xref: /openbmc/linux/net/mac80211/mesh.c (revision 5d0e4d78)
1 /*
2  * Copyright (c) 2008, 2009 open80211s Ltd.
3  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
4  * 	       Javier Cardona <javier@cozybit.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
14 #include "mesh.h"
15 #include "driver-ops.h"
16 
17 static int mesh_allocated;
18 static struct kmem_cache *rm_cache;
19 
20 bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
21 {
22 	return (mgmt->u.action.u.mesh_action.action_code ==
23 			WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
24 }
25 
26 void ieee80211s_init(void)
27 {
28 	mesh_allocated = 1;
29 	rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
30 				     0, 0, NULL);
31 }
32 
33 void ieee80211s_stop(void)
34 {
35 	if (!mesh_allocated)
36 		return;
37 	kmem_cache_destroy(rm_cache);
38 }
39 
40 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
41 {
42 	struct ieee80211_sub_if_data *sdata = (void *) data;
43 	struct ieee80211_local *local = sdata->local;
44 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
45 
46 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
47 
48 	ieee80211_queue_work(&local->hw, &sdata->work);
49 }
50 
51 /**
52  * mesh_matches_local - check if the config of a mesh point matches ours
53  *
54  * @sdata: local mesh subif
55  * @ie: information elements of a management frame from the mesh peer
56  *
57  * This function checks if the mesh configuration of a mesh point matches the
58  * local mesh configuration, i.e. if both nodes belong to the same mesh network.
59  */
60 bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
61 			struct ieee802_11_elems *ie)
62 {
63 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
64 	u32 basic_rates = 0;
65 	struct cfg80211_chan_def sta_chan_def;
66 	struct ieee80211_supported_band *sband;
67 
68 	/*
69 	 * As support for each feature is added, check for matching
70 	 * - On mesh config capabilities
71 	 *   - Power Save Support En
72 	 *   - Sync support enabled
73 	 *   - Sync support active
74 	 *   - Sync support required from peer
75 	 *   - MDA enabled
76 	 * - Power management control on fc
77 	 */
78 	if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
79 	     memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
80 	     (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
81 	     (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
82 	     (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
83 	     (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
84 	     (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
85 		return false;
86 
87 	sband = ieee80211_get_sband(sdata);
88 	if (!sband)
89 		return false;
90 
91 	ieee80211_sta_get_rates(sdata, ie, sband->band,
92 				&basic_rates);
93 
94 	if (sdata->vif.bss_conf.basic_rates != basic_rates)
95 		return false;
96 
97 	cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chandef.chan,
98 				NL80211_CHAN_NO_HT);
99 	ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def);
100 	ieee80211_chandef_vht_oper(ie->vht_operation, &sta_chan_def);
101 
102 	if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
103 					 &sta_chan_def))
104 		return false;
105 
106 	return true;
107 }
108 
109 /**
110  * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
111  *
112  * @ie: information elements of a management frame from the mesh peer
113  */
114 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
115 {
116 	return (ie->mesh_config->meshconf_cap &
117 			IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
118 }
119 
120 /**
121  * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
122  *
123  * @sdata: mesh interface in which mesh beacons are going to be updated
124  *
125  * Returns: beacon changed flag if the beacon content changed.
126  */
127 u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
128 {
129 	bool free_plinks;
130 	u32 changed = 0;
131 
132 	/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
133 	 * the mesh interface might be able to establish plinks with peers that
134 	 * are already on the table but are not on PLINK_ESTAB state. However,
135 	 * in general the mesh interface is not accepting peer link requests
136 	 * from new peers, and that must be reflected in the beacon
137 	 */
138 	free_plinks = mesh_plink_availables(sdata);
139 
140 	if (free_plinks != sdata->u.mesh.accepting_plinks) {
141 		sdata->u.mesh.accepting_plinks = free_plinks;
142 		changed = BSS_CHANGED_BEACON;
143 	}
144 
145 	return changed;
146 }
147 
148 /*
149  * mesh_sta_cleanup - clean up any mesh sta state
150  *
151  * @sta: mesh sta to clean up.
152  */
153 void mesh_sta_cleanup(struct sta_info *sta)
154 {
155 	struct ieee80211_sub_if_data *sdata = sta->sdata;
156 	u32 changed = mesh_plink_deactivate(sta);
157 
158 	if (changed)
159 		ieee80211_mbss_info_change_notify(sdata, changed);
160 }
161 
162 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
163 {
164 	int i;
165 
166 	sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
167 	if (!sdata->u.mesh.rmc)
168 		return -ENOMEM;
169 	sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
170 	for (i = 0; i < RMC_BUCKETS; i++)
171 		INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
172 	return 0;
173 }
174 
175 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
176 {
177 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
178 	struct rmc_entry *p;
179 	struct hlist_node *n;
180 	int i;
181 
182 	if (!sdata->u.mesh.rmc)
183 		return;
184 
185 	for (i = 0; i < RMC_BUCKETS; i++) {
186 		hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
187 			hlist_del(&p->list);
188 			kmem_cache_free(rm_cache, p);
189 		}
190 	}
191 
192 	kfree(rmc);
193 	sdata->u.mesh.rmc = NULL;
194 }
195 
196 /**
197  * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
198  *
199  * @sdata:	interface
200  * @sa:		source address
201  * @mesh_hdr:	mesh_header
202  *
203  * Returns: 0 if the frame is not in the cache, nonzero otherwise.
204  *
205  * Checks using the source address and the mesh sequence number if we have
206  * received this frame lately. If the frame is not in the cache, it is added to
207  * it.
