bss_conf->aid = aid;
3092 	bss_conf->assoc_capability = capab_info;
3093 	ieee80211_set_associated(sdata, cbss, changed);
3094 
3095 	/*
3096 	 * If we're using 4-addr mode, let the AP know that we're
3097 	 * doing so, so that it can create the STA VLAN on its side
3098 	 */
3099 	if (ifmgd->use_4addr)
3100 		ieee80211_send_4addr_nullfunc(local, sdata);
3101 
3102 	/*
3103 	 * Start timer to probe the connection to the AP now.
3104 	 * Also start the timer that will detect beacon loss.
3105 	 */
3106 	ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3107 	ieee80211_sta_reset_beacon_monitor(sdata);
3108 
3109 	ret = true;
3110  out:
3111 	kfree(bss_ies);
3112 	return ret;
3113 }
3114 
3115 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3116 					 struct ieee80211_mgmt *mgmt,
3117 					 size_t len)
3118 {
3119 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3120 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3121 	u16 capab_info, status_code, aid;
3122 	struct ieee802_11_elems elems;
3123 	int ac, uapsd_queues = -1;
3124 	u8 *pos;
3125 	bool reassoc;
3126 	struct cfg80211_bss *bss;
3127 	struct ieee80211_event event = {
3128 		.type = MLME_EVENT,
3129 		.u.mlme.data = ASSOC_EVENT,
3130 	};
3131 
3132 	sdata_assert_lock(sdata);
3133 
3134 	if (!assoc_data)
3135 		return;
3136 	if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3137 		return;
3138 
3139 	/*
3140 	 * AssocResp and ReassocResp have identical structure, so process both
3141 	 * of them in this function.
3142 	 */
3143 
3144 	if (len < 24 + 6)
3145 		return;
3146 
3147 	reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
3148 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3149 	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3150 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3151 
3152 	sdata_info(sdata,
3153 		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3154 		   reassoc ? "Rea" : "A", mgmt->sa,
3155 		   capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3156 
3157 	if (assoc_data->fils_kek_len &&
3158 	    fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
3159 		return;
3160 
3161 	pos = mgmt->u.assoc_resp.variable;
3162 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3163 
3164 	if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3165 	    elems.timeout_int &&
3166 	    elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3167 		u32 tu, ms;
3168 		tu = le32_to_cpu(elems.timeout_int->value);
3169 		ms = tu * 1024 / 1000;
3170 		sdata_info(sdata,
3171 			   "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3172 			   mgmt->sa, tu, ms);
3173 		assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3174 		assoc_data->timeout_started = true;
3175 		if (ms > IEEE80211_ASSOC_TIMEOUT)
3176 			run_again(sdata, assoc_data->timeout);
3177 		return;
3178 	}
3179 
3180 	bss = assoc_data->bss;
3181 
3182 	if (status_code != WLAN_STATUS_SUCCESS) {
3183 		sdata_info(sdata, "%pM denied association (code=%d)\n",
3184 			   mgmt->sa, status_code);
3185 		ieee80211_destroy_assoc_data(sdata, false, false);
3186 		event.u.mlme.status = MLME_DENIED;
3187 		event.u.mlme.reason = status_code;
3188 		drv_event_callback(sdata->local, sdata, &event);
3189 	} else {
3190 		if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3191 			/* oops -- internal error -- send timeout for now */
3192 			ieee80211_destroy_assoc_data(sdata, false, false);
3193 			cfg80211_assoc_timeout(sdata->dev, bss);
3194 			return;
3195 		}
3196 		event.u.mlme.status = MLME_SUCCESS;
3197 		drv_event_callback(sdata->local, sdata, &event);
3198 		sdata_info(sdata, "associated\n");
3199 
3200 		/*
3201 		 * destroy assoc_data afterwards, as otherwise an idle
3202 		 * recalc after assoc_data is NULL but before associated
3203 		 * is set can cause the interface to go idle
3204 		 */
3205 		ieee80211_destroy_assoc_data(sdata, true, false);
3206 
3207 		/* get uapsd queues configuration */
3208 		uapsd_queues = 0;
3209 		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3210 			if (sdata->tx_conf[ac].uapsd)
3211 				uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
3212 	}
3213 
3214 	cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3215 }
3216 
3217 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3218 				  struct ieee80211_mgmt *mgmt, size_t len,
3219 				  struct ieee80211_rx_status *rx_status,
3220 				  struct ieee802_11_elems *elems)
3221 {
3222 	struct ieee80211_local *local = sdata->local;
3223 	struct ieee80211_bss *bss;
3224 	struct ieee80211_channel *channel;
3225 
3226 	sdata_assert_lock(sdata);
3227 
3228 	channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3229 	if (!channel)
3230 		return;
3231 
3232 	bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3233 					channel);
3234 	if (bss) {
3235 		sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3236 		ieee80211_rx_bss_put(local, bss);
3237 	}
3238 }
3239 
3240 
3241 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3242 					 struct sk_buff *skb)
3243 {
3244 	struct ieee80211_mgmt *mgmt = (void *)skb->data;
3245 	struct ieee80211_if_managed *ifmgd;
3246 	struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3247 	size_t baselen, len = skb->len;
3248 	struct ieee802_11_elems elems;
3249 
3250 	ifmgd = &sdata->u.mgd;
3251 
3252 	sdata_assert_lock(sdata);
3253 
3254 	if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3255 		return; /* ignore ProbeResp to foreign address */
3256 
3257 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3258 	if (baselen > len)
3259 		return;
3260 
3261 	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3262 			       false, &elems);
3263 
3264 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3265 
3266 	if (ifmgd->associated &&
3267 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3268 		ieee80211_reset_ap_probe(sdata);
3269 }
3270 
3271 /*
3272  * This is the canonical list of information elements we care about,
3273  * the filter code also gives us all changes to the Microsoft OUI
3274  * (00:50:F2) vendor IE which is used for WMM which we need to track,
3275  * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3276  * changes to requested client power.
3277  *
3278  * We implement beacon filtering in software since that means we can
3279  * avoid processing the frame here and in cfg80211, and userspace
3280  * will not be able to tell whether the hardware supports it or not.
3281  *
3282  * XXX: This list needs to be dynamic -- userspace needs to be able to
3283  *	add items it requires. It also needs to be able to tell us to
3284  *	look out for other vendor IEs.
