xref: /openbmc/linux/net/mac80211/main.c (revision 93df8a1e)
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
5  * Copyright 2013-2014  Intel Mobile Communications GmbH
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11 
12 #include <net/mac80211.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/types.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/if_arp.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/bitmap.h>
23 #include <linux/pm_qos.h>
24 #include <linux/inetdevice.h>
25 #include <net/net_namespace.h>
26 #include <net/cfg80211.h>
27 #include <net/addrconf.h>
28 
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
31 #include "rate.h"
32 #include "mesh.h"
33 #include "wep.h"
34 #include "led.h"
35 #include "cfg.h"
36 #include "debugfs.h"
37 
38 void ieee80211_configure_filter(struct ieee80211_local *local)
39 {
40 	u64 mc;
41 	unsigned int changed_flags;
42 	unsigned int new_flags = 0;
43 
44 	if (atomic_read(&local->iff_allmultis))
45 		new_flags |= FIF_ALLMULTI;
46 
47 	if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
48 	    test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
49 		new_flags |= FIF_BCN_PRBRESP_PROMISC;
50 
51 	if (local->fif_probe_req || local->probe_req_reg)
52 		new_flags |= FIF_PROBE_REQ;
53 
54 	if (local->fif_fcsfail)
55 		new_flags |= FIF_FCSFAIL;
56 
57 	if (local->fif_plcpfail)
58 		new_flags |= FIF_PLCPFAIL;
59 
60 	if (local->fif_control)
61 		new_flags |= FIF_CONTROL;
62 
63 	if (local->fif_other_bss)
64 		new_flags |= FIF_OTHER_BSS;
65 
66 	if (local->fif_pspoll)
67 		new_flags |= FIF_PSPOLL;
68 
69 	spin_lock_bh(&local->filter_lock);
70 	changed_flags = local->filter_flags ^ new_flags;
71 
72 	mc = drv_prepare_multicast(local, &local->mc_list);
73 	spin_unlock_bh(&local->filter_lock);
74 
75 	/* be a bit nasty */
76 	new_flags |= (1<<31);
77 
78 	drv_configure_filter(local, changed_flags, &new_flags, mc);
79 
80 	WARN_ON(new_flags & (1<<31));
81 
82 	local->filter_flags = new_flags & ~(1<<31);
83 }
84 
85 static void ieee80211_reconfig_filter(struct work_struct *work)
86 {
87 	struct ieee80211_local *local =
88 		container_of(work, struct ieee80211_local, reconfig_filter);
89 
90 	ieee80211_configure_filter(local);
91 }
92 
93 static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
94 {
95 	struct ieee80211_sub_if_data *sdata;
96 	struct cfg80211_chan_def chandef = {};
97 	u32 changed = 0;
98 	int power;
99 	u32 offchannel_flag;
100 
101 	offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
102 
103 	if (local->scan_chandef.chan) {
104 		chandef = local->scan_chandef;
105 	} else if (local->tmp_channel) {
106 		chandef.chan = local->tmp_channel;
107 		chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
108 		chandef.center_freq1 = chandef.chan->center_freq;
109 	} else
110 		chandef = local->_oper_chandef;
111 
112 	WARN(!cfg80211_chandef_valid(&chandef),
113 	     "control:%d MHz width:%d center: %d/%d MHz",
114 	     chandef.chan->center_freq, chandef.width,
115 	     chandef.center_freq1, chandef.center_freq2);
116 
117 	if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
118 		local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
119 	else
120 		local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
121 
122 	offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
123 
124 	if (offchannel_flag ||
125 	    !cfg80211_chandef_identical(&local->hw.conf.chandef,
126 					&local->_oper_chandef)) {
127 		local->hw.conf.chandef = chandef;
128 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
129 	}
130 
131 	if (!conf_is_ht(&local->hw.conf)) {
132 		/*
133 		 * mac80211.h documents that this is only valid
134 		 * when the channel is set to an HT type, and
135 		 * that otherwise STATIC is used.
136 		 */
137 		local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
138 	} else if (local->hw.conf.smps_mode != local->smps_mode) {
139 		local->hw.conf.smps_mode = local->smps_mode;
140 		changed |= IEEE80211_CONF_CHANGE_SMPS;
141 	}
142 
143 	power = ieee80211_chandef_max_power(&chandef);
144 
145 	rcu_read_lock();
146 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
147 		if (!rcu_access_pointer(sdata->vif.chanctx_conf))
148 			continue;
149 		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
150 			continue;
151 		power = min(power, sdata->vif.bss_conf.txpower);
152 	}
153 	rcu_read_unlock();
154 
155 	if (local->hw.conf.power_level != power) {
156 		changed |= IEEE80211_CONF_CHANGE_POWER;
157 		local->hw.conf.power_level = power;
158 	}
159 
160 	return changed;
161 }
162 
163 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
164 {
165 	int ret = 0;
166 
167 	might_sleep();
168 
169 	if (!local->use_chanctx)
170 		changed |= ieee80211_hw_conf_chan(local);
171 	else
172 		changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
173 			     IEEE80211_CONF_CHANGE_POWER);
174 
175 	if (changed && local->open_count) {
176 		ret = drv_config(local, changed);
177 		/*
178 		 * Goal:
179 		 * HW reconfiguration should never fail, the driver has told
180 		 * us what it can support so it should live up to that promise.