208  */
209 int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
210 		   const u8 *sa, struct ieee80211s_hdr *mesh_hdr)
211 {
212 	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
213 	u32 seqnum = 0;
214 	int entries = 0;
215 	u8 idx;
216 	struct rmc_entry *p;
217 	struct hlist_node *n;
218 
219 	if (!rmc)
220 		return -1;
221 
222 	/* Don't care about endianness since only match matters */
223 	memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
224 	idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
225 	hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
226 		++entries;
227 		if (time_after(jiffies, p->exp_time) ||
228 		    entries == RMC_QUEUE_MAX_LEN) {
229 			hlist_del(&p->list);
230 			kmem_cache_free(rm_cache, p);
231 			--entries;
232 		} else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa))
233 			return -1;
234 	}
235 
236 	p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
237 	if (!p)
238 		return 0;
239 
240 	p->seqnum = seqnum;
241 	p->exp_time = jiffies + RMC_TIMEOUT;
242 	memcpy(p->sa, sa, ETH_ALEN);
243 	hlist_add_head(&p->list, &rmc->bucket[idx]);
244 	return 0;
245 }
246 
247 int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
248 			 struct sk_buff *skb)
249 {
250 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
251 	u8 *pos, neighbors;
252 	u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
253 
254 	if (skb_tailroom(skb) < 2 + meshconf_len)
255 		return -ENOMEM;
256 
257 	pos = skb_put(skb, 2 + meshconf_len);
258 	*pos++ = WLAN_EID_MESH_CONFIG;
259 	*pos++ = meshconf_len;
260 
261 	/* save a pointer for quick updates in pre-tbtt */
262 	ifmsh->meshconf_offset = pos - skb->data;
263 
264 	/* Active path selection protocol ID */
265 	*pos++ = ifmsh->mesh_pp_id;
266 	/* Active path selection metric ID   */
267 	*pos++ = ifmsh->mesh_pm_id;
268 	/* Congestion control mode identifier */
269 	*pos++ = ifmsh->mesh_cc_id;
270 	/* Synchronization protocol identifier */
271 	*pos++ = ifmsh->mesh_sp_id;
272 	/* Authentication Protocol identifier */
273 	*pos++ = ifmsh->mesh_auth_id;
274 	/* Mesh Formation Info - number of neighbors */
275 	neighbors = atomic_read(&ifmsh->estab_plinks);
276 	neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS);
277 	*pos++ = neighbors << 1;
278 	/* Mesh capability */
279 	*pos = 0x00;
280 	*pos |= ifmsh->mshcfg.dot11MeshForwarding ?
281 			IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00;
282 	*pos |= ifmsh->accepting_plinks ?
283 			IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
284 	/* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
285 	*pos |= ifmsh->ps_peers_deep_sleep ?
286 			IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
287 	return 0;
288 }
289 
290 int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
291 {
292 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
293 	u8 *pos;
294 
295 	if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
296 		return -ENOMEM;
297 
298 	pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
299 	*pos++ = WLAN_EID_MESH_ID;
300 	*pos++ = ifmsh->mesh_id_len;
301 	if (ifmsh->mesh_id_len)
302 		memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
303 
304 	return 0;
305 }
306 
307 static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata,
308 				    struct sk_buff *skb)
309 {
310 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
311 	u8 *pos;
312 
313 	/* see IEEE802.11-2012 13.14.6 */
314 	if (ifmsh->ps_peers_light_sleep == 0 &&
315 	    ifmsh->ps_peers_deep_sleep == 0 &&
316 	    ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
317 		return 0;
318 
319 	if (skb_tailroom(skb) < 4)
320 		return -ENOMEM;
321 
322 	pos = skb_put(skb, 2 + 2);
323 	*pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
324 	*pos++ = 2;
325 	put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
326 
327 	return 0;
328 }
329 
330 int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
331 			struct sk_buff *skb)
332 {
333 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
334 	u8 offset, len;
335 	const u8 *data;
336 
337 	if (!ifmsh->ie || !ifmsh->ie_len)
338 		return 0;
339 
340 	/* fast-forward to vendor IEs */
341 	offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
342 
343 	if (offset < ifmsh->ie_len) {
344 		len = ifmsh->ie_len - offset;
345 		data = ifmsh->ie + offset;
346 		if (skb_tailroom(skb) < len)
347 			return -ENOMEM;
348 		skb_put_data(skb, data, len);
349 	}
350 
351 	return 0;
352 }
353 
354 int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
355 {
356 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
357 	u8 len = 0;
358 	const u8 *data;
359 
360 	if (!ifmsh->ie || !ifmsh->ie_len)
361 		return 0;
362 
363 	/* find RSN IE */
364 	data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len);
365 	if (!data)
366 		return 0;
367 
368 	len = data[1] + 2;
369 
370 	if (skb_tailroom(skb) < len)
371 		return -ENOMEM;
372 	skb_put_data(skb, data, len);
373 
374 	return 0;
375 }
376 
377 static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata,
378 				 struct sk_buff *skb)
379 {
380 	struct ieee80211_chanctx_conf *chanctx_conf;
381 	struct ieee80211_channel *chan;
382 	u8 *pos;
383 
384 	if (skb_tailroom(skb) < 3)
385 		return -ENOMEM;
386 
387 	rcu_read_lock();
388 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
389 	if (WARN_ON(!chanctx_conf)) {
390 		rcu_read_unlock();
391 		return -EINVAL;
392 	}
393 	chan = chanctx_conf->def.chan;
394 	rcu_read_unlock();
395 
396 	pos = skb_put(skb, 2 + 1);
397 	*pos++ = WLAN_EID_DS_PARAMS;
398 	*pos++ = 1;
399 	*pos++ = ieee80211_frequency_to_channel(chan->center_freq);
400 
401 	return 0;
402 }
403 
404 int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
405 		       struct sk_buff *skb)
406 {
407 	struct ieee80211_supported_band *sband;
408 	u8 *pos;
409 
410 	sband = ieee80211_get_sband(sdata);
411 	if (!sband)
412 		return -EINVAL;
413 
414 	if (!sband->ht_cap.ht_supported ||
415 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