3285  */
3286 static const u64 care_about_ies =
3287 	(1ULL << WLAN_EID_COUNTRY) |
3288 	(1ULL << WLAN_EID_ERP_INFO) |
3289 	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
3290 	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
3291 	(1ULL << WLAN_EID_HT_CAPABILITY) |
3292 	(1ULL << WLAN_EID_HT_OPERATION) |
3293 	(1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3294 
3295 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3296 				     struct ieee80211_mgmt *mgmt, size_t len,
3297 				     struct ieee80211_rx_status *rx_status)
3298 {
3299 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3300 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3301 	size_t baselen;
3302 	struct ieee802_11_elems elems;
3303 	struct ieee80211_local *local = sdata->local;
3304 	struct ieee80211_chanctx_conf *chanctx_conf;
3305 	struct ieee80211_channel *chan;
3306 	struct sta_info *sta;
3307 	u32 changed = 0;
3308 	bool erp_valid;
3309 	u8 erp_value = 0;
3310 	u32 ncrc;
3311 	u8 *bssid;
3312 	u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3313 
3314 	sdata_assert_lock(sdata);
3315 
3316 	/* Process beacon from the current BSS */
3317 	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3318 	if (baselen > len)
3319 		return;
3320 
3321 	rcu_read_lock();
3322 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3323 	if (!chanctx_conf) {
3324 		rcu_read_unlock();
3325 		return;
3326 	}
3327 
3328 	if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3329 		rcu_read_unlock();
3330 		return;
3331 	}
3332 	chan = chanctx_conf->def.chan;
3333 	rcu_read_unlock();
3334 
3335 	if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3336 	    ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3337 		ieee802_11_parse_elems(mgmt->u.beacon.variable,
3338 				       len - baselen, false, &elems);
3339 
3340 		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3341 		if (elems.tim && !elems.parse_error) {
3342 			const struct ieee80211_tim_ie *tim_ie = elems.tim;
3343 			ifmgd->dtim_period = tim_ie->dtim_period;
3344 		}
3345 		ifmgd->have_beacon = true;
3346 		ifmgd->assoc_data->need_beacon = false;
3347 		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3348 			sdata->vif.bss_conf.sync_tsf =
3349 				le64_to_cpu(mgmt->u.beacon.timestamp);
3350 			sdata->vif.bss_conf.sync_device_ts =
3351 				rx_status->device_timestamp;
3352 			if (elems.tim)
3353 				sdata->vif.bss_conf.sync_dtim_count =
3354 					elems.tim->dtim_count;
3355 			else
3356 				sdata->vif.bss_conf.sync_dtim_count = 0;
3357 		}
3358 		/* continue assoc process */
3359 		ifmgd->assoc_data->timeout = jiffies;
3360 		ifmgd->assoc_data->timeout_started = true;
3361 		run_again(sdata, ifmgd->assoc_data->timeout);
3362 		return;
3363 	}
3364 
3365 	if (!ifmgd->associated ||
3366 	    !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3367 		return;
3368 	bssid = ifmgd->associated->bssid;
3369 
3370 	/* Track average RSSI from the Beacon frames of the current AP */
3371 	if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3372 		ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3373 		ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3374 		ifmgd->last_cqm_event_signal = 0;
3375 		ifmgd->count_beacon_signal = 1;
3376 		ifmgd->last_ave_beacon_signal = 0;
3377 	} else {
3378 		ifmgd->count_beacon_signal++;
3379 	}
3380 
3381 	ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3382 
3383 	if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3384 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3385 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3386 		int last_sig = ifmgd->last_ave_beacon_signal;
3387 		struct ieee80211_event event = {
3388 			.type = RSSI_EVENT,
3389 		};
3390 
3391 		/*
3392 		 * if signal crosses either of the boundaries, invoke callback
3393 		 * with appropriate parameters
3394 		 */
3395 		if (sig > ifmgd->rssi_max_thold &&
3396 		    (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3397 			ifmgd->last_ave_beacon_signal = sig;
3398 			event.u.rssi.data = RSSI_EVENT_HIGH;
3399 			drv_event_callback(local, sdata, &event);
3400 		} else if (sig < ifmgd->rssi_min_thold &&
3401 			   (last_sig >= ifmgd->rssi_max_thold ||
3402 			   last_sig == 0)) {
3403 			ifmgd->last_ave_beacon_signal = sig;
3404 			event.u.rssi.data = RSSI_EVENT_LOW;
3405 			drv_event_callback(local, sdata, &event);
3406 		}
3407 	}
3408 
3409 	if (bss_conf->cqm_rssi_thold &&
3410 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3411 	    !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3412 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3413 		int last_event = ifmgd->last_cqm_event_signal;
3414 		int thold = bss_conf->cqm_rssi_thold;
3415 		int hyst = bss_conf->cqm_rssi_hyst;
3416 
3417 		if (sig < thold &&
3418 		    (last_event == 0 || sig < last_event - hyst)) {
3419 			ifmgd->last_cqm_event_signal = sig;
3420 			ieee80211_cqm_rssi_notify(
3421 				&sdata->vif,
3422 				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3423 				sig, GFP_KERNEL);
3424 		} else if (sig > thold &&
3425 			   (last_event == 0 || sig > last_event + hyst)) {
3426 			ifmgd->last_cqm_event_signal = sig;
3427 			ieee80211_cqm_rssi_notify(
3428 				&sdata->vif,
3429 				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3430 				sig, GFP_KERNEL);
3431 		}
3432 	}
3433 
3434 	if (bss_conf->cqm_rssi_low &&
3435 	    ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3436 		int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3437 		int last_event = ifmgd->last_cqm_event_signal;
3438 		int low = bss_conf->cqm_rssi_low;
3439 		int high = bss_conf->cqm_rssi_high;
3440 
3441 		if (sig < low &&
3442 		    (last_event == 0 || last_event >= low)) {
3443 			ifmgd->last_cqm_event_signal = sig;
3444 			ieee80211_cqm_rssi_notify(
3445 				&sdata->vif,
3446 				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3447 				sig, GFP_KERNEL);
3448 		} else if (sig > high &&
3449 			   (last_event == 0 || last_event <= high)) {
3450 			ifmgd->last_cqm_event_signal = sig;
3451 			ieee80211_cqm_rssi_notify(
3452 				&sdata->vif,
3453 				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3454 				sig, GFP_KERNEL);
3455 		}
3456 	}
3457 
3458 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3459 		mlme_dbg_ratelimited(sdata,
3460 				     "cancelling AP probe due to a received beacon\n");
3461 		ieee80211_reset_ap_probe(sdata);
3462 	}
3463 
3464 	/*
3465 	 * Push the beacon loss detection into the future since
3466 	 * we are processing a beacon from the AP just now.
3467 	 */
3468 	ieee80211_sta_reset_beacon_monitor(sdata);
3469 
3470 	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3471 	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3472 					  len - baselen, false, &elems,
3473 					  care_about_ies, ncrc);
3474 
3475 	if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
3476 	    ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
3477 		if (local->hw.conf.dynamic_ps_timeout > 0) {
3478 			if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3479 				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3480 				ieee80211_hw_config(local,
3481 						    IEEE80211_CONF_CHANGE_PS);
3482 			}
3483 			ieee80211_send_nullfunc(local, sdata, false);
3484 		} else if (!local->pspolling && sdata->u.mgd.powersave) {
3485 			local->pspolling = true;
3486 
3487 			/*
3488 			 * Here is assumed that the driver will be
3489 			 * able to send ps-poll frame and receive a
3490 			 * response even though power save mode is
3491 			 * enabled, but some drivers might require
3492 			 * to disable power save here. This needs
3493 			 * to be investigated.
3494 			 */
3495 			ieee80211_send_pspoll(local, sdata);
3496 		}
3497 	}
3498 
3499 	if (sdata->vif.p2p ||
3500 	    sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
3501 		struct ieee80211_p2p_noa_attr noa = {};
3502 		int ret;
3503 
3504 		ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3505 					    len - baselen,
3506 					    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3507 					    (u8 *) &noa, sizeof(noa));
3508 		if (ret >= 2) {
3509 			if (sdata->u.mgd.p2p_noa_index != noa.index) {
3510 				/* valid noa_attr and index changed */
3511 				sdata->u.mgd.p2p_noa_index = noa.index;
3512 				memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3513 				changed |= BSS_CHANGED_P2P_PS;
3514 				/*
3515 				 * make sure we update all information, the CRC
3516 				 * mechanism doesn't look at P2P attributes.
3517 				 */
3518 				ifmgd->beacon_crc_valid = false;
3519 			}
3520 		} else if (sdata->u.mgd.p2p_noa_index != -1) {
3521 			/* noa_attr not found and we had valid noa_attr before */
3522 			sdata->u.mgd.p2p_noa_index = -1;
3523 			memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3524 			changed |= BSS_CHANGED_P2P_PS;
3525 			ifmgd->beacon_crc_valid = false;
3526 		}
3527 	}
3528 
3529 	if (ifmgd->csa_waiting_bcn)
3530 		ieee80211_chswitch_post_beacon(sdata);
3531 
3532 	/*
3533 	 * Update beacon timing and dtim count on every beacon appearance. This
3534 	 * will allow the driver to use the most updated values. Do it before
3535 	 * comparing this one with last received beacon.
3536 	 * IMPORTANT: These parameters would possibly be out of sync by the time
3537 	 * the driver will use them. The synchronized view is currently
3538 	 * guaranteed only in certain callbacks.
3539 	 */
3540 	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3541 		sdata->vif.bss_conf.sync_tsf =
3542 			le64_to_cpu(mgmt->u.beacon.timestamp);
3543 		sdata->vif.bss_conf.sync_device_ts =
3544 			rx_status->device_timestamp;
3545 		if (elems.tim)
3546 			sdata->vif.bss_conf.sync_dtim_count =
3547 				elems.tim->dtim_count;
3548 		else
3549 			sdata->vif.bss_conf.sync_dtim_count = 0;
3550 	}
3551 
3552 	if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3553 		return;
3554 	ifmgd->beacon_crc = ncrc;
3555 	ifmgd->beacon_crc_valid = true;
3556 
3557 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3558 
3559 	ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3560 					 rx_status->device_timestamp,
3561 					 &elems, true);
3562 
3563 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3564 	    ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3565 				     elems.wmm_param_len))
3566 		changed |= BSS_CHANGED_QOS;
3567 
3568 	/*
3569 	 * If we haven't had a beacon before, tell the driver about the
3570 	 * DTIM period (and beacon timing if desired) now.
