xref: /openbmc/linux/net/mac80211/mesh.c (revision e8e0929d)
1 /*
2  * Copyright (c) 2008 open80211s Ltd.
3  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
4  * 	       Javier Cardona <javier@cozybit.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #include <asm/unaligned.h>
12 #include "ieee80211_i.h"
13 #include "mesh.h"
14 
15 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
16 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
17 
18 #define PP_OFFSET 	1		/* Path Selection Protocol */
19 #define PM_OFFSET	5		/* Path Selection Metric   */
20 #define CC_OFFSET	9		/* Congestion Control Mode */
21 #define SP_OFFSET	13		/* Synchronization Protocol */
22 #define AUTH_OFFSET	17		/* Authentication Protocol */
23 #define CAPAB_OFFSET 	22
24 #define CAPAB_ACCEPT_PLINKS 0x80
25 #define CAPAB_FORWARDING    0x10
26 
27 #define TMR_RUNNING_HK	0
28 #define TMR_RUNNING_MP	1
29 
30 int mesh_allocated;
31 static struct kmem_cache *rm_cache;
32 
33 void ieee80211s_init(void)
34 {
35 	mesh_pathtbl_init();
36 	mesh_allocated = 1;
37 	rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
38 				     0, 0, NULL);
39 }
40 
41 void ieee80211s_stop(void)
42 {
43 	mesh_pathtbl_unregister();
44 	kmem_cache_destroy(rm_cache);
45 }
46 
47 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
48 {
49 	struct ieee80211_sub_if_data *sdata = (void *) data;
50 	struct ieee80211_local *local = sdata->local;
51 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
52 
53 	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
54 
55 	if (local->quiescing) {
56 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
57 		return;
58 	}
59 
60 	ieee80211_queue_work(&local->hw, &ifmsh->work);
61 }
62 
63 /**
64  * mesh_matches_local - check if the config of a mesh point matches ours
65  *
66  * @ie: information elements of a management frame from the mesh peer
67  * @sdata: local mesh subif
68  *
69  * This function checks if the mesh configuration of a mesh point matches the
70  * local mesh configuration, i.e. if both nodes belong to the same mesh network.
71  */
72 bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
73 {
74 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
75 
76 	/*
77 	 * As support for each feature is added, check for matching
78 	 * - On mesh config capabilities
79 	 *   - Power Save Support En
80 	 *   - Sync support enabled
81 	 *   - Sync support active
82 	 *   - Sync support required from peer
83 	 *   - MDA enabled
84 	 * - Power management control on fc
85 	 */
86 	if (ifmsh->mesh_id_len == ie->mesh_id_len &&
87 		memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
88 		memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
89 		memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
90 		memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
91 		memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
92 		memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
93 		return true;
94 
95 	return false;
96 }
97 
98 /**
99  * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
100  *
101  * @ie: information elements of a management frame from the mesh peer
102  */
103 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
104 {
105 	return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
106 }
107 
108 /**
109  * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
110  *
111  * @sdata: mesh interface in which mesh beacons are going to be updated
112  */
113 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
114 {
115 	bool free_plinks;
116 
117 	/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
118 	 * the mesh interface might be able to establish plinks with peers that
119 	 * are already on the table but are not on PLINK_ESTAB state. However,