181 		 *
182 		 * Current status:
183 		 * rfkill is not integrated with mac80211 and a
184 		 * configuration command can thus fail if hardware rfkill
185 		 * is enabled
186 		 *
187 		 * FIXME: integrate rfkill with mac80211 and then add this
188 		 * WARN_ON() back
189 		 *
190 		 */
191 		/* WARN_ON(ret); */
192 	}
193 
194 	return ret;
195 }
196 
197 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
198 				      u32 changed)
199 {
200 	struct ieee80211_local *local = sdata->local;
201 
202 	if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
203 		return;
204 
205 	drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
206 }
207 
208 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
209 {
210 	sdata->vif.bss_conf.use_cts_prot = false;
211 	sdata->vif.bss_conf.use_short_preamble = false;
212 	sdata->vif.bss_conf.use_short_slot = false;
213 	return BSS_CHANGED_ERP_CTS_PROT |
214 	       BSS_CHANGED_ERP_PREAMBLE |
215 	       BSS_CHANGED_ERP_SLOT;
216 }
217 
218 static void ieee80211_tasklet_handler(unsigned long data)
219 {
220 	struct ieee80211_local *local = (struct ieee80211_local *) data;
221 	struct sk_buff *skb;
222 
223 	while ((skb = skb_dequeue(&local->skb_queue)) ||
224 	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
225 		switch (skb->pkt_type) {
226 		case IEEE80211_RX_MSG:
227 			/* Clear skb->pkt_type in order to not confuse kernel
228 			 * netstack. */
229 			skb->pkt_type = 0;
230 			ieee80211_rx(&local->hw, skb);
231 			break;
232 		case IEEE80211_TX_STATUS_MSG:
233 			skb->pkt_type = 0;
234 			ieee80211_tx_status(&local->hw, skb);
235 			break;
236 		default:
237 			WARN(1, "mac80211: Packet is of unknown type %d\n",
238 			     skb->pkt_type);
239 			dev_kfree_skb(skb);
240 			break;
241 		}
242 	}
243 }
244 
245 static void ieee80211_restart_work(struct work_struct *work)
246 {
247 	struct ieee80211_local *local =
248 		container_of(work, struct ieee80211_local, restart_work);
249 	struct ieee80211_sub_if_data *sdata;
250 
251 	/* wait for scan work complete */
252 	flush_workqueue(local->workqueue);
253 
254 	WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
255 	     "%s called with hardware scan in progress\n", __func__);
256 
257 	rtnl_lock();
258 	list_for_each_entry(sdata, &local->interfaces, list)
259 		flush_delayed_work(&sdata->dec_tailroom_needed_wk);
260 	ieee80211_scan_cancel(local);
261 	ieee80211_reconfig(local);
262 	rtnl_unlock();
263 }
264 
265 void ieee80211_restart_hw(struct ieee80211_hw *hw)
266 {
267 	struct ieee80211_local *local = hw_to_local(hw);
268 
269 	trace_api_restart_hw(local);
270 
271 	wiphy_info(hw->wiphy,
272 		   "Hardware restart was requested\n");
273 
274 	/* use this reason, ieee80211_reconfig will unblock it */
275 	ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
276 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
277 					false);
278 
279 	/*
280 	 * Stop all Rx during the reconfig. We don't want state changes
281 	 * or driver callbacks while this is in progress.
282 	 */
283 	local->in_reconfig = true;
284 	barrier();
285 
286 	schedule_work(&local->restart_work);
287 }
288 EXPORT_SYMBOL(ieee80211_restart_hw);
289 
290 #ifdef CONFIG_INET
291 static int ieee80211_ifa_changed(struct notifier_block *nb,
292 				 unsigned long data, void *arg)
293 {
294 	struct in_ifaddr *ifa = arg;
295 	struct ieee80211_local *local =
296 		container_of(nb, struct ieee80211_local,
297 			     ifa_notifier);
298 	struct net_device *ndev = ifa->ifa_dev->dev;
299 	struct wireless_dev *wdev = ndev->ieee80211_ptr;
300 	struct in_device *idev;
301 	struct ieee80211_sub_if_data *sdata;
302 	struct ieee80211_bss_conf *bss_conf;
303 	struct ieee80211_if_managed *ifmgd;
304 	int c = 0;
305 
306 	/* Make sure it's our interface that got changed */
307 	if (!wdev)
308 		return NOTIFY_DONE;
309 
310 	if (wdev->wiphy != local->hw.wiphy)
311 		return NOTIFY_DONE;
312 
313 	sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
314 	bss_conf = &sdata->vif.bss_conf;
315 
316 	/* ARP filtering is only supported in managed mode */
317 	if (sdata->vif.type != NL80211_IFTYPE_STATION)
318 		return NOTIFY_DONE;
319 
320 	idev = __in_dev_get_rtnl(sdata->dev);
321 	if (!idev)
322 		return NOTIFY_DONE;
323 
324 	ifmgd = &sdata->u.mgd;
325 	sdata_lock(sdata);
326 
327 	/* Copy the addresses to the bss_conf list */
328 	ifa = idev->ifa_list;
329 	while (ifa) {
330 		if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
331 			bss_conf->arp_addr_list[c] = ifa->ifa_address;
332 		ifa = ifa->ifa_next;
333 		c++;
334 	}
335 
336 	bss_conf->arp_addr_cnt = c;
337 
338 	/* Configure driver only if associated (which also implies it is up) */
339 	if (ifmgd->associated)
340 		ieee80211_bss_info_change_notify(sdata,
341 						 BSS_CHANGED_ARP_FILTER);
342 
343 	sdata_unlock(sdata);
344 
345 	return NOTIFY_OK;
346 }
347 #endif
348 
349 #if IS_ENABLED(CONFIG_IPV6)
350 static int ieee80211_ifa6_changed(struct notifier_block *nb,
351 				  unsigned long data, void *arg)
352 {
353 	struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
354 	struct inet6_dev *idev = ifa->idev;
355 	struct net_device *ndev = ifa->idev->dev;
356 	struct ieee80211_local *local =
357 		container_of(nb, struct ieee80211_local, ifa6_notifier);
358 	struct wireless_dev *wdev = ndev->ieee80211_ptr;
359 	struct ieee80211_sub_if_data *sdata;
360 
361 	/* Make sure it's our interface that got changed */
362 	if (!wdev || wdev->wiphy != local->hw.wiphy)
363 		return NOTIFY_DONE;
364 
365 	sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
366 
367 	/*
368 	 * For now only support station mode. This is mostly because
369 	 * doing AP would have to handle AP_VLAN in some way ...