3571 	 */
3572 	if (!ifmgd->have_beacon) {
3573 		/* a few bogus AP send dtim_period = 0 or no TIM IE */
3574 		if (elems.tim)
3575 			bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3576 		else
3577 			bss_conf->dtim_period = 1;
3578 
3579 		changed |= BSS_CHANGED_BEACON_INFO;
3580 		ifmgd->have_beacon = true;
3581 
3582 		mutex_lock(&local->iflist_mtx);
3583 		ieee80211_recalc_ps(local);
3584 		mutex_unlock(&local->iflist_mtx);
3585 
3586 		ieee80211_recalc_ps_vif(sdata);
3587 	}
3588 
3589 	if (elems.erp_info) {
3590 		erp_valid = true;
3591 		erp_value = elems.erp_info[0];
3592 	} else {
3593 		erp_valid = false;
3594 	}
3595 	changed |= ieee80211_handle_bss_capability(sdata,
3596 			le16_to_cpu(mgmt->u.beacon.capab_info),
3597 			erp_valid, erp_value);
3598 
3599 	mutex_lock(&local->sta_mtx);
3600 	sta = sta_info_get(sdata, bssid);
3601 
3602 	if (ieee80211_config_bw(sdata, sta,
3603 				elems.ht_cap_elem, elems.ht_operation,
3604 				elems.vht_operation, bssid, &changed)) {
3605 		mutex_unlock(&local->sta_mtx);
3606 		sdata_info(sdata,
3607 			   "failed to follow AP %pM bandwidth change, disconnect\n",
3608 			   bssid);
3609 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3610 				       WLAN_REASON_DEAUTH_LEAVING,
3611 				       true, deauth_buf);
3612 		ieee80211_report_disconnect(sdata, deauth_buf,
3613 					    sizeof(deauth_buf), true,
3614 					    WLAN_REASON_DEAUTH_LEAVING);
3615 		return;
3616 	}
3617 
3618 	if (sta && elems.opmode_notif)
3619 		ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3620 					    rx_status->band);
3621 	mutex_unlock(&local->sta_mtx);
3622 
3623 	changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3624 					       elems.country_elem,
3625 					       elems.country_elem_len,
3626 					       elems.pwr_constr_elem,
3627 					       elems.cisco_dtpc_elem);
3628 
3629 	ieee80211_bss_info_change_notify(sdata, changed);
3630 }
3631 
3632 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3633 				  struct sk_buff *skb)
3634 {
3635 	struct ieee80211_rx_status *rx_status;
3636 	struct ieee80211_mgmt *mgmt;
3637 	u16 fc;
3638 	struct ieee802_11_elems elems;
3639 	int ies_len;
3640 
3641 	rx_status = (struct ieee80211_rx_status *) skb->cb;
3642 	mgmt = (struct ieee80211_mgmt *) skb->data;
3643 	fc = le16_to_cpu(mgmt->frame_control);
3644 
3645 	sdata_lock(sdata);
3646 
3647 	switch (fc & IEEE80211_FCTL_STYPE) {
3648 	case IEEE80211_STYPE_BEACON:
3649 		ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3650 		break;
3651 	case IEEE80211_STYPE_PROBE_RESP:
3652 		ieee80211_rx_mgmt_probe_resp(sdata, skb);
3653 		break;
3654 	case IEEE80211_STYPE_AUTH:
3655 		ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3656 		break;
3657 	case IEEE80211_STYPE_DEAUTH:
3658 		ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3659 		break;
3660 	case IEEE80211_STYPE_DISASSOC:
3661 		ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3662 		break;
3663 	case IEEE80211_STYPE_ASSOC_RESP:
3664 	case IEEE80211_STYPE_REASSOC_RESP:
3665 		ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3666 		break;
3667 	case IEEE80211_STYPE_ACTION:
3668 		if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3669 			ies_len = skb->len -
3670 				  offsetof(struct ieee80211_mgmt,
3671 					   u.action.u.chan_switch.variable);
3672 
3673 			if (ies_len < 0)
3674 				break;
3675 
3676 			ieee802_11_parse_elems(
3677 				mgmt->u.action.u.chan_switch.variable,
3678 				ies_len, true, &elems);
3679 
3680 			if (elems.parse_error)
3681 				break;
3682 
3683 			ieee80211_sta_process_chanswitch(sdata,
3684 						 rx_status->mactime,
3685 						 rx_status->device_timestamp,
3686 						 &elems, false);
3687 		} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3688 			ies_len = skb->len -
3689 				  offsetof(struct ieee80211_mgmt,
3690 					   u.action.u.ext_chan_switch.variable);
3691 
3692 			if (ies_len < 0)
3693 				break;
3694 
3695 			ieee802_11_parse_elems(
3696 				mgmt->u.action.u.ext_chan_switch.variable,
3697 				ies_len, true, &elems);
3698 
3699 			if (elems.parse_error)
3700 				break;
3701 
3702 			/* for the handling code pretend this was also an IE */
3703 			elems.ext_chansw_ie =
3704 				&mgmt->u.action.u.ext_chan_switch.data;
3705 
3706 			ieee80211_sta_process_chanswitch(sdata,
3707 						 rx_status->mactime,
3708 						 rx_status->device_timestamp,
3709 						 &elems, false);
3710 		}
3711 		break;
3712 	}
3713 	sdata_unlock(sdata);
3714 }
3715 
3716 static void ieee80211_sta_timer(struct timer_list *t)
3717 {
3718 	struct ieee80211_sub_if_data *sdata =
3719 		from_timer(sdata, t, u.mgd.timer);
3720 
3721 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3722 }
3723 
3724 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3725 					  u8 *bssid, u8 reason, bool tx)
3726 {
3727 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3728 
3729 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3730 			       tx, frame_buf);
3731 
3732 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
3733 				    reason);
3734 }
3735 
3736 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
3737 {
3738 	struct ieee80211_local *local = sdata->local;
3739 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3740 	struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3741 	u32 tx_flags = 0;
3742 	u16 trans = 1;
3743 	u16 status = 0;
3744 
3745 	sdata_assert_lock(sdata);
3746 
3747 	if (WARN_ON_ONCE(!auth_data))
3748 		return -EINVAL;
3749 
3750 	auth_data->tries++;
3751 
3752 	if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3753 		sdata_info(sdata, "authentication with %pM timed out\n",
3754 			   auth_data->bss->bssid);
3755 
3756 		/*
3757 		 * Most likely AP is not in the range so remove the
3758 		 * bss struct for that AP.
3759 		 */
3760 		cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3761 
3762 		return -ETIMEDOUT;
3763 	}
3764 
3765 	drv_mgd_prepare_tx(local, sdata);
3766 
3767 	sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3768 		   auth_data->bss->bssid, auth_data->tries,
3769 		   IEEE80211_AUTH_MAX_TRIES);
3770 
3771 	auth_data->expected_transaction = 2;
3772 
3773 	if (auth_data->algorithm == WLAN_AUTH_SAE) {
3774 		trans = auth_data->sae_trans;
3775 		status = auth_data->sae_status;
3776 		auth_data->expected_transaction = trans;
3777 	}
3778 
3779 	if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3780 		tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3781 			   IEEE80211_TX_INTFL_MLME_CONN_TX;
3782 
3783 	ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3784 			    auth_data->data, auth_data->data_len,
3785 			    auth_data->bss->bssid,
3786 			    auth_data->bss->bssid, NULL, 0, 0,
3787 			    tx_flags);
3788 
3789 	if (tx_flags == 0) {
3790 		auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3791 		auth_data->timeout_started = true;
3792 		run_again(sdata, auth_data->timeout);
3793 	} else {
3794 		auth_data->timeout =
3795 			round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3796 		auth_data->timeout_started = true;
3797 		run_again(sdata, auth_data->timeout);
3798 	}
3799 
3800 	return 0;
3801 }
3802 
3803 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3804 {
3805 	struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3806 	struct ieee80211_local *local = sdata->local;
3807 
3808 	sdata_assert_lock(sdata);
3809 
3810 	assoc_data->tries++;
3811 	if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3812 		sdata_info(sdata, "association with %pM timed out\n",
3813 			   assoc_data->bss->bssid);
3814 
3815 		/*
3816 		 * Most likely AP is not in the range so remove the
3817 		 * bss struct for that AP.