120 	 * in general the mesh interface is not accepting peer link requests
121 	 * from new peers, and that must be reflected in the beacon
122 	 */
123 	free_plinks = mesh_plink_availables(sdata);
124 
125 	if (free_plinks != sdata->u.mesh.accepting_plinks)
126 		ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
127 }
128 
129 void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
130 {
131 	u8 oui[3] = {0x00, 0x0F, 0xAC};
132 
133 	memcpy(sta->mesh_pp_id, oui, sizeof(oui));
134 	memcpy(sta->mesh_pm_id, oui, sizeof(oui));
135 	memcpy(sta->mesh_cc_id, oui, sizeof(oui));
136 	memcpy(sta->mesh_sp_id, oui, sizeof(oui));
137 	memcpy(sta->mesh_auth_id, oui, sizeof(oui));
138 	sta->mesh_pp_id[sizeof(oui)] = 0;
139 	sta->mesh_pm_id[sizeof(oui)] = 0;
140 	sta->mesh_cc_id[sizeof(oui)] = 0xff;
141 	sta->mesh_sp_id[sizeof(oui)] = 0xff;
142 	sta->mesh_auth_id[sizeof(oui)] = 0x0;
143 }
144 
145 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
146 {
147 	int i;
148 
149 	sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
150 	if (!sdata->u.mesh.rmc)
151 		return -ENOMEM;
152 	sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
153 	for (i = 0; i < RMC_BUCKETS; i++)
154 		INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
155 	return 0;
156 }
157 
158 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
159 {
160 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
161 	struct rmc_entry *p, *n;
162 	int i;
163 
164 	if (!sdata->u.mesh.rmc)
165 		return;
166 
167 	for (i = 0; i < RMC_BUCKETS; i++)
168 		list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
169 			list_del(&p->list);
170 			kmem_cache_free(rm_cache, p);
171 		}
172 
173 	kfree(rmc);
174 	sdata->u.mesh.rmc = NULL;
175 }
176 
177 /**
178  * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
179  *
180  * @sa:		source address
181  * @mesh_hdr:	mesh_header
182  *
183  * Returns: 0 if the frame is not in the cache, nonzero otherwise.
184  *
185  * Checks using the source address and the mesh sequence number if we have
186  * received this frame lately. If the frame is not in the cache, it is added to
187  * it.
188  */
189 int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
190 		   struct ieee80211_sub_if_data *sdata)
191 {
192 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
193 	u32 seqnum = 0;
194 	int entries = 0;
195 	u8 idx;
196 	struct rmc_entry *p, *n;
197 
198 	/* Don't care about endianness since only match matters */
199 	memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
200 	idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
201 	list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
202 		++entries;
203 		if (time_after(jiffies, p->exp_time) ||
204 				(entries == RMC_QUEUE_MAX_LEN)) {
205 			list_del(&p->list);
206 			kmem_cache_free(rm_cache, p);
207 			--entries;
208 		} else if ((seqnum == p->seqnum)
209 				&& (memcmp(sa, p->sa, ETH_ALEN) == 0))
210 			return -1;
211 	}
212 
213 	p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
214 	if (!p) {
215 		printk(KERN_DEBUG "o11s: could not allocate RMC entry\n");
216 		return 0;
217 	}
218 	p->seqnum = seqnum;
219 	p->exp_time = jiffies + RMC_TIMEOUT;
220 	memcpy(p->sa, sa, ETH_ALEN);
221 	list_add(&p->list, &rmc->bucket[idx].list);
222 	return 0;
223 }
224 
225 void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
226 {
227 	struct ieee80211_local *local = sdata->local;
228 	struct ieee80211_supported_band *sband;
229 	u8 *pos;
230 	int len, i, rate;
231 
232 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
233 	len = sband->n_bitrates;
234 	if (len > 8)
235 		len = 8;
236 	pos = skb_put(skb, len + 2);
237 	*pos++ = WLAN_EID_SUPP_RATES;
238 	*pos++ = len;