416 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
417 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
418 		return 0;
419 
420 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
421 		return -ENOMEM;
422 
423 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
424 	ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
425 
426 	return 0;
427 }
428 
429 int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
430 			struct sk_buff *skb)
431 {
432 	struct ieee80211_local *local = sdata->local;
433 	struct ieee80211_chanctx_conf *chanctx_conf;
434 	struct ieee80211_channel *channel;
435 	struct ieee80211_supported_band *sband;
436 	struct ieee80211_sta_ht_cap *ht_cap;
437 	u8 *pos;
438 
439 	rcu_read_lock();
440 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
441 	if (WARN_ON(!chanctx_conf)) {
442 		rcu_read_unlock();
443 		return -EINVAL;
444 	}
445 	channel = chanctx_conf->def.chan;
446 	rcu_read_unlock();
447 
448 	sband = local->hw.wiphy->bands[channel->band];
449 	ht_cap = &sband->ht_cap;
450 
451 	if (!ht_cap->ht_supported ||
452 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
453 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
454 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
455 		return 0;
456 
457 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
458 		return -ENOMEM;
459 
460 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
461 	ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
462 				   sdata->vif.bss_conf.ht_operation_mode,
463 				   false);
464 
465 	return 0;
466 }
467 
468 int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
469 			struct sk_buff *skb)
470 {
471 	struct ieee80211_supported_band *sband;
472 	u8 *pos;
473 
474 	sband = ieee80211_get_sband(sdata);
475 	if (!sband)
476 		return -EINVAL;
477 
478 	if (!sband->vht_cap.vht_supported ||
479 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
480 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
481 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
482 		return 0;
483 
484 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap))
485 		return -ENOMEM;
486 
487 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap));
488 	ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap);
489 
490 	return 0;
491 }
492 
493 int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
494 			 struct sk_buff *skb)
495 {
496 	struct ieee80211_local *local = sdata->local;
497 	struct ieee80211_chanctx_conf *chanctx_conf;
498 	struct ieee80211_channel *channel;
499 	struct ieee80211_supported_band *sband;
500 	struct ieee80211_sta_vht_cap *vht_cap;
501 	u8 *pos;
502 
503 	rcu_read_lock();
504 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
505 	if (WARN_ON(!chanctx_conf)) {
506 		rcu_read_unlock();
507 		return -EINVAL;
508 	}
509 	channel = chanctx_conf->def.chan;
510 	rcu_read_unlock();
511 
512 	sband = local->hw.wiphy->bands[channel->band];
513 	vht_cap = &sband->vht_cap;
514 
515 	if (!vht_cap->vht_supported ||
516 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
517 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
518 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
519 		return 0;
520 
521 	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation))
522 		return -ENOMEM;
523 
524 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation));
525 	ieee80211_ie_build_vht_oper(pos, vht_cap,
526 				    &sdata->vif.bss_conf.chandef);
527 
528 	return 0;
529 }
530 
531 static void ieee80211_mesh_path_timer(unsigned long data)
532 {
533 	struct ieee80211_sub_if_data *sdata =
534 		(struct ieee80211_sub_if_data *) data;
535 
536 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
537 }
538 
539 static void ieee80211_mesh_path_root_timer(unsigned long data)
540 {
541 	struct ieee80211_sub_if_data *sdata =
542 		(struct ieee80211_sub_if_data *) data;
543 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
544 
545 	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
546 
547 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
548 }
549 
550 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
551 {
552 	if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
553 		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
554 	else {
555 		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
556 		/* stop running timer */
557 		del_timer_sync(&ifmsh->mesh_path_root_timer);
558 	}
559 }
560 
561 /**
562  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
563  * @hdr:	802.11 frame header
564  * @fc:		frame control field
565  * @meshda:	destination address in the mesh
566  * @meshsa:	source address address in the mesh.  Same as TA, as frame is
567  *              locally originated.
568  *
569  * Return the length of the 802.11 (does not include a mesh control header)
570  */
571 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
572 				  const u8 *meshda, const u8 *meshsa)
573 {
574 	if (is_multicast_ether_addr(meshda)) {
575 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
576 		/* DA TA SA */
577 		memcpy(hdr->addr1, meshda, ETH_ALEN);
578 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
579 		memcpy(hdr->addr3, meshsa, ETH_ALEN);
580 		return 24;
581 	} else {
582 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
583 		/* RA TA DA SA */
584 		eth_zero_addr(hdr->addr1);   /* RA is resolved later */
585 		memcpy(hdr->addr2, meshsa, ETH_ALEN);
586 		memcpy(hdr->addr3, meshda, ETH_ALEN);
587 		memcpy(hdr->addr4, meshsa, ETH_ALEN);
588 		return 30;
589 	}
590 }
591 
592 /**
593  * ieee80211_new_mesh_header - create a new mesh header
594  * @sdata:	mesh interface to be used
595  * @meshhdr:    uninitialized mesh header
596  * @addr4or5:   1st address in the ae header, which may correspond to address 4
597  *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
598  *              be NULL.
599  * @addr6:	2nd address in the ae header, which corresponds to addr6 of the
600  *              mesh frame
601  *
602  * Return the header length.