3818 		 */
3819 		cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3820 
3821 		return -ETIMEDOUT;
3822 	}
3823 
3824 	sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3825 		   assoc_data->bss->bssid, assoc_data->tries,
3826 		   IEEE80211_ASSOC_MAX_TRIES);
3827 	ieee80211_send_assoc(sdata);
3828 
3829 	if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3830 		assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3831 		assoc_data->timeout_started = true;
3832 		run_again(sdata, assoc_data->timeout);
3833 	} else {
3834 		assoc_data->timeout =
3835 			round_jiffies_up(jiffies +
3836 					 IEEE80211_ASSOC_TIMEOUT_LONG);
3837 		assoc_data->timeout_started = true;
3838 		run_again(sdata, assoc_data->timeout);
3839 	}
3840 
3841 	return 0;
3842 }
3843 
3844 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3845 				  __le16 fc, bool acked)
3846 {
3847 	struct ieee80211_local *local = sdata->local;
3848 
3849 	sdata->u.mgd.status_fc = fc;
3850 	sdata->u.mgd.status_acked = acked;
3851 	sdata->u.mgd.status_received = true;
3852 
3853 	ieee80211_queue_work(&local->hw, &sdata->work);
3854 }
3855 
3856 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3857 {
3858 	struct ieee80211_local *local = sdata->local;
3859 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3860 
3861 	sdata_lock(sdata);
3862 
3863 	if (ifmgd->status_received) {
3864 		__le16 fc = ifmgd->status_fc;
3865 		bool status_acked = ifmgd->status_acked;
3866 
3867 		ifmgd->status_received = false;
3868 		if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
3869 			if (status_acked) {
3870 				ifmgd->auth_data->timeout =
3871 					jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3872 				run_again(sdata, ifmgd->auth_data->timeout);
3873 			} else {
3874 				ifmgd->auth_data->timeout = jiffies - 1;
3875 			}
3876 			ifmgd->auth_data->timeout_started = true;
3877 		} else if (ifmgd->assoc_data &&
3878 			   (ieee80211_is_assoc_req(fc) ||
3879 			    ieee80211_is_reassoc_req(fc))) {
3880 			if (status_acked) {
3881 				ifmgd->assoc_data->timeout =
3882 					jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3883 				run_again(sdata, ifmgd->assoc_data->timeout);
3884 			} else {
3885 				ifmgd->assoc_data->timeout = jiffies - 1;
3886 			}
3887 			ifmgd->assoc_data->timeout_started = true;
3888 		}
3889 	}
3890 
3891 	if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3892 	    time_after(jiffies, ifmgd->auth_data->timeout)) {
3893 		if (ifmgd->auth_data->done) {
3894 			/*
3895 			 * ok ... we waited for assoc but userspace didn't,
3896 			 * so let's just kill the auth data
3897 			 */
3898 			ieee80211_destroy_auth_data(sdata, false);
3899 		} else if (ieee80211_auth(sdata)) {
3900 			u8 bssid[ETH_ALEN];
3901 			struct ieee80211_event event = {
3902 				.type = MLME_EVENT,
3903 				.u.mlme.data = AUTH_EVENT,
3904 				.u.mlme.status = MLME_TIMEOUT,
3905 			};
3906 
3907 			memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3908 
3909 			ieee80211_destroy_auth_data(sdata, false);
3910 
3911 			cfg80211_auth_timeout(sdata->dev, bssid);
3912 			drv_event_callback(sdata->local, sdata, &event);
3913 		}
3914 	} else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3915 		run_again(sdata, ifmgd->auth_data->timeout);
3916 
3917 	if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3918 	    time_after(jiffies, ifmgd->assoc_data->timeout)) {
3919 		if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3920 		    ieee80211_do_assoc(sdata)) {
3921 			struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3922 			struct ieee80211_event event = {
3923 				.type = MLME_EVENT,
3924 				.u.mlme.data = ASSOC_EVENT,
3925 				.u.mlme.status = MLME_TIMEOUT,
3926 			};
3927 
3928 			ieee80211_destroy_assoc_data(sdata, false, false);
3929 			cfg80211_assoc_timeout(sdata->dev, bss);
3930 			drv_event_callback(sdata->local, sdata, &event);
3931 		}
3932 	} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3933 		run_again(sdata, ifmgd->assoc_data->timeout);
3934 
3935 	if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3936 	    ifmgd->associated) {
3937 		u8 bssid[ETH_ALEN];
3938 		int max_tries;
3939 
3940 		memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3941 
3942 		if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3943 			max_tries = max_nullfunc_tries;
3944 		else
3945 			max_tries = max_probe_tries;
3946 
3947 		/* ACK received for nullfunc probing frame */
3948 		if (!ifmgd->probe_send_count)
3949 			ieee80211_reset_ap_probe(sdata);
3950 		else if (ifmgd->nullfunc_failed) {
3951 			if (ifmgd->probe_send_count < max_tries) {
3952 				mlme_dbg(sdata,
3953 					 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3954 					 bssid, ifmgd->probe_send_count,
3955 					 max_tries);
3956 				ieee80211_mgd_probe_ap_send(sdata);
3957 			} else {
3958 				mlme_dbg(sdata,
3959 					 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3960 					 bssid);
3961 				ieee80211_sta_connection_lost(sdata, bssid,
3962 					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3963 					false);
3964 			}
3965 		} else if (time_is_after_jiffies(ifmgd->probe_timeout))
3966 			run_again(sdata, ifmgd->probe_timeout);
3967 		else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3968 			mlme_dbg(sdata,
3969 				 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3970 				 bssid, probe_wait_ms);
3971 			ieee80211_sta_connection_lost(sdata, bssid,
3972 				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3973 		} else if (ifmgd->probe_send_count < max_tries) {
3974 			mlme_dbg(sdata,
3975 				 "No probe response from AP %pM after %dms, try %d/%i\n",
3976 				 bssid, probe_wait_ms,
3977 				 ifmgd->probe_send_count, max_tries);
3978 			ieee80211_mgd_probe_ap_send(sdata);
3979 		} else {
3980 			/*
3981 			 * We actually lost the connection ... or did we?
3982 			 * Let's make sure!
3983 			 */
3984 			mlme_dbg(sdata,
3985 				 "No probe response from AP %pM after %dms, disconnecting.\n",
3986 				 bssid, probe_wait_ms);
3987 
3988 			ieee80211_sta_connection_lost(sdata, bssid,
3989 				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3990 		}
3991 	}
3992 
3993 	sdata_unlock(sdata);
3994 }
3995 
3996 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
3997 {
3998 	struct ieee80211_sub_if_data *sdata =
3999 		from_timer(sdata, t, u.mgd.bcn_mon_timer);
4000 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4001 
4002 	if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4003 		return;
4004 
4005 	sdata->u.mgd.connection_loss = false;
4006 	ieee80211_queue_work(&sdata->local->hw,
4007 			     &sdata->u.mgd.beacon_connection_loss_work);
4008 }
4009 
4010 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
4011 {
4012 	struct ieee80211_sub_if_data *sdata =
4013 		from_timer(sdata, t, u.mgd.conn_mon_timer);
4014 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4015 	struct ieee80211_local *local = sdata->local;
4016 
4017 	if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4018 		return;
4019 
4020 	ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
4021 }
4022 
4023 static void ieee80211_sta_monitor_work(struct work_struct *work)
4024 {
4025 	struct ieee80211_sub_if_data *sdata =
4026 		container_of(work, struct ieee80211_sub_if_data,
4027 			     u.mgd.monitor_work);
4028 
4029 	ieee80211_mgd_probe_ap(sdata, false);
4030 }
4031 
4032 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4033 {
4034 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4035 		__ieee80211_stop_poll(sdata);
4036 
4037 		/* let's probe the connection once */
4038 		if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4039 			ieee80211_queue_work(&sdata->local->hw,
4040 					     &sdata->u.mgd.monitor_work);
4041 	}
4042 }
4043 
4044 #ifdef CONFIG_PM
4045 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4046 {
4047 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4048 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4049 
4050 	sdata_lock(sdata);
4051 
4052 	if (ifmgd->auth_data || ifmgd->assoc_data) {
4053 		const u8 *bssid = ifmgd->auth_data ?
4054 				ifmgd->auth_data->bss->bssid :
4055 				ifmgd->assoc_data->bss->bssid;
4056 
4057 		/*
4058 		 * If we are trying to authenticate / associate while suspending,
4059 		 * cfg80211 won't know and won't actually abort those attempts,
4060 		 * thus we need to do that ourselves.
4061 		 */
4062 		ieee80211_send_deauth_disassoc(sdata, bssid,
4063 					       IEEE80211_STYPE_DEAUTH,
4064 					       WLAN_REASON_DEAUTH_LEAVING,
4065 					       false, frame_buf);
4066 		if (ifmgd->assoc_data)
4067 			ieee80211_destroy_assoc_data(sdata, false, true);
4068 		if (ifmgd->auth_data)
4069 			ieee80211_destroy_auth_data(sdata, false);
4070 		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4071 				      IEEE80211_DEAUTH_FRAME_LEN);
4072 	}
4073 
4074 	/* This is a bit of a hack - we should find a better and more generic
4075 	 * solution to this. Normally when suspending, cfg80211 will in fact
4076 	 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4077 	 * auth (not so important) or assoc (this is the problem) process.