239 	for (i = 0; i < len; i++) {
240 		rate = sband->bitrates[i].bitrate;
241 		*pos++ = (u8) (rate / 5);
242 	}
243 
244 	if (sband->n_bitrates > len) {
245 		pos = skb_put(skb, sband->n_bitrates - len + 2);
246 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
247 		*pos++ = sband->n_bitrates - len;
248 		for (i = len; i < sband->n_bitrates; i++) {
249 			rate = sband->bitrates[i].bitrate;
250 			*pos++ = (u8) (rate / 5);
251 		}
252 	}
253 
254 	pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
255 	*pos++ = WLAN_EID_MESH_ID;
256 	*pos++ = sdata->u.mesh.mesh_id_len;
257 	if (sdata->u.mesh.mesh_id_len)
258 		memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
259 
260 	pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
261 	*pos++ = WLAN_EID_MESH_CONFIG;
262 	*pos++ = IEEE80211_MESH_CONFIG_LEN;
263 	/* Version */
264 	*pos++ = 1;
265 
266 	/* Active path selection protocol ID */
267 	memcpy(pos, sdata->u.mesh.mesh_pp_id, 4);
268 	pos += 4;
269 
270 	/* Active path selection metric ID   */
271 	memcpy(pos, sdata->u.mesh.mesh_pm_id, 4);
272 	pos += 4;
273 
274 	/* Congestion control mode identifier */
275 	memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
276 	pos += 4;
277 
278 	/* Synchronization protocol identifier */
279 	memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
280 	pos += 4;
281 
282 	/* Authentication Protocol identifier */
283 	memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
284 	pos += 4;
285 
286 	/* Mesh Formation Info */
287 	memset(pos, 0x00, 1);
288 	pos += 1;
289 
290 	/* Mesh capability */
291 	sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
292 	*pos = CAPAB_FORWARDING;
293 	*pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
294 	*pos++ = 0x00;
295 
296 	return;
297 }
298 
299 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
300 {
301 	/* Use last four bytes of hw addr and interface index as hash index */
302 	return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
303 		& tbl->hash_mask;
304 }
305 
306 struct mesh_table *mesh_table_alloc(int size_order)
307 {
308 	int i;
309 	struct mesh_table *newtbl;
310 
311 	newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
312 	if (!newtbl)
313 		return NULL;
314 
315 	newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
316 			(1 << size_order), GFP_KERNEL);
317 
318 	if (!newtbl->hash_buckets) {
319 		kfree(newtbl);
320 		return NULL;
321 	}
322 
323 	newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
324 			(1 << size_order), GFP_KERNEL);
325 	if (!newtbl->hashwlock) {
326 		kfree(newtbl->hash_buckets);
327 		kfree(newtbl);
328 		return NULL;
329 	}
330 
331 	newtbl->size_order = size_order;
332 	newtbl->hash_mask = (1 << size_order) - 1;
333 	atomic_set(&newtbl->entries,  0);
334 	get_random_bytes(&newtbl->hash_rnd,
335 			sizeof(newtbl->hash_rnd));
336 	for (i = 0; i <= newtbl->hash_mask; i++)
337 		spin_lock_init(&newtbl->hashwlock[i]);
338 
339 	return newtbl;
340 }
341 
342 
343 static void ieee80211_mesh_path_timer(unsigned long data)
344 {
345 	struct ieee80211_sub_if_data *sdata =
346 		(struct ieee80211_sub_if_data *) data;
347 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
348 	struct ieee80211_local *local = sdata->local;
349 
350 	if (local->quiescing) {
351 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
352 		return;
353 	}
354 
355 	ieee80211_queue_work(&local->hw, &ifmsh->work);
356 }
357 
358 /**
359  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
360  * @hdr:    	802.11 frame header
361  * @fc:		frame control field
362  * @meshda:	destination address in the mesh
363  * @meshsa:	source address address in the mesh.  Same as TA, as frame is
364  *              locally originated.