370 	 */
371 	if (sdata->vif.type != NL80211_IFTYPE_STATION)
372 		return NOTIFY_DONE;
373 
374 	drv_ipv6_addr_change(local, sdata, idev);
375 
376 	return NOTIFY_OK;
377 }
378 #endif
379 
380 /* There isn't a lot of sense in it, but you can transmit anything you like */
381 static const struct ieee80211_txrx_stypes
382 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
383 	[NL80211_IFTYPE_ADHOC] = {
384 		.tx = 0xffff,
385 		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
386 			BIT(IEEE80211_STYPE_AUTH >> 4) |
387 			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
388 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
389 	},
390 	[NL80211_IFTYPE_STATION] = {
391 		.tx = 0xffff,
392 		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
393 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
394 	},
395 	[NL80211_IFTYPE_AP] = {
396 		.tx = 0xffff,
397 		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
398 			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
399 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
400 			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
401 			BIT(IEEE80211_STYPE_AUTH >> 4) |
402 			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
403 			BIT(IEEE80211_STYPE_ACTION >> 4),
404 	},
405 	[NL80211_IFTYPE_AP_VLAN] = {
406 		/* copy AP */
407 		.tx = 0xffff,
408 		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
409 			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
410 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
411 			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
412 			BIT(IEEE80211_STYPE_AUTH >> 4) |
413 			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
414 			BIT(IEEE80211_STYPE_ACTION >> 4),
415 	},
416 	[NL80211_IFTYPE_P2P_CLIENT] = {
417 		.tx = 0xffff,
418 		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
419 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
420 	},
421 	[NL80211_IFTYPE_P2P_GO] = {
422 		.tx = 0xffff,
423 		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
424 			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
425 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
426 			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
427 			BIT(IEEE80211_STYPE_AUTH >> 4) |
428 			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
429 			BIT(IEEE80211_STYPE_ACTION >> 4),
430 	},
431 	[NL80211_IFTYPE_MESH_POINT] = {
432 		.tx = 0xffff,
433 		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
434 			BIT(IEEE80211_STYPE_AUTH >> 4) |
435 			BIT(IEEE80211_STYPE_DEAUTH >> 4),
436 	},
437 	[NL80211_IFTYPE_P2P_DEVICE] = {
438 		.tx = 0xffff,
439 		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
440 			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
441 	},
442 };
443 
444 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
445 	.ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
446 			     IEEE80211_HT_AMPDU_PARM_DENSITY,
447 
448 	.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
449 				IEEE80211_HT_CAP_MAX_AMSDU |
450 				IEEE80211_HT_CAP_SGI_20 |
451 				IEEE80211_HT_CAP_SGI_40 |
452 				IEEE80211_HT_CAP_LDPC_CODING |
453 				IEEE80211_HT_CAP_40MHZ_INTOLERANT),
454 	.mcs = {
455 		.rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
456 			     0xff, 0xff, 0xff, 0xff, 0xff, },
457 	},
458 };
459 
460 static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
461 	.vht_cap_info =
462 		cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
463 			    IEEE80211_VHT_CAP_SHORT_GI_80 |
464 			    IEEE80211_VHT_CAP_SHORT_GI_160 |
465 			    IEEE80211_VHT_CAP_RXSTBC_1 |
466 			    IEEE80211_VHT_CAP_RXSTBC_2 |
467 			    IEEE80211_VHT_CAP_RXSTBC_3 |
468 			    IEEE80211_VHT_CAP_RXSTBC_4 |
469 			    IEEE80211_VHT_CAP_TXSTBC |
470 			    IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
471 			    IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
472 			    IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
473 			    IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
474 			    IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
475 	.supp_mcs = {
476 		.rx_mcs_map = cpu_to_le16(~0),
477 		.tx_mcs_map = cpu_to_le16(~0),
478 	},
479 };
480 
481 struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
482 					   const struct ieee80211_ops *ops,
483 					   const char *requested_name)
484 {
485 	struct ieee80211_local *local;
486 	int priv_size, i;
487 	struct wiphy *wiphy;
488 	bool use_chanctx;
489 
490 	if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
491 		    !ops->add_interface || !ops->remove_interface ||
492 		    !ops->configure_filter))
493 		return NULL;
494 
495 	if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
496 		return NULL;
497 
498 	/* check all or no channel context operations exist */
499 	i = !!ops->add_chanctx + !!ops->remove_chanctx +
500 	    !!ops->change_chanctx + !!ops->assign_vif_chanctx +
501 	    !!ops->unassign_vif_chanctx;
502 	if (WARN_ON(i != 0 && i != 5))
503 		return NULL;
504 	use_chanctx = i == 5;
505 
506 	/* Ensure 32-byte alignment of our private data and hw private data.