4078 	 *
4079 	 * As a consequence, it can happen that we are in the process of both
4080 	 * associating and suspending, and receive an association response
4081 	 * after cfg80211 has checked if it needs to disconnect, but before
4082 	 * we actually set the flag to drop incoming frames. This will then
4083 	 * cause the workqueue flush to process the association response in
4084 	 * the suspend, resulting in a successful association just before it
4085 	 * tries to remove the interface from the driver, which now though
4086 	 * has a channel context assigned ... this results in issues.
4087 	 *
4088 	 * To work around this (for now) simply deauth here again if we're
4089 	 * now connected.
4090 	 */
4091 	if (ifmgd->associated && !sdata->local->wowlan) {
4092 		u8 bssid[ETH_ALEN];
4093 		struct cfg80211_deauth_request req = {
4094 			.reason_code = WLAN_REASON_DEAUTH_LEAVING,
4095 			.bssid = bssid,
4096 		};
4097 
4098 		memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4099 		ieee80211_mgd_deauth(sdata, &req);
4100 	}
4101 
4102 	sdata_unlock(sdata);
4103 }
4104 
4105 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4106 {
4107 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4108 
4109 	sdata_lock(sdata);
4110 	if (!ifmgd->associated) {
4111 		sdata_unlock(sdata);
4112 		return;
4113 	}
4114 
4115 	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4116 		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4117 		mlme_dbg(sdata, "driver requested disconnect after resume\n");
4118 		ieee80211_sta_connection_lost(sdata,
4119 					      ifmgd->associated->bssid,
4120 					      WLAN_REASON_UNSPECIFIED,
4121 					      true);
4122 		sdata_unlock(sdata);
4123 		return;
4124 	}
4125 	sdata_unlock(sdata);
4126 }
4127 #endif
4128 
4129 /* interface setup */
4130 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4131 {
4132 	struct ieee80211_if_managed *ifmgd;
4133 
4134 	ifmgd = &sdata->u.mgd;
4135 	INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4136 	INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4137 	INIT_WORK(&ifmgd->beacon_connection_loss_work,
4138 		  ieee80211_beacon_connection_loss_work);
4139 	INIT_WORK(&ifmgd->csa_connection_drop_work,
4140 		  ieee80211_csa_connection_drop_work);
4141 	INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4142 	INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4143 			  ieee80211_tdls_peer_del_work);
4144 	timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
4145 	timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
4146 	timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
4147 	timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0);
4148 	INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4149 			  ieee80211_sta_handle_tspec_ac_params_wk);
4150 
4151 	ifmgd->flags = 0;
4152 	ifmgd->powersave = sdata->wdev.ps;
4153 	ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4154 	ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4155 	ifmgd->p2p_noa_index = -1;
4156 
4157 	if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4158 		ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4159 	else
4160 		ifmgd->req_smps = IEEE80211_SMPS_OFF;
4161 
4162 	/* Setup TDLS data */
4163 	spin_lock_init(&ifmgd->teardown_lock);
4164 	ifmgd->teardown_skb = NULL;
4165 	ifmgd->orig_teardown_skb = NULL;
4166 }
4167 
4168 /* scan finished notification */
4169 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4170 {
4171 	struct ieee80211_sub_if_data *sdata;
4172 
4173 	/* Restart STA timers */
4174 	rcu_read_lock();
4175 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4176 		if (ieee80211_sdata_running(sdata))
4177 			ieee80211_restart_sta_timer(sdata);
4178 	}
4179 	rcu_read_unlock();
4180 }
4181 
4182 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4183 				     struct cfg80211_bss *cbss)
4184 {
4185 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4186 	const u8 *ht_cap_ie, *vht_cap_ie;
4187 	const struct ieee80211_ht_cap *ht_cap;
4188 	const struct ieee80211_vht_cap *vht_cap;
4189 	u8 chains = 1;
4190 
4191 	if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4192 		return chains;
4193 
4194 	ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4195 	if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4196 		ht_cap = (void *)(ht_cap_ie + 2);
4197 		chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4198 		/*
4199 		 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4200 		 *	 "Tx Unequal Modulation Supported" fields.
4201 		 */
4202 	}
4203 
4204 	if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4205 		return chains;
4206 
4207 	vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4208 	if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4209 		u8 nss;
4210 		u16 tx_mcs_map;
4211 
4212 		vht_cap = (void *)(vht_cap_ie + 2);
4213 		tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4214 		for (nss = 8; nss > 0; nss--) {
4215 			if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4216 					IEEE80211_VHT_MCS_NOT_SUPPORTED)
4217 				break;
4218 		}
4219 		/* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4220 		chains = max(chains, nss);
4221 	}
4222 
4223 	return chains;
4224 }
4225 
4226 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4227 				  struct cfg80211_bss *cbss)
4228 {
4229 	struct ieee80211_local *local = sdata->local;
4230 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4231 	const struct ieee80211_ht_cap *ht_cap = NULL;
4232 	const struct ieee80211_ht_operation *ht_oper = NULL;
4233 	const struct ieee80211_vht_operation *vht_oper = NULL;
4234 	struct ieee80211_supported_band *sband;
4235 	struct cfg80211_chan_def chandef;
4236 	int ret;
4237 	u32 i;
4238 	bool have_80mhz;
4239 
4240 	sband = local->hw.wiphy->bands[cbss->channel->band];
4241 
4242 	ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4243 			  IEEE80211_STA_DISABLE_80P80MHZ |
4244 			  IEEE80211_STA_DISABLE_160MHZ);
4245 
4246 	rcu_read_lock();
4247 
4248 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4249 	    sband->ht_cap.ht_supported) {
4250 		const u8 *ht_oper_ie, *ht_cap_ie;
4251 
4252 		ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4253 		if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4254 			ht_oper = (void *)(ht_oper_ie + 2);
4255 
4256 		ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4257 		if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4258 			ht_cap = (void *)(ht_cap_ie + 2);
4259 
4260 		if (!ht_cap) {
4261 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4262 			ht_oper = NULL;
4263 		}
4264 	}
4265 
4266 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4267 	    sband->vht_cap.vht_supported) {
4268 		const u8 *vht_oper_ie, *vht_cap;
4269 
4270 		vht_oper_ie = ieee80211_bss_get_ie(cbss,
4271 						   WLAN_EID_VHT_OPERATION);
4272 		if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4273 			vht_oper = (void *)(vht_oper_ie + 2);
4274 		if (vht_oper && !ht_oper) {
4275 			vht_oper = NULL;
4276 			sdata_info(sdata,
4277 				   "AP advertised VHT without HT, disabling both\n");
4278 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4279 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4280 		}
4281 
4282 		vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4283 		if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4284 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4285 			vht_oper = NULL;
4286 		}
4287 	}
4288 
4289 	/* Allow VHT if at least one channel on the sband supports 80 MHz */
4290 	have_80mhz = false;
4291 	for (i = 0; i < sband->n_channels; i++) {
4292 		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4293 						IEEE80211_CHAN_NO_80MHZ))
4294 			continue;
4295 
4296 		have_80mhz = true;
4297 		break;
4298 	}
4299 
4300 	if (!have_80mhz)
4301 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4302 
4303 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4304 						     cbss->channel,
4305 						     ht_oper, vht_oper,
4306 						     &chandef, false);
4307 
4308 	sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4309 				      local->rx_chains);
4310 
4311 	rcu_read_unlock();
4312 
4313 	/* will change later if needed */
4314 	sdata->smps_mode = IEEE80211_SMPS_OFF;
4315 
4316 	mutex_lock(&local->mtx);
4317 	/*
4318 	 * If this fails (possibly due to channel context sharing
4319 	 * on incompatible channels, e.g. 80+80 and 160 sharing the
4320 	 * same control channel) try to use a smaller bandwidth.