365  *
366  * Return the length of the 802.11 (does not include a mesh control header)
367  */
368 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, char
369 		*meshda, char *meshsa) {
370 	if (is_multicast_ether_addr(meshda)) {
371 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
372 		/* DA TA SA */
373 		memcpy(hdr->addr1, meshda, ETH_ALEN);
374 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
375 		memcpy(hdr->addr3, meshsa, ETH_ALEN);
376 		return 24;
377 	} else {
378 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
379 				IEEE80211_FCTL_TODS);
380 		/* RA TA DA SA */
381 		memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */
382 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
383 		memcpy(hdr->addr3, meshda, ETH_ALEN);
384 		memcpy(hdr->addr4, meshsa, ETH_ALEN);
385 		return 30;
386 	}
387 }
388 
389 /**
390  * ieee80211_new_mesh_header - create a new mesh header
391  * @meshhdr:    uninitialized mesh header
392  * @sdata:	mesh interface to be used
393  * @addr4:	addr4 of the mesh frame (1st in ae header)
394  *              may be NULL
395  * @addr5:	addr5 of the mesh frame (1st or 2nd in ae header)
396  *              may be NULL unless addr6 is present
397  * @addr6:	addr6 of the mesh frame (2nd or 3rd in ae header)
398  * 		may be NULL unless addr5 is present
399  *
400  * Return the header length.
401  */
402 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
403 		struct ieee80211_sub_if_data *sdata, char *addr4,
404 		char *addr5, char *addr6)
405 {
406 	int aelen = 0;
407 	memset(meshhdr, 0, sizeof(meshhdr));
408 	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
409 	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
410 	sdata->u.mesh.mesh_seqnum++;
411 	if (addr4) {
412 		meshhdr->flags |= MESH_FLAGS_AE_A4;
413 		aelen += ETH_ALEN;
414 		memcpy(meshhdr->eaddr1, addr4, ETH_ALEN);
415 	}
416 	if (addr5 && addr6) {
417 		meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
418 		aelen += 2 * ETH_ALEN;
419 		if (!addr4) {
420 			memcpy(meshhdr->eaddr1, addr5, ETH_ALEN);
421 			memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
422 		} else {
423 			memcpy(meshhdr->eaddr2, addr5, ETH_ALEN);
424 			memcpy(meshhdr->eaddr3, addr6, ETH_ALEN);
425 		}
426 	}
427 	return 6 + aelen;
428 }
429 
430 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
431 			   struct ieee80211_if_mesh *ifmsh)
432 {
433 	bool free_plinks;
434 
435 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
436 	printk(KERN_DEBUG "%s: running mesh housekeeping\n",
437 	       sdata->dev->name);
438 #endif
439 
440 	ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
441 	mesh_path_expire(sdata);
442 
443 	free_plinks = mesh_plink_availables(sdata);
444 	if (free_plinks != sdata->u.mesh.accepting_plinks)
445 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
446 
447 	mod_timer(&ifmsh->housekeeping_timer,
448 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
449 }
450 
451 #ifdef CONFIG_PM
452 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
453 {
454 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
455 
456 	/* might restart the timer but that doesn't matter */
457 	cancel_work_sync(&ifmsh->work);
458 
459 	/* use atomic bitops in case both timers fire at the same time */
460 
461 	if (del_timer_sync(&ifmsh->housekeeping_timer))
462 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
463 	if (del_timer_sync(&ifmsh->mesh_path_timer))
464 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
465 }
466 
467 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
468 {
469 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
470 
471 	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
472 		add_timer(&ifmsh->housekeeping_timer);
473 	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
474 		add_timer(&ifmsh->mesh_path_timer);
475 }
476 #endif
477 
478 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
479 {
480 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
481 	struct ieee80211_local *local = sdata->local;
482 
483 	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
484 	ieee80211_queue_work(&local->hw, &ifmsh->work);
485 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
486 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
487 						BSS_CHANGED_BEACON_ENABLED |
488 						BSS_CHANGED_BEACON_INT);
489 }
490 
491 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
492 {
493 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
494 	/*
495 	 * If the timer fired while we waited for it, it will have
496 	 * requeued the work. Now the work will be running again
497 	 * but will not rearm the timer again because it checks
498 	 * whether the interface is running, which, at this point,
499 	 * it no longer is.