507 	 * We use the wiphy priv data for both our ieee80211_local and for
508 	 * the driver's private data
509 	 *
510 	 * In memory it'll be like this:
511 	 *
512 	 * +-------------------------+
513 	 * | struct wiphy	    |
514 	 * +-------------------------+
515 	 * | struct ieee80211_local  |
516 	 * +-------------------------+
517 	 * | driver's private data   |
518 	 * +-------------------------+
519 	 *
520 	 */
521 	priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
522 
523 	wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name);
524 
525 	if (!wiphy)
526 		return NULL;
527 
528 	wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
529 
530 	wiphy->privid = mac80211_wiphy_privid;
531 
532 	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
533 			WIPHY_FLAG_4ADDR_AP |
534 			WIPHY_FLAG_4ADDR_STATION |
535 			WIPHY_FLAG_REPORTS_OBSS |
536 			WIPHY_FLAG_OFFCHAN_TX;
537 
538 	if (ops->remain_on_channel)
539 		wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
540 
541 	wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
542 			   NL80211_FEATURE_SAE |
543 			   NL80211_FEATURE_HT_IBSS |
544 			   NL80211_FEATURE_VIF_TXPOWER |
545 			   NL80211_FEATURE_MAC_ON_CREATE |
546 			   NL80211_FEATURE_USERSPACE_MPM;
547 
548 	if (!ops->hw_scan)
549 		wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
550 				   NL80211_FEATURE_AP_SCAN;
551 
552 
553 	if (!ops->set_key)
554 		wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
555 
556 	wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
557 
558 	local = wiphy_priv(wiphy);
559 
560 	if (sta_info_init(local))
561 		goto err_free;
562 
563 	local->hw.wiphy = wiphy;
564 
565 	local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
566 
567 	local->ops = ops;
568 	local->use_chanctx = use_chanctx;
569 
570 	/* set up some defaults */
571 	local->hw.queues = 1;
572 	local->hw.max_rates = 1;
573 	local->hw.max_report_rates = 0;
574 	local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
575 	local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
576 	local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
577 	local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
578 	local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
579 	local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
580 					 IEEE80211_RADIOTAP_MCS_HAVE_GI |
581 					 IEEE80211_RADIOTAP_MCS_HAVE_BW;
582 	local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
583 					 IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
584 	local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
585 	local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
586 	local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
587 	wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
588 	wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
589 
590 	local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF;
591 
592 	wiphy->extended_capabilities = local->ext_capa;
593 	wiphy->extended_capabilities_mask = local->ext_capa;
594 	wiphy->extended_capabilities_len =
595 		ARRAY_SIZE(local->ext_capa);
596 
597 	INIT_LIST_HEAD(&local->interfaces);
598 
599 	__hw_addr_init(&local->mc_list);
600 
601 	mutex_init(&local->iflist_mtx);
602 	mutex_init(&local->mtx);
603 
604 	mutex_init(&local->key_mtx);
605 	spin_lock_init(&local->filter_lock);
606 	spin_lock_init(&local->rx_path_lock);
607 	spin_lock_init(&local->queue_stop_reason_lock);
608 
609 	INIT_LIST_HEAD(&local->chanctx_list);
610 	mutex_init(&local->chanctx_mtx);
611 
612 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
613 
614 	INIT_WORK(&local->restart_work, ieee80211_restart_work);
615 
616 	INIT_WORK(&local->radar_detected_work,
617 		  ieee80211_dfs_radar_detected_work);
618 
619 	INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
620 	local->smps_mode = IEEE80211_SMPS_OFF;
621 
622 	INIT_WORK(&local->dynamic_ps_enable_work,
623 		  ieee80211_dynamic_ps_enable_work);
624 	INIT_WORK(&local->dynamic_ps_disable_work,
625 		  ieee80211_dynamic_ps_disable_work);
626 	setup_timer(&local->dynamic_ps_timer,
627 		    ieee80211_dynamic_ps_timer, (unsigned long) local);
628 
629 	INIT_WORK(&local->sched_scan_stopped_work,
630 		  ieee80211_sched_scan_stopped_work);
631 
632 	spin_lock_init(&local->ack_status_lock);
633 	idr_init(&local->ack_status_frames);
634 
635 	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
636 		skb_queue_head_init(&local->pending[i]);
637 		atomic_set(&local->agg_queue_stop[i], 0);
638 	}
639 	tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
640 		     (unsigned long)local);
641 
642 	tasklet_init(&local->tasklet,
643 		     ieee80211_tasklet_handler,
644 		     (unsigned long) local);
645 
646 	skb_queue_head_init(&local->skb_queue);
647 	skb_queue_head_init(&local->skb_queue_unreliable);
648 
649 	ieee80211_alloc_led_names(local);
650 
651 	ieee80211_roc_setup(local);
652 
653 	return &local->hw;
654  err_free:
655 	wiphy_free(wiphy);
656 	return NULL;
657 }
658 EXPORT_SYMBOL(ieee80211_alloc_hw_nm);
659 