4321 	 */
4322 	ret = ieee80211_vif_use_channel(sdata, &chandef,
4323 					IEEE80211_CHANCTX_SHARED);
4324 
4325 	/* don't downgrade for 5 and 10 MHz channels, though. */
4326 	if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4327 	    chandef.width == NL80211_CHAN_WIDTH_10)
4328 		goto out;
4329 
4330 	while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4331 		ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4332 		ret = ieee80211_vif_use_channel(sdata, &chandef,
4333 						IEEE80211_CHANCTX_SHARED);
4334 	}
4335  out:
4336 	mutex_unlock(&local->mtx);
4337 	return ret;
4338 }
4339 
4340 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4341 				     struct cfg80211_bss *cbss, bool assoc,
4342 				     bool override)
4343 {
4344 	struct ieee80211_local *local = sdata->local;
4345 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4346 	struct ieee80211_bss *bss = (void *)cbss->priv;
4347 	struct sta_info *new_sta = NULL;
4348 	struct ieee80211_supported_band *sband;
4349 	bool have_sta = false;
4350 	int err;
4351 
4352 	sband = local->hw.wiphy->bands[cbss->channel->band];
4353 
4354 	if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4355 		return -EINVAL;
4356 
4357 	/* If a reconfig is happening, bail out */
4358 	if (local->in_reconfig)
4359 		return -EBUSY;
4360 
4361 	if (assoc) {
4362 		rcu_read_lock();
4363 		have_sta = sta_info_get(sdata, cbss->bssid);
4364 		rcu_read_unlock();
4365 	}
4366 
4367 	if (!have_sta) {
4368 		new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4369 		if (!new_sta)
4370 			return -ENOMEM;
4371 	}
4372 
4373 	/*
4374 	 * Set up the information for the new channel before setting the
4375 	 * new channel. We can't - completely race-free - change the basic
4376 	 * rates bitmap and the channel (sband) that it refers to, but if
4377 	 * we set it up before we at least avoid calling into the driver's
4378 	 * bss_info_changed() method with invalid information (since we do
4379 	 * call that from changing the channel - only for IDLE and perhaps
4380 	 * some others, but ...).
4381 	 *
4382 	 * So to avoid that, just set up all the new information before the
4383 	 * channel, but tell the driver to apply it only afterwards, since
4384 	 * it might need the new channel for that.
4385 	 */
4386 	if (new_sta) {
4387 		u32 rates = 0, basic_rates = 0;
4388 		bool have_higher_than_11mbit;
4389 		int min_rate = INT_MAX, min_rate_index = -1;
4390 		const struct cfg80211_bss_ies *ies;
4391 		int shift = ieee80211_vif_get_shift(&sdata->vif);
4392 
4393 		ieee80211_get_rates(sband, bss->supp_rates,
4394 				    bss->supp_rates_len,
4395 				    &rates, &basic_rates,
4396 				    &have_higher_than_11mbit,
4397 				    &min_rate, &min_rate_index,
4398 				    shift);
4399 
4400 		/*
4401 		 * This used to be a workaround for basic rates missing
4402 		 * in the association response frame. Now that we no
4403 		 * longer use the basic rates from there, it probably
4404 		 * doesn't happen any more, but keep the workaround so
4405 		 * in case some *other* APs are buggy in different ways
4406 		 * we can connect -- with a warning.
4407 		 */
4408 		if (!basic_rates && min_rate_index >= 0) {
4409 			sdata_info(sdata,
4410 				   "No basic rates, using min rate instead\n");
4411 			basic_rates = BIT(min_rate_index);
4412 		}
4413 
4414 		new_sta->sta.supp_rates[cbss->channel->band] = rates;
4415 		sdata->vif.bss_conf.basic_rates = basic_rates;
4416 
4417 		/* cf. IEEE 802.11 9.2.12 */
4418 		if (cbss->channel->band == NL80211_BAND_2GHZ &&
4419 		    have_higher_than_11mbit)
4420 			sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4421 		else
4422 			sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4423 
4424 		memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4425 
4426 		/* set timing information */
4427 		sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4428 		rcu_read_lock();
4429 		ies = rcu_dereference(cbss->beacon_ies);
4430 		if (ies) {
4431 			const u8 *tim_ie;
4432 
4433 			sdata->vif.bss_conf.sync_tsf = ies->tsf;
4434 			sdata->vif.bss_conf.sync_device_ts =
4435 				bss->device_ts_beacon;
4436 			tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4437 						  ies->data, ies->len);
4438 			if (tim_ie && tim_ie[1] >= 2)
4439 				sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4440 			else
4441 				sdata->vif.bss_conf.sync_dtim_count = 0;
4442 		} else if (!ieee80211_hw_check(&sdata->local->hw,
4443 					       TIMING_BEACON_ONLY)) {
4444 			ies = rcu_dereference(cbss->proberesp_ies);
4445 			/* must be non-NULL since beacon IEs were NULL */
4446 			sdata->vif.bss_conf.sync_tsf = ies->tsf;
4447 			sdata->vif.bss_conf.sync_device_ts =
4448 				bss->device_ts_presp;
4449 			sdata->vif.bss_conf.sync_dtim_count = 0;
4450 		} else {
4451 			sdata->vif.bss_conf.sync_tsf = 0;
4452 			sdata->vif.bss_conf.sync_device_ts = 0;
4453 			sdata->vif.bss_conf.sync_dtim_count = 0;
4454 		}
4455 		rcu_read_unlock();
4456 	}
4457 
4458 	if (new_sta || override) {
4459 		err = ieee80211_prep_channel(sdata, cbss);
4460 		if (err) {
4461 			if (new_sta)
4462 				sta_info_free(local, new_sta);
4463 			return -EINVAL;
4464 		}
4465 	}
4466 
4467 	if (new_sta) {
4468 		/*
4469 		 * tell driver about BSSID, basic rates and timing
4470 		 * this was set up above, before setting the channel
4471 		 */
4472 		ieee80211_bss_info_change_notify(sdata,
4473 			BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4474 			BSS_CHANGED_BEACON_INT);
4475 
4476 		if (assoc)
4477 			sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4478 
4479 		err = sta_info_insert(new_sta);
4480 		new_sta = NULL;
4481 		if (err) {
4482 			sdata_info(sdata,
4483 				   "failed to insert STA entry for the AP (error %d)\n",
4484 				   err);
4485 			return err;
4486 		}
4487 	} else
4488 		WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4489 
4490 	/* Cancel scan to ensure that nothing interferes with connection */
4491 	if (local->scanning)
4492 		ieee80211_scan_cancel(local);
4493 
4494 	return 0;
4495 }
4496 
4497 /* config hooks */
4498 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4499 		       struct cfg80211_auth_request *req)
4500 {
4501 	struct ieee80211_local *local = sdata->local;
4502 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4503 	struct ieee80211_mgd_auth_data *auth_data;
4504 	u16 auth_alg;
4505 	int err;
4506 
4507 	/* prepare auth data structure */
4508 
4509 	switch (req->auth_type) {
4510 	case NL80211_AUTHTYPE_OPEN_SYSTEM:
4511 		auth_alg = WLAN_AUTH_OPEN;
4512 		break;
4513 	case NL80211_AUTHTYPE_SHARED_KEY:
4514 		if (IS_ERR(local->wep_tx_tfm))
4515 			return -EOPNOTSUPP;
4516 		auth_alg = WLAN_AUTH_SHARED_KEY;
4517 		break;
4518 	case NL80211_AUTHTYPE_FT:
4519 		auth_alg = WLAN_AUTH_FT;
4520 		break;
4521 	case NL80211_AUTHTYPE_NETWORK_EAP:
4522 		auth_alg = WLAN_AUTH_LEAP;
4523 		break;
4524 	case NL80211_AUTHTYPE_SAE:
4525 		auth_alg = WLAN_AUTH_SAE;
4526 		break;
4527 	case NL80211_AUTHTYPE_FILS_SK:
4528 		auth_alg = WLAN_AUTH_FILS_SK;
4529 		break;
4530 	case NL80211_AUTHTYPE_FILS_SK_PFS:
4531 		auth_alg = WLAN_AUTH_FILS_SK_PFS;
4532 		break;
4533 	case NL80211_AUTHTYPE_FILS_PK:
4534 		auth_alg = WLAN_AUTH_FILS_PK;
4535 		break;
4536 	default:
4537 		return -EOPNOTSUPP;
4538 	}
4539 
4540 	auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
4541 			    req->ie_len, GFP_KERNEL);
4542 	if (!auth_data)
4543 		return -ENOMEM;
4544 
4545 	auth_data->bss = req->bss;
4546 
4547 	if (req->auth_data_len >= 4) {
4548 		if (req->auth_type == NL80211_AUTHTYPE_SAE) {
4549 			__le16 *pos = (__le16 *) req->auth_data;
4550 
4551 			auth_data->sae_trans = le16_to_cpu(pos[0]);
4552 			auth_data->sae_status = le16_to_cpu(pos[1]);
4553 		}
4554 		memcpy(auth_data->data, req->auth_data + 4,
4555 		       req->auth_data_len - 4);
4556 		auth_data->data_len += req->auth_data_len - 4;
4557 	}
4558 
4559 	if (req->ie && req->ie_len) {
4560 		memcpy(&auth_data->data[auth_data->data_len],
4561 		       req->ie, req->ie_len);
4562 		auth_data->data_len += req->ie_len;
4563 	}
4564 
4565 	if (req->key && req->key_len) {
4566 		auth_data->key_len = req->key_len;
4567 		auth_data->key_idx = req->key_idx;
4568 		memcpy(auth_data->key, req->key, req->key_len);
4569 	}
4570 
4571 	auth_data->algorithm = auth_alg;
4572 
4573 	/* try to authenticate/probe */
4574 
4575 	if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4576 	    ifmgd->assoc_data) {
4577 		err = -EBUSY;
4578 		goto err_free;
4579 	}
4580 
4581 	if (ifmgd->auth_data)
4582 		ieee80211_destroy_auth_data(sdata, false);
4583 
4584 	/* prep auth_data so we don't go into idle on disassoc */
4585 	ifmgd->auth_data = auth_data;
4586 
4587 	if (ifmgd->associated) {
4588 		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4589 
4590 		sdata_info(sdata,
4591 			   "disconnect from AP %pM for new auth to %pM\n",
4592 			   ifmgd->associated->bssid, req->bss->bssid);
4593 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4594 				       WLAN_REASON_UNSPECIFIED,
4595 				       false, frame_buf);
4596 
4597 		ieee80211_report_disconnect(sdata, frame_buf,
4598 					    sizeof(frame_buf), true,
4599 					    WLAN_REASON_UNSPECIFIED);
4600 	}
4601 
4602 	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4603 
4604 	err = ieee80211_prep_connection(sdata, req->bss, false, false);
4605 	if (err)
4606 		goto err_clear;
4607 
4608 	err = ieee80211_auth(sdata);
4609 	if (err) {
4610 		sta_info_destroy_addr(sdata, req->bss->bssid);
4611 		goto err_clear;
4612 	}
4613 
4614 	/* hold our own reference */