500 	 */
501 	cancel_work_sync(&sdata->u.mesh.work);
502 
503 	/*
504 	 * When we get here, the interface is marked down.
505 	 * Call synchronize_rcu() to wait for the RX path
506 	 * should it be using the interface and enqueuing
507 	 * frames at this very time on another CPU.
508 	 */
509 	rcu_barrier(); /* Wait for RX path and call_rcu()'s */
510 	skb_queue_purge(&sdata->u.mesh.skb_queue);
511 }
512 
513 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
514 					u16 stype,
515 					struct ieee80211_mgmt *mgmt,
516 					size_t len,
517 					struct ieee80211_rx_status *rx_status)
518 {
519 	struct ieee80211_local *local = sdata->local;
520 	struct ieee802_11_elems elems;
521 	struct ieee80211_channel *channel;
522 	u32 supp_rates = 0;
523 	size_t baselen;
524 	int freq;
525 	enum ieee80211_band band = rx_status->band;
526 
527 	/* ignore ProbeResp to foreign address */
528 	if (stype == IEEE80211_STYPE_PROBE_RESP &&
529 	    compare_ether_addr(mgmt->da, sdata->dev->dev_addr))
530 		return;
531 
532 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
533 	if (baselen > len)
534 		return;
535 
536 	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
537 			       &elems);
538 
539 	if (elems.ds_params && elems.ds_params_len == 1)
540 		freq = ieee80211_channel_to_frequency(elems.ds_params[0]);
541 	else
542 		freq = rx_status->freq;
543 
544 	channel = ieee80211_get_channel(local->hw.wiphy, freq);
545 
546 	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
547 		return;
548 
549 	if (elems.mesh_id && elems.mesh_config &&
550 	    mesh_matches_local(&elems, sdata)) {
551 		supp_rates = ieee80211_sta_get_rates(local, &elems, band);
552 
553 		mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
554 				      mesh_peer_accepts_plinks(&elems));
555 	}
556 }
557 
558 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
559 					  struct ieee80211_mgmt *mgmt,
560 					  size_t len,
561 					  struct ieee80211_rx_status *rx_status)
562 {
563 	switch (mgmt->u.action.category) {
564 	case PLINK_CATEGORY:
565 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
566 		break;
567 	case MESH_PATH_SEL_CATEGORY:
568 		mesh_rx_path_sel_frame(sdata, mgmt, len);
569 		break;
570 	}
571 }
572 
573 static void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
574 					  struct sk_buff *skb)
575 {
576 	struct ieee80211_rx_status *rx_status;
577 	struct ieee80211_if_mesh *ifmsh;
578 	struct ieee80211_mgmt *mgmt;
579 	u16 stype;
580 
581 	ifmsh = &sdata->u.mesh;
582 
583 	rx_status = IEEE80211_SKB_RXCB(skb);
584 	mgmt = (struct ieee80211_mgmt *) skb->data;
585 	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
586 
587 	switch (stype) {
588 	case IEEE80211_STYPE_PROBE_RESP:
589 	case IEEE80211_STYPE_BEACON:
590 		ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
591 					    rx_status);
592 		break;
593 	case IEEE80211_STYPE_ACTION:
594 		ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
595 		break;
596 	}
597 
598 	kfree_skb(skb);
599 }
600 
601 static void ieee80211_mesh_work(struct work_struct *work)
602 {
603 	struct ieee80211_sub_if_data *sdata =
604 		container_of(work, struct ieee80211_sub_if_data, u.mesh.work);
605 	struct ieee80211_local *local = sdata->local;
606 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
607 	struct sk_buff *skb;
608 
609 	if (!netif_running(sdata->dev))
610 		return;
611 
612 	if (local->scanning)
613 		return;
614 
615 	while ((skb = skb_dequeue(&ifmsh->skb_queue)))
616 		ieee80211_mesh_rx_queued_mgmt(sdata, skb);