660 static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
661 {
662 	bool have_wep = !(IS_ERR(local->wep_tx_tfm) ||
663 			  IS_ERR(local->wep_rx_tfm));
664 	bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE);
665 	int n_suites = 0, r = 0, w = 0;
666 	u32 *suites;
667 	static const u32 cipher_suites[] = {
668 		/* keep WEP first, it may be removed below */
669 		WLAN_CIPHER_SUITE_WEP40,
670 		WLAN_CIPHER_SUITE_WEP104,
671 		WLAN_CIPHER_SUITE_TKIP,
672 		WLAN_CIPHER_SUITE_CCMP,
673 		WLAN_CIPHER_SUITE_CCMP_256,
674 		WLAN_CIPHER_SUITE_GCMP,
675 		WLAN_CIPHER_SUITE_GCMP_256,
676 
677 		/* keep last -- depends on hw flags! */
678 		WLAN_CIPHER_SUITE_AES_CMAC,
679 		WLAN_CIPHER_SUITE_BIP_CMAC_256,
680 		WLAN_CIPHER_SUITE_BIP_GMAC_128,
681 		WLAN_CIPHER_SUITE_BIP_GMAC_256,
682 	};
683 
684 	if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) ||
685 	    local->hw.wiphy->cipher_suites) {
686 		/* If the driver advertises, or doesn't support SW crypto,
687 		 * we only need to remove WEP if necessary.
688 		 */
689 		if (have_wep)
690 			return 0;
691 
692 		/* well if it has _no_ ciphers ... fine */
693 		if (!local->hw.wiphy->n_cipher_suites)
694 			return 0;
695 
696 		/* Driver provides cipher suites, but we need to exclude WEP */
697 		suites = kmemdup(local->hw.wiphy->cipher_suites,
698 				 sizeof(u32) * local->hw.wiphy->n_cipher_suites,
699 				 GFP_KERNEL);
700 		if (!suites)
701 			return -ENOMEM;
702 
703 		for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
704 			u32 suite = local->hw.wiphy->cipher_suites[r];
705 
706 			if (suite == WLAN_CIPHER_SUITE_WEP40 ||
707 			    suite == WLAN_CIPHER_SUITE_WEP104)
708 				continue;
709 			suites[w++] = suite;
710 		}
711 	} else if (!local->hw.cipher_schemes) {
712 		/* If the driver doesn't have cipher schemes, there's nothing
713 		 * else to do other than assign the (software supported and
714 		 * perhaps offloaded) cipher suites.
715 		 */
716 		local->hw.wiphy->cipher_suites = cipher_suites;
717 		local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
718 
719 		if (!have_mfp)
720 			local->hw.wiphy->n_cipher_suites -= 4;
721 
722 		if (!have_wep) {
723 			local->hw.wiphy->cipher_suites += 2;
724 			local->hw.wiphy->n_cipher_suites -= 2;
725 		}
726 
727 		/* not dynamically allocated, so just return */
728 		return 0;
729 	} else {
730 		const struct ieee80211_cipher_scheme *cs;
731 
732 		cs = local->hw.cipher_schemes;
733 
734 		/* Driver specifies cipher schemes only (but not cipher suites
735 		 * including the schemes)
736 		 *
737 		 * We start counting ciphers defined by schemes, TKIP, CCMP,
738 		 * CCMP-256, GCMP, and GCMP-256
739 		 */
740 		n_suites = local->hw.n_cipher_schemes + 5;
741 
742 		/* check if we have WEP40 and WEP104 */
743 		if (have_wep)
744 			n_suites += 2;
745 
746 		/* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
747 		 * BIP-GMAC-256
748 		 */
749 		if (have_mfp)
750 			n_suites += 4;
751 
752 		suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
753 		if (!suites)
754 			return -ENOMEM;
755 
756 		suites[w++] = WLAN_CIPHER_SUITE_CCMP;
757 		suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
758 		suites[w++] = WLAN_CIPHER_SUITE_TKIP;
759 		suites[w++] = WLAN_CIPHER_SUITE_GCMP;
760 		suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
761 
762 		if (have_wep) {
763 			suites[w++] = WLAN_CIPHER_SUITE_WEP40;
764 			suites[w++] = WLAN_CIPHER_SUITE_WEP104;
765 		}
766 
767 		if (have_mfp) {
768 			suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
769 			suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
770 			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
771 			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
772 		}
773 
774 		for (r = 0; r < local->hw.n_cipher_schemes; r++) {
775 			suites[w++] = cs[r].cipher;
776 			if (WARN_ON(cs[r].pn_len > IEEE80211_MAX_PN_LEN)) {
777 				kfree(suites);
778 				return -EINVAL;
779 			}
780 		}
781 	}
782 
783 	local->hw.wiphy->cipher_suites = suites;
784 	local->hw.wiphy->n_cipher_suites = w;
785 	local->wiphy_ciphers_allocated = true;
786 
787 	return 0;
788 }
789 
790 int ieee80211_register_hw(struct ieee80211_hw *hw)
791 {
792 	struct ieee80211_local *local = hw_to_local(hw);
793 	int result, i;
794 	enum ieee80211_band band;
795 	int channels, max_bitrates;
796 	bool supp_ht, supp_vht;
797 	netdev_features_t feature_whitelist;
798 	struct cfg80211_chan_def dflt_chandef = {};
799 
800 	if (ieee80211_hw_check(hw, QUEUE_CONTROL) &&
801 	    (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
802 	     local->hw.offchannel_tx_hw_queue >= local->hw.queues))
803 		return -EINVAL;
804 
805 	if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
806 	    (!local->ops->tdls_channel_switch ||
807 	     !local->ops->tdls_cancel_channel_switch ||
808 	     !local->ops->tdls_recv_channel_switch))
809 		return -EOPNOTSUPP;
810 
811 #ifdef CONFIG_PM
812 	if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
813 		return -EINVAL;
814 #endif
815 
816 	if (!local->use_chanctx) {