603  */
604 unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
605 				       struct ieee80211s_hdr *meshhdr,
606 				       const char *addr4or5, const char *addr6)
607 {
608 	if (WARN_ON(!addr4or5 && addr6))
609 		return 0;
610 
611 	memset(meshhdr, 0, sizeof(*meshhdr));
612 
613 	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
614 
615 	/* FIXME: racy -- TX on multiple queues can be concurrent */
616 	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
617 	sdata->u.mesh.mesh_seqnum++;
618 
619 	if (addr4or5 && !addr6) {
620 		meshhdr->flags |= MESH_FLAGS_AE_A4;
621 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
622 		return 2 * ETH_ALEN;
623 	} else if (addr4or5 && addr6) {
624 		meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
625 		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
626 		memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
627 		return 3 * ETH_ALEN;
628 	}
629 
630 	return ETH_ALEN;
631 }
632 
633 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata)
634 {
635 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
636 	u32 changed;
637 
638 	if (ifmsh->mshcfg.plink_timeout > 0)
639 		ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ);
640 	mesh_path_expire(sdata);
641 
642 	changed = mesh_accept_plinks_update(sdata);
643 	ieee80211_mbss_info_change_notify(sdata, changed);
644 
645 	mod_timer(&ifmsh->housekeeping_timer,
646 		  round_jiffies(jiffies +
647 				IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
648 }
649 
650 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
651 {
652 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
653 	u32 interval;
654 
655 	mesh_path_tx_root_frame(sdata);
656 
657 	if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
658 		interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
659 	else
660 		interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
661 
662 	mod_timer(&ifmsh->mesh_path_root_timer,
663 		  round_jiffies(TU_TO_EXP_TIME(interval)));
664 }
665 
666 static int
667 ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
668 {
669 	struct beacon_data *bcn;
670 	int head_len, tail_len;
671 	struct sk_buff *skb;
672 	struct ieee80211_mgmt *mgmt;
673 	struct ieee80211_chanctx_conf *chanctx_conf;
674 	struct mesh_csa_settings *csa;
675 	enum nl80211_band band;
676 	u8 *pos;
677 	struct ieee80211_sub_if_data *sdata;
678 	int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) +
679 		      sizeof(mgmt->u.beacon);
680 
681 	sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh);
682 	rcu_read_lock();
683 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
684 	band = chanctx_conf->def.chan->band;
685 	rcu_read_unlock();
686 
687 	head_len = hdr_len +
688 		   2 + /* NULL SSID */
689 		   /* Channel Switch Announcement */
690 		   2 + sizeof(struct ieee80211_channel_sw_ie) +
691 		   /* Mesh Channel Switch Parameters */
692 		   2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
693 		   /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
694 		   2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) +
695 		   2 + sizeof(struct ieee80211_sec_chan_offs_ie) +
696 		   2 + 8 + /* supported rates */
697 		   2 + 3; /* DS params */
698 	tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
699 		   2 + sizeof(struct ieee80211_ht_cap) +
700 		   2 + sizeof(struct ieee80211_ht_operation) +
701 		   2 + ifmsh->mesh_id_len +
702 		   2 + sizeof(struct ieee80211_meshconf_ie) +
703 		   2 + sizeof(__le16) + /* awake window */
704 		   2 + sizeof(struct ieee80211_vht_cap) +
705 		   2 + sizeof(struct ieee80211_vht_operation) +
706 		   ifmsh->ie_len;
707 
708 	bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
709 	/* need an skb for IE builders to operate on */
710 	skb = dev_alloc_skb(max(head_len, tail_len));
711 
712 	if (!bcn || !skb)
713 		goto out_free;
714 
715 	/*
716 	 * pointers go into the block we allocated,
717 	 * memory is | beacon_data | head | tail |
718 	 */
719 	bcn->head = ((u8 *) bcn) + sizeof(*bcn);
720 
721 	/* fill in the head */
722 	mgmt = skb_put_zero(skb, hdr_len);
723 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
724 					  IEEE80211_STYPE_BEACON);
725 	eth_broadcast_addr(mgmt->da);
726 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
727 	memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
728 	ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
729 	mgmt->u.beacon.beacon_int =
730 		cpu_to_le16(sdata->vif.bss_conf.beacon_int);
731 	mgmt->u.beacon.capab_info |= cpu_to_le16(
732 		sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0);
733 
734 	pos = skb_put(skb, 2);
735 	*pos++ = WLAN_EID_SSID;
736 	*pos++ = 0x0;
737 
738 	rcu_read_lock();
739 	csa = rcu_dereference(ifmsh->csa);
740 	if (csa) {
741 		enum nl80211_channel_type ct;
742 		struct cfg80211_chan_def *chandef;
743 		int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) +
744 			     2 + sizeof(struct ieee80211_mesh_chansw_params_ie);
745 
746 		pos = skb_put_zero(skb, ie_len);
747 		*pos++ = WLAN_EID_CHANNEL_SWITCH;
748 		*pos++ = 3;
749 		*pos++ = 0x0;
750 		*pos++ = ieee80211_frequency_to_channel(
751 				csa->settings.chandef.chan->center_freq);
752 		bcn->csa_current_counter = csa->settings.count;
753 		bcn->csa_counter_offsets[0] = hdr_len + 6;
754 		*pos++ = csa->settings.count;
755 		*pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
756 		*pos++ = 6;
757 		if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) {
758 			*pos++ = ifmsh->mshcfg.dot11MeshTTL;
759 			*pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
760 		} else {
761 			*pos++ = ifmsh->chsw_ttl;
762 		}
763 		*pos++ |= csa->settings.block_tx ?