617 
618 	if (ifmsh->preq_queue_len &&
619 	    time_after(jiffies,
620 		       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
621 		mesh_path_start_discovery(sdata);
622 
623 	if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
624 		mesh_mpath_table_grow();
625 
626 	if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
627 		mesh_mpp_table_grow();
628 
629 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
630 		ieee80211_mesh_housekeeping(sdata, ifmsh);
631 }
632 
633 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
634 {
635 	struct ieee80211_sub_if_data *sdata;
636 
637 	rcu_read_lock();
638 	list_for_each_entry_rcu(sdata, &local->interfaces, list)
639 		if (ieee80211_vif_is_mesh(&sdata->vif))
640 			ieee80211_queue_work(&local->hw, &sdata->u.mesh.work);
641 	rcu_read_unlock();
642 }
643 
644 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
645 {
646 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
647 
648 	INIT_WORK(&ifmsh->work, ieee80211_mesh_work);
649 	setup_timer(&ifmsh->housekeeping_timer,
650 		    ieee80211_mesh_housekeeping_timer,
651 		    (unsigned long) sdata);
652 	skb_queue_head_init(&sdata->u.mesh.skb_queue);
653 
654 	ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T;
655 	ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T;
656 	ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T;
657 	ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR;
658 	ifmsh->mshcfg.dot11MeshTTL = MESH_TTL;
659 	ifmsh->mshcfg.auto_open_plinks = true;
660 	ifmsh->mshcfg.dot11MeshMaxPeerLinks =
661 		MESH_MAX_ESTAB_PLINKS;
662 	ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout =
663 		MESH_PATH_TIMEOUT;
664 	ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval =
665 		MESH_PREQ_MIN_INT;
666 	ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime =
667 		MESH_DIAM_TRAVERSAL_TIME;
668 	ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries =
669 		MESH_MAX_PREQ_RETRIES;
670 	ifmsh->mshcfg.path_refresh_time =
671 		MESH_PATH_REFRESH_TIME;
672 	ifmsh->mshcfg.min_discovery_timeout =
673 		MESH_MIN_DISCOVERY_TIMEOUT;
674 	ifmsh->accepting_plinks = true;
675 	ifmsh->preq_id = 0;
676 	ifmsh->dsn = 0;
677 	atomic_set(&ifmsh->mpaths, 0);
678 	mesh_rmc_init(sdata);
679 	ifmsh->last_preq = jiffies;
680 	/* Allocate all mesh structures when creating the first mesh interface. */
681 	if (!mesh_allocated)
682 		ieee80211s_init();
683 	mesh_ids_set_default(ifmsh);
684 	setup_timer(&ifmsh->mesh_path_timer,
685 		    ieee80211_mesh_path_timer,
686 		    (unsigned long) sdata);
687 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
688 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
689 }
690 
691 ieee80211_rx_result
692 ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
693 {
694 	struct ieee80211_local *local = sdata->local;
695 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
696 	struct ieee80211_mgmt *mgmt;
697 	u16 fc;
698 
699 	if (skb->len < 24)
700 		return RX_DROP_MONITOR;
701 
702 	mgmt = (struct ieee80211_mgmt *) skb->data;
703 	fc = le16_to_cpu(mgmt->frame_control);
704 
705 	switch (fc & IEEE80211_FCTL_STYPE) {
706 	case IEEE80211_STYPE_ACTION:
707 		if (skb->len < IEEE80211_MIN_ACTION_SIZE)
708 			return RX_DROP_MONITOR;
709 		/* fall through */
710 	case IEEE80211_STYPE_PROBE_RESP:
711 	case IEEE80211_STYPE_BEACON:
712 		skb_queue_tail(&ifmsh->skb_queue, skb);
713 		ieee80211_queue_work(&local->hw, &ifmsh->work);
714 		return RX_QUEUED;
715 	}
716 
717 	return RX_CONTINUE;
718 }
719