817 		for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
818 			const struct ieee80211_iface_combination *comb;
819 
820 			comb = &local->hw.wiphy->iface_combinations[i];
821 
822 			if (comb->num_different_channels > 1)
823 				return -EINVAL;
824 		}
825 	} else {
826 		/*
827 		 * WDS is currently prohibited when channel contexts are used
828 		 * because there's no clear definition of which channel WDS
829 		 * type interfaces use
830 		 */
831 		if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
832 			return -EINVAL;
833 
834 		/* DFS is not supported with multi-channel combinations yet */
835 		for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
836 			const struct ieee80211_iface_combination *comb;
837 
838 			comb = &local->hw.wiphy->iface_combinations[i];
839 
840 			if (comb->radar_detect_widths &&
841 			    comb->num_different_channels > 1)
842 				return -EINVAL;
843 		}
844 	}
845 
846 	/* Only HW csum features are currently compatible with mac80211 */
847 	feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
848 			    NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA |
849 			    NETIF_F_GSO_SOFTWARE;
850 	if (WARN_ON(hw->netdev_features & ~feature_whitelist))
851 		return -EINVAL;
852 
853 	if (hw->max_report_rates == 0)
854 		hw->max_report_rates = hw->max_rates;
855 
856 	local->rx_chains = 1;
857 
858 	/*
859 	 * generic code guarantees at least one band,
860 	 * set this very early because much code assumes
861 	 * that hw.conf.channel is assigned
862 	 */
863 	channels = 0;
864 	max_bitrates = 0;
865 	supp_ht = false;
866 	supp_vht = false;
867 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
868 		struct ieee80211_supported_band *sband;
869 
870 		sband = local->hw.wiphy->bands[band];
871 		if (!sband)
872 			continue;
873 
874 		if (!dflt_chandef.chan) {
875 			cfg80211_chandef_create(&dflt_chandef,
876 						&sband->channels[0],
877 						NL80211_CHAN_NO_HT);
878 			/* init channel we're on */
879 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
880 				local->hw.conf.chandef = dflt_chandef;
881 				local->_oper_chandef = dflt_chandef;
882 			}
883 			local->monitor_chandef = dflt_chandef;
884 		}
885 
886 		channels += sband->n_channels;
887 
888 		if (max_bitrates < sband->n_bitrates)
889 			max_bitrates = sband->n_bitrates;
890 		supp_ht = supp_ht || sband->ht_cap.ht_supported;
891 		supp_vht = supp_vht || sband->vht_cap.vht_supported;
892 
893 		if (sband->ht_cap.ht_supported)
894 			local->rx_chains =
895 				max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
896 				    local->rx_chains);
897 
898 		/* TODO: consider VHT for RX chains, hopefully it's the same */
899 	}
900 
901 	/* if low-level driver supports AP, we also support VLAN */
902 	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
903 		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
904 		hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
905 	}
906 
907 	/* mac80211 always supports monitor */
908 	hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
909 	hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
910 
911 	/* mac80211 doesn't support more than one IBSS interface right now */
912 	for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
913 		const struct ieee80211_iface_combination *c;
914 		int j;
915 
916 		c = &hw->wiphy->iface_combinations[i];
917 
918 		for (j = 0; j < c->n_limits; j++)
919 			if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
920 			    c->limits[j].max > 1)
921 				return -EINVAL;
922 	}
923 
924 	local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
925 				      sizeof(void *) * channels, GFP_KERNEL);
926 	if (!local->int_scan_req)
927 		return -ENOMEM;
928 
929 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
930 		if (!local->hw.wiphy->bands[band])
931 			continue;
932 		local->int_scan_req->rates[band] = (u32) -1;
933 	}
934 
935 #ifndef CONFIG_MAC80211_MESH
936 	/* mesh depends on Kconfig, but drivers should set it if they want */
937 	local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
938 #endif
939 
940 	/* if the underlying driver supports mesh, mac80211 will (at least)
941 	 * provide routing of mesh authentication frames to userspace */
942 	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
943 		local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
944 
945 	/* mac80211 supports control port protocol changing */
946 	local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
947 
948 	if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
949 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
950 	} else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) {
951 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
952 		if (hw->max_signal <= 0) {
953 			result = -EINVAL;
954 			goto fail_wiphy_register;
955 		}
956 	}
957 
958 	/*
959 	 * Calculate scan IE length -- we need this to alloc
960 	 * memory and to subtract from the driver limit. It
961 	 * includes the DS Params, (extended) supported rates, and HT
962 	 * information -- SSID is the driver's responsibility.