764 			  WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
765 		put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
766 		pos += 2;
767 		put_unaligned_le16(ifmsh->pre_value, pos);
768 		pos += 2;
769 
770 		switch (csa->settings.chandef.width) {
771 		case NL80211_CHAN_WIDTH_40:
772 			ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie);
773 			pos = skb_put_zero(skb, ie_len);
774 
775 			*pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */
776 			*pos++ = 1;				    /* len */
777 			ct = cfg80211_get_chandef_type(&csa->settings.chandef);
778 			if (ct == NL80211_CHAN_HT40PLUS)
779 				*pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
780 			else
781 				*pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
782 			break;
783 		case NL80211_CHAN_WIDTH_80:
784 		case NL80211_CHAN_WIDTH_80P80:
785 		case NL80211_CHAN_WIDTH_160:
786 			/* Channel Switch Wrapper + Wide Bandwidth CSA IE */
787 			ie_len = 2 + 2 +
788 				 sizeof(struct ieee80211_wide_bw_chansw_ie);
789 			pos = skb_put_zero(skb, ie_len);
790 
791 			*pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */
792 			*pos++ = 5;				  /* len */
793 			/* put sub IE */
794 			chandef = &csa->settings.chandef;
795 			ieee80211_ie_build_wide_bw_cs(pos, chandef);
796 			break;
797 		default:
798 			break;
799 		}
800 	}
801 	rcu_read_unlock();
802 
803 	if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
804 	    mesh_add_ds_params_ie(sdata, skb))
805 		goto out_free;
806 
807 	bcn->head_len = skb->len;
808 	memcpy(bcn->head, skb->data, bcn->head_len);
809 
810 	/* now the tail */
811 	skb_trim(skb, 0);
812 	bcn->tail = bcn->head + bcn->head_len;
813 
814 	if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
815 	    mesh_add_rsn_ie(sdata, skb) ||
816 	    mesh_add_ht_cap_ie(sdata, skb) ||
817 	    mesh_add_ht_oper_ie(sdata, skb) ||
818 	    mesh_add_meshid_ie(sdata, skb) ||
819 	    mesh_add_meshconf_ie(sdata, skb) ||
820 	    mesh_add_awake_window_ie(sdata, skb) ||
821 	    mesh_add_vht_cap_ie(sdata, skb) ||
822 	    mesh_add_vht_oper_ie(sdata, skb) ||
823 	    mesh_add_vendor_ies(sdata, skb))
824 		goto out_free;
825 
826 	bcn->tail_len = skb->len;
827 	memcpy(bcn->tail, skb->data, bcn->tail_len);
828 	bcn->meshconf = (struct ieee80211_meshconf_ie *)
829 					(bcn->tail + ifmsh->meshconf_offset);
830 
831 	dev_kfree_skb(skb);
832 	rcu_assign_pointer(ifmsh->beacon, bcn);
833 	return 0;
834 out_free:
835 	kfree(bcn);
836 	dev_kfree_skb(skb);
837 	return -ENOMEM;
838 }
839 
840 static int
841 ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata)
842 {
843 	struct beacon_data *old_bcn;
844 	int ret;
845 
846 	old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon,
847 					    lockdep_is_held(&sdata->wdev.mtx));
848 	ret = ieee80211_mesh_build_beacon(&sdata->u.mesh);
849 	if (ret)
850 		/* just reuse old beacon */
851 		return ret;
852 
853 	if (old_bcn)
854 		kfree_rcu(old_bcn, rcu_head);
855 	return 0;
856 }
857 
858 void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
859 				       u32 changed)
860 {
861 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
862 	unsigned long bits = changed;
863 	u32 bit;
864 
865 	if (!bits)
866 		return;
867 
868 	/* if we race with running work, worst case this work becomes a noop */
869 	for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE)
870 		set_bit(bit, &ifmsh->mbss_changed);
871 	set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags);
872 	ieee80211_queue_work(&sdata->local->hw, &sdata->work);
873 }
874 
875 int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
876 {
877 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
878 	struct ieee80211_local *local = sdata->local;
879 	u32 changed = BSS_CHANGED_BEACON |
880 		      BSS_CHANGED_BEACON_ENABLED |
881 		      BSS_CHANGED_HT |
882 		      BSS_CHANGED_BASIC_RATES |
883 		      BSS_CHANGED_BEACON_INT;
884 
885 	local->fif_other_bss++;
886 	/* mesh ifaces must set allmulti to forward mcast traffic */
887 	atomic_inc(&local->iff_allmultis);
888 	ieee80211_configure_filter(local);
889 
890 	ifmsh->mesh_cc_id = 0;	/* Disabled */
891 	/* register sync ops from extensible synchronization framework */
892 	ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
893 	ifmsh->sync_offset_clockdrift_max = 0;
894 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
895 	ieee80211_mesh_root_setup(ifmsh);
896 	ieee80211_queue_work(&local->hw, &sdata->work);
897 	sdata->vif.bss_conf.ht_operation_mode =
898 				ifmsh->mshcfg.ht_opmode;
899 	sdata->vif.bss_conf.enable_beacon = true;
900 
901 	changed |= ieee80211_mps_local_status_update(sdata);
902 
903 	if (ieee80211_mesh_build_beacon(ifmsh)) {
904 		ieee80211_stop_mesh(sdata);
905 		return -ENOMEM;
906 	}
907 
908 	ieee80211_recalc_dtim(local, sdata);
909 	ieee80211_bss_info_change_notify(sdata, changed);
910 
911 	netif_carrier_on(sdata->dev);
912 	return 0;
913 }
914 
915 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
916 {
917 	struct ieee80211_local *local = sdata->local;
918 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
919 	struct beacon_data *bcn;
920 
921 	netif_carrier_off(sdata->dev);
922 
923 	/* flush STAs and mpaths on this iface */
924 	sta_info_flush(sdata);
925 	mesh_path_flush_by_iface(sdata);
926 
927 	/* stop the beacon */
928 	ifmsh->mesh_id_len = 0;
929 	sdata->vif.bss_conf.enable_beacon = false;
930 	clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
931 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
932 
933 	/* remove beacon */
934 	bcn = rcu_dereference_protected(ifmsh->beacon,
935 					lockdep_is_held(&sdata->wdev.mtx));
936 	RCU_INIT_POINTER(ifmsh->beacon, NULL);
937 	kfree_rcu(bcn, rcu_head);
938 
939 	/* free all potentially still buffered group-addressed frames */
940 	local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
941 	skb_queue_purge(&ifmsh->ps.bc_buf);
942 
943 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
944 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
945 	del_timer_sync(&sdata->u.mesh.mesh_path_timer);
946 
947 	/* clear any mesh work (for next join) we may have accrued */
948 	ifmsh->wrkq_flags = 0;
949 	ifmsh->mbss_changed = 0;
950 
951 	local->fif_other_bss--;
952 	atomic_dec(&local->iff_allmultis);
953 	ieee80211_configure_filter(local);
954 }
955 
956 static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata)
957 {
958 	int err;
959 
960 	/* if the current channel is a DFS channel, mark the channel as
961 	 * unavailable.