4615 	cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4616 	return 0;
4617 
4618  err_clear:
4619 	eth_zero_addr(ifmgd->bssid);
4620 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4621 	ifmgd->auth_data = NULL;
4622 	mutex_lock(&sdata->local->mtx);
4623 	ieee80211_vif_release_channel(sdata);
4624 	mutex_unlock(&sdata->local->mtx);
4625  err_free:
4626 	kfree(auth_data);
4627 	return err;
4628 }
4629 
4630 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4631 			struct cfg80211_assoc_request *req)
4632 {
4633 	struct ieee80211_local *local = sdata->local;
4634 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4635 	struct ieee80211_bss *bss = (void *)req->bss->priv;
4636 	struct ieee80211_mgd_assoc_data *assoc_data;
4637 	const struct cfg80211_bss_ies *beacon_ies;
4638 	struct ieee80211_supported_band *sband;
4639 	const u8 *ssidie, *ht_ie, *vht_ie;
4640 	int i, err;
4641 	bool override = false;
4642 
4643 	assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4644 	if (!assoc_data)
4645 		return -ENOMEM;
4646 
4647 	rcu_read_lock();
4648 	ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4649 	if (!ssidie) {
4650 		rcu_read_unlock();
4651 		kfree(assoc_data);
4652 		return -EINVAL;
4653 	}
4654 	memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4655 	assoc_data->ssid_len = ssidie[1];
4656 	rcu_read_unlock();
4657 
4658 	if (ifmgd->associated) {
4659 		u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4660 
4661 		sdata_info(sdata,
4662 			   "disconnect from AP %pM for new assoc to %pM\n",
4663 			   ifmgd->associated->bssid, req->bss->bssid);
4664 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4665 				       WLAN_REASON_UNSPECIFIED,
4666 				       false, frame_buf);
4667 
4668 		ieee80211_report_disconnect(sdata, frame_buf,
4669 					    sizeof(frame_buf), true,
4670 					    WLAN_REASON_UNSPECIFIED);
4671 	}
4672 
4673 	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4674 		err = -EBUSY;
4675 		goto err_free;
4676 	}
4677 
4678 	if (ifmgd->assoc_data) {
4679 		err = -EBUSY;
4680 		goto err_free;
4681 	}
4682 
4683 	if (ifmgd->auth_data) {
4684 		bool match;
4685 
4686 		/* keep sta info, bssid if matching */
4687 		match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4688 		ieee80211_destroy_auth_data(sdata, match);
4689 	}
4690 
4691 	/* prepare assoc data */
4692 
4693 	ifmgd->beacon_crc_valid = false;
4694 
4695 	assoc_data->wmm = bss->wmm_used &&
4696 			  (local->hw.queues >= IEEE80211_NUM_ACS);
4697 
4698 	/*
4699 	 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4700 	 * We still associate in non-HT mode (11a/b/g) if any one of these
4701 	 * ciphers is configured as pairwise.
4702 	 * We can set this to true for non-11n hardware, that'll be checked
4703 	 * separately along with the peer capabilities.
4704 	 */
4705 	for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4706 		if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4707 		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4708 		    req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4709 			ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4710 			ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4711 			netdev_info(sdata->dev,
4712 				    "disabling HT/VHT due to WEP/TKIP use\n");
4713 		}
4714 	}
4715 
4716 	/* Also disable HT if we don't support it or the AP doesn't use WMM */
4717 	sband = local->hw.wiphy->bands[req->bss->channel->band];
4718 	if (!sband->ht_cap.ht_supported ||
4719 	    local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4720 	    ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4721 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4722 		if (!bss->wmm_used &&
4723 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4724 			netdev_info(sdata->dev,
4725 				    "disabling HT as WMM/QoS is not supported by the AP\n");
4726 	}
4727 
4728 	/* disable VHT if we don't support it or the AP doesn't use WMM */
4729 	if (!sband->vht_cap.vht_supported ||
4730 	    local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4731 	    ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4732 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4733 		if (!bss->wmm_used &&
4734 		    !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4735 			netdev_info(sdata->dev,
4736 				    "disabling VHT as WMM/QoS is not supported by the AP\n");
4737 	}
4738 
4739 	memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4740 	memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4741 	       sizeof(ifmgd->ht_capa_mask));
4742 
4743 	memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4744 	memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4745 	       sizeof(ifmgd->vht_capa_mask));
4746 
4747 	if (req->ie && req->ie_len) {
4748 		memcpy(assoc_data->ie, req->ie, req->ie_len);
4749 		assoc_data->ie_len = req->ie_len;
4750 	}
4751 
4752 	if (req->fils_kek) {
4753 		/* should already be checked in cfg80211 - so warn */
4754 		if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
4755 			err = -EINVAL;
4756 			goto err_free;
4757 		}
4758 		memcpy(assoc_data->fils_kek, req->fils_kek,
4759 		       req->fils_kek_len);
4760 		assoc_data->fils_kek_len = req->fils_kek_len;
4761 	}
4762 
4763 	if (req->fils_nonces)
4764 		memcpy(assoc_data->fils_nonces, req->fils_nonces,
4765 		       2 * FILS_NONCE_LEN);
4766 
4767 	assoc_data->bss = req->bss;
4768 
4769 	if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4770 		if (ifmgd->powersave)
4771 			sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4772 		else
4773 			sdata->smps_mode = IEEE80211_SMPS_OFF;
4774 	} else
4775 		sdata->smps_mode = ifmgd->req_smps;
4776 
4777 	assoc_data->capability = req->bss->capability;
4778 	assoc_data->supp_rates = bss->supp_rates;
4779 	assoc_data->supp_rates_len = bss->supp_rates_len;
4780 
4781 	rcu_read_lock();
4782 	ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4783 	if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4784 		assoc_data->ap_ht_param =
4785 			((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4786 	else
4787 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4788 	vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4789 	if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4790 		memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4791 		       sizeof(struct ieee80211_vht_cap));
4792 	else
4793 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4794 	rcu_read_unlock();
4795 
4796 	if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4797 		 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
4798 	     "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4799 		sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4800 
4801 	if (bss->wmm_used && bss->uapsd_supported &&
4802 	    (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4803 		assoc_data->uapsd = true;
4804 		ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4805 	} else {
4806 		assoc_data->uapsd = false;
4807 		ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4808 	}
4809 
4810 	if (req->prev_bssid)
4811 		memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4812 
4813 	if (req->use_mfp) {
4814 		ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4815 		ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4816 	} else {
4817 		ifmgd->mfp = IEEE80211_MFP_DISABLED;
4818 		ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4819 	}
4820 
4821 	if (req->flags & ASSOC_REQ_USE_RRM)
4822 		ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4823 	else
4824 		ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4825 
4826 	if (req->crypto.control_port)
4827 		ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4828 	else
4829 		ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4830 
4831 	sdata->control_port_protocol = req->crypto.control_port_ethertype;
4832 	sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4833 	sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4834 							sdata->vif.type);
4835 
4836 	/* kick off associate process */
4837 
4838 	ifmgd->assoc_data = assoc_data;
4839 	ifmgd->dtim_period = 0;
4840 	ifmgd->have_beacon = false;
4841 
4842 	/* override HT/VHT configuration only if the AP and we support it */
4843 	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
4844 		struct ieee80211_sta_ht_cap sta_ht_cap;
4845 
4846 		if (req->flags & ASSOC_REQ_DISABLE_HT)
4847 			override = true;
4848 
4849 		memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4850 		ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4851 
4852 		/* check for 40 MHz disable override */
4853 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
4854 		    sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
4855 		    !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
4856 			override = true;
4857 
4858 		if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4859 		    req->flags & ASSOC_REQ_DISABLE_VHT)
4860 			override = true;
4861 	}
4862 
4863 	if (req->flags & ASSOC_REQ_DISABLE_HT) {
4864 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4865 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4866 	}
4867 
4868 	if (req->flags & ASSOC_REQ_DISABLE_VHT)
4869 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4870 
4871 	err = ieee80211_prep_connection(sdata, req->bss, true, override);
4872 	if (err)
4873 		goto err_clear;
4874 
4875 	rcu_read_lock();
4876 	beacon_ies = rcu_dereference(req->bss->beacon_ies);
4877 
4878 	if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
4879 	    !beacon_ies) {
4880 		/*
4881 		 * Wait up to one beacon interval ...