963 	 */
964 	local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
965 		3 /* DS Params */;
966 	if (supp_ht)
967 		local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
968 
969 	if (supp_vht)
970 		local->scan_ies_len +=
971 			2 + sizeof(struct ieee80211_vht_cap);
972 
973 	if (!local->ops->hw_scan) {
974 		/* For hw_scan, driver needs to set these up. */
975 		local->hw.wiphy->max_scan_ssids = 4;
976 		local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
977 	}
978 
979 	/*
980 	 * If the driver supports any scan IEs, then assume the
981 	 * limit includes the IEs mac80211 will add, otherwise
982 	 * leave it at zero and let the driver sort it out; we
983 	 * still pass our IEs to the driver but userspace will
984 	 * not be allowed to in that case.
985 	 */
986 	if (local->hw.wiphy->max_scan_ie_len)
987 		local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
988 
989 	WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
990 					 local->hw.n_cipher_schemes));
991 
992 	result = ieee80211_init_cipher_suites(local);
993 	if (result < 0)
994 		goto fail_wiphy_register;
995 
996 	if (!local->ops->remain_on_channel)
997 		local->hw.wiphy->max_remain_on_channel_duration = 5000;
998 
999 	/* mac80211 based drivers don't support internal TDLS setup */
1000 	if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
1001 		local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
1002 
1003 	/* mac80211 supports eCSA, if the driver supports STA CSA at all */
1004 	if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA))
1005 		local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING;
1006 
1007 	local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
1008 
1009 	result = wiphy_register(local->hw.wiphy);
1010 	if (result < 0)
1011 		goto fail_wiphy_register;
1012 
1013 	/*
1014 	 * We use the number of queues for feature tests (QoS, HT) internally
1015 	 * so restrict them appropriately.
1016 	 */
1017 	if (hw->queues > IEEE80211_MAX_QUEUES)
1018 		hw->queues = IEEE80211_MAX_QUEUES;
1019 
1020 	local->workqueue =
1021 		alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
1022 	if (!local->workqueue) {
1023 		result = -ENOMEM;
1024 		goto fail_workqueue;
1025 	}
1026 
1027 	/*
1028 	 * The hardware needs headroom for sending the frame,
1029 	 * and we need some headroom for passing the frame to monitor
1030 	 * interfaces, but never both at the same time.
1031 	 */
1032 	local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1033 				   IEEE80211_TX_STATUS_HEADROOM);
1034 
1035 	debugfs_hw_add(local);
1036 
1037 	/*
1038 	 * if the driver doesn't specify a max listen interval we
1039 	 * use 5 which should be a safe default
1040 	 */
1041 	if (local->hw.max_listen_interval == 0)
1042 		local->hw.max_listen_interval = 5;
1043 
1044 	local->hw.conf.listen_interval = local->hw.max_listen_interval;
1045 
1046 	local->dynamic_ps_forced_timeout = -1;
1047 
1048 	if (!local->hw.txq_ac_max_pending)
1049 		local->hw.txq_ac_max_pending = 64;
1050 
1051 	result = ieee80211_wep_init(local);
1052 	if (result < 0)
1053 		wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
1054 			    result);
1055 
1056 	local->hw.conf.flags = IEEE80211_CONF_IDLE;
1057 
1058 	ieee80211_led_init(local);
1059 
1060 	rtnl_lock();
1061 
1062 	result = ieee80211_init_rate_ctrl_alg(local,
1063 					      hw->rate_control_algorithm);
1064 	if (result < 0) {
1065 		wiphy_debug(local->hw.wiphy,
1066 			    "Failed to initialize rate control algorithm\n");
1067 		goto fail_rate;
1068 	}
1069 
1070 	/* add one default STA interface if supported */
1071 	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
1072 	    !ieee80211_hw_check(hw, NO_AUTO_VIF)) {
1073 		result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL,
1074 					  NL80211_IFTYPE_STATION, NULL);
1075 		if (result)
1076 			wiphy_warn(local->hw.wiphy,
1077 				   "Failed to add default virtual iface\n");
1078 	}
1079 
1080 	rtnl_unlock();
1081 
1082 	local->network_latency_notifier.notifier_call =
1083 		ieee80211_max_network_latency;
1084 	result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
1085 				     &local->network_latency_notifier);
1086 	if (result)
1087 		goto fail_pm_qos;
1088 
1089 #ifdef CONFIG_INET
1090 	local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
1091 	result = register_inetaddr_notifier(&local->ifa_notifier);
1092 	if (result)
1093 		goto fail_ifa;
1094 #endif
1095 
1096 #if IS_ENABLED(CONFIG_IPV6)
1097 	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
1098 	result = register_inet6addr_notifier(&local->ifa6_notifier);
1099 	if (result)
1100 		goto fail_ifa6;
1101 #endif
1102 
1103 	return 0;
1104 