962 	 */
963 	err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
964 					    &sdata->vif.bss_conf.chandef,
965 					    NL80211_IFTYPE_MESH_POINT);
966 	if (err > 0)
967 		cfg80211_radar_event(sdata->local->hw.wiphy,
968 				     &sdata->vif.bss_conf.chandef, GFP_ATOMIC);
969 }
970 
971 static bool
972 ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
973 				 struct ieee802_11_elems *elems, bool beacon)
974 {
975 	struct cfg80211_csa_settings params;
976 	struct ieee80211_csa_ie csa_ie;
977 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
978 	struct ieee80211_supported_band *sband;
979 	int err;
980 	u32 sta_flags;
981 
982 	sdata_assert_lock(sdata);
983 
984 	sband = ieee80211_get_sband(sdata);
985 	if (!sband)
986 		return false;
987 
988 	sta_flags = 0;
989 	switch (sdata->vif.bss_conf.chandef.width) {
990 	case NL80211_CHAN_WIDTH_20_NOHT:
991 		sta_flags |= IEEE80211_STA_DISABLE_HT;
992 	case NL80211_CHAN_WIDTH_20:
993 		sta_flags |= IEEE80211_STA_DISABLE_40MHZ;
994 	case NL80211_CHAN_WIDTH_40:
995 		sta_flags |= IEEE80211_STA_DISABLE_VHT;
996 		break;
997 	default:
998 		break;
999 	}
1000 
1001 	memset(&params, 0, sizeof(params));
1002 	err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band,
1003 					   sta_flags, sdata->vif.addr,
1004 					   &csa_ie);
1005 	if (err < 0)
1006 		return false;
1007 	if (err)
1008 		return false;
1009 
1010 	/* Mark the channel unavailable if the reason for the switch is
1011 	 * regulatory.
1012 	 */
1013 	if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY)
1014 		ieee80211_mesh_csa_mark_radar(sdata);
1015 
1016 	params.chandef = csa_ie.chandef;
1017 	params.count = csa_ie.count;
1018 
1019 	if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, &params.chandef,
1020 				     IEEE80211_CHAN_DISABLED) ||
1021 	    !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, &params.chandef,
1022 				     NL80211_IFTYPE_MESH_POINT)) {
1023 		sdata_info(sdata,
1024 			   "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1025 			   sdata->vif.addr,
1026 			   params.chandef.chan->center_freq,
1027 			   params.chandef.width,
1028 			   params.chandef.center_freq1,
1029 			   params.chandef.center_freq2);
1030 		return false;
1031 	}
1032 
1033 	err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
1034 					    &params.chandef,
1035 					    NL80211_IFTYPE_MESH_POINT);
1036 	if (err < 0)
1037 		return false;
1038 	if (err > 0 && !ifmsh->userspace_handles_dfs) {
1039 		sdata_info(sdata,
1040 			   "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1041 			   sdata->vif.addr,
1042 			   params.chandef.chan->center_freq,
1043 			   params.chandef.width,
1044 			   params.chandef.center_freq1,
1045 			   params.chandef.center_freq2);
1046 		return false;
1047 	}
1048 
1049 	params.radar_required = err;
1050 
1051 	if (cfg80211_chandef_identical(&params.chandef,
1052 				       &sdata->vif.bss_conf.chandef)) {
1053 		mcsa_dbg(sdata,
1054 			 "received csa with an identical chandef, ignoring\n");
1055 		return true;
1056 	}
1057 
1058 	mcsa_dbg(sdata,
1059 		 "received channel switch announcement to go to channel %d MHz\n",
1060 		 params.chandef.chan->center_freq);
1061 
1062 	params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
1063 	if (beacon) {
1064 		ifmsh->chsw_ttl = csa_ie.ttl - 1;
1065 		if (ifmsh->pre_value >= csa_ie.pre_value)
1066 			return false;
1067 		ifmsh->pre_value = csa_ie.pre_value;
1068 	}
1069 
1070 	if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL)
1071 		return false;
1072 
1073 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER;
1074 
1075 	if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev,
1076 				     &params) < 0)
1077 		return false;
1078 
1079 	return true;
1080 }
1081 
1082 static void
1083 ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
1084 			    struct ieee80211_mgmt *mgmt, size_t len)
1085 {
1086 	struct ieee80211_local *local = sdata->local;
1087 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1088 	struct sk_buff *presp;
1089 	struct beacon_data *bcn;
1090 	struct ieee80211_mgmt *hdr;
1091 	struct ieee802_11_elems elems;
1092 	size_t baselen;
1093 	u8 *pos;
1094 
1095 	pos = mgmt->u.probe_req.variable;
1096 	baselen = (u8 *) pos - (u8 *) mgmt;
1097 	if (baselen > len)
1098 		return;
1099 
1100 	ieee802_11_parse_elems(pos, len - baselen, false, &elems);
1101 
1102 	if (!elems.mesh_id)
1103 		return;
1104 
1105 	/* 802.11-2012 10.1.4.3.2 */
1106 	if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
1107 	     !is_broadcast_ether_addr(mgmt->da)) ||
1108 	    elems.ssid_len != 0)
1109 		return;
1110 
1111 	if (elems.mesh_id_len != 0 &&
1112 	    (elems.mesh_id_len != ifmsh->mesh_id_len ||
1113 	     memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len)))
1114 		return;
1115 
1116 	rcu_read_lock();
1117 	bcn = rcu_dereference(ifmsh->beacon);
1118 
1119 	if (!bcn)
1120 		goto out;
1121 
1122 	presp = dev_alloc_skb(local->tx_headroom +
1123 			      bcn->head_len + bcn->tail_len);
1124 	if (!presp)
1125 		goto out;
1126 