4882 		 * should this be more if we miss one?
4883 		 */
4884 		sdata_info(sdata, "waiting for beacon from %pM\n",
4885 			   ifmgd->bssid);
4886 		assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4887 		assoc_data->timeout_started = true;
4888 		assoc_data->need_beacon = true;
4889 	} else if (beacon_ies) {
4890 		const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4891 						    beacon_ies->data,
4892 						    beacon_ies->len);
4893 		u8 dtim_count = 0;
4894 
4895 		if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4896 			const struct ieee80211_tim_ie *tim;
4897 			tim = (void *)(tim_ie + 2);
4898 			ifmgd->dtim_period = tim->dtim_period;
4899 			dtim_count = tim->dtim_count;
4900 		}
4901 		ifmgd->have_beacon = true;
4902 		assoc_data->timeout = jiffies;
4903 		assoc_data->timeout_started = true;
4904 
4905 		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4906 			sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4907 			sdata->vif.bss_conf.sync_device_ts =
4908 				bss->device_ts_beacon;
4909 			sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4910 		}
4911 	} else {
4912 		assoc_data->timeout = jiffies;
4913 		assoc_data->timeout_started = true;
4914 	}
4915 	rcu_read_unlock();
4916 
4917 	run_again(sdata, assoc_data->timeout);
4918 
4919 	if (bss->corrupt_data) {
4920 		char *corrupt_type = "data";
4921 		if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4922 			if (bss->corrupt_data &
4923 					IEEE80211_BSS_CORRUPT_PROBE_RESP)
4924 				corrupt_type = "beacon and probe response";
4925 			else
4926 				corrupt_type = "beacon";
4927 		} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4928 			corrupt_type = "probe response";
4929 		sdata_info(sdata, "associating with AP with corrupt %s\n",
4930 			   corrupt_type);
4931 	}
4932 
4933 	return 0;
4934  err_clear:
4935 	eth_zero_addr(ifmgd->bssid);
4936 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4937 	ifmgd->assoc_data = NULL;
4938  err_free:
4939 	kfree(assoc_data);
4940 	return err;
4941 }
4942 
4943 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4944 			 struct cfg80211_deauth_request *req)
4945 {
4946 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4947 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4948 	bool tx = !req->local_state_change;
4949 
4950 	if (ifmgd->auth_data &&
4951 	    ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4952 		sdata_info(sdata,
4953 			   "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4954 			   req->bssid, req->reason_code,
4955 			   ieee80211_get_reason_code_string(req->reason_code));
4956 
4957 		drv_mgd_prepare_tx(sdata->local, sdata);
4958 		ieee80211_send_deauth_disassoc(sdata, req->bssid,
4959 					       IEEE80211_STYPE_DEAUTH,
4960 					       req->reason_code, tx,
4961 					       frame_buf);
4962 		ieee80211_destroy_auth_data(sdata, false);
4963 		ieee80211_report_disconnect(sdata, frame_buf,
4964 					    sizeof(frame_buf), true,
4965 					    req->reason_code);
4966 
4967 		return 0;
4968 	}
4969 
4970 	if (ifmgd->assoc_data &&
4971 	    ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
4972 		sdata_info(sdata,
4973 			   "aborting association with %pM by local choice (Reason: %u=%s)\n",
4974 			   req->bssid, req->reason_code,
4975 			   ieee80211_get_reason_code_string(req->reason_code));
4976 
4977 		drv_mgd_prepare_tx(sdata->local, sdata);
4978 		ieee80211_send_deauth_disassoc(sdata, req->bssid,
4979 					       IEEE80211_STYPE_DEAUTH,
4980 					       req->reason_code, tx,
4981 					       frame_buf);
4982 		ieee80211_destroy_assoc_data(sdata, false, true);
4983 		ieee80211_report_disconnect(sdata, frame_buf,
4984 					    sizeof(frame_buf), true,
4985 					    req->reason_code);
4986 		return 0;
4987 	}
4988 
4989 	if (ifmgd->associated &&
4990 	    ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4991 		sdata_info(sdata,
4992 			   "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4993 			   req->bssid, req->reason_code,
4994 			   ieee80211_get_reason_code_string(req->reason_code));
4995 
4996 		ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4997 				       req->reason_code, tx, frame_buf);
4998 		ieee80211_report_disconnect(sdata, frame_buf,
4999 					    sizeof(frame_buf), true,
5000 					    req->reason_code);
5001 		return 0;
5002 	}
5003 
5004 	return -ENOTCONN;
5005 }
5006 
5007 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
5008 			   struct cfg80211_disassoc_request *req)
5009 {
5010 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5011 	u8 bssid[ETH_ALEN];
5012 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5013 
5014 	/*
5015 	 * cfg80211 should catch this ... but it's racy since
5016 	 * we can receive a disassoc frame, process it, hand it
5017 	 * to cfg80211 while that's in a locked section already
5018 	 * trying to tell us that the user wants to disconnect.
5019 	 */
5020 	if (ifmgd->associated != req->bss)
5021 		return -ENOLINK;
5022 
5023 	sdata_info(sdata,
5024 		   "disassociating from %pM by local choice (Reason: %u=%s)\n",
5025 		   req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5026 
5027 	memcpy(bssid, req->bss->bssid, ETH_ALEN);
5028 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5029 			       req->reason_code, !req->local_state_change,
5030 			       frame_buf);
5031 
5032 	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5033 				    req->reason_code);
5034 
5035 	return 0;
5036 }
5037 
5038 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5039 {
5040 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5041 
5042 	/*
5043 	 * Make sure some work items will not run after this,
5044 	 * they will not do anything but might not have been
5045 	 * cancelled when disconnecting.
5046 	 */
5047 	cancel_work_sync(&ifmgd->monitor_work);
5048 	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5049 	cancel_work_sync(&ifmgd->request_smps_work);
5050 	cancel_work_sync(&ifmgd->csa_connection_drop_work);
5051 	cancel_work_sync(&ifmgd->chswitch_work);
5052 	cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5053 
5054 	sdata_lock(sdata);
5055 	if (ifmgd->assoc_data) {
5056 		struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5057 		ieee80211_destroy_assoc_data(sdata, false, false);
5058 		cfg80211_assoc_timeout(sdata->dev, bss);
5059 	}
5060 	if (ifmgd->auth_data)
5061 		ieee80211_destroy_auth_data(sdata, false);
5062 	spin_lock_bh(&ifmgd->teardown_lock);
5063 	if (ifmgd->teardown_skb) {
5064 		kfree_skb(ifmgd->teardown_skb);
5065 		ifmgd->teardown_skb = NULL;
5066 		ifmgd->orig_teardown_skb = NULL;
5067 	}
5068 	spin_unlock_bh(&ifmgd->teardown_lock);
5069 	del_timer_sync(&ifmgd->timer);
5070 	sdata_unlock(sdata);
5071 }
5072 
5073 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5074 			       enum nl80211_cqm_rssi_threshold_event rssi_event,
5075 			       s32 rssi_level,
5076 			       gfp_t gfp)
5077 {
5078 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5079 
5080 	trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
5081 
5082 	cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
5083 }
5084 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5085 
5086 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5087 {
5088 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5089 
5090 	trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5091 
5092 	cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5093 }
5094 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);
5095