1105 #if IS_ENABLED(CONFIG_IPV6)
1106  fail_ifa6:
1107 #ifdef CONFIG_INET
1108 	unregister_inetaddr_notifier(&local->ifa_notifier);
1109 #endif
1110 #endif
1111 #if defined(CONFIG_INET) || defined(CONFIG_IPV6)
1112  fail_ifa:
1113 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1114 			       &local->network_latency_notifier);
1115 #endif
1116  fail_pm_qos:
1117 	rtnl_lock();
1118 	rate_control_deinitialize(local);
1119 	ieee80211_remove_interfaces(local);
1120  fail_rate:
1121 	rtnl_unlock();
1122 	ieee80211_led_exit(local);
1123 	ieee80211_wep_free(local);
1124 	destroy_workqueue(local->workqueue);
1125  fail_workqueue:
1126 	wiphy_unregister(local->hw.wiphy);
1127  fail_wiphy_register:
1128 	if (local->wiphy_ciphers_allocated)
1129 		kfree(local->hw.wiphy->cipher_suites);
1130 	kfree(local->int_scan_req);
1131 	return result;
1132 }
1133 EXPORT_SYMBOL(ieee80211_register_hw);
1134 
1135 void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
1136 			struct net_device *napi_dev,
1137 			int (*poll)(struct napi_struct *, int),
1138 			int weight)
1139 {
1140 	struct ieee80211_local *local = hw_to_local(hw);
1141 
1142 	netif_napi_add(napi_dev, napi, poll, weight);
1143 	local->napi = napi;
1144 }
1145 EXPORT_SYMBOL_GPL(ieee80211_napi_add);
1146 
1147 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1148 {
1149 	struct ieee80211_local *local = hw_to_local(hw);
1150 
1151 	tasklet_kill(&local->tx_pending_tasklet);
1152 	tasklet_kill(&local->tasklet);
1153 
1154 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1155 			       &local->network_latency_notifier);
1156 #ifdef CONFIG_INET
1157 	unregister_inetaddr_notifier(&local->ifa_notifier);
1158 #endif
1159 #if IS_ENABLED(CONFIG_IPV6)
1160 	unregister_inet6addr_notifier(&local->ifa6_notifier);
1161 #endif
1162 
1163 	rtnl_lock();
1164 
1165 	/*
1166 	 * At this point, interface list manipulations are fine
1167 	 * because the driver cannot be handing us frames any
1168 	 * more and the tasklet is killed.
1169 	 */
1170 	ieee80211_remove_interfaces(local);
1171 
1172 	rtnl_unlock();
1173 
1174 	cancel_work_sync(&local->restart_work);
1175 	cancel_work_sync(&local->reconfig_filter);
1176 	flush_work(&local->sched_scan_stopped_work);
1177 
1178 	ieee80211_clear_tx_pending(local);
1179 	rate_control_deinitialize(local);
1180 
1181 	if (skb_queue_len(&local->skb_queue) ||
1182 	    skb_queue_len(&local->skb_queue_unreliable))
1183 		wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1184 	skb_queue_purge(&local->skb_queue);
1185 	skb_queue_purge(&local->skb_queue_unreliable);
1186 
1187 	destroy_workqueue(local->workqueue);
1188 	wiphy_unregister(local->hw.wiphy);
1189 	ieee80211_wep_free(local);
1190 	ieee80211_led_exit(local);
1191 	kfree(local->int_scan_req);
1192 }
1193 EXPORT_SYMBOL(ieee80211_unregister_hw);
1194 
1195 static int ieee80211_free_ack_frame(int id, void *p, void *data)
1196 {
1197 	WARN_ONCE(1, "Have pending ack frames!\n");
1198 	kfree_skb(p);
1199 	return 0;
1200 }
1201 
1202 void ieee80211_free_hw(struct ieee80211_hw *hw)
1203 {
1204 	struct ieee80211_local *local = hw_to_local(hw);
1205 
1206 	mutex_destroy(&local->iflist_mtx);
1207 	mutex_destroy(&local->mtx);
1208 
1209 	if (local->wiphy_ciphers_allocated)
1210 		kfree(local->hw.wiphy->cipher_suites);
1211 
1212 	idr_for_each(&local->ack_status_frames,
1213 		     ieee80211_free_ack_frame, NULL);
1214 	idr_destroy(&local->ack_status_frames);
1215 
1216 	sta_info_stop(local);
1217 
1218 	ieee80211_free_led_names(local);
1219 
1220 	wiphy_free(local->hw.wiphy);
1221 }
1222 EXPORT_SYMBOL(ieee80211_free_hw);
1223 
1224 static int __init ieee80211_init(void)
1225 {
1226 	struct sk_buff *skb;
1227 	int ret;
1228 
1229 	BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1230 	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1231 		     IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1232 
1233 	ret = rc80211_minstrel_init();
1234 	if (ret)
1235 		return ret;
1236 
1237 	ret = rc80211_minstrel_ht_init();
1238 	if (ret)
1239 		goto err_minstrel;
1240 
1241 	ret = ieee80211_iface_init();
1242 	if (ret)
1243 		goto err_netdev;
1244 
1245 	return 0;
1246  err_netdev:
1247 	rc80211_minstrel_ht_exit();
1248  err_minstrel:
1249 	rc80211_minstrel_exit();
1250 
1251 	return ret;
1252 }
1253 
1254 static void __exit ieee80211_exit(void)
1255 {
1256 	rc80211_minstrel_ht_exit();
1257 	rc80211_minstrel_exit();
1258 
1259 	ieee80211s_stop();
1260 
1261 	ieee80211_iface_exit();
1262 
1263 	rcu_barrier();
1264 }
1265 
1266 
1267 subsys_initcall(ieee80211_init);
1268 module_exit(ieee80211_exit);
1269 
1270 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1271 MODULE_LICENSE("GPL");
1272