1127 	skb_reserve(presp, local->tx_headroom);
1128 	skb_put_data(presp, bcn->head, bcn->head_len);
1129 	skb_put_data(presp, bcn->tail, bcn->tail_len);
1130 	hdr = (struct ieee80211_mgmt *) presp->data;
1131 	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1132 					 IEEE80211_STYPE_PROBE_RESP);
1133 	memcpy(hdr->da, mgmt->sa, ETH_ALEN);
1134 	IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1135 	ieee80211_tx_skb(sdata, presp);
1136 out:
1137 	rcu_read_unlock();
1138 }
1139 
1140 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
1141 					u16 stype,
1142 					struct ieee80211_mgmt *mgmt,
1143 					size_t len,
1144 					struct ieee80211_rx_status *rx_status)
1145 {
1146 	struct ieee80211_local *local = sdata->local;
1147 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1148 	struct ieee802_11_elems elems;
1149 	struct ieee80211_channel *channel;
1150 	size_t baselen;
1151 	int freq;
1152 	enum nl80211_band band = rx_status->band;
1153 
1154 	/* ignore ProbeResp to foreign address */
1155 	if (stype == IEEE80211_STYPE_PROBE_RESP &&
1156 	    !ether_addr_equal(mgmt->da, sdata->vif.addr))
1157 		return;
1158 
1159 	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
1160 	if (baselen > len)
1161 		return;
1162 
1163 	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
1164 			       false, &elems);
1165 
1166 	/* ignore non-mesh or secure / unsecure mismatch */
1167 	if ((!elems.mesh_id || !elems.mesh_config) ||
1168 	    (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) ||
1169 	    (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE))
1170 		return;
1171 
1172 	if (elems.ds_params)
1173 		freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
1174 	else
1175 		freq = rx_status->freq;
1176 
1177 	channel = ieee80211_get_channel(local->hw.wiphy, freq);
1178 
1179 	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
1180 		return;
1181 
1182 	if (mesh_matches_local(sdata, &elems)) {
1183 		mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n",
1184 			sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal);
1185 		if (!sdata->u.mesh.user_mpm ||
1186 		    sdata->u.mesh.mshcfg.rssi_threshold == 0 ||
1187 		    sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
1188 			mesh_neighbour_update(sdata, mgmt->sa, &elems);
1189 	}
1190 
1191 	if (ifmsh->sync_ops)
1192 		ifmsh->sync_ops->rx_bcn_presp(sdata,
1193 			stype, mgmt, &elems, rx_status);
1194 
1195 	if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
1196 	    !sdata->vif.csa_active)
1197 		ieee80211_mesh_process_chnswitch(sdata, &elems, true);
1198 }
1199 
1200 int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
1201 {
1202 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1203 	struct mesh_csa_settings *tmp_csa_settings;
1204 	int ret = 0;
1205 	int changed = 0;
1206 
1207 	/* Reset the TTL value and Initiator flag */
1208 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1209 	ifmsh->chsw_ttl = 0;
1210 
1211 	/* Remove the CSA and MCSP elements from the beacon */
1212 	tmp_csa_settings = rcu_dereference(ifmsh->csa);
1213 	RCU_INIT_POINTER(ifmsh->csa, NULL);
1214 	if (tmp_csa_settings)
1215 		kfree_rcu(tmp_csa_settings, rcu_head);
1216 	ret = ieee80211_mesh_rebuild_beacon(sdata);
1217 	if (ret)
1218 		return -EINVAL;
1219 
1220 	changed |= BSS_CHANGED_BEACON;
1221 
1222 	mcsa_dbg(sdata, "complete switching to center freq %d MHz",
1223 		 sdata->vif.bss_conf.chandef.chan->center_freq);
1224 	return changed;
1225 }
1226 
1227 int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
1228 			      struct cfg80211_csa_settings *csa_settings)
1229 {
1230 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1231 	struct mesh_csa_settings *tmp_csa_settings;
1232 	int ret = 0;
1233 
1234 	tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
1235 				   GFP_ATOMIC);
1236 	if (!tmp_csa_settings)
1237 		return -ENOMEM;
1238 
1239 	memcpy(&tmp_csa_settings->settings, csa_settings,
1240 	       sizeof(struct cfg80211_csa_settings));
1241 
1242 	rcu_assign_pointer(ifmsh->csa, tmp_csa_settings);
1243 
1244 	ret = ieee80211_mesh_rebuild_beacon(sdata);
1245 	if (ret) {
1246 		tmp_csa_settings = rcu_dereference(ifmsh->csa);
1247 		RCU_INIT_POINTER(ifmsh->csa, NULL);
1248 		kfree_rcu(tmp_csa_settings, rcu_head);
1249 		return ret;
1250 	}
1251 
1252 	return BSS_CHANGED_BEACON;
1253 }
1254 
1255 static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
1256 			       struct ieee80211_mgmt *mgmt, size_t len)
1257 {
1258 	struct ieee80211_mgmt *mgmt_fwd;
1259 	struct sk_buff *skb;
1260 	struct ieee80211_local *local = sdata->local;
1261 	u8 *pos = mgmt->u.action.u.chan_switch.variable;
1262 	size_t offset_ttl;
1263 
1264 	skb = dev_alloc_skb(local->tx_headroom + len);
1265 	if (!skb)
1266 		return -ENOMEM;
1267 	skb_reserve(skb, local->tx_headroom);
1268 	mgmt_fwd = skb_put(skb, len);
1269 
1270 	/* offset_ttl is based on whether the secondary channel
1271 	 * offset is available or not. Subtract 1 from the mesh TTL
1272 	 * and disable the initiator flag before forwarding.
1273 	 */
1274 	offset_ttl = (len < 42) ? 7 : 10;
1275 	*(pos + offset_ttl) -= 1;
1276 	*(pos + offset_ttl + 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
1277 
1278 	memcpy(mgmt_fwd, mgmt, len);
1279 	eth_broadcast_addr(mgmt_fwd->da);
1280 	memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN);
1281 	memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN);
1282 
1283 	ieee80211_tx_skb(sdata, skb);
1284 	return 0;
1285 }
1286 
1287 static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
1288 			      struct ieee80211_mgmt *mgmt, size_t len)
1289 {
1290 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1291 	struct ieee802_11_elems elems;
1292 	u16 pre_value;
1293 	bool fwd_csa = true;
1294 	size_t baselen;
1295 	u8 *pos;
1296 
1297 	if (mgmt->u.action.u.measurement.action_code !=
1298 	    WLAN_ACTION_SPCT_CHL_SWITCH)
1299 		return;
1300 
1301 	pos = mgmt->u.action.u.chan_switch.variable;
1302 	baselen = offsetof(struct ieee80211_mgmt,
1303 			   u.action.u.chan_switch.variable);
1304 	ieee802_11_parse_elems(pos, len - baselen, true, &elems);
1305 
1306 	ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
1307 	if (!--ifmsh->chsw_ttl)
1308 		fwd_csa = false;
1309 
1310 	pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value);
1311 	if (ifmsh->pre_value >= pre_value)
1312 		return;
1313 
1314 	ifmsh->pre_value = pre_value;
1315 
1316 	if (!sdata->vif.csa_active &&
1317 	    !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
1318 		mcsa_dbg(sdata, "Failed to process CSA action frame");
1319 		return;
1320 	}
1321 
1322 	/* forward or re-broadcast the CSA frame */
1323 	if (fwd_csa) {
1324 		if (mesh_fwd_csa_frame(sdata, mgmt, len) < 0)
1325 			mcsa_dbg(sdata, "Failed to forward the CSA frame");
1326 	}
1327 }
1328 
1329 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
1330 					  struct ieee80211_mgmt *mgmt,
1331 					  size_t len,
1332 					  struct ieee80211_rx_status *rx_status)
1333 {
1334 	switch (mgmt->u.action.category) {
1335 	case WLAN_CATEGORY_SELF_PROTECTED:
1336 		switch (mgmt->u.action.u.self_prot.action_code) {
1337 		case WLAN_SP_MESH_PEERING_OPEN:
1338 		case WLAN_SP_MESH_PEERING_CLOSE:
1339 		case WLAN_SP_MESH_PEERING_CONFIRM:
1340 			mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
1341 			break;
1342 		}
1343 		break;
1344 	case WLAN_CATEGORY_MESH_ACTION:
1345 		if (mesh_action_is_path_sel(mgmt))
1346 			mesh_rx_path_sel_frame(sdata, mgmt, len);
1347 		break;
1348 	case WLAN_CATEGORY_SPECTRUM_MGMT:
1349 		mesh_rx_csa_frame(sdata, mgmt, len);
1350 		break;
1351 	}
1352 }
1353 
1354 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
1355 				   struct sk_buff *skb)
1356 {
1357 	struct ieee80211_rx_status *rx_status;
1358 	struct ieee80211_mgmt *mgmt;
1359 	u16 stype;
1360 
1361 	sdata_lock(sdata);
1362 
1363 	/* mesh already went down */
1364 	if (!sdata->u.mesh.mesh_id_len)
1365 		goto out;
1366 
1367 	rx_status = IEEE80211_SKB_RXCB(skb);
1368 	mgmt = (struct ieee80211_mgmt *) skb->data;
1369 	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
1370 
1371 	switch (stype) {
1372 	case IEEE80211_STYPE_PROBE_RESP:
1373 	case IEEE80211_STYPE_BEACON:
1374 		ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
1375 					    rx_status);
1376 		break;
1377 	case IEEE80211_STYPE_PROBE_REQ:
1378 		ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len);
1379 		break;
1380 	case IEEE80211_STYPE_ACTION:
1381 		ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
1382 		break;
1383 	}
1384 out:
1385 	sdata_unlock(sdata);
1386 }
1387 
1388 static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata)
1389 {
1390 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1391 	u32 bit, changed = 0;
1392 
1393 	for_each_set_bit(bit, &ifmsh->mbss_changed,
1394 			 sizeof(changed) * BITS_PER_BYTE) {
1395 		clear_bit(bit, &ifmsh->mbss_changed);
1396 		changed |= BIT(bit);
1397 	}
1398 
1399 	if (sdata->vif.bss_conf.enable_beacon &&
1400 	    (changed & (BSS_CHANGED_BEACON |
1401 			BSS_CHANGED_HT |
1402 			BSS_CHANGED_BASIC_RATES |
1403 			BSS_CHANGED_BEACON_INT)))
1404 		if (ieee80211_mesh_rebuild_beacon(sdata))
1405 			return;
1406 
1407 	ieee80211_bss_info_change_notify(sdata, changed);
1408 }
1409 
1410 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
1411 {
1412 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1413 
1414 	sdata_lock(sdata);
1415 
1416 	/* mesh already went down */
1417 	if (!sdata->u.mesh.mesh_id_len)
1418 		goto out;
1419 
1420 	if (ifmsh->preq_queue_len &&
1421 	    time_after(jiffies,
1422 		       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
1423 		mesh_path_start_discovery(sdata);
1424 
1425 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
1426 		ieee80211_mesh_housekeeping(sdata);
1427 
1428 	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
1429 		ieee80211_mesh_rootpath(sdata);
1430 
1431 	if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
1432 		mesh_sync_adjust_tsf(sdata);
1433 
1434 	if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags))
1435 		mesh_bss_info_changed(sdata);
1436 out:
1437 	sdata_unlock(sdata);
1438 }
1439 
1440 
1441 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
1442 {
1443 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1444 	static u8 zero_addr[ETH_ALEN] = {};
1445 
1446 	setup_timer(&ifmsh->housekeeping_timer,
1447 		    ieee80211_mesh_housekeeping_timer,
1448 		    (unsigned long) sdata);
1449 
1450 	ifmsh->accepting_plinks = true;
1451 	atomic_set(&ifmsh->mpaths, 0);
1452 	mesh_rmc_init(sdata);
1453 	ifmsh->last_preq = jiffies;
1454 	ifmsh->next_perr = jiffies;
1455 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1456 	/* Allocate all mesh structures when creating the first mesh interface. */
1457 	if (!mesh_allocated)
1458 		ieee80211s_init();
1459 
1460 	mesh_pathtbl_init(sdata);
1461 
1462 	setup_timer(&ifmsh->mesh_path_timer,
1463 		    ieee80211_mesh_path_timer,
1464 		    (unsigned long) sdata);
1465 	setup_timer(&ifmsh->mesh_path_root_timer,
1466 		    ieee80211_mesh_path_root_timer,
1467 		    (unsigned long) sdata);
1468 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
1469 	skb_queue_head_init(&ifmsh->ps.bc_buf);
1470 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
1471 	spin_lock_init(&ifmsh->sync_offset_lock);
1472 	RCU_INIT_POINTER(ifmsh->beacon, NULL);
1473 
1474 	sdata->vif.bss_conf.bssid = zero_addr;
1475 }
1476 
1477 void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata)
1478 {
1479 	mesh_rmc_free(sdata);
1480 	mesh_pathtbl_unregister(sdata);
1481 }
1482